diff options
author | Stephan Linz <linz@li-pro.net> | 2012-02-25 00:48:31 +0000 |
---|---|---|
committer | Joe Hershberger <joe.hershberger@ni.com> | 2012-04-04 09:36:19 -0500 |
commit | df48265036dc7332d488ded34aa298f7f5bf3513 (patch) | |
tree | 178742a61fd899d5b4b2a0fe55943dc8291053a8 /drivers/net/xilinx_ll_temac.c | |
parent | 1295f08c7e778a258cba779263ba03b0c86f8a6e (diff) | |
download | u-boot-imx-df48265036dc7332d488ded34aa298f7f5bf3513.zip u-boot-imx-df48265036dc7332d488ded34aa298f7f5bf3513.tar.gz u-boot-imx-df48265036dc7332d488ded34aa298f7f5bf3513.tar.bz2 |
net: ll_temac: Add LL TEMAC driver to u-boot
Xilinx LocalLink Tri-Mode Ether MAC driver can be
used by Xilinx Microblaze or Xilinx ppc405/440 in
SDMA and FIFO mode. DCR or XPS bus can be used.
The driver uses and requires MII and PHYLIB.
CP: 4 warnings: 'Use of volatile is usually wrong'
I won't fix this, because it depends on the network
driver subsystem.
Reported-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Stephan Linz <linz@li-pro.net>
Diffstat (limited to 'drivers/net/xilinx_ll_temac.c')
-rw-r--r-- | drivers/net/xilinx_ll_temac.c | 399 |
1 files changed, 399 insertions, 0 deletions
diff --git a/drivers/net/xilinx_ll_temac.c b/drivers/net/xilinx_ll_temac.c new file mode 100644 index 0000000..85660c0 --- /dev/null +++ b/drivers/net/xilinx_ll_temac.c @@ -0,0 +1,399 @@ +/* + * Xilinx xps_ll_temac ethernet driver for u-boot + * + * supports SDMA or FIFO access and MDIO bus communication + * + * Copyright (C) 2011 - 2012 Stephan Linz <linz@li-pro.net> + * Copyright (C) 2008 - 2011 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2008 - 2011 PetaLogix + * + * Based on Yoshio Kashiwagi kashiwagi@co-nss.co.jp driver + * Copyright (C) 2008 Nissin Systems Co.,Ltd. + * March 2008 created + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * [0]: http://www.xilinx.com/support/documentation + * + * [S]: [0]/ip_documentation/xps_ll_temac.pdf + * [A]: [0]/application_notes/xapp1041.pdf + */ + +#include <config.h> +#include <common.h> +#include <net.h> +#include <netdev.h> +#include <malloc.h> +#include <asm/io.h> +#include <miiphy.h> + +#include "xilinx_ll_temac.h" +#include "xilinx_ll_temac_fifo.h" +#include "xilinx_ll_temac_sdma.h" +#include "xilinx_ll_temac_mdio.h" + +#if !defined(CONFIG_MII) +# error "LL_TEMAC requires MII -- missing CONFIG_MII" +#endif + +#if !defined(CONFIG_PHYLIB) +# error "LL_TEMAC requires PHYLIB -- missing CONFIG_PHYLIB" +#endif + +struct ll_temac_info { + int flags; + unsigned long base_addr; + unsigned long ctrl_addr; + char *devname; + unsigned int phyaddr; + char *mdio_busname; +}; + +/* Ethernet interface ready status */ +int ll_temac_check_status(struct temac_reg *regs, u32 mask) +{ + unsigned timeout = 50; /* 1usec * 50 = 50usec */ + + /* + * Quote from LL TEMAC documentation: The bits in the RDY + * register are asserted when there is no access in progress. + * When an access is in progress, a bit corresponding to the + * type of access is automatically de-asserted. The bit is + * automatically re-asserted when the access is complete. + */ + while (timeout && (!(in_be32(®s->rdy) & mask))) { + timeout--; + udelay(1); + } + + if (!timeout) { + printf("%s: Timeout on 0x%08x @%p\n", __func__, + mask, ®s->rdy); + return 1; + } + + return 0; +} + +/* + * Indirect write to ll_temac. + * + * http://www.xilinx.com/support/documentation/ip_documentation/xps_ll_temac.pdf + * page 23, second paragraph, The use of CTL0 register or CTL1 register + */ +int ll_temac_indirect_set(struct temac_reg *regs, u16 regn, u32 reg_data) +{ + out_be32(®s->lsw, (reg_data & MLSW_MASK)); + out_be32(®s->ctl, CTL_WEN | (regn & CTL_ADDR_MASK)); + + if (ll_temac_check_status(regs, RSE_CFG_WR)) + return 0; + + return 1; +} + +/* + * Indirect read from