Merge commit '87ddedd'

23 files changed, 10884 insertions, 0 deletions

diff --git a/drivers/net/sk98lin/h/lm80.h b/drivers/net/sk98lin/h/lm80.h
new file mode 100644
index 0000000..981a4ca
--- /dev/null
+++ b/drivers/net/sk98lin/h/lm80.h
@@ -0,0 +1,197 @@
+/******************************************************************************
+ *
+ * Name:	lm80.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.4 $
+ * Date:	$Date: 2002/04/25 11:04:10 $
+ * Purpose:	Contains all defines for the LM80 Chip
+ *		(National Semiconductor).
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *	$Log: lm80.h,v $
+ *	Revision 1.4  2002/04/25 11:04:10  rschmidt
+ *	Editorial changes
+ *
+ *	Revision 1.3  1999/11/22 13:41:19  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.2  1999/03/12 13:26:51  malthoff
+ *	remove __STDC__.
+ *
+ *	Revision 1.1  1998/06/19 09:28:31  malthoff
+ *	created.
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_LM80_H
+#define __INC_LM80_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif	/* __cplusplus */
+
+/* defines ********************************************************************/
+
+/*
+ * LM80 register definition
+ *
+ * All registers are 8 bit wide
+ */
+#define	LM80_CFG			0x00	/* Configuration Register */
+#define	LM80_ISRC_1			0x01	/* Interrupt Status Register 1 */
+#define LM80_ISRC_2			0x02	/* Interrupt Status Register 2 */
+#define LM80_IMSK_1			0x03	/* Interrupt Mask Register 1 */
+#define LM80_IMSK_2			0x04	/* Interrupt Mask Register 2 */
+#define LM80_FAN_CTRL		0x05	/* Fan Devisor/RST#/OS# Register */
+#define LM80_TEMP_CTRL		0x06	/* OS# Config, Temp Res. Reg */
+	/* 0x07 - 0x1f reserved	*/
+	/* current values */
+#define LM80_VT0_IN			0x20	/* current Voltage 0 value */
+#define LM80_VT1_IN			0x21	/* current Voltage 1 value */
+#define LM80_VT2_IN			0x22	/* current Voltage 2 value */
+#define LM80_VT3_IN			0x23	/* current Voltage 3 value */
+#define LM80_VT4_IN			0x24	/* current Voltage 4 value */
+#define LM80_VT5_IN			0x25	/* current Voltage 5 value */
+#define LM80_VT6_IN			0x26	/* current Voltage 6 value */
+#define LM80_TEMP_IN		0x27	/* current Temperature value */
+#define LM80_FAN1_IN		0x28	/* current Fan 1 count */
+#define LM80_FAN2_IN		0x29	/* current Fan 2 count */
+	/* limit values */
+#define LM80_VT0_HIGH_LIM	0x2a	/* high limit val for Voltage 0 */
+#define LM80_VT0_LOW_LIM	0x2b	/* low limit val for Voltage 0 */
+#define LM80_VT1_HIGH_LIM	0x2c	/* high limit val for Voltage 1 */
+#define LM80_VT1_LOW_LIM	0x2d	/* low limit val for Voltage 1 */
+#define LM80_VT2_HIGH_LIM	0x2e	/* high limit val for Voltage 2 */
+#define LM80_VT2_LOW_LIM	0x2f	/* low limit val for Voltage 2 */
+#define LM80_VT3_HIGH_LIM	0x30	/* high limit val for Voltage 3 */
+#define LM80_VT3_LOW_LIM	0x31	/* low limit val for Voltage 3 */
+#define LM80_VT4_HIGH_LIM	0x32	/* high limit val for Voltage 4 */
+#define LM80_VT4_LOW_LIM	0x33	/* low limit val for Voltage 4 */
+#define LM80_VT5_HIGH_LIM	0x34	/* high limit val for Voltage 5 */
+#define LM80_VT5_LOW_LIM	0x35	/* low limit val for Voltage 5 */
+#define LM80_VT6_HIGH_LIM	0x36	/* high limit val for Voltage 6 */
+#define LM80_VT6_LOW_LIM	0x37	/* low limit val for Voltage 6 */
+#define LM80_THOT_LIM_UP	0x38	/* hot temperature limit (high) */
+#define LM80_THOT_LIM_LO	0x39	/* hot temperature limit (low) */
+#define LM80_TOS_LIM_UP		0x3a	/* OS temperature limit (high) */
+#define LM80_TOS_LIM_LO		0x3b	/* OS temperature limit (low) */
+#define	LM80_FAN1_COUNT_LIM	0x3c	/* Fan 1 count limit (high) */
+#define	LM80_FAN2_COUNT_LIM	0x3d	/* Fan 2 count limit (low) */
+	/* 0x3e - 0x3f reserved	*/
+
+/*
+ * LM80 bit definitions
+ */
+
+/*	LM80_CFG		Configuration Register */
+#define LM80_CFG_START		(1<<0)	/* start monitoring operation */
+#define LM80_CFG_INT_ENA	(1<<1)	/* enables the INT# Interrupt output */
+#define LM80_CFG_INT_POL	(1<<2)	/* INT# pol: 0 act low, 1 act high */
+#define LM80_CFG_INT_CLR	(1<<3)	/* disables INT#/RST_OUT#/OS# outputs */
+#define LM80_CFG_RESET		(1<<4)	/* signals a reset */
+#define LM80_CFG_CHASS_CLR	(1<<5)	/* clears Chassis Intrusion (CI) pin */
+#define LM80_CFG_GPO		(1<<6)	/* drives the GPO# pin */
+#define LM80_CFG_INIT		(1<<7)	/* restore power on defaults */
+
+/*	LM80_ISRC_1		Interrupt Status Register 1 */
+/*	LM80_IMSK_1		Interrupt Mask Register 1 */
+#define LM80_IS_VT0			(1<<0)	/* limit exceeded for Voltage 0 */
+#define LM80_IS_VT1			(1<<1)	/* limit exceeded for Voltage 1 */
+#define LM80_IS_VT2			(1<<2)	/* limit exceeded for Voltage 2 */
+#define LM80_IS_VT3			(1<<3)	/* limit exceeded for Voltage 3 */
+#define LM80_IS_VT4			(1<<4)	/* limit exceeded for Voltage 4 */
+#define LM80_IS_VT5			(1<<5)	/* limit exceeded for Voltage 5 */
+#define LM80_IS_VT6			(1<<6)	/* limit exceeded for Voltage 6 */
+#define LM80_IS_INT_IN		(1<<7)	/* state of INT_IN# */
+
+/*	LM80_ISRC_2		Interrupt Status Register 2 */
+/*	LM80_IMSK_2		Interrupt Mask Register 2 */
+#define	LM80_IS_TEMP		(1<<0)	/* HOT temperature limit exceeded */
+#define LM80_IS_BTI			(1<<1)	/* state of BTI# pin */
+#define LM80_IS_FAN1		(1<<2)	/* count limit exceeded for Fan 1 */
+#define LM80_IS_FAN2		(1<<3)	/* count limit exceeded for Fan 2 */
+#define LM80_IS_CI			(1<<4)	/* Chassis Intrusion occured */
+#define LM80_IS_OS			(1<<5)	/* OS temperature limit exceeded */
+	/* bit 6 and 7 are reserved in LM80_ISRC_2 */
+#define LM80_IS_HT_IRQ_MD	(1<<6)	/* Hot temperature interrupt mode */
+#define LM80_IS_OT_IRQ_MD	(1<<7)	/* OS temperature interrupt mode */
+
+/*	LM80_FAN_CTRL		Fan Devisor/RST#/OS# Register */
+#define LM80_FAN1_MD_SEL	(1<<0)	/* Fan 1 mode select */
+#define LM80_FAN2_MD_SEL	(1<<1)	/* Fan 2 mode select */
+#define LM80_FAN1_PRM_CTL	(3<<2)	/* Fan 1 speed control */
+#define LM80_FAN2_PRM_CTL	(3<<4)	/* Fan 2 speed control */
+#define LM80_FAN_OS_ENA		(1<<6)	/* enable OS mode on RST_OUT#/OS# pins*/
+#define LM80_FAN_RST_ENA	(1<<7)	/* sets RST_OUT#/OS# pins in RST mode */
+
+/*	LM80_TEMP_CTRL		OS# Config, Temp Res. Reg */
+#define	LM80_TEMP_OS_STAT	(1<<0)	/* mirrors the state of RST_OUT#/OS# */
+#define LM80_TEMP_OS_POL	(1<<1)	/* select OS# polarity */
+#define LM80_TEMP_OS_MODE	(1<<2)	/* selects Interrupt mode */
+#define LM80_TEMP_RES		(1<<3)	/* selects 9 or 11 bit temp resulution*/
+#define LM80_TEMP_LSB		(0xf<<4)/* 4 LSBs of 11 bit temp data */
+#define LM80_TEMP_LSB_9		(1<<7)	/* LSB of 9 bit temperature data */
+
+	/* 0x07 - 0x1f reserved	*/
+/*	LM80_VT0_IN		current Voltage 0 value */
+/*	LM80_VT1_IN		current Voltage 1 value */
+/*	LM80_VT2_IN		current Voltage 2 value */
+/*	LM80_VT3_IN		current Voltage 3 value */
+/*	LM80_VT4_IN		current Voltage 4 value */
+/*	LM80_VT5_IN		current Voltage 5 value */
+/*	LM80_VT6_IN		current Voltage 6 value */
+/*	LM80_TEMP_IN		current temperature value */
+/*	LM80_FAN1_IN		current Fan 1 count */
+/*	LM80_FAN2_IN		current Fan 2 count */
+/*	LM80_VT0_HIGH_LIM	high limit val for Voltage 0 */
+/*	LM80_VT0_LOW_LIM	low limit val for Voltage 0 */
+/*	LM80_VT1_HIGH_LIM	high limit val for Voltage 1 */
+/*	LM80_VT1_LOW_LIM	low limit val for Voltage 1 */
+/*	LM80_VT2_HIGH_LIM	high limit val for Voltage 2 */
+/*	LM80_VT2_LOW_LIM	low limit val for Voltage 2 */
+/*	LM80_VT3_HIGH_LIM	high limit val for Voltage 3 */
+/*	LM80_VT3_LOW_LIM	low limit val for Voltage 3 */
+/*	LM80_VT4_HIGH_LIM	high limit val for Voltage 4 */
+/*	LM80_VT4_LOW_LIM	low limit val for Voltage 4 */
+/*	LM80_VT5_HIGH_LIM	high limit val for Voltage 5 */
+/*	LM80_VT5_LOW_LIM	low limit val for Voltage 5 */
+/*	LM80_VT6_HIGH_LIM	high limit val for Voltage 6 */
+/*	LM80_VT6_LOW_LIM	low limit val for Voltage 6 */
+/*	LM80_THOT_LIM_UP	hot temperature limit (high) */
+/*	LM80_THOT_LIM_LO	hot temperature limit (low) */
+/*	LM80_TOS_LIM_UP		OS temperature limit (high) */
+/*	LM80_TOS_LIM_LO		OS temperature limit (low) */
+/*	LM80_FAN1_COUNT_LIM	Fan 1 count limit (high) */
+/*	LM80_FAN2_COUNT_LIM	Fan 2 count limit (low) */
+	/* 0x3e - 0x3f reserved	*/
+
+#define LM80_ADDR		0x28	/* LM80 default addr */
+
+/* typedefs *******************************************************************/
+
+
+/* function prototypes ********************************************************/
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
+
+#endif	/* __INC_LM80_H */
diff --git a/drivers/net/sk98lin/h/skaddr.h b/drivers/net/sk98lin/h/skaddr.h
new file mode 100644
index 0000000..711f873
--- /dev/null
+++ b/drivers/net/sk98lin/h/skaddr.h
@@ -0,0 +1,425 @@
+/******************************************************************************
+ *
+ * Name:	skaddr.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.26 $
+ * Date:	$Date: 2002/11/15 07:24:42 $
+ * Purpose:	Header file for Address Management (MC, UC, Prom).
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2001 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skaddr.h,v $
+ *	Revision 1.26  2002/11/15 07:24:42  tschilli
+ *	SK_ADDR_EQUAL macro fixed.
+ *
+ *	Revision 1.25  2002/06/10 13:55:18  tschilli
+ *	Changes for handling YUKON.
+ *	All changes are internally and not visible to the programmer
+ *	using this module.
+ *
+ *	Revision 1.24  2001/01/22 13:41:34  rassmann
+ *	Supporting two nets on dual-port adapters.
+ *
+ *	Revision 1.23  2000/08/10 11:27:50  rassmann
+ *	Editorial changes.
+ *	Preserving 32-bit alignment in structs for the adapter context.
+ *
+ *	Revision 1.22  2000/08/07 11:10:40  rassmann
+ *	Editorial changes.
+ *
+ *	Revision 1.21  2000/05/04 09:39:59  rassmann
+ *	Editorial changes.
+ *	Corrected multicast address hashing.
+ *
+ *	Revision 1.20  1999/11/22 13:46:14  cgoos
+ *	Changed license header to GPL.
+ *	Allowing overwrite for SK_ADDR_EQUAL.
+ *
+ *	Revision 1.19  1999/05/28 10:56:07  rassmann
+ *	Editorial changes.
+ *
+ *	Revision 1.18  1999/04/06 17:22:04  rassmann
+ *	Added private "ActivePort".
+ *
+ *	Revision 1.17  1999/01/14 16:18:19  rassmann
+ *	Corrected multicast initialization.
+ *
+ *	Revision 1.16  1999/01/04 10:30:36  rassmann
+ *	SkAddrOverride only possible after SK_INIT_IO phase.
+ *
+ *	Revision 1.15  1998/12/29 13:13:11  rassmann
+ *	An address override is now preserved in the SK_INIT_IO phase.
+ *	All functions return an int now.
+ *	Extended parameter checking.
+ *
+ *	Revision 1.14  1998/11/24 12:39:45  rassmann
+ *	Reserved multicast entry for BPDU address.
+ *	13 multicast entries left for protocol.
+ *
+ *	Revision 1.13  1998/11/13 17:24:32  rassmann
+ *	Changed return value of SkAddrOverride to int.
+ *
+ *	Revision 1.12  1998/11/13 16:56:19  rassmann
+ *	Added macro SK_ADDR_COMPARE.
+ *	Changed return type of SkAddrOverride to SK_BOOL.
+ *
+ *	Revision 1.11  1998/10/28 18:16:35  rassmann
+ *	Avoiding I/Os before SK_INIT_RUN level.
+ *	Aligning InexactFilter.
+ *
+ *	Revision 1.10  1998/10/22 11:39:10  rassmann
+ *	Corrected signed/unsigned mismatches.
+ *
+ *	Revision 1.9  1998/10/15 15:15:49  rassmann
+ *	Changed Flags Parameters from SK_U8 to int.
+ *	Checked with lint.
+ *
+ *	Revision 1.8  1998/09/24 19:15:12  rassmann
+ *	Code cleanup.
+ *
+ *	Revision 1.7  1998/09/18 20:22:13  rassmann
+ *	Added HW access.
+ *
+ *	Revision 1.6  1998/09/04 19:40:20  rassmann
+ *	Interface enhancements.
+ *
+ *	Revision 1.5  1998/09/04 12:40:57  rassmann
+ *	Interface cleanup.
+ *
+ *	Revision 1.4  1998/09/04 12:14:13  rassmann
+ *	Interface cleanup.
+ *
+ *	Revision 1.3  1998/09/02 16:56:40  rassmann
+ *	Updated interface.
+ *
+ *	Revision 1.2  1998/08/27 14:26:09  rassmann
+ *	Updated interface.
+ *
+ *	Revision 1.1  1998/08/21 08:31:08  rassmann
+ *	First public version.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This module is intended to manage multicast addresses and promiscuous mode
+ * on GEnesis adapters.
+ *
+ * Include File Hierarchy:
+ *
+ *	"skdrv1st.h"
+ *	...
+ *	"sktypes.h"
+ *	"skqueue.h"
+ *	"skaddr.h"
+ *	...
+ *	"skdrv2nd.h"
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKADDR_H
+#define __INC_SKADDR_H
+
+#ifdef __cplusplus
+#error C++ is not yet supported.
+extern "C" {
+#endif	/* cplusplus */
+
+/* defines ********************************************************************/
+
+#define SK_MAC_ADDR_LEN				6	/* Length of MAC address. */
+#define	SK_MAX_ADDRS				14	/* #Addrs for exact match. */
+
+/* ----- Common return values ----- */
+
+#define SK_ADDR_SUCCESS				0	/* Function returned successfully. */
+#define SK_ADDR_ILLEGAL_PORT			100	/* Port number too high. */
+#define SK_ADDR_TOO_EARLY			101	/* Function called too early. */
+
+/* ----- Clear/Add flag bits ----- */
+
+#define SK_ADDR_PERMANENT			1	/* RLMT Address */
+
+/* ----- Additional Clear flag bits ----- */
+
+#define SK_MC_SW_ONLY				2	/* Do not update HW when clearing. */
+
+/* ----- Override flag bits ----- */
+
+#define SK_ADDR_LOGICAL_ADDRESS		0
+#define SK_ADDR_VIRTUAL_ADDRESS		(SK_ADDR_LOGICAL_ADDRESS)	/* old */
+#define SK_ADDR_PHYSICAL_ADDRESS	1
+#define SK_ADDR_CLEAR_LOGICAL		2
+#define SK_ADDR_SET_LOGICAL			4
+
+/* ----- Override return values ----- */
+
+#define SK_ADDR_OVERRIDE_SUCCESS	(SK_ADDR_SUCCESS)
+#define SK_ADDR_DUPLICATE_ADDRESS	1
+#define SK_ADDR_MULTICAST_ADDRESS	2
+
+/* ----- Partitioning of excact match table ----- */
+
+#define SK_ADDR_EXACT_MATCHES		16	/* #Exact match entries. */
+
+#define SK_ADDR_FIRST_MATCH_RLMT	1
+#define SK_ADDR_LAST_MATCH_RLMT		2
+#define SK_ADDR_FIRST_MATCH_DRV		3
+#define SK_ADDR_LAST_MATCH_DRV		(SK_ADDR_EXACT_MATCHES - 1)
+
+/* ----- SkAddrMcAdd/SkAddrMcUpdate return values ----- */
+
+#define SK_MC_FILTERING_EXACT		0	/* Exact filtering. */
+#define SK_MC_FILTERING_INEXACT		1	/* Inexact filtering. */
+
+/* ----- Additional SkAddrMcAdd return values ----- */
+
+#define SK_MC_ILLEGAL_ADDRESS		2	/* Illegal address. */
+#define SK_MC_ILLEGAL_PORT			3	/* Illegal port (not the active one). */
+#define SK_MC_RLMT_OVERFLOW			4	/* Too many RLMT mc addresses. */
+
+/* Promiscuous mode bits ----- */
+
+#define SK_PROM_MODE_NONE			0	/* Normal receive. */
+#define SK_PROM_MODE_LLC			1	/* Receive all LLC frames. */
+#define SK_PROM_MODE_ALL_MC			2	/* Receive all multicast frames. */
+/* #define SK_PROM_MODE_NON_LLC		4 */	/* Receive all non-LLC frames. */
+
+/* Macros */
+
+#if 0
+#ifndef SK_ADDR_EQUAL
+/*
+ * "&" instead of "&&" allows better optimization on IA-64.
+ * The replacement is safe here, as all bytes exist.
+ */
+#ifndef SK_ADDR_DWORD_COMPARE
+#define SK_ADDR_EQUAL(A1,A2)	( \
+	(((SK_U8 *)(A1))[5] == ((SK_U8 *)(A2))[5]) & \
+	(((SK_U8 *)(A1))[4] == ((SK_U8 *)(A2))[4]) & \
+	(((SK_U8 *)(A1))[3] == ((SK_U8 *)(A2))[3]) & \
+	(((SK_U8 *)(A1))[2] == ((SK_U8 *)(A2))[2]) & \
+	(((SK_U8 *)(A1))[1] == ((SK_U8 *)(A2))[1]) & \
+	(((SK_U8 *)(A1))[0] == ((SK_U8 *)(A2))[0]))
+#else	/* SK_ADDR_DWORD_COMPARE */
+#define SK_ADDR_EQUAL(A1,A2)	( \
+	(*(SK_U32 *)&(((SK_U8 *)(A1))[2]) == *(SK_U32 *)&(((SK_U8 *)(A2))[2])) & \
+	(*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0])))
+#endif	/* SK_ADDR_DWORD_COMPARE */
+#endif	/* SK_ADDR_EQUAL */
+#endif /* 0 */
+
+#ifndef SK_ADDR_EQUAL
+#ifndef SK_ADDR_DWORD_COMPARE
+#define SK_ADDR_EQUAL(A1,A2)	( \
+	(((SK_U8 *)(A1))[5] == ((SK_U8 *)(A2))[5]) & \
+	(((SK_U8 *)(A1))[4] == ((SK_U8 *)(A2))[4]) & \
+	(((SK_U8 *)(A1))[3] == ((SK_U8 *)(A2))[3]) & \
+	(((SK_U8 *)(A1))[2] == ((SK_U8 *)(A2))[2]) & \
+	(((SK_U8 *)(A1))[1] == ((SK_U8 *)(A2))[1]) & \
+	(((SK_U8 *)(A1))[0] == ((SK_U8 *)(A2))[0]))
+#else	/* SK_ADDR_DWORD_COMPARE */
+#define SK_ADDR_EQUAL(A1,A2)	( \
+	(*(SK_U16 *)&(((SK_U8 *)(A1))[4]) == *(SK_U16 *)&(((SK_U8 *)(A2))[4])) && \
+	(*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0])))
+#endif	/* SK_ADDR_DWORD_COMPARE */
+#endif	/* SK_ADDR_EQUAL */
+
+/* typedefs *******************************************************************/
+
+typedef struct s_MacAddr {
+	SK_U8	a[SK_MAC_ADDR_LEN];
+} SK_MAC_ADDR;
+
+
+/* SK_FILTER is used to ensure alignment of the filter. */
+typedef union s_InexactFilter {
+	SK_U8	Bytes[8];
+	SK_U64	Val;	/* Dummy entry for alignment only. */
+} SK_FILTER64;
+
+
+typedef struct s_AddrNet SK_ADDR_NET;
+
+
+typedef struct s_AddrPort {
+
+/* ----- Public part (read-only) ----- */
+
+	SK_MAC_ADDR	CurrentMacAddress;	/* Current physical MAC Address. */
+	SK_MAC_ADDR	PermanentMacAddress;	/* Permanent physical MAC Address. */
+	int		PromMode;		/* Promiscuous Mode. */
+
+/* ----- Private part ----- */
+
+	SK_MAC_ADDR	PreviousMacAddress;	/* Prev. phys. MAC Address. */
+	SK_BOOL		CurrentMacAddressSet;	/* CurrentMacAddress is set. */
+	SK_U8		Align01;
+
+	SK_U32		FirstExactMatchRlmt;
+	SK_U32		NextExactMatchRlmt;
+	SK_U32		FirstExactMatchDrv;
+	SK_U32		NextExactMatchDrv;
+	SK_MAC_ADDR	Exact[SK_ADDR_EXACT_MATCHES];
+	SK_FILTER64	InexactFilter;			/* For 64-bit hash register. */
+	SK_FILTER64	InexactRlmtFilter;		/* For 64-bit hash register. */
+	SK_FILTER64	InexactDrvFilter;		/* For 64-bit hash register. */
+} SK_ADDR_PORT;
+
+
+struct s_AddrNet {
+/* ----- Public part (read-only) ----- */
+
+	SK_MAC_ADDR		CurrentMacAddress;	/* Logical MAC Address. */
+	SK_MAC_ADDR		PermanentMacAddress;	/* Logical MAC Address. */
+
+/* ----- Private part ----- */
+
+	SK_U32			ActivePort;		/* View of module ADDR. */
+	SK_BOOL			CurrentMacAddressSet;	/* CurrentMacAddress is set. */
+	SK_U8			Align01;
+	SK_U16			Align02;
+};
+
+
+typedef struct s_Addr {
+
+/* ----- Public part (read-only) ----- */
+
+	SK_ADDR_NET		Net[SK_MAX_NETS];
+	SK_ADDR_PORT	Port[SK_MAX_MACS];
+
+/* ----- Private part ----- */
+} SK_ADDR;
+
+/* function prototypes ********************************************************/
+
+#ifndef SK_KR_PROTO
+
+/* Functions provided by SkAddr */
+
+/* ANSI/C++ compliant function prototypes */
+
+extern	int	SkAddrInit(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int	Level);
+
+extern	int	SkAddrMcClear(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	PortNumber,
+	int	Flags);
+
+extern	int	SkAddrXmacMcClear(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	PortNumber,
+	int	Flags);
+
+extern	int	SkAddrGmacMcClear(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	PortNumber,
+	int	Flags);
+
+extern	int	SkAddrMcAdd(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	SK_U32		PortNumber,
+	SK_MAC_ADDR	*pMc,
+	int		Flags);
+
+extern	int	SkAddrXmacMcAdd(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	SK_U32		PortNumber,
+	SK_MAC_ADDR	*pMc,
+	int		Flags);
+
+extern	int	SkAddrGmacMcAdd(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	SK_U32		PortNumber,
+	SK_MAC_ADDR	*pMc,
+	int		Flags);
+
+extern	int	SkAddrMcUpdate(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	PortNumber);
+
+extern	int	SkAddrXmacMcUpdate(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	PortNumber);
+
+extern	int	SkAddrGmacMcUpdate(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	PortNumber);
+
+extern	int	SkAddrOverride(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	SK_U32		PortNumber,
+	SK_MAC_ADDR	*pNewAddr,
+	int		Flags);
+
+extern	int	SkAddrPromiscuousChange(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	PortNumber,
+	int	NewPromMode);
+
+extern	int	SkAddrXmacPromiscuousChange(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	PortNumber,
+	int	NewPromMode);
+
+extern	int	SkAddrGmacPromiscuousChange(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	PortNumber,
+	int	NewPromMode);
+
+extern	int	SkAddrSwap(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	FromPortNumber,
+	SK_U32	ToPortNumber);
+
+#else	/* defined(SK_KR_PROTO)) */
+
+/* Non-ANSI/C++ compliant function prototypes */
+
+#error KR-style prototypes are not yet provided.
+
+#endif	/* defined(SK_KR_PROTO)) */
+
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
+
+#endif	/* __INC_SKADDR_H */
diff --git a/drivers/net/sk98lin/h/skcsum.h b/drivers/net/sk98lin/h/skcsum.h
new file mode 100644
index 0000000..2acae32
--- /dev/null
+++ b/drivers/net/sk98lin/h/skcsum.h
@@ -0,0 +1,261 @@
+/******************************************************************************
+ *
+ * Name:	skcsum.h
+ * Project:	GEnesis - SysKonnect SK-NET Gigabit Ethernet (SK-98xx)
+ * Version:	$Revision: 1.9 $
+ * Date:	$Date: 2001/02/06 11:21:39 $
+ * Purpose:	Store/verify Internet checksum in send/receive packets.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2001 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skcsum.h,v $
+ *	Revision 1.9  2001/02/06 11:21:39  rassmann
+ *	Editorial changes.
+ *
+ *	Revision 1.8  2001/02/06 11:15:36  rassmann
+ *	Supporting two nets on dual-port adapters.
+ *
+ *	Revision 1.7  2000/06/29 13:17:05  rassmann
+ *	Corrected reception of a packet with UDP checksum == 0 (which means there
+ *	is no UDP checksum).
+ *
+ *	Revision 1.6  2000/02/28 12:33:44  cgoos
+ *	Changed C++ style comments to C style.
+ *
+ *	Revision 1.5  2000/02/21 12:10:05  cgoos
+ *	Fixed license comment.
+ *
+ *	Revision 1.4  2000/02/21 11:08:37  cgoos
+ *	Merged changes back into common source.
+ *
+ *	Revision 1.1  1999/07/26 14:47:49  mkarl
+ *	changed from common source to windows specific source
+ *	added return SKCS_STATUS_IP_CSUM_ERROR_UDP and
+ *	SKCS_STATUS_IP_CSUM_ERROR_TCP to pass the NidsTester
+ *	changes for Tx csum offload
+ *
+ *	Revision 1.2  1998/09/04 12:16:34  mhaveman
+ *	Checked in for Stephan to allow compilation.
+ *	-Added definition SK_CSUM_EVENT_CLEAR_PROTO_STATS to clear statistic
+ *	-Added prototype for SkCsEvent()
+ *
+ *	Revision 1.1  1998/09/01 15:36:53  swolf
+ *	initial revision
+ *
+ *	01-Sep-1998 sw	Created.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * Public header file for the "GEnesis" common module "CSUM".
+ *
+ * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon"
+ * and is the code name of this SysKonnect project.
+ *
+ * Compilation Options:
+ *
+ *	SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an
+ *	empty module.
+ *
+ *	SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id
+ *	definitions. In this case, all SKCS_PROTO_xxx definitions must be made
+ *	external.
+ *
+ *	SKCS_OVERWRITE_STATUS - Define to overwrite the default return status
+ *	definitions. In this case, all SKCS_STATUS_xxx definitions must be made
+ *	external.
+ *
+ * Include File Hierarchy:
+ *
+ *	"h/skcsum.h"
+ *	 "h/sktypes.h"
+ *	 "h/skqueue.h"
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKCSUM_H
+#define __INC_SKCSUM_H
+
+#include "h/sktypes.h"
+#include "h/skqueue.h"
+
+/* defines ********************************************************************/
+
+/*
+ * Define the default bit flags for 'SKCS_PACKET_INFO.ProtocolFlags'  if no user
+ * overwrite.
+ */
+#ifndef SKCS_OVERWRITE_PROTO	/* User overwrite? */
+#define SKCS_PROTO_IP	0x1	/* IP (Internet Protocol version 4) */
+#define SKCS_PROTO_TCP	0x2	/* TCP (Transmission Control Protocol) */
+#define SKCS_PROTO_UDP	0x4	/* UDP (User Datagram Protocol) */
+
+/* Indices for protocol statistics. */
+#define SKCS_PROTO_STATS_IP	0
+#define SKCS_PROTO_STATS_UDP	1
+#define SKCS_PROTO_STATS_TCP	2
+#define SKCS_NUM_PROTOCOLS	3	/* Number of supported protocols. */
+#endif	/* !SKCS_OVERWRITE_PROTO */
+
+/*
+ * Define the default SKCS_STATUS type and values if no user overwrite.
+ *
+ *	SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame.
+ *	SKCS_STATUS_IP_CSUM_ERROR - IP checksum error.
+ *	SKCS_STATUS_IP_CSUM_ERROR_TCP - IP checksum error in TCP frame.
+ *	SKCS_STATUS_IP_CSUM_ERROR_UDP - IP checksum error in UDP frame
+ *	SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok).
+ *	SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame).
+ *	SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok).
+ *	SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok).
+ *	SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok.
+ *	SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok.
+ *	SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum.
+ */
+#ifndef SKCS_OVERWRITE_STATUS	/* User overwrite? */
+#define SKCS_STATUS	int	/* Define status type. */
+
+#define SKCS_STATUS_UNKNOWN_IP_VERSION	1
+#define SKCS_STATUS_IP_CSUM_ERROR		2
+#define SKCS_STATUS_IP_FRAGMENT			3
+#define SKCS_STATUS_IP_CSUM_OK			4
+#define SKCS_STATUS_TCP_CSUM_ERROR		5
+#define SKCS_STATUS_UDP_CSUM_ERROR		6
+#define SKCS_STATUS_TCP_CSUM_OK			7
+#define SKCS_STATUS_UDP_CSUM_OK			8
+/* needed for Microsoft */
+#define SKCS_STATUS_IP_CSUM_ERROR_UDP	9
+#define SKCS_STATUS_IP_CSUM_ERROR_TCP	10
+/* UDP checksum may be omitted */
+#define SKCS_STATUS_IP_CSUM_OK_NO_UDP	11
+#endif	/* !SKCS_OVERWRITE_STATUS */
+
+/* Clear protocol statistics event. */
+#define SK_CSUM_EVENT_CLEAR_PROTO_STATS	1
+
+/*
+ * Add two values in one's complement.
+ *
+ * Note: One of the two input values may be "longer" than 16-bit, but then the
+ * resulting sum may be 17 bits long. In this case, add zero to the result using
+ * SKCS_OC_ADD() again.
+ *
+ *	Result = Value1 + Value2
+ */
+#define SKCS_OC_ADD(Result, Value1, Value2) {				\
+	unsigned long Sum;						\
+									\
+	Sum = (unsigned long) (Value1) + (unsigned long) (Value2);	\
+	/* Add-in any carry. */						\
+	(Result) = (Sum & 0xffff) + (Sum >> 16);			\
+}
+
+/*
+ * Subtract two values in one's complement.
+ *
+ *	Result = Value1 - Value2
+ */
+#define SKCS_OC_SUB(Result, Value1, Value2)	\
+	SKCS_OC_ADD((Result), (Value1), ~(Value2) & 0xffff)
+
+/* typedefs *******************************************************************/
+
+/*
+ * SKCS_PROTO_STATS - The CSUM protocol statistics structure.
+ *
+ * There is one instance of this structure for each protocol supported.
+ */
+typedef struct s_CsProtocolStatistics {
+	SK_U64 RxOkCts;		/* Receive checksum ok. */
+	SK_U64 RxUnableCts;	/* Unable to verify receive checksum. */
+	SK_U64 RxErrCts;	/* Receive checksum error. */
+	SK_U64 TxOkCts;		/* Transmit checksum ok. */
+	SK_U64 TxUnableCts;	/* Unable to calculate checksum in hw. */
+} SKCS_PROTO_STATS;
+
+/*
+ * s_Csum - The CSUM module context structure.
+ */
+typedef struct s_Csum {
+	/* Enabled receive SK_PROTO_XXX bit flags. */
+	unsigned ReceiveFlags[SK_MAX_NETS];
+#ifdef TX_CSUM
+	unsigned TransmitFlags[SK_MAX_NETS];
+#endif /* TX_CSUM */
+
+	/* The protocol statistics structure; one per supported protocol. */
+	SKCS_PROTO_STATS ProtoStats[SK_MAX_NETS][SKCS_NUM_PROTOCOLS];
+} SK_CSUM;
+
+/*
+ * SKCS_PACKET_INFO - The packet information structure.
+ */
+typedef struct s_CsPacketInfo {
+	/* Bit field specifiying the desired/found protocols. */
+	unsigned ProtocolFlags;
+
+	/* Length of complete IP header, including any option fields. */
+	unsigned IpHeaderLength;
+
+	/* IP header checksum. */
+	unsigned IpHeaderChecksum;
+
+	/* TCP/UDP pseudo header checksum. */
+	unsigned PseudoHeaderChecksum;
+} SKCS_PACKET_INFO;
+
+/* function prototypes ********************************************************/
+
+#ifndef SkCsCalculateChecksum
+extern unsigned SkCsCalculateChecksum(
+	void		*pData,
+	unsigned	Length);
+#endif
+
+extern int SkCsEvent(
+	SK_AC		*pAc,
+	SK_IOC		Ioc,
+	SK_U32		Event,
+	SK_EVPARA	Param);
+
+extern SKCS_STATUS SkCsGetReceiveInfo(
+	SK_AC		*pAc,
+	void		*pIpHeader,
+	unsigned	Checksum1,
+	unsigned	Checksum2,
+	int			NetNumber);
+
+extern void SkCsGetSendInfo(
+	SK_AC				*pAc,
+	void				*pIpHeader,
+	SKCS_PACKET_INFO	*pPacketInfo,
+	int					NetNumber);
+
+extern void SkCsSetReceiveFlags(
+	SK_AC		*pAc,
+	unsigned	ReceiveFlags,
+	unsigned	*pChecksum1Offset,
+	unsigned	*pChecksum2Offset,
+	int			NetNumber);
+
+#endif	/* __INC_SKCSUM_H */
diff --git a/drivers/net/sk98lin/h/skdebug.h b/drivers/net/sk98lin/h/skdebug.h
new file mode 100644
index 0000000..cf5b5ad
--- /dev/null
+++ b/drivers/net/sk98lin/h/skdebug.h
@@ -0,0 +1,119 @@
+/******************************************************************************
+ *
+ * Name:	skdebug.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.12 $
+ * Date:	$Date: 2002/07/15 15:37:13 $
+ * Purpose:	SK specific DEBUG support
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *	$Log: skdebug.h,v $
+ *	Revision 1.12  2002/07/15 15:37:13  rschmidt
+ *	Power Management support
+ *	Editorial changes
+ *
+ *	Revision 1.11  2002/04/25 11:04:39  rschmidt
+ *	Editorial changes
+ *
+ *	Revision 1.10  1999/11/22 13:47:40  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.9  1999/09/14 14:02:43  rwahl
+ *	Added SK_DBGMOD_PECP.
+ *
+ *	Revision 1.8  1998/11/25 08:31:54  gklug
+ *	fix: no C++ comments allowed in common sources
+ *
+ *	Revision 1.7  1998/11/24 16:47:24  swolf
+ *	Driver may now define its own SK_DBG_MSG() (eg. in "h/skdrv1st.h").
+ *
+ *	Revision 1.6  1998/10/28 10:23:55  rassmann
+ *	ADDED SK_DBGMOD_ADDR.
+ *
+ *	Revision 1.5  1998/10/22 09:43:55  gklug
+ *	add: CSUM module
+ *
+ *	Revision 1.4  1998/10/01 07:54:44  gklug
+ *	add: PNMI debug module
+ *
+ *	Revision 1.3  1998/09/18 08:32:34  afischer
+ *	Macros changed according ssr-spec.:
+ *		SK_DBG_MODCHK -> SK_DBG_CHKMOD
+ *		SK_DBG_CATCHK -> SK_DBG_CHKCAT
+ *
+ *	Revision 1.2  1998/07/03 14:38:25  malthoff
+ *	Add category SK_DBGCAT_FATAL.
+ *
+ *	Revision 1.1  1998/06/19 13:39:01  malthoff
+ *	created.
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKDEBUG_H
+#define __INC_SKDEBUG_H
+
+#ifdef	DEBUG
+#ifndef SK_DBG_MSG
+#define SK_DBG_MSG(pAC,comp,cat,arg) \
+		if ( ((comp) & SK_DBG_CHKMOD(pAC)) && 	\
+		      ((cat) & SK_DBG_CHKCAT(pAC)) ) { 	\
+			SK_DBG_PRINTF arg ;		\
+		}
+#endif
+#else
+#define SK_DBG_MSG(pAC,comp,lev,arg)
+#endif
+
+/* PLS NOTE:
+ * =========
+ * Due to any restrictions of kernel printf routines do not use other
+ * format identifiers as: %x %d %c %s .
+ * Never use any combined format identifiers such as: %lx %ld in your
+ * printf - argument (arg) because some OS specific kernel printfs may
+ * only support some basic identifiers.
+ */
+
+/* Debug modules */
+
+#define SK_DBGMOD_MERR	0x00000001L	/* general module error indication */
+#define SK_DBGMOD_HWM	0x00000002L	/* Hardware init module */
+#define SK_DBGMOD_RLMT	0x00000004L	/* RLMT module */
+#define SK_DBGMOD_VPD	0x00000008L	/* VPD module */
+#define SK_DBGMOD_I2C	0x00000010L	/* I2C module */
+#define SK_DBGMOD_PNMI	0x00000020L	/* PNMI module */
+#define SK_DBGMOD_CSUM	0x00000040L	/* CSUM module */
+#define SK_DBGMOD_ADDR	0x00000080L	/* ADDR module */
+#define SK_DBGMOD_PECP	0x00000100L	/* PECP module */
+#define SK_DBGMOD_POWM	0x00000200L	/* Power Management module */
+
+/* Debug events */
+
+#define SK_DBGCAT_INIT	0x00000001L	/* module/driver initialization */
+#define SK_DBGCAT_CTRL	0x00000002L	/* controlling devices */
+#define SK_DBGCAT_ERR	0x00000004L	/* error handling paths */
+#define SK_DBGCAT_TX	0x00000008L	/* transmit path */
+#define SK_DBGCAT_RX	0x00000010L	/* receive path */
+#define SK_DBGCAT_IRQ	0x00000020L	/* general IRQ handling */
+#define SK_DBGCAT_QUEUE	0x00000040L	/* any queue management */
+#define SK_DBGCAT_DUMP	0x00000080L	/* large data output e.g. hex dump */
+#define SK_DBGCAT_FATAL	0x00000100L	/* fatal error */
+
+#endif	/* __INC_SKDEBUG_H */
diff --git a/drivers/net/sk98lin/h/skdrv1st.h b/drivers/net/sk98lin/h/skdrv1st.h
new file mode 100644
index 0000000..af34d7b
--- /dev/null
+++ b/drivers/net/sk98lin/h/skdrv1st.h
@@ -0,0 +1,264 @@
+/******************************************************************************
+ *
+ * Name:	skdrv1st.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.11 $
+ * Date:	$Date: 2003/02/25 14:16:40 $
+ * Purpose:	First header file for driver and all other modules
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skdrv1st.h,v $
+ *	Revision 1.11  2003/02/25 14:16:40  mlindner
+ *	Fix: Copyright statement
+ *
+ *	Revision 1.10  2002/10/02 12:46:02  mlindner
+ *	Add: Support for Yukon
+ *
+ *	Revision 1.9.2.2  2001/12/07 12:06:42  mlindner
+ *	Fix: malloc -> slab changes
+ *
+ *	Revision 1.9.2.1  2001/03/12 16:50:59  mlindner
+ *	chg: kernel 2.4 adaption
+ *
+ *	Revision 1.9  2001/01/22 14:16:04  mlindner
+ *	added ProcFs functionality
+ *	Dual Net functionality integrated
+ *	Rlmt networks added
+ *
+ *	Revision 1.8  2000/02/21 12:19:18  cgoos
+ *	Added default for SK_DEBUG_CHKMOD/_CHKCAT
+ *
+ *	Revision 1.7  1999/11/22 13:50:00  cgoos
+ *	Changed license header to GPL.
+ *	Added overwrite for several functions.
+ *	Removed linux 2.0.x definitions.
+ *	Removed PCI vendor ID definition (now in kernel).
+ *
+ *	Revision 1.6  1999/07/27 08:03:33  cgoos
+ *	Changed SK_IN/OUT macros to readX/writeX instead of memory
+ *	accesses (necessary for ALPHA).
+ *
+ *	Revision 1.5  1999/07/23 12:10:21  cgoos
+ *	Removed SK_RLMT_SLOW_LOOKAHEAD define.
+ *
+ *	Revision 1.4  1999/07/14 12:31:13  cgoos
+ *	Added SK_RLMT_SLOW_LOOKAHEAD define.
+ *
+ *	Revision 1.3  1999/04/07 10:12:54  cgoos
+ *	Added check for KERNEL and OPTIMIZATION defines.
+ *
+ *	Revision 1.2  1999/03/01 08:51:47  cgoos
+ *	Fixed pcibios_read/write definitions.
+ *
+ *	Revision 1.1  1999/02/16 07:40:49  cgoos
+ *	First version.
+ *
+ *
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This is the first include file of the driver, which includes all
+ * neccessary system header files and some of the GEnesis header files.
+ * It also defines some basic items.
+ *
+ * Include File Hierarchy:
+ *
+ *	see skge.c
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKDRV1ST_H
+#define __INC_SKDRV1ST_H
+
+#if 0
+/* Check kernel version */
+#include <linux/version.h>
+#if (LINUX_VERSION_CODE > 0x020300)
+#endif
+#endif
+
+typedef struct s_AC	SK_AC;
+
+/* override some default functions with optimized linux functions */
+
+#define SK_PNMI_STORE_U16(p,v)		memcpy((char*)(p),(char*)&(v),2)
+#define SK_PNMI_STORE_U32(p,v)		memcpy((char*)(p),(char*)&(v),4)
+#define SK_PNMI_STORE_U64(p,v)		memcpy((char*)(p),(char*)&(v),8)
+#define SK_PNMI_READ_U16(p,v)		memcpy((char*)&(v),(char*)(p),2)
+#define SK_PNMI_READ_U32(p,v)		memcpy((char*)&(v),(char*)(p),2)
+#define SK_PNMI_READ_U64(p,v)		memcpy((char*)&(v),(char*)(p),2)
+
+#define SkCsCalculateChecksum(p,l)	((~ip_compute_csum(p, l)) & 0xffff)
+
+#define SK_ADDR_EQUAL(a1,a2)		(!memcmp(a1,a2,6))
+
+
+#if !defined(__OPTIMIZE__)  ||  !defined(__KERNEL__)
+#warning  You must compile this file with the correct options!
+#warning  See the last lines of the source file.
+#error You must compile this driver with "-O".
+#endif
+
+#if 0
+#include <linux/version.h>
+#endif
+#include <linux/types.h>
+#if 0
+#include <linux/kernel.h>
+#endif
+#include <linux/string.h>
+#if 0
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#endif
+#include <asm/byteorder.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+#if 0
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <net/checksum.h>
+#endif
+
+#include	"h/sktypes.h"
+#include	"h/skerror.h"
+#include	"h/skdebug.h"
+#include	"h/lm80.h"
+#include	"h/xmac_ii.h"
+
+#include "u-boot_compat.h"
+
+#ifdef __LITTLE_ENDIAN
+#define SK_LITTLE_ENDIAN
+#else
+#define SK_BIG_ENDIAN
+#endif
+
+#if 0
+#define SK_NET_DEVICE	net_device
+#else
+#define SK_NET_DEVICE	eth_device
+#endif
+
+
+/* we use gethrtime(), return unit: nanoseconds */
+#if 0
+#define SK_TICKS_PER_SEC	HZ
+#else
+#define SK_TICKS_PER_SEC	CFG_HZ
+#endif
+
+#define	SK_MEM_MAPPED_IO
+
+/* #define SK_RLMT_SLOW_LOOKAHEAD */
+
+#define SK_MAX_MACS		2
+#define SK_MAX_NETS		2
+
+#define SK_IOC			char*
+
+typedef struct s_DrvRlmtMbuf SK_MBUF;
+
+#define	SK_CONST64	INT64_C
+#define	SK_CONSTU64	UINT64_C
+
+#define SK_MEMCPY(dest,src,size)	memcpy(dest,src,size)
+#define SK_MEMCMP(s1,s2,size)		memcmp(s1,s2,size)
+#define SK_MEMSET(dest,val,size)	memset(dest,val,size)
+#define SK_STRLEN(pStr)			strlen((char*)(pStr))
+#define SK_STRNCPY(pDest,pSrc,size)	strncpy((char*)(pDest),(char*)(pSrc),size)
+#define SK_STRCMP(pStr1,pStr2)		strcmp((char*)(pStr1),(char*)(pStr2))
+
+/* macros to access the adapter */
+#define SK_OUT8(b,a,v)		writeb((v), ((b)+(a)))
+#define SK_OUT16(b,a,v)		writew((v), ((b)+(a)))
+#define SK_OUT32(b,a,v)		writel((v), ((b)+(a)))
+#define SK_IN8(b,a,pv)		(*(pv) = readb((b)+(a)))
+#define SK_IN16(b,a,pv)		(*(pv) = readw((b)+(a)))
+#define SK_IN32(b,a,pv)		(*(pv) = readl((b)+(a)))
+
+#define int8_t		char
+#define int16_t		short
+#define int32_t		long
+#define int64_t		long long
+#define uint8_t		u_char
+#define uint16_t	u_short
+#define uint32_t	u_long
+#define uint64_t	unsigned long long
+#define t_scalar_t	int
+#define t_uscalar_t	unsigned int
+#define uintptr_t	unsigned long
+
+#define __CONCAT__(A,B) A##B
+
+#define INT32_C(a)		__CONCAT__(a,L)
+#define INT64_C(a)		__CONCAT__(a,LL)
+#define UINT32_C(a)		__CONCAT__(a,UL)
+#define UINT64_C(a)		__CONCAT__(a,ULL)
+
+#ifdef DEBUG
+#define SK_DBG_PRINTF		printk
+#ifndef SK_DEBUG_CHKMOD
+#define SK_DEBUG_CHKMOD		0
+#endif
+#ifndef SK_DEBUG_CHKCAT
+#define SK_DEBUG_CHKCAT		0
+#endif
+/* those come from the makefile */
+#define SK_DBG_CHKMOD(pAC)	(SK_DEBUG_CHKMOD)
+#define SK_DBG_CHKCAT(pAC)	(SK_DEBUG_CHKCAT)
+
+extern void SkDbgPrintf(const char *format,...);
+
+#define SK_DBGMOD_DRV			0x00010000
+
+/**** possible driver debug categories ********************************/
+#define SK_DBGCAT_DRV_ENTRY		0x00010000
+#define SK_DBGCAT_DRV_SAP		0x00020000
+#define SK_DBGCAT_DRV_MCA		0x00040000
+#define SK_DBGCAT_DRV_TX_PROGRESS	0x00080000
+#define SK_DBGCAT_DRV_RX_PROGRESS	0x00100000
+#define SK_DBGCAT_DRV_PROGRESS		0x00200000
+#define SK_DBGCAT_DRV_MSG		0x00400000
+#define SK_DBGCAT_DRV_PROM		0x00800000
+#define SK_DBGCAT_DRV_TX_FRAME		0x01000000
+#define SK_DBGCAT_DRV_ERROR		0x02000000
+#define SK_DBGCAT_DRV_INT_SRC		0x04000000
+#define SK_DBGCAT_DRV_EVENT		0x08000000
+
+#endif
+
+#define SK_ERR_LOG		SkErrorLog
+
+extern void SkErrorLog(SK_AC*, int, int, char*);
+
+#endif
diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h
new file mode 100644
index 0000000..a311827
--- /dev/null
+++ b/drivers/net/sk98lin/h/skdrv2nd.h
@@ -0,0 +1,561 @@
+/******************************************************************************
+ *
+ * Name:	skdrv2nd.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.15 $
+ * Date:	$Date: 2003/02/25 14:16:40 $
+ * Purpose:	Second header file for driver and all other modules
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skdrv2nd.h,v $
+ *	Revision 1.15  2003/02/25 14:16:40  mlindner
+ *	Fix: Copyright statement
+ *
+ *	Revision 1.14  2003/02/25 13:26:26  mlindner
+ *	Add: Support for various vendors
+ *
+ *	Revision 1.13  2002/10/02 12:46:02  mlindner
+ *	Add: Support for Yukon
+ *
+ *	Revision 1.12.2.2  2001/09/05 12:14:50  mlindner
+ *	add: New hardware revision int
+ *
+ *	Revision 1.12.2.1  2001/03/12 16:50:59  mlindner
+ *	chg: kernel 2.4 adaption
+ *
+ *	Revision 1.12  2001/03/01 12:52:15  mlindner
+ *	Fixed ring size
+ *
+ *	Revision 1.11  2001/02/19 13:28:02  mlindner
+ *	Changed PNMI parameter values
+ *
+ *	Revision 1.10  2001/01/22 14:16:04  mlindner
+ *	added ProcFs functionality
+ *	Dual Net functionality integrated
+ *	Rlmt networks added
+ *
+ *	Revision 1.1  2000/10/05 19:46:50  phargrov
+ *	Add directory src/vipk_devs_nonlbl/vipk_sk98lin/
+ *	This is the SysKonnect SK-98xx Gigabit Ethernet driver,
+ *	contributed by SysKonnect.
+ *
+ *	Revision 1.9  2000/02/21 10:39:55  cgoos
+ *	Added flag for jumbo support usage.
+ *
+ *	Revision 1.8  1999/11/22 13:50:44  cgoos
+ *	Changed license header to GPL.
+ *	Fixed two comments.
+ *
+ *	Revision 1.7  1999/09/28 12:38:21  cgoos
+ *	Added CheckQueue to SK_AC.
+ *
+ *	Revision 1.6  1999/07/27 08:04:05  cgoos
+ *	Added checksumming variables to SK_AC.
+ *
+ *	Revision 1.5  1999/03/29 12:33:26  cgoos
+ *	Rreversed to fine lock granularity.
+ *
+ *	Revision 1.4  1999/03/15 12:14:02  cgoos
+ *	Added DriverLock to SK_AC.
+ *	Removed other locks.
+ *
+ *	Revision 1.3  1999/03/01 08:52:27  cgoos
+ *	Changed pAC->PciDev declaration.
+ *
+ *	Revision 1.2  1999/02/18 10:57:14  cgoos
+ *	Removed SkDrvTimeStamp prototype.
+ *	Fixed SkGeOsGetTime prototype.
+ *
+ *	Revision 1.1  1999/02/16 07:41:01  cgoos
+ *	First version.
+ *
+ *
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This is the second include file of the driver, which includes all other
+ * neccessary files and defines all structures and constants used by the
+ * driver and the common modules.
+ *
+ * Include File Hierarchy:
+ *
+ *	see skge.c
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKDRV2ND_H
+#define __INC_SKDRV2ND_H
+
+#include "h/skqueue.h"
+#include "h/skgehwt.h"
+#include "h/sktimer.h"
+#include "h/ski2c.h"
+#include "h/skgepnmi.h"
+#include "h/skvpd.h"
+#include "h/skgehw.h"
+#include "h/skgeinit.h"
+#include "h/skaddr.h"
+#include "h/skgesirq.h"
+#include "h/skcsum.h"
+#include "h/skrlmt.h"
+#include "h/skgedrv.h"
+
+#define SK_PCI_ISCOMPLIANT(result, pdev) {     \
+    result = SK_FALSE; /* default */     \
+    /* 3Com (0x10b7) */     \
+    if (pdev->vendor == 0x10b7) {     \
+	/* Gigabit Ethernet Adapter (0x1700) */     \
+	if ((pdev->device == 0x1700)) { \
+	    result = SK_TRUE;     \
+	}     \
+    /* SysKonnect (0x1148) */     \
+    } else if (pdev->vendor == 0x1148) {     \
+	/* SK-98xx Gigabit Ethernet Server Adapter (0x4300) */     \
+	/* SK-98xx V2 Gigabit Ethernet Adapter (0x4320) */     \
+	if ((pdev->device == 0x4300) || \
+	    (pdev->device == 0x4320)) { \
+	    result = SK_TRUE;     \
+	}     \
+    /* D-Link (0x1186) */     \
+    } else if (pdev->vendor == 0x1186) {     \
+	/* Gigabit Ethernet Adapter (0x4c00) */     \
+	if ((pdev->device == 0x4c00)) { \
+	    result = SK_TRUE;     \
+	}     \
+    /* CNet (0x1371) */     \
+    } else if (pdev->vendor == 0x1371) {     \
+	/* GigaCard Network Adapter (0x434e) */     \
+	if ((pdev->device == 0x434e)) { \
+	    result = SK_TRUE;     \
+	}     \
+    /* Linksys (0x1737) */     \
+    } else if (pdev->vendor == 0x1737) {     \
+	/* Gigabit Network Adapter (0x1032) */     \
+	/* Gigabit Network Adapter (0x1064) */     \
+	if ((pdev->device == 0x1032) || \
+	    (pdev->device == 0x1064)) { \
+	    result = SK_TRUE;     \
+	}     \
+    } else {     \
+	result = SK_FALSE;     \
+    }     \
+}
+
+
+extern SK_MBUF		*SkDrvAllocRlmtMbuf(SK_AC*, SK_IOC, unsigned);
+extern void		SkDrvFreeRlmtMbuf(SK_AC*, SK_IOC, SK_MBUF*);
+extern SK_U64		SkOsGetTime(SK_AC*);
+extern int		SkPciReadCfgDWord(SK_AC*, int, SK_U32*);
+extern int		SkPciReadCfgWord(SK_AC*, int, SK_U16*);
+extern int		SkPciReadCfgByte(SK_AC*, int, SK_U8*);
+extern int		SkPciWriteCfgDWord(SK_AC*, int, SK_U32);
+extern int		SkPciWriteCfgWord(SK_AC*, int, SK_U16);
+extern int		SkPciWriteCfgByte(SK_AC*, int, SK_U8);
+extern int		SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA);
+
+struct s_DrvRlmtMbuf {
+	SK_MBUF		*pNext;		/* Pointer to next RLMT Mbuf. */
+	SK_U8		*pData;		/* Data buffer (virtually contig.). */
+	unsigned	Size;		/* Data buffer size. */
+	unsigned	Length;		/* Length of packet (<= Size). */
+	SK_U32		PortIdx;	/* Receiving/transmitting port. */
+#ifdef SK_RLMT_MBUF_PRIVATE
+	SK_RLMT_MBUF	Rlmt;		/* Private part for RLMT. */
+#endif  /* SK_RLMT_MBUF_PRIVATE */
+	struct sk_buff	*pOs;		/* Pointer to message block */
+};
+
+
+/*
+ * ioctl definitions
+ */
+#define		SK_IOCTL_BASE		(SIOCDEVPRIVATE)
+#define		SK_IOCTL_GETMIB		(SK_IOCTL_BASE + 0)
+#define		SK_IOCTL_SETMIB		(SK_IOCTL_BASE + 1)
+#define		SK_IOCTL_PRESETMIB	(SK_IOCTL_BASE + 2)
+
+typedef struct s_IOCTL	SK_GE_IOCTL;
+
+struct s_IOCTL {
+	char*		pData;
+	unsigned int	Len;
+};
+
+
+/*
+ * define sizes of descriptor rings in bytes
+ */
+
+#if 0
+#define		TX_RING_SIZE	(8*1024)
+#define		RX_RING_SIZE	(24*1024)
+#else
+#define		TX_RING_SIZE	(10 * 40)
+#define		RX_RING_SIZE	(10 * 40)
+#endif
+
+/*
+ * Buffer size for ethernet packets
+ */
+#define	ETH_BUF_SIZE	1540
+#define	ETH_MAX_MTU	1514
+#define ETH_MIN_MTU	60
+#define ETH_MULTICAST_BIT	0x01
+#define SK_JUMBO_MTU	9000
+
+/*
+ * transmit priority selects the queue: LOW=asynchron, HIGH=synchron
+ */
+#define TX_PRIO_LOW	0
+#define TX_PRIO_HIGH	1
+
+/*
+ * alignment of rx/tx descriptors
+ */
+#define DESCR_ALIGN	8
+
+/*
+ * definitions for pnmi. TODO
+ */
+#define SK_DRIVER_RESET(pAC, IoC)	0
+#define SK_DRIVER_SENDEVENT(pAC, IoC)	0
+#define SK_DRIVER_SELFTEST(pAC, IoC)	0
+/* For get mtu you must add an own function */
+#define SK_DRIVER_GET_MTU(pAc,IoC,i)	0
+#define SK_DRIVER_SET_MTU(pAc,IoC,i,v)	0
+#define SK_DRIVER_PRESET_MTU(pAc,IoC,i,v)	0
+
+
+/* TX and RX descriptors *****************************************************/
+
+typedef struct s_RxD RXD; /* the receive descriptor */
+
+struct s_RxD {
+	volatile SK_U32	RBControl;	/* Receive Buffer Control */
+	SK_U32		VNextRxd;	/* Next receive descriptor,low dword */
+	SK_U32		VDataLow;	/* Receive buffer Addr, low dword */
+	SK_U32		VDataHigh;	/* Receive buffer Addr, high dword */
+	SK_U32		FrameStat;	/* Receive Frame Status word */
+	SK_U32		TimeStamp;	/* Time stamp from XMAC */
+	SK_U32		TcpSums;	/* TCP Sum 2 / TCP Sum 1 */
+	SK_U32		TcpSumStarts;	/* TCP Sum Start 2 / TCP Sum Start 1 */
+	RXD		*pNextRxd;	/* Pointer to next Rxd */
+	struct sk_buff	*pMBuf;		/* Pointer to Linux' socket buffer */
+};
+
+typedef struct s_TxD TXD; /* the transmit descriptor */
+
+struct s_TxD {
+	volatile SK_U32	TBControl;	/* Transmit Buffer Control */
+	SK_U32		VNextTxd;	/* Next transmit descriptor,low dword */
+	SK_U32		VDataLow;	/* Transmit Buffer Addr, low dword */
+	SK_U32		VDataHigh;	/* Transmit Buffer Addr, high dword */
+	SK_U32		FrameStat;	/* Transmit Frame Status Word */
+	SK_U32		TcpSumOfs;	/* Reserved / TCP Sum Offset */
+	SK_U16		TcpSumSt;	/* TCP Sum Start */
+	SK_U16		TcpSumWr;	/* TCP Sum Write */
+	SK_U32		TcpReserved;	/* not used */
+	TXD		*pNextTxd;	/* Pointer to next Txd */
+	struct sk_buff	*pMBuf;		/* Pointer to Linux' socket buffer */
+};
+
+
+/* definition of flags in descriptor control field */
+#define	RX_CTRL_OWN_BMU 	UINT32_C(0x80000000)
+#define	RX_CTRL_STF		UINT32_C(0x40000000)
+#define	RX_CTRL_EOF		UINT32_C(0x20000000)
+#define	RX_CTRL_EOB_IRQ		UINT32_C(0x10000000)
+#define	RX_CTRL_EOF_IRQ		UINT32_C(0x08000000)
+#define RX_CTRL_DEV_NULL	UINT32_C(0x04000000)
+#define RX_CTRL_STAT_VALID	UINT32_C(0x02000000)
+#define RX_CTRL_TIME_VALID	UINT32_C(0x01000000)
+#define RX_CTRL_CHECK_DEFAULT	UINT32_C(0x00550000)
+#define RX_CTRL_CHECK_CSUM	UINT32_C(0x00560000)
+#define	RX_CTRL_LEN_MASK	UINT32_C(0x0000FFFF)
+
+#define	TX_CTRL_OWN_BMU 	UINT32_C(0x80000000)
+#define	TX_CTRL_STF		UINT32_C(0x40000000)
+#define	TX_CTRL_EOF		UINT32_C(0x20000000)
+#define	TX_CTRL_EOB_IRQ		UINT32_C(0x10000000)
+#define	TX_CTRL_EOF_IRQ		UINT32_C(0x08000000)
+#define TX_CTRL_ST_FWD		UINT32_C(0x04000000)
+#define TX_CTRL_DISAB_CRC	UINT32_C(0x02000000)
+#define TX_CTRL_SOFTWARE	UINT32_C(0x01000000)
+#define TX_CTRL_CHECK_DEFAULT	UINT32_C(0x00550000)
+#define TX_CTRL_CHECK_CSUM	UINT32_C(0x00560000)
+#define	TX_CTRL_LEN_MASK	UINT32_C(0x0000FFFF)
+
+
+/* The offsets of registers in the TX and RX queue control io area ***********/
+
+#define RX_Q_BUF_CTRL_CNT	0x00
+#define RX_Q_NEXT_DESCR_LOW	0x04
+#define RX_Q_BUF_ADDR_LOW	0x08
+#define RX_Q_BUF_ADDR_HIGH	0x0c
+#define RX_Q_FRAME_STAT		0x10
+#define RX_Q_TIME_STAMP		0x14
+#define RX_Q_CSUM_1_2		0x18
+#define RX_Q_CSUM_START_1_2	0x1c
+#define RX_Q_CUR_DESCR_LOW	0x20
+#define RX_Q_DESCR_HIGH		0x24
+#define RX_Q_CUR_ADDR_LOW	0x28
+#define RX_Q_CUR_ADDR_HIGH	0x2c
+#define RX_Q_CUR_BYTE_CNT	0x30
+#define RX_Q_CTRL		0x34
+#define RX_Q_FLAG		0x38
+#define RX_Q_TEST1		0x3c
+#define RX_Q_TEST2		0x40
+#define RX_Q_TEST3		0x44
+
+#define TX_Q_BUF_CTRL_CNT	0x00
+#define TX_Q_NEXT_DESCR_LOW	0x04
+#define TX_Q_BUF_ADDR_LOW	0x08
+#define TX_Q_BUF_ADDR_HIGH	0x0c
+#define TX_Q_FRAME_STAT		0x10
+#define TX_Q_CSUM_START		0x14
+#define TX_Q_CSUM_START_POS	0x18
+#define TX_Q_RESERVED		0x1c
+#define TX_Q_CUR_DESCR_LOW	0x20
+#define TX_Q_DESCR_HIGH		0x24
+#define TX_Q_CUR_ADDR_LOW	0x28
+#define TX_Q_CUR_ADDR_HIGH	0x2c
+#define TX_Q_CUR_BYTE_CNT	0x30
+#define TX_Q_CTRL		0x34
+#define TX_Q_FLAG		0x38
+#define TX_Q_TEST1		0x3c
+#define TX_Q_TEST2		0x40
+#define TX_Q_TEST3		0x44
+
+/* definition of flags in the queue control field */
+#define RX_Q_CTRL_POLL_ON	0x00000080
+#define RX_Q_CTRL_POLL_OFF	0x00000040
+#define RX_Q_CTRL_STOP		0x00000020
+#define RX_Q_CTRL_START		0x00000010
+#define RX_Q_CTRL_CLR_I_PAR	0x00000008
+#define RX_Q_CTRL_CLR_I_EOB	0x00000004
+#define RX_Q_CTRL_CLR_I_EOF	0x00000002
+#define RX_Q_CTRL_CLR_I_ERR	0x00000001
+
+#define TX_Q_CTRL_POLL_ON	0x00000080
+#define TX_Q_CTRL_POLL_OFF	0x00000040
+#define TX_Q_CTRL_STOP		0x00000020
+#define TX_Q_CTRL_START		0x00000010
+#define TX_Q_CTRL_CLR_I_EOB	0x00000004
+#define TX_Q_CTRL_CLR_I_EOF	0x00000002
+#define TX_Q_CTRL_CLR_I_ERR	0x00000001
+
+
+/* Interrupt bits in the interrupts source register **************************/
+#define IRQ_HW_ERROR		0x80000000
+#define IRQ_RESERVED		0x40000000
+#define IRQ_PKT_TOUT_RX1	0x20000000
+#define IRQ_PKT_TOUT_RX2	0x10000000
+#define IRQ_PKT_TOUT_TX1	0x08000000
+#define IRQ_PKT_TOUT_TX2	0x04000000
+#define IRQ_I2C_READY		0x02000000
+#define IRQ_SW			0x01000000
+#define IRQ_EXTERNAL_REG	0x00800000
+#define IRQ_TIMER		0x00400000
+#define IRQ_MAC1		0x00200000
+#define IRQ_LINK_SYNC_C_M1	0x00100000
+#define IRQ_MAC2		0x00080000
+#define IRQ_LINK_SYNC_C_M2	0x00040000
+#define IRQ_EOB_RX1		0x00020000
+#define IRQ_EOF_RX1		0x00010000
+#define IRQ_CHK_RX1		0x00008000
+#define IRQ_EOB_RX2		0x00004000
+#define IRQ_EOF_RX2		0x00002000
+#define IRQ_CHK_RX2		0x00001000
+#define IRQ_EOB_SY_TX1		0x00000800
+#define IRQ_EOF_SY_TX1		0x00000400
+#define IRQ_CHK_SY_TX1		0x00000200
+#define IRQ_EOB_AS_TX1		0x00000100
+#define IRQ_EOF_AS_TX1		0x00000080
+#define IRQ_CHK_AS_TX1		0x00000040
+#define IRQ_EOB_SY_TX2		0x00000020
+#define IRQ_EOF_SY_TX2		0x00000010
+#define IRQ_CHK_SY_TX2		0x00000008
+#define IRQ_EOB_AS_TX2		0x00000004
+#define IRQ_EOF_AS_TX2		0x00000002
+#define IRQ_CHK_AS_TX2		0x00000001
+
+#define DRIVER_IRQS	(IRQ_SW | IRQ_EOF_RX1 | IRQ_EOF_RX2 | \
+			IRQ_EOF_SY_TX1 | IRQ_EOF_AS_TX1 | \
+			IRQ_EOF_SY_TX2 | IRQ_EOF_AS_TX2)
+
+#define SPECIAL_IRQS	(IRQ_HW_ERROR | IRQ_PKT_TOUT_RX1 | IRQ_PKT_TOUT_RX2 | \
+			IRQ_PKT_TOUT_TX1 | IRQ_PKT_TOUT_TX2 | \
+			IRQ_I2C_READY | IRQ_EXTERNAL_REG | IRQ_TIMER | \
+			IRQ_MAC1 | IRQ_LINK_SYNC_C_M1 | \
+			IRQ_MAC2 | IRQ_LINK_SYNC_C_M2 | \
+			IRQ_CHK_RX1 | IRQ_CHK_RX2 | \
+			IRQ_CHK_SY_TX1 | IRQ_CHK_AS_TX1 | \
+			IRQ_CHK_SY_TX2 | IRQ_CHK_AS_TX2)
+
+#define IRQ_MASK	(IRQ_SW | IRQ_EOB_RX1 | IRQ_EOF_RX1 | \
+			IRQ_EOB_RX2 | IRQ_EOF_RX2 | \
+			IRQ_EOB_SY_TX1 | IRQ_EOF_SY_TX1 | \
+			IRQ_EOB_AS_TX1 | IRQ_EOF_AS_TX1 | \
+			IRQ_EOB_SY_TX2 | IRQ_EOF_SY_TX2 | \
+			IRQ_EOB_AS_TX2 | IRQ_EOF_AS_TX2 | \
+			IRQ_HW_ERROR | IRQ_PKT_TOUT_RX1 | IRQ_PKT_TOUT_RX2 | \
+			IRQ_PKT_TOUT_TX1 | IRQ_PKT_TOUT_TX2 | \
+			IRQ_I2C_READY | IRQ_EXTERNAL_REG | IRQ_TIMER | \
+			IRQ_MAC1 | \
+			IRQ_MAC2 | \
+			IRQ_CHK_RX1 | IRQ_CHK_RX2 | \
+			IRQ_CHK_SY_TX1 | IRQ_CHK_AS_TX1 | \
+			IRQ_CHK_SY_TX2 | IRQ_CHK_AS_TX2)
+
+#define IRQ_HWE_MASK	0x00000FFF /* enable all HW irqs */
+
+typedef struct s_DevNet DEV_NET;
+
+struct s_DevNet {
+	int             PortNr;
+	int             NetNr;
+	int             Mtu;
+	int             Up;
+	SK_AC   *pAC;
+};
+
+typedef struct s_TxPort		TX_PORT;
+
+struct s_TxPort {
+	/* the transmit descriptor rings */
+	caddr_t		pTxDescrRing;	/* descriptor area memory */
+	SK_U64		VTxDescrRing;	/* descr. area bus virt. addr. */
+	TXD		*pTxdRingHead;	/* Head of Tx rings */
+	TXD		*pTxdRingTail;	/* Tail of Tx rings */
+	TXD		*pTxdRingPrev;	/* descriptor sent previously */
+	int		TxdRingFree;	/* # of free entrys */
+#if 0
+	spinlock_t	TxDesRingLock;	/* serialize descriptor accesses */
+#endif
+	caddr_t		HwAddr;		/* bmu registers address */
+	int		PortIndex;	/* index number of port (0 or 1) */
+};
+
+typedef struct s_RxPort		RX_PORT;
+
+struct s_RxPort {
+	/* the receive descriptor rings */
+	caddr_t		pRxDescrRing;	/* descriptor area memory */
+	SK_U64		VRxDescrRing;   /* descr. area bus virt. addr. */
+	RXD		*pRxdRingHead;	/* Head of Rx rings */
+	RXD		*pRxdRingTail;	/* Tail of Rx rings */
+	RXD		*pRxdRingPrev;	/* descriptor given to BMU previously */
+	int		RxdRingFree;	/* # of free entrys */
+#if 0
+	spinlock_t	RxDesRingLock;	/* serialize descriptor accesses */
+#endif
+	int		RxFillLimit;	/* limit for buffers in ring */
+	caddr_t		HwAddr;		/* bmu registers address */
+	int		PortIndex;	/* index number of port (0 or 1) */
+};
+
+typedef struct s_PerStrm	PER_STRM;
+
+#define SK_ALLOC_IRQ	0x00000001
+
+/****************************************************************************
+ * Per board structure / Adapter Context structure:
+ *	Allocated within attach(9e) and freed within detach(9e).
