mpc82xx: Remove SL8245 board and the now orpahned sk98lin network driver.

This code has compile problems and the company does not even exist any
more.  So we take the liberty to drop support for it.

Signed-off-by: Detlev Zundel <dzu@denx.de>
CC: Wolfgang Denk <wd@denx.de>
CC: Ben Warren <biggerbadderben@gmail.com>

1 files changed, 0 insertions, 288 deletions

diff --git a/drivers/net/sk98lin/sklm80.c b/drivers/net/sk98lin/sklm80.c
deleted file mode 100644
index 9f455f7..0000000
--- a/drivers/net/sk98lin/sklm80.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/******************************************************************************
- *
- * Name:	sklm80.c
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.20 $
- * Date:	$Date: 2002/08/13 09:16:27 $
- * Purpose:	Funktions to access Voltage and Temperature Sensor (LM80)
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * History:
- *
- *	$Log: sklm80.c,v $
- *	Revision 1.20  2002/08/13 09:16:27  rschmidt
- *	Changed return value for SkLm80ReadSensor() back to 'int'
- *	Editorial changes
- *
- *	Revision 1.19  2002/08/06 09:43:31  jschmalz
- *	Extensions and changes for Yukon
- *
- *	Revision 1.18  2002/08/02 12:26:57  rschmidt
- *	Editorial changes
- *
- *	Revision 1.17  1999/11/22 13:35:51  cgoos
- *	Changed license header to GPL.
- *
- *	Revision 1.16  1999/05/27 14:05:47  malthoff
- *	Fans: Set SenVal to 0 if the fan value is 0 or 0xff. Both values
- *	are outside the limits (0: div zero error, 0xff: value not in
- *	range, assume 0).
- *
- *	Revision 1.15  1999/05/27 13:38:51  malthoff
- *	Pervent from Division by zero errors.
- *
- *	Revision 1.14  1999/05/20 09:20:01  cgoos
- *	Changes for 1000Base-T (Fan sensors).
- *
- *	Revision 1.13  1998/10/22 09:48:14  gklug
- *	fix: SysKonnectFileId typo
- *
- *	Revision 1.12  1998/10/09 06:12:06  malthoff
- *	Remove ID_sccs by SysKonnectFileId.
- *
- *	Revision 1.11  1998/09/04 08:33:48  malthoff
- *	bug fix: SenState = SK_SEN_IDLE when
- *	leaving SK_SEN_VALEXT state
- *
- *	Revision 1.10  1998/08/20 12:02:10  gklug
- *	fix: compiler warnings type mismatch
- *
- *	Revision 1.9  1998/08/20 11:37:38  gklug
- *	chg: change Ioc to IoC
- *
- *	Revision 1.8  1998/08/19 12:20:58  gklug
- *	fix: remove struct from C files (see CCC)
- *
- *	Revision 1.7  1998/08/17 07:04:57  malthoff
- *	Take SkLm80RcvReg() function from ski2c.c.
- *	Add IoC parameter to BREAK_OR_WAIT() macro.
- *
- *	Revision 1.6  1998/08/14 07:11:28  malthoff
- *	remove pAc with pAC.
- *
- *	Revision 1.5  1998/08/14 06:46:55  gklug
- *	fix: temperature can get negative
- *
- *	Revision 1.4  1998/08/13 08:27:04  gklug
- *	add: temperature reading now o.k.
- *	fix: pSen declaration, SK_ERR_LOG call, ADDR macro
- *
- *	Revision 1.3  1998/08/13 07:28:21  gklug
- *	fix: pSen was wrong initialized
- *	add: correct conversion for voltage readings
- *
- *	Revision 1.2  1998/08/11 07:52:14  gklug
- *	add: Lm80 read sensor function
- *
- *	Revision 1.1  1998/07/17 09:57:12  gklug
- *	initial version
- *
- *
- *
- ******************************************************************************/
-
-
-#include <config.h>
-
-/*
-	LM80 functions
-*/
-static const char SysKonnectFileId[] =
-	"$Id: sklm80.c,v 1.20 2002/08/13 09:16:27 rschmidt Exp $" ;
-
-#include "h/skdrv1st.h"		/* Driver Specific Definitions */
-#include "h/lm80.h"
-#include "h/skdrv2nd.h"		/* Adapter Control- and Driver specific Def. */
-
-#ifdef	SK_DIAG
-#define	BREAK_OR_WAIT(pAC,IoC,Event)	SkI2cWait(pAC,IoC,Event)
-#else	/* nSK_DIAG */
-#define	BREAK_OR_WAIT(pAC,IoC,Event)	break
-#endif	/* nSK_DIAG */
-
-#ifdef	SK_DIAG
-/*
- * read the register 'Reg' from the device 'Dev'
- *
- * return	read error	-1
- *		success		the read value
- */
-int	SkLm80RcvReg(
-SK_IOC	IoC,		/* Adapter Context */
-int		Dev,		/* I2C device address */
-int		Reg)		/* register to read */
-{
-	int	Val = 0;
-	int	TempExt;
-
