Fix remaining CONFIG_COMMANDS

update comments
Fix coding style

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

4 files changed, 14 insertions, 21 deletions

diff --git a/drivers/net/cs8900.c b/drivers/net/cs8900.c
index 80c4ba2..55ef346 100644
--- a/drivers/net/cs8900.c
+++ b/drivers/net/cs8900.c
@@ -165,7 +165,7 @@ void cs8900_get_enetaddr (uchar * addr)
 				 addr[0], addr[1],
 				 addr[2], addr[3],
 				 addr[4], addr[5]) ;
-			debug ("### Set environment from HW MAC addr = \"%s\"\n",				ethaddr);
+			debug ("### Set environment from HW MAC addr = \"%s\"\n", ethaddr);
 			setenv ("ethaddr", ethaddr);
 		}
 
@@ -317,6 +317,6 @@ int cs8900_e2prom_write(unsigned char addr, unsigned short value)
 	return 0;
 }
 
-#endif	/* COMMANDS & CFG_NET */
+#endif	/* CONFIG_CMD_NET */
 
 #endif	/* CONFIG_DRIVER_CS8900 */
diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
index ecdcbd9..51cfb7e 100644
--- a/drivers/net/lan91c96.c
+++ b/drivers/net/lan91c96.c
@@ -36,12 +36,12 @@
  *   AUI/TP selection  ( mine has 10Base2/10BaseT select )
  *
  * Arguments:
- * 	io	= for the base address
+ *	io	= for the base address
  *	irq	= for the IRQ
  *
  * author:
- * 	Erik Stahlman				( erik@vt.edu )
- * 	Daris A Nevil				( dnevil@snmc.com )
+ *	Erik Stahlman				( erik@vt.edu )
+ *	Daris A Nevil				( dnevil@snmc.com )
  *
  *
  * Hardware multicast code from Peter Cammaert ( pc@denkart.be )
@@ -53,7 +53,7 @@
  *    o   lan91c96.c (Intel Diagnostic Manager driver)
  *
  * History:
- * 	04/30/03  Mathijs Haarman	Modified smc91111.c (u-boot version)
+ *	04/30/03  Mathijs Haarman	Modified smc91111.c (u-boot version)
  *					for lan91c96
  *---------------------------------------------------------------------------
  */
@@ -296,8 +296,8 @@ static int poll4int (byte mask, int timeout)
 /*
  * Function: smc_reset( void )
  * Purpose:
- *  	This sets the SMC91111 chip to its normal state, hopefully from whatever
- * 	mess that any other DOS driver has put it in.
+ *	This sets the SMC91111 chip to its normal state, hopefully from whatever
+ *	mess that any other DOS driver has put it in.
  *
  * Maybe I should reset more registers to defaults in here?  SOFTRST  should
  * do that for me.
@@ -397,7 +397,7 @@ static void smc_shutdown ()
  *	This sends the actual packet to the SMC9xxx chip.
  *
  * Algorithm:
- * 	First, see if a saved_skb is available.
+ *	First, see if a saved_skb is available.
  *		( this should NOT be called if there is no 'saved_skb'
  *	Now, find the packet number that the chip allocated
  *	Point the data pointers at it in memory
@@ -405,9 +405,9 @@ static void smc_shutdown ()
  *	Dump the packet to chip memory
  *	Check if a last byte is needed ( odd length packet )
  *		if so, set the control flag right
- * 	Tell the card to send it
+ *	Tell the card to send it
  *	Enable the transmit interrupt, so I know if it failed
- * 	Free the kernel data if I actually sent it.
+ *	Free the kernel data if I actually sent it.
  */
 static int smc_send_packet (volatile void *packet, int packet_length)
 {
@@ -865,7 +865,7 @@ static int smc_hw_init ()
 }
 #endif /* 0 */
 
-#endif /* COMMANDS & CFG_NET */
+#endif /* CONFIG_CMD_NET */
 
 
 /* smc_get_ethaddr (bd_t * bd)
diff --git a/drivers/net/netarm_eth.c b/drivers/net/netarm_eth.c
index a99ee5d..ecf45dc 100644
--- a/drivers/net/netarm_eth.c
+++ b/drivers/net/netarm_eth.c
@@ -29,7 +29,6 @@
 #include "netarm_eth.h"
 #include <asm/arch/netarm_registers.h>
 
-
 #if defined(CONFIG_CMD_NET)
 
 static int na_mii_poll_busy (void);
@@ -56,7 +55,6 @@ static void na_get_mac_addr (void)
 	setenv ("ethaddr", ethaddr);
 }
 
-
 static void na_mii_write (int reg, int value)
 {
 	int mii_addr;
@@ -355,6 +353,6 @@ extern int eth_send (volatile void *packet, int length)
 	return 1;
 }
 
-#endif /* COMMANDS & CFG_NET */
+#endif /* CONFIG_CMD_NET */
 
 #endif /* CONFIG_DRIVER_NETARMETH */
diff --git a/drivers/net/rtl8019.c b/drivers/net/rtl8019.c
index 409a69f..9d62cab 100644
--- a/drivers/net/rtl8019.c
+++ b/drivers/net/rtl8019.c
@@ -36,16 +36,13 @@
 
 #if defined(CONFIG_CMD_NET)
 
-
 /* packet page register access functions */
 
-
 static unsigned char get_reg (unsigned int regno)
 {
 	return (*(unsigned char *) regno);
 }
 
-
 static void put_reg (unsigned int regno, unsigned char val)
 {
 	*(volatile unsigned char *) regno = val;
@@ -91,7 +88,6 @@ void rtl8019_get_enetaddr (uchar * addr)
 	put_reg (RTL8019_COMMAND, RTL8019_PAGE0);
 }
 
-
 void eth_halt (void)
 {
 	put_reg (RTL8019_COMMAND, 0x01);
@@ -134,7 +130,6 @@ int eth_init (bd_t * bd)
 	return 0;
 }
 
-
 static unsigned char nic_to_pc (void)
 {
 	unsigned char rec_head_status;
@@ -277,6 +272,6 @@ extern int eth_send (volatile void *packet, int length)
 	return 0;
 }
 
-#endif /* COMMANDS & CFG_NET */
+#endif /* CONFIG_CMD_NET */
 
 #endif /* CONFIG_DRIVER_RTL8019 */