+ *	Contains all 'per device' necessary handles, flags, locks etc.:
+ */
+struct s_AC  {
+	SK_GEINIT	GIni;		/* GE init struct */
+	SK_PNMI		Pnmi;		/* PNMI data struct */
+	SK_VPD		vpd;		/* vpd data struct */
+	SK_QUEUE	Event;		/* Event queue */
+	SK_HWT		Hwt;		/* Hardware Timer control struct */
+	SK_TIMCTRL	Tim;		/* Software Timer control struct */
+	SK_I2C		I2c;		/* I2C relevant data structure */
+	SK_ADDR		Addr;		/* for Address module */
+	SK_CSUM		Csum;		/* for checksum module */
+	SK_RLMT		Rlmt;		/* for rlmt module */
+#if 0
+	spinlock_t	SlowPathLock;	/* Normal IRQ lock */
+#endif
+	SK_PNMI_STRUCT_DATA PnmiStruct;	/* structure to get all Pnmi-Data */
+	int			RlmtMode;	/* link check mode to set */
+	int			RlmtNets;	/* Number of nets */
+
+	SK_IOC		IoBase;		/* register set of adapter */
+	int		BoardLevel;	/* level of active hw init (0-2) */
+	char		DeviceStr[80];	/* adapter string from vpd */
+	SK_U32		AllocFlag;	/* flag allocation of resources */
+#if 0
+	struct pci_dev	*PciDev;	/* for access to pci config space */
+	SK_U32		PciDevId;	/* pci device id */
+#else
+	int		PciDev;
+#endif
+	struct SK_NET_DEVICE	*dev[2];	/* pointer to device struct */
+	char		Name[30];	/* driver name */
+	struct SK_NET_DEVICE	*Next;		/* link all devices (for clearing) */
+	int		RxBufSize;	/* length of receive buffers */
+#if 0
+	struct net_device_stats stats;	/* linux 'netstat -i' statistics */
+#endif
+	int		Index;		/* internal board index number */
+
+	/* adapter RAM sizes for queues of active port */
+	int		RxQueueSize;	/* memory used for receive queue */
+	int		TxSQueueSize;	/* memory used for sync. tx queue */
+	int		TxAQueueSize;	/* memory used for async. tx queue */
+
+	int		PromiscCount;	/* promiscuous mode counter  */
+	int		AllMultiCount;  /* allmulticast mode counter */
+	int		MulticCount;	/* number of different MC    */
+					/*  addresses for this board */
+					/*  (may be more than HW can)*/
+
+	int		HWRevision;	/* Hardware revision */
+	int		ActivePort;	/* the active XMAC port */
+	int		MaxPorts;		/* number of activated ports */
+	int		TxDescrPerRing;	/* # of descriptors per tx ring */
+	int		RxDescrPerRing;	/* # of descriptors per rx ring */
+
+	caddr_t		pDescrMem;	/* Pointer to the descriptor area */
+	dma_addr_t	pDescrMemDMA;	/* PCI DMA address of area */
+
+	/* the port structures with descriptor rings */
+	TX_PORT		TxPort[SK_MAX_MACS][2];
+	RX_PORT		RxPort[SK_MAX_MACS];
+
+	unsigned int	CsOfs1;		/* for checksum calculation */
+	unsigned int	CsOfs2;		/* for checksum calculation */
+	SK_U32		CsOfs;		/* for checksum calculation */
+
+	SK_BOOL		CheckQueue;	/* check event queue soon */
+
+	/* Only for tests */
+	int		PortUp;
+	int		PortDown;
+
+};
+
+#endif /* __INC_SKDRV2ND_H */
diff --git a/drivers/net/sk98lin/h/skerror.h b/drivers/net/sk98lin/h/skerror.h
new file mode 100644
index 0000000..a454d9d
--- /dev/null
+++ b/drivers/net/sk98lin/h/skerror.h
@@ -0,0 +1,80 @@
+/******************************************************************************
+ *
+ * Name:	skerror.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.5 $
+ * Date:	$Date: 2002/04/25 11:05:10 $
+ * Purpose:	SK specific Error log support
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *	$Log: skerror.h,v $
+ *	Revision 1.5  2002/04/25 11:05:10  rschmidt
+ *	Editorial changes
+ *
+ *	Revision 1.4  1999/11/22 13:51:59  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.3  1999/09/14 14:04:42  rwahl
+ *	Added error base SK_ERRBASE_PECP.
+ *	Changed error base for driver.
+ *
+ *	Revision 1.2  1998/08/11 11:15:41  gklug
+ *	chg: comments
+ *
+ *	Revision 1.1  1998/08/11 11:09:38  gklug
+ *	add: error bases
+ *	add: error Classes
+ *	first version
+ *
+ *
+ *
+ ******************************************************************************/
+
+#ifndef _INC_SKERROR_H_
+#define _INC_SKERROR_H_
+
+/*
+ * Define Error Classes
+ */
+#define	SK_ERRCL_OTHER		(0)		/* Other error */
+#define	SK_ERRCL_CONFIG		(1L<<0)	/* Configuration error */
+#define	SK_ERRCL_INIT		(1L<<1)	/* Initialization error */
+#define	SK_ERRCL_NORES		(1L<<2)	/* Out of Resources error */
+#define	SK_ERRCL_SW			(1L<<3)	/* Internal Software error */
+#define	SK_ERRCL_HW			(1L<<4)	/* Hardware Failure */
+#define	SK_ERRCL_COMM		(1L<<5)	/* Communication error */
+
+
+/*
+ * Define Error Code Bases
+ */
+#define	SK_ERRBASE_RLMT		 100	/* Base Error number for RLMT */
+#define	SK_ERRBASE_HWINIT	 200	/* Base Error number for HWInit */
+#define	SK_ERRBASE_VPD		 300	/* Base Error number for VPD */
+#define	SK_ERRBASE_PNMI		 400	/* Base Error number for PNMI */
+#define	SK_ERRBASE_CSUM		 500	/* Base Error number for Checksum */
+#define	SK_ERRBASE_SIRQ		 600	/* Base Error number for Special IRQ */
+#define	SK_ERRBASE_I2C		 700	/* Base Error number for I2C module */
+#define	SK_ERRBASE_QUEUE	 800	/* Base Error number for Scheduler */
+#define	SK_ERRBASE_ADDR		 900	/* Base Error number for Address module */
+#define SK_ERRBASE_PECP		1000    /* Base Error number for PECP */
+#define	SK_ERRBASE_DRV		1100	/* Base Error number for Driver */
+
+#endif	/* _INC_SKERROR_H_ */
diff --git a/drivers/net/sk98lin/h/skgedrv.h b/drivers/net/sk98lin/h/skgedrv.h
new file mode 100644
index 0000000..72ba9ce
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgedrv.h
@@ -0,0 +1,72 @@
+/******************************************************************************
+ *
+ * Name:	skgedrv.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.6 $
+ * Date:	$Date: 2002/07/15 15:38:01 $
+ * Purpose:	Interface with the driver
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skgedrv.h,v $
+ *	Revision 1.6  2002/07/15 15:38:01  rschmidt
+ *	Power Management support
+ *	Editorial changes
+ *
+ *	Revision 1.5  2002/04/25 11:05:47  rschmidt
+ *	Editorial changes
+ *
+ *	Revision 1.4  1999/11/22 13:52:46  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.3  1998/12/01 13:31:39  cgoos
+ *	SWITCH INTERN Event added.
+ *
+ *	Revision 1.2  1998/11/25 08:28:38  gklug
+ *	rmv: PORT SWITCH Event
+ *
+ *	Revision 1.1  1998/09/29 06:14:07  gklug
+ *	add: driver events (initial version)
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKGEDRV_H_
+#define __INC_SKGEDRV_H_
+
+/* defines ********************************************************************/
+
+/*
+ * Define the driver events.
+ * Usually the events are defined by the destination module.
+ * In case of the driver we put the definition of the events here.
+ */
+#define SK_DRV_PORT_RESET		 1	/* The port needs to be reset */
+#define SK_DRV_NET_UP   		 2	/* The net is operational */
+#define SK_DRV_NET_DOWN			 3	/* The net is down */
+#define SK_DRV_SWITCH_SOFT		 4	/* Ports switch with both links connected */
+#define SK_DRV_SWITCH_HARD		 5	/* Port switch due to link failure */
+#define SK_DRV_RLMT_SEND		 6	/* Send a RLMT packet */
+#define SK_DRV_ADAP_FAIL		 7	/* The whole adapter fails */
+#define SK_DRV_PORT_FAIL		 8	/* One port fails */
+#define SK_DRV_SWITCH_INTERN	 9	/* Port switch by the driver itself */
+#define SK_DRV_POWER_DOWN		10	/* Power down mode */
+
+#endif	/* __INC_SKGEDRV_H_ */
diff --git a/drivers/net/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h
new file mode 100644
index 0000000..2c98427
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgehw.h
@@ -0,0 +1,2336 @@
+/******************************************************************************
+ *
+ * Name:	skgehw.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.49 $
+ * Date:	$Date: 2003/01/28 09:43:49 $
+ * Purpose:	Defines and Macros for the Gigabit Ethernet Adapter Product Family
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ * $Log: skgehw.h,v $
+ * Revision 1.49  2003/01/28 09:43:49  rschmidt
+ * Added defines for PCI-Spec. 2.3 IRQ
+ * Added defines for CLK_RUN (YUKON-Lite)
+ * Editorial changes
+ *
+ * Revision 1.48  2002/12/05 10:25:11  rschmidt
+ * Added defines for Half Duplex Burst Mode On/Off
+ * Added defines for Rx GMAC FIFO Flush feature
+ * Editorial changes
+ *
+ * Revision 1.47  2002/11/12 17:01:31  rschmidt
+ * Added defines for WOL_CTL_DEFAULT
+ * Editorial changes
+ *
+ * Revision 1.46  2002/10/14 14:47:57  rschmidt
+ * Corrected bit mask for HW self test results
+ * Added defines for WOL Registers
+ * Editorial changes
+ *
+ * Revision 1.45  2002/10/11 09:25:22  mkarl
+ * Added bit mask for HW self test results.
+ *
+ * Revision 1.44  2002/08/16 14:44:36  rschmidt
+ * Added define GPC_HWCFG_GMII_FIB for YUKON Fiber
+ *
+ * Revision 1.43  2002/08/12 13:31:50  rschmidt
+ * Corrected macros for GMAC Address Registers: GM_INADDR(),
+ * GM_OUTADDR(), GM_INHASH, GM_OUTHASH.
+ * Editorial changes
+ *
+ * Revision 1.42  2002/08/08 15:37:56  rschmidt
+ * Added defines for Power Management Capabilities
+ * Editorial changes
+ *
+ * Revision 1.41  2002/07/23 16:02:25  rschmidt
+ * Added macro WOL_REG() to access WOL reg. (HW-Bug in YUKON 1st rev.)
+ *
+ * Revision 1.40  2002/07/15 15:41:37  rschmidt
+ * Added new defines for Power Management Cap. & Control
+ * Editorial changes
+ *
+ * Revision 1.39  2002/06/10 09:37:07  rschmidt
+ * Added macros for the ADDR-Modul
+ *
+ * Revision 1.38  2002/06/05 08:15:19  rschmidt
+ * Added defines for WOL Registers
+ * Editorial changes
+ *
+ * Revision 1.37  2002/04/25 11:39:23  rschmidt
+ * Added new defines for PCI Our Register 1
+ * Added new registers and defines for YUKON (Rx FIFO, Tx FIFO,
+ * Time Stamp Timer, GMAC Control, GPHY Control,Link Control,
+ * GMAC IRQ Source and Mask, Wake-up Frame Pattern Match);
+ * Added new defines for Control/Status (VAUX available)
+ * Added Chip ID for YUKON
+ * Added define for descriptors with UDP ext. for YUKON
+ * Added macros to access the GMAC
+ * Added new Phy Type for Marvell 88E1011S (GPHY)
+ * Editorial changes
+ *
+ * Revision 1.36  2000/11/09 12:32:49  rassmann
+ * Renamed variables.
+ *
+ * Revision 1.35  2000/05/19 10:17:13  cgoos
+ * Added inactivity check in PHY_READ (in DEBUG mode only).
+ *
+ * Revision 1.34  1999/11/22 13:53:40  cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.33  1999/08/27 11:17:10  malthoff
+ * It's more savely to put brackets around macro parameters.
+ * Brackets added for PHY_READ and PHY_WRITE.
+ *
+ * Revision 1.32  1999/05/19 07:31:01  cgoos
+ * Changes for 1000Base-T.
+ * Added HWAC_LINK_LED macro.
+ *
+ * Revision 1.31  1999/03/12 13:27:40  malthoff
+ * Remove __STDC__.
+ *
+ * Revision 1.30  1999/02/09 09:28:20  malthoff
+ * Add PCI_ERRBITS.
+ *
+ * Revision 1.29  1999/01/26 08:55:48  malthoff
+ * Bugfix: The 16 bit field relations inside the descriptor are
+ * 	endianess dependend if the descriptor reversal feature
+ * 	(PCI_REV_DESC bit in PCI_OUR_REG_2) is enabled.
+ * 	Drivers which use this feature has to set the define
+ * 	SK_USE_REV_DESC.
+ *
+ * Revision 1.28  1998/12/10 11:10:22  malthoff
+ * bug fix: IS_IRQ_STAT and IS_IRQ_MST_ERR has been twisted.
+ *
+ * Revision 1.27  1998/11/13 14:19:21  malthoff
+ * Bug Fix: The bit definition of B3_PA_CTRL has completely
+ * changed from HW Spec v1.3 to v1.5.
+ *
+ * Revision 1.26  1998/11/04 08:31:48  cgoos
+ * Fixed byte ordering in XM_OUTADDR/XM_OUTHASH macros.
+ *
+ * Revision 1.25  1998/11/04 07:16:25  cgoos
+ * Changed byte ordering in XM_INADDR/XM_INHASH again.
+ *
+ * Revision 1.24  1998/11/02 11:08:43  malthoff
+ * RxCtrl and TxCtrl must be volatile.
+ *
+ * Revision 1.23  1998/10/28 13:50:45  malthoff
+ * Fix: Endian support missing in XM_IN/OUT-ADDR/HASH macros.
+ *
+ * Revision 1.22  1998/10/26 08:01:36  malthoff
+ * RX_MFF_CTRL1 is split up into RX_MFF_CTRL1,
+ * RX_MFF_STAT_TO, and RX_MFF_TIST_TO.
+ * TX_MFF_CTRL1 is split up TX_MFF_CTRL1 and TX_MFF_WAF.
+ *
+ * Revision 1.21  1998/10/20 07:43:10  malthoff
+ * Fix: XM_IN/OUT/ADDR/HASH macros:
+ * The pointer must be casted.
+ *
+ * Revision 1.20  1998/10/19 15:53:59  malthoff
+ * Remove ML proto definitions.
+ *
+ * Revision 1.19  1998/10/16 14:40:17  gklug
+ * fix: typo B0_XM_IMSK regs
+ *
+ * Revision 1.18  1998/10/16 09:46:54  malthoff
+ * Remove temp defines for ML diag prototype.
+ * Fix register definition for B0_XM1_PHY_DATA, B0_XM1_PHY_DATA
+ * B0_XM2_PHY_DATA, B0_XM2_PHY_ADDR, B0_XA1_CSR, B0_XS1_CSR,
+ * B0_XS2_CSR, and B0_XA2_CSR.
+ *
+ * Revision 1.17  1998/10/14 06:03:14  cgoos
+ * Changed shifted constant to ULONG.
+ *
+ * Revision 1.16  1998/10/09 07:05:41  malthoff
+ * Rename ALL_PA_ENA_TO to PA_ENA_TO_ALL.
+ *
+ * Revision 1.15  1998/10/05 07:54:23  malthoff
+ * Split up RB_CTRL and it's bit definition into
+ * RB_CTRL, RB_TST1, and RB_TST2.
+ * Rename RB_RX_HTPP to RB_RX_LTPP.
+ * Add ALL_PA_ENA_TO. Modify F_WATER_MARK
+ * according to HW Spec. v1.5.
+ * Add MFF_TX_CTRL_DEF.
+ *
+ * Revision 1.14  1998/09/28 13:31:16  malthoff
+ * bug fix: B2_MAC_3 is 0x110 not 0x114
+ *
+ * Revision 1.13  1998/09/24 14:42:56  malthoff
+ * Split the RX_MFF_TST into RX_MFF_CTRL2,
+ * RX_MFF_TST1, and RX_MFF_TST2.
+ * Rename RX_MFF_CTRL to RX_MFF_CTRL1.
+ * Add BMU bit CSR_SV_IDLE.
+ * Add macros PHY_READ() and PHY_WRITE().
+ * Rename macro SK_ADDR() to SK_HW_ADDR()
+ * because of conflicts with the Address Module.
+ *
+ * Revision 1.12  1998/09/16 07:25:33  malthoff
+ * Change the parameter order in the XM_INxx and XM_OUTxx macros,
+ * to have the IoC as first parameter.
+ *
+ * Revision 1.11  1998/09/03 09:58:41  malthoff
+ * Rework the XM_xxx macros. Use {} instead of () to
+ * be compatible with SK_xxx macros which are defined
+ * with {}.
+ *
+ * Revision 1.10  1998/09/02 11:16:39  malthoff
+ * Temporary modify B2_I2C_SW to make tests with
+ * the GE/ML prototype.
+ *
+ * Revision 1.9  1998/08/19 09:11:49  gklug
+ * fix: struct are removed from c-source (see CCC)
+ * add: typedefs for all structs
+ *
+ * Revision 1.8  1998/08/18 08:27:27  malthoff
+ * Add some temporary workarounds to test GE
+ * sources with the ML.
+ *
+ * Revision 1.7  1998/07/03 14:42:26  malthoff
+ * bug fix: Correct macro XMA().
+ * Add temporary workaround to access the PCI config space over I/O
+ *
+ * Revision 1.6  1998/06/23 11:30:36  malthoff
+ * Remove ';' with ',' in macors.
+ *
+ * Revision 1.5  1998/06/22 14:20:57  malthoff
+ * Add macro SK_ADDR(Base,Addr).
+ *
+ * Revision 1.4  1998/06/19 13:35:43  malthoff
+ * change 'pGec' with 'pAC'
+ *
+ * Revision 1.3  1998/06/17 14:58:16  cvs
+ * Lost keywords reinserted.
+ *
+ * Revision 1.1  1998/06/17 14:16:36  cvs
+ * created
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKGEHW_H
+#define __INC_SKGEHW_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif	/* __cplusplus */
+
+/* defines ********************************************************************/
+
+#define BIT_31		(1UL << 31)
+#define BIT_30		(1L << 30)
+#define BIT_29		(1L << 29)
+#define BIT_28		(1L << 28)
+#define BIT_27		(1L << 27)
+#define BIT_26		(1L << 26)
+#define BIT_25		(1L << 25)
+#define BIT_24		(1L << 24)
+#define BIT_23		(1L << 23)
+#define BIT_22		(1L << 22)
+#define BIT_21		(1L << 21)
+#define BIT_20		(1L << 20)
+#define BIT_19		(1L << 19)
+#define BIT_18		(1L << 18)
+#define BIT_17		(1L << 17)
+#define BIT_16		(1L << 16)
+#define BIT_15		(1L << 15)
+#define BIT_14		(1L << 14)
+#define BIT_13		(1L << 13)
+#define BIT_12		(1L << 12)
+#define BIT_11		(1L << 11)
+#define BIT_10		(1L << 10)
+#define BIT_9		(1L << 9)
+#define BIT_8		(1L << 8)
+#define BIT_7		(1L << 7)
+#define BIT_6		(1L << 6)
+#define BIT_5		(1L << 5)
+#define BIT_4		(1L << 4)
+#define BIT_3		(1L << 3)
+#define BIT_2		(1L << 2)
+#define BIT_1		(1L << 1)
+#define BIT_0		1L
+
+#define BIT_15S		(1U << 15)
+#define BIT_14S		(1 << 14)
+#define BIT_13S		(1 << 13)
+#define BIT_12S		(1 << 12)
+#define BIT_11S		(1 << 11)
+#define BIT_10S		(1 << 10)
+#define BIT_9S		(1 << 9)
+#define BIT_8S		(1 << 8)
+#define BIT_7S 		(1 << 7)
+#define BIT_6S		(1 << 6)
+#define BIT_5S		(1 << 5)
+#define BIT_4S		(1 << 4)
+#define BIT_3S		(1 << 3)
+#define BIT_2S		(1 << 2)
+#define BIT_1S		(1 << 1)
+#define BIT_0S		1
+
+#define SHIFT31(x)	((x) << 31)
+#define SHIFT30(x)	((x) << 30)
+#define SHIFT29(x)	((x) << 29)
+#define SHIFT28(x)	((x) << 28)
+#define SHIFT27(x)	((x) << 27)
+#define SHIFT26(x)	((x) << 26)
+#define SHIFT25(x)	((x) << 25)
+#define SHIFT24(x)	((x) << 24)
+#define SHIFT23(x)	((x) << 23)
+#define SHIFT22(x)	((x) << 22)
+#define SHIFT21(x)	((x) << 21)
+#define SHIFT20(x)	((x) << 20)
+#define SHIFT19(x)	((x) << 19)
+#define SHIFT18(x)	((x) << 18)
+#define SHIFT17(x)	((x) << 17)
+#define SHIFT16(x)	((x) << 16)
+#define SHIFT15(x)	((x) << 15)
+#define SHIFT14(x)	((x) << 14)
+#define SHIFT13(x)	((x) << 13)
+#define SHIFT12(x)	((x) << 12)
+#define SHIFT11(x)	((x) << 11)
+#define SHIFT10(x)	((x) << 10)
+#define SHIFT9(x)	((x) << 9)
+#define SHIFT8(x)	((x) << 8)
+#define SHIFT7(x)	((x) << 7)
+#define SHIFT6(x)	((x) << 6)
+#define SHIFT5(x)	((x) << 5)
+#define SHIFT4(x)	((x) << 4)
+#define SHIFT3(x)	((x) << 3)
+#define SHIFT2(x)	((x) << 2)
+#define SHIFT1(x)	((x) << 1)
+#define SHIFT0(x)	((x) << 0)
+
+/*
+ * Configuration Space header
+ * Since this module is used for different OS', those may be
+ * duplicate on some of them (e.g. Linux). But to keep the
+ * common source, we have to live with this...
+ */
+#define PCI_VENDOR_ID	0x00	/* 16 bit	Vendor ID */
+#define PCI_DEVICE_ID	0x02	/* 16 bit	Device ID */
+#define PCI_COMMAND		0x04	/* 16 bit	Command */
+#define PCI_STATUS		0x06	/* 16 bit	Status */
+#define PCI_REV_ID		0x08	/*  8 bit	Revision ID */
+#if 0
+#define PCI_CLASS_CODE	0x09	/* 24 bit	Class Code */
+#endif
+#define PCI_CACHE_LSZ	0x0c	/*  8 bit	Cache Line Size */
+#define PCI_LAT_TIM		0x0d	/*  8 bit	Latency Timer */
+#define PCI_HEADER_T	0x0e	/*  8 bit	Header Type */
+#define PCI_BIST		0x0f	/*  8 bit	Built-in selftest */
+#define PCI_BASE_1ST	0x10	/* 32 bit	1st Base address */
+#define PCI_BASE_2ND	0x14	/* 32 bit	2nd Base address */
+	/* Byte 0x18..0x2b:	reserved */
+#define PCI_SUB_VID		0x2c	/* 16 bit	Subsystem Vendor ID */
+#define PCI_SUB_ID		0x2e	/* 16 bit	Subsystem ID */
+#define PCI_BASE_ROM	0x30	/* 32 bit	Expansion ROM Base Address */
+#define PCI_CAP_PTR		0x34	/*  8 bit 	Capabilities Ptr */
+	/* Byte 35..3b:	reserved */
+#define PCI_IRQ_LINE	0x3c	/*  8 bit	Interrupt Line */
+#define PCI_IRQ_PIN		0x3d	/*  8 bit	Interrupt Pin */
+#define PCI_MIN_GNT		0x3e	/*  8 bit	Min_Gnt */
+#define PCI_MAX_LAT		0x3f	/*  8 bit	Max_Lat */
+	/* Device Dependent Region */
+#define PCI_OUR_REG_1	0x40	/* 32 bit 	Our Register 1 */
+#define PCI_OUR_REG_2	0x44	/* 32 bit 	Our Register 2 */
+	/* Power Management Region */
+#define PCI_PM_CAP_ID	0x48	/*  8 bit 	Power Management Cap. ID */
+#define PCI_PM_NITEM	0x49	/*  8 bit 	Next Item Ptr */
+#define PCI_PM_CAP_REG	0x4a	/* 16 bit 	Power Management Capabilities */
+#define PCI_PM_CTL_STS	0x4c	/* 16 bit 	Power Manag. Control/Status */
+	/* Byte 0x4e:	reserved */
+#define PCI_PM_DAT_REG	0x4f	/*  8 bit 	Power Manag. Data Register */
+	/* VPD Region */
+#define PCI_VPD_CAP_ID	0x50	/*  8 bit 	VPD Cap. ID */
+#define PCI_VPD_NITEM	0x51	/*  8 bit 	Next Item Ptr */
+#define PCI_VPD_ADR_REG	0x52	/* 16 bit 	VPD Address Register */
+#define PCI_VPD_DAT_REG	0x54	/* 32 bit 	VPD Data Register */
+	/* Byte 0x58..0xff:	reserved */
+
+/*
+ * I2C Address (PCI Config)
+ *
+ * Note: The temperature and voltage sensors are relocated on a different
+ *	 I2C bus.
+ */
+#define I2C_ADDR_VPD	0xA0	/* I2C address for the VPD EEPROM */
+
+/*
+ * Define Bits and Values of the registers
+ */
+/*	PCI_COMMAND	16 bit	Command */
+								/* Bit 15..11:	reserved */
+#define PCI_INT_DIS		BIT_10S		/* Interrupt INTx# disable (PCI 2.3) */
+#define PCI_FBTEN		BIT_9S		/* Fast Back-To-Back enable */
+#define PCI_SERREN		BIT_8S		/* SERR enable */
+#define PCI_ADSTEP		BIT_7S		/* Address Stepping */
+#define PCI_PERREN		BIT_6S		/* Parity Report Response enable */
+#define PCI_VGA_SNOOP	BIT_5S		/* VGA palette snoop */
+#define PCI_MWIEN		BIT_4S		/* Memory write an inv cycl ena */
+#define PCI_SCYCEN		BIT_3S		/* Special Cycle enable */
+#define PCI_BMEN		BIT_2S		/* Bus Master enable */
+#define PCI_MEMEN		BIT_1S		/* Memory Space Access enable */
+#define PCI_IOEN		BIT_0S		/* I/O Space Access enable */
+
+#define PCI_COMMAND_VAL	(PCI_FBTEN | PCI_SERREN | PCI_PERREN | PCI_MWIEN |\
+						 PCI_BMEN | PCI_MEMEN | PCI_IOEN)
+
+/*	PCI_STATUS	16 bit	Status */
+#define PCI_PERR		BIT_15S		/* Parity Error */
+#define PCI_SERR		BIT_14S		/* Signaled SERR */
+#define PCI_RMABORT		BIT_13S		/* Received Master Abort */
+#define PCI_RTABORT		BIT_12S		/* Received Target Abort */
+								/* Bit 11:	reserved */
+#define PCI_DEVSEL		(3<<9)		/* Bit 10.. 9:	DEVSEL Timing */
+#define PCI_DEV_FAST	(0<<9)		/*		fast */
+#define PCI_DEV_MEDIUM	(1<<9)		/*		medium */
+#define PCI_DEV_SLOW	(2<<9)		/*		slow */
+#define PCI_DATAPERR	BIT_8S		/* DATA Parity error detected */
+#define PCI_FB2BCAP		BIT_7S		/* Fast Back-to-Back Capability */
+#define PCI_UDF			BIT_6S		/* User Defined Features */
+#define PCI_66MHZCAP	BIT_5S		/* 66 MHz PCI bus clock capable */
+#define PCI_NEWCAP		BIT_4S		/* New cap. list implemented */
+#define PCI_INT_STAT	BIT_3S		/* Interrupt INTx# Status (PCI 2.3) */
+								/* Bit  2.. 0:	reserved */
+
+#define PCI_ERRBITS	(PCI_PERR | PCI_SERR | PCI_RMABORT | PCI_RTABORT |\
+			PCI_DATAPERR)
+
+/*	PCI_CLASS_CODE	24 bit	Class Code */
+/*	Byte 2:		Base Class		(02) */
+/*	Byte 1:		SubClass		(00) */
+/*	Byte 0:		Programming Interface	(00) */
+
+/*	PCI_CACHE_LSZ	8 bit	Cache Line Size */
+/*	Possible values: 0,2,4,8,16,32,64,128	*/
+
+/*	PCI_HEADER_T	8 bit	Header Type */
+#define PCI_HD_MF_DEV	BIT_7S	/* 0= single, 1= multi-func dev */
+#define PCI_HD_TYPE		0x7f	/* Bit 6..0:	Header Layout 0= normal */
+
+/*	PCI_BIST	8 bit	Built-in selftest */
+/*	Built-in Self test not supported (optional) */
+
+/*	PCI_BASE_1ST	32 bit	1st Base address */
+#define PCI_MEMSIZE		0x4000L		/* use 16 kB Memory Base */
+#define PCI_MEMBASE_MSK 0xffffc000L	/* Bit 31..14:	Memory Base Address */
+#define PCI_MEMSIZE_MSK 0x00003ff0L	/* Bit 13.. 4:	Memory Size Req. */
+#define PCI_PREFEN		BIT_3		/* Prefetchable */
+#define PCI_MEM_TYP		(3L<<2)		/* Bit	2.. 1:	Memory Type */
+#define PCI_MEM32BIT	(0L<<1)		/* Base addr anywhere in 32 Bit range */
+#define PCI_MEM1M		(1L<<1)		/* Base addr below 1 MegaByte */
+#define PCI_MEM64BIT	(2L<<1)		/* Base addr anywhere in 64 Bit range */
+#define PCI_MEMSPACE	BIT_0		/* Memory Space Indic. */
+
+/*	PCI_BASE_2ND	32 bit	2nd Base address */
+#define PCI_IOBASE		0xffffff00L	/* Bit 31.. 8:	I/O Base address */
+#define PCI_IOSIZE		0x000000fcL	/* Bit	7.. 2:	I/O Size Requirements */
+									/* Bit	1:	reserved */
+#define PCI_IOSPACE		BIT_0		/* I/O Space Indicator */
+
+/*	PCI_BASE_ROM	32 bit	Expansion ROM Base Address */
+#define PCI_ROMBASE		0xfffe0000L	/* Bit 31..17:	ROM BASE address (1st)*/
+#define PCI_ROMBASZ		(0x1cL<<14)	/* Bit 16..14:	Treat as BASE or SIZE */
+#define PCI_ROMSIZE		(0x38L<<11)	/* Bit 13..11:	ROM Size Requirements */
+									/* Bit 10.. 1:	reserved */
+#define PCI_ROMEN		BIT_0		/* Address Decode enable */
+
+/* Device Dependent Region */
+/*	PCI_OUR_REG_1		32 bit	Our Register 1 */
+									/* Bit 31..29:	reserved */
+#define PCI_PHY_COMA	BIT_28		/* Set PHY to Coma Mode */
+#define PCI_EN_CAL		BIT_27		/* Enable  PCI buffer strength calibr. */
+#define PCI_DIS_CAL		BIT_26		/* Disable PCI buffer strength calibr. */
+#define PCI_VIO			BIT_25		/* PCI I/O Voltage, 0 = 3.3V, 1 = 5V */
+#define PCI_DIS_BOOT	BIT_24		/* Disable BOOT via ROM */
+#define PCI_EN_IO		BIT_23		/* Mapping to I/O space */
+#define PCI_EN_FPROM	BIT_22		/* Enable FLASH mapping to memory */
+									/*		1 = Map Flash to memory */
+									/*		0 = Disable addr. dec */
+#define PCI_PAGESIZE	(3L<<20)	/* Bit 21..20:	FLASH Page Size	*/
+#define PCI_PAGE_16		(0L<<20)	/*		16 k pages	*/
+#define PCI_PAGE_32K	(1L<<20)	/*		32 k pages	*/
+#define PCI_PAGE_64K	(2L<<20)	/*		64 k pages	*/
+#define PCI_PAGE_128K	(3L<<20)	/*		128 k pages	*/
+									/* Bit 19:	reserved	*/
+#define PCI_PAGEREG		(7L<<16)	/* Bit 18..16:	Page Register	*/
+#define PCI_NOTAR		BIT_15		/* No turnaround cycle */
+#define PCI_FORCE_BE	BIT_14		/* Assert all BEs on MR */
+#define PCI_DIS_MRL		BIT_13		/* Disable Mem Read Line */
+#define PCI_DIS_MRM		BIT_12		/* Disable Mem Read Multiple */
+#define PCI_DIS_MWI		BIT_11		/* Disable Mem Write & Invalidate */
+#define PCI_DISC_CLS	BIT_10		/* Disc: cacheLsz bound */
+#define PCI_BURST_DIS	BIT_9		/* Burst Disable */
+#define PCI_DIS_PCI_CLK	BIT_8		/* Disable PCI clock driving */
+#define PCI_SKEW_DAS	(0xfL<<4)	/* Bit	7.. 4:	Skew Ctrl, DAS Ext */
+#define PCI_SKEW_BASE	0xfL		/* Bit	3.. 0:	Skew Ctrl, Base	*/
+
+
+/*	PCI_OUR_REG_2		32 bit	Our Register 2 */
+#define PCI_VPD_WR_THR	(0xffL<<24)	/* Bit 31..24:	VPD Write Threshold */
+#define PCI_DEV_SEL		(0x7fL<<17)	/* Bit 23..17:	EEPROM Device Select */
+#define PCI_VPD_ROM_SZ	(7L<<14)	/* Bit 16..14:	VPD ROM Size	*/
+									/* Bit 13..12:	reserved	*/
+#define PCI_PATCH_DIR	(0xfL<<8)	/* Bit 11.. 8:	Ext Patches dir 3..0 */
+#define PCI_PATCH_DIR_3	BIT_11
+#define PCI_PATCH_DIR_2	BIT_10
+#define PCI_PATCH_DIR_1	BIT_9
+#define PCI_PATCH_DIR_0	BIT_8
+#define PCI_EXT_PATCHS	(0xfL<<4)	/* Bit	7.. 4:	Extended Patches 3..0 */
+#define PCI_EXT_PATCH_3	BIT_7
+#define PCI_EXT_PATCH_2	BIT_6
+#define PCI_EXT_PATCH_1	BIT_5
+#define PCI_EXT_PATCH_0	BIT_4
+#define PCI_EN_DUMMY_RD	BIT_3		/* Enable Dummy Read */
+#define PCI_REV_DESC	BIT_2		/* Reverse Desc. Bytes */
+									/* Bit	1:	reserved */
+#define PCI_USEDATA64	BIT_0		/* Use 64Bit Data bus ext */
+
+
+/* Power Management Region */
+/*	PCI_PM_CAP_REG		16 bit	Power Management Capabilities */
+#define PCI_PME_SUP_MSK	(0x1f<<11)	/* Bit 15..11:	PM Event Support Mask */
+#define PCI_PME_D3C_SUP	BIT_15S		/* PME from D3cold Support (if Vaux) */
+#define PCI_PME_D3H_SUP	BIT_14S		/* PME from D3hot Support */
+#define PCI_PME_D2_SUP	BIT_13S		/* PME from D2 Support */
+#define PCI_PME_D1_SUP	BIT_12S		/* PME from D1 Support */
+#define PCI_PME_D0_SUP	BIT_11S		/* PME from D0 Support */
+#define PCI_PM_D2_SUP	BIT_10S		/* D2 Support in 33 MHz mode */
+#define PCI_PM_D1_SUP	BIT_9S		/* D1 Support */
+									/* Bit	8.. 6:	reserved */
+#define PCI_PM_DSI		BIT_5S		/* Device Specific Initialization */
+#define PCI_PM_APS		BIT_4S		/* Auxialiary Power Source */
+#define PCI_PME_CLOCK	BIT_3S		/* PM Event Clock */
+#define PCI_PM_VER_MSK		7		/* Bit	2.. 0:	PM PCI Spec. version */
+
+/*	PCI_PM_CTL_STS		16 bit	Power Management Control/Status */
+#define PCI_PME_STATUS	BIT_15S		/* PME Status (YUKON only) */
+#define PCI_PM_DAT_SCL	(3<<13)		/* Bit 14..13:	Data Reg. scaling factor */
+#define PCI_PM_DAT_SEL	(0xf<<9)	/* Bit 12.. 9:	PM data selector field */
+#define PCI_PME_EN		BIT_8S		/* Enable PME# generation (YUKON only) */
+									/* Bit	7.. 2:	reserved */
+#define PCI_PM_STATE_MSK	3		/* Bit	1.. 0:	Power Management State */
+
+#define PCI_PM_STATE_D0		0		/* D0:	Operational (default) */
+#define PCI_PM_STATE_D1		1		/* D1:	(YUKON only) */
+#define PCI_PM_STATE_D2		2		/* D2:	(YUKON only) */
+#define PCI_PM_STATE_D3 	3		/* D3:	HOT, Power Down and Reset */
+
+/* VPD Region */
+/*	PCI_VPD_ADR_REG		16 bit	VPD Address Register */
+#define PCI_VPD_FLAG	BIT_15S		/* starts VPD rd/wr cycle */
+#define PCI_VPD_ADR_MSK	0x7fffL		/* Bit 14.. 0:	VPD address mask */
+
+/*	Control Register File (Address Map) */
+
+/*
+ *	Bank 0
+ */
+#define B0_RAP			0x0000	/*  8 bit	Register Address Port */
+	/* 0x0001 - 0x0003:	reserved */
+#define B0_CTST			0x0004	/* 16 bit	Control/Status register */
+#define B0_LED			0x0006	/*  8 Bit	LED register */
+#define B0_POWER_CTRL	0x0007	/*  8 Bit	Power Control reg (YUKON only) */
+#define B0_ISRC			0x0008	/* 32 bit	Interrupt Source Register */
+#define B0_IMSK			0x000c	/* 32 bit	Interrupt Mask Register */
+#define B0_HWE_ISRC		0x0010	/* 32 bit	HW Error Interrupt Src Reg */
+#define B0_HWE_IMSK		0x0014	/* 32 bit	HW Error Interrupt Mask Reg */
+#define B0_SP_ISRC		0x0018	/* 32 bit	Special Interrupt Source Reg */
+	/* 0x001c:		reserved */
+
+/* B0 XMAC 1 registers (GENESIS only) */
+#define B0_XM1_IMSK		0x0020	/* 16 bit r/w	XMAC 1 Interrupt Mask Register*/
+	/* 0x0022 - 0x0027:	reserved */
+#define B0_XM1_ISRC		0x0028	/* 16 bit ro	XMAC 1 Interrupt Status Reg */
+	/* 0x002a - 0x002f:	reserved */
+#define B0_XM1_PHY_ADDR 0x0030	/* 16 bit r/w	XMAC 1 PHY Address Register */
+	/* 0x0032 - 0x0033:	reserved */
+#define B0_XM1_PHY_DATA 0x0034	/* 16 bit r/w	XMAC 1 PHY Data Register */
+	/* 0x0036 - 0x003f:	reserved */
+
+/* B0 XMAC 2 registers (GENESIS only) */
+#define B0_XM2_IMSK		0x0040	/* 16 bit r/w	XMAC 2 Interrupt Mask Register*/
+	/* 0x0042 - 0x0047:	reserved */
+#define B0_XM2_ISRC		0x0048	/* 16 bit ro	XMAC 2 Interrupt Status Reg */
+	/* 0x004a - 0x004f:	reserved */
+#define B0_XM2_PHY_ADDR 0x0050	/* 16 bit r/w	XMAC 2 PHY Address Register */
+	/* 0x0052 - 0x0053:	reserved */
+#define B0_XM2_PHY_DATA 0x0054	/* 16 bit r/w	XMAC 2 PHY Data Register */
+	/* 0x0056 - 0x005f:	reserved */
+
+/* BMU Control Status Registers */
+#define B0_R1_CSR		0x0060	/* 32 bit	BMU Ctrl/Stat Rx Queue 1 */
+#define B0_R2_CSR		0x0064	/* 32 bit	BMU Ctrl/Stat Rx Queue 2 */
+#define B0_XS1_CSR		0x0068	/* 32 bit	BMU Ctrl/Stat Sync Tx Queue 1 */
+#define B0_XA1_CSR		0x006c	/* 32 bit	BMU Ctrl/Stat Async Tx Queue 1*/
+#define B0_XS2_CSR		0x0070	/* 32 bit	BMU Ctrl/Stat Sync Tx Queue 2 */
+#define B0_XA2_CSR		0x0074	/* 32 bit	BMU Ctrl/Stat Async Tx Queue 2*/
+	/* 0x0078 - 0x007f:	reserved */
+
+/*
+ *	Bank 1
+ *	- completely empty (this is the RAP Block window)
+ *	Note: if RAP = 1 this page is reserved
+ */
+
+/*
+ *	Bank 2
+ */
+/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */
+#define B2_MAC_1		0x0100	/* NA reg	 MAC Address 1 */
+	/* 0x0106 - 0x0107:	reserved */
+#define B2_MAC_2		0x0108	/* NA reg	 MAC Address 2 */
+	/* 0x010e - 0x010f:	reserved */
+#define B2_MAC_3		0x0110	/* NA reg	 MAC Address 3 */
+	/* 0x0116 - 0x0117:	reserved */
+#define B2_CONN_TYP		0x0118	/*  8 bit	Connector type */
+#define B2_PMD_TYP		0x0119	/*  8 bit	PMD type */
+#define B2_MAC_CFG		0x011a	/*  8 bit	MAC Configuration / Chip Revision */
+#define B2_CHIP_ID		0x011b	/*  8 bit 	Chip Identification Number */
+	/* Eprom registers are currently of no use */
+#define B2_E_0			0x011c	/*  8 bit	EPROM Byte 0 (ext. SRAM size */
+#define B2_E_1			0x011d	/*  8 bit	EPROM Byte 1 (PHY type) */
+#define B2_E_2			0x011e	/*  8 bit	EPROM Byte 2 */
+#define B2_E_3			0x011f	/*  8 bit	EPROM Byte 3 */
+#define B2_FAR			0x0120	/* 32 bit	Flash-Prom Addr Reg/Cnt */
+#define B2_FDP			0x0124	/*  8 bit	Flash-Prom Data Port */
+	/* 0x0125 - 0x0127:	reserved */
+#define B2_LD_CRTL		0x0128	/*  8 bit	EPROM loader control register */
+#define B2_LD_TEST		0x0129	/*  8 bit	EPROM loader test register */
+	/* 0x012a - 0x012f:	reserved */
+#define B2_TI_INI		0x0130	/* 32 bit	Timer Init Value */
+#define B2_TI_VAL		0x0134	/* 32 bit	Timer Value */
+#define B2_TI_CRTL		0x0138	/*  8 bit	Timer Control */
+#define B2_TI_TEST		0x0139	/*  8 Bit	Timer Test */
+	/* 0x013a - 0x013f:	reserved */
+#define B2_IRQM_INI		0x0140	/* 32 bit	IRQ Moderation Timer Init Reg.*/
+#define B2_IRQM_VAL		0x0144	/* 32 bit	IRQ Moderation Timer Value */
+#define B2_IRQM_CTRL	0x0148	/*  8 bit	IRQ Moderation Timer Control */
+#define B2_IRQM_TEST	0x0149	/*  8 bit	IRQ Moderation Timer Test */
+#define B2_IRQM_MSK 	0x014c	/* 32 bit	IRQ Moderation Mask */
+#define B2_IRQM_HWE_MSK 0x0150	/* 32 bit	IRQ Moderation HW Error Mask */
+	/* 0x0154 - 0x0157:	reserved */
+#define B2_TST_CTRL1	0x0158	/*  8 bit	Test Control Register 1 */
+#define B2_TST_CTRL2	0x0159	/*  8 bit	Test Control Register 2 */
+	/* 0x015a - 0x015b:	reserved */
+#define B2_GP_IO		0x015c	/* 32 bit	General Purpose I/O Register */
+#define B2_I2C_CTRL		0x0160	/* 32 bit	I2C HW Control Register */
+#define B2_I2C_DATA		0x0164	/* 32 bit	I2C HW Data Register */
+#define B2_I2C_IRQ		0x0168	/* 32 bit	I2C HW IRQ Register */
+#define B2_I2C_SW		0x016c	/* 32 bit	I2C SW Port Register */
+
+/* Blink Source Counter (GENESIS only) */
+#define B2_BSC_INI		0x0170	/* 32 bit	Blink Source Counter Init Val */
+#define B2_BSC_VAL		0x0174	/* 32 bit	Blink Source Counter Value */
+#define B2_BSC_CTRL		0x0178	/*  8 bit	Blink Source Counter Control */
+#define B2_BSC_STAT		0x0179	/*  8 bit	Blink Source Counter Status */
+#define B2_BSC_TST		0x017a	/* 16 bit	Blink Source Counter Test Reg */
+	/* 0x017c - 0x017f:	reserved */
+
+/*
+ *	Bank 3
+ */
+/* RAM Random Registers */
+#define B3_RAM_ADDR		0x0180	/* 32 bit	RAM Address, to read or write */
+#define B3_RAM_DATA_LO	0x0184	/* 32 bit	RAM Data Word (low dWord) */
+#define B3_RAM_DATA_HI	0x0188	/* 32 bit	RAM Data Word (high dWord) */
+	/* 0x018c - 0x018f:	reserved */
+
+/* RAM Interface Registers */
+/*
+ * The HW-Spec. calls this registers Timeout Value 0..11. But this names are
+ * not usable in SW. Please notice these are NOT real timeouts, these are
+ * the number of qWords transferred continuously.
