summaryrefslogtreecommitdiff
path: root/drivers/net/tsec.c
diff options
context:
space:
mode:
authorMingkai Hu <Mingkai.hu@freescale.com>2011-01-27 12:52:46 +0800
committerAndy Fleming <afleming@freescale.com>2011-04-20 13:44:46 -0500
commit907519108cd6f45aa067feea6fedd2743739342b (patch)
tree03d723714dd3a17a18ca413da4ffb5c00a4461c2 /drivers/net/tsec.c
parenta32a6be28fbbec19b6581609844ca3ec313b9d81 (diff)
downloadu-boot-imx-907519108cd6f45aa067feea6fedd2743739342b.zip
u-boot-imx-907519108cd6f45aa067feea6fedd2743739342b.tar.gz
u-boot-imx-907519108cd6f45aa067feea6fedd2743739342b.tar.bz2
tsec: arrange the code to avoid useless function declaration
This is merely a rearrangement. No changes to the code, except to remove now-useless declarations. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Detlev Zundel <dzu@denx.de>
Diffstat (limited to 'drivers/net/tsec.c')
-rw-r--r--drivers/net/tsec.c855
1 files changed, 415 insertions, 440 deletions
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index a2705e1..a3857b3 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -44,31 +44,6 @@ static RTXBD rtx __attribute__ ((aligned(8)));
#error "rtx must be 64-bit aligned"
#endif
-static int tsec_send(struct eth_device *dev,
- volatile void *packet, int length);
-static int tsec_recv(struct eth_device *dev);
-static int tsec_init(struct eth_device *dev, bd_t * bd);
-static int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info);
-static void tsec_halt(struct eth_device *dev);
-static void init_registers(tsec_t *regs);
-static void startup_tsec(struct eth_device *dev);
-static int init_phy(struct eth_device *dev);
-void write_phy_reg(struct tsec_private *priv, uint regnum, uint value);
-uint read_phy_reg(struct tsec_private *priv, uint regnum);
-static struct phy_info *get_phy_info(struct eth_device *dev);
-static void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
-static void adjust_link(struct eth_device *dev);
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
- && !defined(BITBANGMII)
-static int tsec_miiphy_write(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short value);
-static int tsec_miiphy_read(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value);
-#endif
-#ifdef CONFIG_MCAST_TFTP
-static int tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set);
-#endif
-
/* Default initializations for TSEC controllers. */
static struct tsec_info_struct tsec_info[] = {
@@ -95,140 +70,6 @@ static struct tsec_info_struct tsec_info[] = {
#endif
};
-/*
- * Initialize all the TSEC devices
- *
- * Returns the number of TSEC devices that were initialized
- */
-int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsecs, int num)
-{
- int i;
- int ret, count = 0;
-
- for (i = 0; i < num; i++) {
- ret = tsec_initialize(bis, &tsecs[i]);
- if (ret > 0)
- count += ret;
- }
-
- return count;
-}
-
-int tsec_standard_init(bd_t *bis)
-{
- return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info));
-}
-
-/* Initialize device structure. Returns success if PHY
- * initialization succeeded (i.e. if it recognizes the PHY)
- */
-static int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info)
-{
- struct eth_device *dev;
- int i;
- struct tsec_private *priv;
-
- dev = (struct eth_device *)malloc(sizeof *dev);
-
- if (NULL == dev)
- return 0;
-
- memset(dev, 0, sizeof *dev);
-
- priv = (struct tsec_private *)malloc(sizeof(*priv));
-
- if (NULL == priv)
- return 0;
-
- privlist[num_tsecs++] = priv;
- priv->regs = tsec_info->regs;
- priv->phyregs = tsec_info->miiregs;
- priv->phyregs_sgmii = tsec_info->miiregs_sgmii;
-
- priv->phyaddr = tsec_info->phyaddr;
- priv->flags = tsec_info->flags;
-
- sprintf(dev->name, tsec_info->devname);
- dev->iobase = 0;
- dev->priv = priv;
- dev->init = tsec_init;
- dev->halt = tsec_halt;
- dev->send = tsec_send;
- dev->recv = tsec_recv;
-#ifdef CONFIG_MCAST_TFTP
- dev->mcast = tsec_mcast_addr;
-#endif
-
- /* Tell u-boot to get the addr from the env */
- for (i = 0; i < 6; i++)
- dev->enetaddr[i] = 0;
-
- eth_register(dev);
-
- /* Reset the MAC */
- setbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
- udelay(2); /* Soft Reset must be asserted for 3 TX clocks */
- clrbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
- && !defined(BITBANGMII)
- miiphy_register(dev->name, tsec_miiphy_read, tsec_miiphy_write);
-#endif
-
- /* Try to initialize PHY here, and return */
- return init_phy(dev);
-}
-
-/* Initializes data structures and registers for the controller,
- * and brings the interface up. Returns the link status, meaning
- * that it returns success if the link is up, failure otherwise.