ll_temac. + * + * http://www.xilinx.com/support/documentation/ip_documentation/xps_ll_temac.pdf + * page 23, second paragraph, The use of CTL0 register or CTL1 register + */ +int ll_temac_indirect_get(struct temac_reg *regs, u16 regn, u32* reg_data) +{ + out_be32(®s->ctl, (regn & CTL_ADDR_MASK)); + + if (ll_temac_check_status(regs, RSE_CFG_RR)) + return 0; + + *reg_data = in_be32(®s->lsw) & MLSW_MASK; + return 1; +} + +/* setting sub-controller and ll_temac to proper setting */ +static int ll_temac_setup_ctrl(struct eth_device *dev) +{ + struct ll_temac *ll_temac = dev->priv; + struct temac_reg *regs = (struct temac_reg *)dev->iobase; + + if (ll_temac->ctrlreset && ll_temac->ctrlreset(dev)) + return 0; + + if (ll_temac->ctrlinit && ll_temac->ctrlinit(dev)) + return 0; + + /* Promiscuous mode disable */ + if (!ll_temac_indirect_set(regs, TEMAC_AFM, 0)) + return 0; + + /* Enable Receiver - RX bit */ + if (!ll_temac_indirect_set(regs, TEMAC_RCW1, RCW1_RX)) + return 0; + + /* Enable Transmitter - TX bit */ + if (!ll_temac_indirect_set(regs, TEMAC_TC, TC_TX)) + return 0; + + return 1; +} + +/* + * Configure ll_temac based on negotiated speed and duplex + * reported by PHY handling code + */ +static int ll_temac_adjust_link(struct eth_device *dev) +{ + unsigned int speed, emmc_reg; + struct temac_reg *regs = (struct temac_reg *)dev->iobase; + struct ll_temac *ll_temac = dev->priv; + struct phy_device *phydev = ll_temac->phydev; + + if (!phydev->link) { + printf("%s: No link.\n", phydev->dev->name); + return 0; + } + + switch (phydev->speed) { + case 1000: + speed = EMMC_LSPD_1000; + break; + case 100: + speed = EMMC_LSPD_100; + break; + case 10: + speed = EMMC_LSPD_10; + break; + default: + return 0; + } + + if (!ll_temac_indirect_get(regs, TEMAC_EMMC, &emmc_reg)) + return 0; + + emmc_reg &= ~EMMC_LSPD_MASK; + emmc_reg |= speed; + + if (!ll_temac_indirect_set(regs, TEMAC_EMMC, emmc_reg)) + return 0; + + printf("%s: PHY is %s with %dbase%s, %s%s\n", + dev->name, phydev->drv->name, + phydev->speed, (phydev->port == PORT_TP) ? "T" : "X", + (phydev->duplex) ? "FDX" : "HDX", + (phydev->port == PORT_OTHER) ? ", unkown mode" : ""); + + return 1; +} + +/* setup mac addr */ +static int ll_temac_setup_mac_addr(struct eth_device *dev) +{ + struct temac_reg *regs = (struct temac_reg *)dev->iobase; + u32 val; + + /* set up unicast MAC address filter */ + val = ((dev->enetaddr[3] << 24) | (dev->enetaddr[2] << 16) | + (dev->enetaddr[1] << 8) | (dev->enetaddr[0])); + val &= UAW0_UADDR_MASK; + + if (!ll_temac_indirect_set(regs, TEMAC_UAW0, val)) + return 1; + + val = ((dev->enetaddr[5] << 8) | dev->enetaddr[4]); + val &= UAW1_UADDR_MASK; + + if (!ll_temac_indirect_set(regs, TEMAC_UAW1, val)) + return 1; + + return 0; +} + +/* halt device */ +static void ll_temac_halt(struct eth_device *dev) +{ + struct ll_temac *ll_temac = dev->priv; + struct temac_reg *regs = (struct temac_reg *)dev->iobase; + + /* Disable Receiver */ + ll_temac_indirect_set(regs, TEMAC_RCW0, 0); + + /* Disable Transmitter */ + ll_temac_indirect_set(regs, TEMAC_TC, 0); + + if (ll_temac->ctrlhalt) + ll_temac->ctrlhalt(dev); + + /* Shut down the PHY, as needed */ + phy_shutdown(ll_temac->phydev); +} + +static int ll_temac_init(struct eth_device *dev, bd_t *bis) +{ + struct ll_temac *ll_temac = dev->priv; + + printf("%s: Xilinx XPS LocalLink Tri-Mode Ether MAC #%d at 0x%08X.\n", + dev->name, dev->index, dev->iobase); + + if (!ll_temac_setup_ctrl(dev)) + return -1; + + /* Start up the PHY */ + phy_startup(ll_temac->phydev); + + if (!ll_temac_adjust_link(dev)) { + ll_temac_halt(dev); + return -1; + } + + /* If there's no link, fail */ + return ll_temac->phydev->link ? 