summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2011-11-16 20:24:41 +0100
committerWolfgang Denk <wd@denx.de>2011-11-16 20:24:41 +0100
commit0c2dd9a05bdcf3b2b4880509ec690116873fe158 (patch)
tree3deccd6143aa75c52096154f8f165feacb57fe56 /drivers/net
parent3844d1c782f9f3a5c72ccdbd4fa141f9c03d1121 (diff)
parent75acc4d7c1c9081e06d1197c6da01361cf1bce92 (diff)
downloadu-boot-imx-0c2dd9a05bdcf3b2b4880509ec690116873fe158.zip
u-boot-imx-0c2dd9a05bdcf3b2b4880509ec690116873fe158.tar.gz
u-boot-imx-0c2dd9a05bdcf3b2b4880509ec690116873fe158.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: arm, davinci: add DAVINCI_MMC_CLKID arm, davinci_emac: fix driver bug if more then 3 PHYs are detected arm, davinci: da850/dm365 lowlevel cleanup omap5: Add omap5_evm board build support. omap4/5: Add support for booting with CH. omap5: emif: Add emif/ddr configurations required for omap5 evm omap5: clocks: Add clocks support for omap5 platform. omap5: Add minimal support for omap5430. omap: Checkpatch fixes omap4: make omap4 code common for future reuse GCC4.6: Squash warnings in onenand_base.c GCC4.6: Fix common/usb.c on xscale OneNAND: Add simple OneNAND SPL PXA: vpac270: Enable the new generic MMC driver PXA: Cleanup serial_pxa PXA: Drop csb226 and innokom boards (unmaintained) m28evk: Fix comment about the number of RAM banks mx31: Fix checkpatch warnings in generic.c mx31: Use proper IO accessor for GPR register mx31: Remove duplicate definition for GPR register qong: Use generic function for configuring GPR register M28EVK: Enable USB HOST support iMX28: Add USB HOST driver iMX28: Add USB and USB PHY register definitions M28: Add memory detection into SPL iMX28: Fix ARM vector handling M28: Add doc/README.m28 documentation M28: Add MMC SPL iMX28: Add support for DENX M28EVK board iMX28: Add u-boot.sb target to Makefile iMX28: Add image header generator tool iMX28: Add driver for internal RTC iMX28: Add GPMI NAND driver iMX28: Add APBH DMA driver iMX28: Add SPI driver iMX28: Add GPIO control iMX28: Add I2C bus driver iMX28: Add PINMUX control FEC: Add support for iMX28 quirks iMX28: Add SSP MMC driver iMX28: Initial support for iMX28 CPU MX25: zmx25: GCC4.6 fix build warnings da850: add new config file for AM18xx BeagleBoard: config: Switch to ttyO2 OMAP3: Change omap3_evm maintainer devkit8000: Fix NAND SPL on boards with 256MB NAND integrator: enable Vpp and disable flash protection integrator: add system controller header integrator: make flash writeable on boot integrator: use io-accessors for board init integrator: move text offset to config integrator: pass configs for core modules ARM: remove superfluous setting of arch_number in board specific code. SPL: Allow ARM926EJS to avoid compiling in the CPU support code integrator: do not test first part of the memory arm: a320: fix broken timer ARM: define CONFIG_MACH_TYPE for all ronetix boards dm646x: pass board revision info to kernel dm646x: add new configuration for dm6467T arm, davinci: Fix setting of the SDRAM configuration register arm, davinci: Remove the duplication of LPSC functions arm, davinci: Rename AM1808 lowlevel functions to DA850 da8xxevm: fix build error ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/davinci_emac.c24
-rw-r--r--drivers/net/fec_mxc.c44
2 files changed, 58 insertions, 10 deletions
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index fa31159..36c33af 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -85,15 +85,17 @@ static int emac_rx_queue_active = 0;
/* Receive packet buffers */
static unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)];
-#define MAX_PHY 3
+#ifndef CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
+#define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT 3
+#endif
/* PHY address for a discovered PHY (0xff - not found) */
-static u_int8_t active_phy_addr[MAX_PHY] = { 0xff, 0xff, 0xff };
+static u_int8_t active_phy_addr[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