- * This allows u-boot to find the first active controller.
- */
-static int tsec_init(struct eth_device *dev, bd_t * bd)
-{
- uint tempval;
- char tmpbuf[MAC_ADDR_LEN];
- int i;
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
-
- /* Make sure the controller is stopped */
- tsec_halt(dev);
-
- /* Init MACCFG2. Defaults to GMII */
- out_be32(&regs->maccfg2, MACCFG2_INIT_SETTINGS);
-
- /* Init ECNTRL */
- out_be32(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
-
- /* Copy the station address into the address registers.
- * Backwards, because little endian MACS are dumb */
- for (i = 0; i < MAC_ADDR_LEN; i++) {
- tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i];
- }
- tempval = (tmpbuf[0] << 24) | (tmpbuf[1] << 16) | (tmpbuf[2] << 8) |
- tmpbuf[3];
-
- out_be32(&regs->macstnaddr1, tempval);
-
- tempval = *((uint *) (tmpbuf + 4));
-
- out_be32(&regs->macstnaddr2, tempval);
-
- /* reset the indices to zero */
- rxIdx = 0;
- txIdx = 0;
-
- /* Clear out (for the most part) the other registers */
- init_registers(regs);
-
- /* Ready the device for tx/rx */
- startup_tsec(dev);
-
- /* If there's no link, fail */
- return (priv->link ? 0 : -1);
-}
-
/* Writes the given phy's reg with value, using the specified MDIO regs */
static void tsec_local_mdio_write(tsec_mdio_t *phyregs, uint addr,
uint reg, uint value)
@@ -243,7 +84,6 @@ static void tsec_local_mdio_write(tsec_mdio_t *phyregs, uint addr,
;
}
-
/* Provide the default behavior of writing the PHY of this ethernet device */
#define write_phy_reg(priv, regnum, value) \
tsec_local_mdio_write(priv->phyregs,priv->phyaddr,regnum,value)
@@ -311,46 +151,6 @@ static void tsec_configure_serdes(struct tsec_private *priv)
CONFIG_TSEC_TBICR_SETTINGS);
}
-/* Discover which PHY is attached to the device, and configure it
- * properly. If the PHY is not recognized, then return 0
- * (failure). Otherwise, return 1
- */
-static int init_phy(struct eth_device *dev)
-{
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- struct phy_info *curphy;
- tsec_t *regs = priv->regs;
-
- /* Assign a Physical address to the TBI */
- out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);
-
- /* Reset MII (due to new addresses) */
- out_be32(&priv->phyregs->miimcfg, MIIMCFG_RESET);
- out_be32(&priv->phyregs->miimcfg, MIIMCFG_INIT_VALUE);
- while (in_be32(&priv->phyregs->miimind) & MIIMIND_BUSY)
- ;
-
- /* Get the cmd structure corresponding to the attached
- * PHY */
- curphy = get_phy_info(dev);
-
- if (curphy == NULL) {
- priv->phyinfo = NULL;
- printf("%s: No PHY found\n", dev->name);
-
- return 0;
- }
-
- if (in_be32(&regs->ecntrl) & ECNTRL_SGMII_MODE)
- tsec_configure_serdes(priv);
-
- priv->phyinfo = curphy;
-
- phy_run_commands(priv, priv->phyinfo->config);
-
- return 1;
-}
-
/*
* Returns which value to write to the control register.
