summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
authorShengzhou Liu <Shengzhou.Liu@freescale.com>2014-11-10 18:32:29 +0800
committerYork Sun <yorksun@freescale.com>2014-12-05 08:06:11 -0800
commit9b18e5199ec42f9dc62c0da7f4fe7554e199980d (patch)
tree4e008751897a988bf271b26814b5a2a8db775e8d /drivers/net
parent84baed2a2bdde3b2bf876d36cc966bd41ac67a6d (diff)
downloadu-boot-imx-9b18e5199ec42f9dc62c0da7f4fe7554e199980d.zip
u-boot-imx-9b18e5199ec42f9dc62c0da7f4fe7554e199980d.tar.gz
u-boot-imx-9b18e5199ec42f9dc62c0da7f4fe7554e199980d.tar.bz2
net/phy: Add support for CS4315/CS4340 PHY
Add support for Cortina CS4315/CS4340 10G PHY. - This driver loads CS43xx firmware from NOR/NAND/SPI/SD device to initialize Cortina PHY. - Cortina PHY has non-standard offset of PHY ID registers, thus we define own get_phy_id() to override default get_phy_id(). - To define macro CONFIG_PHY_CORTINA will enable this driver. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/phy/Makefile1
-rw-r--r--drivers/net/phy/cortina.c333
-rw-r--r--drivers/net/phy/phy.c3
3 files changed, 337 insertions, 0 deletions
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 9556536..f46bf00 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_PHYLIB) += phy.o
obj-$(CONFIG_PHYLIB_10G) += generic_10g.o
obj-$(CONFIG_PHY_ATHEROS) += atheros.o
obj-$(CONFIG_PHY_BROADCOM) += broadcom.o
+obj-$(CONFIG_PHY_CORTINA) += cortina.o
obj-$(CONFIG_PHY_DAVICOM) += davicom.o
obj-$(CONFIG_PHY_ET1011C) += et1011c.o
obj-$(CONFIG_PHY_LXT) += lxt.o
diff --git a/drivers/net/phy/cortina.c b/drivers/net/phy/cortina.c
new file mode 100644
index 0000000..254f056
--- /dev/null
+++ b/drivers/net/phy/cortina.c
@@ -0,0 +1,333 @@
+/*
+ * Cortina CS4315/CS4340 10G PHY drivers
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/err.h>
+#include <phy.h>
+#include <cortina.h>
+#ifdef CONFIG_SYS_CORTINA_FW_IN_NAND
+#include <nand.h>
+#elif defined(CONFIG_SYS_CORTINA_FW_IN_SPIFLASH)
+#include <spi_flash.h>
+#elif defined(CONFIG_SYS_CORTINA_FW_IN_MMC)
+#include <mmc.h>
+#endif
+
+#ifndef CONFIG_PHYLIB_10G
+#error The Cortina PHY needs 10G support
+#endif
+
+struct cortina_reg_config cortina_reg_cfg[] = {
+ /* CS4315_enable_sr_mode */
+ {VILLA_GLOBAL_MSEQCLKCTRL, 0x8004},
+ {VILLA_MSEQ_OPTIONS, 0xf},
+ {VILLA_MSEQ_PC, 0x0},
+ {VILLA_MSEQ_BANKSELECT, 0x4},
+ {VILLA_LINE_SDS_COMMON_SRX0_RX_CPA, 0x55},
+ {VILLA_LINE_SDS_COMMON_SRX0_RX_LOOP_FILTER, 0x30},
+ {VILLA_DSP_SDS_SERDES_SRX_DFE0_SELECT, 0x1},
+ {VILLA_DSP_SDS_DSP_COEF_DFE0_SELECT, 0x2},
+ {VILLA_LINE_SDS_COMMON_SRX0_RX_CPB, 0x2003},
+ {VILLA_DSP_SDS_SERDES_SRX_FFE_DELAY_CTRL, 0xF047},
+ {VILLA_MSEQ_ENABLE_MSB, 0x0000},
+ {VILLA_MSEQ_SPARE21_LSB, 0x6},
+ {VILLA_MSEQ_RESET_COUNT_LSB, 0x0},
+ {VILLA_MSEQ_SPARE12_MSB, 0x0000},
+ /*
+ * to invert the receiver path, uncomment the next line
+ * write (VILLA_MSEQ_SPARE12_MSB, 0x4000)
+ *
+ * SPARE2_LSB is used to configure the device while in sr mode to
+ * enable power savings and to use the optical module LOS signal.