+ */
+#define B3_RI_WTO_R1	0x0190	/*  8 bit	WR Timeout Queue R1		(TO0) */
+#define B3_RI_WTO_XA1	0x0191	/*  8 bit	WR Timeout Queue XA1	(TO1) */
+#define B3_RI_WTO_XS1	0x0192	/*  8 bit	WR Timeout Queue XS1	(TO2) */
+#define B3_RI_RTO_R1	0x0193	/*  8 bit	RD Timeout Queue R1		(TO3) */
+#define B3_RI_RTO_XA1	0x0194	/*  8 bit	RD Timeout Queue XA1	(TO4) */
+#define B3_RI_RTO_XS1	0x0195	/*  8 bit	RD Timeout Queue XS1	(TO5) */
+#define B3_RI_WTO_R2	0x0196	/*  8 bit	WR Timeout Queue R2		(TO6) */
+#define B3_RI_WTO_XA2	0x0197	/*  8 bit	WR Timeout Queue XA2	(TO7) */
+#define B3_RI_WTO_XS2	0x0198	/*  8 bit	WR Timeout Queue XS2	(TO8) */
+#define B3_RI_RTO_R2	0x0199	/*  8 bit	RD Timeout Queue R2		(TO9) */
+#define B3_RI_RTO_XA2	0x019a	/*  8 bit	RD Timeout Queue XA2	(TO10)*/
+#define B3_RI_RTO_XS2	0x019b	/*  8 bit	RD Timeout Queue XS2	(TO11)*/
+#define B3_RI_TO_VAL	0x019c	/*  8 bit	Current Timeout Count Val */
+	/* 0x019d - 0x019f:	reserved */
+#define B3_RI_CTRL		0x01a0	/* 16 bit	RAM Interface Control Register */
+#define B3_RI_TEST		0x01a2	/*  8 bit	RAM Interface Test Register */
+	/* 0x01a3 - 0x01af:	reserved */
+
+/* MAC Arbiter Registers (GENESIS only) */
+/* these are the no. of qWord transferred continuously and NOT real timeouts */
+#define B3_MA_TOINI_RX1	0x01b0	/*  8 bit	Timeout Init Val Rx Path MAC 1 */
+#define B3_MA_TOINI_RX2	0x01b1	/*  8 bit	Timeout Init Val Rx Path MAC 2 */
+#define B3_MA_TOINI_TX1	0x01b2	/*  8 bit	Timeout Init Val Tx Path MAC 1 */
+#define B3_MA_TOINI_TX2	0x01b3	/*  8 bit	Timeout Init Val Tx Path MAC 2 */
+#define B3_MA_TOVAL_RX1	0x01b4	/*  8 bit	Timeout Value Rx Path MAC 1 */
+#define B3_MA_TOVAL_RX2	0x01b5	/*  8 bit	Timeout Value Rx Path MAC 1 */
+#define B3_MA_TOVAL_TX1	0x01b6	/*  8 bit	Timeout Value Tx Path MAC 2 */
+#define B3_MA_TOVAL_TX2	0x01b7	/*  8 bit	Timeout Value Tx Path MAC 2 */
+#define B3_MA_TO_CTRL	0x01b8	/* 16 bit	MAC Arbiter Timeout Ctrl Reg */
+#define B3_MA_TO_TEST	0x01ba	/* 16 bit	MAC Arbiter Timeout Test Reg */
+	/* 0x01bc - 0x01bf:	reserved */
+#define B3_MA_RCINI_RX1	0x01c0	/*  8 bit	Recovery Init Val Rx Path MAC 1 */
+#define B3_MA_RCINI_RX2	0x01c1	/*  8 bit	Recovery Init Val Rx Path MAC 2 */
+#define B3_MA_RCINI_TX1	0x01c2	/*  8 bit	Recovery Init Val Tx Path MAC 1 */
+#define B3_MA_RCINI_TX2	0x01c3	/*  8 bit	Recovery Init Val Tx Path MAC 2 */
+#define B3_MA_RCVAL_RX1	0x01c4	/*  8 bit	Recovery Value Rx Path MAC 1 */
+#define B3_MA_RCVAL_RX2	0x01c5	/*  8 bit	Recovery Value Rx Path MAC 1 */
+#define B3_MA_RCVAL_TX1	0x01c6	/*  8 bit	Recovery Value Tx Path MAC 2 */
+#define B3_MA_RCVAL_TX2	0x01c7	/*  8 bit	Recovery Value Tx Path MAC 2 */
+#define B3_MA_RC_CTRL	0x01c8	/* 16 bit	MAC Arbiter Recovery Ctrl Reg */
+#define B3_MA_RC_TEST	0x01ca	/* 16 bit	MAC Arbiter Recovery Test Reg */
+	/* 0x01cc - 0x01cf:	reserved */
+
+/* Packet Arbiter Registers (GENESIS only) */
+/* these are real timeouts */
+#define B3_PA_TOINI_RX1	0x01d0	/* 16 bit	Timeout Init Val Rx Path MAC 1 */
+	/* 0x01d2 - 0x01d3:	reserved */
+#define B3_PA_TOINI_RX2	0x01d4	/* 16 bit	Timeout Init Val Rx Path MAC 2 */
+	/* 0x01d6 - 0x01d7:	reserved */
+#define B3_PA_TOINI_TX1	0x01d8	/* 16 bit	Timeout Init Val Tx Path MAC 1 */
+	/* 0x01da - 0x01db:	reserved */
+#define B3_PA_TOINI_TX2	0x01dc	/* 16 bit	Timeout Init Val Tx Path MAC 2 */
+	/* 0x01de - 0x01df:	reserved */
+#define B3_PA_TOVAL_RX1	0x01e0	/* 16 bit	Timeout Val Rx Path MAC 1 */
+	/* 0x01e2 - 0x01e3:	reserved */
+#define B3_PA_TOVAL_RX2	0x01e4	/* 16 bit	Timeout Val Rx Path MAC 2 */
+	/* 0x01e6 - 0x01e7:	reserved */
+#define B3_PA_TOVAL_TX1	0x01e8	/* 16 bit	Timeout Val Tx Path MAC 1 */
+	/* 0x01ea - 0x01eb:	reserved */
+#define B3_PA_TOVAL_TX2	0x01ec	/* 16 bit	Timeout Val Tx Path MAC 2 */
+	/* 0x01ee - 0x01ef:	reserved */
+#define B3_PA_CTRL	0x01f0	/* 16 bit	Packet Arbiter Ctrl Register */
+#define B3_PA_TEST	0x01f2	/* 16 bit	Packet Arbiter Test Register */
+	/* 0x01f4 - 0x01ff:	reserved */
+
+/*
+ *	Bank 4 - 5
+ */
+/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
+#define TXA_ITI_INI		0x0200	/* 32 bit	Tx Arb Interval Timer Init Val*/
+#define TXA_ITI_VAL		0x0204	/* 32 bit	Tx Arb Interval Timer Value */
+#define TXA_LIM_INI		0x0208	/* 32 bit	Tx Arb Limit Counter Init Val */
+#define TXA_LIM_VAL		0x020c	/* 32 bit	Tx Arb Limit Counter Value */
+#define TXA_CTRL		0x0210	/*  8 bit	Tx Arbiter Control Register */
+#define TXA_TEST		0x0211	/*  8 bit	Tx Arbiter Test Register */
+#define TXA_STAT		0x0212	/*  8 bit	Tx Arbiter Status Register */
+	/* 0x0213 - 0x027f:	reserved */
+	/* 0x0280 - 0x0292:	MAC 2 */
+	/* 0x0213 - 0x027f:	reserved */
+
+/*
+ *	Bank 6
+ */
+/* External registers (GENESIS only) */
+#define B6_EXT_REG		0x0300
+
+/*
+ *	Bank 7
+ */
+/* This is a copy of the Configuration register file (lower half) */
+#define B7_CFG_SPC		0x0380
+
+/*
+ *	Bank 8 - 15
+ */
+/* Receive and Transmit Queue Registers, use Q_ADDR() to access */
+#define B8_Q_REGS		0x0400
+
+/* Queue Register Offsets, use Q_ADDR() to access */
+#define Q_D		0x00	/* 8*32	bit	Current Descriptor */
+#define Q_DA_L	0x20	/* 32 bit	Current Descriptor Address Low dWord */
+#define Q_DA_H	0x24	/* 32 bit	Current Descriptor Address High dWord */
+#define Q_AC_L	0x28	/* 32 bit	Current Address Counter Low dWord */
+#define Q_AC_H	0x2c	/* 32 bit	Current Address Counter High dWord */
+#define Q_BC	0x30	/* 32 bit	Current Byte Counter */
+#define Q_CSR	0x34	/* 32 bit	BMU Control/Status Register */
+#define Q_F		0x38	/* 32 bit	Flag Register */
+#define Q_T1	0x3c	/* 32 bit	Test Register 1 */
+#define Q_T1_TR	0x3c	/*  8 bit	Test Register 1 Transfer SM */
+#define Q_T1_WR	0x3d	/*  8 bit	Test Register 1 Write Descriptor SM */
+#define Q_T1_RD	0x3e	/*  8 bit	Test Register 1 Read Descriptor SM */
+#define Q_T1_SV	0x3f	/*  8 bit	Test Register 1 Supervisor SM */
+#define Q_T2	0x40	/* 32 bit	Test Register 2	*/
+#define Q_T3	0x44	/* 32 bit	Test Register 3	*/
+	/* 0x48 - 0x7f:	reserved */
+
+/*
+ *	Bank 16 - 23
+ */
+/* RAM Buffer Registers */
+#define B16_RAM_REGS	0x0800
+
+/* RAM Buffer Register Offsets, use RB_ADDR() to access */
+#define RB_START		0x00	/* 32 bit	RAM Buffer Start Address */
+#define RB_END			0x04	/* 32 bit	RAM Buffer End Address */
+#define RB_WP			0x08	/* 32 bit	RAM Buffer Write Pointer */
+#define RB_RP			0x0c	/* 32 bit	RAM Buffer Read Pointer */
+#define RB_RX_UTPP		0x10	/* 32 bit	Rx Upper Threshold, Pause Pack */
+#define RB_RX_LTPP		0x14	/* 32 bit	Rx Lower Threshold, Pause Pack */
+#define RB_RX_UTHP		0x18	/* 32 bit	Rx Upper Threshold, High Prio */
+#define RB_RX_LTHP		0x1c	/* 32 bit	Rx Lower Threshold, High Prio */
+	/* 0x10 - 0x1f:	reserved at Tx RAM Buffer Registers */
+#define RB_PC			0x20	/* 32 bit	RAM Buffer Packet Counter */
+#define RB_LEV			0x24	/* 32 bit	RAM Buffer Level Register */
+#define RB_CTRL			0x28	/*  8 bit	RAM Buffer Control Register */
+#define RB_TST1			0x29	/*  8 bit	RAM Buffer Test Register 1 */
+#define RB_TST2			0x2A	/*  8 bit	RAM Buffer Test Register 2 */
+	/* 0x2c - 0x7f:	reserved */
+
+/*
+ *	Bank 24
+ */
+/*
+ * Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only)
+ * use MR_ADDR() to access
+ */
+#define RX_MFF_EA		0x0c00	/* 32 bit	Receive MAC FIFO End Address */
+#define RX_MFF_WP		0x0c04	/* 32 bit 	Receive MAC FIFO Write Pointer */
+	/* 0x0c08 - 0x0c0b:	reserved */
+#define RX_MFF_RP		0x0c0c	/* 32 bit	Receive MAC FIFO Read Pointer */
+#define RX_MFF_PC		0x0c10	/* 32 bit	Receive MAC FIFO Packet Cnt */
+#define RX_MFF_LEV		0x0c14	/* 32 bit	Receive MAC FIFO Level */
+#define RX_MFF_CTRL1	0x0c18	/* 16 bit	Receive MAC FIFO Control Reg 1*/
+#define RX_MFF_STAT_TO	0x0c1a	/*  8 bit	Receive MAC Status Timeout */
+#define RX_MFF_TIST_TO	0x0c1b	/*  8 bit	Receive MAC Time Stamp Timeout */
+#define RX_MFF_CTRL2	0x0c1c	/*  8 bit	Receive MAC FIFO Control Reg 2*/
+#define RX_MFF_TST1		0x0c1d	/*  8 bit	Receive MAC FIFO Test Reg 1 */
+#define RX_MFF_TST2		0x0c1e	/*  8 bit	Receive MAC FIFO Test Reg 2 */
+	/* 0x0c1f:	reserved */
+#define RX_LED_INI		0x0c20	/* 32 bit	Receive LED Cnt Init Value */
+#define RX_LED_VAL		0x0c24	/* 32 bit	Receive LED Cnt Current Value */
+#define RX_LED_CTRL		0x0c28	/*  8 bit	Receive LED Cnt Control Reg */
+#define RX_LED_TST		0x0c29	/*  8 bit	Receive LED Cnt Test Register */
+	/* 0x0c2a - 0x0c2f:	reserved */
+#define LNK_SYNC_INI	0x0c30	/* 32 bit	Link Sync Cnt Init Value */
+#define LNK_SYNC_VAL	0x0c34	/* 32 bit	Link Sync Cnt Current Value */
+#define LNK_SYNC_CTRL	0x0c38	/*  8 bit	Link Sync Cnt Control Register */
+#define LNK_SYNC_TST	0x0c39	/*  8 bit	Link Sync Cnt Test Register */
+	/* 0x0c3a - 0x0c3b:	reserved */
+#define LNK_LED_REG		0x0c3c	/*  8 bit	Link LED Register */
+	/* 0x0c3d - 0x0c3f:	reserved */
+
+/* Receive GMAC FIFO (YUKON only), use MR_ADDR() to access */
+#define RX_GMF_EA		0x0c40	/* 32 bit	Rx GMAC FIFO End Address */
+#define RX_GMF_AF_THR	0x0c44	/* 32 bit	Rx GMAC FIFO Almost Full Thresh. */
+#define RX_GMF_CTRL_T	0x0c48	/* 32 bit	Rx GMAC FIFO Control/Test */
+#define RX_GMF_FL_MSK	0x0c4c	/* 32 bit	Rx GMAC FIFO Flush Mask */
+#define RX_GMF_FL_THR	0x0c50	/* 32 bit	Rx GMAC FIFO Flush Threshold */
+	/* 0x0c54 - 0x0c5f:	reserved */
+#define RX_GMF_WP		0x0c60	/* 32 bit 	Rx GMAC FIFO Write Pointer */
+	/* 0x0c64 - 0x0c67:	reserved */
+#define RX_GMF_WLEV		0x0c68	/* 32 bit 	Rx GMAC FIFO Write Level */
+	/* 0x0c6c - 0x0c6f:	reserved */
+#define RX_GMF_RP		0x0c70	/* 32 bit 	Rx GMAC FIFO Read Pointer */
+	/* 0x0c74 - 0x0c77:	reserved */
+#define RX_GMF_RLEV		0x0c78	/* 32 bit 	Rx GMAC FIFO Read Level */
+	/* 0x0c7c - 0x0c7f:	reserved */
+
+/*
+ *	Bank 25
+ */
+	/* 0x0c80 - 0x0cbf:	MAC 2 */
+	/* 0x0cc0 - 0x0cff:	reserved */
+
+/*
+ *	Bank 26
+ */
+/*
+ * Transmit MAC FIFO and Transmit LED Registers (GENESIS only),
+ * use MR_ADDR() to access
+ */
+#define TX_MFF_EA		0x0d00	/* 32 bit	Transmit MAC FIFO End Address */
+#define TX_MFF_WP		0x0d04	/* 32 bit 	Transmit MAC FIFO WR Pointer */
+#define TX_MFF_WSP		0x0d08	/* 32 bit	Transmit MAC FIFO WR Shadow Ptr */
+#define TX_MFF_RP		0x0d0c	/* 32 bit	Transmit MAC FIFO RD Pointer */
+#define TX_MFF_PC		0x0d10	/* 32 bit	Transmit MAC FIFO Packet Cnt */
+#define TX_MFF_LEV		0x0d14	/* 32 bit	Transmit MAC FIFO Level */
+#define TX_MFF_CTRL1	0x0d18	/* 16 bit	Transmit MAC FIFO Ctrl Reg 1 */
+#define TX_MFF_WAF		0x0d1a	/*  8 bit	Transmit MAC Wait after flush */
+	/* 0x0c1b:	reserved */
+#define TX_MFF_CTRL2	0x0d1c	/*  8 bit	Transmit MAC FIFO Ctrl Reg 2 */
+#define TX_MFF_TST1		0x0d1d	/*  8 bit	Transmit MAC FIFO Test Reg 1 */
+#define TX_MFF_TST2		0x0d1e	/*  8 bit	Transmit MAC FIFO Test Reg 2 */
+	/* 0x0d1f:	reserved */
+#define TX_LED_INI		0x0d20	/* 32 bit	Transmit LED Cnt Init Value */
+#define TX_LED_VAL		0x0d24	/* 32 bit	Transmit LED Cnt Current Val */
+#define TX_LED_CTRL		0x0d28	/*  8 bit	Transmit LED Cnt Control Reg */
+#define TX_LED_TST		0x0d29	/*  8 bit	Transmit LED Cnt Test Reg */
+	/* 0x0d2a - 0x0d3f:	reserved */
+
+/* Transmit GMAC FIFO (YUKON only), use MR_ADDR() to access */
+#define TX_GMF_EA		0x0d40	/* 32 bit	Tx GMAC FIFO End Address */
+#define TX_GMF_AE_THR	0x0d44	/* 32 bit	Tx GMAC FIFO Almost Empty Thresh.*/
+#define TX_GMF_CTRL_T	0x0d48	/* 32 bit	Tx GMAC FIFO Control/Test */
+	/* 0x0d4c - 0x0d5f:	reserved */
+#define TX_GMF_WP		0x0d60	/* 32 bit 	Tx GMAC FIFO Write Pointer */
+#define TX_GMF_WSP		0x0d64	/* 32 bit 	Tx GMAC FIFO Write Shadow Ptr. */
+#define TX_GMF_WLEV		0x0d68	/* 32 bit 	Tx GMAC FIFO Write Level */
+	/* 0x0d6c - 0x0d6f:	reserved */
+#define TX_GMF_RP		0x0d70	/* 32 bit 	Tx GMAC FIFO Read Pointer */
+#define TX_GMF_RSTP		0x0d74	/* 32 bit 	Tx GMAC FIFO Restart Pointer */
+#define TX_GMF_RLEV		0x0d78	/* 32 bit 	Tx GMAC FIFO Read Level */
+	/* 0x0d7c - 0x0d7f:	reserved */
+
+/*
+ *	Bank 27
+ */
+	/* 0x0d80 - 0x0dbf:	MAC 2 */
+	/* 0x0daa - 0x0dff:	reserved */
+
+/*
+ *	Bank 28
+ */
+/* Descriptor Poll Timer Registers */
+#define B28_DPT_INI		0x0e00	/* 24 bit	Descriptor Poll Timer Init Val */
+#define B28_DPT_VAL		0x0e04	/* 24 bit	Descriptor Poll Timer Curr Val */
+#define B28_DPT_CTRL	0x0e08	/*  8 bit	Descriptor Poll Timer Ctrl Reg */
+	/* 0x0e09:	reserved */
+#define B28_DPT_TST		0x0e0a	/*  8 bit	Descriptor Poll Timer Test Reg */
+	/* 0x0e0b:	reserved */
+
+/* Time Stamp Timer Registers (YUKON only) */
+	/* 0x0e10:	reserved */
+#define GMAC_TI_ST_VAL	0x0e14	/* 32 bit	Time Stamp Timer Curr Val */
+#define GMAC_TI_ST_CTRL	0x0e18	/*  8 bit	Time Stamp Timer Ctrl Reg */
+	/* 0x0e19:	reserved */
+#define GMAC_TI_ST_TST	0x0e1a	/*  8 bit	Time Stamp Timer Test Reg */
+	/* 0x0e1b - 0x0e7f:	reserved */
+
+/*
+ *	Bank 29
+ */
+	/* 0x0e80 - 0x0efc:	reserved */
+
+/*
+ *	Bank 30
+ */
+/* GMAC and GPHY Control Registers (YUKON only) */
+#define GMAC_CTRL		0x0f00	/* 32 bit	GMAC Control Reg */
+#define GPHY_CTRL		0x0f04	/* 32 bit	GPHY Control Reg */
+#define GMAC_IRQ_SRC	0x0f08	/*  8 bit	GMAC Interrupt Source Reg */
+	/* 0x0f09 - 0x0f0b:	reserved */
+#define GMAC_IRQ_MSK	0x0f0c	/*  8 bit	GMAC Interrupt Mask Reg */
+	/* 0x0f0d - 0x0f0f:	reserved */
+#define GMAC_LINK_CTRL	0x0f10	/* 16 bit	Link Control Reg */
+	/* 0x0f14 - 0x0f1f:	reserved */
+
+/* Wake-up Frame Pattern Match Control Registers (YUKON only) */
+
+#define WOL_REG_OFFS	0x20	/* HW-Bug: Address is + 0x20 against spec. */
+
+#define WOL_CTRL_STAT	0x0f20	/* 16 bit	WOL Control/Status Reg */
+#define WOL_MATCH_CTL	0x0f22	/*  8 bit	WOL Match Control Reg */
+#define WOL_MATCH_RES	0x0f23	/*  8 bit	WOL Match Result Reg */
+#define WOL_MAC_ADDR_LO	0x0f24	/* 32 bit	WOL MAC Address Low */
+#define WOL_MAC_ADDR_HI	0x0f28	/* 16 bit	WOL MAC Address High */
+#define WOL_PATT_RPTR	0x0f2c	/*  8 bit	WOL Pattern Read Ptr */
+
+/* use this macro to access above registers */
+#define WOL_REG(Reg)	((Reg) + (pAC->GIni.GIWolOffs))
+
+
+/* WOL Pattern Length Registers (YUKON only) */
+
+#define WOL_PATT_LEN_LO	0x0f30		/* 32 bit	WOL Pattern Length 3..0 */
+#define WOL_PATT_LEN_HI	0x0f34		/* 24 bit	WOL Pattern Length 6..4 */
+
+/* WOL Pattern Counter Registers (YUKON only) */
+
+#define WOL_PATT_CNT_0	0x0f38		/* 32 bit	WOL Pattern Counter 3..0 */
+#define WOL_PATT_CNT_4	0x0f3c		/* 24 bit	WOL Pattern Counter 6..4 */
+	/* 0x0f40 - 0x0f7f:	reserved */
+
+/*
+ *	Bank 31
+ */
+/* 0x0f80 - 0x0fff:	reserved */
+
+/*
+ *	Bank 32	- 33
+ */
+#define WOL_PATT_RAM_1	0x1000	/*  WOL Pattern RAM Link 1 */
+
+/*
+ *	Bank 0x22 - 0x3f
+ */
+/* 0x1100 - 0x1fff:	reserved */
+
+/*
+ *	Bank 0x40 - 0x4f
+ */
+#define BASE_XMAC_1		0x2000	/* XMAC 1 registers */
+
+/*
+ *	Bank 0x50 - 0x5f
+ */
+
+#define BASE_GMAC_1		0x2800	/* GMAC 1 registers */
+
+/*
+ *	Bank 0x60 - 0x6f
+ */
+#define BASE_XMAC_2		0x3000	/* XMAC 2 registers */
+
+/*
+ *	Bank 0x70 - 0x7f
+ */
+#define BASE_GMAC_2		0x3800	/* GMAC 2 registers */
+
+/*
+ *	Control Register Bit Definitions:
+ */
+/*	B0_RAP		8 bit	Register Address Port */
+								/* Bit 7:	reserved */
+#define RAP_RAP			0x3f	/* Bit 6..0:	0 = block 0,..,6f = block 6f */
+
+/*	B0_CTST		16 bit	Control/Status register */
+								/* Bit 15..14:	reserved */
+#define CS_CLK_RUN_HOT	BIT_13S		/* CLK_RUN hot m. (YUKON-Lite only) */
+#define CS_CLK_RUN_RST	BIT_12S		/* CLK_RUN reset  (YUKON-Lite only) */
+#define CS_CLK_RUN_ENA	BIT_11S		/* CLK_RUN enable (YUKON-Lite only) */
+#define CS_VAUX_AVAIL	BIT_10S		/* VAUX available (YUKON only) */
+#define CS_BUS_CLOCK	BIT_9S		/* Bus Clock 0/1 = 33/66 MHz */
+#define CS_BUS_SLOT_SZ	BIT_8S		/* Slot Size 0/1 = 32/64 bit slot */
+#define CS_ST_SW_IRQ	BIT_7S		/* Set IRQ SW Request */
+#define CS_CL_SW_IRQ	BIT_6S		/* Clear IRQ SW Request */
+#define CS_STOP_DONE	BIT_5S		/* Stop Master is finished */
+#define CS_STOP_MAST	BIT_4S		/* Command Bit to stop the master */
+#define CS_MRST_CLR		BIT_3S		/* Clear Master reset	*/
+#define CS_MRST_SET		BIT_2S		/* Set Master reset	*/
+#define CS_RST_CLR		BIT_1S		/* Clear Software reset	*/
+#define CS_RST_SET		BIT_0S		/* Set   Software reset	*/
+
+/*	B0_LED		 8 Bit	LED register */
+								/* Bit  7.. 2:	reserved */
+#define LED_STAT_ON		BIT_1S		/* Status LED on	*/
+#define LED_STAT_OFF	BIT_0S		/* Status LED off	*/
+
+/*	B0_POWER_CTRL	 8 Bit	Power Control reg (YUKON only) */
+#define PC_VAUX_ENA		BIT_7		/* Switch VAUX Enable  */
+#define PC_VAUX_DIS		BIT_6       /* Switch VAUX Disable */
+#define PC_VCC_ENA		BIT_5       /* Switch VCC Enable  */
+#define PC_VCC_DIS		BIT_4       /* Switch VCC Disable */
+#define PC_VAUX_ON		BIT_3       /* Switch VAUX On  */
+#define PC_VAUX_OFF		BIT_2       /* Switch VAUX Off */
+#define PC_VCC_ON		BIT_1       /* Switch VCC On  */
+#define PC_VCC_OFF		BIT_0       /* Switch VCC Off */
+
+/*	B0_ISRC		32 bit	Interrupt Source Register */
+/*	B0_IMSK		32 bit	Interrupt Mask Register */
+/*	B0_SP_ISRC	32 bit	Special Interrupt Source Reg */
+/*	B2_IRQM_MSK 	32 bit	IRQ Moderation Mask */
+#define IS_ALL_MSK		0xbfffffffL	/* 		All Interrupt bits */
+#define IS_HW_ERR		BIT_31		/* Interrupt HW Error */
+								/* Bit 30:	reserved */
+#define IS_PA_TO_RX1	BIT_29		/* Packet Arb Timeout Rx1 */
+#define IS_PA_TO_RX2	BIT_28		/* Packet Arb Timeout Rx2 */
+#define IS_PA_TO_TX1	BIT_27		/* Packet Arb Timeout Tx1 */
+#define IS_PA_TO_TX2	BIT_26		/* Packet Arb Timeout Tx2 */
+#define IS_I2C_READY	BIT_25		/* IRQ on end of I2C Tx */
+#define IS_IRQ_SW		BIT_24		/* SW forced IRQ	*/
+#define IS_EXT_REG		BIT_23		/* IRQ from LM80 or PHY (GENESIS only) */
+									/* IRQ from PHY (YUKON only) */
+#define IS_TIMINT		BIT_22		/* IRQ from Timer	*/
+#define IS_MAC1			BIT_21		/* IRQ from MAC 1	*/
+#define IS_LNK_SYNC_M1	BIT_20		/* Link Sync Cnt wrap MAC 1 */
+#define IS_MAC2			BIT_19		/* IRQ from MAC 2	*/
+#define IS_LNK_SYNC_M2	BIT_18		/* Link Sync Cnt wrap MAC 2 */
+/* Receive Queue 1 */
+#define IS_R1_B			BIT_17		/* Q_R1 End of Buffer */
+#define IS_R1_F			BIT_16		/* Q_R1 End of Frame */
+#define IS_R1_C			BIT_15		/* Q_R1 Encoding Error */
+/* Receive Queue 2 */
+#define IS_R2_B			BIT_14		/* Q_R2 End of Buffer */
+#define IS_R2_F			BIT_13		/* Q_R2 End of Frame */
+#define IS_R2_C			BIT_12		/* Q_R2 Encoding Error */
+/* Synchronous Transmit Queue 1 */
+#define IS_XS1_B		BIT_11		/* Q_XS1 End of Buffer */
+#define IS_XS1_F		BIT_10		/* Q_XS1 End of Frame */
+#define IS_XS1_C		BIT_9		/* Q_XS1 Encoding Error */
+/* Asynchronous Transmit Queue 1 */
+#define IS_XA1_B		BIT_8		/* Q_XA1 End of Buffer */
+#define IS_XA1_F		BIT_7		/* Q_XA1 End of Frame */
+#define IS_XA1_C		BIT_6		/* Q_XA1 Encoding Error */
+/* Synchronous Transmit Queue 2 */
+#define IS_XS2_B		BIT_5		/* Q_XS2 End of Buffer */
+#define IS_XS2_F		BIT_4		/* Q_XS2 End of Frame */
+#define IS_XS2_C		BIT_3		/* Q_XS2 Encoding Error */
+/* Asynchronous Transmit Queue 2 */
+#define IS_XA2_B		BIT_2		/* Q_XA2 End of Buffer */
+#define IS_XA2_F		BIT_1		/* Q_XA2 End of Frame */
+#define IS_XA2_C		BIT_0		/* Q_XA2 Encoding Error */
+
+
+/*	B0_HWE_ISRC	32 bit	HW Error Interrupt Src Reg */
+/*	B0_HWE_IMSK	32 bit	HW Error Interrupt Mask Reg */
+/*	B2_IRQM_HWE_MSK 32 bit	IRQ Moderation HW Error Mask */
+#define IS_ERR_MSK		0x00000fffL	/* 		All Error bits */
+								/* Bit 31..14:	reserved */
+#define IS_IRQ_TIST_OV	BIT_13	/* Time Stamp Timer Overflow (YUKON only) */
+#define IS_IRQ_SENSOR	BIT_12	/* IRQ from Sensor (YUKON only) */
+#define IS_IRQ_MST_ERR	BIT_11	/* IRQ master error detected */
+#define IS_IRQ_STAT		BIT_10	/* IRQ status exception */
+#define IS_NO_STAT_M1	BIT_9	/* No Rx Status from MAC 1 */
+#define IS_NO_STAT_M2	BIT_8	/* No Rx Status from MAC 2 */
+#define IS_NO_TIST_M1	BIT_7	/* No Time Stamp from MAC 1 */
+#define IS_NO_TIST_M2	BIT_6	/* No Time Stamp from MAC 2 */
+#define IS_RAM_RD_PAR	BIT_5	/* RAM Read  Parity Error */
+#define IS_RAM_WR_PAR	BIT_4	/* RAM Write Parity Error */
+#define IS_M1_PAR_ERR	BIT_3	/* MAC 1 Parity Error */
+#define IS_M2_PAR_ERR	BIT_2	/* MAC 2 Parity Error */
+#define IS_R1_PAR_ERR	BIT_1	/* Queue R1 Parity Error */
+#define IS_R2_PAR_ERR	BIT_0	/* Queue R2 Parity Error */
+
+/*	B2_CONN_TYP	 8 bit	Connector type */
+/*	B2_PMD_TYP	 8 bit	PMD type */
+/*	Values of connector and PMD type comply to SysKonnect internal std */
+
+/*	B2_MAC_CFG	 8 bit	MAC Configuration / Chip Revision */
+#define CFG_CHIP_R_MSK	(0xf<<4)	/* Bit 7.. 4: Chip Revision */
+									/* Bit 3.. 2:	reserved */
+#define CFG_DIS_M2_CLK	BIT_1S		/* Disable Clock for 2nd MAC */
+#define CFG_SNG_MAC		BIT_0S		/* MAC Config: 0=2 MACs / 1=1 MAC*/
+
+/*	B2_CHIP_ID	 8 bit 	Chip Identification Number */
+#define CHIP_ID_GENESIS	0x0a		/* Chip ID for GENESIS */
+#define CHIP_ID_YUKON	0xb0		/* Chip ID for YUKON */
+
+/*	B2_FAR		32 bit	Flash-Prom Addr Reg/Cnt */
+#define FAR_ADDR		0x1ffffL	/* Bit 16.. 0:	FPROM Address mask */
+
+/*	B2_LD_CRTL	 8 bit	EPROM loader control register */
+/*	Bits are currently reserved */
+
+/*	B2_LD_TEST	 8 bit	EPROM loader test register */
+								/* Bit 7.. 4:	reserved */
+#define LD_T_ON			BIT_3S	/* Loader Test mode on */
+#define LD_T_OFF		BIT_2S	/* Loader Test mode off */
+#define LD_T_STEP		BIT_1S	/* Decrement FPROM addr. Counter */
+#define LD_START		BIT_0S	/* Start loading FPROM */
+
+/*
+ *	Timer Section
+ */
+/*	B2_TI_CRTL	 8 bit	Timer control */
+/*	B2_IRQM_CTRL	 8 bit	IRQ Moderation Timer Control */
+								/* Bit 7.. 3:	reserved */
+#define TIM_START		BIT_2S	/* Start Timer */
+#define TIM_STOP		BIT_1S	/* Stop  Timer */
+#define TIM_CLR_IRQ		BIT_0S	/* Clear Timer IRQ (!IRQM) */
+
+/*	B2_TI_TEST	 8 Bit	Timer Test */
+/*	B2_IRQM_TEST	 8 bit	IRQ Moderation Timer Test */
+/*	B28_DPT_TST	 8 bit	Descriptor Poll Timer Test Reg */
+								/* Bit 7.. 3:	reserved */
+#define TIM_T_ON		BIT_2S	/* Test mode on */
+#define TIM_T_OFF		BIT_1S	/* Test mode off */
+#define TIM_T_STEP		BIT_0S	/* Test step */
+
+/*	B28_DPT_INI	32 bit	Descriptor Poll Timer Init Val */
+/*	B28_DPT_VAL	32 bit	Descriptor Poll Timer Curr Val */
+								/* Bit 31..24:	reserved */
+#define DPT_MSK		0x00ffffffL	/* Bit 23.. 0:	Desc Poll Timer Bits */
+
+/*	B28_DPT_CTRL	 8 bit	Descriptor Poll Timer Ctrl Reg */
+								/* Bit  7.. 2:	reserved */
+#define DPT_START		BIT_1S	/* Start Descriptor Poll Timer */
+#define DPT_STOP		BIT_0S	/* Stop  Descriptor Poll Timer */
+
+/*	B2_E_3			 8 bit 	lower 4 bits used for HW self test result */
+#define B2_E3_RES_MASK	0x0f
+
+/*	B2_TST_CTRL1	 8 bit	Test Control Register 1 */
+#define TST_FRC_DPERR_MR	BIT_7S	/* force DATAPERR on MST RD */
+#define TST_FRC_DPERR_MW	BIT_6S	/* force DATAPERR on MST WR */
+#define TST_FRC_DPERR_TR	BIT_5S	/* force DATAPERR on TRG RD */
+#define TST_FRC_DPERR_TW	BIT_4S	/* force DATAPERR on TRG WR */
+#define TST_FRC_APERR_M		BIT_3S	/* force ADDRPERR on MST */
+#define TST_FRC_APERR_T		BIT_2S	/* force ADDRPERR on TRG */
+#define TST_CFG_WRITE_ON	BIT_1S	/* Enable  Config Reg WR */
+#define TST_CFG_WRITE_OFF	BIT_0S	/* Disable Config Reg WR */
+
+/*	B2_TST_CTRL2	 8 bit	Test Control Register 2 */
+									/* Bit 7.. 4:	reserved */
+			/* force the following error on the next master read/write	*/
+#define TST_FRC_DPERR_MR64	BIT_3S	/* DataPERR RD 64	*/
+#define TST_FRC_DPERR_MW64	BIT_2S	/* DataPERR WR 64	*/
+#define TST_FRC_APERR_1M64	BIT_1S	/* AddrPERR on 1. phase */
+#define TST_FRC_APERR_2M64	BIT_0S	/* AddrPERR on 2. phase */
+
+/*	B2_GP_IO	32 bit	General Purpose I/O Register */
+							/* Bit 31..26:	reserved */
+#define GP_DIR_9	BIT_25	/* IO_9 direct, 0=I/1=O */
+#define GP_DIR_8	BIT_24	/* IO_8 direct, 0=I/1=O */
+#define GP_DIR_7	BIT_23	/* IO_7 direct, 0=I/1=O */
+#define GP_DIR_6	BIT_22	/* IO_6 direct, 0=I/1=O */
+#define GP_DIR_5	BIT_21	/* IO_5 direct, 0=I/1=O */
+#define GP_DIR_4	BIT_20	/* IO_4 direct, 0=I/1=O */
+#define GP_DIR_3	BIT_19	/* IO_3 direct, 0=I/1=O */
+#define GP_DIR_2	BIT_18	/* IO_2 direct, 0=I/1=O */
+#define GP_DIR_1	BIT_17	/* IO_1 direct, 0=I/1=O */
+#define GP_DIR_0	BIT_16	/* IO_0 direct, 0=I/1=O */
+						/* Bit 15..10:	reserved */
+#define GP_IO_9		BIT_9	/* IO_9 pin */
+#define GP_IO_8		BIT_8	/* IO_8 pin */
+#define GP_IO_7		BIT_7	/* IO_7 pin */
+#define GP_IO_6		BIT_6	/* IO_6 pin */
+#define GP_IO_5		BIT_5	/* IO_5 pin */
+#define GP_IO_4		BIT_4	/* IO_4 pin */
+#define GP_IO_3		BIT_3	/* IO_3 pin */
+#define GP_IO_2		BIT_2	/* IO_2 pin */
+#define GP_IO_1		BIT_1	/* IO_1 pin */
+#define GP_IO_0		BIT_0	/* IO_0 pin */
+
+/*	B2_I2C_CTRL	32 bit	I2C HW Control Register */
+#define I2C_FLAG		BIT_31		/* Start read/write if WR */
+#define I2C_ADDR		(0x7fffL<<16)	/* Bit 30..16:	Addr to be RD/WR */
+#define I2C_DEV_SEL		(0x7fL<<9)		/* Bit 15.. 9:	I2C Device Select */
+								/* Bit	8.. 5:	reserved	*/
+#define I2C_BURST_LEN	BIT_4		/* Burst Len, 1/4 bytes */
+#define I2C_DEV_SIZE	(7L<<1)		/* Bit	3.. 1:	I2C Device Size	*/
+#define I2C_025K_DEV	(0L<<1)		/*		0: 256 Bytes or smal. */
+#define I2C_05K_DEV		(1L<<1)		/* 		1: 512	Bytes	*/
+#define I2C_1K_DEV		(2L<<1)		/*		2: 1024 Bytes	*/
+#define I2C_2K_DEV		(3L<<1)		/*		3: 2048	Bytes	*/
+#define I2C_4K_DEV		(4L<<1)		/*		4: 4096 Bytes	*/
+#define I2C_8K_DEV		(5L<<1)		/*		5: 8192 Bytes	*/
+#define I2C_16K_DEV		(6L<<1)		/*		6: 16384 Bytes	*/
+#define I2C_32K_DEV		(7L<<1)		/*		7: 32768 Bytes	*/
+#define I2C_STOP		BIT_0		/* Interrupt I2C transfer */
+
+/*	B2_I2C_IRQ	32 bit	I2C HW IRQ Register */
+								/* Bit 31.. 1	reserved */
+#define I2C_CLR_IRQ		BIT_0	/* Clear I2C IRQ */
+
+/*	B2_I2C_SW	32 bit (8 bit access)	I2C HW SW Port Register */
+								/* Bit  7.. 3:	reserved */
+#define I2C_DATA_DIR	BIT_2S		/* direction of I2C_DATA */
+#define I2C_DATA		BIT_1S		/* I2C Data Port	*/
+#define I2C_CLK			BIT_0S		/* I2C Clock Port	*/
+
+/*
+ * I2C Address
+ */
+#define I2C_SENS_ADDR	LM80_ADDR	/* I2C Sensor Address, (Volt and Temp)*/
+
+
+/*	B2_BSC_CTRL	 8 bit	Blink Source Counter Control */
+							/* Bit  7.. 2:	reserved */
+#define BSC_START	BIT_1S		/* Start Blink Source Counter */
+#define BSC_STOP	BIT_0S		/* Stop  Blink Source Counter */
+
+/*	B2_BSC_STAT	 8 bit	Blink Source Counter Status */
+							/* Bit  7.. 1:	reserved */
+#define BSC_SRC		BIT_0S		/* Blink Source, 0=Off / 1=On */
+
+/*	B2_BSC_TST	16 bit	Blink Source Counter Test Reg */
+#define BSC_T_ON	BIT_2S		/* Test mode on */
+#define BSC_T_OFF	BIT_1S		/* Test mode off */
+#define BSC_T_STEP	BIT_0S		/* Test step */
+
+
+/*	B3_RAM_ADDR	32 bit	RAM Address, to read or write */
+					/* Bit 31..19:	reserved */
+#define RAM_ADR_RAN	0x0007ffffL	/* Bit 18.. 0:	RAM Address Range */
+
+/* RAM Interface Registers */
+/*	B3_RI_CTRL	16 bit	RAM Iface Control Register */
+								/* Bit 15..10:	reserved */
+#define RI_CLR_RD_PERR	BIT_9S	/* Clear IRQ RAM Read Parity Err */
+#define RI_CLR_WR_PERR	BIT_8S	/* Clear IRQ RAM Write Parity Err*/
+								/* Bit	7.. 2:	reserved */
+#define RI_RST_CLR		BIT_1S	/* Clear RAM Interface Reset */
+#define RI_RST_SET		BIT_0S	/* Set   RAM Interface Reset */
+
+/*	B3_RI_TEST	 8 bit	RAM Iface Test Register */
+								/* Bit 15.. 4:	reserved */
+#define RI_T_EV			BIT_3S	/* Timeout Event occured */
+#define RI_T_ON			BIT_2S	/* Timeout Timer Test On */
+#define RI_T_OFF		BIT_1S	/* Timeout Timer Test Off */
+#define RI_T_STEP		BIT_0S	/* Timeout Timer Step */
+
+/* MAC Arbiter Registers */
+/*	B3_MA_TO_CTRL	16 bit	MAC Arbiter Timeout Ctrl Reg */
+								/* Bit 15.. 4:	reserved */
+#define MA_FOE_ON		BIT_3S	/* XMAC Fast Output Enable ON */
+#define MA_FOE_OFF		BIT_2S	/* XMAC Fast Output Enable OFF */
+#define MA_RST_CLR		BIT_1S	/* Clear MAC Arbiter Reset */
+#define MA_RST_SET		BIT_0S	/* Set   MAC Arbiter Reset */
+
+/*	B3_MA_RC_CTRL	16 bit	MAC Arbiter Recovery Ctrl Reg */
+								/* Bit 15.. 8:	reserved */
+#define MA_ENA_REC_TX2	BIT_7S	/* Enable  Recovery Timer TX2 */
+#define MA_DIS_REC_TX2	BIT_6S	/* Disable Recovery Timer TX2 */
+#define MA_ENA_REC_TX1	BIT_5S	/* Enable  Recovery Timer TX1 */
+#define MA_DIS_REC_TX1	BIT_4S	/* Disable Recovery Timer TX1 */
+#define MA_ENA_REC_RX2	BIT_3S	/* Enable  Recovery Timer RX2 */
+#define MA_DIS_REC_RX2	BIT_2S	/* Disable Recovery Timer RX2 */
+#define MA_ENA_REC_RX1	BIT_1S	/* Enable  Recovery Timer RX1 */
+#define MA_DIS_REC_RX1	BIT_0S	/* Disable Recovery Timer RX1 */
+
+/* Packet Arbiter Registers */
+/*	B3_PA_CTRL	16 bit	Packet Arbiter Ctrl Register */
+								/* Bit 15..14:	reserved */
+#define PA_CLR_TO_TX2	BIT_13S	/* Clear IRQ Packet Timeout TX2 */
+#define PA_CLR_TO_TX1	BIT_12S	/* Clear IRQ Packet Timeout TX1 */
+#define PA_CLR_TO_RX2	BIT_11S	/* Clear IRQ Packet Timeout RX2 */
+#define PA_CLR_TO_RX1	BIT_10S	/* Clear IRQ Packet Timeout RX1 */
+#define PA_ENA_TO_TX2	BIT_9S	/* Enable  Timeout Timer TX2 */
+#define PA_DIS_TO_TX2	BIT_8S	/* Disable Timeout Timer TX2 */
+#define PA_ENA_TO_TX1	BIT_7S	/* Enable  Timeout Timer TX1 */
+#define PA_DIS_TO_TX1	BIT_6S	/* Disable Timeout Timer TX1 */
+#define PA_ENA_TO_RX2	BIT_5S	/* Enable  Timeout Timer RX2 */
+#define PA_DIS_TO_RX2	BIT_4S	/* Disable Timeout Timer RX2 */
+#define PA_ENA_TO_RX1	BIT_3S	/* Enable  Timeout Timer RX1 */
+#define PA_DIS_TO_RX1	BIT_2S	/* Disable Timeout Timer RX1 */
+#define PA_RST_CLR		BIT_1S	/* Clear MAC Arbiter Reset */
+#define PA_RST_SET		BIT_0S	/* Set   MAC Arbiter Reset */
+
+#define PA_ENA_TO_ALL	(PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\
+						PA_ENA_TO_TX1 | PA_ENA_TO_TX2)
+
+/* Rx/Tx Path related Arbiter Test Registers */
+/*	B3_MA_TO_TEST	16 bit	MAC Arbiter Timeout Test Reg */
+/*	B3_MA_RC_TEST	16 bit	MAC Arbiter Recovery Test Reg */
+/*	B3_PA_TEST	16 bit	Packet Arbiter Test Register */
+/*			Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */
+#define TX2_T_EV	BIT_15S		/* TX2 Timeout/Recv Event occured */
+#define TX2_T_ON	BIT_14S		/* TX2 Timeout/Recv Timer Test On */
+#define TX2_T_OFF	BIT_13S		/* TX2 Timeout/Recv Timer Tst Off */
+#define TX2_T_STEP	BIT_12S		/* TX2 Timeout/Recv Timer Step */
+#define TX1_T_EV	BIT_11S		/* TX1 Timeout/Recv Event occured */
+#define TX1_T_ON	BIT_10S		/* TX1 Timeout/Recv Timer Test On */
+#define TX1_T_OFF	BIT_9S		/* TX1 Timeout/Recv Timer Tst Off */
+#define TX1_T_STEP	BIT_8S		/* TX1 Timeout/Recv Timer Step */
+#define RX2_T_EV	BIT_7S		/* RX2 Timeout/Recv Event occured */
+#define RX2_T_ON	BIT_6S		/* RX2 Timeout/Recv Timer Test On */
+#define RX2_T_OFF	BIT_5S		/* RX2 Timeout/Recv Timer Tst Off */
+#define RX2_T_STEP	BIT_4S		/* RX2 Timeout/Recv Timer Step */
+#define RX1_T_EV	BIT_3S		/* RX1 Timeout/Recv Event occured */
+#define RX1_T_ON	BIT_2S		/* RX1 Timeout/Recv Timer Test On */
+#define RX1_T_OFF	BIT_1S		/* RX1 Timeout/Recv Timer Tst Off */
+#define RX1_T_STEP	BIT_0S		/* RX1 Timeout/Recv Timer Step */
+
+
+/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
+/*	TXA_ITI_INI	32 bit	Tx Arb Interval Timer Init Val */
+/*	TXA_ITI_VAL	32 bit	Tx Arb Interval Timer Value */
+/*	TXA_LIM_INI	32 bit	Tx Arb Limit Counter Init Val */
+/*	TXA_LIM_VAL	32 bit	Tx Arb Limit Counter Value */
+								/* Bit 31..24:	reserved */
+#define TXA_MAX_VAL	0x00ffffffL	/* Bit 23.. 0:	Max TXA Timer/Cnt Val */
+
+/*	TXA_CTRL	 8 bit	Tx Arbiter Control Register */
+#define TXA_ENA_FSYNC	BIT_7S	/* Enable  force of sync Tx queue */
+#define TXA_DIS_FSYNC	BIT_6S	/* Disable force of sync Tx queue */
+#define TXA_ENA_ALLOC	BIT_5S	/* Enable  alloc of free bandwidth */
+#define TXA_DIS_ALLOC	BIT_4S	/* Disable alloc of free bandwidth */
+#define TXA_START_RC	BIT_3S	/* Start sync Rate Control */
+#define TXA_STOP_RC		BIT_2S	/* Stop  sync Rate Control */
+#define TXA_ENA_ARB		BIT_1S	/* Enable  Tx Arbiter */
+#define TXA_DIS_ARB		BIT_0S	/* Disable Tx Arbiter */
+
+/*	TXA_TEST	 8 bit	Tx Arbiter Test Register */
+								/* Bit 7.. 6:	reserved */
+#define TXA_INT_T_ON	BIT_5S	/* Tx Arb Interval Timer Test On */
+#define TXA_INT_T_OFF	BIT_4S	/* Tx Arb Interval Timer Test Off */
+#define TXA_INT_T_STEP	BIT_3S	/* Tx Arb Interval Timer Step */
+#define TXA_LIM_T_ON	BIT_2S	/* Tx Arb Limit Timer Test On */
+#define TXA_LIM_T_OFF	BIT_1S	/* Tx Arb Limit Timer Test Off */
+#define TXA_LIM_T_STEP	BIT_0S	/* Tx Arb Limit Timer Step */
+
+/*	TXA_STAT	 8 bit	Tx Arbiter Status Register */
+								/* Bit 7.. 1:	reserved */
+#define TXA_PRIO_XS		BIT_0S	/* sync queue has prio to send */
+
+/*	Q_BC	32 bit	Current Byte Counter */
+								/* Bit 31..16:	reserved */
+#define BC_MAX			0xffff	/* Bit 15.. 0:	Byte counter */
+
+/* BMU Control Status Registers */
+/*	B0_R1_CSR	32 bit	BMU Ctrl/Stat Rx Queue 1 */
+/*	B0_R2_CSR	32 bit	BMU Ctrl/Stat Rx Queue 2 */
+/*	B0_XA1_CSR	32 bit	BMU Ctrl/Stat Sync Tx Queue 1 */
+/*	B0_XS1_CSR	32 bit	BMU Ctrl/Stat Async Tx Queue 1 */
+/*	B0_XA2_CSR	32 bit	BMU Ctrl/Stat Sync Tx Queue 2 */
+/*	B0_XS2_CSR	32 bit	BMU Ctrl/Stat Async Tx Queue 2 */
+/*	Q_CSR		32 bit	BMU Control/Status Register */
+								/* Bit 31..25:	reserved */
+#define CSR_SV_IDLE		BIT_24		/* BMU SM Idle */
+								/* Bit 23..22:	reserved */
+#define CSR_DESC_CLR	BIT_21		/* Clear Reset for Descr */
+#define CSR_DESC_SET	BIT_20		/* Set   Reset for Descr */
+#define CSR_FIFO_CLR	BIT_19		/* Clear Reset for FIFO */
+#define CSR_FIFO_SET	BIT_18		/* Set   Reset for FIFO */
+#define CSR_HPI_RUN		BIT_17		/* Release HPI SM */
+#define CSR_HPI_RST		BIT_16		/* Reset   HPI SM to Idle */
+#define CSR_SV_RUN		BIT_15		/* Release Supervisor SM */
+#define CSR_SV_RST		BIT_14		/* Reset   Supervisor SM */
+#define CSR_DREAD_RUN	BIT_13		/* Release Descr Read SM */
+#define CSR_DREAD_RST	BIT_12		/* Reset   Descr Read SM */
+#define CSR_DWRITE_RUN	BIT_11		/* Release Descr Write SM */
+#define CSR_DWRITE_RST	BIT_10		/* Reset   Descr Write SM */
+#define CSR_TRANS_RUN	BIT_9		/* Release Transfer SM */
+#define CSR_TRANS_RST	BIT_8		/* Reset   Transfer SM */
+#define CSR_ENA_POL		BIT_7		/* Enable  Descr Polling */
+#define CSR_DIS_POL		BIT_6		/* Disable Descr Polling */
+#define CSR_STOP		BIT_5		/* Stop  Rx/Tx Queue */
+#define CSR_START		BIT_4		/* Start Rx/Tx Queue */
+#define CSR_IRQ_CL_P	BIT_3		/* (Rx)	Clear Parity IRQ */
+#define CSR_IRQ_CL_B	BIT_2		/* Clear EOB IRQ */
+#define CSR_IRQ_CL_F	BIT_1		/* Clear EOF IRQ */
+#define CSR_IRQ_CL_C	BIT_0		/* Clear ERR IRQ */
+
+#define CSR_SET_RESET	(CSR_DESC_SET | CSR_FIFO_SET | CSR_HPI_RST |\
+						CSR_SV_RST | CSR_DREAD_RST | CSR_DWRITE_RST |\
+						CSR_TRANS_RST)
+#define CSR_CLR_RESET	(CSR_DESC_CLR | CSR_FIFO_CLR | CSR_HPI_RUN |\
+						CSR_SV_RUN | CSR_DREAD_RUN | CSR_DWRITE_RUN |\
+						CSR_TRANS_RUN)
+
+/*	Q_F	32 bit	Flag Register */
+									/* Bit 31..28:	reserved */
+#define F_ALM_FULL		BIT_27		/* Rx FIFO: almost full */
+#define F_EMPTY			BIT_27		/* Tx FIFO: empty flag */
+#define F_FIFO_EOF		BIT_26		/* Tag (EOF Flag) bit in FIFO */
+#define F_WM_REACHED	BIT_25		/* Watermark reached */
+									/* reserved */
+#define F_FIFO_LEVEL	(0x1fL<<16)	/* Bit 23..16:	# of Qwords in FIFO */
+									/* Bit 15..11: 	reserved */
+#define F_WATER_MARK	0x0007ffL	/* Bit 10.. 0:	Watermark */
+
+/*	Q_T1	32 bit	Test Register 1 */
+/*		Holds four State Machine control Bytes */
+#define SM_CRTL_SV_MSK	(0xffL<<24)	/* Bit 31..24:	Control Supervisor SM */
+#define SM_CRTL_RD_MSK	(0xffL<<16)	/* Bit 23..16:	Control Read Desc SM */
+#define SM_CRTL_WR_MSK	(0xffL<<8)	/* Bit 15.. 8:	Control Write Desc SM */
+#define SM_CRTL_TR_MSK	0xffL		/* Bit	7.. 0:	Control Transfer SM */
+
+/*	Q_T1_TR	 8 bit	Test Register 1 Transfer SM */
+/*	Q_T1_WR	 8 bit	Test Register 1 Write Descriptor SM */
+/*	Q_T1_RD	 8 bit	Test Register 1 Read Descriptor SM */
+/*	Q_T1_SV	 8 bit	Test Register 1 Supervisor SM */
+
+/* The control status byte of each machine looks like ... */
+#define SM_STATE		0xf0	/* Bit 7.. 4:	State which shall be loaded */
+#define SM_LOAD			BIT_3S	/* Load the SM with SM_STATE */
+#define SM_TEST_ON		BIT_2S	/* Switch on SM Test Mode */
+#define SM_TEST_OFF		BIT_1S	/* Go off the Test Mode */
+#define SM_STEP			BIT_0S	/* Step the State Machine */
+/* The encoding of the states is not supported by the Diagnostics Tool */
+
+/*	Q_T2	32 bit	Test Register 2	*/
+								/* Bit 31.. 8:	reserved */
+#define T2_AC_T_ON		BIT_7	/* Address Counter Test Mode on */
+#define T2_AC_T_OFF		BIT_6	/* Address Counter Test Mode off */
+#define T2_BC_T_ON		BIT_5	/* Byte Counter Test Mode on */
+#define T2_BC_T_OFF		BIT_4	/* Byte Counter Test Mode off */
+#define T2_STEP04		BIT_3	/* Inc AC/Dec BC by 4 */
+#define T2_STEP03		BIT_2	/* Inc AC/Dec BC by 3 */
+#define T2_STEP02		BIT_1	/* Inc AC/Dec BC by 2 */
+#define T2_STEP01		BIT_0	/* Inc AC/Dec BC by 1 */
+
+/*	Q_T3	32 bit	Test Register 3	*/
+								/* Bit 31.. 7:	reserved */
+#define T3_MUX_MSK		(7<<4)	/* Bit  6.. 4:	Mux Position */
+								/* Bit  3:	reserved */
+#define T3_VRAM_MSK		7		/* Bit  2.. 0:	Virtual RAM Buffer Address */
+
+/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */
+/*	RB_START	32 bit	RAM Buffer Start Address */
+/*	RB_END		32 bit	RAM Buffer End Address */
+/*	RB_WP		32 bit	RAM Buffer Write Pointer */
+/*	RB_RP		32 bit	RAM Buffer Read Pointer */
+/*	RB_RX_UTPP	32 bit	Rx Upper Threshold, Pause Pack */
+/*	RB_RX_LTPP	32 bit	Rx Lower Threshold, Pause Pack */
+/*	RB_RX_UTHP	32 bit	Rx Upper Threshold, High Prio */
+/*	RB_RX_LTHP	32 bit	Rx Lower Threshold, High Prio */
+/*	RB_PC		32 bit	RAM Buffer Packet Counter */
+/*	RB_LEV		32 bit	RAM Buffer Level Register */
+				/* Bit 31..19:	reserved */
+#define RB_MSK	0x0007ffff	/* Bit 18.. 0:	RAM Buffer Pointer Bits */
+
+/*	RB_TST2			 8 bit	RAM Buffer Test Register 2 */
+								/* Bit 7.. 4:	reserved */
+#define RB_PC_DEC		BIT_3S	/* Packet Counter Decrem */
+#define RB_PC_T_ON		BIT_2S	/* Packet Counter Test On */
+#define RB_PC_T_OFF		BIT_1S	/* Packet Counter Tst Off */
+#define RB_PC_INC		BIT_0S	/* Packet Counter Increm */
+
+/*	RB_TST1			 8 bit	RAM Buffer Test Register 1 */
+							/* Bit 7:	reserved */
+#define RB_WP_T_ON		BIT_6S	/* Write Pointer Test On */
+#define RB_WP_T_OFF		BIT_5S	/* Write Pointer Test Off */
+#define RB_WP_INC		BIT_4S	/* Write Pointer Increm */
+								/* Bit 3:	reserved */
+#define RB_RP_T_ON		BIT_2S	/* Read Pointer Test On */
+#define RB_RP_T_OFF		BIT_1S	/* Read Pointer Test Off */
+#define RB_RP_DEC		BIT_0S	/* Read Pointer Decrement */
+
+/*	RB_CTRL			 8 bit	RAM Buffer Control Register */
+								/* Bit 7.. 6:	reserved */
+#define RB_ENA_STFWD	BIT_5S	/* Enable  Store & Forward */
+#define RB_DIS_STFWD	BIT_4S	/* Disable Store & Forward */
+#define RB_ENA_OP_MD	BIT_3S	/* Enable  Operation Mode */
+#define RB_DIS_OP_MD	BIT_2S	/* Disable Operation Mode */
+#define RB_RST_CLR		BIT_1S	/* Clear RAM Buf STM Reset */
+#define RB_RST_SET		BIT_0S	/* Set   RAM Buf STM Reset */
+
+
+/* Receive and Transmit MAC FIFO Registers (GENESIS only) */
+
+/*	RX_MFF_EA	32 bit	Receive MAC FIFO End Address */
+/*	RX_MFF_WP	32 bit 	Receive MAC FIFO Write Pointer */
+/*	RX_MFF_RP	32 bit	Receive MAC FIFO Read Pointer */
+/*	RX_MFF_PC	32 bit	Receive MAC FIFO Packet Counter */
+/*	RX_MFF_LEV	32 bit	Receive MAC FIFO Level */
+/*	TX_MFF_EA	32 bit	Transmit MAC FIFO End Address */
+/*	TX_MFF_WP	32 bit 	Transmit MAC FIFO Write Pointer */
+/*	TX_MFF_WSP	32 bit	Transmit MAC FIFO WR Shadow Pointer */
+/*	TX_MFF_RP	32 bit	Transmit MAC FIFO Read Pointer */
+/*	TX_MFF_PC	32 bit	Transmit MAC FIFO Packet Cnt */
+/*	TX_MFF_LEV	32 bit	Transmit MAC FIFO Level */
+								/* Bit 31.. 6:	reserved */
+#define MFF_MSK			0x007fL	/* Bit	5.. 0:	MAC FIFO Address/Ptr Bits */
+
+/*	RX_MFF_CTRL1	16 bit	Receive MAC FIFO Control Reg 1 */
+								/* Bit 15..14:	reserved */
+#define MFF_ENA_RDY_PAT	BIT_13S		/* Enable  Ready Patch */
+#define MFF_DIS_RDY_PAT	BIT_12S		/* Disable Ready Patch */
+#define MFF_ENA_TIM_PAT	BIT_11S		/* Enable  Timing Patch */
+#define MFF_DIS_TIM_PAT	BIT_10S		/* Disable Timing Patch */
+#define MFF_ENA_ALM_FUL	BIT_9S		/* Enable  AlmostFull Sign */
+#define MFF_DIS_ALM_FUL	BIT_8S		/* Disable AlmostFull Sign */
+#define MFF_ENA_PAUSE	BIT_7S		/* Enable  Pause Signaling */
+#define MFF_DIS_PAUSE	BIT_6S		/* Disable Pause Signaling */
+#define MFF_ENA_FLUSH	BIT_5S		/* Enable  Frame Flushing */
+#define MFF_DIS_FLUSH	BIT_4S		/* Disable Frame Flushing */
+#define MFF_ENA_TIST	BIT_3S		/* Enable  Time Stamp Gener */
+#define MFF_DIS_TIST	BIT_2S		/* Disable Time Stamp Gener */
+#define MFF_CLR_INTIST	BIT_1S		/* Clear IRQ No Time Stamp */
+#define MFF_CLR_INSTAT	BIT_0S		/* Clear IRQ No Status */
+
+#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT
+
+/*	TX_MFF_CTRL1	16 bit	Transmit MAC FIFO Control Reg 1 */
+#define MFF_CLR_PERR	BIT_15S		/* Clear Parity Error IRQ */
+								/* Bit 14:	reserved */
+#define MFF_ENA_PKT_REC	BIT_13S		/* Enable  Packet Recovery */
+#define MFF_DIS_PKT_REC BIT_12S		/* Disable Packet Recovery */
+/*	MFF_ENA_TIM_PAT	 (see RX_MFF_CTRL1) Bit 11:	Enable  Timing Patch */
+/*	MFF_DIS_TIM_PAT	 (see RX_MFF_CTRL1) Bit 10:	Disable Timing Patch */
+/*	MFF_ENA_ALM_FUL	 (see RX_MFF_CTRL1) Bit	 9:	Enable  Almost Full Sign */
+/*	MFF_DIS_ALM_FUL	 (see RX_MFF_CTRL1) Bit	 8:	Disable Almost Full Sign */
+#define MFF_ENA_W4E		BIT_7S		/* Enable  Wait for Empty */
+#define MFF_DIS_W4E		BIT_6S		/* Disable Wait for Empty */
+/*	MFF_ENA_FLUSH	 (see RX_MFF_CTRL1) Bit	 5:	Enable  Frame Flushing */
+/*	MFF_DIS_FLUSH	 (see RX_MFF_CTRL1) Bit	 4:	Disable Frame Flushing */
+#define MFF_ENA_LOOPB	BIT_3S		/* Enable  Loopback */
+#define MFF_DIS_LOOPB	BIT_2S		/* Disable Loopback */
+#define MFF_CLR_MAC_RST	BIT_1S		/* Clear XMAC Reset */
+#define MFF_SET_MAC_RST	BIT_0S		/* Set   XMAC Reset */
+
+#define MFF_TX_CTRL_DEF	(MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH)
+
+/*	RX_MFF_TST2	 	 8 bit	Receive MAC FIFO Test Register 2 */
+/*	TX_MFF_TST2	 	 8 bit	Transmit MAC FIFO Test Register 2 */
+								/* Bit 7:	reserved */
+#define MFF_WSP_T_ON	BIT_6S	/* Tx: Write Shadow Ptr TestOn */
+#define MFF_WSP_T_OFF	BIT_5S	/* Tx: Write Shadow Ptr TstOff */
+#define MFF_WSP_INC		BIT_4S	/* Tx: Write Shadow Ptr Increment */
+#define MFF_PC_DEC		BIT_3S	/* Packet Counter Decrement */
+#define MFF_PC_T_ON		BIT_2S	/* Packet Counter Test On */
+#define MFF_PC_T_OFF	BIT_1S	/* Packet Counter Test Off */
+#define MFF_PC_INC		BIT_0S	/* Packet Counter Increment */
+
+/*	RX_MFF_TST1	 	 8 bit	Receive MAC FIFO Test Register 1 */
+/*	TX_MFF_TST1	 	 8 bit	Transmit MAC FIFO Test Register 1 */
+					/* Bit 7:	reserved */
+#define MFF_WP_T_ON		BIT_6S	/* Write Pointer Test On */
+#define MFF_WP_T_OFF	BIT_5S	/* Write Pointer Test Off */
+#define MFF_WP_INC		BIT_4S	/* Write Pointer Increm */
+							/* Bit 3:	reserved */
+#define MFF_RP_T_ON		BIT_2S	/* Read Pointer Test On */
+#define MFF_RP_T_OFF	BIT_1S	/* Read Pointer Test Off */
+#define MFF_RP_DEC		BIT_0S	/* Read Pointer Decrement */
+
+/*	RX_MFF_CTRL2	 8 bit	Receive MAC FIFO Control Reg 2 */
+/*	TX_MFF_CTRL2	 8 bit	Transmit MAC FIFO Control Reg 2 */
+								/* Bit 7..4:	reserved */
+#define MFF_ENA_OP_MD	BIT_3S	/* Enable  Operation Mode */
+#define MFF_DIS_OP_MD	BIT_2S	/* Disable Operation Mode */
+#define MFF_RST_CLR		BIT_1S	/* Clear MAC FIFO Reset */
+#define MFF_RST_SET		BIT_0S	/* Set   MAC FIFO Reset */
+
+
+/*	Link LED Counter Registers (GENESIS only) */
+
+/*	RX_LED_CTRL		 8 bit	Receive LED Cnt Control Reg */
+/*	TX_LED_CTRL		 8 bit	Transmit LED Cnt Control Reg */
+/*	LNK_SYNC_CTRL	 8 bit	Link Sync Cnt Control Register */
+							/* Bit 7.. 3:	reserved */
+#define LED_START		BIT_2S	/* Start Timer */
+#define LED_STOP		BIT_1S	/* Stop Timer */
+#define LED_STATE		BIT_0S	/* Rx/Tx: LED State, 1=LED on */
+#define LED_CLR_IRQ		BIT_0S	/* Lnk: 	Clear Link IRQ */
+
+/*	RX_LED_TST		 8 bit	Receive LED Cnt Test Register */
+/*	TX_LED_TST		 8 bit	Transmit LED Cnt Test Register */
+/*	LNK_SYNC_TST	 8 bit	Link Sync Cnt Test Register */
+							/* Bit 7.. 3:	reserved */
+#define LED_T_ON		BIT_2S	/* LED Counter Test mode On */
+#define LED_T_OFF		BIT_1S	/* LED Counter Test mode Off */
+#define LED_T_STEP		BIT_0S	/* LED Counter Step */
+
+/*	LNK_LED_REG	 	 8 bit	Link LED Register */
+								/* Bit 7.. 6:	reserved */
+#define LED_BLK_ON		BIT_5S	/* Link LED Blinking On */
+#define LED_BLK_OFF		BIT_4S	/* Link LED Blinking Off */
+#define LED_SYNC_ON		BIT_3S	/* Use Sync Wire to switch LED */
+#define LED_SYNC_OFF	BIT_2S	/* Disable Sync Wire Input */
+#define LED_ON			BIT_1S	/* switch LED on */
+#define LED_OFF			BIT_0S	/* switch LED off */
+
+/*	Receive and Transmit GMAC FIFO Registers (YUKON only) */
+
+/*	RX_GMF_EA		32 bit	Rx GMAC FIFO End Address */
+/*	RX_GMF_AF_THR	32 bit	Rx GMAC FIFO Almost Full Thresh. */
+/*	RX_GMF_WP		32 bit 	Rx GMAC FIFO Write Pointer */
+/*	RX_GMF_WLEV		32 bit 	Rx GMAC FIFO Write Level */
+/*	RX_GMF_RP		32 bit 	Rx GMAC FIFO Read Pointer */
+/*	RX_GMF_RLEV		32 bit 	Rx GMAC FIFO Read Level */
+/*	TX_GMF_EA		32 bit	Tx GMAC FIFO End Address */
+/*	TX_GMF_AE_THR	32 bit	Tx GMAC FIFO Almost Empty Thresh.*/
+/*	TX_GMF_WP		32 bit 	Tx GMAC FIFO Write Pointer */
+/*	TX_GMF_WSP		32 bit 	Tx GMAC FIFO Write Shadow Ptr. */
+/*	TX_GMF_WLEV		32 bit 	Tx GMAC FIFO Write Level */
+/*	TX_GMF_RP		32 bit 	Tx GMAC FIFO Read Pointer */
+/*	TX_GMF_RSTP		32 bit 	Tx GMAC FIFO Restart Pointer */
+/*	TX_GMF_RLEV		32 bit 	Tx GMAC FIFO Read Level */
+
+/*	RX_GMF_CTRL_T	32 bit	Rx GMAC FIFO Control/Test */
+						/* Bits 31..15:	reserved */
+#define GMF_WP_TST_ON	BIT_14		/* Write Pointer Test On */
+#define GMF_WP_TST_OFF	BIT_13		/* Write Pointer Test Off */
+#define GMF_WP_STEP		BIT_12		/* Write Pointer Step/Increment */
+						/* Bit 11:	reserved */
+#define GMF_RP_TST_ON	BIT_10		/* Read Pointer Test On */
+#define GMF_RP_TST_OFF	BIT_9		/* Read Pointer Test Off */
+#define GMF_RP_STEP		BIT_8		/* Read Pointer Step/Increment */
+#define GMF_RX_F_FL_ON	BIT_7		/* Rx FIFO Flush Mode On */
+#define GMF_RX_F_FL_OFF	BIT_6		/* Rx FIFO Flush Mode Off */
+#define GMF_CLI_RX_FO	BIT_5		/* Clear IRQ Rx FIFO Overrun */
+#define GMF_CLI_RX_FC	BIT_4		/* Clear IRQ Rx Frame Complete */
+#define GMF_OPER_ON		BIT_3		/* Operational Mode On */
+#define GMF_OPER_OFF	BIT_2		/* Operational Mode Off */
+#define GMF_RST_CLR		BIT_1		/* Clear GMAC FIFO Reset */
+#define GMF_RST_SET		BIT_0		/* Set   GMAC FIFO Reset */
+
+/*	TX_GMF_CTRL_T	32 bit	Tx GMAC FIFO Control/Test */
+						/* Bits 31..19:	reserved */
+#define GMF_WSP_TST_ON	BIT_18		/* Write Shadow Pointer Test On */
+#define GMF_WSP_TST_OFF	BIT_17		/* Write Shadow Pointer Test Off */
+#define GMF_WSP_STEP	BIT_16		/* Write Shadow Pointer Step/Increment */
+						/* Bits 15..7: same as for RX_GMF_CTRL_T */
+#define GMF_CLI_TX_FU	BIT_6		/* Clear IRQ Tx FIFO Underrun */
+#define GMF_CLI_TX_FC	BIT_5		/* Clear IRQ Tx Frame Complete */
+#define GMF_CLI_TX_PE	BIT_4		/* Clear IRQ Tx Parity Error */
+						/* Bits 3..0: same as for RX_GMF_CTRL_T */
+
+#define GMF_RX_CTRL_DEF		(GMF_OPER_ON | GMF_RX_F_FL_ON)
+#define GMF_TX_CTRL_DEF		GMF_OPER_ON
+
+#define RX_GMF_FL_THR_DEF	0x0a	/* Rx GMAC FIFO Flush Threshold default */
+
+/*	GMAC_TI_ST_CTRL		  8 bit	Time Stamp Timer Ctrl Reg (YUKON only) */
+								/* Bit 7.. 3:	reserved */
+#define GMT_ST_START	BIT_2S		/* Start Time Stamp Timer */
+#define GMT_ST_STOP		BIT_1S		/* Stop  Time Stamp Timer */
+#define GMT_ST_CLR_IRQ	BIT_0S		/* Clear Time Stamp Timer IRQ */
+
+/*	GMAC_CTRL		32 bit	GMAC Control Reg (YUKON only) */
+						/* Bits 31.. 8:	reserved */
+#define GMC_H_BURST_ON	BIT_7		/* Half Duplex Burst Mode On */
+#define GMC_H_BURST_OFF	BIT_6		/* Half Duplex Burst Mode Off */
+#define GMC_F_LOOPB_ON	BIT_5		/* FIFO Loopback On */
+#define GMC_F_LOOPB_OFF	BIT_4		/* FIFO Loopback Off */
+#define GMC_PAUSE_ON	BIT_3		/* Pause On */
+#define GMC_PAUSE_OFF	BIT_2		/* Pause Off */
+#define GMC_RST_CLR		BIT_1		/* Clear GMAC Reset */
+#define GMC_RST_SET		BIT_0		/* Set   GMAC Reset */
+
+/*	GPHY_CTRL		32 bit	GPHY Control Reg (YUKON only) */
+						/* Bits 31..29:	reserved */
+#define GPC_SEL_BDT		BIT_28	/* Select Bi-Dir. Transfer for MDC/MDIO */
+#define GPC_INT_POL_HI	BIT_27	/* IRQ Polarity is Active HIGH */
+#define GPC_75_OHM		BIT_26	/* Use 75 Ohm Termination instead of 50 */
+#define GPC_DIS_FC		BIT_25	/* Disable Automatic Fiber/Copper Detection */
+#define GPC_DIS_SLEEP	BIT_24	/* Disable Energy Detect */
+#define GPC_HWCFG_M_3	BIT_23	/* HWCFG_MODE[3] */
+#define GPC_HWCFG_M_2	BIT_22	/* HWCFG_MODE[2] */
+#define GPC_HWCFG_M_1	BIT_21	/* HWCFG_MODE[1] */
+#define GPC_HWCFG_M_0	BIT_20	/* HWCFG_MODE[0] */
+#define GPC_ANEG_0		BIT_19	/* ANEG[0] */
+#define GPC_ENA_XC		BIT_18	/* Enable MDI crossover */
+#define GPC_DIS_125		BIT_17	/* Disable 125 MHz clock */
+#define GPC_ANEG_3		BIT_16	/* ANEG[3] */
+#define GPC_ANEG_2		BIT_15	/* ANEG[2] */
+#define GPC_ANEG_1		BIT_14	/* ANEG[1] */
+#define GPC_ENA_PAUSE	BIT_13	/* Enable Pause (SYM_OR_REM) */
+#define GPC_PHYADDR_4	BIT_12	/* Bit 4 of Phy Addr */
+#define GPC_PHYADDR_3	BIT_11	/* Bit 3 of Phy Addr */
+#define GPC_PHYADDR_2	BIT_10	/* Bit 2 of Phy Addr */
+#define GPC_PHYADDR_1	BIT_9	/* Bit 1 of Phy Addr */
+#define GPC_PHYADDR_0	BIT_8	/* Bit 0 of Phy Addr */
+						/* Bits  7..2:	reserved */
+#define GPC_RST_CLR		BIT_1	/* Clear GPHY Reset */
+#define GPC_RST_SET		BIT_0	/* Set   GPHY Reset */
+
+#define GPC_HWCFG_GMII_COP	(GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | \
+							 GPC_HWCFG_M_1 | GPC_HWCFG_M_0)
+
+#define GPC_HWCFG_GMII_FIB	(				 GPC_HWCFG_M_2 | \
+							 GPC_HWCFG_M_1 | GPC_HWCFG_M_0)
+
+#define GPC_ANEG_ADV_ALL_M	(GPC_ANEG_3 | GPC_ANEG_2 | \
+							 GPC_ANEG_1 | GPC_ANEG_0)
+
+/* forced speed and duplex mode (don't mix with other ANEG bits) */
+#define GPC_FRC10MBIT_HALF	0
+#define GPC_FRC10MBIT_FULL	GPC_ANEG_0
+#define GPC_FRC100MBIT_HALF	GPC_ANEG_1
+#define GPC_FRC100MBIT_FULL	(GPC_ANEG_0 | GPC_ANEG_1)
+
+/* auto-negotiation with limited advertised speeds */
+/* mix only with master/slave settings (for copper) */
+#define GPC_ADV_1000_HALF	GPC_ANEG_2
+#define GPC_ADV_1000_FULL	GPC_ANEG_3
+#define GPC_ADV_ALL			(GPC_ANEG_2 | GPC_ANEG_3)
+
+/* master/slave settings */
+/* only for copper with 1000 Mbps */
+#define GPC_FORCE_MASTER	0
+#define GPC_FORCE_SLAVE		GPC_ANEG_0
+#define GPC_PREF_MASTER		GPC_ANEG_1
+#define GPC_PREF_SLAVE		(GPC_ANEG_1 | GPC_ANEG_0)
+
+/*	GMAC_IRQ_SRC	 8 bit	GMAC Interrupt Source Reg (YUKON only) */
+/*	GMAC_IRQ_MSK	 8 bit	GMAC Interrupt Mask   Reg (YUKON only) */
+#define GM_IS_TX_CO_OV	BIT_5		/* Transmit Counter Overflow IRQ */
+#define GM_IS_RX_CO_OV	BIT_4		/* Receive Counter Overflow IRQ */
+#define GM_IS_TX_FF_UR	BIT_3		/* Transmit FIFO Underrun */
+#define GM_IS_TX_COMPL	BIT_2		/* Frame Transmission Complete */
+#define GM_IS_RX_FF_OR	BIT_1		/* Receive FIFO Overrun */
+#define GM_IS_RX_COMPL	BIT_0		/* Frame Reception Complete */
+
+#define GMAC_DEF_MSK	(GM_IS_TX_CO_OV | GM_IS_RX_CO_OV | \
+						GM_IS_TX_FF_UR)
+
+/*	GMAC_LINK_CTRL		16 bit	GMAC Link Control Reg (YUKON only) */
+						/* Bits 15.. 2:	reserved */
+#define GMLC_RST_CLR	BIT_1S		/* Clear GMAC Link Reset */
+#define GMLC_RST_SET	BIT_0S		/* Set   GMAC Link Reset */
+
+
+/*	WOL_CTRL_STAT		16 bit	WOL Control/Status Reg */
+#define WOL_CTL_LINK_CHG_OCC			BIT_15S
+#define WOL_CTL_MAGIC_PKT_OCC			BIT_14S
+#define WOL_CTL_PATTERN_OCC				BIT_13S
+
+#define WOL_CTL_CLEAR_RESULT			BIT_12S
+
+#define WOL_CTL_ENA_PME_ON_LINK_CHG		BIT_11S
+#define WOL_CTL_DIS_PME_ON_LINK_CHG		BIT_10S
+#define WOL_CTL_ENA_PME_ON_MAGIC_PKT	BIT_9S
+#define WOL_CTL_DIS_PME_ON_MAGIC_PKT	BIT_8S
+#define WOL_CTL_ENA_PME_ON_PATTERN		BIT_7S
+#define WOL_CTL_DIS_PME_ON_PATTERN		BIT_6S
+
+#define WOL_CTL_ENA_LINK_CHG_UNIT		BIT_5S
+#define WOL_CTL_DIS_LINK_CHG_UNIT		BIT_4S
+#define WOL_CTL_ENA_MAGIC_PKT_UNIT		BIT_3S
+#define WOL_CTL_DIS_MAGIC_PKT_UNIT		BIT_2S
+#define WOL_CTL_ENA_PATTERN_UNIT		BIT_1S
+#define WOL_CTL_DIS_PATTERN_UNIT		BIT_0S
+
+#define WOL_CTL_DEFAULT				\
+	(WOL_CTL_DIS_PME_ON_LINK_CHG |	\
+	WOL_CTL_DIS_PME_ON_PATTERN |	\
+	WOL_CTL_DIS_PME_ON_MAGIC_PKT |	\
+	WOL_CTL_DIS_LINK_CHG_UNIT |		\
+	WOL_CTL_DIS_PATTERN_UNIT |		\
+	WOL_CTL_DIS_MAGIC_PKT_UNIT)
+
+/*	WOL_MATCH_CTL		 8 bit	WOL Match Control Reg */
+#define WOL_CTL_PATT_ENA(x)				(BIT_0 << (x))
+
+#define SK_NUM_WOL_PATTERN		7
+#define SK_PATTERN_PER_WORD		4
+#define SK_BITMASK_PATTERN		7
+#define SK_POW_PATTERN_LENGTH	128
+
+#define WOL_LENGTH_MSK		0x7f
+#define WOL_LENGTH_SHIFT	8
+
+
+/* Receive and Transmit Descriptors ******************************************/
+
+/* Transmit Descriptor struct */
+typedef	struct s_HwTxd {
+	SK_U32 volatile	TxCtrl;	/* Transmit Buffer Control Field */
+	SK_U32	TxNext;			/* Physical Address Pointer to the next TxD */
+	SK_U32	TxAdrLo;		/* Physical Tx Buffer Address lower dword */
+	SK_U32	TxAdrHi;		/* Physical Tx Buffer Address upper dword */
+	SK_U32	TxStat;			/* Transmit Frame Status Word */
+#ifndef	SK_USE_REV_DESC
+	SK_U16	TxTcpOffs;		/* TCP Checksum Calculation Start Value */
+	SK_U16	TxRes1;			/* 16 bit reserved field */
+	SK_U16	TxTcpWp;		/* TCP Checksum Write Position */
+	SK_U16	TxTcpSp;		/* TCP Checksum Calculation Start Position */
+#else	/* SK_USE_REV_DESC */
+	SK_U16	TxRes1;			/* 16 bit reserved field */
+	SK_U16	TxTcpOffs;		/* TCP Checksum Calculation Start Value */
+	SK_U16	TxTcpSp;		/* TCP Checksum Calculation Start Position */
+	SK_U16	TxTcpWp;		/* TCP Checksum Write Position */
+#endif	/* SK_USE_REV_DESC */
+	SK_U32  TxRes2;			/* 32 bit reserved field */
+} SK_HWTXD;
+
+/* Receive Descriptor struct */
+typedef	struct s_HwRxd {
+	SK_U32 volatile RxCtrl;	/* Receive Buffer Control Field */
+	SK_U32	RxNext;			/* Physical Address Pointer to the next RxD */
+	SK_U32	RxAdrLo;		/* Physical Rx Buffer Address lower dword */
+	SK_U32	RxAdrHi;		/* Physical Rx Buffer Address upper dword */
+	SK_U32	RxStat;			/* Receive Frame Status Word */
+	SK_U32	RxTiSt;			/* Receive Time Stamp (from XMAC on GENESIS) */
+#ifndef	SK_USE_REV_DESC
+	SK_U16	RxTcpSum1;		/* TCP Checksum 1 */
+	SK_U16	RxTcpSum2;		/* TCP Checksum 2 */
+	SK_U16	RxTcpSp1;		/* TCP Checksum Calculation Start Position 1 */
+	SK_U16	RxTcpSp2;		/* TCP Checksum Calculation Start Position 2 */
+#else	/* SK_USE_REV_DESC */
+	SK_U16	RxTcpSum2;		/* TCP Checksum 2 */
+	SK_U16	RxTcpSum1;		/* TCP Checksum 1 */
+	SK_U16	RxTcpSp2;		/* TCP Checksum Calculation Start Position 2 */
+	SK_U16	RxTcpSp1;		/* TCP Checksum Calculation Start Position 1 */
+#endif	/* SK_USE_REV_DESC */
+} SK_HWRXD;
+
+/*
+ * Drivers which use the reverse descriptor feature (PCI_OUR_REG_2)
+ * should set the define SK_USE_REV_DESC.