* For 10/100, the value is slightly different
@@ -866,246 +666,6 @@ static uint mii_m88e1111s_setmode(uint mii_reg, struct tsec_private *priv)
return mii_data;
}
-/* Initialized required registers to appropriate values, zeroing
- * those we don't care about (unless zero is bad, in which case,
- * choose a more appropriate value)
- */
-static void init_registers(tsec_t *regs)
-{
- /* Clear IEVENT */
- out_be32(&regs->ievent, IEVENT_INIT_CLEAR);
-
- out_be32(&regs->imask, IMASK_INIT_CLEAR);
-
- out_be32(&regs->hash.iaddr0, 0);
- out_be32(&regs->hash.iaddr1, 0);
- out_be32(&regs->hash.iaddr2, 0);
- out_be32(&regs->hash.iaddr3, 0);
- out_be32(&regs->hash.iaddr4, 0);
- out_be32(&regs->hash.iaddr5, 0);
- out_be32(&regs->hash.iaddr6, 0);
- out_be32(&regs->hash.iaddr7, 0);
-
- out_be32(&regs->hash.gaddr0, 0);
- out_be32(&regs->hash.gaddr1, 0);
- out_be32(&regs->hash.gaddr2, 0);
- out_be32(&regs->hash.gaddr3, 0);
- out_be32(&regs->hash.gaddr4, 0);
- out_be32(&regs->hash.gaddr5, 0);
- out_be32(&regs->hash.gaddr6, 0);
- out_be32(&regs->hash.gaddr7, 0);
-
- out_be32(&regs->rctrl, 0x00000000);
-
- /* Init RMON mib registers */
- memset((void *)&(regs->rmon), 0, sizeof(rmon_mib_t));
-
- out_be32(&regs->rmon.cam1, 0xffffffff);
- out_be32(&regs->rmon.cam2, 0xffffffff);
-
- out_be32(&regs->mrblr, MRBLR_INIT_SETTINGS);
-
- out_be32(&regs->minflr, MINFLR_INIT_SETTINGS);
-
- out_be32(&regs->attr, ATTR_INIT_SETTINGS);
- out_be32(&regs->attreli, ATTRELI_INIT_SETTINGS);
-
-}
-
-/* Configure maccfg2 based on negotiated speed and duplex
- * reported by PHY handling code
- */
-static void adjust_link(struct eth_device *dev)
-{
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
- u32 ecntrl, maccfg2;
-
- if (!priv->link) {
- printf("%s: No link.\n", dev->name);
- return;
- }
-
- /* clear all bits relative with interface mode */
- ecntrl = in_be32(&regs->ecntrl);
- ecntrl &= ~ECNTRL_R100;
-
- maccfg2 = in_be32(&regs->maccfg2);
- maccfg2 &= ~(MACCFG2_IF | MACCFG2_FULL_DUPLEX);
-
- if (priv->duplexity)
- maccfg2 |= MACCFG2_FULL_DUPLEX;
-
- switch (priv->speed) {
- case 1000:
- maccfg2 |= MACCFG2_GMII;
- break;
- case 100:
- case 10:
- maccfg2 |= MACCFG2_MII;
-
- /* Set R100 bit in all modes although
- * it is only used in RGMII mode
- */
- if (priv->speed == 100)
- ecntrl |= ECNTRL_R100;
- break;
- default:
- printf("%s: Speed was bad\n", dev->name);
- break;
- }
-
- out_be32(&regs->ecntrl, ecntrl);
- out_be32(&regs->maccfg2, maccfg2);
-
- printf("Speed: %d, %s duplex%s\n", priv->speed,
- (priv->duplexity) ? "full" : "half",
- (priv->flags & TSEC_FIBER) ? ", fiber mode" : "");
-}
-
-/* Set up the buffers and their descriptors, and bring up the
- * interface
- */
-static void startup_tsec(struct eth_device *dev)
-{
- int i;
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
-
- /* Point to the buffer descriptors */
- out_be32(&regs->tbase, (unsigned int)(&rtx.txbd[txIdx]));
- out_be32(&regs->rbase, (unsigned int)(&rtx.rxbd[rxIdx]));
-
- /* Initialize the Rx Buffer descriptors */
- for (i = 0; i < PKTBUFSRX; i++) {
- rtx.rxbd[i].status = RXBD_EMPTY;
- rtx.rxbd[i].length = 0;
- rtx.rxbd[i].bufPtr = (uint) NetRxPackets[i];
- }
- rtx.rxbd[PKTBUFSRX - 1].status |= RXBD_WRAP;
-
- /* Initialize the TX Buffer Descriptors */
- for (i = 0; i < TX_BUF_CNT; i++) {
- rtx.txbd[i].status = 0;
- rtx.txbd[i].length = 0;
- rtx.txbd[i].bufPtr = 0;
- }
- rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP;
-
- /* Start up the PHY */