+ * in power savings mode, the internal prbs checker can not be used.
+ * if the optical module LOS signal is used as an input to the micro
+ * code, then the micro code will wait until the optical module
+ * LOS = 0 before turning on the adaptive equalizer.
+ * Setting SPARE2_LSB bit 0 to 1 places the devie in power savings mode
+ * while setting bit 0 to 0 disables power savings mode.
+ * Setting SPARE2_LSB bit 2 to 0 configures the device to use the
+ * optical module LOS signal while setting bit 2 to 1 configures the
+ * device so that it will ignore the optical module LOS SPARE2_LSB = 0
+ */
+
+ /* enable power savings, ignore optical module LOS */
+ {VILLA_MSEQ_SPARE2_LSB, 0x5},
+
+ {VILLA_MSEQ_SPARE7_LSB, 0x1e},
+ {VILLA_MSEQ_BANKSELECT, 0x4},
+ {VILLA_MSEQ_SPARE9_LSB, 0x2},
+ {VILLA_MSEQ_SPARE3_LSB, 0x0F53},
+ {VILLA_MSEQ_SPARE3_MSB, 0x2006},
+ {VILLA_MSEQ_SPARE8_LSB, 0x3FF7},
+ {VILLA_MSEQ_SPARE8_MSB, 0x0A46},
+ {VILLA_MSEQ_COEF8_FFE0_LSB, 0xD500},
+ {VILLA_MSEQ_COEF8_FFE1_LSB, 0x0200},
+ {VILLA_MSEQ_COEF8_FFE2_LSB, 0xBA00},
+ {VILLA_MSEQ_COEF8_FFE3_LSB, 0x0100},
+ {VILLA_MSEQ_COEF8_FFE4_LSB, 0x0300},
+ {VILLA_MSEQ_COEF8_FFE5_LSB, 0x0300},
+ {VILLA_MSEQ_COEF8_DFE0_LSB, 0x0700},
+ {VILLA_MSEQ_COEF8_DFE0N_LSB, 0x0E00},
+ {VILLA_MSEQ_COEF8_DFE1_LSB, 0x0B00},
+ {VILLA_DSP_SDS_DSP_COEF_LARGE_LEAK, 0x2},
+ {VILLA_DSP_SDS_SERDES_SRX_DAC_ENABLEB_LSB, 0xD000},
+ {VILLA_MSEQ_POWER_DOWN_LSB, 0xFFFF},
+ {VILLA_MSEQ_POWER_DOWN_MSB, 0x0},
+ {VILLA_MSEQ_CAL_RX_SLICER, 0x80},
+ {VILLA_DSP_SDS_SERDES_SRX_DAC_BIAS_SELECT1_MSB, 0x3f},
+ {VILLA_GLOBAL_MSEQCLKCTRL, 0x4},
+ {VILLA_MSEQ_OPTIONS, 0x7},
+
+ /* set up min value for ffe1 */
+ {VILLA_MSEQ_COEF_INIT_SEL, 0x2},
+ {VILLA_DSP_SDS_DSP_PRECODEDINITFFE21, 0x41},
+
+ /* CS4315_sr_rx_pre_eq_set_4in */
+ {VILLA_GLOBAL_MSEQCLKCTRL, 0x8004},
+ {VILLA_MSEQ_OPTIONS, 0xf},
+ {VILLA_MSEQ_BANKSELECT, 0x4},
+ {VILLA_MSEQ_PC, 0x0},
+
+ /* for lengths from 3.5 to 4.5inches */
+ {VILLA_MSEQ_SERDES_PARAM_LSB, 0x0306},
+ {VILLA_MSEQ_SPARE25_LSB, 0x0306},
+ {VILLA_MSEQ_SPARE21_LSB, 0x2},
+ {VILLA_MSEQ_SPARE23_LSB, 0x2},
+ {VILLA_MSEQ_CAL_RX_DFE_EQ, 0x0},
+
+ {VILLA_GLOBAL_MSEQCLKCTRL, 0x4},
+ {VILLA_MSEQ_OPTIONS, 0x7},
+
+ /* CS4315_rx_drive_4inch */
+ /* for length 4inches */
+ {VILLA_GLOBAL_VILLA2_COMPATIBLE, 0x0000},
+ {VILLA_HOST_SDS_COMMON_STX0_TX_OUTPUT_CTRLA, 0x3023},
+ {VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLB, 0xc01E},
+
+ /* CS4315_tx_drive_4inch */
+ /* for length 4inches */
+ {VILLA_GLOBAL_VILLA2_COMPATIBLE, 0x0000},
+ {VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLA, 0x3023},
+ {VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLB, 0xc01E},
+};
+
+void cs4340_upload_firmware(struct phy_device *phydev)
+{