+ * Structures are 'normaly' not endianess dependent. But in
+ * this case the SK_U16 fields are bound to bit positions inside the
+ * descriptor. RxTcpSum1 e.g. must start at bit 0 within the 6.th DWord.
+ * The bit positions inside a DWord are of course endianess dependent and
+ * swaps if the DWord is swapped by the hardware.
+ */
+
+
+/* Descriptor Bit Definition */
+/*	TxCtrl		Transmit Buffer Control Field */
+/*	RxCtrl		Receive  Buffer Control Field */
+#define BMU_OWN			BIT_31	/* OWN bit: 0=host/1=BMU */
+#define BMU_STF			BIT_30	/* Start of Frame */
+#define BMU_EOF			BIT_29	/* End of Frame */
+#define BMU_IRQ_EOB		BIT_28	/* Req "End of Buffer" IRQ */
+#define BMU_IRQ_EOF		BIT_27	/* Req "End of Frame" IRQ */
+/* TxCtrl specific bits */
+#define BMU_STFWD		BIT_26	/* (Tx)	Store & Forward Frame */
+#define BMU_NO_FCS		BIT_25	/* (Tx) Disable MAC FCS (CRC) generation */
+#define BMU_SW			BIT_24	/* (Tx)	1 bit res. for SW use */
+/* RxCtrl specific bits */
+#define BMU_DEV_0		BIT_26	/* (Rx)	Transfer data to Dev0 */
+#define BMU_STAT_VAL	BIT_25	/* (Rx)	Rx Status Valid */
+#define BMU_TIST_VAL	BIT_24	/* (Rx)	Rx TimeStamp Valid */
+								/* Bit 23..16:	BMU Check Opcodes */
+#define BMU_CHECK		(0x55L<<16)	/* Default BMU check */
+#define BMU_TCP_CHECK	(0x56L<<16)	/* Descr with TCP ext */
+#define BMU_UDP_CHECK	(0x57L<<16)	/* Descr with UDP ext (YUKON only) */
+#define BMU_BBC			0xFFFFL	/* Bit 15.. 0:	Buffer Byte Counter */
+
+/*	TxStat		Transmit Frame Status Word */
+/*	RxStat		Receive Frame Status Word */
+/*
+ *Note: TxStat is reserved for ASIC loopback mode only
+ *
+ *	The Bits of the Status words are defined in xmac_ii.h
+ *	(see XMR_FS bits)
+ */
+
+/* other defines *************************************************************/
+
+/*
+ * FlashProm specification
+ */
+#define MAX_PAGES	0x20000L	/* Every byte has a single page */
+#define MAX_FADDR	1			/* 1 byte per page */
+#define SKFDDI_PSZ	8			/* address PROM size */
+
+/* macros ********************************************************************/
+
+/*
+ * Receive and Transmit Queues
+ */
+#define Q_R1	0x0000		/* Receive Queue 1 */
+#define Q_R2	0x0080		/* Receive Queue 2 */
+#define Q_XS1	0x0200		/* Synchronous Transmit Queue 1 */
+#define Q_XA1	0x0280		/* Asynchronous Transmit Queue 1 */
+#define Q_XS2	0x0300		/* Synchronous Transmit Queue 2 */
+#define Q_XA2	0x0380		/* Asynchronous Transmit Queue 2 */
+
+/*
+ *	Macro Q_ADDR()
+ *
+ *	Use this macro to access the Receive and Transmit Queue Registers.
+ *
+ * para:
+ *	Queue	Queue to access.
+ *				Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
+ *	Offs	Queue register offset.
+ *				Values: Q_D, Q_DA_L ... Q_T2, Q_T3
+ *
+ * usage	SK_IN32(pAC, Q_ADDR(Q_R2, Q_BC), pVal)
+ */
+#define Q_ADDR(Queue, Offs)	(B8_Q_REGS + (Queue) + (Offs))
+
+/*
+ *	Macro RB_ADDR()
+ *
+ *	Use this macro to access the RAM Buffer Registers.
+ *
+ * para:
+ *	Queue	Queue to access.
+ *				Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
+ *	Offs	Queue register offset.
+ *				Values: RB_START, RB_END ... RB_LEV, RB_CTRL
+ *
+ * usage	SK_IN32(pAC, RB_ADDR(Q_R2, RB_RP), pVal)
+ */
+#define RB_ADDR(Queue, Offs)	(B16_RAM_REGS + (Queue) + (Offs))
+
+
+/*
+ * MAC Related Registers
+ */
+#define MAC_1		0	/* belongs to the port near the slot */
+#define MAC_2		1	/* belongs to the port far away from the slot */
+
+/*
+ *	Macro MR_ADDR()
+ *
+ *	Use this macro to access a MAC Related Registers inside the ASIC.
+ *
+ * para:
+ *	Mac		MAC to access.
+ *				Values: MAC_1, MAC_2
+ *	Offs	MAC register offset.
+ *				Values: RX_MFF_EA, RX_MFF_WP ... LNK_LED_REG,
+ *						TX_MFF_EA, TX_MFF_WP ... TX_LED_TST
+ *
+ * usage	SK_IN32(pAC, MR_ADDR(MAC_1, TX_MFF_EA), pVal)
+ */
+#define MR_ADDR(Mac, Offs)	(((Mac) << 7) + (Offs))
+
+#ifdef	SK_LITTLE_ENDIAN
+#define XM_WORD_LO	0
+#define XM_WORD_HI	1
+#else	/* !SK_LITTLE_ENDIAN */
+#define XM_WORD_LO	1
+#define XM_WORD_HI	0
+#endif	/* !SK_LITTLE_ENDIAN */
+
+
+/*
+ * macros to access the XMAC (GENESIS only)
+ *
+ * XM_IN16(),		to read a 16 bit register (e.g. XM_MMU_CMD)
+ * XM_OUT16(),		to write a 16 bit register (e.g. XM_MMU_CMD)
+ * XM_IN32(),		to read a 32 bit register (e.g. XM_TX_EV_CNT)
+ * XM_OUT32(),		to write a 32 bit register (e.g. XM_TX_EV_CNT)
+ * XM_INADDR(),		to read a network address register (e.g. XM_SRC_CHK)
+ * XM_OUTADDR(),	to write a network address register (e.g. XM_SRC_CHK)
+ * XM_INHASH(),		to read the XM_HSM_CHK register
+ * XM_OUTHASH()		to write the XM_HSM_CHK register
+ *
+ * para:
+ *	Mac		XMAC to access		values: MAC_1 or MAC_2
+ *	IoC		I/O context needed for SK I/O macros
+ *	Reg		XMAC Register to read or write
+ *	(p)Val	Value or pointer to the value which should be read or written
+ *
+ * usage:	XM_OUT16(IoC, MAC_1, XM_MMU_CMD, Value);
+ */
+
+#define XMA(Mac, Reg)									\
+	((BASE_XMAC_1 + (Mac) * (BASE_XMAC_2 - BASE_XMAC_1)) | ((Reg) << 1))
+
+#define XM_IN16(IoC, Mac, Reg, pVal)					\
+	SK_IN16((IoC), XMA((Mac), (Reg)), (pVal))
+
+#define XM_OUT16(IoC, Mac, Reg, Val)					\
+	SK_OUT16((IoC), XMA((Mac), (Reg)), (Val))
+
+#define XM_IN32(IoC, Mac, Reg, pVal) {					\
+	SK_IN16((IoC), XMA((Mac), (Reg)),					\
+		(SK_U16 *)&((SK_U16 *)(pVal))[XM_WORD_LO]);		\
+	SK_IN16((IoC), XMA((Mac), (Reg+2)),					\
+		(SK_U16 *)&((SK_U16 *)(pVal))[XM_WORD_HI]);		\
+}
+
+#define XM_OUT32(IoC, Mac, Reg, Val) {										\
+	SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL));			\
+	SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)(((Val) >> 16) & 0xffffL));\
+}
+
+/* Remember: we are always writing to / reading from LITTLE ENDIAN memory */
+
+#define XM_INADDR(IoC, Mac, Reg, pVal) {				\
+	SK_U16	Word;										\
+	SK_U8	*pByte;										\
+	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
+	SK_IN16((IoC), XMA((Mac), (Reg)), &Word);			\
+	pByte[0] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[1] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word);			\
+	pByte[2] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[3] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word);			\
+	pByte[4] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[5] = (SK_U8)((Word >> 8) & 0x00ff);			\
+}
+
+#define XM_OUTADDR(IoC, Mac, Reg, pVal) {				\
+	SK_U8	*pByte;										\
+	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
+	SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)			\
+		(((SK_U16)(pByte[0]) & 0x00ff) |				\
+		(((SK_U16)(pByte[1]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)		\
+		(((SK_U16)(pByte[2]) & 0x00ff) |				\
+		(((SK_U16)(pByte[3]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16)		\
+		(((SK_U16)(pByte[4]) & 0x00ff) |				\
+		(((SK_U16)(pByte[5]) << 8) & 0xff00)));			\
+}
+
+#define XM_INHASH(IoC, Mac, Reg, pVal) {				\
+	SK_U16	Word;										\
+	SK_U8	*pByte;										\
+	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
+	SK_IN16((IoC), XMA((Mac), (Reg)), &Word);			\
+	pByte[0] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[1] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word);			\
+	pByte[2] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[3] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word);			\
+	pByte[4] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[5] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), XMA((Mac), (Reg+6)), &Word);			\
+	pByte[6] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[7] = (SK_U8)((Word >> 8) & 0x00ff);			\
+}
+
+#define XM_OUTHASH(IoC, Mac, Reg, pVal) {				\
+	SK_U8	*pByte;										\
+	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
+	SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)			\
+		(((SK_U16)(pByte[0]) & 0x00ff)|					\
+		(((SK_U16)(pByte[1]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)		\
+		(((SK_U16)(pByte[2]) & 0x00ff)|					\
+		(((SK_U16)(pByte[3]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16)		\
+		(((SK_U16)(pByte[4]) & 0x00ff)|					\
+		(((SK_U16)(pByte[5]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), XMA((Mac), (Reg+6)), (SK_U16)		\
+		(((SK_U16)(pByte[6]) & 0x00ff)|					\
+		(((SK_U16)(pByte[7]) << 8) & 0xff00)));			\
+}
+
+/*
+ * macros to access the GMAC (YUKON only)
+ *
+ * GM_IN16(),		to read  a 16 bit register (e.g. GM_GP_STAT)
+ * GM_OUT16(),		to write a 16 bit register (e.g. GM_GP_CTRL)
+ * GM_IN32(),		to read  a 32 bit register (e.g. GM_)
+ * GM_OUT32(),		to write a 32 bit register (e.g. GM_)
+ * GM_INADDR(),		to read  a network address register (e.g. GM_SRC_ADDR_1L)
+ * GM_OUTADDR(),	to write a network address register (e.g. GM_SRC_ADDR_2L)
+ * GM_INHASH(),		to read  the GM_MC_ADDR_H1 register
+ * GM_OUTHASH()		to write the GM_MC_ADDR_H1 register
+ *
+ * para:
+ *	Mac		GMAC to access		values: MAC_1 or MAC_2
+ *	IoC		I/O context needed for SK I/O macros
+ *	Reg		GMAC Register to read or write
+ *	(p)Val	Value or pointer to the value which should be read or written
+ *
+ * usage:	GM_OUT16(IoC, MAC_1, GM_GP_CTRL, Value);
+ */
+
+#define GMA(Mac, Reg)									\
+	((BASE_GMAC_1 + (Mac) * (BASE_GMAC_2 - BASE_GMAC_1)) | (Reg))
+
+#define GM_IN16(IoC, Mac, Reg, pVal)					\
+	SK_IN16((IoC), GMA((Mac), (Reg)), (pVal))
+
+#define GM_OUT16(IoC, Mac, Reg, Val)					\
+	SK_OUT16((IoC), GMA((Mac), (Reg)), (Val))
+
+#define GM_IN32(IoC, Mac, Reg, pVal) {					\
+	SK_IN16((IoC), GMA((Mac), (Reg)),					\
+		(SK_U16 *)&((SK_U16 *)(pVal))[XM_WORD_LO]);		\
+	SK_IN16((IoC), GMA((Mac), (Reg+4)),					\
+		(SK_U16 *)&((SK_U16 *)(pVal))[XM_WORD_HI]);		\
+}
+
+#define GM_OUT32(IoC, Mac, Reg, Val) {										\
+	SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL));			\
+	SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)(((Val) >> 16) & 0xffffL));\
+}
+
+#define GM_INADDR(IoC, Mac, Reg, pVal) {				\
+	SK_U16	Word;										\
+	SK_U8	*pByte;										\
+	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
+	SK_IN16((IoC), GMA((Mac), (Reg)), &Word);			\
+	pByte[0] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[1] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word);			\
+	pByte[2] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[3] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word);			\
+	pByte[4] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[5] = (SK_U8)((Word >> 8) & 0x00ff);			\
+}
+
+#define GM_OUTADDR(IoC, Mac, Reg, pVal) {				\
+	SK_U8	*pByte;										\
+	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
+	SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)			\
+		(((SK_U16)(pByte[0]) & 0x00ff) |				\
+		(((SK_U16)(pByte[1]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)		\
+		(((SK_U16)(pByte[2]) & 0x00ff) |				\
+		(((SK_U16)(pByte[3]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16)		\
+		(((SK_U16)(pByte[4]) & 0x00ff) |				\
+		(((SK_U16)(pByte[5]) << 8) & 0xff00)));			\
+}
+
+#define GM_INHASH(IoC, Mac, Reg, pVal) {				\
+	SK_U16	Word;										\
+	SK_U8	*pByte;										\
+	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
+	SK_IN16((IoC), GMA((Mac), (Reg)), &Word);			\
+	pByte[0] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[1] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word);			\
+	pByte[2] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[3] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word);			\
+	pByte[4] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[5] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), GMA((Mac), (Reg+12)), &Word);		\
+	pByte[6] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[7] = (SK_U8)((Word >> 8) & 0x00ff);			\
+}
+
+#define GM_OUTHASH(IoC, Mac, Reg, pVal) {				\
+	SK_U8	*pByte;										\
+	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
+	SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)			\
+		(((SK_U16)(pByte[0]) & 0x00ff)|					\
+		(((SK_U16)(pByte[1]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)		\
+		(((SK_U16)(pByte[2]) & 0x00ff)|					\
+		(((SK_U16)(pByte[3]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16)		\
+		(((SK_U16)(pByte[4]) & 0x00ff)|					\
+		(((SK_U16)(pByte[5]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), GMA((Mac), (Reg+12)), (SK_U16)		\
+		(((SK_U16)(pByte[6]) & 0x00ff)|					\
+		(((SK_U16)(pByte[7]) << 8) & 0xff00)));			\
+}
+
+/*
+ * Different MAC Types
+ */
+#define SK_MAC_XMAC		0	/* Xaqti XMAC II */
+#define SK_MAC_GMAC		1	/* Marvell GMAC */
+
+/*
+ * Different PHY Types
+ */
+#define SK_PHY_XMAC			0	/* integrated in XMAC II */
+#define SK_PHY_BCOM			1	/* Broadcom BCM5400 */
+#define SK_PHY_LONE			2	/* Level One LXT1000 */
+#define SK_PHY_NAT			3	/* National DP83891 */
+#define SK_PHY_MARV_COPPER	4	/* Marvell 88E1011S */
+#define SK_PHY_MARV_FIBER	5	/* Marvell 88E1011S working on fiber */
+
+/*
+ * PHY addresses (bits 12..8 of PHY address reg)
+ */
+#define PHY_ADDR_XMAC	(0<<8)
+#define PHY_ADDR_BCOM	(1<<8)
+#define PHY_ADDR_LONE	(3<<8)
+#define PHY_ADDR_NAT	(0<<8)
+
+/* GPHY address (bits 15..11 of SMI control reg) */
+#define PHY_ADDR_MARV	0
+
+/*
+ * macros to access the PHY
+ *
+ * PHY_READ()		read a 16 bit value from the PHY
+ * PHY_WRITE()		write a 16 bit value to the PHY
+ *
+ * para:
+ * 	IoC		I/O context needed for SK I/O macros
+ * 	pPort	Pointer to port struct for PhyAddr
+ * 	Mac		XMAC to access		values: MAC_1 or MAC_2
+ * 	PhyReg	PHY Register to read or write
+ * 	(p)Val	Value or pointer to the value which should be read or
+ *			written.
+ *
+ * usage:	PHY_READ(IoC, pPort, MAC_1, PHY_CTRL, Value);
+ * Warning: a PHY_READ on an uninitialized PHY (PHY still in reset) never
+ *          comes back. This is checked in DEBUG mode.
+ */
+#ifndef DEBUG
+#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) {						\
+	SK_U16 Mmu;  														\
+																		\
+	XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr);	\
+	XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal));							\
+	if ((pPort)->PhyType != SK_PHY_XMAC) {								\
+		do {  															\
+			XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu);					\
+		} while ((Mmu & XM_MMU_PHY_RDY) == 0);							\
+		XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal));						\
+	}  																	\
+}
+#else
+#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) {						\
+	SK_U16 Mmu;  														\
+	int __i = 0;														\
+																		\
+	XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr);	\
+	XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal));							\
+	if ((pPort)->PhyType != SK_PHY_XMAC) {								\
+		do {  															\
+			XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu);					\
+			__i++;														\
+			if (__i > 100000) {											\
+				SK_DBG_PRINTF("*****************************\n");		\
+				SK_DBG_PRINTF("PHY_READ on uninitialized PHY\n");		\
+				SK_DBG_PRINTF("*****************************\n");		\
+				break;													\
+			}															\
+		} while ((Mmu & XM_MMU_PHY_RDY) == 0);							\
+		XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal));						\
+	}  																	\
+}
+#endif /* DEBUG */
+
+#define PHY_WRITE(IoC, pPort, Mac, PhyReg, Val) {						\
+	SK_U16 Mmu;															\
+																		\
+	if ((pPort)->PhyType != SK_PHY_XMAC) {								\
+		do {  															\
+			XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu);					\
+		} while ((Mmu & XM_MMU_PHY_BUSY) != 0);							\
+	}  																	\
+	XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr);	\
+	XM_OUT16((IoC), (Mac), XM_PHY_DATA, (Val));							\
+	if ((pPort)->PhyType != SK_PHY_XMAC) {								\
+		do {  															\
+			XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu);					\
+		} while ((Mmu & XM_MMU_PHY_BUSY) != 0);							\
+	}  																	\
+}
+
+/*
+ *	Macro PCI_C()
+ *
+ *	Use this macro to access PCI config register from the I/O space.
+ *
+ * para:
+ *	Addr	PCI configuration register to access.
+ *			Values:	PCI_VENDOR_ID ... PCI_VPD_ADR_REG,
+ *
+ * usage	SK_IN16(pAC, PCI_C(PCI_VENDOR_ID), pVal);
+ */
+#define PCI_C(Addr)	(B7_CFG_SPC + (Addr))	/* PCI Config Space */
+
+/*
+ *	Macro SK_HW_ADDR(Base, Addr)
+ *
+ *	Calculates the effective HW address
+ *
+ * para:
+ *	Base	I/O or memory base address
+ *	Addr	Address offset
+ *
+ * usage:	May be used in SK_INxx and SK_OUTxx macros
+ *		#define SK_IN8(pAC, Addr, pVal) ...\
+ *			*pVal = (SK_U8)inp(SK_HW_ADDR(pAC->Hw.Iop, Addr)))
+ */
+#ifdef	SK_MEM_MAPPED_IO
+#define SK_HW_ADDR(Base, Addr)	((Base) + (Addr))
+#else	/* SK_MEM_MAPPED_IO */
+#define SK_HW_ADDR(Base, Addr)	\
+			((Base) + (((Addr) & 0x7f) | (((Addr) >> 7 > 0) ? 0x80 : 0)))
+#endif	/* SK_MEM_MAPPED_IO */
+
+#define SZ_LONG	(sizeof(SK_U32))
+
+/*
+ *	Macro SK_HWAC_LINK_LED()
+ *
+ *	Use this macro to set the link LED mode.
+ * para:
+ *	pAC		Pointer to adapter context struct
+ *	IoC		I/O context needed for SK I/O macros
+ *  Port	Port number
+ *	Mode	Mode to set for this LED
+ */
+#define SK_HWAC_LINK_LED(pAC, IoC, Port, Mode) \
+	SK_OUT8(IoC, MR_ADDR(Port, LNK_LED_REG), Mode);
+
+
+/* typedefs *******************************************************************/
+
+
+/* function prototypes ********************************************************/
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
+
+#endif	/* __INC_SKGEHW_H */
diff --git a/drivers/net/sk98lin/h/skgehwt.h b/drivers/net/sk98lin/h/skgehwt.h
new file mode 100644
index 0000000..8aa9edd
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgehwt.h
@@ -0,0 +1,74 @@
+/******************************************************************************
+ *
+ * Name:	skhwt.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.5 $
+ * Date:	$Date: 1999/11/22 13:54:24 $
+ * Purpose:	Defines for the hardware timer functions
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skgehwt.h,v $
+ *	Revision 1.5  1999/11/22 13:54:24  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.4  1998/08/19 09:50:58  gklug
+ *	fix: remove struct keyword from c-code (see CCC) add typedefs
+ *
+ *	Revision 1.3  1998/08/14 07:09:29  gklug
+ *	fix: chg pAc -> pAC
+ *
+ *	Revision 1.2  1998/08/07 12:54:21  gklug
+ *	fix: first compiled version
+ *
+ *	Revision 1.1  1998/08/07 09:32:58  gklug
+ *	first version
+ *
+ *
+ *
+ *
+ *
+ ******************************************************************************/
+
+/*
+ * SKGEHWT.H	contains all defines and types for the timer functions
+ */
+
+#ifndef	_SKGEHWT_H_
+#define _SKGEHWT_H_
+
+/*
+ * SK Hardware Timer
+ * - needed wherever the HWT module is used
+ * - use in Adapters context name pAC->Hwt
+ */
+typedef	struct s_Hwt {
+	SK_U32		TStart ;	/* HWT start */
+	SK_U32		TStop ;		/* HWT stop */
+	int		TActive ;	/* HWT: flag : active/inactive */
+} SK_HWT;
+
+extern void SkHwtInit(SK_AC *pAC, SK_IOC Ioc);
+extern void SkHwtStart(SK_AC *pAC, SK_IOC Ioc, SK_U32 Time);
+extern void SkHwtStop(SK_AC *pAC, SK_IOC Ioc);
+extern SK_U32 SkHwtRead(SK_AC *pAC,SK_IOC Ioc);
+extern void SkHwtIsr(SK_AC *pAC, SK_IOC Ioc);
+#endif	/* _SKGEHWT_H_ */
diff --git a/drivers/net/sk98lin/h/skgei2c.h b/drivers/net/sk98lin/h/skgei2c.h
new file mode 100644
index 0000000..e639f73
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgei2c.h
@@ -0,0 +1,299 @@
+/******************************************************************************
+ *
+ * Name:	skgei2c.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.23 $
+ * Date:	$Date: 2002/12/19 14:34:27 $
+ * Purpose:	Special GEnesis defines for TWSI
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skgei2c.h,v $
+ *	Revision 1.23  2002/12/19 14:34:27  rschmidt
+ *	Added cast in macros SK_I2C_SET_BIT() and SK_I2C_CLR_BIT()
+ *	Editorial changes (TWSI)
+ *
+ *	Revision 1.22  2002/10/14 16:45:56  rschmidt
+ *	Editorial changes (TWSI)
+ *
+ *	Revision 1.21  2002/08/13 08:42:24  rschmidt
+ *	Changed define for SK_MIN_SENSORS back to 5
+ *	Merged defines for PHY PLL 3V3 voltage (A and B)
+ *	Editorial changes
+ *
+ *	Revision 1.20  2002/08/06 09:43:56  jschmalz
+ *	Extensions and changes for Yukon
+ *
+ *	Revision 1.19  2002/08/02 12:00:08  rschmidt
+ *	Added defines for YUKON sensors
+ *	Editorial changes
+ *
+ *	Revision 1.18  2001/08/16 12:44:33  afischer
+ *	LM80 sensor init values corrected
+ *
+ *	Revision 1.17  1999/11/22 13:55:25  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.16  1999/11/12 08:24:10  malthoff
+ *	Change voltage warning and error limits
+ *	(warning +-5%, error +-10%).
+ *
+ *	Revision 1.15  1999/09/14 14:14:43  malthoff
+ *	The 1000BT Dual Link adapter has got only one Fan.
+ *	The second Fan has been removed.
+ *
+ *	Revision 1.14  1999/05/27 13:40:50  malthoff
+ *	Fan Divisor = 1. Assuming fan with 6500 rpm.
+ *
+ *	Revision 1.13  1999/05/20 14:56:55  malthoff
+ *	Bug Fix: Missing brace in SK_LM80_FAN_FAKTOR.
+ *
+ *	Revision 1.12  1999/05/20 09:22:00  cgoos
+ *	Changes for 1000Base-T (Fan sensors).
+ *
+ *	Revision 1.11  1998/10/14 05:57:22  cgoos
+ *	Fixed compilation warnings.
+ *
+ *	Revision 1.10  1998/09/04 08:37:00  malthoff
+ *	bugfix: correct the SK_I2C_GET_CTL() macro.
+ *
+ *	Revision 1.9  1998/08/25 06:10:03  gklug
+ *	add: thresholds for all sensors
+ *
+ *	Revision 1.8  1998/08/20 11:37:42  gklug
+ *	chg: change Ioc to IoC
+ *
+ *	Revision 1.7  1998/08/20 08:53:11  gklug
+ *	fix: compiler errors
+ *	add: Threshold values
+ *
+ *	Revision 1.6  1998/08/17 11:37:09  malthoff
+ *	Bugfix in SK_I2C_CTL macro. The parameter 'dev'
+ *	has to be shifted 9 bits.
+ *
+ *	Revision 1.5  1998/08/17 06:52:21  malthoff
+ *	Remove unrequired macros.
+ *	Add macros for accessing TWSI SW register.
+ *
+ *	Revision 1.4  1998/08/13 08:30:18  gklug
+ *	add: conversion factors for read values
+ *	add: new state SEN_VALEXT to read extension value of temperature sensor
+ *
+ *	Revision 1.3  1998/08/12 13:37:56  gklug
+ *	rmv: error numbers and messages
+ *
+ *	Revision 1.2  1998/08/11 07:54:38  gklug
+ *	add: sensor states for GE sensors
+ *	add: Macro to access TWSI hardware register
+ *	chg: Error messages for TWSI errors
+ *
+ *	Revision 1.1  1998/07/17 11:27:56  gklug
+ *	Created.
+ *
+ *
+ *
+ ******************************************************************************/
+
+/*
+ * SKGEI2C.H	contains all SK-98xx specific defines for the TWSI handling
+ */
+
+#ifndef _INC_SKGEI2C_H_
+#define _INC_SKGEI2C_H_
+
+/*
+ * Macros to access the B2_I2C_CTRL
+ */
+#define SK_I2C_CTL(IoC, flag, dev, reg, burst) \
+	SK_OUT32(IoC, B2_I2C_CTRL,\
+		(flag ? 0x80000000UL : 0x0L) | \
+		(((SK_U32) reg << 16) & I2C_ADDR) | \
+		(((SK_U32) dev << 9) & I2C_DEV_SEL) | \
+		(( burst << 4) & I2C_BURST_LEN))
+
+#define SK_I2C_STOP(IoC) {				\
+	SK_U32	I2cCtrl;				\
+	SK_IN32(IoC, B2_I2C_CTRL, &I2cCtrl);		\
+	SK_OUT32(IoC, B2_I2C_CTRL, I2cCtrl | I2C_STOP);	\
+}
+
+#define SK_I2C_GET_CTL(IoC, pI2cCtrl)	SK_IN32(IoC, B2_I2C_CTRL, pI2cCtrl)
+
+/*
+ * Macros to access the TWSI SW Registers
+ */
+#define SK_I2C_SET_BIT(IoC, SetBits) {			\
+	SK_U8	OrgBits;				\
+	SK_IN8(IoC, B2_I2C_SW, &OrgBits);		\
+	SK_OUT8(IoC, B2_I2C_SW, OrgBits | (SK_U8)(SetBits));	\
+}
+
+#define SK_I2C_CLR_BIT(IoC, ClrBits) {			\
+	SK_U8	OrgBits;				\
+	SK_IN8(IoC, B2_I2C_SW, &OrgBits);		\
+	SK_OUT8(IoC, B2_I2C_SW, OrgBits & ~((SK_U8)(ClrBits)));	\
+}
+
+#define SK_I2C_GET_SW(IoC, pI2cSw)	SK_IN8(IoC, B2_I2C_SW, pI2cSw)
+
+/*
+ * define the possible sensor states
+ */
+#define	SK_SEN_IDLE		0	/* Idle: sensor not read */
+#define	SK_SEN_VALUE	1	/* Value Read cycle */
+#define	SK_SEN_VALEXT	2	/* Extended Value Read cycle */
+
+/*
+ * Conversion factor to convert read Voltage sensor to milli Volt
+ * Conversion factor to convert read Temperature sensor to 10th degree Celsius
+ */
+#define	SK_LM80_VT_LSB		22	/* 22mV LSB resolution */
+#define	SK_LM80_TEMP_LSB	10	/* 1 degree LSB resolution */
+#define	SK_LM80_TEMPEXT_LSB	5	/* 0.5 degree LSB resolution for the
+					 * extension value
+					 */
+#define SK_LM80_FAN_FAKTOR	((22500L*60)/(1*2))
+/* formula: counter = (22500*60)/(rpm * divisor * pulses/2)
+ * assuming: 6500rpm, 4 pulses, divisor 1
+ */
+
+/*
+ * Define sensor management data
+ * Maximum is reached on copperfield with dual Broadcom.
+ * Board specific maximum is in pAC->I2c.MaxSens
+ */
+#define	SK_MAX_SENSORS	8	/* maximal no. of installed sensors */
+#define	SK_MIN_SENSORS	5	/* minimal no. of installed sensors */
+
+/*
+ * To watch the statemachine (JS) use the timer in two ways instead of one as hitherto
+ */
+#define	SK_TIMER_WATCH_STATEMACHINE	0	/* Watch the statemachine to finish in a specific time */
+#define	SK_TIMER_NEW_GAUGING    	1	/* Start a new gauging when timer expires */
+
+
+/*
+ * Defines for the individual Thresholds
+ */
+
+/* Temperature sensor */
+#define	SK_SEN_TEMP_HIGH_ERR    800	/* Temperature High Err  Threshold */
+#define	SK_SEN_TEMP_HIGH_WARN	700	/* Temperature High Warn Threshold */
+#define	SK_SEN_TEMP_LOW_WARN	100	/* Temperature Low  Warn Threshold */
+#define	SK_SEN_TEMP_LOW_ERR       0	/* Temperature Low  Err  Threshold */
+
+/* VCC which should be 5 V */
+#define	SK_SEN_PCI_5V_HIGH_ERR  	5588	/* Voltage PCI High Err  Threshold */
+#define	SK_SEN_PCI_5V_HIGH_WARN     5346	/* Voltage PCI High Warn Threshold */
+#define	SK_SEN_PCI_5V_LOW_WARN		4664	/* Voltage PCI Low  Warn Threshold */
+#define	SK_SEN_PCI_5V_LOW_ERR		4422	/* Voltage PCI Low  Err  Threshold */
+
+/*
+ * VIO may be 5 V or 3.3 V. Initialization takes two parts:
+ * 1. Initialize lowest lower limit and highest higher limit.
+ * 2. After the first value is read correct the upper or the lower limit to
+ *    the appropriate C constant.
+ *
+ * Warning limits are +-5% of the exepected voltage.
+ * Error limits are +-10% of the expected voltage.
+ */
+
+/* Bug fix AF: 16.Aug.2001: Correct the init base of LM80 sensor */
+
+#define	SK_SEN_PCI_IO_5V_HIGH_ERR	5566	/* + 10% V PCI-IO High Err Threshold */
+#define	SK_SEN_PCI_IO_5V_HIGH_WARN	5324	/* +  5% V PCI-IO High Warn Threshold */
+					/*		5000	mVolt */
+#define	SK_SEN_PCI_IO_5V_LOW_WARN	4686	/* -  5% V PCI-IO Low Warn Threshold */
+#define	SK_SEN_PCI_IO_5V_LOW_ERR	4444	/* - 10% V PCI-IO Low Err Threshold */
+
+#define	SK_SEN_PCI_IO_RANGE_LIMITER	4000	/* 4000 mV range delimiter */
+
+/* correction values for the second pass */
+#define	SK_SEN_PCI_IO_3V3_HIGH_ERR	3850	/* + 15% V PCI-IO High Err Threshold */
+#define	SK_SEN_PCI_IO_3V3_HIGH_WARN	3674	/* + 10% V PCI-IO High Warn Threshold */
+					/*		3300	mVolt */
+#define	SK_SEN_PCI_IO_3V3_LOW_WARN  2926	/* - 10% V PCI-IO Low Warn Threshold */
+#define	SK_SEN_PCI_IO_3V3_LOW_ERR   2772	/* - 15% V PCI-IO Low Err  Threshold */
+
+
+/*
+ * VDD voltage
+ */
+#define	SK_SEN_VDD_HIGH_ERR	    3630	/* Voltage ASIC High Err  Threshold */
+#define	SK_SEN_VDD_HIGH_WARN    3476	/* Voltage ASIC High Warn Threshold */
+#define	SK_SEN_VDD_LOW_WARN     3146	/* Voltage ASIC Low  Warn Threshold */
+#define	SK_SEN_VDD_LOW_ERR      2970	/* Voltage ASIC Low  Err  Threshold */
+
+/*
+ * PHY PLL 3V3 voltage
+ */
+#define	SK_SEN_PLL_3V3_HIGH_ERR		3630	/* Voltage PMA High Err  Threshold */
+#define	SK_SEN_PLL_3V3_HIGH_WARN	3476	/* Voltage PMA High Warn Threshold */
+#define	SK_SEN_PLL_3V3_LOW_WARN		3146	/* Voltage PMA Low  Warn Threshold */
+#define	SK_SEN_PLL_3V3_LOW_ERR		2970	/* Voltage PMA Low  Err  Threshold */
+
+/*
+ * VAUX (YUKON only)
+ */
+#define	SK_SEN_VAUX_3V3_HIGH_ERR	3630	/* Voltage VAUX High Err Threshold */
+#define	SK_SEN_VAUX_3V3_HIGH_WARN	3476	/* Voltage VAUX High Warn Threshold */
+#define	SK_SEN_VAUX_3V3_LOW_WARN	3146	/* Voltage VAUX Low Warn Threshold */
+#define	SK_SEN_VAUX_3V3_LOW_ERR	    2970	/* Voltage VAUX Low Err Threshold */
+#define	SK_SEN_VAUX_0V_WARN_ERR	       0	/* if VAUX not present */
+#define	SK_SEN_VAUX_RANGE_LIMITER	1000	/* 1000 mV range delimiter */
+
+/*
+ * PHY 2V5 voltage
+ */
+#define	SK_SEN_PHY_2V5_HIGH_ERR		2750	/* Voltage PHY High Err Threshold */
+#define	SK_SEN_PHY_2V5_HIGH_WARN	2640	/* Voltage PHY High Warn Threshold */
+#define	SK_SEN_PHY_2V5_LOW_WARN		2376	/* Voltage PHY Low Warn Threshold */
+#define	SK_SEN_PHY_2V5_LOW_ERR		2222	/* Voltage PHY Low Err Threshold */
+
+/*
+ * ASIC Core 1V5 voltage (YUKON only)
+ */
+#define	SK_SEN_CORE_1V5_HIGH_ERR    1650	/* Voltage ASIC Core High Err Threshold */
+#define	SK_SEN_CORE_1V5_HIGH_WARN	1575	/* Voltage ASIC Core High Warn Threshold */
+#define	SK_SEN_CORE_1V5_LOW_WARN	1425	/* Voltage ASIC Core Low Warn Threshold */
+#define	SK_SEN_CORE_1V5_LOW_ERR 	1350	/* Voltage ASIC Core Low Err Threshold */
+
+/*
+ * FAN 1 speed
+ */
+/* assuming: 6500rpm +-15%, 4 pulses,
+ * warning at:	80 %
+ * error at:	70 %
+ * no upper limit
+ */
+#define	SK_SEN_FAN_HIGH_ERR		20000	/* FAN Speed High Err Threshold */
+#define	SK_SEN_FAN_HIGH_WARN	20000	/* FAN Speed High Warn Threshold */
+#define	SK_SEN_FAN_LOW_WARN 	5200	/* FAN Speed Low Warn Threshold */
+#define	SK_SEN_FAN_LOW_ERR		4550	/* FAN Speed Low Err Threshold */
+
+/*
+ * Some Voltages need dynamic thresholds
+ */
+#define	SK_SEN_DYN_INIT_NONE		 0  /* No dynamic init of thresholds */
+#define	SK_SEN_DYN_INIT_PCI_IO		10  /* Init PCI-IO with new thresholds */
+#define	SK_SEN_DYN_INIT_VAUX		11  /* Init VAUX with new thresholds */
+
+extern	int SkLm80ReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen);
+#endif	/* n_INC_SKGEI2C_H */
diff --git a/drivers/net/sk98lin/h/skgeinit.h b/drivers/net/sk98lin/h/skgeinit.h
new file mode 100644
index 0000000..cdddef9
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgeinit.h
@@ -0,0 +1,1113 @@
+/******************************************************************************
+ *
+ * Name:	skgeinit.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.75 $
+ * Date:	$Date: 2003/02/05 13:36:39 $
+ * Purpose:	Structures and prototypes for the GE Init Module
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skgeinit.h,v $
+ *	Revision 1.75  2003/02/05 13:36:39  rschmidt
+ *	Added define SK_FACT_78	for YUKON's Host Clock of 78.12 MHz
+ *	Editorial changes
+ *
+ *	Revision 1.74  2003/01/28 09:39:16  rschmidt
+ *	Added entry GIYukonLite in s_GeInit structure
+ *	Editorial changes
+ *
+ *	Revision 1.73  2002/11/15 12:47:25  rschmidt
+ *	Replaced error message SKERR_HWI_E024 for Cable Diagnostic with
+ *	Rx queue error in SkGeStopPort().
+ *
+ *	Revision 1.72  2002/11/12 17:08:35  rschmidt
+ *	Added entries for Cable Diagnostic to Port structure
+ *	Added entries GIPciSlot64 and GIPciClock66 in s_GeInit structure
+ *	Added error message for Cable Diagnostic
+ *	Added prototypes for SkGmCableDiagStatus()
+ *	Editorial changes
+ *
+ *	Revision 1.71  2002/10/21 11:26:10  mkarl
+ *	Changed interface of SkGeInitAssignRamToQueues().
+ *
+ *	Revision 1.70  2002/10/14 08:21:32  rschmidt
+ *	Changed type of GICopperType, GIVauxAvail to SK_BOOL
+ *	Added entry PRxOverCnt to Port structure
+ *	Added entry GIYukon32Bit in s_GeInit structure
+ *	Editorial changes
+ *
+ *	Revision 1.69  2002/10/09 16:57:15  mkarl
+ *	Added some constants and macros for SkGeInitAssignRamToQueues().
+ *
+ *	Revision 1.68  2002/09/12 08:58:51  rwahl
+ *	Retrieve counters needed for XMAC errata workarounds directly because
+ *	PNMI returns corrected counter values (e.g. #10620).
+ *
+ *	Revision 1.67  2002/08/16 14:40:30  rschmidt
+ *	Added entries GIGenesis and GICopperType in s_GeInit structure
+ *	Added prototypes for SkMacHashing()
+ *	Editorial changes
+ *
+ *	Revision 1.66  2002/08/12 13:27:21  rschmidt
+ *	Added defines for Link speed capabilities
+ *	Added entry PLinkSpeedCap to Port structure
+ *	Added entry GIVauxAvail in s_GeInit structure
+ *	Added prototypes for SkMacPromiscMode()
+ *	Editorial changes
+ *
+ *	Revision 1.65  2002/08/08 15:46:18  rschmidt
+ *	Added define SK_PHY_ACC_TO for PHY access timeout
+ *	Added define SK_XM_RX_HI_WM for XMAC Rx High Watermark
+ *	Added define SK_MIN_TXQ_SIZE for Min RAM Buffer Tx Queue Size
+ *	Added entry PhyId1 to Port structure
+ *
+ *	Revision 1.64  2002/07/23 16:02:56  rschmidt
+ *	Added entry GIWolOffs in s_GeInit struct (HW-Bug in YUKON 1st rev.)
+ *	Added prototypes for: SkGePhyRead(), SkGePhyWrite()
+ *
+ *	Revision 1.63  2002/07/18 08:17:38  rwahl
+ *	Corrected definitions for SK_LSPEED_xxx & SK_LSPEED_STAT_xxx.
+ *
+ *	Revision 1.62  2002/07/17 18:21:55  rwahl
+ *	Added SK_LSPEED_INDETERMINATED define.
+ *
+ *	Revision 1.61  2002/07/17 17:16:03  rwahl
+ *	- MacType now member of GIni struct.
+ *	- Struct alignment to 32bit.
+ *	- Editorial change.
+ *
+ *	Revision 1.60  2002/07/15 18:23:39  rwahl
+ *	Added GeMacFunc to GE Init structure.
+ *	Added prototypes for SkXmUpdateStats(), SkGmUpdateStats(),
+ *	  SkXmMacStatistic(), SkGmMacStatistic(), SkXmResetCounter(),
+ *	  SkGmResetCounter(), SkXmOverflowStatus(), SkGmOverflowStatus().
+ *	Added defines for current link speed state.
+ *	Added ERRMSG defintions for MacUpdateStat() & MacStatistics().
+ *
+ *	Revision 1.59  2002/07/15 15:40:22  rschmidt
+ *	Added entry PLinkSpeedUsed to Port structure
+ *	Editorial changes
+ *
+ *	Revision 1.58  2002/06/10 09:36:30  rschmidt
+ *	Editorial changes.
+ *
+ *	Revision 1.57  2002/06/05 08:18:00  rschmidt
+ *	Corrected alignment in Port Structure
+ *	Added new prototypes for GMAC
+ *	Editorial changes
+ *
+ *	Revision 1.56  2002/04/25 11:38:12  rschmidt
+ *	Added defines for Link speed values
+ *	Added defines for Loopback parameters for MAC and PHY
+ *	Removed entry PRxCmd from Port structure
+ *	Added entry PLinkSpeed to Port structure
+ *	Added entries GIChipId and GIChipRev to GE Init structure
+ *	Removed entry GIAnyPortAct from GE Init structure
+ *	Added prototypes for: SkMacInit(), SkMacInitPhy(),
+ *	SkMacRxTxDisable(), SkMacSoftRst(), SkMacHardRst(), SkMacIrq(),
+ *	SkMacIrqDisable(), SkMacFlushTxFifo(), SkMacFlushRxFifo(),
+ *	SkMacAutoNegDone(), SkMacAutoNegLipaPhy(), SkMacSetRxTxEn(),
+ *	SkXmPhyRead(), SkXmPhyRead(), SkGmPhyWrite(), SkGmPhyWrite();
+ *	Removed prototypes for static functions in SkXmac2.c
+ *	Editorial changes
+ *
+ *	Revision 1.55  2002/02/26 15:24:53  rwahl
+ *	Fix: no link with manual configuration (#10673). The previous fix for
+ *	#10639 was removed. So for RLMT mode = CLS the RLMT may switch to
+ *	misconfigured port. It should not occur for the other RLMT modes.
+ *
+ *	Revision 1.54  2002/01/18 16:52:52  rwahl
+ *	Editorial corrections.
+ *
+ *	Revision 1.53  2001/11/20 09:19:58  rwahl
+ *	Reworked bugfix #10639 (no dependency to RLMT mode).
+ *
+ *	Revision 1.52  2001/10/26 07:52:23  afischer
+ *	Port switching bug in `check local link` mode
+ *
+ *	Revision 1.51  2001/02/09 12:26:38  cgoos
+ *	Inserted #ifdef DIAG for half duplex workaround timer.
+ *
+ *	Revision 1.50  2001/02/07 07:56:40  rassmann
+ *	Corrected copyright.
+ *
+ *	Revision 1.49  2001/01/31 15:32:18  gklug
+ *	fix: problem with autosensing an SR8800 switch
+ *	add: counter for autoneg timeouts
+ *
+ *	Revision 1.48  2000/11/09 11:30:10  rassmann
+ *	WA: Waiting after releasing reset until BCom chip is accessible.
+ *
+ *	Revision 1.47  2000/10/18 12:22:40  cgoos
+ *	Added workaround for half duplex hangup.
+ *
+ *	Revision 1.46  2000/08/10 11:28:00  rassmann
+ *	Editorial changes.
+ *	Preserving 32-bit alignment in structs for the adapter context.
+ *
+ *	Revision 1.45  1999/11/22 13:56:19  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.44  1999/10/26 07:34:15  malthoff
+ *	The define SK_LNK_ON has been lost in v1.41.
+ *
+ *	Revision 1.43  1999/10/06 09:30:16  cgoos
+ *	Changed SK_XM_THR_JUMBO.
+ *
+ *	Revision 1.42  1999/09/16 12:58:26  cgoos
+ *	Changed SK_LED_STANDY macro to be independent of HW link sync.
+ *
+ *	Revision 1.41  1999/07/30 06:56:14  malthoff
+ *	Correct comment for SK_MS_STAT_UNSET.
+ *
+ *	Revision 1.40  1999/05/27 13:38:46  cgoos
+ *	Added SK_BMU_TX_WM.
+ *	Made SK_BMU_TX_WM and SK_BMU_RX_WM user-definable.
+ *	Changed XMAC Tx treshold to max. values.
+ *
+ *	Revision 1.39  1999/05/20 14:35:26  malthoff
+ *	Remove prototypes for SkGeLinkLED().
+ *
+ *	Revision 1.38  1999/05/19 11:59:12  cgoos
+ *	Added SK_MS_CAP_INDETERMINATED define.
+ *
+ *	Revision 1.37  1999/05/19 07:32:33  cgoos
+ *	Changes for 1000Base-T.
+ *	LED-defines for HWAC_LINK_LED macro.
+ *
+ *	Revision 1.36  1999/04/08 14:00:24  gklug
+ *	add:Port struct field PLinkResCt
+ *
+ *	Revision 1.35  1999/03/25 07:43:07  malthoff
+ *	Add error string for SKERR_HWI_E018MSG.
+ *
+ *	Revision 1.34  1999/03/12 16:25:57  malthoff
+ *	Remove PPollRxD and PPollTxD.
+ *	Add SKERR_HWI_E017MSG. and SK_DPOLL_MAX.
+ *
+ *	Revision 1.33  1999/03/12 13:34:41  malthoff
+ *	Add Autonegotiation error codes.
+ *	Change defines for parameter Mode in SkXmSetRxCmd().
+ *	Replace __STDC__ by SK_KR_PROTO.
+ *
+ *	Revision 1.32  1999/01/25 14:40:20  mhaveman
+ *	Added new return states for the virtual management port if multiple
+ *	ports are active but differently configured.
+ *
+ *	Revision 1.31  1998/12/11 15:17:02  gklug
+ *	add: Link partnet autoneg states : Unknown Manual and Auto-negotiation
+ *
+ *	Revision 1.30  1998/12/07 12:17:04  gklug
+ *	add: Link Partner auto-negotiation flag
+ *
+ *	Revision 1.29  1998/12/01 10:54:42  gklug
+ *	add: variables for XMAC Errata
+ *
+ *	Revision 1.28  1998/12/01 10:14:15  gklug
+ *	add: PIsave saves the Interrupt status word
+ *
+ *	Revision 1.27  1998/11/26 15:24:52  mhaveman
+ *	Added link status states SK_LMODE_STAT_AUTOHALF and
+ *	SK_LMODE_STAT_AUTOFULL which are used by PNMI.
+ *
+ *	Revision 1.26  1998/11/26 14:53:01  gklug
+ *	add:autoNeg Timeout variable
+ *
+ *	Revision 1.25  1998/11/26 08:58:50  gklug
+ *	add: Link Mode configuration (AUTO Sense mode)
+ *
+ *	Revision 1.24  1998/11/24 13:30:27  gklug
+ *	add: PCheckPar to port struct
+ *
+ *	Revision 1.23  1998/11/18 13:23:26  malthoff
+ *	Add SK_PKT_TO_MAX.
+ *
+ *	Revision 1.22  1998/11/18 13:19:54  gklug
+ *	add: PPrevShorts and PLinkBroken to port struct for WA XMAC Errata #C1
+ *
+ *	Revision 1.21  1998/10/26 08:02:57  malthoff
+ *	Add GIRamOffs.
+ *
+ *	Revision 1.20  1998/10/19 07:28:37  malthoff
+ *	Add prototype for SkGeInitRamIface().