- if(priv->phyinfo)
- phy_run_commands(priv, priv->phyinfo->startup);
-
- adjust_link(dev);
-
- /* Enable Transmit and Receive */
- setbits_be32(&regs->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN);
-
- /* Tell the DMA it is clear to go */
- setbits_be32(&regs->dmactrl, DMACTRL_INIT_SETTINGS);
- out_be32(&regs->tstat, TSTAT_CLEAR_THALT);
- out_be32(&regs->rstat, RSTAT_CLEAR_RHALT);
- clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
-}
-
-/* This returns the status bits of the device. The return value
- * is never checked, and this is what the 8260 driver did, so we
- * do the same. Presumably, this would be zero if there were no
- * errors
- */
-static int tsec_send(struct eth_device *dev, volatile void *packet, int length)
-{
- int i;
- int result = 0;
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
-
- /* Find an empty buffer descriptor */
- for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
- if (i >= TOUT_LOOP) {
- debug("%s: tsec: tx buffers full\n", dev->name);
- return result;
- }
- }
-
- rtx.txbd[txIdx].bufPtr = (uint) packet;
- rtx.txbd[txIdx].length = length;
- rtx.txbd[txIdx].status |=
- (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT);
-
- /* Tell the DMA to go */
- out_be32(&regs->tstat, TSTAT_CLEAR_THALT);
-
- /* Wait for buffer to be transmitted */
- for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
- if (i >= TOUT_LOOP) {
- debug("%s: tsec: tx error\n", dev->name);
- return result;
- }
- }
-
- txIdx = (txIdx + 1) % TX_BUF_CNT;
- result = rtx.txbd[txIdx].status & TXBD_STATS;
-
- return result;
-}
-
-static int tsec_recv(struct eth_device *dev)
-{
- int length;
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
-
- while (!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
-
- length = rtx.rxbd[rxIdx].length;
-
- /* Send the packet up if there were no errors */
- if (!(rtx.rxbd[rxIdx].status & RXBD_STATS)) {
- NetReceive(NetRxPackets[rxIdx], length - 4);
- } else {
- printf("Got error %x\n",
- (rtx.rxbd[rxIdx].status & RXBD_STATS));
- }
-
- rtx.rxbd[rxIdx].length = 0;
-
- /* Set the wrap bit if this is the last element in the list */
- rtx.rxbd[rxIdx].status =
- RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0);
-
- rxIdx = (rxIdx + 1) % PKTBUFSRX;
- }
-
- if (in_be32(&regs->ievent) & IEVENT_BSY) {
- out_be32(&regs->ievent, IEVENT_BSY);
- out_be32(&regs->rstat, RSTAT_CLEAR_RHALT);
- }
-
- return -1;
-
-}
-
-/* Stop the interface */
-static void tsec_halt(struct eth_device *dev)
-{
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
-
- clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
- setbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
-
- while ((in_be32(&regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC))
- != (IEVENT_GRSC | IEVENT_GTSC))
- ;
-
- clrbits_be32(&regs->maccfg1, MACCFG1_TX_EN | MACCFG1_RX_EN);
-
- /* Shut down the PHY, as needed */
- if(priv->phyinfo)
- phy_run_commands(priv, priv->phyinfo->shutdown);
-}
-
static struct phy_info phy_info_M88E1149S = {
0x1410ca,
"Marvell 88E1149S",
@@ -2025,3 +1585,418 @@ tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set)
return 0;
}
#endif /* Multicast TFTP ? */
+
+/* Initialized required registers to appropriate values, zeroing
+ * those we don't care about (unless zero is bad, in which case,
+ * choose a more appropriate value)
+ */
+static void init_registers(tsec_t *regs)
+{
+ /* Clear IEVENT */
+ out_be32(&regs->ievent, IEVENT_INIT_CLEAR);