/* number of PHY found active */
static u_int8_t num_phy;
-phy_t phy[MAX_PHY];
+phy_t phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
static int davinci_eth_set_mac_addr(struct eth_device *dev)
{
@@ -160,9 +162,8 @@ static int davinci_eth_phy_detect(void)
int j;
unsigned int count = 0;
- active_phy_addr[0] = 0xff;
- active_phy_addr[1] = 0xff;
- active_phy_addr[2] = 0xff;
+ for (i = 0; i < CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT; i++)
+ active_phy_addr[i] = 0xff;
udelay(1000);
phy_act_state = readl(&adap_mdio->ALIVE);
@@ -175,7 +176,14 @@ static int davinci_eth_phy_detect(void)
for (i = 0, j = 0; i < 32; i++)
if (phy_act_state & (1 << i)) {
count++;
- active_phy_addr[j++] = i;
+ if (count < CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT) {
+ active_phy_addr[j++] = i;
+ } else {
+ printf("%s: to many PHYs detected.\n",
+ __func__);
+ count = 0;
+ break;
+ }
}
num_phy = count;
@@ -752,7 +760,7 @@ int davinci_emac_initialize(void)
if (!ret)
return(0);
else
- printf(" %d ETH PHY detected\n", ret);
+ debug_emac(" %d ETH PHY detected\n", ret);
/* Get PHY ID and initialize phy_ops for a detected PHY */
for (i = 0; i < num_phy; i++) {
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 0c0c7cd..b05a4c0 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -42,6 +42,14 @@ DECLARE_GLOBAL_DATA_PTR;
#define CONFIG_FEC_XCV_TYPE MII100
#endif
+/*
+ * The i.MX28 operates with packets in big endian. We need to swap them before
+ * sending and after receiving.
+ */
+#ifdef CONFIG_MX28
+#define CONFIG_FEC_MXC_SWAP_PACKET
+#endif
+
#undef DEBUG
struct nbuf {
@@ -51,6 +59,32 @@ struct nbuf {
uint8_t head[16]; /**< MAC header(6 + 6 + 2) + 2(aligned) */
};
+#ifdef CONFIG_FEC_MXC_SWAP_PACKET
+static void swap_packet(uint32_t *packet, int length)
+{
+ int i;
+
+ for (i = 0; i < DIV_ROUND_UP(length, 4); i++)
+ packet[i] = __swab32(packet[i]);
+}
+#endif
+
+/*
+ * The i.MX28 has two ethernet interfaces, but they are not equal.
+ * Only the first one can access the MDIO bus.
+ */
+#ifdef CONFIG_MX28
+static inline struct ethernet_regs *fec_miiphy_fec_to_eth(struct fec_priv *fec)
+{
+ return (struct ethernet_regs *)MXS_ENET0_BASE;
+}
+#else
+static inline struct ethernet_regs *fec_miiphy_fec_to_eth(struct fec_priv *fec)
+{
+ return fec->eth;
+}
+#endif
+
/*
* MII-interface related functions
*/
@@ -59,7 +93,7 @@ static int fec_miiphy_read(const char *dev, uint8_t phyAddr, uint8_t regAddr,
{
struct eth_device *edev = eth_get_dev_by_name(dev);
struct fec_priv *fec = (struct fec_priv *)edev->priv;
- struct ethernet_regs *eth = fec->eth;
+ struct ethernet_regs *eth = fec_miiphy_fec_to_eth(fec);
uint32_t reg; /* convenient holder for the PHY register */
uint32_t phy; /* convenient holder for the PHY */
@@ -117,7 +151,7 @@ static int fec_miiphy_write(const char *dev, uint8_t phyAddr, uint8_t regAddr,
{
struct eth_device *edev = eth_get_dev_by_name(dev);
struct fec_priv *fec = (struct fec_priv *)edev->priv;
- struct ethernet_regs *eth = fec->eth;
+ struct ethernet_regs *eth = fec_miiphy_fec_to_eth(fec);
uint32_t reg; /* convenient holder for the PHY register */
uint32_t phy; /* convenient holder for the PHY */
@@ -572,6 +606,9 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length)
* Note: We are always using the first buffer for transmission,
* the second will be empty and only used to stop the DMA engine
*/
+#ifdef CONFIG_FEC_MXC_SWAP_PACKET
+ swap_packet((uint32_t *)packet, length);
+#endif
writew(length, &fec->tbd_base[fec->tbd_index].data_length);
writel((uint32_t)packet, &fec->tbd_base[fec->tbd_index].data_pointer);
/*
@@ -668,6 +705,9 @@ static int fec_recv(struct eth_device *dev)
/*
* Fill the buffer and pass it to upper layers
*/
+#ifdef CONFIG_FEC_MXC_SWAP_PACKET
+ swap_packet((uint32_t *)frame->data, frame_length);
+#endif
memcpy(buff, frame->data, frame_length);
NetReceive(buff, frame_length);
len = frame_length;