[PATCH] Added support for Xilinx Emac community driver

1 files changed, 128 insertions, 0 deletions

diff --git a/drivers/net/xilinx_emac.h b/drivers/net/xilinx_emac.h
new file mode 100644
index 0000000..ab4d212
--- /dev/null
+++ b/drivers/net/xilinx_emac.h
@@ -0,0 +1,128 @@
+/*
+ * (C) Copyright 2007 Michal Simek
+ *
+ * Michal  SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Based on Xilinx drivers
+ *
+ */
+
+typedef struct {
+	u32 RegBaseAddress;	/* Base address of registers */
+	u32 DataBaseAddress;	/* Base address of data for FIFOs */
+} XPacketFifoV100b;
+
+typedef struct {
+	u32 BaseAddress;	/* Base address (of IPIF) */
+	u32 IsStarted;		/* Device is currently started 0-no, 1-yes */
+	XPacketFifoV100b RecvFifo;	/* FIFO used to receive frames */
+	XPacketFifoV100b SendFifo;	/* FIFO used to send frames */
+
+} XEmac;
+
+#define XIIF_V123B_IISR_OFFSET	   32UL /* IP interrupt status register */
+#define XIIF_V123B_RESET_MASK		0xAUL
+#define XIIF_V123B_RESETR_OFFSET	64UL /* reset register */
+
+/* This constant is used with the Reset Register */
+#define XPF_RESET_FIFO_MASK             0x0000000A
+#define XPF_COUNT_STATUS_REG_OFFSET     4UL
+
+/*  * These constants are used with the Occupancy/Vacancy Count Register. This
+ * register also contains FIFO status  */
+#define XPF_COUNT_MASK                  0x0000FFFF
+#define XPF_DEADLOCK_MASK               0x20000000
+
+/* Offset of the MAC registers from the IPIF base address */
+#define XEM_REG_OFFSET	   0x1100UL
+
+/*
+ * Register offsets for the Ethernet MAC. Each register is 32 bits.
+ */
+#define XEM_ECR_OFFSET	  (XEM_REG_OFFSET + 0x4)	/* MAC Control */
+#define XEM_SAH_OFFSET	  (XEM_REG_OFFSET + 0xC)	/* Station addr, high */
+#define XEM_SAL_OFFSET	  (XEM_REG_OFFSET + 0x10)	/* Station addr, low */
+#define XEM_RPLR_OFFSET	  (XEM_REG_OFFSET + 0x1C)	/* Rx packet length */
+#define XEM_TPLR_OFFSET	  (XEM_REG_OFFSET + 0x20)	/* Tx packet length */
+#define XEM_TSR_OFFSET	  (XEM_REG_OFFSET + 0x24)	/* Tx status */
+
+
+
+#define XEM_PFIFO_OFFSET	0x2000UL
+#define XEM_PFIFO_TXREG_OFFSET	(XEM_PFIFO_OFFSET + 0x0) /* Tx registers */
+#define XEM_PFIFO_RXREG_OFFSET	(XEM_PFIFO_OFFSET + 0x10) /* Rx registers */
+#define XEM_PFIFO_TXDATA_OFFSET	(XEM_PFIFO_OFFSET + 0x100) /* Tx keyhole */
+#define XEM_PFIFO_RXDATA_OFFSET	(XEM_PFIFO_OFFSET + 0x200) /* Rx keyhole */
+
+
+/*
+ * EMAC Interrupt Registers (Status and Enable) masks. These registers are
+ * part of the IPIF IP Interrupt registers
+ */
+/* A mask for all transmit interrupts, used in polled mode */
+#define XEM_EIR_XMIT_ALL_MASK	(XEM_EIR_XMIT_DONE_MASK |	    \
+				 XEM_EIR_XMIT_ERROR_MASK |	    \
+				 XEM_EIR_XMIT_SFIFO_EMPTY_MASK |    \
+				 XEM_EIR_XMIT_LFIFO_FULL_MASK)
+
+#define XEM_EIR_XMIT_DONE_MASK	       0x00000001UL /* Xmit complete */
+#define XEM_EIR_RECV_DONE_MASK	       0x00000002UL /* Recv complete */
+#define XEM_EIR_XMIT_ERROR_MASK	       0x00000004UL /* Xmit error */
+#define XEM_EIR_RECV_ERROR_MASK	       0x00000008UL /* Recv error */
+#define XEM_EIR_XMIT_SFIFO_EMPTY_MASK  0x00000010UL /* Xmit status fifo empty */
+#define XEM_EIR_RECV_LFIFO_EMPTY_MASK  0x00000020UL /* Recv length fifo empty */
+#define XEM_EIR_XMIT_LFIFO_FULL_MASK   0x00000040UL /* Xmit length fifo full */
+#define XEM_EIR_RECV_LFIFO_OVER_MASK   0x00000080UL 	/* Recv length fifo
+							 * overrun */
+#define XEM_EIR_RECV_LFIFO_UNDER_MASK  0x00000100UL 	/* Recv length fifo
+							 * underrun */
+#define XEM_EIR_XMIT_SFIFO_OVER_MASK   0x00000200UL 	/* Xmit status fifo
+							 * overrun */
+#define XEM_EIR_XMIT_SFIFO_UNDER_MASK  0x00000400UL	/* Transmit status fifo
+							 * underrun */
+#define XEM_EIR_XMIT_LFIFO_OVER_MASK   0x00000800UL	/* Transmit length fifo
+							 * overrun */
+#define XEM_EIR_XMIT_LFIFO_UNDER_MASK  0x00001000UL	/* Transmit length fifo
+							 * underrun */
+#define XEM_EIR_XMIT_PAUSE_MASK	       0x00002000UL	/* Transmit pause pkt
+							 * received */
+
+/*
+ * EMAC Control Register (ECR)
+ */
+#define XEM_ECR_FULL_DUPLEX_MASK	 0x80000000UL	/* Full duplex mode */
+#define XEM_ECR_XMIT_RESET_MASK		 0x40000000UL	/* Reset transmitter */
+#define XEM_ECR_XMIT_ENABLE_MASK	 0x20000000UL	/* Enable transmitter */
+#define XEM_ECR_RECV_RESET_MASK		 0x10000000UL	/* Reset receiver */
+#define XEM_ECR_RECV_ENABLE_MASK	 0x08000000UL	/* Enable receiver */
+#define XEM_ECR_PHY_ENABLE_MASK		 0x04000000UL	/* Enable PHY */
+#define XEM_ECR_XMIT_PAD_ENABLE_MASK	 0x02000000UL	/* Enable xmit pad
+							 * insert */
+#define XEM_ECR_XMIT_FCS_ENABLE_MASK	 0x01000000UL	/* Enable xmit FCS
+							 * insert */
+#define XEM_ECR_UNICAST_ENABLE_MASK	 0x00020000UL	/* Enable unicast
+							 * addr */
+#define XEM_ECR_BROAD_ENABLE_MASK	 0x00008000UL	/* Enable broadcast
+							 * addr */
+
+/* Transmit Status Register (TSR) */
+#define XEM_TSR_EXCESS_DEFERRAL_MASK 0x80000000UL /* Transmit excess deferral */
+#define XEM_TSR_LATE_COLLISION_MASK  0x01000000UL /* Transmit late collision */