+
+ out_be32(&regs->imask, IMASK_INIT_CLEAR);
+
+ out_be32(&regs->hash.iaddr0, 0);
+ out_be32(&regs->hash.iaddr1, 0);
+ out_be32(&regs->hash.iaddr2, 0);
+ out_be32(&regs->hash.iaddr3, 0);
+ out_be32(&regs->hash.iaddr4, 0);
+ out_be32(&regs->hash.iaddr5, 0);
+ out_be32(&regs->hash.iaddr6, 0);
+ out_be32(&regs->hash.iaddr7, 0);
+
+ out_be32(&regs->hash.gaddr0, 0);
+ out_be32(&regs->hash.gaddr1, 0);
+ out_be32(&regs->hash.gaddr2, 0);
+ out_be32(&regs->hash.gaddr3, 0);
+ out_be32(&regs->hash.gaddr4, 0);
+ out_be32(&regs->hash.gaddr5, 0);
+ out_be32(&regs->hash.gaddr6, 0);
+ out_be32(&regs->hash.gaddr7, 0);
+
+ out_be32(&regs->rctrl, 0x00000000);
+
+ /* Init RMON mib registers */
+ memset((void *)&(regs->rmon), 0, sizeof(rmon_mib_t));
+
+ out_be32(&regs->rmon.cam1, 0xffffffff);
+ out_be32(&regs->rmon.cam2, 0xffffffff);
+
+ out_be32(&regs->mrblr, MRBLR_INIT_SETTINGS);
+
+ out_be32(&regs->minflr, MINFLR_INIT_SETTINGS);
+
+ out_be32(&regs->attr, ATTR_INIT_SETTINGS);
+ out_be32(&regs->attreli, ATTRELI_INIT_SETTINGS);
+
+}
+
+/* Configure maccfg2 based on negotiated speed and duplex
+ * reported by PHY handling code
+ */
+static void adjust_link(struct eth_device *dev)
+{
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ tsec_t *regs = priv->regs;
+ u32 ecntrl, maccfg2;
+
+ if (!priv->link) {
+ printf("%s: No link.\n", dev->name);
+ return;
+ }
+
+ /* clear all bits relative with interface mode */
+ ecntrl = in_be32(&regs->ecntrl);
+ ecntrl &= ~ECNTRL_R100;
+
+ maccfg2 = in_be32(&regs->maccfg2);
+ maccfg2 &= ~(MACCFG2_IF | MACCFG2_FULL_DUPLEX);
+
+ if (priv->duplexity)
+ maccfg2 |= MACCFG2_FULL_DUPLEX;
+
+ switch (priv->speed) {
+ case 1000:
+ maccfg2 |= MACCFG2_GMII;
+ break;
+ case 100:
+ case 10:
+ maccfg2 |= MACCFG2_MII;
+
+ /* Set R100 bit in all modes although
+ * it is only used in RGMII mode
+ */
+ if (priv->speed == 100)
+ ecntrl |= ECNTRL_R100;
+ break;
+ default:
+ printf("%s: Speed was bad\n", dev->name);
+ break;
+ }
+
+ out_be32(&regs->ecntrl, ecntrl);
+ out_be32(&regs->maccfg2, maccfg2);
+
+ printf("Speed: %d, %s duplex%s\n", priv->speed,
+ (priv->duplexity) ? "full" : "half",
+ (priv->flags & TSEC_FIBER) ? ", fiber mode" : "");
+}
+
+/* Set up the buffers and their descriptors, and bring up the
+ * interface
+ */
+static void startup_tsec(struct eth_device *dev)
+{
+ int i;
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ tsec_t *regs = priv->regs;
+
+ /* Point to the buffer descriptors */
+ out_be32(&regs->tbase, (unsigned int)(&rtx.txbd[txIdx]));
+ out_be32(&regs->rbase, (unsigned int)(&rtx.rxbd[rxIdx]));
+
+ /* Initialize the Rx Buffer descriptors */
+ for (i = 0; i < PKTBUFSRX; i++) {
+ rtx.rxbd[i].status = RXBD_EMPTY;
+ rtx.rxbd[i].length = 0;
+ rtx.rxbd[i].bufPtr = (uint) NetRxPackets[i];
+ }
+ rtx.rxbd[PKTBUFSRX - 1].status |= RXBD_WRAP;
+
+ /* Initialize the TX Buffer Descriptors */
+ for (i = 0; i < TX_BUF_CNT; i++) {
+ rtx.txbd[i].status = 0;
+ rtx.txbd[i].length = 0;
+ rtx.txbd[i].bufPtr = 0;
+ }
+ rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP;
+
+ /* Start up the PHY */
+ if (priv->phyinfo)
+ phy_run_commands(priv, priv->phyinfo->startup);
+
+ adjust_link(dev);
+
+ /* Enable Transmit and Receive */
+ setbits_be32(&regs->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN);
+
+ /* Tell the DMA it is clear to go */
+ setbits_be32(&regs->dmactrl, DMACTRL_INIT_SETTINGS);
+ out_be32(&regs->tstat, TSTAT_CLEAR_THALT);