+ *
+ *	Revision 1.19  1998/10/14 14:47:48  malthoff
+ *	SK_TIMER should not be defined for Diagnostics.
+ *	Add SKERR_HWI_E015MSG and SKERR_HWI_E016MSG.
+ *
+ *	Revision 1.18  1998/10/14 14:00:03  gklug
+ *	add: timer to port struct for workaround of Errata #2
+ *
+ *	Revision 1.17  1998/10/14 11:23:09  malthoff
+ *	Add prototype for SkXmAutoNegDone().
+ *	Fix SkXmSetRxCmd() prototype statement.
+ *
+ *	Revision 1.16  1998/10/14 05:42:29  gklug
+ *	add: HWLinkUp flag to Port struct
+ *
+ *	Revision 1.15  1998/10/09 08:26:33  malthoff
+ *	Rename SK_RB_ULPP_B to SK_RB_LLPP_B.
+ *
+ *	Revision 1.14  1998/10/09 07:11:13  malthoff
+ *	bug fix: SK_FACT_53 is 85 not 117.
+ *	Rework time out init values.
+ *	Add GIPortUsage and corresponding defines.
+ *	Add some error log messages.
+ *
+ *	Revision 1.13  1998/10/06 14:13:14  malthoff
+ *	Add prototype for SkGeLoadLnkSyncCnt().
+ *
+ *	Revision 1.12  1998/10/05 11:29:53  malthoff
+ *	bug fix: A comment was not closed.
+ *
+ *	Revision 1.11  1998/10/05 08:01:59  malthoff
+ *	Add default Timeout- Threshold- and
+ *	Watermark constants. Add QRam start and end
+ *	variables. Also add vars to store the polling
+ *	mode and receive command. Add new Error Log
+ *	Messages and function prototypes.
+ *
+ *	Revision 1.10  1998/09/28 13:34:48  malthoff
+ *	Add mode bits for LED functions.
+ *	Move Autoneg and Flow Ctrl bits from shgesirq.h
+ *	Add the required Error Log Entries
+ *	and Function Prototypes.
+ *
+ *	Revision 1.9  1998/09/16 14:38:41  malthoff
+ *	Rework the SK_LNK_xxx defines.
+ *	Add error log message defines.
+ *	Add prototypes for skxmac2.c
+ *
+ *	Revision 1.8  1998/09/11 05:29:18  gklug
+ *	add: init state of a port
+ *
+ *	Revision 1.7  1998/09/08 08:35:52  gklug
+ *	add: defines of the Init Levels
+ *
+ *	Revision 1.6  1998/09/03 13:48:42  gklug
+ *	add: Link strati, capabilities to Port struct
+ *
+ *	Revision 1.5  1998/09/03 13:30:59  malthoff
+ *	Add SK_LNK_BLINK and SK_LNK_PERM.
+ *
+ *	Revision 1.4  1998/09/03 09:55:31  malthoff
+ *	Add constants for parameters Dir and RstMode
+ *	when calling SkGeStopPort().
+ *	Rework the prototype section.
+ *	Add Queue Address offsets PRxQOff, PXsQOff, and PXaQOff.
+ *	Remove Ioc with IoC.
+ *
+ *	Revision 1.3  1998/08/19 09:11:54  gklug
+ *	fix: struct are removed from c-source (see CCC)
+ *	add: typedefs for all structs
+ *
+ *	Revision 1.2  1998/07/28 12:38:26  malthoff
+ *	The prototypes got the parameter 'IoC'.
+ *
+ *	Revision 1.1  1998/07/23 09:50:24  malthoff
+ *	Created.
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKGEINIT_H_
+#define __INC_SKGEINIT_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif	/* __cplusplus */
+
+/* defines ********************************************************************/
+
+/* modifying Link LED behaviour (used with SkGeLinkLED()) */
+#define SK_LNK_OFF		LED_OFF
+#define SK_LNK_ON		(LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
+#define SK_LNK_BLINK	(LED_ON | LED_BLK_ON  | LED_SYNC_ON)
+#define SK_LNK_PERM		(LED_ON | LED_BLK_OFF | LED_SYNC_ON)
+#define SK_LNK_TST		(LED_ON | LED_BLK_ON  | LED_SYNC_OFF)
+
+/* parameter 'Mode' when calling SK_HWAC_LINK_LED() */
+#define SK_LED_OFF		LED_OFF
+#define SK_LED_ACTIVE	(LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
+#define SK_LED_STANDBY	(LED_ON | LED_BLK_ON  | LED_SYNC_OFF)
+
+/* addressing LED Registers in SkGeXmitLED() */
+#define XMIT_LED_INI	0
+#define XMIT_LED_CNT	(RX_LED_VAL - RX_LED_INI)
+#define XMIT_LED_CTRL	(RX_LED_CTRL- RX_LED_INI)
+#define XMIT_LED_TST	(RX_LED_TST - RX_LED_INI)
+
+/* parameter 'Mode' when calling SkGeXmitLED() */
+#define SK_LED_DIS	0
+#define SK_LED_ENA	1
+#define SK_LED_TST	2
+
+/* Counter and Timer constants, for a host clock of 62.5 MHz */
+#define SK_XMIT_DUR		0x002faf08L		/*  50 ms */
+#define SK_BLK_DUR		0x01dcd650L		/* 500 ms */
+
+#define SK_DPOLL_DEF	0x00ee6b28L		/* 250 ms at 62.5 MHz */
+
+#define SK_DPOLL_MAX	0x00ffffffL		/* 268 ms at 62.5 MHz */
+										/* 215 ms at 78.12 MHz */
+
+#define SK_FACT_62		100			/* is given in percent */
+#define SK_FACT_53		 85         /* on GENESIS:	53.12 MHz */
+#define SK_FACT_78		125			/* on YUKON:	78.12 MHz */
+
+/* Timeout values */
+#define SK_MAC_TO_53	72			/* MAC arbiter timeout */
+#define SK_PKT_TO_53	0x2000		/* Packet arbiter timeout */
+#define SK_PKT_TO_MAX	0xffff		/* Maximum value */
+#define SK_RI_TO_53		36			/* RAM interface timeout */
+
+#define SK_PHY_ACC_TO	600000		/* PHY access timeout */
+
+/* RAM Buffer High Pause Threshold values */
+#define SK_RB_ULPP		( 8 * 1024)	/* Upper Level in kB/8 */
+#define SK_RB_LLPP_S	(10 * 1024)	/* Lower Level for small Queues */
+#define SK_RB_LLPP_B	(16 * 1024)	/* Lower Level for big Queues */
+
+#ifndef SK_BMU_RX_WM
+#define SK_BMU_RX_WM	0x600		/* BMU Rx Watermark */
+#endif
+#ifndef SK_BMU_TX_WM
+#define SK_BMU_TX_WM	0x600		/* BMU Tx Watermark */
+#endif
+
+/* XMAC II Rx High Watermark */
+#define SK_XM_RX_HI_WM	0x05aa		/* 1450 */
+
+/* XMAC II Tx Threshold */
+#define SK_XM_THR_REDL	0x01fb		/* .. for redundant link usage */
+#define SK_XM_THR_SL	0x01fb		/* .. for single link adapters */
+#define SK_XM_THR_MULL	0x01fb		/* .. for multiple link usage */
+#define SK_XM_THR_JUMBO	0x03fc		/* .. for jumbo frame usage */
+
+/* values for GIPortUsage */
+#define SK_RED_LINK		1		/* redundant link usage */
+#define SK_MUL_LINK		2		/* multiple link usage */
+#define SK_JUMBO_LINK	3		/* driver uses jumbo frames */
+
+/* Minimum RAM Buffer Rx Queue Size */
+#define SK_MIN_RXQ_SIZE	16		/* 16 kB */
+
+/* Minimum RAM Buffer Tx Queue Size */
+#define SK_MIN_TXQ_SIZE	16		/* 16 kB */
+
+/* Queue Size units */
+#define QZ_UNITS		0x7
+#define QZ_STEP			8
+
+/* Percentage of queue size from whole memory */
+/* 80 % for receive */
+#define RAM_QUOTA_RX	80L
+/* 0% for sync transfer */
+#define	RAM_QUOTA_SYNC	0L
+/* the rest (20%) is taken for async transfer */
+
+/* Get the rounded queue size in Bytes in 8k steps */
+#define ROUND_QUEUE_SIZE(SizeInBytes)					\
+	((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) &	\
+	~(QZ_STEP-1))
+
+/* Get the rounded queue size in KBytes in 8k steps */
+#define ROUND_QUEUE_SIZE_KB(Kilobytes) \
+	ROUND_QUEUE_SIZE((Kilobytes) * 1024L)
+
+/* Types of RAM Buffer Queues */
+#define SK_RX_SRAM_Q	1	/* small receive queue */
+#define SK_RX_BRAM_Q	2	/* big receive queue */
+#define SK_TX_RAM_Q		3	/* small or big transmit queue */
+
+/* parameter 'Dir' when calling SkGeStopPort() */
+#define SK_STOP_TX	1	/* Stops the transmit path, resets the XMAC */
+#define SK_STOP_RX	2	/* Stops the receive path */
+#define SK_STOP_ALL	3	/* Stops Rx and Tx path, resets the XMAC */
+
+/* parameter 'RstMode' when calling SkGeStopPort() */
+#define SK_SOFT_RST	1	/* perform a software reset */
+#define SK_HARD_RST	2	/* perform a hardware reset */
+
+/* Init Levels */
+#define SK_INIT_DATA	0	/* Init level 0: init data structures */
+#define SK_INIT_IO		1	/* Init level 1: init with IOs */
+#define SK_INIT_RUN		2	/* Init level 2: init for run time */
+
+/* Link Mode Parameter */
+#define SK_LMODE_HALF		1	/* Half Duplex Mode */
+#define SK_LMODE_FULL		2	/* Full Duplex Mode */
+#define SK_LMODE_AUTOHALF	3	/* AutoHalf Duplex Mode */
+#define SK_LMODE_AUTOFULL	4	/* AutoFull Duplex Mode */
+#define SK_LMODE_AUTOBOTH	5	/* AutoBoth Duplex Mode */
+#define SK_LMODE_AUTOSENSE	6	/* configured mode auto sensing */
+#define SK_LMODE_INDETERMINATED	7	/* indeterminated */
+
+/* Auto-negotiation timeout in 100ms granularity */
+#define SK_AND_MAX_TO		6	/* Wait 600 msec before link comes up */
+
+/* Auto-negotiation error codes */
+#define SK_AND_OK			0	/* no error */
+#define SK_AND_OTHER		1	/* other error than below */
+#define SK_AND_DUP_CAP		2	/* Duplex capabilities error */
+
+
+/* Link Speed Capabilities */
+#define SK_LSPEED_CAP_AUTO			(1<<0)	/* Automatic resolution */
+#define SK_LSPEED_CAP_10MBPS		(1<<1)	/* 10 Mbps */
+#define SK_LSPEED_CAP_100MBPS		(1<<2)	/* 100 Mbps */
+#define SK_LSPEED_CAP_1000MBPS		(1<<3)	/* 1000 Mbps */
+#define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */
+
+/* Link Speed Parameter */
+#define SK_LSPEED_AUTO				1	/* Automatic resolution */
+#define SK_LSPEED_10MBPS			2	/* 10 Mbps */
+#define SK_LSPEED_100MBPS			3	/* 100 Mbps */
+#define SK_LSPEED_1000MBPS			4	/* 1000 Mbps */
+#define SK_LSPEED_INDETERMINATED	5	/* indeterminated */
+
+/* Link Speed Current State */
+#define SK_LSPEED_STAT_UNKNOWN		1
+#define SK_LSPEED_STAT_10MBPS		2
+#define SK_LSPEED_STAT_100MBPS 		3
+#define SK_LSPEED_STAT_1000MBPS		4
+#define SK_LSPEED_STAT_INDETERMINATED 5
+
+
+/* Link Capability Parameter */
+#define SK_LMODE_CAP_HALF		(1<<0)	/* Half Duplex Mode */
+#define SK_LMODE_CAP_FULL		(1<<1)	/* Full Duplex Mode */
+#define SK_LMODE_CAP_AUTOHALF	(1<<2)	/* AutoHalf Duplex Mode */
+#define SK_LMODE_CAP_AUTOFULL	(1<<3)	/* AutoFull Duplex Mode */
+#define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */
+
+/* Link Mode Current State */
+#define SK_LMODE_STAT_UNKNOWN	1	/* Unknown Duplex Mode */
+#define SK_LMODE_STAT_HALF		2	/* Half Duplex Mode */
+#define SK_LMODE_STAT_FULL		3	/* Full Duplex Mode */
+#define SK_LMODE_STAT_AUTOHALF	4	/* Half Duplex Mode obtained by Auto-Neg */
+#define SK_LMODE_STAT_AUTOFULL	5	/* Full Duplex Mode obtained by Auto-Neg */
+#define SK_LMODE_STAT_INDETERMINATED 6	/* indeterminated */
+
+/* Flow Control Mode Parameter (and capabilities) */
+#define SK_FLOW_MODE_NONE		1	/* No Flow-Control */
+#define SK_FLOW_MODE_LOC_SEND	2	/* Local station sends PAUSE */
+#define SK_FLOW_MODE_SYMMETRIC	3	/* Both stations may send PAUSE */
+#define SK_FLOW_MODE_SYM_OR_REM	4	/* Both stations may send PAUSE or
+					 * just the remote station may send PAUSE
+					 */
+#define SK_FLOW_MODE_INDETERMINATED 5	/* indeterminated */
+
+/* Flow Control Status Parameter */
+#define SK_FLOW_STAT_NONE		1	/* No Flow Control */
+#define SK_FLOW_STAT_REM_SEND	2	/* Remote Station sends PAUSE */
+#define SK_FLOW_STAT_LOC_SEND	3	/* Local station sends PAUSE */
+#define SK_FLOW_STAT_SYMMETRIC	4	/* Both station may send PAUSE */
+#define SK_FLOW_STAT_INDETERMINATED 5	/* indeterminated */
+
+/* Master/Slave Mode Capabilities */
+#define SK_MS_CAP_AUTO		(1<<0)	/* Automatic resolution */
+#define SK_MS_CAP_MASTER	(1<<1)	/* This station is master */
+#define SK_MS_CAP_SLAVE		(1<<2)	/* This station is slave */
+#define SK_MS_CAP_INDETERMINATED (1<<3)	/* indeterminated */
+
+/* Set Master/Slave Mode Parameter (and capabilities) */
+#define SK_MS_MODE_AUTO		1	/* Automatic resolution */
+#define SK_MS_MODE_MASTER	2	/* This station is master */
+#define SK_MS_MODE_SLAVE	3	/* This station is slave */
+#define SK_MS_MODE_INDETERMINATED 4	/* indeterminated */
+
+/* Master/Slave Status Parameter */
+#define SK_MS_STAT_UNSET	1	/* The M/S status is not set */
+#define SK_MS_STAT_MASTER	2	/* This station is Master */
+#define SK_MS_STAT_SLAVE	3	/* This station is Dlave */
+#define SK_MS_STAT_FAULT	4	/* M/S resolution failed */
+#define SK_MS_STAT_INDETERMINATED 5	/* indeterminated */
+
+/* parameter 'Mode' when calling SkXmSetRxCmd() */
+#define SK_STRIP_FCS_ON		(1<<0)	/* Enable  FCS stripping of Rx frames */
+#define SK_STRIP_FCS_OFF	(1<<1)	/* Disable FCS stripping of Rx frames */
+#define SK_STRIP_PAD_ON		(1<<2)	/* Enable  pad byte stripping of Rx fr */
+#define SK_STRIP_PAD_OFF	(1<<3)	/* Disable pad byte stripping of Rx fr */
+#define SK_LENERR_OK_ON		(1<<4)	/* Don't chk fr for in range len error */
+#define SK_LENERR_OK_OFF	(1<<5)	/* Check frames for in range len error */
+#define SK_BIG_PK_OK_ON		(1<<6)	/* Don't set Rx Error bit for big frames */
+#define SK_BIG_PK_OK_OFF	(1<<7)	/* Set Rx Error bit for big frames */
+#define SK_SELF_RX_ON		(1<<8)	/* Enable  Rx of own packets */
+#define SK_SELF_RX_OFF		(1<<9)	/* Disable Rx of own packets */
+
+/* parameter 'Para' when calling SkMacSetRxTxEn() */
+#define SK_MAC_LOOPB_ON		(1<<0)	/* Enable  MAC Loopback Mode */
+#define SK_MAC_LOOPB_OFF	(1<<1)	/* Disable MAC Loopback Mode */
+#define SK_PHY_LOOPB_ON		(1<<2)	/* Enable  PHY Loopback Mode */
+#define SK_PHY_LOOPB_OFF	(1<<3)	/* Disable PHY Loopback Mode */
+#define SK_PHY_FULLD_ON		(1<<4)	/* Enable  GMII Full Duplex */
+#define SK_PHY_FULLD_OFF	(1<<5)	/* Disable GMII Full Duplex */
+
+/* States of PState */
+#define SK_PRT_RESET	0	/* the port is reset */
+#define SK_PRT_STOP		1	/* the port is stopped (similar to SW reset) */
+#define SK_PRT_INIT		2	/* the port is initialized */
+#define SK_PRT_RUN		3	/* the port has an active link */
+
+/* Default receive frame limit for Workaround of XMAC Errata */
+#define SK_DEF_RX_WA_LIM	SK_CONSTU64(100)
+
+/* Link Partner Status */
+#define SK_LIPA_UNKNOWN	0	/* Link partner is in unknown state */
+#define SK_LIPA_MANUAL	1	/* Link partner is in detected manual state */
+#define SK_LIPA_AUTO	2	/* Link partner is in auto-negotiation state */
+
+/* Maximum Restarts before restart is ignored (3Com WA) */
+#define SK_MAX_LRESTART	3	/* Max. 3 times the link is restarted */
+
+/* Max. Auto-neg. timeouts before link detection in sense mode is reset */
+#define SK_MAX_ANEG_TO	10	/* Max. 10 times the sense mode is reset */
+
+/* structures *****************************************************************/
+
+/*
+ * MAC specific functions
+ */
+typedef struct s_GeMacFunc {
+	int  (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
+	int  (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
+							SK_U16 StatAddr, SK_U32 *pVal);
+	int  (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
+	int  (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
+						   SK_U16 IStatus, SK_U64 *pVal);
+} SK_GEMACFUNC;
+
+/*
+ * Port Structure
+ */
+typedef	struct s_GePort {
+#ifndef SK_DIAG
+	SK_TIMER	PWaTimer;	/* Workaround Timer */
+	SK_TIMER	HalfDupChkTimer;
+#endif /* SK_DIAG */
+	SK_U32	PPrevShorts;	/* Previous short Counter checking */
+	SK_U32	PPrevFcs;		/* Previous FCS Error Counter checking */
+	SK_U64	PPrevRx;		/* Previous RxOk Counter checking */
+	SK_U64	PRxLim;			/* Previous RxOk Counter checking */
+	SK_U64	LastOctets;		/* For half duplex hang check */
+	int		PLinkResCt;		/* Link Restart Counter */
+	int		PAutoNegTimeOut;/* Auto-negotiation timeout current value */
+	int		PAutoNegTOCt;	/* Auto-negotiation Timeout Counter */
+	int		PRxQSize;		/* Port Rx Queue Size in kB */
+	int		PXSQSize;		/* Port Synchronous  Transmit Queue Size in kB */
+	int		PXAQSize;		/* Port Asynchronous Transmit Queue Size in kB */
+	SK_U32	PRxQRamStart;	/* Receive Queue RAM Buffer Start Address */
+	SK_U32	PRxQRamEnd;		/* Receive Queue RAM Buffer End Address */
+	SK_U32	PXsQRamStart;	/* Sync Tx Queue RAM Buffer Start Address */
+	SK_U32	PXsQRamEnd;		/* Sync Tx Queue RAM Buffer End Address */
+	SK_U32	PXaQRamStart;	/* Async Tx Queue RAM Buffer Start Address */
+	SK_U32	PXaQRamEnd;		/* Async Tx Queue RAM Buffer End Address */
+	SK_U32	PRxOverCnt;		/* Receive Overflow Counter */
+	int		PRxQOff;		/* Rx Queue Address Offset */
+	int		PXsQOff;		/* Synchronous Tx Queue Address Offset */
+	int		PXaQOff;		/* Asynchronous Tx Queue Address Offset */
+	int		PhyType;		/* PHY used on this port */
+	SK_U16	PhyId1;			/* PHY Id1 on this port */
+	SK_U16	PhyAddr;		/* MDIO/MDC PHY address */
+	SK_U16	PIsave;			/* Saved Interrupt status word */
+	SK_U16	PSsave;			/* Saved PHY status word */
+	SK_BOOL	PHWLinkUp;		/* The hardware Link is up (wiring) */
+	SK_BOOL	PState;			/* Is port initialized ? */
+	SK_BOOL	PLinkBroken;	/* Is Link broken ? */
+	SK_BOOL	PCheckPar;		/* Do we check for parity errors ? */
+	SK_BOOL	HalfDupTimerActive;
+	SK_U8	PLinkCap;		/* Link Capabilities */
+	SK_U8	PLinkModeConf;	/* Link Mode configured */
+	SK_U8	PLinkMode;		/* Link Mode currently used */
+	SK_U8	PLinkModeStatus;/* Link Mode Status */
+	SK_U8	PLinkSpeedCap;	/* Link Speed Capabilities(10/100/1000 Mbps) */
+	SK_U8	PLinkSpeed;		/* configured Link Speed (10/100/1000 Mbps) */
+	SK_U8	PLinkSpeedUsed;	/* current Link Speed (10/100/1000 Mbps) */
+	SK_U8	PFlowCtrlCap;	/* Flow Control Capabilities */
+	SK_U8	PFlowCtrlMode;	/* Flow Control Mode */
+	SK_U8	PFlowCtrlStatus;/* Flow Control Status */
+	SK_U8	PMSCap;			/* Master/Slave Capabilities */
+	SK_U8	PMSMode;		/* Master/Slave Mode */
+	SK_U8	PMSStatus;		/* Master/Slave Status */
+	SK_U8	PAutoNegFail;	/* Auto-negotiation fail flag */
+	SK_U8	PLipaAutoNeg;	/* Auto-negotiation possible with Link Partner */
+	SK_U8	PCableLen;		/* Cable Length */
+	SK_U8	PMdiPairLen[4];	/* MDI[0..3] Pair Length */
+	SK_U8	PMdiPairSts[4];	/* MDI[0..3] Pair Diagnostic Status */
+} SK_GEPORT;
+
+/*
+ * Gigabit Ethernet Initialization Struct
+ * (has to be included in the adapter context)
+ */
+typedef	struct s_GeInit {
+	SK_U8		GIPciHwRev;		/* PCI HW Revision Number */
+	SK_U8		GIChipId;		/* Chip Identification Number */
+	SK_U8		GIChipRev;		/* Chip Revision Number */
+	SK_BOOL		GIGenesis;		/* Genesis adapter ? */
+	SK_BOOL		GICopperType;	/* Copper Type adapter ? */
+	SK_BOOL		GIPciSlot64;	/* 64-bit PCI Slot */
+	SK_BOOL		GIPciClock66;	/* 66 MHz PCI Clock */
+	SK_BOOL		GIVauxAvail;	/* VAUX available (YUKON) */
+	SK_BOOL		GIYukon32Bit;	/* 32-Bit YUKON adapter */
+	SK_BOOL		GIYukonLite;	/* YUKON-Lite chip */
+	int			GIMacsFound;	/* Number of MACs found on this adapter */
+	int			GIMacType;		/* MAC Type used on this adapter */
+	int			GIHstClkFact;	/* Host Clock Factor (62.5 / HstClk * 100) */
+	int			GIPortUsage;	/* Driver Port Usage */
+	int			GILevel;		/* Initialization Level completed */
+	int			GIRamSize;		/* The RAM size of the adapter in kB */
+	int			GIWolOffs;		/* WOL Register Offset (HW-Bug in Rev. A) */
+	SK_U32		GIRamOffs;		/* RAM Address Offset for addr calculation */
+	SK_U32		GIPollTimerVal;	/* Descr. Poll Timer Init Val (HstClk ticks) */
+	SK_GEPORT	GP[SK_MAX_MACS];/* Port Dependent Information */
+	SK_GEMACFUNC GIFunc;		/* MAC depedent functions */
+} SK_GEINIT;
+
+/*
+ * Error numbers and messages for skxmac2.c and skgeinit.c
+ */
+#define SKERR_HWI_E001		(SK_ERRBASE_HWINIT)
+#define SKERR_HWI_E001MSG	"SkXmClrExactAddr() has got illegal parameters"
+#define SKERR_HWI_E002		(SKERR_HWI_E001+1)
+#define SKERR_HWI_E002MSG	"SkGeInit(): Level 1 call missing"
+#define SKERR_HWI_E003		(SKERR_HWI_E002+1)
+#define SKERR_HWI_E003MSG	"SkGeInit() called with illegal init Level"
+#define SKERR_HWI_E004		(SKERR_HWI_E003+1)
+#define SKERR_HWI_E004MSG	"SkGeInitPort(): Queue Size illegal configured"
+#define SKERR_HWI_E005		(SKERR_HWI_E004+1)
+#define SKERR_HWI_E005MSG	"SkGeInitPort(): cannot init running ports"
+#define SKERR_HWI_E006		(SKERR_HWI_E005+1)
+#define SKERR_HWI_E006MSG	"SkGeMacInit(): PState does not match HW state"
+#define SKERR_HWI_E007		(SKERR_HWI_E006+1)
+#define SKERR_HWI_E007MSG	"SkXmInitDupMd() called with invalid Dup Mode"
+#define SKERR_HWI_E008		(SKERR_HWI_E007+1)
+#define SKERR_HWI_E008MSG	"SkXmSetRxCmd() called with invalid Mode"
+#define SKERR_HWI_E009		(SKERR_HWI_E008+1)
+#define SKERR_HWI_E009MSG	"SkGeCfgSync() called although PXSQSize zero"
+#define SKERR_HWI_E010		(SKERR_HWI_E009+1)
+#define SKERR_HWI_E010MSG	"SkGeCfgSync() called with invalid parameters"
+#define SKERR_HWI_E011		(SKERR_HWI_E010+1)
+#define SKERR_HWI_E011MSG	"SkGeInitPort(): Receive Queue Size too small"
+#define SKERR_HWI_E012		(SKERR_HWI_E011+1)
+#define SKERR_HWI_E012MSG	"SkGeInitPort(): invalid Queue Size specified"
+#define SKERR_HWI_E013		(SKERR_HWI_E012+1)
+#define SKERR_HWI_E013MSG	"SkGeInitPort(): cfg changed for running queue"
+#define SKERR_HWI_E014		(SKERR_HWI_E013+1)
+#define SKERR_HWI_E014MSG	"SkGeInitPort(): unknown GIPortUsage specified"
+#define SKERR_HWI_E015		(SKERR_HWI_E014+1)
+#define SKERR_HWI_E015MSG	"Illegal Link mode parameter"
+#define SKERR_HWI_E016		(SKERR_HWI_E015+1)
+#define SKERR_HWI_E016MSG	"Illegal Flow control mode parameter"
+#define SKERR_HWI_E017		(SKERR_HWI_E016+1)
+#define SKERR_HWI_E017MSG	"Illegal value specified for GIPollTimerVal"
+#define SKERR_HWI_E018		(SKERR_HWI_E017+1)
+#define SKERR_HWI_E018MSG	"FATAL: SkGeStopPort() does not terminate (Tx)"
+#define SKERR_HWI_E019		(SKERR_HWI_E018+1)
+#define SKERR_HWI_E019MSG	"Illegal Speed parameter"
+#define SKERR_HWI_E020		(SKERR_HWI_E019+1)
+#define SKERR_HWI_E020MSG	"Illegal Master/Slave parameter"
+#define SKERR_HWI_E021		(SKERR_HWI_E020+1)
+#define	SKERR_HWI_E021MSG	"MacUpdateStats(): cannot update statistic counter"
+#define	SKERR_HWI_E022		(SKERR_HWI_E021+1)
+#define	SKERR_HWI_E022MSG	"MacStatistic(): illegal statistic base address"
+#define SKERR_HWI_E023		(SKERR_HWI_E022+1)
+#define SKERR_HWI_E023MSG	"SkGeInitPort(): Transmit Queue Size too small"
+#define SKERR_HWI_E024		(SKERR_HWI_E023+1)
+#define SKERR_HWI_E024MSG	"FATAL: SkGeStopPort() does not terminate (Rx)"
+#define SKERR_HWI_E025		(SKERR_HWI_E024+1)
+#define SKERR_HWI_E025MSG	""
+
+/* function prototypes ********************************************************/
+
+#ifndef	SK_KR_PROTO
+
+/*
+ * public functions in skgeinit.c
+ */
+extern void	SkGePollRxD(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	PollRxD);
+
+extern void	SkGePollTxD(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL PollTxD);
+
+extern void	SkGeYellowLED(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		State);
+
+extern int	SkGeCfgSync(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_U32	IntTime,
+	SK_U32	LimCount,
+	int		SyncMode);
+
+extern void	SkGeLoadLnkSyncCnt(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_U32	CntVal);
+
+extern void	SkGeStopPort(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Dir,
+	int		RstMode);
+
+extern int	SkGeInit(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Level);
+
+extern void	SkGeDeInit(
+	SK_AC	*pAC,
+	SK_IOC	IoC);
+
+extern int	SkGeInitPort(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkGeXmitLED(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Led,
+	int		Mode);
+
+extern void	SkGeInitRamIface(
+	SK_AC	*pAC,
+	SK_IOC	IoC);
+
+extern int	SkGeInitAssignRamToQueues(
+	SK_AC	*pAC,
+	int		ActivePort,
+	SK_BOOL	DualNet);
+
+/*
+ * public functions in skxmac2.c
+ */
+extern void SkMacRxTxDisable(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkMacSoftRst(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkMacHardRst(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkXmInitMac(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkGmInitMac(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void SkMacInitPhy(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	DoLoop);
+
+extern void SkMacIrqDisable(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkMacFlushTxFifo(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkMacFlushRxFifo(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkMacIrq(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern int	SkMacAutoNegDone(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkMacAutoNegLipaPhy(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_U16	IStatus);
+
+extern void  SkMacSetRxTxEn(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Para);
+
+extern int  SkMacRxTxEnable(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkMacPromiscMode(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	Enable);
+
+extern void	SkMacHashing(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	Enable);
+
+extern void	SkXmPhyRead(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Addr,
+	SK_U16	*pVal);
+
+extern void	SkXmPhyWrite(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Addr,
+	SK_U16	Val);
+
+extern void	SkGmPhyRead(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Addr,
+	SK_U16	*pVal);
+
+extern void	SkGmPhyWrite(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Addr,
+	SK_U16	Val);
+
+extern void	SkGePhyRead(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Addr,
+	SK_U16	*pVal);
+
+extern void	SkGePhyWrite(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Addr,
+	SK_U16	Val);
+
+extern void	SkXmClrExactAddr(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		StartNum,
+	int		StopNum);
+
+extern void	SkXmInitDupMd(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkXmInitPauseMd(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkXmAutoNegLipaXmac(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_U16	IStatus);
+
+extern int SkXmUpdateStats(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port);
+
+extern int SkGmUpdateStats(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port);
+
+extern int SkXmMacStatistic(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port,
+	SK_U16	StatAddr,
+	SK_U32	*pVal);
+
+extern int SkGmMacStatistic(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port,
+	SK_U16	StatAddr,
+	SK_U32	*pVal);
+
+extern int SkXmResetCounter(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port);
+
+extern int SkGmResetCounter(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port);
+
+extern int SkXmOverflowStatus(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port,
+	SK_U16  IStatus,
+	SK_U64	*pStatus);
+
+extern int SkGmOverflowStatus(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port,
+	SK_U16	MacStatus,
+	SK_U64	*pStatus);
+
+extern int SkGmCableDiagStatus(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	StartTest);
+
+#ifdef SK_DIAG
+extern void	SkMacSetRxCmd(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Mode);
+extern void	SkMacCrcGener(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	Enable);
+extern void	SkMacTimeStamp(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	Enable);
+extern void	SkXmSendCont(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	Enable);
+#endif /* SK_DIAG */
+
+#else	/* SK_KR_PROTO */
+
+/*
+ * public functions in skgeinit.c
+ */
+extern void	SkGePollRxD();
+extern void	SkGePollTxD();
+extern void	SkGeYellowLED();
+extern int	SkGeCfgSync();
+extern void	SkGeLoadLnkSyncCnt();
+extern void	SkGeStopPort();
+extern int	SkGeInit();
+extern void	SkGeDeInit();
+extern int	SkGeInitPort();
+extern void	SkGeXmitLED();
+extern void	SkGeInitRamIface();
+extern int	SkGeInitAssignRamToQueues();
+
+/*
+ * public functions in skxmac2.c
+ */
+extern void SkMacRxTxDisable();
+extern void	SkMacSoftRst();
+extern void	SkMacHardRst();
+extern void SkMacInitPhy();
+extern int  SkMacRxTxEnable();
+extern void SkMacPromiscMode();
+extern void SkMacHashing();
+extern void SkMacIrqDisable();
+extern void	SkMacFlushTxFifo();
+extern void	SkMacFlushRxFifo();
+extern void	SkMacIrq();
+extern int	SkMacAutoNegDone();
+extern void	SkMacAutoNegLipaPhy();
+extern void SkMacSetRxTxEn();
+extern void	SkGePhyRead();
+extern void	SkGePhyWrite();
+extern void	SkXmInitMac();
+extern void	SkXmPhyRead();
+extern void	SkXmPhyWrite();
+extern void	SkGmInitMac();
+extern void	SkGmPhyRead();
+extern void	SkGmPhyWrite();
+extern void	SkXmClrExactAddr();
+extern void	SkXmInitDupMd();
+extern void	SkXmInitPauseMd();
+extern void	SkXmAutoNegLipaXmac();
+extern int	SkXmUpdateStats();
+extern int	SkGmUpdateStats();
+extern int	SkXmMacStatistic();
+extern int	SkGmMacStatistic();
+extern int	SkXmResetCounter();
+extern int	SkGmResetCounter();
+extern int	SkXmOverflowStatus();
+extern int	SkGmOverflowStatus();
+extern int	SkGmCableDiagStatus();
+
+#ifdef SK_DIAG
+extern void	SkMacSetRxCmd();
+extern void	SkMacCrcGener();
+extern void	SkMacTimeStamp();
+extern void	SkXmSendCont();
+#endif /* SK_DIAG */
+
+#endif	/* SK_KR_PROTO */
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
+
+#endif	/* __INC_SKGEINIT_H_ */
diff --git a/drivers/net/sk98lin/h/skgepnm2.h b/drivers/net/sk98lin/h/skgepnm2.h
new file mode 100644
index 0000000..5c44f47
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgepnm2.h
@@ -0,0 +1,462 @@
+/*****************************************************************************
+ *
+ * Name:	skgepnm2.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.34 $
+ * Date:	$Date: 2002/12/16 09:05:18 $
+ * Purpose:	Defines for Private Network Management Interface
+ *
+ ****************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2001 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skgepnm2.h,v $
+ *	Revision 1.34  2002/12/16 09:05:18  tschilli
+ *	Code for VCT handling added.
+ *
+ *	Revision 1.33  2002/09/10 09:00:03  rwahl
+ *	Adapted boolean definitions according sktypes.
+ *
+ *	Revision 1.32  2002/08/09 09:47:01  rwahl
+ *	Added write-only flag to oid access defines.
+ *	Editorial changes.
+ *
+ *	Revision 1.31  2002/07/17 19:23:18  rwahl
+ *	- Replaced MAC counter definitions by enumeration.
+ *	- Added definition SK_PNMI_MAC_TYPES.
+ *	- Added chipset defnition for Yukon.
+ *
+ *	Revision 1.30  2001/02/06 10:03:41  mkunz
+ *	- Pnmi V4 dual net support added. Interface functions and macros extended
+ *	- Vpd bug fixed
+ *	- OID_SKGE_MTU added
+ *
+ *	Revision 1.29  2001/01/22 13:41:37  rassmann
+ *	Supporting two nets on dual-port adapters.
+ *
+ *	Revision 1.28  2000/08/03 15:12:48  rwahl
+ *	- Additional comment for MAC statistic data structure.
+ *
+ *	Revision 1.27  2000/08/01 16:10:18  rwahl
+ *	- Added mac statistic data structure for StatRxLongFrame counter.
+ *
+ *	Revision 1.26  2000/03/31 13:51:34  rwahl
+ *	Added SK_UPTR cast to offset calculation for PNMI struct fields;
+ *	missing cast caused compiler warnings by Win64 compiler.
+ *
+ *	Revision 1.25  1999/11/22 13:57:41  cgoos
+ *	Changed license header to GPL.
+ *	Allowing overwrite for SK_PNMI_STORE/_READ defines.
+ *
+ *	Revision 1.24  1999/04/13 15:11:11  mhaveman
+ *	Changed copyright.
+ *
+ *	Revision 1.23  1999/01/28 15:07:12  mhaveman
+ *	Changed default threshold for port switches per hour from 10
+ *	to 240 which means 4 switches per minute. This fits better
+ *	the granularity of 32 for the port switch estimate
+ *	counter.
+ *
+ *	Revision 1.22  1999/01/05 12:52:30  mhaveman
+ *	Removed macro SK_PNMI_MICRO_SEC.
+ *
+ *	Revision 1.21  1999/01/05 12:50:34  mhaveman
+ *	Enlarged macro definition SK_PNMI_HUNDREDS_SEC() so that no 64-bit
+ *	arithmetic is necessary if SK_TICKS_PER_SEC is 100.
+ *
+ *	Revision 1.20  1998/12/09 14:02:53  mhaveman
+ *	Defined macro SK_PNMI_DEF_RLMT_CHG_THRES for default port switch
+ *	threshold.
+ *
+ *	Revision 1.19  1998/12/03 11:28:41  mhaveman
+ *	Removed SK_PNMI_CHECKPTR macro.
+ *
+ *	Revision 1.18  1998/12/03 11:21:00  mhaveman
+ *	-Added pointer check macro SK_PNMI_CHECKPTR
+ *	-Added macros SK_PNMI_VPD_ARR_SIZE and SK_PNMI_VPD_STR_SIZE for
+ *	 VPD key evaluation.
+ *
+ *	Revision 1.17  1998/11/20 13:20:33  mhaveman
+ *	Fixed bug in SK_PNMI_SET_STAT macro. ErrorStatus was not correctly set.
+ *
+ *	Revision 1.16  1998/11/20 08:08:49  mhaveman
+ *	Macro SK_PNMI_CHECKFLAGS has got a if clause.
+ *
+ *	Revision 1.15  1998/11/03 13:53:40  mhaveman
+ *	Fixed alignment problem in macor SK_PNMI_SET_STAT macro.
+ *
+ *	Revision 1.14  1998/10/30 15:50:13  mhaveman
+ *	Added macro SK_PNMI_MICRO_SEC()
+ *
+ *	Revision 1.13  1998/10/30 12:32:20  mhaveman
+ *	Added forgotten cast in SK_PNMI_READ_U32 macro.
+ *
+ *	Revision 1.12  1998/10/29 15:40:26  mhaveman
+ *	-Changed SK_PNMI_TRAP_SENSOR_LEN because SensorDescr has now
+ *	 variable string length.
+ *	-Defined SK_PNMI_CHECKFLAGS macro
+ *
+ *	Revision 1.11  1998/10/29 08:53:34  mhaveman
+ *	Removed SK_PNMI_RLM_XXX table indexed because these counters need
+ *	not been saved over XMAC resets.
+ *
+ *	Revision 1.10  1998/10/28 08:48:20  mhaveman
+ *	-Added macros for storage according to alignment
+ *	-Changed type of Instance to SK_U32 because of VPD
+ *	-Removed trap structures. Not needed because of alignment problem
+ *	-Changed type of Action form SK_U8 to int
+ *
+ *	Revision 1.9  1998/10/21 13:34:45  mhaveman
+ *	Shit, mismatched calculation of SK_PNMI_HUNDREDS_SEC. Corrected.
+ *
+ *	Revision 1.8  1998/10/21 13:24:58  mhaveman
+ *	Changed calculation of hundreds of seconds.
+ *
+ *	Revision 1.7  1998/10/20 07:31:41  mhaveman
+ *	Made type changes to unsigned int where possible.
+ *
+ *	Revision 1.6  1998/09/04 17:04:05  mhaveman
+ *	Added Sync counters to offset storage to provided settled values on
+ *	port switch.
+ *
+ *	Revision 1.5  1998/09/04 12:45:35  mhaveman
+ *	Removed dummies for SK_DRIVER_ macros. They should be added by driver
+ *	writer in skdrv2nd.h.
+ *
+ *	Revision 1.4  1998/09/04 11:59:50  mhaveman
+ *	Everything compiles now. Driver Macros for counting still missing.
+ *
+ *	Revision 1.3  1998/08/24 12:01:35  mhaveman
+ *	Intermediate state.
+ *
+ *	Revision 1.2  1998/08/17 07:51:40  mhaveman
+ *	Intermediate state.
+ *
+ *	Revision 1.1  1998/08/11 09:08:40  mhaveman
+ *	Intermediate state.
+ *
+ ****************************************************************************/
+
+#ifndef _SKGEPNM2_H_
+#define _SKGEPNM2_H_
+
+/*
+ * General definitions
+ */
+#define SK_PNMI_CHIPSET_XMAC	1	/* XMAC11800FP */
+#define SK_PNMI_CHIPSET_YUKON	2	/* YUKON */
+
+#define	SK_PNMI_BUS_PCI		1	/* PCI bus*/
+
+/*
+ * Actions
+ */
+#define SK_PNMI_ACT_IDLE		1
+#define SK_PNMI_ACT_RESET		2
+#define SK_PNMI_ACT_SELFTEST	3
+#define SK_PNMI_ACT_RESETCNT	4
+
+/*
+ * VPD releated defines
+ */
+
+#define SK_PNMI_VPD_RW		1
+#define SK_PNMI_VPD_RO		2
+
+#define SK_PNMI_VPD_OK			0
+#define SK_PNMI_VPD_NOTFOUND	1
+#define SK_PNMI_VPD_CUT			2
+#define SK_PNMI_VPD_TIMEOUT		3
+#define SK_PNMI_VPD_FULL		4
+#define SK_PNMI_VPD_NOWRITE		5
+#define SK_PNMI_VPD_FATAL		6
+
+#define SK_PNMI_VPD_IGNORE	0
+#define SK_PNMI_VPD_CREATE	1
+#define SK_PNMI_VPD_DELETE	2
+
+
+/*
+ * RLMT related defines
+ */
+#define SK_PNMI_DEF_RLMT_CHG_THRES	240	/* 4 changes per minute */
+
+
+/*
+ * VCT internal status values
+ */
+#define SK_PNMI_VCT_PENDING	32
+#define SK_PNMI_VCT_TEST_DONE	64
+#define SK_PNMI_VCT_LINK	128
+
+/*
+ * Internal table definitions
+ */
+#define SK_PNMI_GET		0
+#define SK_PNMI_PRESET	1
+#define SK_PNMI_SET		2
+
+#define SK_PNMI_RO		0
+#define SK_PNMI_RW		1
+#define SK_PNMI_WO		2
+
+typedef struct s_OidTabEntry {
+	SK_U32			Id;
+	SK_U32			InstanceNo;
+	unsigned int	StructSize;
+	unsigned int	Offset;
+	int				Access;
+	int				(* Func)(SK_AC *pAc, SK_IOC pIo, int action,
+							 SK_U32 Id, char* pBuf, unsigned int* pLen,
+							 SK_U32 Instance, unsigned int TableIndex,
+							 SK_U32 NetNumber);
+	SK_U16			Param;
+} SK_PNMI_TAB_ENTRY;
+
+
+/*
+ * Trap lengths
+ */
+#define SK_PNMI_TRAP_SIMPLE_LEN			17
+#define SK_PNMI_TRAP_SENSOR_LEN_BASE	46
+#define SK_PNMI_TRAP_RLMT_CHANGE_LEN	23
+#define SK_PNMI_TRAP_RLMT_PORT_LEN		23
+
+/*
+ * Number of MAC types supported
+ */
+#define SK_PNMI_MAC_TYPES	(SK_MAC_GMAC + 1)
+
+/*
+ * MAC statistic data list (overall set for MAC types used)
+ */
+enum SK_MACSTATS {
+	SK_PNMI_HTX				= 0,
+	SK_PNMI_HTX_OCTET,
+	SK_PNMI_HTX_OCTETHIGH 	= SK_PNMI_HTX_OCTET,
+	SK_PNMI_HTX_OCTETLOW,
+	SK_PNMI_HTX_BROADCAST,
+	SK_PNMI_HTX_MULTICAST,
+	SK_PNMI_HTX_UNICAST,
+	SK_PNMI_HTX_BURST,
+	SK_PNMI_HTX_PMACC,
+	SK_PNMI_HTX_MACC,
+	SK_PNMI_HTX_COL,
+	SK_PNMI_HTX_SINGLE_COL,
+	SK_PNMI_HTX_MULTI_COL,
+	SK_PNMI_HTX_EXCESS_COL,
+	SK_PNMI_HTX_LATE_COL,
+	SK_PNMI_HTX_DEFFERAL,
+	SK_PNMI_HTX_EXCESS_DEF,
+	SK_PNMI_HTX_UNDERRUN,
+	SK_PNMI_HTX_CARRIER,
+	SK_PNMI_HTX_UTILUNDER,
+	SK_PNMI_HTX_UTILOVER,
+	SK_PNMI_HTX_64,
+	SK_PNMI_HTX_127,
+	SK_PNMI_HTX_255,
+	SK_PNMI_HTX_511,
+	SK_PNMI_HTX_1023,
+	SK_PNMI_HTX_MAX,
+	SK_PNMI_HTX_LONGFRAMES,
+	SK_PNMI_HTX_SYNC,
+	SK_PNMI_HTX_SYNC_OCTET,
+	SK_PNMI_HTX_RESERVED,
+
+	SK_PNMI_HRX,
+	SK_PNMI_HRX_OCTET,
+	SK_PNMI_HRX_OCTETHIGH	= SK_PNMI_HRX_OCTET,
+	SK_PNMI_HRX_OCTETLOW,
+	SK_PNMI_HRX_BADOCTET,
+	SK_PNMI_HRX_BADOCTETHIGH = SK_PNMI_HRX_BADOCTET,
+	SK_PNMI_HRX_BADOCTETLOW,
+	SK_PNMI_HRX_BROADCAST,
+	SK_PNMI_HRX_MULTICAST,
+	SK_PNMI_HRX_UNICAST,
+	SK_PNMI_HRX_PMACC,
+	SK_PNMI_HRX_MACC,
+	SK_PNMI_HRX_PMACC_ERR,
+	SK_PNMI_HRX_MACC_UNKWN,
+	SK_PNMI_HRX_BURST,
+	SK_PNMI_HRX_MISSED,
+	SK_PNMI_HRX_FRAMING,
+	SK_PNMI_HRX_UNDERSIZE,
+	SK_PNMI_HRX_OVERFLOW,
+	SK_PNMI_HRX_JABBER,
+	SK_PNMI_HRX_CARRIER,
+	SK_PNMI_HRX_IRLENGTH,
+	SK_PNMI_HRX_SYMBOL,
+	SK_PNMI_HRX_SHORTS,
+	SK_PNMI_HRX_RUNT,
+	SK_PNMI_HRX_TOO_LONG,
+	SK_PNMI_HRX_FCS,
+	SK_PNMI_HRX_CEXT,
+	SK_PNMI_HRX_UTILUNDER,
+	SK_PNMI_HRX_UTILOVER,
+	SK_PNMI_HRX_64,
+	SK_PNMI_HRX_127,
+	SK_PNMI_HRX_255,
+	SK_PNMI_HRX_511,
+	SK_PNMI_HRX_1023,
+	SK_PNMI_HRX_MAX,
+	SK_PNMI_HRX_LONGFRAMES,
+
+	SK_PNMI_HRX_RESERVED,
+
+	SK_PNMI_MAX_IDX		/* NOTE: Ensure SK_PNMI_CNT_NO is set to this value */
+};
+
+/*
+ * MAC specific data
+ */
+typedef struct s_PnmiStatAddr {
+	SK_U16		Reg;		/* MAC register containing the value */
+	SK_BOOL		GetOffset;	/* TRUE: Offset managed by PNMI (call GetStatVal())*/
+} SK_PNMI_STATADDR;
+
+
+/*
+ * SK_PNMI_STRUCT_DATA copy offset evaluation macros
+ */
+#define SK_PNMI_OFF(e)		((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e))
+#define SK_PNMI_MAI_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e))
+#define SK_PNMI_VPD_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_VPD *)0)->e))
+#define SK_PNMI_SEN_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_SENSOR *)0)->e))
+#define SK_PNMI_CHK_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_CHECKSUM *)0)->e))
+#define SK_PNMI_STA_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_STAT *)0)->e))
+#define SK_PNMI_CNF_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_CONF *)0)->e))
+#define SK_PNMI_RLM_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT *)0)->e))
+#define SK_PNMI_MON_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT_MONITOR *)0)->e))
+#define SK_PNMI_TRP_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_TRAP *)0)->e))
+
+#define SK_PNMI_SET_STAT(b,s,o)	{SK_U32	Val32; char *pVal; \
+					Val32 = (s); \
+					pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \
+						&(((SK_PNMI_STRUCT_DATA *)0)-> \
+						ReturnStatus.ErrorStatus)); \
+					SK_PNMI_STORE_U32(pVal, Val32); \
+					Val32 = (o); \
+					pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \
+						&(((SK_PNMI_STRUCT_DATA *)0)-> \
+						ReturnStatus.ErrorOffset)); \
+					SK_PNMI_STORE_U32(pVal, Val32);}
+
+/*
+ * Time macros
+ */
+#if SK_TICKS_PER_SEC == 100
+#define SK_PNMI_HUNDREDS_SEC(t)	(t)
+#else
+#define SK_PNMI_HUNDREDS_SEC(t)	(((t) * 100) / (SK_TICKS_PER_SEC))
+#endif
+
+/*
+ * Macros to work around alignment problems
+ */
+#ifndef SK_PNMI_STORE_U16
+#define SK_PNMI_STORE_U16(p,v)	{*(char *)(p) = *((char *)&(v)); \
+					*((char *)(p) + 1) = \
+						*(((char *)&(v)) + 1);}
+#endif
+
+#ifndef SK_PNMI_STORE_U32
+#define SK_PNMI_STORE_U32(p,v)	{*(char *)(p) = *((char *)&(v)); \
+					*((char *)(p) + 1) = \
+						*(((char *)&(v)) + 1); \
+					*((char *)(p) + 2) = \
+						*(((char *)&(v)) + 2); \
+					*((char *)(p) + 3) = \
+						*(((char *)&(v)) + 3);}
+#endif
+
+#ifndef SK_PNMI_STORE_U64
+#define SK_PNMI_STORE_U64(p,v)	{*(char *)(p) = *((char *)&(v)); \
+					*((char *)(p) + 1) = \
+						*(((char *)&(v)) + 1); \
+					*((char *)(p) + 2) = \
+						*(((char *)&(v)) + 2); \
+					*((char *)(p) + 3) = \
+						*(((char *)&(v)) + 3); \
+					*((char *)(p) + 4) = \
+						*(((char *)&(v)) + 4); \
+					*((char *)(p) + 5) = \
+						*(((char *)&(v)) + 5); \
+					*((char *)(p) + 6) = \
+						*(((char *)&(v)) + 6); \
+					*((char *)(p) + 7) = \
+						*(((char *)&(v)) + 7);}
+#endif
+
+#ifndef SK_PNMI_READ_U16
+#define SK_PNMI_READ_U16(p,v)	{*((char *)&(v)) = *(char *)(p); \
+					*(((char *)&(v)) + 1) = \
+						*((char *)(p) + 1);}
+#endif
+
+#ifndef SK_PNMI_READ_U32
+#define SK_PNMI_READ_U32(p,v)	{*((char *)&(v)) = *(char *)(p); \
+					*(((char *)&(v)) + 1) = \
+						*((char *)(p) + 1); \
+					*(((char *)&(v)) + 2) = \
+						*((char *)(p) + 2); \
+					*(((char *)&(v)) + 3) = \
+						*((char *)(p) + 3);}
+#endif
+
+#ifndef SK_PNMI_READ_U64
+#define SK_PNMI_READ_U64(p,v)	{*((char *)&(v)) = *(char *)(p); \
+					*(((char *)&(v)) + 1) = \
+						*((char *)(p) + 1); \
+					*(((char *)&(v)) + 2) = \
+						*((char *)(p) + 2); \
+					*(((char *)&(v)) + 3) = \
+						*((char *)(p) + 3); \
+					*(((char *)&(v)) + 4) = \
+						*((char *)(p) + 4); \
+					*(((char *)&(v)) + 5) = \
+						*((char *)(p) + 5); \
+					*(((char *)&(v)) + 6) = \
+						*((char *)(p) + 6); \
+					*(((char *)&(v)) + 7) = \
+						*((char *)(p) + 7);}
+#endif
+
+/*
+ * Macros for Debug
+ */
+#ifdef DEBUG
+
+#define SK_PNMI_CHECKFLAGS(vSt)	{if (pAC->Pnmi.MacUpdatedFlag > 0 || \
+					pAC->Pnmi.RlmtUpdatedFlag > 0 || \
+					pAC->Pnmi.SirqUpdatedFlag > 0) { \
+						SK_DBG_MSG(pAC, \
+						SK_DBGMOD_PNMI, \
+						SK_DBGCAT_CTRL,	\
+						("PNMI: ERR: %s MacUFlag=%d, RlmtUFlag=%d, SirqUFlag=%d\n", \
+						vSt, \
+						pAC->Pnmi.MacUpdatedFlag, \
+						pAC->Pnmi.RlmtUpdatedFlag, \
+						pAC->Pnmi.SirqUpdatedFlag))}}
+
+#else	/* !DEBUG */
+
+#define SK_PNMI_CHECKFLAGS(vSt)	/* Nothing */
+
+#endif	/* !DEBUG */
+
+#endif	/* _SKGEPNM2_H_ */
diff --git a/drivers/net/sk98lin/h/skgepnmi.h b/drivers/net/sk98lin/h/skgepnmi.h
new file mode 100644
index 0000000..7532313
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgepnmi.h
@@ -0,0 +1,1114 @@
+/*****************************************************************************
+ *
+ * Name:	skgepnmi.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.59 $
+ * Date:	$Date: 2002/12/16 14:03:50 $
+ * Purpose:	Defines for Private Network Management Interface
+ *
+ ****************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2001 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skgepnmi.h,v $
+ *	Revision 1.59  2002/12/16 14:03:50  tschilli
+ *	New defines for VCT added.
+ *
+ *	Revision 1.58  2002/12/16 09:04:59  tschilli
+ *	Code for VCT handling added.
+ *
+ *	Revision 1.57  2002/09/26 12:41:05  tschilli
+ *	SK_PNMI_PORT BufPort entry in struct SK_PNMI added.
+ *
+ *	Revision 1.56  2002/08/16 11:10:41  rwahl
+ *	- Replaced c++ comment.
+ *
+ *	Revision 1.55  2002/08/09 15:40:21  rwahl
+ *	Editorial change (renamed ConfSpeedCap).
+ *
+ *	Revision 1.54  2002/08/09 11:06:07  rwahl
+ *	Added OID_SKGE_SPEED_CAP.
+ *
+ *	Revision 1.53  2002/08/09 09:45:28  rwahl
+ *	Added support for NDIS OID_PNP_xxx.
+ *	Editorial changes.
+ *
+ *	Revision 1.52  2002/08/06 17:54:07  rwahl
+ *	- Added speed cap to PNMI config struct.
+ *
+ *	Revision 1.51  2002/07/17 19:19:26  rwahl
+ *	- Added OID_SKGE_SPEED_MODE and OID_SKGE_SPEED_STATUS.
+ *	- Added SK_PNMI_CNT_RX_PMACC_ERR() & SK_PNMI_CNT_RX_LONGFRAMES().
+ *	- Added speed mode & status to PNMI config struct.
+ *	- Editorial changes.
+ *
+ *	Revision 1.50  2002/05/22 08:59:37  rwahl
+ *	Added string definitions for error msgs.
+ *
+ *	Revision 1.49  2001/11/20 09:23:50  rwahl
+ *	- pnmi struct: reordered and aligned to 32bit.
+ *
+ *	Revision 1.48  2001/02/23 14:34:24  mkunz
+ *	Changed macro PHYS2INST. Added pAC to Interface
+ *
+ *	Revision 1.47  2001/02/07 08:28:23  mkunz
+ *	- Added Oids: 	OID_SKGE_DIAG_ACTION
+ *					OID_SKGE_DIAG_RESULT
+ *					OID_SKGE_MULTICAST_LIST
+ *					OID_SKGE_CURRENT_PACKET_FILTER
+ *					OID_SKGE_INTERMEDIATE_SUPPORT
+ *	- Changed value of OID_SKGE_MTU
+ *
+ *	Revision 1.46  2001/02/06 10:01:41  mkunz
+ *	- Pnmi V4 dual net support added. Interface functions and macros extended
+ *	- Vpd bug fixed
+ *	- OID_SKGE_MTU added
+ *
+ *	Revision 1.45  2001/01/22 13:41:37  rassmann
+ *	Supporting two nets on dual-port adapters.
+ *
+ *	Revision 1.44  2000/09/07 07:35:27  rwahl
+ *	- removed NDIS counter specific data type.
+ *	- fixed spelling for OID_SKGE_RLMT_PORT_PREFERRED.
+ *
+ *	Revision 1.43  2000/08/04 11:41:08  rwahl
+ *	- Fixed compiler warning (port is always >= 0) for macros
+ *	  SK_PNMI_CNT_RX_LONGFRAMES & SK_PNMI_CNT_SYNC_OCTETS
+ *
+ *	Revision 1.42  2000/08/03 15:14:07  rwahl
+ *	- Corrected error in driver macros addressing a physical port.
+ *
+ *	Revision 1.41  2000/08/01 16:22:29  rwahl
+ *	- Changed MDB version to 3.1.
+ *	- Added definitions for StatRxLongFrames counter.
+ *	- Added macro to be used by driver to count long frames received.
+ *	- Added directive to control width (default = 32bit) of NDIS statistic
+ *	  counters (SK_NDIS_64BIT_CTR).
+ *
+ *	Revision 1.40  2000/03/31 13:51:34  rwahl
+ *	Added SK_UPTR cast to offset calculation for PNMI struct fields;
+ *	missing cast caused compiler warnings by Win64 compiler.
+ *
+ *	Revision 1.39  1999/12/06 10:09:47  rwahl
+ *	Added new error log message.
+ *
+ *	Revision 1.38  1999/11/22 13:57:55  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.37  1999/09/14 14:25:32  rwahl
+ *	Set MDB version for 1000Base-T (sensors, Master/Slave) changes.
+ *
+ *	Revision 1.36  1999/05/20 09:24:56  cgoos
+ *	Changes for 1000Base-T (sensors, Master/Slave).
+ *
+ *	Revision 1.35  1999/04/13 15:10:51  mhaveman
+ *	Replaced RLMT macros SK_RLMT_CHECK_xxx again by those of PNMI to
+ *	grant unified interface. But PNMI macros will store the same
+ *	value as RLMT macros.
+ *
+ *	Revision 1.34  1999/04/13 15:03:49  mhaveman
+ *	-Changed copyright
+ *	-Removed SK_PNMI_RLMT_MODE_CHK_xxx macros. Those of RLMT should be
+ *	 used.
+ *
+ *	Revision 1.33  1999/03/23 10:41:02  mhaveman
+ *	Changed comments.
+ *
+ *	Revision 1.32  1999/01/25 15:01:33  mhaveman
+ *	Added support for multiple simultaniously active ports.
+ *
+ *	Revision 1.31  1999/01/19 10:06:26  mhaveman
+ *	Added new error log message.
+ *
+ *	Revision 1.30  1999/01/05 10:34:49  mhaveman
+ *	Fixed little error in RlmtChangeEstimate calculation.
+ *
+ *	Revision 1.29  1999/01/05 09:59:41  mhaveman
+ *	Redesigned port switch average calculation to avoid 64bit
+ *	arithmetic.
+ *
+ *	Revision 1.28  1998/12/08 10:05:48  mhaveman
+ *	Defined macro SK_PNMI_MIN_STRUCT_SIZE.
+ *
+ *	Revision 1.27  1998/12/03 14:39:35  mhaveman
+ *	Fixed problem that LSTAT was enumerated wrong.
+ *
+ *	Revision 1.26  1998/12/03 11:19:51  mhaveman
+ *	Changed contents of errlog message SK_PNMI_ERR016MSG
+ *
+ *	Revision 1.25  1998/12/01 10:40:04  mhaveman
+ *	Changed size of SensorNumber, ChecksumNumber and RlmtPortNumber in
+ *	SK_PNMI_STRUCT_DATA to be conform with OID definition.
+ *
+ *	Revision 1.24  1998/11/20 08:09:27  mhaveman
+ *	Added macros to convert between logical, physical port indexes and
+ *	instances.
+ *
+ *	Revision 1.23  1998/11/10 13:41:13  mhaveman
+ *	Needed to change interface, because NT driver needs a return value
+ *	of needed buffer space on TOO_SHORT errors. Therefore all
+ *	SkPnmiGet/Preset/Set functions now have a pointer to the length
+ *	parameter, where the needed space on error is returned.
+ *
+ *	Revision 1.22  1998/11/03 12:05:51  mhaveman
+ *	Added pAC parameter to counter macors.
+ *
+ *	Revision 1.21  1998/11/02 10:47:36  mhaveman
+ *	Added syslog messages for internal errors.
+ *
+ *	Revision 1.20  1998/10/30 15:49:36  mhaveman
+ *	-Removed unused SK_PNMI_UTILIZATION_BASE and EstOldCnt.
+ *	-Redefined SK_PNMI_CHG_EST_BASE to hundreds of seconds.
+ *
+ *	Revision 1.19  1998/10/29 15:38:44  mhaveman
+ *	Changed string lengths of PNMI_STRUCT_DATA structure because
+ *	string OIDs are now encoded with leading length ocetet.
+ *
+ *	Revision 1.18  1998/10/29 08:52:27  mhaveman
+ *	-Added byte to strings in PNMI_STRUCT_DATA structure.
+ *	-Shortened SK_PNMI_RLMT structure to SK_MAX_MACS elements.
+ *
+ *	Revision 1.17  1998/10/28 08:49:50  mhaveman
+ *	-Changed type of Instance back to SK_U32 because of VPD
+ *	-Changed type from SK_U8 to char of PciBusSpeed, PciBusWidth, PMD,
+ *	 and Connector.