0 : -1; +} + +/* + * Discover which PHY is attached to the device, and configure it + * properly. If the PHY is not recognized, then return 0 + * (failure). Otherwise, return 1 + */ +static int ll_temac_phy_init(struct eth_device *dev) +{ + struct ll_temac *ll_temac = dev->priv; + struct phy_device *phydev; + unsigned int supported = PHY_GBIT_FEATURES; + + /* interface - look at driver/net/tsec.c */ + phydev = phy_connect(ll_temac->bus, ll_temac->phyaddr, + dev, PHY_INTERFACE_MODE_NONE); + + phydev->supported &= supported; + phydev->advertising = phydev->supported; + + ll_temac->phydev = phydev; + + phy_config(phydev); + + return 1; +} + +/* + * Initialize a single ll_temac devices + * + * Returns the result of ll_temac phy interface that were initialized + */ +int xilinx_ll_temac_initialize(bd_t *bis, struct ll_temac_info *devinf) +{ + struct eth_device *dev; + struct ll_temac *ll_temac; + + dev = calloc(1, sizeof(*dev)); + if (dev == NULL) + return 0; + + ll_temac = calloc(1, sizeof(struct ll_temac)); + if (ll_temac == NULL) { + free(dev); + return 0; + } + + /* use given name or generate its own unique name */ + if (devinf->devname) { + strncpy(dev->name, devinf->devname, NAMESIZE); + } else { + snprintf(dev->name, NAMESIZE, "lltemac.%lx", devinf->base_addr); + devinf->devname = dev->name; + } + + dev->iobase = devinf->base_addr; + + dev->priv = ll_temac; + dev->init = ll_temac_init; + dev->halt = ll_temac_halt; + dev->write_hwaddr = ll_temac_setup_mac_addr; + + ll_temac->ctrladdr = devinf->ctrl_addr; + if (devinf->flags & XILINX_LL_TEMAC_M_SDMA_PLB) { +#if defined(CONFIG_XILINX_440) || defined(CONFIG_XILINX_405) + if (devinf->flags & XILINX_LL_TEMAC_M_SDMA_DCR) { + ll_temac_collect_xldcr_sdma_reg_addr(dev); + ll_temac->in32 = ll_temac_xldcr_in32; + ll_temac->out32 = ll_temac_xldcr_out32; + } else +#endif + { + ll_temac_collect_xlplb_sdma_reg_addr(dev); + ll_temac->in32 = ll_temac_xlplb_in32; + ll_temac->out32 = ll_temac_xlplb_out32; + } + ll_temac->ctrlinit = ll_temac_init_sdma; + ll_temac->ctrlhalt = ll_temac_halt_sdma; + ll_temac->ctrlreset = ll_temac_reset_sdma; + dev->recv = ll_temac_recv_sdma; + dev->send = ll_temac_send_sdma; + } else { + ll_temac->in32 = NULL; + ll_temac->out32 = NULL; + ll_temac->ctrlinit = NULL; + ll_temac->ctrlhalt = NULL; + ll_temac->ctrlreset = ll_temac_reset_fifo; + dev->recv = ll_temac_recv_fifo; + dev->send = ll_temac_send_fifo; + } + + /* Link to specified MDIO bus */ + strncpy(ll_temac->mdio_busname, devinf->mdio_busname, MDIO_NAME_LEN); + ll_temac->bus = miiphy_get_dev_by_name(ll_temac->mdio_busname); + + /* Looking for a valid PHY address if it is not yet set */ + if (devinf->phyaddr == -1) + ll_temac->phyaddr = ll_temac_phy_addr(ll_temac->bus); + else + ll_temac->phyaddr = devinf->phyaddr; + + eth_register(dev); + + /* Try to initialize PHY here, and return */ + return ll_temac_phy_init(dev); +} + +/* + * Initialize a single ll_temac device with its mdio bus behind ll_temac + * + * Returns 1 if the ll_temac device and the mdio bus were initialized + * otherwise returns 0 + */ +int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags, + unsigned long ctrl_addr) +{ + struct ll_temac_info devinf; + struct ll_temac_mdio_info mdioinf; + int ret; + + /* prepare the internal driver informations */ + devinf.flags = flags; + devinf.base_addr = base_addr; + devinf.ctrl_addr = ctrl_addr; + devinf.devname = NULL; + devinf.phyaddr = -1; + + mdioinf.name = devinf.mdio_busname = NULL; + mdioinf.regs = (struct temac_reg *)devinf.base_addr; + + ret = xilinx_ll_temac_mdio_initialize(bis, &mdioinf); + if (ret >= 0) { + + /* + * If there was no MDIO bus name then take over the + * new automaticaly generated by the MDIO init code. + */ + if (mdioinf.name != devinf.mdio_busname) + devinf.mdio_busname = mdioinf.name; + + ret = xilinx_ll_temac_initialize(bis, &devinf); + if (ret > 0) + return 1; + + } + + return 0; +} |