+ char line_temp[0x50] = {0};
+ char reg_addr[0x50] = {0};
+ char reg_data[0x50] = {0};
+ int i, line_cnt = 0, column_cnt = 0;
+ struct cortina_reg_config fw_temp;
+ char *addr = NULL;
+
+#if defined(CONFIG_SYS_CORTINA_FW_IN_NOR) || \
+ defined(CONFIG_SYS_CORTINA_FW_IN_REMOTE)
+
+ addr = (char *)CONFIG_CORTINA_FW_ADDR;
+#elif defined(CONFIG_SYS_CORTINA_FW_IN_NAND)
+ int ret;
+ size_t fw_length = CONFIG_CORTINA_FW_LENGTH;
+
+ addr = malloc(CONFIG_CORTINA_FW_LENGTH);
+ ret = nand_read(&nand_info[0], (loff_t)CONFIG_CORTINA_FW_ADDR,
+ &fw_length, (u_char *)addr);
+ if (ret == -EUCLEAN) {
+ printf("NAND read of Cortina firmware at 0x%x failed %d\n",
+ CONFIG_CORTINA_FW_ADDR, ret);
+ }
+#elif defined(CONFIG_SYS_CORTINA_FW_IN_SPIFLASH)
+ int ret;
+ struct spi_flash *ucode_flash;
+
+ addr = malloc(CONFIG_CORTINA_FW_LENGTH);
+ ucode_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+ CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+ if (!ucode_flash) {
+ puts("SF: probe for Cortina ucode failed\n");
+ } else {
+ ret = spi_flash_read(ucode_flash, CONFIG_CORTINA_FW_ADDR,
+ CONFIG_CORTINA_FW_LENGTH, addr);
+ if (ret)
+ puts("SF: read for Cortina ucode failed\n");
+ spi_flash_free(ucode_flash);
+ }
+#elif defined(CONFIG_SYS_CORTINA_FW_IN_MMC)
+ int dev = CONFIG_SYS_MMC_ENV_DEV;
+ u32 cnt = CONFIG_CORTINA_FW_LENGTH / 512;
+ u32 blk = CONFIG_CORTINA_FW_ADDR / 512;
+ struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
+
+ if (!mmc) {
+ puts("Failed to find MMC device for Cortina ucode\n");
+ } else {
+ addr = malloc(CONFIG_CORTINA_FW_LENGTH);
+ printf("MMC read: dev # %u, block # %u, count %u ...\n",
+ dev, blk, cnt);
+ mmc_init(mmc);
+ (void)mmc->block_dev.block_read(dev, blk, cnt, addr);
+ /* flush cache after read */
+ flush_cache((ulong)addr, cnt * 512);
+ }
+#endif
+
+ while (*addr != 'Q') {
+ i = 0;
+
+ while (*addr != 0x0a) {
+ line_temp[i++] = *addr++;
+ if (0x50 < i) {
+ printf("Not found Cortina PHY ucode at 0x%x\n",
+ CONFIG_CORTINA_FW_ADDR);
+ return;
+ }
+ }
+
+ addr++; /* skip '\n' */
+ line_cnt++;
+ column_cnt = i;
+ line_temp[column_cnt] = '\0';
+
+ if (CONFIG_CORTINA_FW_LENGTH < line_cnt)
+ return;
+
+ for (i = 0; i < column_cnt; i++) {
+ if (isspace(line_temp[i++]))
+ break;
+ }
+
+ memcpy(reg_addr, line_temp, i);
+ memcpy(reg_data, &line_temp[i], column_cnt - i);
+ strim(reg_addr);
+ strim(reg_data);
+ fw_temp.reg_addr = (simple_strtoul(reg_addr, NULL, 0)) & 0xffff;
+ fw_temp.reg_value = (simple_strtoul(reg_data, NULL, 0)) &
+ 0xffff;
+ phy_write(phydev, 0x00, fw_temp.reg_addr, fw_temp.reg_value);
+ }
+}
+
+int cs4340_phy_init(struct phy_device *phydev)
+{
+ int timeout = 100; /* 100ms */
+ int reg_value;
+
+ /* step1: BIST test */
+ phy_write(phydev, 0x00, VILLA_GLOBAL_MSEQCLKCTRL, 0x0004);