+ *
+ *	Revision 1.16  1998/10/22 10:42:31  mhaveman
+ *	-Removed (SK_U32) casts for OIDs
+ *	-excluded NDIS OIDs when they are already defined with ifndef _NDIS_
+ *
+ *	Revision 1.15  1998/10/20 13:56:28  mhaveman
+ *	Headerfile includes now directly other header files to comile correctly.
+ *
+ *	Revision 1.14  1998/10/20 07:31:09  mhaveman
+ *	Made type changes to unsigned int where possible.
+ *
+ *	Revision 1.13  1998/10/19 10:53:13  mhaveman
+ *	-Casted OID definitions to SK_U32
+ *	-Renamed RlmtMAC... to RlmtPort...
+ *	-Changed wrong type of VpdEntriesList from SK_U32 to char *
+ *
+ *	Revision 1.12  1998/10/13 07:42:27  mhaveman
+ *	-Added OIDs OID_SKGE_TRAP_NUMBER and OID_SKGE_ALL_DATA
+ *	-Removed old cvs history entries
+ *	-Renamed MacNumber to PortNumber
+ *
+ *	Revision 1.11  1998/10/07 10:55:24  mhaveman
+ *	-Added OID_MDB_VERSION. Therefore was a renumbering of the VPD OIDs
+ *	 necessary.
+ *	-Added OID_GEN_ Ids to support the windows driver.
+ *
+ *	Revision 1.10  1998/09/30 13:41:10  mhaveman
+ *	Renamed some OIDs to reduce usage of 'MAC' which is replaced by 'PORT'.
+ *
+ *	Revision 1.9  1998/09/04 17:06:17  mhaveman
+ *	-Added SyncCounter as macro.
+ *	-Renamed OID_SKGE_.._NO_DESCR_CTS to OID_SKGE_.._NO_BUF_CTS.
+ *	-Added macros for driver description and version strings.
+ *
+ *	Revision 1.8  1998/09/04 14:36:52  mhaveman
+ *	Added OIDs and Structure to access value of macro counters which are
+ *	counted by the driver.
+ *
+ *	Revision 1.7  1998/09/04 11:59:36  mhaveman
+ *	Everything compiles now. Driver Macros for counting still missing.
+ *
+ ****************************************************************************/
+
+#ifndef _SKGEPNMI_H_
+#define _SKGEPNMI_H_
+
+/*
+ * Include dependencies
+ */
+#include "h/sktypes.h"
+#include "h/skerror.h"
+#include "h/sktimer.h"
+#include "h/ski2c.h"
+#include "h/skaddr.h"
+#include "h/skrlmt.h"
+#include "h/skvpd.h"
+
+/*
+ * Management Database Version
+ */
+#define SK_PNMI_MDB_VERSION		0x00030001	/* 3.1 */
+
+
+/*
+ * Event definitions
+ */
+#define SK_PNMI_EVT_SIRQ_OVERFLOW		1	/* Counter overflow */
+#define SK_PNMI_EVT_SEN_WAR_LOW			2	/* Lower war thres exceeded */
+#define SK_PNMI_EVT_SEN_WAR_UPP			3	/* Upper war thres exceeded */
+#define SK_PNMI_EVT_SEN_ERR_LOW			4	/* Lower err thres exceeded */
+#define SK_PNMI_EVT_SEN_ERR_UPP			5	/* Upper err thres exceeded */
+#define SK_PNMI_EVT_CHG_EST_TIMER		6	/* Timer event for RLMT Chg */
+#define SK_PNMI_EVT_UTILIZATION_TIMER	7	/* Timer event for Utiliza. */
+#define SK_PNMI_EVT_CLEAR_COUNTER		8	/* Clear statistic counters */
+#define SK_PNMI_EVT_XMAC_RESET			9	/* XMAC will be reset */
+
+#define SK_PNMI_EVT_RLMT_PORT_UP		10	/* Port came logically up */
+#define SK_PNMI_EVT_RLMT_PORT_DOWN		11	/* Port went logically down */
+#define SK_PNMI_EVT_RLMT_SEGMENTATION	13	/* Two SP root bridges found */
+#define SK_PNMI_EVT_RLMT_ACTIVE_DOWN	14	/* Port went logically down */
+#define SK_PNMI_EVT_RLMT_ACTIVE_UP		15	/* Port came logically up */
+#define SK_PNMI_EVT_RLMT_SET_NETS		16	/* 1. Parameter is number of nets
+												1 = single net; 2 = dual net */
+#define SK_PNMI_EVT_VCT_RESET		17	/* VCT port reset timer event started with SET. */
+
+
+/*
+ * Return values
+ */
+#define SK_PNMI_ERR_OK				0
+#define SK_PNMI_ERR_GENERAL			1
+#define SK_PNMI_ERR_TOO_SHORT		2
+#define SK_PNMI_ERR_BAD_VALUE		3
+#define SK_PNMI_ERR_READ_ONLY		4
+#define SK_PNMI_ERR_UNKNOWN_OID		5
+#define SK_PNMI_ERR_UNKNOWN_INST	6
+#define SK_PNMI_ERR_UNKNOWN_NET 	7
+
+
+/*
+ * Return values of driver reset function SK_DRIVER_RESET() and
+ * driver event function SK_DRIVER_EVENT()
+ */
+#define SK_PNMI_ERR_OK			0
+#define SK_PNMI_ERR_FAIL		1
+
+
+/*
+ * Return values of driver test function SK_DRIVER_SELFTEST()
+ */
+#define SK_PNMI_TST_UNKNOWN		(1 << 0)
+#define SK_PNMI_TST_TRANCEIVER		(1 << 1)
+#define SK_PNMI_TST_ASIC		(1 << 2)
+#define SK_PNMI_TST_SENSOR		(1 << 3)
+#define SK_PNMI_TST_POWERMGMT		(1 << 4)
+#define SK_PNMI_TST_PCI			(1 << 5)
+#define SK_PNMI_TST_MAC			(1 << 6)
+
+
+/*
+ * RLMT specific definitions
+ */
+#define SK_PNMI_RLMT_STATUS_STANDBY	1
+#define SK_PNMI_RLMT_STATUS_ACTIVE	2
+#define SK_PNMI_RLMT_STATUS_ERROR	3
+
+#define SK_PNMI_RLMT_LSTAT_PHY_DOWN	1
+#define SK_PNMI_RLMT_LSTAT_AUTONEG	2
+#define SK_PNMI_RLMT_LSTAT_LOG_DOWN	3
+#define SK_PNMI_RLMT_LSTAT_LOG_UP	4
+#define SK_PNMI_RLMT_LSTAT_INDETERMINATED 5
+
+#define SK_PNMI_RLMT_MODE_CHK_LINK	(SK_RLMT_CHECK_LINK)
+#define SK_PNMI_RLMT_MODE_CHK_RX	(SK_RLMT_CHECK_LOC_LINK)
+#define SK_PNMI_RLMT_MODE_CHK_SPT	(SK_RLMT_CHECK_SEG)
+/* #define SK_PNMI_RLMT_MODE_CHK_EX */
+
+/*
+ * OID definition
+ */
+#ifndef _NDIS_	/* Check, whether NDIS already included OIDs */
+
+#define OID_GEN_XMIT_OK					0x00020101
+#define OID_GEN_RCV_OK					0x00020102
+#define OID_GEN_XMIT_ERROR				0x00020103
+#define OID_GEN_RCV_ERROR				0x00020104
+#define OID_GEN_RCV_NO_BUFFER			0x00020105
+
+/* #define OID_GEN_DIRECTED_BYTES_XMIT	0x00020201 */
+#define OID_GEN_DIRECTED_FRAMES_XMIT	0x00020202
+/* #define OID_GEN_MULTICAST_BYTES_XMIT	0x00020203 */
+#define OID_GEN_MULTICAST_FRAMES_XMIT	0x00020204
+/* #define OID_GEN_BROADCAST_BYTES_XMIT	0x00020205 */
+#define OID_GEN_BROADCAST_FRAMES_XMIT	0x00020206
+/* #define OID_GEN_DIRECTED_BYTES_RCV	0x00020207 */
+#define OID_GEN_DIRECTED_FRAMES_RCV		0x00020208
+/* #define OID_GEN_MULTICAST_BYTES_RCV	0x00020209 */
+#define OID_GEN_MULTICAST_FRAMES_RCV	0x0002020A
+/* #define OID_GEN_BROADCAST_BYTES_RCV	0x0002020B */
+#define OID_GEN_BROADCAST_FRAMES_RCV	0x0002020C
+#define OID_GEN_RCV_CRC_ERROR			0x0002020D
+#define OID_GEN_TRANSMIT_QUEUE_LENGTH	0x0002020E
+
+#define OID_802_3_PERMANENT_ADDRESS		0x01010101
+#define OID_802_3_CURRENT_ADDRESS		0x01010102
+/* #define OID_802_3_MULTICAST_LIST		0x01010103 */
+/* #define OID_802_3_MAXIMUM_LIST_SIZE	0x01010104 */
+/* #define OID_802_3_MAC_OPTIONS		0x01010105 */
+
+#define OID_802_3_RCV_ERROR_ALIGNMENT	0x01020101
+#define OID_802_3_XMIT_ONE_COLLISION	0x01020102
+#define OID_802_3_XMIT_MORE_COLLISIONS	0x01020103
+#define OID_802_3_XMIT_DEFERRED			0x01020201
+#define OID_802_3_XMIT_MAX_COLLISIONS	0x01020202
+#define OID_802_3_RCV_OVERRUN			0x01020203
+#define OID_802_3_XMIT_UNDERRUN			0x01020204
+#define OID_802_3_XMIT_TIMES_CRS_LOST	0x01020206
+#define OID_802_3_XMIT_LATE_COLLISIONS	0x01020207
+
+/*
+ * PnP and PM OIDs
+ */
+#ifdef SK_POWER_MGMT
+#define OID_PNP_CAPABILITIES			0xFD010100
+#define OID_PNP_SET_POWER				0xFD010101
+#define OID_PNP_QUERY_POWER				0xFD010102
+#define OID_PNP_ADD_WAKE_UP_PATTERN		0xFD010103
+#define OID_PNP_REMOVE_WAKE_UP_PATTERN	0xFD010104
+#define OID_PNP_ENABLE_WAKE_UP			0xFD010106
+#endif /* SK_POWER_MGMT */
+
+#endif /* _NDIS_ */
+
+#define OID_SKGE_MDB_VERSION			0xFF010100
+#define OID_SKGE_SUPPORTED_LIST			0xFF010101
+#define OID_SKGE_VPD_FREE_BYTES			0xFF010102
+#define OID_SKGE_VPD_ENTRIES_LIST		0xFF010103
+#define OID_SKGE_VPD_ENTRIES_NUMBER		0xFF010104
+#define OID_SKGE_VPD_KEY				0xFF010105
+#define OID_SKGE_VPD_VALUE				0xFF010106
+#define OID_SKGE_VPD_ACCESS				0xFF010107
+#define OID_SKGE_VPD_ACTION				0xFF010108
+
+#define OID_SKGE_PORT_NUMBER			0xFF010110
+#define OID_SKGE_DEVICE_TYPE			0xFF010111
+#define OID_SKGE_DRIVER_DESCR			0xFF010112
+#define OID_SKGE_DRIVER_VERSION			0xFF010113
+#define OID_SKGE_HW_DESCR				0xFF010114
+#define OID_SKGE_HW_VERSION				0xFF010115
+#define OID_SKGE_CHIPSET				0xFF010116
+#define OID_SKGE_ACTION					0xFF010117
+#define OID_SKGE_RESULT					0xFF010118
+#define OID_SKGE_BUS_TYPE				0xFF010119
+#define OID_SKGE_BUS_SPEED				0xFF01011A
+#define OID_SKGE_BUS_WIDTH				0xFF01011B
+/* 0xFF01011C unused */
+#define OID_SKGE_DIAG_ACTION			0xFF01011D
+#define OID_SKGE_DIAG_RESULT			0xFF01011E
+#define OID_SKGE_MTU					0xFF01011F
+#define OID_SKGE_PHYS_CUR_ADDR			0xFF010120
+#define OID_SKGE_PHYS_FAC_ADDR			0xFF010121
+#define OID_SKGE_PMD					0xFF010122
+#define OID_SKGE_CONNECTOR				0xFF010123
+#define OID_SKGE_LINK_CAP				0xFF010124
+#define OID_SKGE_LINK_MODE				0xFF010125
+#define OID_SKGE_LINK_MODE_STATUS		0xFF010126
+#define OID_SKGE_LINK_STATUS			0xFF010127
+#define OID_SKGE_FLOWCTRL_CAP			0xFF010128
+#define OID_SKGE_FLOWCTRL_MODE			0xFF010129
+#define OID_SKGE_FLOWCTRL_STATUS		0xFF01012A
+#define OID_SKGE_PHY_OPERATION_CAP		0xFF01012B
+#define OID_SKGE_PHY_OPERATION_MODE		0xFF01012C
+#define OID_SKGE_PHY_OPERATION_STATUS	0xFF01012D
+#define OID_SKGE_MULTICAST_LIST			0xFF01012E
+#define OID_SKGE_CURRENT_PACKET_FILTER	0xFF01012F
+
+#define OID_SKGE_TRAP					0xFF010130
+#define OID_SKGE_TRAP_NUMBER			0xFF010131
+
+#define OID_SKGE_RLMT_MODE				0xFF010140
+#define OID_SKGE_RLMT_PORT_NUMBER		0xFF010141
+#define OID_SKGE_RLMT_PORT_ACTIVE		0xFF010142
+#define OID_SKGE_RLMT_PORT_PREFERRED	0xFF010143
+#define OID_SKGE_INTERMEDIATE_SUPPORT	0xFF010160
+
+#define OID_SKGE_SPEED_CAP				0xFF010170
+#define OID_SKGE_SPEED_MODE				0xFF010171
+#define OID_SKGE_SPEED_STATUS			0xFF010172
+
+#define OID_SKGE_SENSOR_NUMBER			0xFF020100
+#define OID_SKGE_SENSOR_INDEX			0xFF020101
+#define OID_SKGE_SENSOR_DESCR			0xFF020102
+#define OID_SKGE_SENSOR_TYPE			0xFF020103
+#define OID_SKGE_SENSOR_VALUE			0xFF020104
+#define OID_SKGE_SENSOR_WAR_THRES_LOW	0xFF020105
+#define OID_SKGE_SENSOR_WAR_THRES_UPP	0xFF020106
+#define OID_SKGE_SENSOR_ERR_THRES_LOW	0xFF020107
+#define OID_SKGE_SENSOR_ERR_THRES_UPP	0xFF020108
+#define OID_SKGE_SENSOR_STATUS			0xFF020109
+#define OID_SKGE_SENSOR_WAR_CTS			0xFF02010A
+#define OID_SKGE_SENSOR_ERR_CTS			0xFF02010B
+#define OID_SKGE_SENSOR_WAR_TIME		0xFF02010C
+#define OID_SKGE_SENSOR_ERR_TIME		0xFF02010D
+
+#define OID_SKGE_CHKSM_NUMBER			0xFF020110
+#define OID_SKGE_CHKSM_RX_OK_CTS		0xFF020111
+#define OID_SKGE_CHKSM_RX_UNABLE_CTS	0xFF020112
+#define OID_SKGE_CHKSM_RX_ERR_CTS		0xFF020113
+#define OID_SKGE_CHKSM_TX_OK_CTS		0xFF020114
+#define OID_SKGE_CHKSM_TX_UNABLE_CTS	0xFF020115
+
+#define OID_SKGE_STAT_TX				0xFF020120
+#define OID_SKGE_STAT_TX_OCTETS			0xFF020121
+#define OID_SKGE_STAT_TX_BROADCAST		0xFF020122
+#define OID_SKGE_STAT_TX_MULTICAST		0xFF020123
+#define OID_SKGE_STAT_TX_UNICAST		0xFF020124
+#define OID_SKGE_STAT_TX_LONGFRAMES		0xFF020125
+#define OID_SKGE_STAT_TX_BURST			0xFF020126
+#define OID_SKGE_STAT_TX_PFLOWC			0xFF020127
+#define OID_SKGE_STAT_TX_FLOWC			0xFF020128
+#define OID_SKGE_STAT_TX_SINGLE_COL		0xFF020129
+#define OID_SKGE_STAT_TX_MULTI_COL		0xFF02012A
+#define OID_SKGE_STAT_TX_EXCESS_COL		0xFF02012B
+#define OID_SKGE_STAT_TX_LATE_COL		0xFF02012C
+#define OID_SKGE_STAT_TX_DEFFERAL		0xFF02012D
+#define OID_SKGE_STAT_TX_EXCESS_DEF		0xFF02012E
+#define OID_SKGE_STAT_TX_UNDERRUN		0xFF02012F
+#define OID_SKGE_STAT_TX_CARRIER		0xFF020130
+/* #define OID_SKGE_STAT_TX_UTIL		0xFF020131 */
+#define OID_SKGE_STAT_TX_64				0xFF020132
+#define OID_SKGE_STAT_TX_127			0xFF020133
+#define OID_SKGE_STAT_TX_255			0xFF020134
+#define OID_SKGE_STAT_TX_511			0xFF020135
+#define OID_SKGE_STAT_TX_1023			0xFF020136
+#define OID_SKGE_STAT_TX_MAX			0xFF020137
+#define OID_SKGE_STAT_TX_SYNC			0xFF020138
+#define OID_SKGE_STAT_TX_SYNC_OCTETS	0xFF020139
+#define OID_SKGE_STAT_RX				0xFF02013A
+#define OID_SKGE_STAT_RX_OCTETS			0xFF02013B
+#define OID_SKGE_STAT_RX_BROADCAST		0xFF02013C
+#define OID_SKGE_STAT_RX_MULTICAST		0xFF02013D
+#define OID_SKGE_STAT_RX_UNICAST		0xFF02013E
+#define OID_SKGE_STAT_RX_PFLOWC			0xFF02013F
+#define OID_SKGE_STAT_RX_FLOWC			0xFF020140
+#define OID_SKGE_STAT_RX_PFLOWC_ERR		0xFF020141
+#define OID_SKGE_STAT_RX_FLOWC_UNKWN	0xFF020142
+#define OID_SKGE_STAT_RX_BURST			0xFF020143
+#define OID_SKGE_STAT_RX_MISSED			0xFF020144
+#define OID_SKGE_STAT_RX_FRAMING		0xFF020145
+#define OID_SKGE_STAT_RX_OVERFLOW		0xFF020146
+#define OID_SKGE_STAT_RX_JABBER			0xFF020147
+#define OID_SKGE_STAT_RX_CARRIER		0xFF020148
+#define OID_SKGE_STAT_RX_IR_LENGTH		0xFF020149
+#define OID_SKGE_STAT_RX_SYMBOL			0xFF02014A
+#define OID_SKGE_STAT_RX_SHORTS			0xFF02014B
+#define OID_SKGE_STAT_RX_RUNT			0xFF02014C
+#define OID_SKGE_STAT_RX_CEXT			0xFF02014D
+#define OID_SKGE_STAT_RX_TOO_LONG		0xFF02014E
+#define OID_SKGE_STAT_RX_FCS			0xFF02014F
+/* #define OID_SKGE_STAT_RX_UTIL		0xFF020150 */
+#define OID_SKGE_STAT_RX_64				0xFF020151
+#define OID_SKGE_STAT_RX_127			0xFF020152
+#define OID_SKGE_STAT_RX_255			0xFF020153
+#define OID_SKGE_STAT_RX_511			0xFF020154
+#define OID_SKGE_STAT_RX_1023			0xFF020155
+#define OID_SKGE_STAT_RX_MAX			0xFF020156
+#define OID_SKGE_STAT_RX_LONGFRAMES		0xFF020157
+
+#define OID_SKGE_RLMT_CHANGE_CTS		0xFF020160
+#define OID_SKGE_RLMT_CHANGE_TIME		0xFF020161
+#define OID_SKGE_RLMT_CHANGE_ESTIM		0xFF020162
+#define OID_SKGE_RLMT_CHANGE_THRES		0xFF020163
+
+#define OID_SKGE_RLMT_PORT_INDEX		0xFF020164
+#define OID_SKGE_RLMT_STATUS			0xFF020165
+#define OID_SKGE_RLMT_TX_HELLO_CTS		0xFF020166
+#define OID_SKGE_RLMT_RX_HELLO_CTS		0xFF020167
+#define OID_SKGE_RLMT_TX_SP_REQ_CTS		0xFF020168
+#define OID_SKGE_RLMT_RX_SP_CTS			0xFF020169
+
+#define OID_SKGE_RLMT_MONITOR_NUMBER	0xFF010150
+#define OID_SKGE_RLMT_MONITOR_INDEX		0xFF010151
+#define OID_SKGE_RLMT_MONITOR_ADDR		0xFF010152
+#define OID_SKGE_RLMT_MONITOR_ERRS		0xFF010153
+#define OID_SKGE_RLMT_MONITOR_TIMESTAMP	0xFF010154
+#define OID_SKGE_RLMT_MONITOR_ADMIN		0xFF010155
+
+#define OID_SKGE_TX_SW_QUEUE_LEN		0xFF020170
+#define OID_SKGE_TX_SW_QUEUE_MAX		0xFF020171
+#define OID_SKGE_TX_RETRY				0xFF020172
+#define OID_SKGE_RX_INTR_CTS			0xFF020173
+#define OID_SKGE_TX_INTR_CTS			0xFF020174
+#define OID_SKGE_RX_NO_BUF_CTS			0xFF020175
+#define OID_SKGE_TX_NO_BUF_CTS			0xFF020176
+#define OID_SKGE_TX_USED_DESCR_NO		0xFF020177
+#define OID_SKGE_RX_DELIVERED_CTS		0xFF020178
+#define OID_SKGE_RX_OCTETS_DELIV_CTS	0xFF020179
+#define OID_SKGE_RX_HW_ERROR_CTS		0xFF02017A
+#define OID_SKGE_TX_HW_ERROR_CTS		0xFF02017B
+#define OID_SKGE_IN_ERRORS_CTS			0xFF02017C
+#define OID_SKGE_OUT_ERROR_CTS			0xFF02017D
+#define OID_SKGE_ERR_RECOVERY_CTS		0xFF02017E
+#define OID_SKGE_SYSUPTIME				0xFF02017F
+
+#define OID_SKGE_ALL_DATA				0xFF020190
+
+/* Defines for VCT. */
+#define OID_SKGE_VCT_GET			0xFF020200
+#define OID_SKGE_VCT_SET			0xFF020201
+#define OID_SKGE_VCT_STATUS			0xFF020202
+
+
+/* VCT struct to store a backup copy of VCT data after a port reset. */
+typedef struct s_PnmiVct {
+	SK_U8			VctStatus;
+	SK_U8			PCableLen;
+	SK_U32			PMdiPairLen[4];
+	SK_U8			PMdiPairSts[4];
+} SK_PNMI_VCT;
+
+
+/* VCT status values (to be given to CPA via OID_SKGE_VCT_STATUS). */
+#define SK_PNMI_VCT_NONE		0
+#define SK_PNMI_VCT_OLD_VCT_DATA	1
+#define SK_PNMI_VCT_NEW_VCT_DATA	2
+#define SK_PNMI_VCT_OLD_DSP_DATA	4
+#define SK_PNMI_VCT_NEW_DSP_DATA	8
+#define SK_PNMI_VCT_RUNNING		16
+
+
+/* VCT cable test status. */
+#define SK_PNMI_VCT_NORMAL_CABLE		0
+#define SK_PNMI_VCT_SHORT_CABLE			1
+#define SK_PNMI_VCT_OPEN_CABLE			2
+#define SK_PNMI_VCT_TEST_FAIL			3
+#define SK_PNMI_VCT_IMPEDANCE_MISMATCH		4
+
+#define	OID_SKGE_TRAP_SEN_WAR_LOW		500
+#define OID_SKGE_TRAP_SEN_WAR_UPP		501
+#define	OID_SKGE_TRAP_SEN_ERR_LOW		502
+#define OID_SKGE_TRAP_SEN_ERR_UPP		503
+#define OID_SKGE_TRAP_RLMT_CHANGE_THRES	520
+#define OID_SKGE_TRAP_RLMT_CHANGE_PORT	521
+#define OID_SKGE_TRAP_RLMT_PORT_DOWN	522
+#define OID_SKGE_TRAP_RLMT_PORT_UP		523
+#define OID_SKGE_TRAP_RLMT_SEGMENTATION	524
+
+
+/*
+ * Define error numbers and messages for syslog
+ */
+#define SK_PNMI_ERR001		(SK_ERRBASE_PNMI + 1)
+#define SK_PNMI_ERR001MSG	"SkPnmiGetStruct: Unknown OID"
+#define SK_PNMI_ERR002		(SK_ERRBASE_PNMI + 2)
+#define SK_PNMI_ERR002MSG	"SkPnmiGetStruct: Cannot read VPD keys"
+#define SK_PNMI_ERR003		(SK_ERRBASE_PNMI + 3)
+#define SK_PNMI_ERR003MSG	"OidStruct: Called with wrong OID"
+#define SK_PNMI_ERR004		(SK_ERRBASE_PNMI + 4)
+#define SK_PNMI_ERR004MSG	"OidStruct: Called with wrong action"
+#define SK_PNMI_ERR005		(SK_ERRBASE_PNMI + 5)
+#define SK_PNMI_ERR005MSG	"Perform: Cannot reset driver"
+#define SK_PNMI_ERR006		(SK_ERRBASE_PNMI + 6)
+#define SK_PNMI_ERR006MSG	"Perform: Unknown OID action command"
+#define SK_PNMI_ERR007		(SK_ERRBASE_PNMI + 7)
+#define SK_PNMI_ERR007MSG	"General: Driver description not initialized"
+#define SK_PNMI_ERR008		(SK_ERRBASE_PNMI + 8)
+#define SK_PNMI_ERR008MSG	"Addr: Tried to get unknown OID"
+#define SK_PNMI_ERR009		(SK_ERRBASE_PNMI + 9)
+#define SK_PNMI_ERR009MSG	"Addr: Unknown OID"
+#define SK_PNMI_ERR010		(SK_ERRBASE_PNMI + 10)
+#define SK_PNMI_ERR010MSG	"CsumStat: Unknown OID"
+#define SK_PNMI_ERR011		(SK_ERRBASE_PNMI + 11)
+#define SK_PNMI_ERR011MSG	"SensorStat: Sensor descr string too long"
+#define SK_PNMI_ERR012		(SK_ERRBASE_PNMI + 12)
+#define SK_PNMI_ERR012MSG	"SensorStat: Unknown OID"
+#define SK_PNMI_ERR013		(SK_ERRBASE_PNMI + 13)
+#define SK_PNMI_ERR013MSG	""
+#define SK_PNMI_ERR014		(SK_ERRBASE_PNMI + 14)
+#define SK_PNMI_ERR014MSG	"Vpd: Cannot read VPD keys"
+#define SK_PNMI_ERR015		(SK_ERRBASE_PNMI + 15)
+#define SK_PNMI_ERR015MSG	"Vpd: Internal array for VPD keys to small"
+#define SK_PNMI_ERR016		(SK_ERRBASE_PNMI + 16)
+#define SK_PNMI_ERR016MSG	"Vpd: Key string too long"
+#define SK_PNMI_ERR017		(SK_ERRBASE_PNMI + 17)
+#define SK_PNMI_ERR017MSG	"Vpd: Invalid VPD status pointer"
+#define SK_PNMI_ERR018		(SK_ERRBASE_PNMI + 18)
+#define SK_PNMI_ERR018MSG	"Vpd: VPD data not valid"
+#define SK_PNMI_ERR019		(SK_ERRBASE_PNMI + 19)
+#define SK_PNMI_ERR019MSG	"Vpd: VPD entries list string too long"
+#define SK_PNMI_ERR021		(SK_ERRBASE_PNMI + 21)
+#define SK_PNMI_ERR021MSG	"Vpd: VPD data string too long"
+#define SK_PNMI_ERR022		(SK_ERRBASE_PNMI + 22)
+#define SK_PNMI_ERR022MSG	"Vpd: VPD data string too long should be errored before"
+#define SK_PNMI_ERR023		(SK_ERRBASE_PNMI + 23)
+#define SK_PNMI_ERR023MSG	"Vpd: Unknown OID in get action"
+#define SK_PNMI_ERR024		(SK_ERRBASE_PNMI + 24)
+#define SK_PNMI_ERR024MSG	"Vpd: Unknown OID in preset/set action"
+#define SK_PNMI_ERR025		(SK_ERRBASE_PNMI + 25)
+#define SK_PNMI_ERR025MSG	"Vpd: Cannot write VPD after modify entry"
+#define SK_PNMI_ERR026		(SK_ERRBASE_PNMI + 26)
+#define SK_PNMI_ERR026MSG	"Vpd: Cannot update VPD"
+#define SK_PNMI_ERR027		(SK_ERRBASE_PNMI + 27)
+#define SK_PNMI_ERR027MSG	"Vpd: Cannot delete VPD entry"
+#define SK_PNMI_ERR028		(SK_ERRBASE_PNMI + 28)
+#define SK_PNMI_ERR028MSG	"Vpd: Cannot update VPD after delete entry"
+#define SK_PNMI_ERR029		(SK_ERRBASE_PNMI + 29)
+#define SK_PNMI_ERR029MSG	"General: Driver description string too long"
+#define SK_PNMI_ERR030		(SK_ERRBASE_PNMI + 30)
+#define SK_PNMI_ERR030MSG	"General: Driver version not initialized"
+#define SK_PNMI_ERR031		(SK_ERRBASE_PNMI + 31)
+#define SK_PNMI_ERR031MSG	"General: Driver version string too long"
+#define SK_PNMI_ERR032		(SK_ERRBASE_PNMI + 32)
+#define SK_PNMI_ERR032MSG	"General: Cannot read VPD Name for HW descr"
+#define SK_PNMI_ERR033		(SK_ERRBASE_PNMI + 33)
+#define SK_PNMI_ERR033MSG	"General: HW description string too long"
+#define SK_PNMI_ERR034		(SK_ERRBASE_PNMI + 34)
+#define SK_PNMI_ERR034MSG	"General: Unknown OID"
+#define SK_PNMI_ERR035		(SK_ERRBASE_PNMI + 35)
+#define SK_PNMI_ERR035MSG	"Rlmt: Unknown OID"
+#define SK_PNMI_ERR036		(SK_ERRBASE_PNMI + 36)
+#define SK_PNMI_ERR036MSG	""
+#define SK_PNMI_ERR037		(SK_ERRBASE_PNMI + 37)
+#define SK_PNMI_ERR037MSG	"Rlmt: SK_RLMT_MODE_CHANGE event return not 0"
+#define SK_PNMI_ERR038		(SK_ERRBASE_PNMI + 38)
+#define SK_PNMI_ERR038MSG	"Rlmt: SK_RLMT_PREFPORT_CHANGE event return not 0"
+#define SK_PNMI_ERR039		(SK_ERRBASE_PNMI + 39)
+#define SK_PNMI_ERR039MSG	"RlmtStat: Unknown OID"
+#define SK_PNMI_ERR040		(SK_ERRBASE_PNMI + 40)
+#define SK_PNMI_ERR040MSG	"PowerManagement: Unknown OID"
+#define SK_PNMI_ERR041		(SK_ERRBASE_PNMI + 41)
+#define SK_PNMI_ERR041MSG	"MacPrivateConf: Unknown OID"
+#define SK_PNMI_ERR042		(SK_ERRBASE_PNMI + 42)
+#define SK_PNMI_ERR042MSG	"MacPrivateConf: SK_HWEV_SET_ROLE returned not 0"
+#define SK_PNMI_ERR043		(SK_ERRBASE_PNMI + 43)
+#define SK_PNMI_ERR043MSG	"MacPrivateConf: SK_HWEV_SET_LMODE returned not 0"
+#define SK_PNMI_ERR044		(SK_ERRBASE_PNMI + 44)
+#define SK_PNMI_ERR044MSG	"MacPrivateConf: SK_HWEV_SET_FLOWMODE returned not 0"
+#define SK_PNMI_ERR045		(SK_ERRBASE_PNMI + 45)
+#define SK_PNMI_ERR045MSG	"MacPrivateConf: SK_HWEV_SET_SPEED returned not 0"
+#define SK_PNMI_ERR046		(SK_ERRBASE_PNMI + 46)
+#define SK_PNMI_ERR046MSG	"Monitor: Unknown OID"
+#define SK_PNMI_ERR047		(SK_ERRBASE_PNMI + 47)
+#define SK_PNMI_ERR047MSG	"SirqUpdate: Event function returns not 0"
+#define SK_PNMI_ERR048		(SK_ERRBASE_PNMI + 48)
+#define SK_PNMI_ERR048MSG	"RlmtUpdate: Event function returns not 0"
+#define SK_PNMI_ERR049		(SK_ERRBASE_PNMI + 49)
+#define SK_PNMI_ERR049MSG	"SkPnmiInit: Invalid size of 'CounterOffset' struct!!"
+#define SK_PNMI_ERR050		(SK_ERRBASE_PNMI + 50)
+#define SK_PNMI_ERR050MSG	"SkPnmiInit: Invalid size of 'StatAddr' table!!"
+#define SK_PNMI_ERR051		(SK_ERRBASE_PNMI + 51)
+#define SK_PNMI_ERR051MSG	"SkPnmiEvent: Port switch suspicious"
+#define SK_PNMI_ERR052		(SK_ERRBASE_PNMI + 52)
+#define SK_PNMI_ERR052MSG	""
+
+/*
+ * Management counter macros called by the driver
+ */
+#define SK_PNMI_SET_DRIVER_DESCR(pAC,v)	((pAC)->Pnmi.pDriverDescription = \
+	(char *)(v))
+
+#define SK_PNMI_SET_DRIVER_VER(pAC,v)	((pAC)->Pnmi.pDriverVersion = \
+	(char *)(v))
+
+
+#define SK_PNMI_CNT_TX_QUEUE_LEN(pAC,v,p) \
+	{ \
+		(pAC)->Pnmi.Port[p].TxSwQueueLen = (SK_U64)(v); \
+		if ((pAC)->Pnmi.Port[p].TxSwQueueLen > (pAC)->Pnmi.Port[p].TxSwQueueMax) { \
+			(pAC)->Pnmi.Port[p].TxSwQueueMax = (pAC)->Pnmi.Port[p].TxSwQueueLen; \
+		} \
+	}
+#define SK_PNMI_CNT_TX_RETRY(pAC,p)	(((pAC)->Pnmi.Port[p].TxRetryCts)++)
+#define SK_PNMI_CNT_RX_INTR(pAC,p)	(((pAC)->Pnmi.Port[p].RxIntrCts)++)
+#define SK_PNMI_CNT_TX_INTR(pAC,p)	(((pAC)->Pnmi.Port[p].TxIntrCts)++)
+#define SK_PNMI_CNT_NO_RX_BUF(pAC,p)	(((pAC)->Pnmi.Port[p].RxNoBufCts)++)
+#define SK_PNMI_CNT_NO_TX_BUF(pAC,p)	(((pAC)->Pnmi.Port[p].TxNoBufCts)++)
+#define SK_PNMI_CNT_USED_TX_DESCR(pAC,v,p) \
+	((pAC)->Pnmi.Port[p].TxUsedDescrNo=(SK_U64)(v));
+#define SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC,v,p) \
+	{ \
+		((pAC)->Pnmi.Port[p].RxDeliveredCts)++; \
+		(pAC)->Pnmi.Port[p].RxOctetsDeliveredCts += (SK_U64)(v); \
+	}
+#define SK_PNMI_CNT_ERR_RECOVERY(pAC,p)	(((pAC)->Pnmi.Port[p].ErrRecoveryCts)++);
+
+#define SK_PNMI_CNT_SYNC_OCTETS(pAC,p,v) \
+	{ \
+		if ((p) < SK_MAX_MACS) { \
+			((pAC)->Pnmi.Port[p].StatSyncCts)++; \
+			(pAC)->Pnmi.Port[p].StatSyncOctetsCts += (SK_U64)(v); \
+		} \
+	}
+
+#define SK_PNMI_CNT_RX_LONGFRAMES(pAC,p) \
+	{ \
+		if ((p) < SK_MAX_MACS) { \
+			((pAC)->Pnmi.Port[p].StatRxLongFrameCts++); \
+		} \
+	}
+
+#define SK_PNMI_CNT_RX_FRAMETOOLONG(pAC,p) \
+	{ \
+		if ((p) < SK_MAX_MACS) { \
+			((pAC)->Pnmi.Port[p].StatRxFrameTooLongCts++); \
+		} \
+	}
+
+#define SK_PNMI_CNT_RX_PMACC_ERR(pAC,p) \
+	{ \
+		if ((p) < SK_MAX_MACS) { \
+			((pAC)->Pnmi.Port[p].StatRxPMaccErr++); \
+		} \
+	}
+
+/*
+ * Conversion Macros
+ */
+#define SK_PNMI_PORT_INST2LOG(i)	((unsigned int)(i) - 1)
+#define SK_PNMI_PORT_LOG2INST(l)	((unsigned int)(l) + 1)
+#define SK_PNMI_PORT_PHYS2LOG(p)	((unsigned int)(p) + 1)
+#define SK_PNMI_PORT_LOG2PHYS(pAC,l)	((unsigned int)(l) - 1)
+#define SK_PNMI_PORT_PHYS2INST(pAC,p)	\
+	(pAC->Pnmi.DualNetActiveFlag ? 2 : ((unsigned int)(p) + 2))
+#define SK_PNMI_PORT_INST2PHYS(pAC,i)	((unsigned int)(i) - 2)
+
+/*
+ * Structure definition for SkPnmiGetStruct and SkPnmiSetStruct
+ */
+#define SK_PNMI_VPD_KEY_SIZE	5
+#define SK_PNMI_VPD_BUFSIZE		(VPD_SIZE)
+#define SK_PNMI_VPD_ENTRIES		(VPD_SIZE / 4)
+#define SK_PNMI_VPD_DATALEN		128 /*  Number of data bytes */
+
+#define SK_PNMI_MULTICAST_LISTLEN	64
+#define SK_PNMI_SENSOR_ENTRIES		(SK_MAX_SENSORS)
+#define SK_PNMI_CHECKSUM_ENTRIES	3
+#define SK_PNMI_MAC_ENTRIES			(SK_MAX_MACS + 1)
+#define SK_PNMI_MONITOR_ENTRIES		20
+#define SK_PNMI_TRAP_ENTRIES		10
+#define SK_PNMI_TRAPLEN				128
+#define SK_PNMI_STRINGLEN1			80
+#define SK_PNMI_STRINGLEN2			25
+#define SK_PNMI_TRAP_QUEUE_LEN		512
+
+typedef struct s_PnmiVpd {
+	char			VpdKey[SK_PNMI_VPD_KEY_SIZE];
+	char			VpdValue[SK_PNMI_VPD_DATALEN];
+	SK_U8			VpdAccess;
+	SK_U8			VpdAction;
+} SK_PNMI_VPD;
+
+typedef struct s_PnmiSensor {
+	SK_U8			SensorIndex;
+	char			SensorDescr[SK_PNMI_STRINGLEN2];
+	SK_U8			SensorType;
+	SK_U32			SensorValue;
+	SK_U32			SensorWarningThresholdLow;
+	SK_U32			SensorWarningThresholdHigh;
+	SK_U32			SensorErrorThresholdLow;
+	SK_U32			SensorErrorThresholdHigh;
+	SK_U8			SensorStatus;
+	SK_U64			SensorWarningCts;
+	SK_U64			SensorErrorCts;
+	SK_U64			SensorWarningTimestamp;
+	SK_U64			SensorErrorTimestamp;
+} SK_PNMI_SENSOR;
+
+typedef struct s_PnmiChecksum {
+	SK_U64			ChecksumRxOkCts;
+	SK_U64			ChecksumRxUnableCts;
+	SK_U64			ChecksumRxErrCts;
+	SK_U64			ChecksumTxOkCts;
+	SK_U64			ChecksumTxUnableCts;
+} SK_PNMI_CHECKSUM;
+
+typedef struct s_PnmiStat {
+	SK_U64			StatTxOkCts;
+	SK_U64			StatTxOctetsOkCts;
+	SK_U64			StatTxBroadcastOkCts;
+	SK_U64			StatTxMulticastOkCts;
+	SK_U64			StatTxUnicastOkCts;
+	SK_U64			StatTxLongFramesCts;
+	SK_U64			StatTxBurstCts;
+	SK_U64			StatTxPauseMacCtrlCts;
+	SK_U64			StatTxMacCtrlCts;
+	SK_U64			StatTxSingleCollisionCts;
+	SK_U64			StatTxMultipleCollisionCts;
+	SK_U64			StatTxExcessiveCollisionCts;
+	SK_U64			StatTxLateCollisionCts;
+	SK_U64			StatTxDeferralCts;
+	SK_U64			StatTxExcessiveDeferralCts;
+	SK_U64			StatTxFifoUnderrunCts;
+	SK_U64			StatTxCarrierCts;
+	SK_U64			Dummy1; /* StatTxUtilization */
+	SK_U64			StatTx64Cts;
+	SK_U64			StatTx127Cts;
+	SK_U64			StatTx255Cts;
+	SK_U64			StatTx511Cts;
+	SK_U64			StatTx1023Cts;
+	SK_U64			StatTxMaxCts;
+	SK_U64			StatTxSyncCts;
+	SK_U64			StatTxSyncOctetsCts;
+	SK_U64			StatRxOkCts;
+	SK_U64			StatRxOctetsOkCts;
+	SK_U64			StatRxBroadcastOkCts;
+	SK_U64			StatRxMulticastOkCts;
+	SK_U64			StatRxUnicastOkCts;
+	SK_U64			StatRxLongFramesCts;
+	SK_U64			StatRxPauseMacCtrlCts;
+	SK_U64			StatRxMacCtrlCts;
+	SK_U64			StatRxPauseMacCtrlErrorCts;
+	SK_U64			StatRxMacCtrlUnknownCts;
+	SK_U64			StatRxBurstCts;
+	SK_U64			StatRxMissedCts;
+	SK_U64			StatRxFramingCts;
+	SK_U64			StatRxFifoOverflowCts;
+	SK_U64			StatRxJabberCts;
+	SK_U64			StatRxCarrierCts;
+	SK_U64			StatRxIRLengthCts;
+	SK_U64			StatRxSymbolCts;
+	SK_U64			StatRxShortsCts;
+	SK_U64			StatRxRuntCts;
+	SK_U64			StatRxCextCts;
+	SK_U64			StatRxTooLongCts;
+	SK_U64			StatRxFcsCts;
+	SK_U64			Dummy2; /* StatRxUtilization */
+	SK_U64			StatRx64Cts;
+	SK_U64			StatRx127Cts;
+	SK_U64			StatRx255Cts;
+	SK_U64			StatRx511Cts;
+	SK_U64			StatRx1023Cts;
+	SK_U64			StatRxMaxCts;
+} SK_PNMI_STAT;
+
+typedef struct s_PnmiConf {
+	char			ConfMacCurrentAddr[6];
+	char			ConfMacFactoryAddr[6];
+	SK_U8			ConfPMD;
+	SK_U8			ConfConnector;
+	SK_U8			ConfLinkCapability;
+	SK_U8			ConfLinkMode;
+	SK_U8			ConfLinkModeStatus;
+	SK_U8			ConfLinkStatus;
+	SK_U8			ConfFlowCtrlCapability;
+	SK_U8			ConfFlowCtrlMode;
+	SK_U8			ConfFlowCtrlStatus;
+	SK_U8			ConfPhyOperationCapability;
+	SK_U8			ConfPhyOperationMode;
+	SK_U8			ConfPhyOperationStatus;
+	SK_U8			ConfSpeedCapability;
+	SK_U8			ConfSpeedMode;
+	SK_U8			ConfSpeedStatus;
+} SK_PNMI_CONF;
+
+typedef struct s_PnmiRlmt {
+	SK_U32			RlmtIndex;
+	SK_U32			RlmtStatus;
+	SK_U64			RlmtTxHelloCts;
+	SK_U64			RlmtRxHelloCts;
+	SK_U64			RlmtTxSpHelloReqCts;
+	SK_U64			RlmtRxSpHelloCts;
+} SK_PNMI_RLMT;
+
+typedef struct s_PnmiRlmtMonitor {
+	SK_U32			RlmtMonitorIndex;
+	char			RlmtMonitorAddr[6];
+	SK_U64			RlmtMonitorErrorCts;
+	SK_U64			RlmtMonitorTimestamp;
+	SK_U8			RlmtMonitorAdmin;
+} SK_PNMI_RLMT_MONITOR;
+
+typedef struct s_PnmiRequestStatus {
+	SK_U32			ErrorStatus;
+	SK_U32			ErrorOffset;
+} SK_PNMI_REQUEST_STATUS;
+
+typedef struct s_PnmiStrucData {
+	SK_U32			MgmtDBVersion;
+	SK_PNMI_REQUEST_STATUS	ReturnStatus;
+	SK_U32			VpdFreeBytes;
+	char			VpdEntriesList[SK_PNMI_VPD_ENTRIES * SK_PNMI_VPD_KEY_SIZE];
+	SK_U32			VpdEntriesNumber;
+	SK_PNMI_VPD		Vpd[SK_PNMI_VPD_ENTRIES];
+	SK_U32			PortNumber;
+	SK_U32			DeviceType;
+	char			DriverDescr[SK_PNMI_STRINGLEN1];
+	char			DriverVersion[SK_PNMI_STRINGLEN2];
+	char			HwDescr[SK_PNMI_STRINGLEN1];
+	char			HwVersion[SK_PNMI_STRINGLEN2];
+	SK_U16			Chipset;
+	SK_U32			MtuSize;
+	SK_U32			Action;
+	SK_U32			TestResult;
+	SK_U8			BusType;
+	SK_U8			BusSpeed;
+	SK_U8			BusWidth;
+	SK_U8			SensorNumber;
+	SK_PNMI_SENSOR	Sensor[SK_PNMI_SENSOR_ENTRIES];
+	SK_U8			ChecksumNumber;
+	SK_PNMI_CHECKSUM	Checksum[SK_PNMI_CHECKSUM_ENTRIES];
+	SK_PNMI_STAT	Stat[SK_PNMI_MAC_ENTRIES];
+	SK_PNMI_CONF	Conf[SK_PNMI_MAC_ENTRIES];
+	SK_U8			RlmtMode;
+	SK_U32			RlmtPortNumber;
+	SK_U8			RlmtPortActive;
+	SK_U8			RlmtPortPreferred;
+	SK_U64			RlmtChangeCts;
+	SK_U64			RlmtChangeTime;
+	SK_U64			RlmtChangeEstimate;
+	SK_U64			RlmtChangeThreshold;
+	SK_PNMI_RLMT	Rlmt[SK_MAX_MACS];
+	SK_U32			RlmtMonitorNumber;
+	SK_PNMI_RLMT_MONITOR	RlmtMonitor[SK_PNMI_MONITOR_ENTRIES];
+	SK_U32			TrapNumber;
+	SK_U8			Trap[SK_PNMI_TRAP_QUEUE_LEN];
+	SK_U64			TxSwQueueLen;
+	SK_U64			TxSwQueueMax;
+	SK_U64			TxRetryCts;
+	SK_U64			RxIntrCts;
+	SK_U64			TxIntrCts;
+	SK_U64			RxNoBufCts;
+	SK_U64			TxNoBufCts;
+	SK_U64			TxUsedDescrNo;
+	SK_U64			RxDeliveredCts;
+	SK_U64			RxOctetsDeliveredCts;
+	SK_U64			RxHwErrorsCts;
+	SK_U64			TxHwErrorsCts;
+	SK_U64			InErrorsCts;
+	SK_U64			OutErrorsCts;
+	SK_U64			ErrRecoveryCts;
+	SK_U64			SysUpTime;
+} SK_PNMI_STRUCT_DATA;
+
+#define SK_PNMI_STRUCT_SIZE	(sizeof(SK_PNMI_STRUCT_DATA))
+#define SK_PNMI_MIN_STRUCT_SIZE	((unsigned int)(SK_UPTR)\
+				 &(((SK_PNMI_STRUCT_DATA *)0)->VpdFreeBytes))
+														/*
+														 * ReturnStatus field
+														 * must be located
+														 * before VpdFreeBytes
+														 */
+
+/*
+ * Various definitions
+ */
+#define SK_PNMI_MAX_PROTOS		3
+
+#define SK_PNMI_CNT_NO			66	/* Must have the value of the enum
+									 * SK_PNMI_MAX_IDX. Define SK_PNMI_CHECK
+									 * for check while init phase 1
+									 */
+
+/*
+ * Estimate data structure
+ */
+typedef struct s_PnmiEstimate {
+	unsigned int	EstValueIndex;
+	SK_U64			EstValue[7];
+	SK_U64			Estimate;
+	SK_TIMER		EstTimer;
+} SK_PNMI_ESTIMATE;
+
+
+/*
+ * VCT timer data structure
+ */
+typedef struct s_VctTimer {
+	SK_TIMER		VctTimer;
+} SK_PNMI_VCT_TIMER;
+
+
+/*
+ * PNMI specific adapter context structure
+ */
+typedef struct s_PnmiPort {
+	SK_U64			StatSyncCts;
+	SK_U64			StatSyncOctetsCts;
+	SK_U64			StatRxLongFrameCts;
+	SK_U64			StatRxFrameTooLongCts;
+	SK_U64			StatRxPMaccErr;
+	SK_U64			TxSwQueueLen;
+	SK_U64			TxSwQueueMax;
+	SK_U64			TxRetryCts;
+	SK_U64			RxIntrCts;
+	SK_U64			TxIntrCts;
+	SK_U64			RxNoBufCts;
+	SK_U64			TxNoBufCts;
+	SK_U64			TxUsedDescrNo;
+	SK_U64			RxDeliveredCts;
+	SK_U64			RxOctetsDeliveredCts;
+	SK_U64			RxHwErrorsCts;
+	SK_U64			TxHwErrorsCts;
+	SK_U64			InErrorsCts;
+	SK_U64			OutErrorsCts;
+	SK_U64			ErrRecoveryCts;
+	SK_U64			RxShortZeroMark;
+	SK_U64			CounterOffset[SK_PNMI_CNT_NO];
+	SK_U32			CounterHigh[SK_PNMI_CNT_NO];
+	SK_BOOL			ActiveFlag;
+	SK_U8			Align[3];
+} SK_PNMI_PORT;
+
+
+typedef struct s_PnmiData {
+	SK_PNMI_PORT	Port	[SK_MAX_MACS];
+	SK_PNMI_PORT	BufPort	[SK_MAX_MACS]; /* 2002-09-13 pweber  */
+	SK_U64			VirtualCounterOffset[SK_PNMI_CNT_NO];
+	SK_U32			TestResult;
+	char			HwVersion[10];
+	SK_U16			Align01;
+
+	char			*pDriverDescription;
+	char			*pDriverVersion;
+
+	int				MacUpdatedFlag;
+	int				RlmtUpdatedFlag;
+	int				SirqUpdatedFlag;
+
+	SK_U64			RlmtChangeCts;
+	SK_U64			RlmtChangeTime;
+	SK_PNMI_ESTIMATE	RlmtChangeEstimate;
+	SK_U64			RlmtChangeThreshold;
+
+	SK_U64			StartUpTime;
+	SK_U32			DeviceType;
+	char			PciBusSpeed;
+	char			PciBusWidth;
+	char			Chipset;
+	char			PMD;
+	char			Connector;
+	SK_BOOL			DualNetActiveFlag;
+	SK_U16			Align02;
+
+	char			TrapBuf[SK_PNMI_TRAP_QUEUE_LEN];
+	unsigned int	TrapBufFree;
+	unsigned int	TrapQueueBeg;
+	unsigned int	TrapQueueEnd;
+	unsigned int	TrapBufPad;
+	unsigned int	TrapUnique;
+	SK_U8		VctStatus[SK_MAX_MACS];
+	SK_PNMI_VCT	VctBackup[SK_MAX_MACS];
+	SK_PNMI_VCT_TIMER VctTimeout[SK_MAX_MACS];
+} SK_PNMI;
+
+
+/*
+ * Function prototypes
+ */
+extern int SkPnmiInit(SK_AC *pAc, SK_IOC IoC, int level);
+extern int SkPnmiGetVar(SK_AC *pAc, SK_IOC IoC, SK_U32 Id, void* pBuf,
+	unsigned int* pLen, SK_U32 Instance, SK_U32 NetIndex);
+extern int SkPnmiPreSetVar(SK_AC *pAc, SK_IOC IoC, SK_U32 Id,
+	void* pBuf, unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
+extern int SkPnmiSetVar(SK_AC *pAc, SK_IOC IoC, SK_U32 Id, void* pBuf,
+	unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
+extern int SkPnmiGetStruct(SK_AC *pAc, SK_IOC IoC, void* pBuf,
+	unsigned int *pLen, SK_U32 NetIndex);
+extern int SkPnmiPreSetStruct(SK_AC *pAc, SK_IOC IoC, void* pBuf,
+	unsigned int *pLen, SK_U32 NetIndex);
+extern int SkPnmiSetStruct(SK_AC *pAc, SK_IOC IoC, void* pBuf,
+	unsigned int *pLen, SK_U32 NetIndex);
+extern int SkPnmiEvent(SK_AC *pAc, SK_IOC IoC, SK_U32 Event,
+	SK_EVPARA Param);
+
+#endif
diff --git a/drivers/net/sk98lin/h/skgesirq.h b/drivers/net/sk98lin/h/skgesirq.h
new file mode 100644
index 0000000..fc001b23
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgesirq.h
@@ -0,0 +1,194 @@
+/******************************************************************************
+ *
+ * Name:	skgesirq.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.26 $
+ * Date:	$Date: 2002/10/14 09:52:36 $
+ * Purpose:	SK specific Gigabit Ethernet special IRQ functions
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *	$Log: skgesirq.h,v $
+ *	Revision 1.26  2002/10/14 09:52:36  rschmidt
+ *	Added SKERR_SIRQ_E023 and SKERR_SIRQ_E023 for GPHY (Yukon)
+ *	Editorial changes
+ *
+ *	Revision 1.25  2002/07/15 18:15:52  rwahl
+ *	Editorial changes.
+ *
+ *	Revision 1.24  2002/07/15 15:39:21  rschmidt
+ *	Corrected define for SKERR_SIRQ_E022
+ *	Editorial changes
+ *
+ *	Revision 1.23  2002/04/25 11:09:45  rschmidt
+ *	Removed declarations for SkXmInitPhy(), SkXmRxTxEnable()
+ *	Editorial changes
+ *
+ *	Revision 1.22  2000/11/09 11:30:10  rassmann
+ *	WA: Waiting after releasing reset until BCom chip is accessible.
+ *
+ *	Revision 1.21  2000/10/18 12:22:40  cgoos
+ *	Added workaround for half duplex hangup.
+ *
+ *	Revision 1.20  1999/12/06 10:00:44  cgoos
+ *	Added SET event for role.
+ *
+ *	Revision 1.19  1999/11/22 13:58:26  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.18  1999/05/19 07:32:59  cgoos
+ *	Changes for 1000Base-T.
+ *
+ *	Revision 1.17  1999/03/12 13:29:31  malthoff
+ *	Move Autonegotiation Error Codes to skgeinit.h.
+ *
+ *	Revision 1.16  1999/03/08 10:11:28  gklug
+ *	add: AutoNegDone return codes
+ *
+ *	Revision 1.15  1998/11/18 13:20:53  gklug
+ *	add: different timeouts for active and non-active links
+ *
+ *	Revision 1.14  1998/11/04 07:18:14  cgoos
+ *	Added prototype for SkXmRxTxEnable.
+ *
+ *	Revision 1.13  1998/10/21 05:52:23  gklug
+ *	add: parameter DoLoop to InitPhy function
+ *
+ *	Revision 1.12  1998/10/19 06:45:03  cgoos
+ *	Added prototype for SkXmInitPhy.
+ *
+ *	Revision 1.11  1998/10/15 14:34:10  gklug
+ *	add: WA_TIME is 500 msec
+ *
+ *	Revision 1.10  1998/10/14 14:49:41  malthoff
+ *	Remove err log defines E021 and E022. They are
+ *	defined in skgeinit.h now.
+ *
+ *	Revision 1.9  1998/10/14 14:00:39  gklug
+ *	add: error logs for init phys
+ *
+ *	Revision 1.8  1998/10/14 05:44:05  gklug
+ *	add: E020
+ *
+ *	Revision 1.7  1998/10/02 06:24:58  gklug
+ *	add: error messages
+ *
+ *	Revision 1.6  1998/10/01 07:54:45  gklug
+ *	add: PNMI debug module
+ *
+ *	Revision 1.5  1998/09/28 13:36:31  malthoff
+ *	Move the bit definitions for Autonegotiation
+ *	and Flow Control to skgeinit.h.
+ *
+ *	Revision 1.4  1998/09/15 12:29:34  gklug
+ *	add: error logs
+ *
+ *	Revision 1.3  1998/09/03 13:54:02  gklug
+ *	add: function prototypes
+ *
+ *	Revision 1.2  1998/09/03 10:24:36  gklug
+ *	add: Events send by PNMI
+ *	add: parameter definition for Flow Control etc.
+ *
+ *	Revision 1.1  1998/08/27 11:50:27  gklug
+ *	initial revision
+ *
+ *
+ ******************************************************************************/
+
+#ifndef _INC_SKGESIRQ_H_
+#define _INC_SKGESIRQ_H_
+
+/*
+ * Define the Event the special IRQ/INI module can handle
+ */
+#define SK_HWEV_WATIM			1	/* Timeout for WA errata #2 XMAC */
+#define SK_HWEV_PORT_START		2	/* Port Start Event by RLMT */
+#define SK_HWEV_PORT_STOP		3	/* Port Stop Event by RLMT */
+#define SK_HWEV_CLEAR_STAT		4	/* Clear Statistics by PNMI */
+#define SK_HWEV_UPDATE_STAT		5	/* Update Statistics by PNMI */
+#define SK_HWEV_SET_LMODE		6	/* Set Link Mode by PNMI */
+#define SK_HWEV_SET_FLOWMODE	7	/* Set Flow Control Mode by PNMI */
+#define SK_HWEV_SET_ROLE		8	/* Set Master/Slave (Role) by PNMI */
+#define SK_HWEV_SET_SPEED		9	/* Set Link Speed by PNMI */
+#define SK_HWEV_HALFDUP_CHK		10	/* Half Duplex Hangup Workaround */
+
+#define SK_WA_ACT_TIME		(5000000L)	/* 5 sec */
+#define SK_WA_INA_TIME		(100000L)	/* 100 msec */
+
+#define SK_HALFDUP_CHK_TIME	(10000L)	/* 10 msec */
+
+/*
+ * Define the error numbers and messages
+ */
+#define SKERR_SIRQ_E001		(SK_ERRBASE_SIRQ+0)
+#define SKERR_SIRQ_E001MSG	"Unknown event"
+#define SKERR_SIRQ_E002		(SKERR_SIRQ_E001+1)
+#define SKERR_SIRQ_E002MSG	"Packet timeout RX1"
+#define SKERR_SIRQ_E003		(SKERR_SIRQ_E002+1)
+#define SKERR_SIRQ_E003MSG	"Packet timeout RX2"
+#define SKERR_SIRQ_E004		(SKERR_SIRQ_E003+1)
+#define SKERR_SIRQ_E004MSG	"MAC 1 not correctly initialized"
+#define SKERR_SIRQ_E005		(SKERR_SIRQ_E004+1)
+#define SKERR_SIRQ_E005MSG	"MAC 2 not correctly initialized"
+#define SKERR_SIRQ_E006		(SKERR_SIRQ_E005+1)
+#define SKERR_SIRQ_E006MSG	"CHECK failure R1"
+#define SKERR_SIRQ_E007		(SKERR_SIRQ_E006+1)
+#define SKERR_SIRQ_E007MSG	"CHECK failure R2"
+#define SKERR_SIRQ_E008		(SKERR_SIRQ_E007+1)
+#define SKERR_SIRQ_E008MSG	"CHECK failure XS1"
+#define SKERR_SIRQ_E009		(SKERR_SIRQ_E008+1)
+#define SKERR_SIRQ_E009MSG	"CHECK failure XA1"
+#define SKERR_SIRQ_E010		(SKERR_SIRQ_E009+1)
+#define SKERR_SIRQ_E010MSG	"CHECK failure XS2"
+#define SKERR_SIRQ_E011		(SKERR_SIRQ_E010+1)
+#define SKERR_SIRQ_E011MSG	"CHECK failure XA2"
+#define SKERR_SIRQ_E012		(SKERR_SIRQ_E011+1)
+#define SKERR_SIRQ_E012MSG	"unexpected IRQ Master error"
+#define SKERR_SIRQ_E013		(SKERR_SIRQ_E012+1)
+#define SKERR_SIRQ_E013MSG	"unexpected IRQ Status error"
+#define SKERR_SIRQ_E014		(SKERR_SIRQ_E013+1)
+#define SKERR_SIRQ_E014MSG	"Parity error on RAM (read)"
+#define SKERR_SIRQ_E015		(SKERR_SIRQ_E014+1)
+#define SKERR_SIRQ_E015MSG	"Parity error on RAM (write)"
+#define SKERR_SIRQ_E016		(SKERR_SIRQ_E015+1)
+#define SKERR_SIRQ_E016MSG	"Parity error MAC 1"
+#define SKERR_SIRQ_E017		(SKERR_SIRQ_E016+1)
+#define SKERR_SIRQ_E017MSG	"Parity error MAC 2"
+#define SKERR_SIRQ_E018		(SKERR_SIRQ_E017+1)
+#define SKERR_SIRQ_E018MSG	"Parity error RX 1"
+#define SKERR_SIRQ_E019		(SKERR_SIRQ_E018+1)
+#define SKERR_SIRQ_E019MSG	"Parity error RX 2"
+#define SKERR_SIRQ_E020		(SKERR_SIRQ_E019+1)
+#define SKERR_SIRQ_E020MSG	"MAC transmit FIFO underrun"
+#define SKERR_SIRQ_E021		(SKERR_SIRQ_E020+1)
+#define SKERR_SIRQ_E021MSG	"Spurious TWSI interrupt"
+#define SKERR_SIRQ_E022		(SKERR_SIRQ_E021+1)
+#define SKERR_SIRQ_E022MSG	"Cable pair swap error"
+#define SKERR_SIRQ_E023		(SKERR_SIRQ_E022+1)
+#define SKERR_SIRQ_E023MSG	"Auto-negotiation error"
+#define SKERR_SIRQ_E024		(SKERR_SIRQ_E023+1)
+#define SKERR_SIRQ_E024MSG	"FIFO overflow error"
+
+extern void SkGeSirqIsr(SK_AC *pAC, SK_IOC IoC, SK_U32 Istatus);
+extern int  SkGeSirqEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
+extern void SkHWLinkUp(SK_AC *pAC, SK_IOC IoC, int Port);
+extern void SkHWLinkDown(SK_AC *pAC, SK_IOC IoC, int Port);
+
+#endif	/* _INC_SKGESIRQ_H_ */
diff --git a/drivers/net/sk98lin/h/ski2c.h b/drivers/net/sk98lin/h/ski2c.h
new file mode 100644
index 0000000..5ffaf6e
--- /dev/null
+++ b/drivers/net/sk98lin/h/ski2c.h
@@ -0,0 +1,292 @@
+/******************************************************************************
+ *
+ * Name:	ski2c.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.34 $
+ * Date:	$Date: 2003/01/28 09:11:21 $
+ * Purpose:	Defines to access Voltage and Temperature Sensor
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: ski2c.h,v $
+ *	Revision 1.34  2003/01/28 09:11:21  rschmidt
+ *	Editorial changes
+ *
+ *	Revision 1.33  2002/10/14 16:40:50  rschmidt
+ *	Editorial changes (TWSI)
+ *
+ *	Revision 1.32  2002/08/13 08:55:07  rschmidt
+ *	Editorial changes
+ *
+ *	Revision 1.31  2002/08/06 09:44:22  jschmalz
+ *	Extensions and changes for Yukon
+ *
+ *	Revision 1.30  2001/04/05 11:38:09  rassmann
+ *	Set SenState to idle in SkI2cWaitIrq().