+ out_be32(&regs->rstat, RSTAT_CLEAR_RHALT);
+ clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
+}
+
+/* This returns the status bits of the device. The return value
+ * is never checked, and this is what the 8260 driver did, so we
+ * do the same. Presumably, this would be zero if there were no
+ * errors
+ */
+static int tsec_send(struct eth_device *dev, volatile void *packet, int length)
+{
+ int i;
+ int result = 0;
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ tsec_t *regs = priv->regs;
+
+ /* Find an empty buffer descriptor */
+ for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
+ if (i >= TOUT_LOOP) {
+ debug("%s: tsec: tx buffers full\n", dev->name);
+ return result;
+ }
+ }
+
+ rtx.txbd[txIdx].bufPtr = (uint) packet;
+ rtx.txbd[txIdx].length = length;
+ rtx.txbd[txIdx].status |=
+ (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT);
+
+ /* Tell the DMA to go */
+ out_be32(&regs->tstat, TSTAT_CLEAR_THALT);
+
+ /* Wait for buffer to be transmitted */
+ for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
+ if (i >= TOUT_LOOP) {
+ debug("%s: tsec: tx error\n", dev->name);
+ return result;
+ }
+ }
+
+ txIdx = (txIdx + 1) % TX_BUF_CNT;
+ result = rtx.txbd[txIdx].status & TXBD_STATS;
+
+ return result;
+}
+
+static int tsec_recv(struct eth_device *dev)
+{
+ int length;
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ tsec_t *regs = priv->regs;
+
+ while (!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
+
+ length = rtx.rxbd[rxIdx].length;
+
+ /* Send the packet up if there were no errors */
+ if (!(rtx.rxbd[rxIdx].status & RXBD_STATS)) {
+ NetReceive(NetRxPackets[rxIdx], length - 4);
+ } else {
+ printf("Got error %x\n",
+ (rtx.rxbd[rxIdx].status & RXBD_STATS));
+ }
+
+ rtx.rxbd[rxIdx].length = 0;
+
+ /* Set the wrap bit if this is the last element in the list */
+ rtx.rxbd[rxIdx].status =
+ RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0);
+
+ rxIdx = (rxIdx + 1) % PKTBUFSRX;
+ }
+
+ if (in_be32(&regs->ievent) & IEVENT_BSY) {
+ out_be32(&regs->ievent, IEVENT_BSY);
+ out_be32(&regs->rstat, RSTAT_CLEAR_RHALT);
+ }
+
+ return -1;
+
+}
+
+/* Stop the interface */
+static void tsec_halt(struct eth_device *dev)
+{
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ tsec_t *regs = priv->regs;
+
+ clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
+ setbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
+
+ while ((in_be32(&regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC))
+ != (IEVENT_GRSC | IEVENT_GTSC))
+ ;
+
+ clrbits_be32(&regs->maccfg1, MACCFG1_TX_EN | MACCFG1_RX_EN);
+
+ /* Shut down the PHY, as needed */
+ if (priv->phyinfo)
+ phy_run_commands(priv, priv->phyinfo->shutdown);
+}
+
+/* Initializes data structures and registers for the controller,
+ * and brings the interface up. Returns the link status, meaning
+ * that it returns success if the link is up, failure otherwise.
+ * This allows u-boot to find the first active controller.
+ */
+static int tsec_init(struct eth_device *dev, bd_t * bd)
+{
+ uint tempval;
+ char tmpbuf[MAC_ADDR_LEN];
+ int i;
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ tsec_t *regs = priv->regs;
+
+ /* Make sure the controller is stopped */
+ tsec_halt(dev);
+
+ /* Init MACCFG2. Defaults to GMII */
+ out_be32(&regs->maccfg2, MACCFG2_INIT_SETTINGS);
+
+ /* Init ECNTRL */
+ out_be32(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
+
+ /* Copy the station address into the address registers.