-	/* Signal device number */
-	if (SkI2cSndDev(IoC, Dev, I2C_WRITE)) {
-		return(-1);
-	}
-
-	if (SkI2cSndByte(IoC, Reg)) {
-		return(-1);
-	}
-
-	/* repeat start */
-	if (SkI2cSndDev(IoC, Dev, I2C_READ)) {
-		return(-1);
-	}
-
-	switch (Reg) {
-	case LM80_TEMP_IN:
-		Val = (int)SkI2cRcvByte(IoC, 1);
-
-		/* First: correct the value: it might be negative */
-		if ((Val & 0x80) != 0) {
-			/* Value is negative */
-			Val = Val - 256;
-		}
-		Val = Val * SK_LM80_TEMP_LSB;
-		SkI2cStop(IoC);
-
-		TempExt = (int)SkLm80RcvReg(IoC, LM80_ADDR, LM80_TEMP_CTRL);
-
-		if (Val > 0) {
-			Val += ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB);
-		}
-		else {
-			Val -= ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB);
-		}
-		return(Val);
-		break;
-	case LM80_VT0_IN:
-	case LM80_VT1_IN:
-	case LM80_VT2_IN:
-	case LM80_VT3_IN:
-		Val = (int)SkI2cRcvByte(IoC, 1) * SK_LM80_VT_LSB;
-		break;
-
-	default:
-		Val = (int)SkI2cRcvByte(IoC, 1);
-		break;
-	}
-
-	SkI2cStop(IoC);
-	return(Val);
-}
-#endif	/* SK_DIAG */
-
-/*
- * read a sensors value (LM80 specific)
- *
- * This function reads a sensors value from the I2C sensor chip LM80.
- * The sensor is defined by its index into the sensors database in the struct
- * pAC points to.
- *
- * Returns	1 if the read is completed
- *		0 if the read must be continued (I2C Bus still allocated)
- */
-int SkLm80ReadSensor(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context needed in level 1 and 2 */
-SK_SENSOR	*pSen)	/* Sensor to be read */
-{
-	SK_I32		Value;
-
-	switch (pSen->SenState) {
-	case SK_SEN_IDLE:
-		/* Send address to ADDR register */
-		SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, pSen->SenReg, 0);
-
-		pSen->SenState = SK_SEN_VALUE ;
-		BREAK_OR_WAIT(pAC, IoC, I2C_READ);
-
-	case SK_SEN_VALUE:
-		/* Read value from data register */
-		SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));
-
-		Value &= 0xff; /* only least significant byte is valid */
-
-		/* Do NOT check the Value against the thresholds */
-		/* Checking is done in the calling instance */
-
-		if (pSen->SenType == SK_SEN_VOLT) {
-			/* Voltage sensor */
-			pSen->SenValue = Value * SK_LM80_VT_LSB;
-			pSen->SenState = SK_SEN_IDLE ;
-			return(1);
-		}
-
-		if (pSen->SenType == SK_SEN_FAN) {
-			if (Value != 0 && Value != 0xff) {
-				/* Fan speed counter */
-				pSen->SenValue = SK_LM80_FAN_FAKTOR/Value;
-			}
-			else {
-				/* Indicate Fan error */
-				pSen->SenValue = 0;
-			}
-			pSen->SenState = SK_SEN_IDLE ;
-			return(1);
-		}
-
-		/* First: correct the value: it might be negative */
-		if ((Value & 0x80) != 0) {
-			/* Value is negative */
-			Value = Value - 256;
-		}
-
-		/* We have a temperature sensor and need to get the signed extension.
-		 * For now we get the extension from the last reading, so in the normal
-		 * case we won't see flickering temperatures.
-		 */
-		pSen->SenValue = (Value * SK_LM80_TEMP_LSB) +
-			(pSen->SenValue % SK_LM80_TEMP_LSB);
-
-		/* Send address to ADDR register */
-		SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, LM80_TEMP_CTRL, 0);
-
-		pSen->SenState = SK_SEN_VALEXT ;
-		BREAK_OR_WAIT(pAC, IoC, I2C_READ);
-
-	case SK_SEN_VALEXT:
-		/* Read value from data register */
-		SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));
-		Value &= LM80_TEMP_LSB_9; /* only bit 7 is valid */
-
-		/* cut the LSB bit */
-		pSen->SenValue = ((pSen->SenValue / SK_LM80_TEMP_LSB) *
-			SK_LM80_TEMP_LSB);
-
-		if (pSen->SenValue < 0) {
-			/* Value negative: The bit value must be subtracted */
-			pSen->SenValue -= ((Value >> 7) * SK_LM80_TEMPEXT_LSB);
-		}
-		else {
-			/* Value positive: The bit value must be added */
-			pSen->SenValue += ((Value >> 7) * SK_LM80_TEMPEXT_LSB);
-		}
-
-		pSen->SenState = SK_SEN_IDLE ;
-		return(1);
-
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E007, SKERR_I2C_E007MSG);
-		return(1);
-	}
-
-	/* Not completed */
-	return(0);
-}