+ *	Changed error message in SkI2cWaitIrq().
+ *
+ *	Revision 1.29  2000/08/03 14:28:17  rassmann
+ *	- Added function to wait for I2C being ready before resetting the board.
+ *	- Replaced one duplicate "out of range" message with correct one.
+ *
+ *	Revision 1.28  1999/11/22 13:55:46  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.27  1999/05/20 09:23:10  cgoos
+ *	Changes for 1000Base-T (Fan sensors).
+ *
+ *	Revision 1.26  1998/12/01 13:45:47  gklug
+ *	add: InitLevel to I2c struct
+ *
+ *	Revision 1.25  1998/11/03 06:55:16  gklug
+ *	add: Dummy Reads to I2c struct
+ *
+ *	Revision 1.24  1998/10/02 14:28:59  cgoos
+ *	Added prototype for SkI2cIsr.
+ *
+ *	Revision 1.23  1998/09/08 12:20:11  gklug
+ *	add: prototypes for init and read functions
+ *
+ *	Revision 1.22  1998/09/08 07:37:56  gklug
+ *	add: log error if PCI_IO voltage sensor could not be initialized
+ *
+ *	Revision 1.21  1998/09/04 08:38:05  malthoff
+ *	Change the values for I2C_READ and I2C_WRITE
+ *
+ *	Revision 1.20  1998/08/25 07:52:22  gklug
+ *	chg: Timestamps (last) added for logging
+ *
+ *	Revision 1.19  1998/08/25 06:09:00  gklug
+ *	rmv: warning and error levels of the individual sensors.
+ *	add: timing definitions for sending traps and logging errors
+ *
+ *	Revision 1.18  1998/08/20 11:41:15  gklug
+ *	chg: omit STRCPY macro by using char * as Sensor Description
+ *
+ *	Revision 1.17  1998/08/20 11:37:43  gklug
+ *	chg: change Ioc to IoC
+ *
+ *	Revision 1.16  1998/08/20 11:30:38  gklug
+ *	fix: SenRead declaration
+ *
+ *	Revision 1.15  1998/08/20 11:27:53  gklug
+ *	fix: Compile bugs with new awrning constants
+ *
+ *	Revision 1.14  1998/08/20 08:53:12  gklug
+ *	fix: compiler errors
+ *	add: Threshold values
+ *
+ *	Revision 1.13  1998/08/19 12:21:16  gklug
+ *	fix: remove struct from C files (see CCC)
+ *	add: typedefs for all structs
+ *
+ *	Revision 1.12  1998/08/19 10:57:41  gklug
+ *	add: Warning levels
+ *
+ *	Revision 1.11  1998/08/18 08:37:02  malthoff
+ *	Prototypes not required for SK_DIAG.
+ *
+ *	Revision 1.10  1998/08/17 13:54:00  gklug
+ *	fix: declaration of event function
+ *
+ *	Revision 1.9  1998/08/17 06:48:39  malthoff
+ *	Remove some unrequired macros.
+ *	Fix the compiler errors.
+ *
+ *	Revision 1.8  1998/08/14 06:47:19  gklug
+ *	fix: Values are intergers
+ *
+ *	Revision 1.7  1998/08/14 06:26:05  gklug
+ *	add: Init error message
+ *
+ *	Revision 1.6  1998/08/13 08:31:08  gklug
+ *	add: Error message
+ *
+ *	Revision 1.5  1998/08/12 14:32:04  gklug
+ *	add: new error code/message
+ *
+ *	Revision 1.4  1998/08/12 13:39:08  gklug
+ *	chg: names of error messages
+ *	add: defines for Sensor type and thresholds
+ *
+ *	Revision 1.3  1998/08/11 07:57:16  gklug
+ *	add: sensor struct
+ *	add: Timeout defines
+ *	add: I2C control struct for pAC
+ *
+ *	Revision 1.2  1998/07/17 11:29:02  gklug
+ *	rmv: Microwire and SMTPANIC
+ *
+ *	Revision 1.1  1998/06/19 14:30:10  malthoff
+ *	Created. Sources taken from ML Project.
+ *
+ *
+ ******************************************************************************/
+
+/*
+ * SKI2C.H	contains all I2C specific defines
+ */
+
+#ifndef _SKI2C_H_
+#define _SKI2C_H_
+
+typedef struct  s_Sensor SK_SENSOR;
+
+#include "h/skgei2c.h"
+
+/*
+ * Define the I2C events.
+ */
+#define SK_I2CEV_IRQ	1	/* IRQ happened Event */
+#define SK_I2CEV_TIM	2	/* Timeout event */
+#define SK_I2CEV_CLEAR	3	/* Clear MIB Values */
+
+/*
+ * Define READ and WRITE Constants.
+ */
+#undef	I2C_READ		/* just in case */
+#undef	I2C_WRITE		/* just in case */
+#define I2C_READ	0
+#define I2C_WRITE	1
+#define I2C_BURST	1
+#define I2C_SINGLE	0
+
+#define SKERR_I2C_E001		(SK_ERRBASE_I2C+0)
+#define SKERR_I2C_E001MSG	"Sensor index unknown"
+#define SKERR_I2C_E002		(SKERR_I2C_E001+1)
+#define SKERR_I2C_E002MSG	"TWSI: transfer does not complete"
+#define SKERR_I2C_E003		(SKERR_I2C_E002+1)
+#define SKERR_I2C_E003MSG	"LM80: NAK on device send"
+#define SKERR_I2C_E004		(SKERR_I2C_E003+1)
+#define SKERR_I2C_E004MSG	"LM80: NAK on register send"
+#define SKERR_I2C_E005		(SKERR_I2C_E004+1)
+#define SKERR_I2C_E005MSG	"LM80: NAK on device (2) send"
+#define SKERR_I2C_E006		(SKERR_I2C_E005+1)
+#define SKERR_I2C_E006MSG	"Unknown event"
+#define SKERR_I2C_E007		(SKERR_I2C_E006+1)
+#define SKERR_I2C_E007MSG	"LM80 read out of state"
+#define SKERR_I2C_E008		(SKERR_I2C_E007+1)
+#define SKERR_I2C_E008MSG	"Unexpected sensor read completed"
+#define SKERR_I2C_E009		(SKERR_I2C_E008+1)
+#define SKERR_I2C_E009MSG	"WARNING: temperature sensor out of range"
+#define SKERR_I2C_E010		(SKERR_I2C_E009+1)
+#define SKERR_I2C_E010MSG	"WARNING: voltage sensor out of range"
+#define SKERR_I2C_E011		(SKERR_I2C_E010+1)
+#define SKERR_I2C_E011MSG	"ERROR: temperature sensor out of range"
+#define SKERR_I2C_E012		(SKERR_I2C_E011+1)
+#define SKERR_I2C_E012MSG	"ERROR: voltage sensor out of range"
+#define SKERR_I2C_E013		(SKERR_I2C_E012+1)
+#define SKERR_I2C_E013MSG	"ERROR: couldn't init sensor"
+#define SKERR_I2C_E014		(SKERR_I2C_E013+1)
+#define SKERR_I2C_E014MSG	"WARNING: fan sensor out of range"
+#define SKERR_I2C_E015		(SKERR_I2C_E014+1)
+#define SKERR_I2C_E015MSG	"ERROR: fan sensor out of range"
+#define SKERR_I2C_E016		(SKERR_I2C_E015+1)
+#define SKERR_I2C_E016MSG	"TWSI: active transfer does not complete"
+
+/*
+ * Define Timeout values
+ */
+#define SK_I2C_TIM_LONG		2000000L	/* 2 seconds */
+#define SK_I2C_TIM_SHORT	 100000L	/* 100 milliseconds */
+#define SK_I2C_TIM_WATCH	1000000L	/* 1 second */
+
+/*
+ * Define trap and error log hold times
+ */
+#ifndef	SK_SEN_ERR_TR_HOLD
+#define SK_SEN_ERR_TR_HOLD		(4*SK_TICKS_PER_SEC)
+#endif
+#ifndef	SK_SEN_ERR_LOG_HOLD
+#define SK_SEN_ERR_LOG_HOLD		(60*SK_TICKS_PER_SEC)
+#endif
+#ifndef	SK_SEN_WARN_TR_HOLD
+#define SK_SEN_WARN_TR_HOLD		(15*SK_TICKS_PER_SEC)
+#endif
+#ifndef	SK_SEN_WARN_LOG_HOLD
+#define SK_SEN_WARN_LOG_HOLD	(15*60*SK_TICKS_PER_SEC)
+#endif
+
+/*
+ * Defines for SenType
+ */
+#define SK_SEN_UNKNOWN	0
+#define SK_SEN_TEMP		1
+#define SK_SEN_VOLT		2
+#define SK_SEN_FAN		3
+
+/*
+ * Define for the SenErrorFlag
+ */
+#define SK_SEN_ERR_NOT_PRESENT	0	/* Error Flag: Sensor not present */
+#define SK_SEN_ERR_OK			1	/* Error Flag: O.K. */
+#define SK_SEN_ERR_WARN			2	/* Error Flag: Warning */
+#define SK_SEN_ERR_ERR			3	/* Error Flag: Error */
+#define SK_SEN_ERR_FAULTY		4	/* Error Flag: Faulty */
+
+/*
+ * Define the Sensor struct
+ */
+struct	s_Sensor {
+	char	*SenDesc;			/* Description */
+	int		SenType;			/* Voltage or Temperature */
+	SK_I32	SenValue;			/* Current value of the sensor */
+	SK_I32	SenThreErrHigh;		/* High error Threshhold of this sensor */
+	SK_I32	SenThreWarnHigh;	/* High warning Threshhold of this sensor */
+	SK_I32	SenThreErrLow;		/* Lower error Threshold of the sensor */
+	SK_I32	SenThreWarnLow;		/* Lower warning Threshold of the sensor */
+	int		SenErrFlag;			/* Sensor indicated an error */
+	SK_BOOL	SenInit;			/* Is sensor initialized ? */
+	SK_U64	SenErrCts;			/* Error  trap counter */
+	SK_U64	SenWarnCts;			/* Warning trap counter */
+	SK_U64	SenBegErrTS;		/* Begin error timestamp */
+	SK_U64	SenBegWarnTS;		/* Begin warning timestamp */
+	SK_U64	SenLastErrTrapTS;	/* Last error trap timestamp */
+	SK_U64	SenLastErrLogTS;	/* Last error log timestamp */
+	SK_U64	SenLastWarnTrapTS;	/* Last warning trap timestamp */
+	SK_U64	SenLastWarnLogTS;	/* Last warning log timestamp */
+	int		SenState;			/* Sensor State (see HW specific include) */
+	int		(*SenRead)(SK_AC *pAC, SK_IOC IoC, struct s_Sensor *pSen);
+								/* Sensors read function */
+	SK_U16	SenReg;				/* Register Address for this sensor */
+	SK_U8	SenDev;				/* Device Selection for this sensor */
+};
+
+typedef	struct	s_I2c {
+	SK_SENSOR	SenTable[SK_MAX_SENSORS];	/* Sensor Table */
+	int			CurrSens;	/* Which sensor is currently queried */
+	int			MaxSens;	/* Max. number of sensors */
+	int			TimerMode;	/* Use the timer also to watch the state machine */
+	int			InitLevel;	/* Initialized Level */
+#ifndef SK_DIAG
+	int			DummyReads;	/* Number of non-checked dummy reads */
+	SK_TIMER	SenTimer;	/* Sensors timer */
+#endif /* !SK_DIAG */
+} SK_I2C;
+
+extern int SkI2cReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen);
+#ifndef SK_DIAG
+extern int SkI2cEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
+extern int SkI2cInit(SK_AC *pAC, SK_IOC IoC, int Level);
+extern void SkI2cWaitIrq(SK_AC *pAC, SK_IOC IoC);
+extern void SkI2cIsr(SK_AC *pAC, SK_IOC IoC);
+
+#endif
+#endif /* n_SKI2C_H */
diff --git a/drivers/net/sk98lin/h/skqueue.h b/drivers/net/sk98lin/h/skqueue.h
new file mode 100644
index 0000000..bce20a7
--- /dev/null
+++ b/drivers/net/sk98lin/h/skqueue.h
@@ -0,0 +1,147 @@
+/******************************************************************************
+ *
+ * Name:	skqueue.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.14 $
+ * Date:	$Date: 2002/03/15 10:52:13 $
+ * Purpose:	Defines for the Event queue
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skqueue.h,v $
+ *	Revision 1.14  2002/03/15 10:52:13  mkunz
+ *	Added event classes for link aggregation
+ *
+ *	Revision 1.13  1999/11/22 13:59:05  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.12  1998/09/08 08:48:01  gklug
+ *	add: init level handling
+ *
+ *	Revision 1.11  1998/09/03 14:15:11  gklug
+ *	add: CSUM and HWAC Eventclass and function.
+ *	fix: pParaPtr according to CCC
+ *
+ *	Revision 1.10  1998/08/20 12:43:03  gklug
+ *	add: typedef SK_QUEUE
+ *
+ *	Revision 1.9  1998/08/19 09:50:59  gklug
+ *	fix: remove struct keyword from c-code (see CCC) add typedefs
+ *
+ *	Revision 1.8  1998/08/18 07:00:01  gklug
+ *	fix: SK_PTR not defined use void * instead.
+ *
+ *	Revision 1.7  1998/08/17 13:43:19  gklug
+ *	chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR
+ *
+ *	Revision 1.6  1998/08/14 07:09:30  gklug
+ *	fix: chg pAc -> pAC
+ *
+ *	Revision 1.5  1998/08/11 14:26:44  gklug
+ *	chg: Event Dispatcher returns now int.
+ *
+ *	Revision 1.4  1998/08/11 12:15:21  gklug
+ *	add: Error numbers of skqueue module
+ *
+ *	Revision 1.3  1998/08/07 12:54:23  gklug
+ *	fix: first compiled version
+ *
+ *	Revision 1.2  1998/08/07 09:34:00  gklug
+ *	adapt structure defs to CCC
+ *	add: prototypes for functions
+ *
+ *	Revision 1.1  1998/07/30 14:52:12  gklug
+ *	Initial version.
+ *	Defines Event Classes, Event structs and queue management variables.
+ *
+ *
+ *
+ ******************************************************************************/
+
+/*
+ * SKQUEUE.H	contains all defines and types for the event queue
+ */
+
+#ifndef _SKQUEUE_H_
+#define _SKQUEUE_H_
+
+
+/*
+ * define the event classes to be served
+ */
+#define	SKGE_DRV	1	/* Driver Event Class */
+#define	SKGE_RLMT	2	/* RLMT Event Class */
+#define	SKGE_I2C	3	/* i2C Event Class */
+#define	SKGE_PNMI	4	/* PNMI Event Class */
+#define	SKGE_CSUM	5	/* Checksum Event Class */
+#define	SKGE_HWAC	6	/* Hardware Access Event Class */
+
+#define	SKGE_SWT	9	/* Software Timer Event Class */
+#define	SKGE_LACP	10	/* LACP Aggregation Event Class */
+#define	SKGE_RSF	11	/* RSF Aggregation Event Class */
+#define	SKGE_MARKER	12	/* MARKER Aggregation Event Class */
+#define	SKGE_FD		13	/* FD Distributor Event Class */
+
+/*
+ * define event queue as circular buffer
+ */
+#define SK_MAX_EVENT	64
+
+/*
+ * Parameter union for the Para stuff
+ */
+typedef	union u_EvPara {
+	void	*pParaPtr;	/* Parameter Pointer */
+	SK_U64	Para64;		/* Parameter 64bit version */
+	SK_U32	Para32[2];	/* Parameter Array of 32bit parameters */
+} SK_EVPARA;
+
+/*
+ * Event Queue
+ *	skqueue.c
+ * events are class/value pairs
+ *	class	is addressee, e.g. RMT, PCM etc.
+ *	value	is command, e.g. line state change, ring op change etc.
+ */
+typedef	struct s_EventElem {
+	SK_U32		Class ;			/* Event class */
+	SK_U32		Event ;			/* Event value */
+	SK_EVPARA	Para ;			/* Event parameter */
+} SK_EVENTELEM;
+
+typedef	struct s_Queue {
+	SK_EVENTELEM	EvQueue[SK_MAX_EVENT];
+	SK_EVENTELEM	*EvPut ;
+	SK_EVENTELEM	*EvGet ;
+} SK_QUEUE;
+
+extern	void SkEventInit(SK_AC *pAC, SK_IOC Ioc, int Level);
+extern	void SkEventQueue(SK_AC *pAC, SK_U32 Class, SK_U32 Event,
+	SK_EVPARA Para);
+extern	int SkEventDispatcher(SK_AC *pAC,SK_IOC Ioc);
+
+
+/* Define Error Numbers and messages */
+#define	SKERR_Q_E001	(SK_ERRBASE_QUEUE+0)
+#define	SKERR_Q_E001MSG	"Event queue overflow"
+#define	SKERR_Q_E002	(SKERR_Q_E001+1)
+#define	SKERR_Q_E002MSG	"Undefined event class"
+#endif	/* _SKQUEUE_H_ */
diff --git a/drivers/net/sk98lin/h/skrlmt.h b/drivers/net/sk98lin/h/skrlmt.h
new file mode 100644
index 0000000..04d025b
--- /dev/null
+++ b/drivers/net/sk98lin/h/skrlmt.h
@@ -0,0 +1,563 @@
+/******************************************************************************
+ *
+ * Name:	skrlmt.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.35 $
+ * Date:	$Date: 2003/01/31 14:12:41 $
+ * Purpose:	Header file for Redundant Link ManagemenT.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2001 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skrlmt.h,v $
+ *	Revision 1.35  2003/01/31 14:12:41  mkunz
+ *	single port adapter runs now with two identical MAC addresses
+ *
+ *	Revision 1.34  2002/09/23 15:13:41  rwahl
+ *	Editorial changes.
+ *
+ *	Revision 1.33  2001/07/03 12:16:48  mkunz
+ *	New Flag ChgBcPrio (Change priority of last broadcast received)
+ *
+ *	Revision 1.32  2001/02/14 14:06:31  rassmann
+ *	Editorial changes.
+ *
+ *	Revision 1.31  2001/02/05 14:25:26  rassmann
+ *	Prepared RLMT for transparent operation.
+ *
+ *	Revision 1.30  2001/01/22 13:41:39  rassmann
+ *	Supporting two nets on dual-port adapters.
+ *
+ *	Revision 1.29  2000/11/17 08:58:00  rassmann
+ *	Moved CheckSwitch from SK_RLMT_PACKET_RECEIVED to SK_RLMT_TIM event.
+ *
+ *	Revision 1.28  2000/11/09 12:24:34  rassmann
+ *	Editorial changes.
+ *
+ *	Revision 1.27  1999/11/22 13:59:56  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.26  1999/10/04 14:01:19  rassmann
+ *	Corrected reaction to reception of BPDU frames (#10441).
+ *
+ *	Revision 1.25  1999/07/20 12:53:39  rassmann
+ *	Fixed documentation errors for lookahead macros.
+ *
+ *	Revision 1.24  1999/05/28 11:15:56  rassmann
+ *	Changed behaviour to reflect Design Spec v1.2.
+ *	Controlling Link LED(s).
+ *	Introduced RLMT Packet Version field in RLMT Packet.
+ *	Newstyle lookahead macros (checking meta-information before looking at
+ *	  the packet).
+ *
+ *	Revision 1.23  1999/01/28 12:50:42  rassmann
+ *	Not using broadcast time stamps in CheckLinkState mode.
+ *
+ *	Revision 1.22  1999/01/27 14:13:04  rassmann
+ *	Monitoring broadcast traffic.
+ *	Switching more reliably and not too early if switch is
+ *	 configured for spanning tree.
+ *
+ *	Revision 1.21  1998/12/08 13:11:25  rassmann
+ *	Stopping SegTimer at RlmtStop.
+ *
+ *	Revision 1.20  1998/11/24 12:37:33  rassmann
+ *	Implemented segmentation check.
+ *
+ *	Revision 1.19  1998/11/17 13:43:06  rassmann
+ *	Handling (logical) tx failure.
+ *	Sending packet on logical address after PORT_SWITCH.
+ *
+ *	Revision 1.18  1998/11/13 16:56:56  rassmann
+ *	Added macro version of SkRlmtLookaheadPacket.
+ *
+ *	Revision 1.17  1998/11/06 18:06:05  rassmann
+ *	Corrected timing when RLMT checks fail.
+ *	Clearing tx counter earlier in periodical checks.
+ *
+ *	Revision 1.16  1998/11/03 13:53:50  rassmann
+ *	RLMT should switch now (at least in mode 3).
+ *
+ *	Revision 1.15  1998/10/22 11:39:52  rassmann
+ *	Corrected signed/unsigned mismatches.
+ *	Corrected receive list handling and address recognition.
+ *
+ *	Revision 1.14  1998/10/15 15:16:36  rassmann
+ *	Finished Spanning Tree checking.
+ *	Checked with lint.
+ *
+ *	Revision 1.13  1998/09/24 19:16:08  rassmann
+ *	Code cleanup.
+ *	Introduced Timer for PORT_DOWN due to no RX.
+ *
+ *	Revision 1.12  1998/09/16 11:09:52  rassmann
+ *	Syntax corrections.
+ *
+ *	Revision 1.11  1998/09/15 11:28:50  rassmann
+ *	Syntax corrections.
+ *
+ *	Revision 1.10  1998/09/14 17:07:38  rassmann
+ *	Added code for port checking via LAN.
+ *	Changed Mbuf definition.
+ *
+ *	Revision 1.9  1998/09/07 11:14:15  rassmann
+ *	Syntax corrections.
+ *
+ *	Revision 1.8  1998/09/07 09:06:08  rassmann
+ *	Syntax corrections.
+ *
+ *	Revision 1.7  1998/09/04 19:41:34  rassmann
+ *	Syntax corrections.
+ *	Started entering code for checking local links.
+ *
+ *	Revision 1.6  1998/09/04 12:14:28  rassmann
+ *	Interface cleanup.
+ *
+ *	Revision 1.5  1998/09/02 16:55:29  rassmann
+ *	Updated to reflect new DRV/HWAC/RLMT interface.
+ *
+ *	Revision 1.4  1998/09/02 07:26:02  afischer
+ *	typedef for SK_RLMT_PORT
+ *
+ *	Revision 1.3  1998/08/27 14:29:03  rassmann
+ *	Code cleanup.
+ *
+ *	Revision 1.2  1998/08/27 14:26:25  rassmann
+ *	Updated interface.
+ *
+ *	Revision 1.1  1998/08/21 08:29:10  rassmann
+ *	First public version.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This is the header file for Redundant Link ManagemenT.
+ *
+ * Include File Hierarchy:
+ *
+ *	"skdrv1st.h"
+ *	...
+ *	"sktypes.h"
+ *	"skqueue.h"
+ *	"skaddr.h"
+ *	"skrlmt.h"
+ *	...
+ *	"skdrv2nd.h"
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKRLMT_H
+#define __INC_SKRLMT_H
+
+#ifdef __cplusplus
+#error C++ is not yet supported.
+extern "C" {
+#endif	/* cplusplus */
+
+/* defines ********************************************************************/
+
+#define	SK_RLMT_NET_DOWN_TEMP	1	/* NET_DOWN due to last port down. */
+#define	SK_RLMT_NET_DOWN_FINAL	2	/* NET_DOWN due to RLMT_STOP. */
+
+/* ----- Default queue sizes - must be multiples of 8 KB ----- */
+
+/* Less than 8 KB free in RX queue => pause frames. */
+#define SK_RLMT_STANDBY_QRXSIZE	128	/* Size of rx standby queue in KB. */
+#define SK_RLMT_STANDBY_QXASIZE	32	/* Size of async standby queue in KB. */
+#define SK_RLMT_STANDBY_QXSSIZE	0	/* Size of sync standby queue in KB. */
+
+#define SK_RLMT_MAX_TX_BUF_SIZE	60	/* Maximum RLMT transmit size. */
+
+/* ----- PORT states ----- */
+
+#define SK_RLMT_PS_INIT			0	/* Port state: Init. */
+#define SK_RLMT_PS_LINK_DOWN	1	/* Port state: Link down. */
+#define SK_RLMT_PS_DOWN			2	/* Port state: Port down. */
+#define SK_RLMT_PS_GOING_UP		3	/* Port state: Going up. */
+#define SK_RLMT_PS_UP			4	/* Port state: Up. */
+
+/* ----- RLMT states ----- */
+
+#define SK_RLMT_RS_INIT			0	/* RLMT state: Init. */
+#define SK_RLMT_RS_NET_DOWN		1	/* RLMT state: Net down. */
+#define SK_RLMT_RS_NET_UP		2	/* RLMT state: Net up. */
+
+/* ----- PORT events ----- */
+
+#define SK_RLMT_LINK_UP			1001	/* Link came up. */
+#define SK_RLMT_LINK_DOWN		1002	/* Link went down. */
+#define SK_RLMT_PORT_ADDR		1003	/* Port address changed. */
+
+/* ----- RLMT events ----- */
+
+#define SK_RLMT_START			2001	/* Start RLMT. */
+#define SK_RLMT_STOP			2002	/* Stop RLMT. */
+#define SK_RLMT_PACKET_RECEIVED	2003	/* Packet was received for RLMT. */
+#define SK_RLMT_STATS_CLEAR		2004	/* Clear statistics. */
+#define SK_RLMT_STATS_UPDATE	2005	/* Update statistics. */
+#define SK_RLMT_PREFPORT_CHANGE	2006	/* Change preferred port. */
+#define SK_RLMT_MODE_CHANGE		2007	/* New RlmtMode. */
+#define SK_RLMT_SET_NETS		2008	/* Number of Nets (1 or 2). */
+
+/* ----- RLMT mode bits ----- */
+
+/*
+ * CAUTION:	These defines are private to RLMT.
+ *			Please use the RLMT mode defines below.
+ */
+
+#define SK_RLMT_CHECK_LINK		  1		/* Check Link. */
+#define SK_RLMT_CHECK_LOC_LINK	  2		/* Check other link on same adapter. */
+#define SK_RLMT_CHECK_SEG		  4		/* Check segmentation. */
+
+#ifndef RLMT_CHECK_REMOTE
+#define SK_RLMT_CHECK_OTHERS	SK_RLMT_CHECK_LOC_LINK
+#else	/* RLMT_CHECK_REMOTE */
+#define SK_RLMT_CHECK_REM_LINK	  8		/* Check link(s) on other adapter(s). */
+#define SK_RLMT_MAX_REMOTE_PORTS_CHECKED	3
+#define SK_RLMT_CHECK_OTHERS	\
+		(SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK)
+#endif	/* RLMT_CHECK_REMOTE */
+
+#ifndef SK_RLMT_ENABLE_TRANSPARENT
+#define SK_RLMT_TRANSPARENT		  0		/* RLMT transparent - inactive. */
+#else	/* SK_RLMT_ENABLE_TRANSPARENT */
+#define SK_RLMT_TRANSPARENT		128		/* RLMT transparent. */
+#endif	/* SK_RLMT_ENABLE_TRANSPARENT */
+
+/* ----- RLMT modes ----- */
+
+/* Check Link State. */
+#define SK_RLMT_MODE_CLS	(SK_RLMT_CHECK_LINK)
+
+/* Check Local Ports: check other links on the same adapter. */
+#define SK_RLMT_MODE_CLP	(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK)
+
+/* Check Local Ports and Segmentation Status. */
+#define SK_RLMT_MODE_CLPSS	\
+		(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_SEG)
+
+#ifdef RLMT_CHECK_REMOTE
+/* Check Local and Remote Ports: check links (local or remote). */
+	Name of define TBD!
+#define SK_RLMT_MODE_CRP	\
+		(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK)
+
+/* Check Local and Remote Ports and Segmentation Status. */
+	Name of define TBD!
+#define SK_RLMT_MODE_CRPSS	\
+		(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | \
+		SK_RLMT_CHECK_REM_LINK | SK_RLMT_CHECK_SEG)
+#endif	/* RLMT_CHECK_REMOTE */
+
+/* ----- RLMT lookahead result bits ----- */
+
+#define SK_RLMT_RX_RLMT			1	/* Give packet to RLMT. */
+#define SK_RLMT_RX_PROTOCOL		2	/* Give packet to protocol. */
+
+/* Macros */
+
+#if 0
+SK_AC		*pAC		/* adapter context */
+SK_U32		PortNum		/* receiving port */
+unsigned	PktLen		/* received packet's length */
+SK_BOOL		IsBc		/* Flag: packet is broadcast */
+unsigned	*pOffset	/* offs. of bytes to present to SK_RLMT_LOOKAHEAD */
+unsigned	*pNumBytes	/* #Bytes to present to SK_RLMT_LOOKAHEAD */
+#endif	/* 0 */
+
+#define SK_RLMT_PRE_LOOKAHEAD(pAC,PortNum,PktLen,IsBc,pOffset,pNumBytes) { \
+	SK_AC	*_pAC; \
+	SK_U32	_PortNum; \
+	_pAC = (pAC); \
+	_PortNum = (SK_U32)(PortNum); \
+	/* _pAC->Rlmt.Port[_PortNum].PacketsRx++; */ \
+	_pAC->Rlmt.Port[_PortNum].PacketsPerTimeSlot++; \
+    if (_pAC->Rlmt.RlmtOff) { \
+		*(pNumBytes) = 0; \
+    } \
+    else {\
+	if ((_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_TRANSPARENT) != 0) { \
+		*(pNumBytes) = 0; \
+	} \
+	else if (IsBc) { \
+		if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode != SK_RLMT_MODE_CLS) { \
+			*(pNumBytes) = 6; \
+			*(pOffset) = 6; \
+		} \
+		else { \
+			*(pNumBytes) = 0; \
+		} \
+	} \
+	else { \
+		if ((PktLen) > SK_RLMT_MAX_TX_BUF_SIZE) { \
+			/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+			*(pNumBytes) = 0; \
+		} \
+		else { \
+			*(pNumBytes) = 6; \
+			*(pOffset) = 0; \
+		} \
+	} \
+    } \
+}
+
+#if 0
+SK_AC		*pAC		/* adapter context */
+SK_U32		PortNum		/* receiving port */
+SK_U8		*pLaPacket,	/* received packet's data (points to pOffset) */
+SK_BOOL		IsBc		/* Flag: packet is broadcast */
+SK_BOOL		IsMc		/* Flag: packet is multicast */
+unsigned	*pForRlmt	/* Result: bits SK_RLMT_RX_RLMT, SK_RLMT_RX_PROTOCOL */
+SK_RLMT_LOOKAHEAD() expects *pNumBytes from
+packet offset *pOffset (s.a.) at *pLaPacket.
+
+If you use SK_RLMT_LOOKAHEAD in a path where you already know if the packet is
+BC, MC, or UC, you should use constants for IsBc and IsMc, so that your compiler
+can trash unneeded parts of the if construction.
+#endif	/* 0 */
+
+#define SK_RLMT_LOOKAHEAD(pAC,PortNum,pLaPacket,IsBc,IsMc,pForRlmt) { \
+	SK_AC	*_pAC; \
+	SK_U32	_PortNum; \
+	SK_U8	*_pLaPacket; \
+	_pAC = (pAC); \
+	_PortNum = (SK_U32)(PortNum); \
+	_pLaPacket = (SK_U8 *)(pLaPacket); \
+	if (IsBc) {\
+		if (!SK_ADDR_EQUAL(_pLaPacket, _pAC->Addr.Net[_pAC->Rlmt.Port[ \
+			_PortNum].Net->NetNumber].CurrentMacAddress.a)) { \
+			_pAC->Rlmt.Port[_PortNum].BcTimeStamp = SkOsGetTime(_pAC); \
+			_pAC->Rlmt.CheckSwitch = SK_TRUE; \
+		} \
+		/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+		*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+	} \
+	else if (IsMc) { \
+		if (SK_ADDR_EQUAL(_pLaPacket, BridgeMcAddr.a)) { \
+			_pAC->Rlmt.Port[_PortNum].BpduPacketsPerTimeSlot++; \
+			if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_CHECK_SEG) { \
+				*(pForRlmt) = SK_RLMT_RX_RLMT | SK_RLMT_RX_PROTOCOL; \
+			} \
+			else { \
+				*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+			} \
+		} \
+		else if (SK_ADDR_EQUAL(_pLaPacket, SkRlmtMcAddr.a)) { \
+			*(pForRlmt) = SK_RLMT_RX_RLMT; \
+		} \
+		else { \
+			/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+			*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+		} \
+	} \
+	else { \
+		if (SK_ADDR_EQUAL( \
+			_pLaPacket, \
+			_pAC->Addr.Port[_PortNum].CurrentMacAddress.a)) { \
+			*(pForRlmt) = SK_RLMT_RX_RLMT; \
+		} \
+		else { \
+			/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+			*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+		} \
+	} \
+}
+
+#ifdef SK_RLMT_FAST_LOOKAHEAD
+Error: SK_RLMT_FAST_LOOKAHEAD no longer used. Use new macros for lookahead.
+#endif	/* SK_RLMT_FAST_LOOKAHEAD */
+#ifdef SK_RLMT_SLOW_LOOKAHEAD
+Error: SK_RLMT_SLOW_LOOKAHEAD no longer used. Use new macros for lookahead.
+#endif	/* SK_RLMT_SLOW_LOOKAHEAD */
+
+/* typedefs *******************************************************************/
+
+#ifdef SK_RLMT_MBUF_PRIVATE
+typedef struct s_RlmtMbuf {
+	some content
+} SK_RLMT_MBUF;
+#endif	/* SK_RLMT_MBUF_PRIVATE */
+
+
+#ifdef SK_LA_INFO
+typedef struct s_Rlmt_PacketInfo {
+	unsigned	PacketLength;			/* Length of packet. */
+	unsigned	PacketType;				/* Directed/Multicast/Broadcast. */
+} SK_RLMT_PINFO;
+#endif	/* SK_LA_INFO */
+
+
+typedef struct s_RootId {
+	SK_U8		Id[8];					/* Root Bridge Id. */
+} SK_RLMT_ROOT_ID;
+
+
+typedef struct s_port {
+	SK_MAC_ADDR	CheckAddr;
+	SK_BOOL		SuspectTx;
+} SK_PORT_CHECK;
+
+
+typedef struct s_RlmtNet SK_RLMT_NET;
+
+
+typedef struct s_RlmtPort {
+
+/* ----- Public part (read-only) ----- */
+
+	SK_U8			PortState;				/* Current state of this port. */
+
+	/* For PNMI */
+	SK_BOOL			LinkDown;
+	SK_BOOL			PortDown;
+	SK_U8			Align01;
+
+	SK_U32			PortNumber;				/* Number of port on adapter. */
+	SK_RLMT_NET *	Net;					/* Net port belongs to. */
+
+	SK_U64			TxHelloCts;
+	SK_U64			RxHelloCts;
+	SK_U64			TxSpHelloReqCts;
+	SK_U64			RxSpHelloCts;
+
+/* ----- Private part ----- */
+
+/*	SK_U64			PacketsRx; */				/* Total packets received. */
+	SK_U32			PacketsPerTimeSlot;		/* Packets rxed between TOs. */
+/*	SK_U32			DataPacketsPerTimeSlot; */	/* Data packets ... */
+	SK_U32			BpduPacketsPerTimeSlot;	/* BPDU packets rxed in TS. */
+	SK_U64			BcTimeStamp;			/* Time of last BC receive. */
+	SK_U64			GuTimeStamp;			/* Time of entering GOING_UP. */
+
+	SK_TIMER		UpTimer;				/* Timer struct Link/Port up. */
+	SK_TIMER		DownRxTimer;			/* Timer struct down rx. */
+	SK_TIMER		DownTxTimer;			/* Timer struct down tx. */
+
+	SK_U32			CheckingState;			/* Checking State. */
+
+	SK_ADDR_PORT *	AddrPort;
+
+	SK_U8			Random[4];				/* Random value. */
+	unsigned		PortsChecked;			/* #ports checked. */
+	unsigned		PortsSuspect;			/* #ports checked that are s. */
+	SK_PORT_CHECK	PortCheck[1];
+/*	SK_PORT_CHECK	PortCheck[SK_MAX_MACS - 1]; */
+
+	SK_BOOL			PortStarted;			/* Port is started. */
+	SK_BOOL			PortNoRx;				/* NoRx for >= 1 time slot. */
+	SK_BOOL			RootIdSet;
+	SK_RLMT_ROOT_ID	Root;					/* Root Bridge Id. */
+} SK_RLMT_PORT;
+
+
+struct s_RlmtNet {
+
+/* ----- Public part (read-only) ----- */
+
+	SK_U32			NetNumber;			/* Number of net. */
+
+	SK_RLMT_PORT *	Port[SK_MAX_MACS];	/* Ports that belong to this net. */
+	SK_U32			NumPorts;			/* Number of ports. */
+	SK_U32			PrefPort;			/* Preferred port. */
+
+	/* For PNMI */
+
+	SK_U32			ChgBcPrio;			/* Change Priority of last broadcast received */
+	SK_U32			RlmtMode;			/* Check ... */
+	SK_U32			ActivePort;			/* Active port. */
+	SK_U32			Preference;		/* 0xFFFFFFFF: Automatic. */
+
+	SK_U8			RlmtState;			/* Current RLMT state. */
+
+/* ----- Private part ----- */
+	SK_BOOL			RootIdSet;
+	SK_U16			Align01;
+
+	int				LinksUp;			/* #Links up. */
+	int				PortsUp;			/* #Ports up. */
+	SK_U32			TimeoutValue;		/* RLMT timeout value. */
+
+	SK_U32			CheckingState;		/* Checking State. */
+	SK_RLMT_ROOT_ID	Root;				/* Root Bridge Id. */
+
+	SK_TIMER		LocTimer;			/* Timer struct. */
+	SK_TIMER		SegTimer;			/* Timer struct. */
+};
+
+
+typedef struct s_Rlmt {
+
+/* ----- Public part (read-only) ----- */
+
+	SK_U32			NumNets;			/* Number of nets. */
+	SK_U32			NetsStarted;		/* Number of nets started. */
+	SK_RLMT_NET		Net[SK_MAX_NETS];	/* Array of available nets. */
+	SK_RLMT_PORT	Port[SK_MAX_MACS];	/* Array of available ports. */
+
+/* ----- Private part ----- */
+	SK_BOOL			CheckSwitch;
+	SK_BOOL			RlmtOff;            /* set to zero if the Mac addresses
+					   are equal or the second one
+					   is zero */
+	SK_U16			Align01;
+
+} SK_RLMT;
+
+
+extern	SK_MAC_ADDR	BridgeMcAddr;
+extern	SK_MAC_ADDR	SkRlmtMcAddr;
+
+/* function prototypes ********************************************************/
+
+
+#ifndef SK_KR_PROTO
+
+/* Functions provided by SkRlmt */
+
+/* ANSI/C++ compliant function prototypes */
+
+extern	void	SkRlmtInit(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Level);
+
+extern	int	SkRlmtEvent(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	SK_U32		Event,
+	SK_EVPARA	Para);
+
+#else	/* defined(SK_KR_PROTO) */
+
+/* Non-ANSI/C++ compliant function prototypes */
+
+#error KR-style function prototypes are not yet provided.
+
+#endif	/* defined(SK_KR_PROTO)) */
+
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
+
+#endif	/* __INC_SKRLMT_H */
diff --git a/drivers/net/sk98lin/h/sktimer.h b/drivers/net/sk98lin/h/sktimer.h
new file mode 100644
index 0000000..36f8ccb
--- /dev/null
+++ b/drivers/net/sk98lin/h/sktimer.h
@@ -0,0 +1,99 @@
+/******************************************************************************
+ *
+ * Name:	sktimer.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.9 $
+ * Date:	$Date: 1999/11/22 14:00:29 $
+ * Purpose:	Defines for the timer functions
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: sktimer.h,v $
+ *	Revision 1.9  1999/11/22 14:00:29  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.8  1998/09/08 08:48:02  gklug
+ *	add: init level handling
+ *
+ *	Revision 1.7  1998/08/20 12:31:29  gklug
+ *	fix: SK_TIMCTRL needs to be defined
+ *
+ *	Revision 1.6  1998/08/19 09:51:00  gklug
+ *	fix: remove struct keyword from c-code (see CCC) add typedefs
+ *
+ *	Revision 1.5  1998/08/17 13:43:21  gklug
+ *	chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR
+ *
+ *	Revision 1.4  1998/08/14 07:09:31  gklug
+ *	fix: chg pAc -> pAC
+ *
+ *	Revision 1.3  1998/08/07 12:54:24  gklug
+ *	fix: first compiled version
+ *
+ *	Revision 1.2  1998/08/07 09:35:29  gklug
+ *	add: Timer control struct for Adapters context
+ *	add: function prototypes
+ *
+ *	Revision 1.1  1998/08/05 11:27:01  gklug
+ *	First version: adapted from SMT
+ *
+ *
+ ******************************************************************************/
+
+/*
+ * SKTIMER.H	contains all defines and types for the timer functions
+ */
+
+#ifndef	_SKTIMER_H_
+#define _SKTIMER_H_
+
+#include "h/skqueue.h"
+
+/*
+ * SK timer
+ * - needed wherever a timer is used. Put this in your data structure
+ *   wherever you want.
+ */
+typedef	struct s_Timer SK_TIMER;
+
+struct s_Timer {
+	SK_TIMER	*TmNext ;	/* linked list */
+	SK_U32		TmClass ;	/* Timer Event class */
+	SK_U32		TmEvent ;	/* Timer Event value */
+	SK_EVPARA	TmPara ;	/* Timer Event parameter */
+	SK_U32		TmDelta ;	/* delta time */
+	int		TmActive ;	/* flag : active/inactive */
+} ;
+
+/*
+ * Timer control struct.
+ * - use in Adapters context name pAC->Tim
+ */
+typedef	struct s_TimCtrl {
+	SK_TIMER	*StQueue ;	/* Head of Timer queue */
+} SK_TIMCTRL ;
+
+extern void SkTimerInit(SK_AC *pAC,SK_IOC Ioc, int Level);
+extern void SkTimerStop(SK_AC *pAC,SK_IOC Ioc,SK_TIMER *pTimer);
+extern void SkTimerStart(SK_AC *pAC,SK_IOC Ioc,SK_TIMER *pTimer,
+	SK_U32 Time,SK_U32 Class,SK_U32 Event,SK_EVPARA Para);
+extern void SkTimerDone(SK_AC *pAC,SK_IOC Ioc);
+#endif	/* _SKTIMER_H_ */
diff --git a/drivers/net/sk98lin/h/sktypes.h b/drivers/net/sk98lin/h/sktypes.h
new file mode 100644
index 0000000..e657016
--- /dev/null
+++ b/drivers/net/sk98lin/h/sktypes.h
@@ -0,0 +1,87 @@
+/******************************************************************************
+ *
+ * Name:	sktypes.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.3 $
+ * Date:	$Date: 2003/02/25 14:16:40 $
+ * Purpose:	Define data types for Linux
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+ /*****************************************************************************
+ *
+ * History:
+ *
+ *	$Log: sktypes.h,v $
+ *	Revision 1.3  2003/02/25 14:16:40  mlindner
+ *	Fix: Copyright statement
+ *
+ *	Revision 1.2  1999/11/22 14:01:58  cgoos
+ *	Changed license header to GPL.
+ *	Now using Linux' fixed size types instead of standard types.
+ *
+ *	Revision 1.1  1999/02/16 07:41:40  cgoos
+ *	First version.
+ *
+ *
+ *
+ *****************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * In this file, all data types that are needed by the common modules
+ * are mapped to Linux data types.
+ *
+ *
+ * Include File Hierarchy:
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKTYPES_H
+#define __INC_SKTYPES_H
+
+
+/* defines *******************************************************************/
+
+/*
+ * Data types with a specific size. 'I' = signed, 'U' = unsigned.
+ */
+#define SK_I8	s8
+#define SK_U8	u8
+#define SK_I16	s16
+#define SK_U16	u16
+#define SK_I32	s32
+#define SK_U32	u32
+#define SK_I64	s64
+#define SK_U64	u64
+
+#define SK_UPTR	ulong		/* casting pointer <-> integral */
+
+/*
+* Boolean type.
+*/
+#define SK_BOOL		SK_U8
+#define SK_FALSE	0
+#define SK_TRUE		(!SK_FALSE)
+
+/* typedefs *******************************************************************/
+
+/* function prototypes ********************************************************/
+
+#endif	/* __INC_SKTYPES_H */
diff --git a/drivers/net/sk98lin/h/skversion.h b/drivers/net/sk98lin/h/skversion.h
new file mode 100644
index 0000000..ef46685
--- /dev/null
+++ b/drivers/net/sk98lin/h/skversion.h
@@ -0,0 +1,52 @@
+/******************************************************************************
+ *
+ * Name:	version.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.4 $
+ * Date:	$Date: 2003/02/25 14:16:40 $
+ * Purpose:	SK specific Error log support
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *	$Log: skversion.h,v $
+ *	Revision 1.4  2003/02/25 14:16:40  mlindner
+ *	Fix: Copyright statement
+ *
+ *	Revision 1.3  2003/02/25 13:30:18  mlindner
+ *	Add: Support for various vendors
+ *
+ *	Revision 1.1.2.1  2001/09/05 13:38:30  mlindner
+ *	Removed FILE description
+ *
+ *	Revision 1.1  2001/03/06 09:25:00  mlindner
+ *	first version
+ *
+ *
+ *
+ ******************************************************************************/
+
+
+static const char SysKonnectFileId[] = "@(#) (C) SysKonnect GmbH.";
+static const char SysKonnectBuildNumber[] =
+	"@(#)SK-BUILD: 6.05 PL: 01";
+
+#define BOOT_STRING	"sk98lin: Network Device Driver v6.05\n" \
+			"(C)Copyright 1999-2003 Marvell(R)."
+
+#define VER_STRING	"6.05"
diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h
new file mode 100644
index 0000000..1be34c5
--- /dev/null
+++ b/drivers/net/sk98lin/h/skvpd.h
@@ -0,0 +1,335 @@
+/******************************************************************************
+ *
+ * Name:	skvpd.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.15 $
+ * Date:	$Date: 2003/01/13 10:39:38 $
+ * Purpose:	Defines and Macros for VPD handling
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skvpd.h,v $
+ *	Revision 1.15  2003/01/13 10:39:38  rschmidt
+ *	Replaced define for PCI device Id for YUKON with GENESIS
+ *	Editorial changes
+ *
+ *	Revision 1.14  2002/11/14 15:18:10  gheinig
+ *	Added const specifier to key and buf parameters for VpdPara,VpdRead
+ *	and VpdWrite. This is necessary for the Diag 7 GUI API
+ *
+ *	Revision 1.13  2002/10/14 15:58:18  rschmidt
+ *	Added entry in rom_size struct s_vpd
+ *	Editorial changes
+ *
+ *	Revision 1.12  2002/09/09 14:43:51  mkarl
+ *	added PCI Id of Yukon for reading VPD in diag before the adapter has
+ *	been initialized
+ *	editorial changes
+ *
+ *	Revision 1.11  2002/07/26 13:19:16  mkarl
+ *	added support for Yukon
+ *	added vpd_size to VPD struct
+ *
+ *	Revision 1.10  2000/08/10 11:29:07  rassmann
+ *	Editorial changes.
+ *	Preserving 32-bit alignment in structs for the adapter context.
+ *	Removed unused function VpdWriteDword() (#if 0).
+ *	Made VpdReadKeyword() available for SKDIAG only.
+ *
+ *	Revision 1.9  1999/11/22 14:02:27  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.8  1999/03/11 14:26:40  malthoff
+ *	Replace __STDC__ with SK_KR_PROTO.
+ *
+ *	Revision 1.7  1998/10/28 07:27:17  gklug
+ *	rmv: SWAP macros
+ *	add: VPD_IN/OUT8 macros
+ *	chg: interface definition
+ *
+ *	Revision 1.6  1998/10/22 10:03:44  gklug
+ *	fix: use SK_OUT16 instead of SK_OUTW
+ *
+ *	Revision 1.5  1998/10/14 07:05:31  cgoos
+ *	Changed constants in SK_SWAP_32 to UL.
+ *
+ *	Revision 1.4  1998/08/19 08:14:09  gklug
+ *	fix: remove struct keyword as much as possible from the C-code (see CCC)
+ *
+ *	Revision 1.3  1998/08/18 08:18:56  malthoff
+ *	Modify VPD in and out macros for SK_DIAG
+ *
+ *	Revision 1.2  1998/07/03 14:49:08  malthoff
+ *	Add VPD_INxx() and VPD_OUTxx() macros for the Diagnostics tool.
+ *
+ *	Revision 1.1  1998/06/19 14:08:03  malthoff
+ *	Created.
+ *
+ *
+ ******************************************************************************/
+
+/*
+ * skvpd.h	contains Diagnostic specific defines for VPD handling
+ */
+
+#ifndef __INC_SKVPD_H_
+#define __INC_SKVPD_H_
+
+/*
+ * Define Resource Type Identifiers and VPD keywords
+ */
+#define	RES_ID		0x82	/* Resource Type ID String (Product Name) */
+#define RES_VPD_R	0x90	/* start of VPD read only area */
+#define RES_VPD_W	0x91	/* start of VPD read/write area */
+#define RES_END		0x78	/* Resource Type End Tag */
+
+#ifndef VPD_NAME
+#define VPD_NAME	"Name"	/* Product Name, VPD name of RES_ID */
+#endif	/* VPD_NAME */
+#define VPD_PN		"PN"	/* Adapter Part Number */
+#define	VPD_EC		"EC"	/* Adapter Engineering Level */
+#define VPD_MN		"MN"	/* Manufacture ID */
+#define VPD_SN		"SN"	/* Serial Number */
+#define VPD_CP		"CP"	/* Extended Capability */
+#define VPD_RV		"RV"	/* Checksum and Reserved */
+#define	VPD_YA		"YA"	/* Asset Tag Identifier */
+#define VPD_VL		"VL"	/* First Error Log Message (SK specific) */
+#define VPD_VF		"VF"	/* Second Error Log Message (SK specific) */
+#define VPD_RW		"RW"	/* Remaining Read / Write Area */
+
+/* 'type' values for vpd_setup_para() */
+#define VPD_RO_KEY	1	/* RO keys are "PN", "EC", "MN", "SN", "RV" */
+#define VPD_RW_KEY	2	/* RW keys are "Yx", "Vx", and "RW" */
+
+/* 'op' values for vpd_setup_para() */
+#define	ADD_KEY		1	/* add the key at the pos "RV" or "RW" */
+#define OWR_KEY		2	/* overwrite key if already exists */
+
+/*
+ * Define READ and WRITE Constants.
+ */
+
+#define VPD_DEV_ID_GENESIS 	0x4300
+
+#define	VPD_SIZE_YUKON		256
+#define	VPD_SIZE_GENESIS	512
+#define	VPD_SIZE			512
+#define VPD_READ	0x0000
+#define VPD_WRITE	0x8000
+
+#define VPD_STOP(pAC,IoC)	VPD_OUT16(pAC,IoC,PCI_VPD_ADR_REG,VPD_WRITE)
+
+#define VPD_GET_RES_LEN(p)	((unsigned int) \
+					(* (SK_U8 *)&(p)[1]) |\
+					((* (SK_U8 *)&(p)[2]) << 8))
+#define VPD_GET_VPD_LEN(p)	((unsigned int)(* (SK_U8 *)&(p)[2]))
+#define VPD_GET_VAL(p)		((char *)&(p)[3])
+
+#define VPD_MAX_LEN	50
+
+/* VPD status */
+	/* bit 7..1 reserved */
+#define VPD_VALID	(1<<0)	/* VPD data buffer, vpd_free_ro, */
+							/* and vpd_free_rw valid	 */
+
+/*
+ * VPD structs
+ */
+typedef	struct s_vpd_status {
+	unsigned short	Align01;			/* Alignment */
+	unsigned short	vpd_status;			/* VPD status, description see above */
+	int				vpd_free_ro;		/* unused bytes in read only area */
+	int				vpd_free_rw;		/* bytes available in read/write area */
+} SK_VPD_STATUS;
+
+typedef	struct s_vpd {
+	SK_VPD_STATUS	v;					/* VPD status structure */
+	char			vpd_buf[VPD_SIZE];	/* VPD buffer */
+	int				rom_size;			/* VPD ROM Size from PCI_OUR_REG_2 */
+	int				vpd_size;			/* saved VPD-size */
+} SK_VPD;
+
+typedef	struct s_vpd_para {
+	unsigned int	p_len;	/* parameter length */
+	char			*p_val;	/* points to the value */
+} SK_VPD_PARA;
+
+/*
+ * structure of Large Resource Type Identifiers
+ */
+
+/* was removed because of alignment problems */
+
+/*
+ * structure of VPD keywords
+ */
+typedef	struct s_vpd_key {
+	char			p_key[2];	/* 2 bytes ID string */
+	unsigned char	p_len;		/* 1 byte length */
+	char			p_val;		/* start of the value string */
+} SK_VPD_KEY;
+
+
+/*
+ * System specific VPD macros
+ */
+#ifndef SKDIAG
+#ifndef VPD_DO_IO
+#define VPD_OUT8(pAC,IoC,Addr,Val)	(void)SkPciWriteCfgByte(pAC,Addr,Val)
+#define VPD_OUT16(pAC,IoC,Addr,Val)	(void)SkPciWriteCfgWord(pAC,Addr,Val)
+#define VPD_OUT32(pAC,IoC,Addr,Val)	(void)SkPciWriteCfgDWord(pAC,Addr,Val)
+#define VPD_IN8(pAC,IoC,Addr,pVal)	(void)SkPciReadCfgByte(pAC,Addr,pVal)
+#define VPD_IN16(pAC,IoC,Addr,pVal)	(void)SkPciReadCfgWord(pAC,Addr,pVal)
+#define VPD_IN32(pAC,IoC,Addr,pVal)	(void)SkPciReadCfgDWord(pAC,Addr,pVal)
+#else	/* VPD_DO_IO */
+#define VPD_OUT8(pAC,IoC,Addr,Val)	SK_OUT8(IoC,PCI_C(Addr),Val)
+#define VPD_OUT16(pAC,IoC,Addr,Val)	SK_OUT16(IoC,PCI_C(Addr),Val)
+#define VPD_OUT32(pAC,IoC,Addr,Val)	SK_OUT32(IoC,PCI_C(Addr),Val)
+#define VPD_IN8(pAC,IoC,Addr,pVal)	SK_IN8(IoC,PCI_C(Addr),pVal)
+#define VPD_IN16(pAC,IoC,Addr,pVal)	SK_IN16(IoC,PCI_C(Addr),pVal)
+#define VPD_IN32(pAC,IoC,Addr,pVal)	SK_IN32(IoC,PCI_C(Addr),pVal)
+#endif	/* VPD_DO_IO */
+#else	/* SKDIAG */
+#define VPD_OUT8(pAC,Ioc,Addr,Val) {			\
+		if ((pAC)->DgT.DgUseCfgCycle)			\
+			SkPciWriteCfgByte(pAC,Addr,Val);	\
+		else									\
+			SK_OUT8(pAC,PCI_C(Addr),Val);		\
+		}
+#define VPD_OUT16(pAC,Ioc,Addr,Val) {			\
+		if ((pAC)->DgT.DgUseCfgCycle)			\
+			SkPciWriteCfgWord(pAC,Addr,Val);	\
+		else						\
+			SK_OUT16(pAC,PCI_C(Addr),Val);		\
+		}
+#define VPD_OUT32(pAC,Ioc,Addr,Val) {			\
+		if ((pAC)->DgT.DgUseCfgCycle)			\
+			SkPciWriteCfgDWord(pAC,Addr,Val);	\
+		else						\
+			SK_OUT32(pAC,PCI_C(Addr),Val); 		\
+		}
+#define VPD_IN8(pAC,Ioc,Addr,pVal) {			\
+		if ((pAC)->DgT.DgUseCfgCycle) 			\
+			SkPciReadCfgByte(pAC,Addr,pVal);	\
+		else						\
+			SK_IN8(pAC,PCI_C(Addr),pVal); 		\
+		}
+#define VPD_IN16(pAC,Ioc,Addr,pVal) {			\
+		if ((pAC)->DgT.DgUseCfgCycle) 			\
+			SkPciReadCfgWord(pAC,Addr,pVal);	\
+		else						\
+			SK_IN16(pAC,PCI_C(Addr),pVal); 		\
+		}
+#define VPD_IN32(pAC,Ioc,Addr,pVal) {			\
+		if ((pAC)->DgT.DgUseCfgCycle)			\
+			SkPciReadCfgDWord(pAC,Addr,pVal);	\
+		else						\
+			SK_IN32(pAC,PCI_C(Addr),pVal);		\
+		}
+#endif	/* nSKDIAG */
+
+/* function prototypes ********************************************************/
+
+#ifndef	SK_KR_PROTO
+#ifdef SKDIAG
+extern SK_U32	VpdReadDWord(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	int			addr);
+#endif	/* SKDIAG */
+
+extern int	VpdSetupPara(
+	SK_AC		*pAC,
+	const char	*key,
+	const char	*buf,
+	int			len,
+	int			type,
+	int			op);
+
+extern SK_VPD_STATUS	*VpdStat(
+	SK_AC		*pAC,
+	SK_IOC		IoC);
+
+extern int	VpdKeys(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	char		*buf,
+	int			*len,
+	int			*elements);
+
+extern int	VpdRead(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	const char	*key,
+	char		*buf,
+	int			*len);
+
+extern SK_BOOL	VpdMayWrite(
+	char		*key);
+
+extern int	VpdWrite(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	const char	*key,
+	const char	*buf);
+
+extern int	VpdDelete(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	char		*key);
+
+extern int	VpdUpdate(
+	SK_AC		*pAC,
+	SK_IOC		IoC);
+
+extern void	VpdErrLog(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	char		*msg);
+
+#ifdef	SKDIAG
+extern int	VpdReadBlock(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	char		*buf,
+	int			addr,
+	int			len);
+
+extern int	VpdWriteBlock(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	char		*buf,
+	int			addr,
+	int			len);
+#endif	/* SKDIAG */
+#else	/* SK_KR_PROTO */
+extern SK_U32	VpdReadDWord();
+extern int	VpdSetupPara();
+extern SK_VPD_STATUS	*VpdStat();
+extern int	VpdKeys();
+extern int	VpdRead();
+extern SK_BOOL	VpdMayWrite();
+extern int	VpdWrite();
+extern int	VpdDelete();
+extern int	VpdUpdate();
+extern void	VpdErrLog();
+#endif	/* SK_KR_PROTO */
+
+#endif	/* __INC_SKVPD_H_ */
diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h
new file mode 100644
index 0000000..2ef903a
--- /dev/null
+++ b/drivers/net/sk98lin/h/xmac_ii.h
@@ -0,0 +1,1738 @@
+/******************************************************************************
+ *
+ * Name:	xmac_ii.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.46 $
+ * Date:	$Date: 2003/01/28 09:47:45 $
+ * Purpose:	Defines and Macros for Gigabit Ethernet Controller
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: xmac_ii.h,v $
+ *	Revision 1.46  2003/01/28 09:47:45  rschmidt
+ *	Added defines for copper MDI/MDIX configuration
+ *	Added defines for LED Control Register
+ *	Editorial changes
+ *
+ *	Revision 1.45  2002/12/10 14:35:13  rschmidt
+ *	Corrected defines for Extended PHY Specific Control
+ *	Added defines for Ext. PHY Specific Ctrl 2 Reg. (Fiber specific)
+ *
+ *	Revision 1.44  2002/12/09 14:58:41  rschmidt
+ *	Added defines for Ext. PHY Specific Ctrl Reg. (downshift feature)
+ *	Added 'GMR_FS_UN_SIZE'-Bit to Rx GMAC FIFO Flush Mask
+ *
+ *	Revision 1.43  2002/12/05 10:14:45  rschmidt
+ *	Added define for GMAC's Half Duplex Burst Mode
+ *	Added define for Rx GMAC FIFO Flush Mask (default)
+ *
+ *	Revision 1.42  2002/11/12 16:48:19  rschmidt
+ *	Added defines for Cable Diagnostic Register (GPHY)
+ *	Editorial changes
+ *
+ *	Revision 1.41  2002/10/21 11:20:22  rschmidt
+ *	Added bit GMR_FS_GOOD_FC to GMR_FS_ANY_ERR
+ *	Editorial changes
+ *
+ *	Revision 1.40  2002/10/14 14:54:14  rschmidt
+ *	Added defines for GPHY Specific Status and GPHY Interrupt Status
+ *	Added bits PHY_M_IS_AN_ERROR and PHY_M_IS_FIFO_ERROR to PHY_M_DEF_MSK
+ *	Editorial changes
+ *
+ *	Revision 1.39  2002/10/10 15:53:44  mkarl
+ *	added some bit definitions for link speed status and LED's
+ *
+ *	Revision 1.38  2002/08/21 16:23:46  rschmidt
+ *	Added defines for PHY Specific Ctrl Reg
+ *	Editorial changes
+ *
+ *	Revision 1.37  2002/08/16 14:50:33  rschmidt
+ *	Added defines for Auto-Neg. Advertisement YUKON Fiber (88E1011S only)
+ *	Changed define PHY_M_DEF_MSK for GPHY IRQ Mask
+ *	Editorial changes
+ *
+ *	Revision 1.36  2002/08/12 13:21:10  rschmidt
+ *	Added defines for different Broadcom PHY Ids
+ *
+ *	Revision 1.35  2002/08/08 15:58:01  rschmidt
+ *	Added defines for Manual LED Override register (YUKON)
+ *	Editorial changes
+ *
+ *	Revision 1.34  2002/07/31 17:23:36  rwahl
+ *	Added define GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR).