+ * Backwards, because little endian MACS are dumb */
+ for (i = 0; i < MAC_ADDR_LEN; i++)
+ tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i];
+
+ tempval = (tmpbuf[0] << 24) | (tmpbuf[1] << 16) | (tmpbuf[2] << 8) |
+ tmpbuf[3];
+
+ out_be32(&regs->macstnaddr1, tempval);
+
+ tempval = *((uint *) (tmpbuf + 4));
+
+ out_be32(&regs->macstnaddr2, tempval);
+
+ /* reset the indices to zero */
+ rxIdx = 0;
+ txIdx = 0;
+
+ /* Clear out (for the most part) the other registers */
+ init_registers(regs);
+
+ /* Ready the device for tx/rx */
+ startup_tsec(dev);
+
+ /* If there's no link, fail */
+ return priv->link ? 0 : -1;
+}
+
+/* Discover which PHY is attached to the device, and configure it
+ * properly. If the PHY is not recognized, then return 0
+ * (failure). Otherwise, return 1
+ */
+static int init_phy(struct eth_device *dev)
+{
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ struct phy_info *curphy;
+ tsec_t *regs = priv->regs;
+
+ /* Assign a Physical address to the TBI */
+ out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);
+
+ /* Reset MII (due to new addresses) */
+ out_be32(&priv->phyregs->miimcfg, MIIMCFG_RESET);
+ out_be32(&priv->phyregs->miimcfg, MIIMCFG_INIT_VALUE);
+ while (in_be32(&priv->phyregs->miimind) & MIIMIND_BUSY)
+ ;
+
+ /* Get the cmd structure corresponding to the attached
+ * PHY */
+ curphy = get_phy_info(dev);
+
+ if (curphy == NULL) {
+ priv->phyinfo = NULL;
+ printf("%s: No PHY found\n", dev->name);
+
+ return 0;
+ }
+
+ if (in_be32(&regs->ecntrl) & ECNTRL_SGMII_MODE)
+ tsec_configure_serdes(priv);
+
+ priv->phyinfo = curphy;
+
+ phy_run_commands(priv, priv->phyinfo->config);
+
+ return 1;
+}
+
+/* Initialize device structure. Returns success if PHY
+ * initialization succeeded (i.e. if it recognizes the PHY)
+ */
+static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info)
+{
+ struct eth_device *dev;
+ int i;
+ struct tsec_private *priv;
+
+ dev = (struct eth_device *)malloc(sizeof *dev);
+
+ if (NULL == dev)
+ return 0;
+
+ memset(dev, 0, sizeof *dev);
+
+ priv = (struct tsec_private *)malloc(sizeof(*priv));
+
+ if (NULL == priv)
+ return 0;
+
+ privlist[num_tsecs++] = priv;
+ priv->regs = tsec_info->regs;
+ priv->phyregs = tsec_info->miiregs;
+ priv->phyregs_sgmii = tsec_info->miiregs_sgmii;
+
+ priv->phyaddr = tsec_info->phyaddr;
+ priv->flags = tsec_info->flags;
+
+ sprintf(dev->name, tsec_info->devname);
+ dev->iobase = 0;
+ dev->priv = priv;
+ dev->init = tsec_init;
+ dev->halt = tsec_halt;
+ dev->send = tsec_send;
+ dev->recv = tsec_recv;
+#ifdef CONFIG_MCAST_TFTP
+ dev->mcast = tsec_mcast_addr;
+#endif
+
+ /* Tell u-boot to get the addr from the env */
+ for (i = 0; i < 6; i++)
+ dev->enetaddr[i] = 0;
+
+ eth_register(dev);
+
+ /* Reset the MAC */
+ setbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
+ udelay(2); /* Soft Reset must be asserted for 3 TX clocks */
+ clrbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
+ && !defined(BITBANGMII)
+ miiphy_register(dev->name, tsec_miiphy_read, tsec_miiphy_write);
+#endif
+
+ /* Try to initialize PHY here, and return */
+ return init_phy(dev);
+}
+
+/*
+ * Initialize all the TSEC devices
+ *
+ * Returns the number of TSEC devices that were initialized
+ */
+int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsecs, int num)
+{
+ int i;
+ int ret, count = 0;
+
+ for (i = 0; i < num; i++) {
+ ret = tsec_initialize(bis, &tsecs[i]);
+ if (ret > 0)
+ count += ret;
+ }
+
+ return count;
+}
+
+int tsec_standard_init(bd_t *bis)
+{
+ return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info));
+}
+