+ phy_write(phydev, 0x00, VILLA_GLOBAL_LINE_SOFT_RESET, 0x0000);
+ phy_write(phydev, 0x00, VILLA_GLOBAL_BIST_CONTROL, 0x0001);
+ while (--timeout) {
+ reg_value = phy_read(phydev, 0x00, VILLA_GLOBAL_BIST_STATUS);
+ if (reg_value & mseq_edc_bist_done) {
+ if (0 == (reg_value & mseq_edc_bist_fail))
+ break;
+ }
+ udelay(1000);
+ }
+
+ if (!timeout) {
+ printf("%s BIST mseq_edc_bist_done timeout!\n", __func__);
+ return -1;
+ }
+
+ /* setp2: upload ucode */
+ cs4340_upload_firmware(phydev);
+ reg_value = phy_read(phydev, 0x00, VILLA_GLOBAL_DWNLD_CHECKSUM_STATUS);
+ if (reg_value) {
+ debug("%s checksum status failed.\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+int cs4340_config(struct phy_device *phydev)
+{
+ cs4340_phy_init(phydev);
+ return 0;
+}
+
+int cs4340_startup(struct phy_device *phydev)
+{
+ phydev->link = 1;
+
+ /* For now just lie and say it's 10G all the time */
+ phydev->speed = SPEED_10000;
+ phydev->duplex = DUPLEX_FULL;
+ return 0;
+}
+
+struct phy_driver cs4340_driver = {
+ .name = "Cortina CS4315/CS4340",
+ .uid = PHY_UID_CS4340,
+ .mask = 0xfffffff0,
+ .features = PHY_10G_FEATURES,
+ .mmds = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |
+ MDIO_DEVS_PHYXS | MDIO_DEVS_AN |
+ MDIO_DEVS_VEND1 | MDIO_DEVS_VEND2),
+ .config = &cs4340_config,
+ .startup = &cs4340_startup,
+ .shutdown = &gen10g_shutdown,
+};
+
+int phy_cortina_init(void)
+{
+ phy_register(&cs4340_driver);
+ return 0;
+}
+
+int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id)
+{
+ int phy_reg;
+ bool is_cortina_phy = false;
+
+ switch (addr) {
+#ifdef CORTINA_PHY_ADDR1
+ case CORTINA_PHY_ADDR1:
+#endif
+#ifdef CORTINA_PHY_ADDR2
+ case CORTINA_PHY_ADDR2:
+#endif
+#ifdef CORTINA_PHY_ADDR3
+ case CORTINA_PHY_ADDR3:
+#endif
+#ifdef CORTINA_PHY_ADDR4
+ case CORTINA_PHY_ADDR4:
+#endif
+ is_cortina_phy = true;
+ break;
+ default:
+ break;
+ }
+
+ /* Cortina PHY has non-standard offset of PHY ID registers */
+ if (is_cortina_phy)
+ phy_reg = bus->read(bus, addr, 0, VILLA_GLOBAL_CHIP_ID_LSB);
+ else
+ phy_reg = bus->read(bus, addr, devad, MII_PHYSID1);
+
+ if (phy_reg < 0)
+ return -EIO;
+
+ *phy_id = (phy_reg & 0xffff) << 16;
+ if (is_cortina_phy)
+ phy_reg = bus->read(bus, addr, 0, VILLA_GLOBAL_CHIP_ID_MSB);
+ else
+ phy_reg = bus->read(bus, addr, devad, MII_PHYSID2);
+
+ if (phy_reg < 0)
+ return -EIO;
+
+ *phy_id |= (phy_reg & 0xffff);
+
+ return 0;
+}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 467c972..5b04c85 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -448,6 +448,9 @@ int phy_init(void)
#ifdef CONFIG_PHY_BROADCOM
phy_broadcom_init();
#endif
+#ifdef CONFIG_PHY_CORTINA
+ phy_cortina_init();
+#endif
#ifdef CONFIG_PHY_DAVICOM
phy_davicom_init();
#endif