+ *
+ *	Revision 1.33  2002/07/23 16:03:37  rschmidt
+ *	Added defines for GPHY registers
+ *	Editorial changes
+ *
+ *	Revision 1.32  2002/07/15 18:14:37  rwahl
+ *	Added GMAC MIB counters definitions.
+ *	Editorial changes.
+ *
+ *	Revision 1.31  2002/07/15 15:42:50  rschmidt
+ *	Removed defines from PHY specific reg. which are
+ *	common to all PHYs
+ *	Added defines for GMAC MIB Counters
+ *	Editorial changes
+ *
+ *	Revision 1.30  2002/06/05 08:22:12  rschmidt
+ *	Changed defines for GMAC Rx Control Register and Rx Status
+ *	Editorial changes
+ *
+ *	Revision 1.29  2002/04/25 11:43:56  rschmidt
+ *	Added define PHY_B_AS_PAUSE_MSK for BCom Pause Res.
+ *	Added new registers and defines for YUKON (GMAC, GPHY)
+ *	Added Receive Frame Status Encoding for YUKON
+ *	Editorial changes
+ *
+ *	Revision 1.28  2000/11/09 12:32:49  rassmann
+ *	Renamed variables.
+ *
+ *	Revision 1.27  2000/05/17 11:00:46  malthoff
+ *	Add bit for enable/disable power management in BCOM chip.
+ *
+ *	Revision 1.26  1999/11/22 14:03:00  cgoos
+ *	Changed license header to GPL.
+ *
+ *	Revision 1.25  1999/08/12 19:19:38  malthoff
+ *	Add PHY_B_AC_TX_TST bit according to BCOM A1 errata sheet.
+ *
+ *	Revision 1.24  1999/07/30 11:27:21  cgoos
+ *	Fixed a missing end-of-comment.
+ *
+ *	Revision 1.23  1999/07/30 07:03:31  malthoff
+ *	Cut some long comments.
+ *	Correct the XMAC PHY ID definitions.
+ *
+ *	Revision 1.22  1999/05/19 07:33:18  cgoos
+ *	Changes for 1000Base-T.
+ *
+ *	Revision 1.21  1999/03/25 07:46:11  malthoff
+ *	Add XM_HW_CFG, XM_TS_READ, and XM_TS_LOAD registers.
+ *
+ *	Revision 1.20  1999/03/12 13:36:09  malthoff
+ *	Remove __STDC__.
+ *
+ *	Revision 1.19  1998/12/10 12:22:54  gklug
+ *	fix: RX_PAGE must be in interrupt mask
+ *
+ *	Revision 1.18  1998/12/10 10:36:36  gklug
+ *	fix: swap of pause bits
+ *
+ *	Revision 1.17  1998/11/18 13:21:45  gklug
+ *	fix: Default interrupt mask
+ *
+ *	Revision 1.16  1998/10/29 15:53:21  gklug
+ *	fix: Default mask uses ASS (GP0) signal
+ *
+ *	Revision 1.15  1998/10/28 13:52:52  malthoff
+ *	Add new bits in RX_CMD register.
+ *
+ *	Revision 1.14  1998/10/19 15:34:53  gklug
+ *	fix: typos
+ *
+ *	Revision 1.13  1998/10/14 07:19:03  malthoff
+ *	bug fix: Every define which describes bit 31
+ *	must be declared as unsigned long 'UL'.
+ *	fix bit definitions of PHY_AN_RFB and PHY_AN_PAUSE.
+ *	Remove ANP defines. Rework the RFB defines.
+ *
+ *	Revision 1.12  1998/10/14 06:22:44  cgoos
+ *	Changed shifted constant to ULONG.
+ *
+ *	Revision 1.11  1998/10/14 05:43:26  gklug
+ *	add: shift pause coding
+ *	fix: PAUSE bits definition
+ *
+ *	Revision 1.10  1998/10/13 09:19:21  malthoff
+ *	Again change XMR_FS_ANY_ERR because of new info from XaQti.
+ *
+ *	Revision 1.9  1998/10/09 07:58:30  malthoff
+ *	Add XMR_FS_FCS_ERR to XMR_FS_ANY_ERR.
+ *
+ *	Revision 1.8  1998/10/09 07:18:17  malthoff
+ *	bug fix of a bug fix: XM_PAUSE_MODE and XM_DEF_MODE
+ *	are not inverted! Bug XM_DEF_MSK is inverted.
+ *
+ *	Revision 1.7  1998/10/05 08:04:32  malthoff
+ *	bug fix: XM_PAUSE_MODE and XM_DEF_MODE
+ *	must be inverted declarations.
+ *
+ *	Revision 1.6  1998/09/28 13:38:18  malthoff
+ *	Add default modes and masks XM_DEF_MSK,
+ *	XM_PAUSE_MODE and XM_DEF_MODE
+ *
+ *	Revision 1.5  1998/09/16 14:42:04  malthoff
+ *	Bug Fix: XM_GP_PORT is a 32 bit (not a 16 bit) register.
+ *
+ *	Revision 1.4  1998/08/20 14:59:47  malthoff
+ *	Rework this file after reading the XaQti data sheet
+ *	"Differences between Rev. B2 & Rev. C XMAC II".
+ *	This file is now 100% XMAC II Rev. C complained.
+ *
+ *	Revision 1.3  1998/06/29 12:18:23  malthoff
+ *	Correct XMR_FS_ANY_ERR definition.
+ *
+ *	Revision 1.2  1998/06/29 12:10:56  malthoff
+ *	Add define XMR_FS_ANY_ERR.
+ *
+ *	Revision 1.1  1998/06/19 13:37:17  malthoff
+ *	created.
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_XMAC_H
+#define __INC_XMAC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif	/* __cplusplus */
+
+/* defines ********************************************************************/
+
+/*
+ * XMAC II registers
+ *
+ * The XMAC registers are 16 or 32 bits wide.
+ * The XMACs host processor interface is set to 16 bit mode,
+ * therefore ALL registers will be addressed with 16 bit accesses.
+ *
+ * The following macros are provided to access the XMAC registers
+ * XM_IN16(), XM_OUT16, XM_IN32(), XM_OUT32(), XM_INADR(), XM_OUTADR(),
+ * XM_INHASH(), and XM_OUTHASH().
+ * The macros are defined in SkGeHw.h.
+ *
+ * Note:	NA reg	= Network Address e.g DA, SA etc.
+ *
+ */
+#define XM_MMU_CMD		0x0000	/* 16 bit r/w	MMU Command Register */
+	/* 0x0004:		reserved */
+#define XM_POFF			0x0008	/* 32 bit r/w	Packet Offset Register */
+#define XM_BURST		0x000c	/* 32 bit r/w	Burst Register for half duplex*/
+#define XM_1L_VLAN_TAG	0x0010	/* 16 bit r/w	One Level VLAN Tag ID */
+#define XM_2L_VLAN_TAG	0x0014	/* 16 bit r/w	Two Level VLAN Tag ID */
+	/* 0x0018 - 0x001e:	reserved */
+#define XM_TX_CMD		0x0020	/* 16 bit r/w	Transmit Command Register */
+#define XM_TX_RT_LIM	0x0024	/* 16 bit r/w	Transmit Retry Limit Register */
+#define XM_TX_STIME		0x0028	/* 16 bit r/w	Transmit Slottime Register */
+#define XM_TX_IPG		0x002c	/* 16 bit r/w	Transmit Inter Packet Gap */
+#define XM_RX_CMD		0x0030	/* 16 bit r/w	Receive Command Register */
+#define XM_PHY_ADDR		0x0034	/* 16 bit r/w	PHY Address Register */
+#define XM_PHY_DATA		0x0038	/* 16 bit r/w	PHY Data Register */
+	/* 0x003c: 		reserved */
+#define XM_GP_PORT		0x0040	/* 32 bit r/w	General Purpose Port Register */
+#define XM_IMSK			0x0044	/* 16 bit r/w	Interrupt Mask Register */
+#define XM_ISRC			0x0048	/* 16 bit r/o	Interrupt Status Register */
+#define XM_HW_CFG		0x004c	/* 16 bit r/w	Hardware Config Register */
+	/* 0x0050 - 0x005e:	reserved */
+#define XM_TX_LO_WM		0x0060	/* 16 bit r/w	Tx FIFO Low Water Mark */
+#define XM_TX_HI_WM		0x0062	/* 16 bit r/w	Tx FIFO High Water Mark */
+#define XM_TX_THR		0x0064	/* 16 bit r/w	Tx Request Threshold */
+#define XM_HT_THR		0x0066	/* 16 bit r/w	Host Request Threshold */
+#define XM_PAUSE_DA		0x0068	/* NA reg r/w	Pause Destination Address */
+	/* 0x006e: 		reserved */
+#define XM_CTL_PARA		0x0070	/* 32 bit r/w	Control Parameter Register */
+#define XM_MAC_OPCODE	0x0074	/* 16 bit r/w	Opcode for MAC control frames */
+#define XM_MAC_PTIME	0x0076	/* 16 bit r/w	Pause time for MAC ctrl frames*/
+#define XM_TX_STAT		0x0078	/* 32 bit r/o	Tx Status LIFO Register */
+
+	/* 0x0080 - 0x00fc:	16 NA reg r/w	Exact Match Address Registers */
+	/* 				use the XM_EXM() macro to address */
+#define XM_EXM_START	0x0080	/* r/w	Start Address of the EXM Regs */
+
+	/*
+	 * XM_EXM(Reg)
+	 *
+	 * returns the XMAC address offset of specified Exact Match Addr Reg
+	 *
+	 * para:	Reg	EXM register to addr	(0 .. 15)
+	 *
+	 * usage:	XM_INADDR(IoC, MAC_1, XM_EXM(i), &val[i]);
+	 */
+#define XM_EXM(Reg)	(XM_EXM_START + ((Reg) << 3))
+
+#define XM_SRC_CHK		0x0100	/* NA reg r/w	Source Check Address Register */
+#define XM_SA			0x0108	/* NA reg r/w	Station Address Register */
+#define XM_HSM			0x0110	/* 64 bit r/w	Hash Match Address Registers */
+#define XM_RX_LO_WM		0x0118	/* 16 bit r/w	Receive Low Water Mark */
+#define XM_RX_HI_WM		0x011a	/* 16 bit r/w	Receive High Water Mark */
+#define XM_RX_THR		0x011c	/* 32 bit r/w	Receive Request Threshold */
+#define XM_DEV_ID		0x0120	/* 32 bit r/o	Device ID Register */
+#define XM_MODE			0x0124	/* 32 bit r/w	Mode Register */
+#define XM_LSA			0x0128	/* NA reg r/o	Last Source Register */
+	/* 0x012e:		reserved */
+#define XM_TS_READ		0x0130	/* 32 bit r/o	Time Stamp Read Register */
+#define XM_TS_LOAD		0x0134	/* 32 bit r/o	Time Stamp Load Value */
+	/* 0x0138 - 0x01fe:	reserved */
+#define XM_STAT_CMD	0x0200	/* 16 bit r/w	Statistics Command Register */
+#define XM_RX_CNT_EV	0x0204	/* 32 bit r/o	Rx Counter Event Register */
+#define XM_TX_CNT_EV	0x0208	/* 32 bit r/o	Tx Counter Event Register */
+#define XM_RX_EV_MSK	0x020c	/* 32 bit r/w	Rx Counter Event Mask */
+#define XM_TX_EV_MSK	0x0210	/* 32 bit r/w	Tx Counter Event Mask */
+	/* 0x0204 - 0x027e:	reserved */
+#define XM_TXF_OK		0x0280	/* 32 bit r/o	Frames Transmitted OK Conuter */
+#define XM_TXO_OK_HI	0x0284	/* 32 bit r/o	Octets Transmitted OK High Cnt*/
+#define XM_TXO_OK_LO	0x0288	/* 32 bit r/o	Octets Transmitted OK Low Cnt */
+#define XM_TXF_BC_OK	0x028c	/* 32 bit r/o	Broadcast Frames Xmitted OK */
+#define XM_TXF_MC_OK	0x0290	/* 32 bit r/o	Multicast Frames Xmitted OK */
+#define XM_TXF_UC_OK	0x0294	/* 32 bit r/o	Unicast Frames Xmitted OK */
+#define XM_TXF_LONG		0x0298	/* 32 bit r/o	Tx Long Frame Counter */
+#define XM_TXE_BURST	0x029c	/* 32 bit r/o	Tx Burst Event Counter */
+#define XM_TXF_MPAUSE	0x02a0	/* 32 bit r/o	Tx Pause MAC Ctrl Frame Cnt */
+#define XM_TXF_MCTRL	0x02a4	/* 32 bit r/o	Tx MAC Ctrl Frame Counter */
+#define XM_TXF_SNG_COL	0x02a8	/* 32 bit r/o	Tx Single Collision Counter */
+#define XM_TXF_MUL_COL	0x02ac	/* 32 bit r/o	Tx Multiple Collision Counter */
+#define XM_TXF_ABO_COL	0x02b0	/* 32 bit r/o	Tx aborted due to Exces. Col. */
+#define XM_TXF_LAT_COL	0x02b4	/* 32 bit r/o	Tx Late Collision Counter */
+#define XM_TXF_DEF		0x02b8	/* 32 bit r/o	Tx Deferred Frame Counter */
+#define XM_TXF_EX_DEF	0x02bc	/* 32 bit r/o	Tx Excessive Deferall Counter */
+#define XM_TXE_FIFO_UR	0x02c0	/* 32 bit r/o	Tx FIFO Underrun Event Cnt */
+#define XM_TXE_CS_ERR	0x02c4	/* 32 bit r/o	Tx Carrier Sense Error Cnt */
+#define XM_TXP_UTIL		0x02c8	/* 32 bit r/o	Tx Utilization in % */
+	/* 0x02cc - 0x02ce:	reserved */
+#define XM_TXF_64B		0x02d0	/* 32 bit r/o	64 Byte Tx Frame Counter */
+#define XM_TXF_127B		0x02d4	/* 32 bit r/o	65-127 Byte Tx Frame Counter */
+#define XM_TXF_255B		0x02d8	/* 32 bit r/o	128-255 Byte Tx Frame Counter */
+#define XM_TXF_511B		0x02dc	/* 32 bit r/o	256-511 Byte Tx Frame Counter */
+#define XM_TXF_1023B	0x02e0	/* 32 bit r/o	512-1023 Byte Tx Frame Counter*/
+#define XM_TXF_MAX_SZ	0x02e4	/* 32 bit r/o	1024-MaxSize Byte Tx Frame Cnt*/
+	/* 0x02e8 - 0x02fe:	reserved */
+#define XM_RXF_OK		0x0300	/* 32 bit r/o	Frames Received OK */
+#define XM_RXO_OK_HI	0x0304	/* 32 bit r/o	Octets Received OK High Cnt */
+#define XM_RXO_OK_LO	0x0308	/* 32 bit r/o	Octets Received OK Low Counter*/
+#define XM_RXF_BC_OK	0x030c	/* 32 bit r/o	Broadcast Frames Received OK */
+#define XM_RXF_MC_OK	0x0310	/* 32 bit r/o	Multicast Frames Received OK */
+#define XM_RXF_UC_OK	0x0314	/* 32 bit r/o	Unicast Frames Received OK */
+#define XM_RXF_MPAUSE	0x0318	/* 32 bit r/o	Rx Pause MAC Ctrl Frame Cnt */
+#define XM_RXF_MCTRL	0x031c	/* 32 bit r/o	Rx MAC Ctrl Frame Counter */
+#define XM_RXF_INV_MP	0x0320	/* 32 bit r/o	Rx invalid Pause Frame Cnt */
+#define XM_RXF_INV_MOC	0x0324	/* 32 bit r/o	Rx Frames with inv. MAC Opcode*/
+#define XM_RXE_BURST	0x0328	/* 32 bit r/o	Rx Burst Event Counter */
+#define XM_RXE_FMISS	0x032c	/* 32 bit r/o	Rx Missed Frames Event Cnt */
+#define XM_RXF_FRA_ERR	0x0330	/* 32 bit r/o	Rx Framing Error Counter */
+#define XM_RXE_FIFO_OV	0x0334	/* 32 bit r/o	Rx FIFO overflow Event Cnt */
+#define XM_RXF_JAB_PKT	0x0338	/* 32 bit r/o	Rx Jabber Packet Frame Cnt */
+#define XM_RXE_CAR_ERR	0x033c	/* 32 bit r/o	Rx Carrier Event Error Cnt */
+#define XM_RXF_LEN_ERR	0x0340	/* 32 bit r/o	Rx in Range Length Error */
+#define XM_RXE_SYM_ERR	0x0344	/* 32 bit r/o	Rx Symbol Error Counter */
+#define XM_RXE_SHT_ERR	0x0348	/* 32 bit r/o	Rx Short Event Error Cnt */
+#define XM_RXE_RUNT		0x034c	/* 32 bit r/o	Rx Runt Event Counter */
+#define XM_RXF_LNG_ERR	0x0350	/* 32 bit r/o	Rx Frame too Long Error Cnt */
+#define XM_RXF_FCS_ERR	0x0354	/* 32 bit r/o	Rx Frame Check Seq. Error Cnt */
+	/* 0x0358 - 0x035a:	reserved */
+#define XM_RXF_CEX_ERR	0x035c	/* 32 bit r/o	Rx Carrier Ext Error Frame Cnt*/
+#define XM_RXP_UTIL		0x0360	/* 32 bit r/o	Rx Utilization in % */
+	/* 0x0364 - 0x0366:	reserved */
+#define XM_RXF_64B		0x0368	/* 32 bit r/o	64 Byte Rx Frame Counter */
+#define XM_RXF_127B		0x036c	/* 32 bit r/o	65-127 Byte Rx Frame Counter */
+#define XM_RXF_255B		0x0370	/* 32 bit r/o	128-255 Byte Rx Frame Counter */
+#define XM_RXF_511B		0x0374	/* 32 bit r/o	256-511 Byte Rx Frame Counter */
+#define XM_RXF_1023B	0x0378	/* 32 bit r/o	512-1023 Byte Rx Frame Counter*/
+#define XM_RXF_MAX_SZ	0x037c	/* 32 bit r/o	1024-MaxSize Byte Rx Frame Cnt*/
+	/* 0x02e8 - 0x02fe:	reserved */
+
+
+/*----------------------------------------------------------------------------*/
+/*
+ * XMAC Bit Definitions
+ *
+ * If the bit access behaviour differs from the register access behaviour
+ * (r/w, r/o) this is documented after the bit number.
+ * The following bit access behaviours are used:
+ *	(sc)	self clearing
+ *	(ro)	read only
+ */
+
+/*	XM_MMU_CMD	16 bit r/w	MMU Command Register */
+								/* Bit 15..13:	reserved */
+#define XM_MMU_PHY_RDY	(1<<12)	/* Bit 12:	PHY Read Ready */
+#define XM_MMU_PHY_BUSY	(1<<11)	/* Bit 11:	PHY Busy */
+#define XM_MMU_IGN_PF	(1<<10)	/* Bit 10:	Ignore Pause Frame */
+#define XM_MMU_MAC_LB	(1<<9)	/* Bit  9:	Enable MAC Loopback */
+								/* Bit  8:	reserved */
+#define XM_MMU_FRC_COL	(1<<7)	/* Bit  7:	Force Collision */
+#define XM_MMU_SIM_COL	(1<<6)	/* Bit  6:	Simulate Collision */
+#define XM_MMU_NO_PRE	(1<<5)	/* Bit  5:	No MDIO Preamble */
+#define XM_MMU_GMII_FD	(1<<4)	/* Bit  4:	GMII uses Full Duplex */
+#define XM_MMU_RAT_CTRL	(1<<3)	/* Bit  3:	Enable Rate Control */
+#define XM_MMU_GMII_LOOP (1<<2)	/* Bit  2:	PHY is in Loopback Mode */
+#define XM_MMU_ENA_RX	(1<<1)	/* Bit  1:	Enable Receiver */
+#define XM_MMU_ENA_TX	(1<<0)	/* Bit  0:	Enable Transmitter */
+
+
+/*	XM_TX_CMD	16 bit r/w	Transmit Command Register */
+								/* Bit 15..7:	reserved */
+#define XM_TX_BK2BK		(1<<6)	/* Bit  6:	Ignor Carrier Sense (Tx Bk2Bk)*/
+#define XM_TX_ENC_BYP	(1<<5)	/* Bit  5:	Set Encoder in Bypass Mode */
+#define XM_TX_SAM_LINE	(1<<4)	/* Bit  4: (sc)	Start utilization calculation */
+#define XM_TX_NO_GIG_MD	(1<<3)	/* Bit  3:	Disable Carrier Extension */
+#define XM_TX_NO_PRE	(1<<2)	/* Bit  2:	Disable Preamble Generation */
+#define XM_TX_NO_CRC	(1<<1)	/* Bit  1:	Disable CRC Generation */
+#define XM_TX_AUTO_PAD	(1<<0)	/* Bit  0:	Enable Automatic Padding */
+
+
+/*	XM_TX_RT_LIM	16 bit r/w	Transmit Retry Limit Register */
+								/* Bit 15..5:	reserved */
+#define XM_RT_LIM_MSK	0x1f	/* Bit  4..0:	Tx Retry Limit */
+
+
+/*	XM_TX_STIME	16 bit r/w	Transmit Slottime Register */
+								/* Bit 15..7:	reserved */
+#define XM_STIME_MSK	0x7f	/* Bit  6..0:	Tx Slottime bits */
+
+
+/*	XM_TX_IPG	16 bit r/w	Transmit Inter Packet Gap */
+								/* Bit 15..8:	reserved */
+#define XM_IPG_MSK		0xff	/* Bit  7..0:	IPG value bits */
+
+
+/*	XM_RX_CMD	16 bit r/w	Receive Command Register */
+								/* Bit 15..9:	reserved */
+#define XM_RX_LENERR_OK (1<<8)	/* Bit  8	don't set Rx Err bit for */
+								/*		inrange error packets */
+#define XM_RX_BIG_PK_OK	(1<<7)	/* Bit  7	don't set Rx Err bit for */
+								/*		jumbo packets */
+#define XM_RX_IPG_CAP	(1<<6)	/* Bit  6	repl. type field with IPG */
+#define XM_RX_TP_MD		(1<<5)	/* Bit  5:	Enable transparent Mode */
+#define XM_RX_STRIP_FCS	(1<<4)	/* Bit  4:	Enable FCS Stripping */
+#define XM_RX_SELF_RX	(1<<3)	/* Bit  3: 	Enable Rx of own packets */
+#define XM_RX_SAM_LINE	(1<<2)	/* Bit  2: (sc)	Start utilization calculation */
+#define XM_RX_STRIP_PAD	(1<<1)	/* Bit  1:	Strip pad bytes of Rx frames */
+#define XM_RX_DIS_CEXT	(1<<0)	/* Bit  0:	Disable carrier ext. check */
+
+
+/*	XM_PHY_ADDR	16 bit r/w	PHY Address Register */
+								/* Bit 15..5:	reserved */
+#define XM_PHY_ADDR_SZ	0x1f	/* Bit  4..0:	PHY Address bits */
+
+
+/*	XM_GP_PORT	32 bit r/w	General Purpose Port Register */
+								/* Bit 31..7:	reserved */
+#define XM_GP_ANIP		(1L<<6)	/* Bit  6: (ro)	Auto-Neg. in progress */
+#define XM_GP_FRC_INT	(1L<<5)	/* Bit  5: (sc)	Force Interrupt */
+								/* Bit  4:	reserved */
+#define XM_GP_RES_MAC	(1L<<3)	/* Bit  3: (sc)	Reset MAC and FIFOs */
+#define XM_GP_RES_STAT	(1L<<2)	/* Bit  2: (sc)	Reset the statistics module */
+								/* Bit  1:	reserved */
+#define XM_GP_INP_ASS	(1L<<0)	/* Bit  0: (ro) GP Input Pin asserted */
+
+
+/*	XM_IMSK		16 bit r/w	Interrupt Mask Register */
+/*	XM_ISRC		16 bit r/o	Interrupt Status Register */
+								/* Bit 15:	reserved */
+#define XM_IS_LNK_AE	(1<<14) /* Bit 14:	Link Asynchronous Event */
+#define XM_IS_TX_ABORT	(1<<13) /* Bit 13:	Transmit Abort, late Col. etc */
+#define XM_IS_FRC_INT	(1<<12) /* Bit 12:	Force INT bit set in GP */
+#define XM_IS_INP_ASS	(1<<11)	/* Bit 11:	Input Asserted, GP bit 0 set */
+#define XM_IS_LIPA_RC	(1<<10)	/* Bit 10:	Link Partner requests config */
+#define XM_IS_RX_PAGE	(1<<9)	/* Bit  9:	Page Received */
+#define XM_IS_TX_PAGE	(1<<8)	/* Bit  8:	Next Page Loaded for Transmit */
+#define XM_IS_AND		(1<<7)	/* Bit  7:	Auto-Negotiation Done */
+#define XM_IS_TSC_OV	(1<<6)	/* Bit  6:	Time Stamp Counter Overflow */
+#define XM_IS_RXC_OV	(1<<5)	/* Bit  5:	Rx Counter Event Overflow */
+#define XM_IS_TXC_OV	(1<<4)	/* Bit  4:	Tx Counter Event Overflow */
+#define XM_IS_RXF_OV	(1<<3)	/* Bit  3:	Receive FIFO Overflow */
+#define XM_IS_TXF_UR	(1<<2)	/* Bit  2:	Transmit FIFO Underrun */
+#define XM_IS_TX_COMP	(1<<1)	/* Bit  1:	Frame Tx Complete */
+#define XM_IS_RX_COMP	(1<<0)	/* Bit  0:	Frame Rx Complete */
+
+#define XM_DEF_MSK	(~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE |\
+			XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | XM_IS_TXF_UR))
+
+
+/*	XM_HW_CFG	16 bit r/w	Hardware Config Register */
+								/* Bit 15.. 4:	reserved */
+#define XM_HW_GEN_EOP	(1<<3)	/* Bit  3:	generate End of Packet pulse */
+#define XM_HW_COM4SIG	(1<<2)	/* Bit  2:	use Comma Detect for Sig. Det.*/
+								/* Bit  1:	reserved */
+#define XM_HW_GMII_MD	(1<<0)	/* Bit  0:	GMII Interface selected */
+
+
+/*	XM_TX_LO_WM	16 bit r/w	Tx FIFO Low Water Mark */
+/*	XM_TX_HI_WM	16 bit r/w	Tx FIFO High Water Mark */
+								/* Bit 15..10	reserved */
+#define XM_TX_WM_MSK	0x01ff	/* Bit  9.. 0	Tx FIFO Watermark bits */
+
+/*	XM_TX_THR	16 bit r/w	Tx Request Threshold */
+/*	XM_HT_THR	16 bit r/w	Host Request Threshold */
+/*	XM_RX_THR	16 bit r/w	Rx Request Threshold */
+								/* Bit 15..11	reserved */
+#define XM_THR_MSK		0x03ff	/* Bit 10.. 0	Rx/Tx Request Threshold bits */
+
+
+/*	XM_TX_STAT	32 bit r/o	Tx Status LIFO Register */
+#define XM_ST_VALID		(1UL<<31)	/* Bit 31:	Status Valid */
+#define XM_ST_BYTE_CNT	(0x3fffL<<17)	/* Bit 30..17:	Tx frame Length */
+#define XM_ST_RETRY_CNT	(0x1fL<<12)	/* Bit 16..12:	Retry Count */
+#define XM_ST_EX_COL	(1L<<11)	/* Bit 11:	Excessive Collisions */
+#define XM_ST_EX_DEF	(1L<<10)	/* Bit 10:	Excessive Deferral */
+#define XM_ST_BURST		(1L<<9)		/* Bit  9:	p. xmitted in burst md*/
+#define XM_ST_DEFER		(1L<<8)		/* Bit  8:	packet was defered */
+#define XM_ST_BC		(1L<<7)		/* Bit  7:	Broadcast packet */
+#define XM_ST_MC		(1L<<6)		/* Bit  6:	Multicast packet */
+#define XM_ST_UC		(1L<<5)		/* Bit  5:	Unicast packet */
+#define XM_ST_TX_UR		(1L<<4)		/* Bit  4:	FIFO Underrun occured */
+#define XM_ST_CS_ERR	(1L<<3)		/* Bit  3:	Carrier Sense Error */
+#define XM_ST_LAT_COL	(1L<<2)		/* Bit  2:	Late Collision Error */
+#define XM_ST_MUL_COL	(1L<<1)		/* Bit  1:	Multiple Collisions */
+#define XM_ST_SGN_COL	(1L<<0)		/* Bit  0:	Single Collision */
+
+/*	XM_RX_LO_WM	16 bit r/w	Receive Low Water Mark */
+/*	XM_RX_HI_WM	16 bit r/w	Receive High Water Mark */
+									/* Bit 15..11:	reserved */
+#define XM_RX_WM_MSK	0x03ff		/* Bit 11.. 0:	Rx FIFO Watermark bits */
+
+
+/*	XM_DEV_ID	32 bit r/o	Device ID Register */
+#define XM_DEV_OUI	(0x00ffffffUL<<8)	/* Bit 31..8:	Device OUI */
+#define XM_DEV_REV	(0x07L << 5)		/* Bit  7..5:	Chip Rev Num */
+
+
+/*	XM_MODE		32 bit r/w	Mode Register */
+									/* Bit 31..27:	reserved */
+#define XM_MD_ENA_REJ	(1L<<26)	/* Bit 26:	Enable Frame Reject */
+#define XM_MD_SPOE_E	(1L<<25)	/* Bit 25:	Send Pause on Edge */
+									/* 		extern generated */
+#define XM_MD_TX_REP	(1L<<24)	/* Bit 24:	Transmit Repeater Mode */
+#define XM_MD_SPOFF_I	(1L<<23)	/* Bit 23:	Send Pause on FIFO full */
+									/*		intern generated */
+#define XM_MD_LE_STW	(1L<<22)	/* Bit 22:	Rx Stat Word in Little Endian */
+#define XM_MD_TX_CONT	(1L<<21)	/* Bit 21:	Send Continuous */
+#define XM_MD_TX_PAUSE	(1L<<20)	/* Bit 20: (sc)	Send Pause Frame */
+#define XM_MD_ATS		(1L<<19)	/* Bit 19:	Append Time Stamp */
+#define XM_MD_SPOL_I	(1L<<18)	/* Bit 18:	Send Pause on Low */
+									/*		intern generated */
+#define XM_MD_SPOH_I	(1L<<17)	/* Bit 17:	Send Pause on High */
+									/*		intern generated */
+#define XM_MD_CAP		(1L<<16)	/* Bit 16:	Check Address Pair */
+#define XM_MD_ENA_HASH	(1L<<15)	/* Bit 15:	Enable Hashing */
+#define XM_MD_CSA		(1L<<14)	/* Bit 14:	Check Station Address */
+#define XM_MD_CAA		(1L<<13)	/* Bit 13:	Check Address Array */
+#define XM_MD_RX_MCTRL	(1L<<12)	/* Bit 12:	Rx MAC Control Frame */
+#define XM_MD_RX_RUNT	(1L<<11)	/* Bit 11:	Rx Runt Frames */
+#define XM_MD_RX_IRLE	(1L<<10)	/* Bit 10:	Rx in Range Len Err Frame */
+#define XM_MD_RX_LONG	(1L<<9)		/* Bit  9:	Rx Long Frame */
+#define XM_MD_RX_CRCE	(1L<<8)		/* Bit  8:	Rx CRC Error Frame */
+#define XM_MD_RX_ERR	(1L<<7)		/* Bit  7:	Rx Error Frame */
+#define XM_MD_DIS_UC	(1L<<6)		/* Bit  6:	Disable Rx Unicast */
+#define XM_MD_DIS_MC	(1L<<5)		/* Bit  5:	Disable Rx Multicast */
+#define XM_MD_DIS_BC	(1L<<4)		/* Bit  4:	Disable Rx Broadcast */
+#define XM_MD_ENA_PROM	(1L<<3)		/* Bit  3:	Enable Promiscuous */
+#define XM_MD_ENA_BE	(1L<<2)		/* Bit  2:	Enable Big Endian */
+#define XM_MD_FTF		(1L<<1)		/* Bit  1: (sc)	Flush Tx FIFO */
+#define XM_MD_FRF		(1L<<0)		/* Bit  0: (sc)	Flush Rx FIFO */
+
+#define XM_PAUSE_MODE	(XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I)
+#define XM_DEF_MODE		(XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\
+				XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA)
+
+/*	XM_STAT_CMD	16 bit r/w	Statistics Command Register */
+								/* Bit 16..6:	reserved */
+#define XM_SC_SNP_RXC	(1<<5)	/* Bit  5: (sc)	Snap Rx Counters */
+#define XM_SC_SNP_TXC	(1<<4)	/* Bit  4: (sc)	Snap Tx Counters */
+#define XM_SC_CP_RXC	(1<<3)	/* Bit  3: 	Copy Rx Counters Continuously */
+#define XM_SC_CP_TXC	(1<<2)	/* Bit  2:	Copy Tx Counters Continuously */
+#define XM_SC_CLR_RXC	(1<<1)	/* Bit  1: (sc)	Clear Rx Counters */
+#define XM_SC_CLR_TXC	(1<<0)	/* Bit  0: (sc) Clear Tx Counters */
+
+
+/*	XM_RX_CNT_EV	32 bit r/o	Rx Counter Event Register */
+/*	XM_RX_EV_MSK	32 bit r/w	Rx Counter Event Mask */
+#define XMR_MAX_SZ_OV	(1UL<<31)	/* Bit 31:	1024-MaxSize Rx Cnt Ov*/
+#define XMR_1023B_OV	(1L<<30)	/* Bit 30:	512-1023Byte Rx Cnt Ov*/
+#define XMR_511B_OV		(1L<<29)	/* Bit 29:	256-511 Byte Rx Cnt Ov*/
+#define XMR_255B_OV		(1L<<28)	/* Bit 28:	128-255 Byte Rx Cnt Ov*/
+#define XMR_127B_OV		(1L<<27)	/* Bit 27:	65-127 Byte Rx Cnt Ov */
+#define XMR_64B_OV		(1L<<26)	/* Bit 26:	64 Byte Rx Cnt Ov */
+#define XMR_UTIL_OV		(1L<<25)	/* Bit 25:	Rx Util Cnt Overflow */
+#define XMR_UTIL_UR		(1L<<24)	/* Bit 24:	Rx Util Cnt Underrun */
+#define XMR_CEX_ERR_OV	(1L<<23)	/* Bit 23:	CEXT Err Cnt Ov */
+									/* Bit 22:	reserved */
+#define XMR_FCS_ERR_OV	(1L<<21)	/* Bit 21:	Rx FCS Error Cnt Ov */
+#define XMR_LNG_ERR_OV	(1L<<20)	/* Bit 20:	Rx too Long Err Cnt Ov*/
+#define XMR_RUNT_OV		(1L<<19)	/* Bit 19:	Runt Event Cnt Ov */
+#define XMR_SHT_ERR_OV	(1L<<18)	/* Bit 18:	Rx Short Ev Err Cnt Ov*/
+#define XMR_SYM_ERR_OV	(1L<<17)	/* Bit 17:	Rx Sym Err Cnt Ov */
+									/* Bit 16:	reserved */
+#define XMR_CAR_ERR_OV	(1L<<15)	/* Bit 15:	Rx Carr Ev Err Cnt Ov */
+#define XMR_JAB_PKT_OV	(1L<<14)	/* Bit 14:	Rx Jabb Packet Cnt Ov */
+#define XMR_FIFO_OV		(1L<<13)	/* Bit 13:	Rx FIFO Ov Ev Cnt Ov */
+#define XMR_FRA_ERR_OV	(1L<<12)	/* Bit 12:	Rx Framing Err Cnt Ov */
+#define XMR_FMISS_OV	(1L<<11)	/* Bit 11:	Rx Missed Ev Cnt Ov */
+#define XMR_BURST		(1L<<10)	/* Bit 10:	Rx Burst Event Cnt Ov */
+#define XMR_INV_MOC		(1L<<9)		/* Bit  9:	Rx with inv. MAC OC Ov*/
+#define XMR_INV_MP		(1L<<8)		/* Bit  8:	Rx inv Pause Frame Ov */
+#define XMR_MCTRL_OV	(1L<<7)		/* Bit  7:	Rx MAC Ctrl-F Cnt Ov */
+#define XMR_MPAUSE_OV	(1L<<6)		/* Bit  6:	Rx Pause MAC Ctrl-F Ov*/
+#define XMR_UC_OK_OV	(1L<<5)		/* Bit  5:	Rx Unicast Frame CntOv*/
+#define XMR_MC_OK_OV	(1L<<4)		/* Bit  4:	Rx Multicast Cnt Ov */
+#define XMR_BC_OK_OV	(1L<<3)		/* Bit  3:	Rx Broadcast Cnt Ov */
+#define XMR_OK_LO_OV	(1L<<2)		/* Bit  2:	Octets Rx OK Low CntOv*/
+#define XMR_OK_HI_OV	(1L<<1)		/* Bit  1:	Octets Rx OK Hi Cnt Ov*/
+#define XMR_OK_OV		(1L<<0)		/* Bit  0:	Frames Received Ok Ov */
+
+#define XMR_DEF_MSK		(XMR_OK_LO_OV | XMR_OK_HI_OV)
+
+/*	XM_TX_CNT_EV	32 bit r/o	Tx Counter Event Register */
+/*	XM_TX_EV_MSK	32 bit r/w	Tx Counter Event Mask */
+									/* Bit 31..26:	reserved */
+#define XMT_MAX_SZ_OV	(1L<<25)	/* Bit 25:	1024-MaxSize Tx Cnt Ov*/
+#define XMT_1023B_OV	(1L<<24)	/* Bit 24:	512-1023Byte Tx Cnt Ov*/
+#define XMT_511B_OV		(1L<<23)	/* Bit 23:	256-511 Byte Tx Cnt Ov*/
+#define XMT_255B_OV		(1L<<22)	/* Bit 22:	128-255 Byte Tx Cnt Ov*/
+#define XMT_127B_OV		(1L<<21)	/* Bit 21:	65-127 Byte Tx Cnt Ov */
+#define XMT_64B_OV		(1L<<20)	/* Bit 20:	64 Byte Tx Cnt Ov */
+#define XMT_UTIL_OV		(1L<<19)	/* Bit 19:	Tx Util Cnt Overflow */
+#define XMT_UTIL_UR		(1L<<18)	/* Bit 18:	Tx Util Cnt Underrun */
+#define XMT_CS_ERR_OV	(1L<<17)	/* Bit 17:	Tx Carr Sen Err Cnt Ov*/
+#define XMT_FIFO_UR_OV	(1L<<16)	/* Bit 16:	Tx FIFO Ur Ev Cnt Ov */
+#define XMT_EX_DEF_OV	(1L<<15)	/* Bit 15:	Tx Ex Deferall Cnt Ov */
+#define XMT_DEF			(1L<<14)	/* Bit 14:	Tx Deferred Cnt Ov */
+#define XMT_LAT_COL_OV	(1L<<13)	/* Bit 13:	Tx Late Col Cnt Ov */
+#define XMT_ABO_COL_OV	(1L<<12)	/* Bit 12:	Tx abo dueto Ex Col Ov*/
+#define XMT_MUL_COL_OV	(1L<<11)	/* Bit 11:	Tx Mult Col Cnt Ov */
+#define XMT_SNG_COL		(1L<<10)	/* Bit 10:	Tx Single Col Cnt Ov */
+#define XMT_MCTRL_OV	(1L<<9)		/* Bit  9:	Tx MAC Ctrl Counter Ov*/
+#define XMT_MPAUSE		(1L<<8)		/* Bit  8:	Tx Pause MAC Ctrl-F Ov*/
+#define XMT_BURST		(1L<<7)		/* Bit  7:	Tx Burst Event Cnt Ov */
+#define XMT_LONG		(1L<<6)		/* Bit  6:	Tx Long Frame Cnt Ov */
+#define XMT_UC_OK_OV	(1L<<5)		/* Bit  5:	Tx Unicast Cnt Ov */
+#define XMT_MC_OK_OV	(1L<<4)		/* Bit  4:	Tx Multicast Cnt Ov */
+#define XMT_BC_OK_OV	(1L<<3)		/* Bit  3:	Tx Broadcast Cnt Ov */
+#define XMT_OK_LO_OV	(1L<<2)		/* Bit  2:	Octets Tx OK Low CntOv*/
+#define XMT_OK_HI_OV	(1L<<1)		/* Bit  1:	Octets Tx OK Hi Cnt Ov*/
+#define XMT_OK_OV		(1L<<0)		/* Bit  0:	Frames Tx Ok Ov */
+
+#define XMT_DEF_MSK		(XMT_OK_LO_OV | XMT_OK_HI_OV)
+
+/*
+ * Receive Frame Status Encoding
+ */
+#define XMR_FS_LEN	(0x3fffUL<<18)	/* Bit 31..18:	Rx Frame Length */
+#define XMR_FS_2L_VLAN	(1L<<17)	/* Bit 17:	tagged wh 2Lev VLAN ID*/
+#define XMR_FS_1L_VLAN	(1L<<16)	/* Bit 16:	tagged wh 1Lev VLAN ID*/
+#define XMR_FS_BC		(1L<<15)	/* Bit 15:	Broadcast Frame */
+#define XMR_FS_MC		(1L<<14)	/* Bit 14:	Multicast Frame */
+#define XMR_FS_UC		(1L<<13)	/* Bit 13:	Unicast Frame */
+									/* Bit 12:	reserved */
+#define XMR_FS_BURST	(1L<<11)	/* Bit 11:	Burst Mode */
+#define XMR_FS_CEX_ERR	(1L<<10)	/* Bit 10:	Carrier Ext. Error */
+#define XMR_FS_802_3	(1L<<9)		/* Bit  9:	802.3 Frame */
+#define XMR_FS_COL_ERR	(1L<<8)		/* Bit  8:	Collision Error */
+#define XMR_FS_CAR_ERR	(1L<<7)		/* Bit  7:	Carrier Event Error */
+#define XMR_FS_LEN_ERR	(1L<<6)		/* Bit  6:	In-Range Length Error */
+#define XMR_FS_FRA_ERR	(1L<<5)		/* Bit  5:	Framing Error */
+#define XMR_FS_RUNT		(1L<<4)		/* Bit  4:	Runt Frame */
+#define XMR_FS_LNG_ERR	(1L<<3)		/* Bit  3:	Giant (Jumbo) Frame */
+#define XMR_FS_FCS_ERR	(1L<<2)		/* Bit  2:	Frame Check Sequ Err */
+#define XMR_FS_ERR		(1L<<1)		/* Bit  1:	Frame Error */
+#define XMR_FS_MCTRL	(1L<<0)		/* Bit  0:	MAC Control Packet */
+
+/*
+ * XMR_FS_ERR will be set if
+ *	XMR_FS_FCS_ERR, XMR_FS_LNG_ERR, XMR_FS_RUNT,
+ *	XMR_FS_FRA_ERR, XMR_FS_LEN_ERR, or XMR_FS_CEX_ERR
+ * is set. XMR_FS_LNG_ERR and XMR_FS_LEN_ERR will issue
+ * XMR_FS_ERR unless the corresponding bit in the Receive Command
+ * Register is set.
+ */
+#define XMR_FS_ANY_ERR	XMR_FS_ERR
+
+/*----------------------------------------------------------------------------*/
+/*
+ * XMAC-PHY Registers, indirect addressed over the XMAC
+ */
+#define PHY_XMAC_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_XMAC_STAT		0x01	/* 16 bit r/w	PHY Status Register */
+#define PHY_XMAC_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_XMAC_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_XMAC_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_XMAC_AUNE_LP	0x05	/* 16 bit r/o	Link Partner Abi Reg */
+#define PHY_XMAC_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_XMAC_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_XMAC_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link P Reg */
+	/* 0x09 - 0x0e:		reserved */
+#define PHY_XMAC_EXT_STAT	0x0f	/* 16 bit r/o	Ext Status Register */
+#define PHY_XMAC_RES_ABI	0x10	/* 16 bit r/o	PHY Resolved Ability */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * Broadcom-PHY Registers, indirect addressed over XMAC
+ */
+#define PHY_BCOM_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_BCOM_STAT		0x01	/* 16 bit r/o	PHY Status Register */
+#define PHY_BCOM_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_BCOM_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_BCOM_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_BCOM_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
+#define PHY_BCOM_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_BCOM_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_BCOM_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link P Reg */
+	/* Broadcom-specific registers */
+#define PHY_BCOM_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Ctrl Reg */
+#define PHY_BCOM_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
+	/* 0x0b - 0x0e:		reserved */
+#define PHY_BCOM_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
+#define PHY_BCOM_P_EXT_CTRL	0x10	/* 16 bit r/w	PHY Extended Ctrl Reg */
+#define PHY_BCOM_P_EXT_STAT	0x11	/* 16 bit r/o	PHY Extended Stat Reg */
+#define PHY_BCOM_RE_CTR		0x12	/* 16 bit r/w	Receive Error Counter */
+#define PHY_BCOM_FC_CTR		0x13	/* 16 bit r/w	False Carr Sense Cnt */
+#define PHY_BCOM_RNO_CTR	0x14	/* 16 bit r/w	Receiver NOT_OK Cnt */
+	/* 0x15 - 0x17:		reserved */
+#define PHY_BCOM_AUX_CTRL	0x18	/* 16 bit r/w	Auxiliary Control Reg */
+#define PHY_BCOM_AUX_STAT	0x19	/* 16 bit r/o	Auxiliary Stat Summary */
+#define PHY_BCOM_INT_STAT	0x1a	/* 16 bit r/o	Interrupt Status Reg */
+#define PHY_BCOM_INT_MASK	0x1b	/* 16 bit r/w	Interrupt Mask Reg */
+	/* 0x1c:		reserved */
+	/* 0x1d - 0x1f:		test registers */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * Marvel-PHY Registers, indirect addressed over GMAC
+ */
+#define PHY_MARV_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_MARV_STAT		0x01	/* 16 bit r/o	PHY Status Register */
+#define PHY_MARV_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_MARV_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_MARV_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_MARV_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
+#define PHY_MARV_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_MARV_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_MARV_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link P Reg */
+	/* Marvel-specific registers */
+#define PHY_MARV_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Ctrl Reg */
+#define PHY_MARV_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
+	/* 0x0b - 0x0e:		reserved */
+#define PHY_MARV_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
+#define PHY_MARV_PHY_CTRL	0x10	/* 16 bit r/w	PHY Specific Ctrl Reg */
+#define PHY_MARV_PHY_STAT	0x11	/* 16 bit r/o	PHY Specific Stat Reg */
+#define PHY_MARV_INT_MASK	0x12	/* 16 bit r/w	Interrupt Mask Reg */
+#define PHY_MARV_INT_STAT	0x13	/* 16 bit r/o	Interrupt Status Reg */
+#define PHY_MARV_EXT_CTRL	0x14	/* 16 bit r/w	Ext. PHY Specific Ctrl */
+#define PHY_MARV_RXE_CNT	0x15	/* 16 bit r/w	Receive Error Counter */
+#define PHY_MARV_EXT_ADR	0x16	/* 16 bit r/w	Ext. Ad. for Cable Diag. */
+	/* 0x17:		reserved */
+#define PHY_MARV_LED_CTRL	0x18	/* 16 bit r/w	LED Control Reg */
+#define PHY_MARV_LED_OVER	0x19	/* 16 bit r/w	Manual LED Override Reg */
+#define PHY_MARV_EXT_CTRL_2	0x1a	/* 16 bit r/w	Ext. PHY Specific Ctrl 2 */
+#define PHY_MARV_EXT_P_STAT	0x1b	/* 16 bit r/w	Ext. PHY Spec. Stat Reg */
+#define PHY_MARV_CABLE_DIAG	0x1c	/* 16 bit r/o	Cable Diagnostic Reg */
+	/* 0x1d - 0x1f:		reserved */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * Level One-PHY Registers, indirect addressed over XMAC
+ */
+#define PHY_LONE_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_LONE_STAT		0x01	/* 16 bit r/o	PHY Status Register */
+#define PHY_LONE_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_LONE_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_LONE_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_LONE_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
+#define PHY_LONE_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_LONE_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_LONE_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link Partner*/
+	/* Level One-specific registers */
+#define PHY_LONE_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Control Reg*/
+#define PHY_LONE_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
+	/* 0x0b -0x0e:		reserved */
+#define PHY_LONE_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
+#define PHY_LONE_PORT_CFG	0x10	/* 16 bit r/w	Port Configuration Reg*/
+#define PHY_LONE_Q_STAT		0x11	/* 16 bit r/o	Quick Status Reg */
+#define PHY_LONE_INT_ENAB	0x12	/* 16 bit r/w	Interrupt Enable Reg */
+#define PHY_LONE_INT_STAT	0x13	/* 16 bit r/o	Interrupt Status Reg */
+#define PHY_LONE_LED_CFG	0x14	/* 16 bit r/w	LED Configuration Reg */
+#define PHY_LONE_PORT_CTRL	0x15	/* 16 bit r/w	Port Control Reg */
+#define PHY_LONE_CIM		0x16	/* 16 bit r/o	CIM Reg */
+	/* 0x17 -0x1c:		reserved */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * National-PHY Registers, indirect addressed over XMAC
+ */
+#define PHY_NAT_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_NAT_STAT		0x01	/* 16 bit r/w	PHY Status Register */
+#define PHY_NAT_ID0			0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_NAT_ID1			0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_NAT_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_NAT_AUNE_LP		0x05	/* 16 bit r/o	Link Partner Ability Reg */
+#define PHY_NAT_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_NAT_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_NAT_NEPG_LP		0x08	/* 16 bit r/o	Next Page Link Partner Reg */
+	/* National-specific registers */
+#define PHY_NAT_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Control Reg */
+#define PHY_NAT_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
+	/* 0x0b -0x0e:		reserved */
+#define PHY_NAT_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Register */
+#define PHY_NAT_EXT_CTRL1	0x10	/* 16 bit r/o	Extended Control Reg1 */
+#define PHY_NAT_Q_STAT1		0x11	/* 16 bit r/o	Quick Status Reg1 */
+#define PHY_NAT_10B_OP		0x12	/* 16 bit r/o	10Base-T Operations Reg */
+#define PHY_NAT_EXT_CTRL2	0x13	/* 16 bit r/o	Extended Control Reg1 */
+#define PHY_NAT_Q_STAT2		0x14	/* 16 bit r/o	Quick Status Reg2 */
+	/* 0x15 -0x18:		reserved */
+#define PHY_NAT_PHY_ADDR	0x19	/* 16 bit r/o	PHY Address Register */
+
+
+/*----------------------------------------------------------------------------*/
+
+/*
+ * PHY bit definitions
+ * Bits defined as PHY_X_..., PHY_B_..., PHY_L_... or PHY_N_... are
+ * Xmac/Broadcom/LevelOne/National-specific.
+ * All other are general.
+ */
+
+/*****  PHY_XMAC_CTRL	16 bit r/w	PHY Control Register *****/
+/*****  PHY_BCOM_CTRL	16 bit r/w	PHY Control Register *****/
+/*****  PHY_LONE_CTRL	16 bit r/w	PHY Control Register *****/
+#define PHY_CT_RESET	(1<<15)	/* Bit 15: (sc)	clear all PHY related regs */
+#define PHY_CT_LOOP		(1<<14)	/* Bit 14:	enable Loopback over PHY */
+#define PHY_CT_SPS_LSB	(1<<13) /* Bit 13: (BC,L1) Speed select, lower bit */
+#define PHY_CT_ANE		(1<<12)	/* Bit 12:	Auto-Negotiation Enabled */
+#define PHY_CT_PDOWN	(1<<11)	/* Bit 11: (BC,L1) Power Down Mode */
+#define PHY_CT_ISOL		(1<<10)	/* Bit 10: (BC,L1) Isolate Mode */
+#define PHY_CT_RE_CFG	(1<<9)	/* Bit  9: (sc) Restart Auto-Negotiation */
+#define PHY_CT_DUP_MD	(1<<8)	/* Bit  8:	Duplex Mode */
+#define PHY_CT_COL_TST	(1<<7)	/* Bit  7: (BC,L1) Collision Test enabled */
+#define PHY_CT_SPS_MSB	(1<<6)	/* Bit  6: (BC,L1) Speed select, upper bit */
+								/* Bit  5..0:	reserved */
+
+#define PHY_CT_SP1000	PHY_CT_SPS_MSB	/* enable speed of 1000 Mbps */
+#define PHY_CT_SP100	PHY_CT_SPS_LSB	/* enable speed of  100 Mbps */
+#define PHY_CT_SP10		(0)				/* enable speed of   10 Mbps */
+
+
+/*****  PHY_XMAC_STAT	16 bit r/w	PHY Status Register *****/
+/*****  PHY_BCOM_STAT	16 bit r/w	PHY Status Register *****/
+/*****  PHY_MARV_STAT	16 bit r/w	PHY Status Register *****/
+/*****  PHY_LONE_STAT	16 bit r/w	PHY Status Register *****/
+								/* Bit 15..9:	reserved */
+				/*	(BC/L1) 100/10 Mbps cap bits ignored*/
+#define PHY_ST_EXT_ST	(1<<8)	/* Bit  8:	Extended Status Present */
+								/* Bit  7:	reserved */
+#define PHY_ST_PRE_SUP	(1<<6)	/* Bit  6: (BC/L1) preamble suppression */
+#define PHY_ST_AN_OVER	(1<<5)	/* Bit  5:	Auto-Negotiation Over */
+#define PHY_ST_REM_FLT	(1<<4)	/* Bit  4:	Remote Fault Condition Occured */
+#define PHY_ST_AN_CAP	(1<<3)	/* Bit  3:	Auto-Negotiation Capability */
+#define PHY_ST_LSYNC	(1<<2)	/* Bit  2:	Link Synchronized */
+#define PHY_ST_JAB_DET	(1<<1)	/* Bit  1: (BC/L1) Jabber Detected */
+#define PHY_ST_EXT_REG	(1<<0)	/* Bit  0:	Extended Register available */
+
+
+/*****	PHY_XMAC_ID1		16 bit r/o	PHY ID1 Register */
+/*****	PHY_BCOM_ID1		16 bit r/o	PHY ID1 Register */
+/*****	PHY_MARV_ID1		16 bit r/o	PHY ID1 Register */
+/*****	PHY_LONE_ID1		16 bit r/o	PHY ID1 Register */
+#define PHY_I1_OUI_MSK	(0x3f<<10)	/* Bit 15..10:	Organization Unique ID */
+#define PHY_I1_MOD_NUM	(0x3f<<4)	/* Bit  9.. 4:	Model Number */
+#define PHY_I1_REV_MSK	0x0f		/* Bit  3.. 0:	Revision Number */
+
+/* different Broadcom PHY Ids */
+#define PHY_BCOM_ID1_A1		0x6041
+#define PHY_BCOM_ID1_B2		0x6043
+#define PHY_BCOM_ID1_C0		0x6044
+#define PHY_BCOM_ID1_C5		0x6047
+
+
+/*****  PHY_XMAC_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
+/*****  PHY_XMAC_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
+#define PHY_AN_NXT_PG	(1<<15)	/* Bit 15:	Request Next Page */
+#define PHY_X_AN_ACK	(1<<14)	/* Bit 14: (ro)	Acknowledge Received */
+#define PHY_X_AN_RFB	(3<<12)	/* Bit 13..12:	Remote Fault Bits */
+								/* Bit 11.. 9:	reserved */
+#define PHY_X_AN_PAUSE	(3<<7)	/* Bit  8.. 7:	Pause Bits */
+#define PHY_X_AN_HD		(1<<6)	/* Bit  6:	Half Duplex */
+#define PHY_X_AN_FD		(1<<5)	/* Bit  5:	Full Duplex */
+								/* Bit  4.. 0:	reserved */
+
+/*****  PHY_BCOM_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
+/*****  PHY_BCOM_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
+/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
+								/* Bit 14:	reserved */
+#define PHY_B_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
+								/* Bit 12:	reserved */
+#define PHY_B_AN_ASP	(1<<11)	/* Bit 11:	Asymmetric Pause */
+#define PHY_B_AN_PC		(1<<10)	/* Bit 10:	Pause Capable */
+								/* Bit  9..5:	100/10 BT cap bits ingnored */
+#define PHY_B_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/
+
+/*****  PHY_LONE_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
+/*****  PHY_LONE_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
+/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
+								/* Bit 14:	reserved */
+#define PHY_L_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
+								/* Bit 12:	reserved */
+#define PHY_L_AN_ASP	(1<<11)	/* Bit 11:	Asymmetric Pause */
+#define PHY_L_AN_PC		(1<<10)	/* Bit 10:	Pause Capable */
+								/* Bit  9..5:	100/10 BT cap bits ingnored */
+#define PHY_L_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/
+
+/*****  PHY_NAT_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
+/*****  PHY_NAT_AUNE_LP		16 bit r/o	Link Partner Ability Reg *****/
+/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
+								/* Bit 14:	reserved */
+#define PHY_N_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
+								/* Bit 12:	reserved */
+#define PHY_N_AN_100F	(1<<11)	/* Bit 11:	100Base-T2 FD Support */
+#define PHY_N_AN_100H	(1<<10)	/* Bit 10:	100Base-T2 HD Support */
+								/* Bit  9..5:	100/10 BT cap bits ingnored */
+#define PHY_N_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/
+
+/* field type definition for PHY_x_AN_SEL */
+#define PHY_SEL_TYPE	0x01	/* 00001 = Ethernet */
+
+/*****  PHY_XMAC_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
+								/* Bit 15..4:	reserved */
+#define PHY_AN_LP_NP	(1<<3)	/* Bit  3:	Link Partner can Next Page */
+#define PHY_AN_LOC_NP	(1<<2)	/* Bit  2:	Local PHY can Next Page */
+#define PHY_AN_RX_PG	(1<<1)	/* Bit  1:	Page Received */
+								/* Bit  0:	reserved */
+
+/*****  PHY_BCOM_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
+								/* Bit 15..5:	reserved */
+#define PHY_B_AN_PDF	(1<<4)	/* Bit  4:	Parallel Detection Fault */
+/*	PHY_AN_LP_NP		(see XMAC) Bit  3:	Link Partner can Next Page */
+/*	PHY_AN_LOC_NP		(see XMAC) Bit  2:	Local PHY can Next Page */
+/*	PHY_AN_RX_PG		(see XMAC) Bit  1:	Page Received */
+#define PHY_B_AN_LP_CAP	(1<<0)	/* Bit  0:	Link Partner Auto-Neg. Cap. */
+
+/*****  PHY_LONE_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
+#define PHY_L_AN_BP		(1<<5)	/* Bit  5:	Base Page Indication */
+#define PHY_L_AN_PDF	(1<<4)	/* Bit  4:	Parallel Detection Fault */
+/*	PHY_AN_LP_NP		(see XMAC) Bit  3:	Link Partner can Next Page */
+/*	PHY_AN_LOC_NP		(see XMAC) Bit  2:	Local PHY can Next Page */
+/*	PHY_AN_RX_PG		(see XMAC) Bit  1:	Page Received */
+#define PHY_B_AN_LP_CAP	(1<<0)	/* Bit  0:	Link Partner Auto-Neg. Cap. */
+
+
+/*****  PHY_XMAC_NEPG		16 bit r/w	Next Page Register *****/
+/*****  PHY_BCOM_NEPG		16 bit r/w	Next Page Register *****/
+/*****  PHY_LONE_NEPG		16 bit r/w	Next Page Register *****/
+/*****  PHY_XMAC_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
+/*****  PHY_BCOM_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
+/*****  PHY_LONE_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
+#define PHY_NP_MORE		(1<<15)	/* Bit 15:	More, Next Pages to follow */
+#define PHY_NP_ACK1		(1<<14)	/* Bit 14: (ro)	Ack 1, for receiving a message*/
+#define PHY_NP_MSG_VAL	(1<<13)	/* Bit 13:	Message Page valid */
+#define PHY_NP_ACK2		(1<<12)	/* Bit 12:	Ack 2, comply with msg content*/
+#define PHY_NP_TOG		(1<<11)	/* Bit 11:	Toggle Bit, ensure sync */
+#define PHY_NP_MSG		0x07ff	/* Bit 10..0:	Message from/to Link Partner */
+
+/*
+ * XMAC-Specific
+ */
+/*****  PHY_XMAC_EXT_STAT	16 bit r/w	Extended Status Register *****/
+#define PHY_X_EX_FD		(1<<15)	/* Bit 15:	Device Supports Full Duplex */
+#define PHY_X_EX_HD		(1<<14)	/* Bit 14:	Device Supports Half Duplex */
+								/* Bit 13..0:	reserved */
+
+/*****  PHY_XMAC_RES_ABI	16 bit r/o	PHY Resolved Ability *****/
+								/* Bit 15..9:	reserved */
+#define PHY_X_RS_PAUSE	(3<<7)	/* Bit  8..7:	selected Pause Mode */
+#define PHY_X_RS_HD		(1<<6)	/* Bit  6:	Half Duplex Mode selected */
+#define PHY_X_RS_FD		(1<<5)	/* Bit  5:	Full Duplex Mode selected */
+#define PHY_X_RS_ABLMIS (1<<4)	/* Bit  4:	duplex or pause cap mismatch */
+#define PHY_X_RS_PAUMIS (1<<3)	/* Bit  3:	pause capability missmatch */
+								/* Bit  2..0:	reserved */
+/*
+ * Remote Fault Bits (PHY_X_AN_RFB) encoding
+ */
+#define X_RFB_OK		(0<<12)	/* Bit 13..12	No errors, Link OK */
+#define X_RFB_LF		(1<<12)	/* Bit 13..12	Link Failure */
+#define X_RFB_OFF		(2<<12)	/* Bit 13..12	Offline */
+#define X_RFB_AN_ERR	(3<<12)	/* Bit 13..12	Auto-Negotiation Error */
+
+/*
+ * Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding
+ */
+#define PHY_X_P_NO_PAUSE	(0<<7)	/* Bit  8..7:	no Pause Mode */
+#define PHY_X_P_SYM_MD		(1<<7)	/* Bit  8..7:	symmetric Pause Mode */
+#define PHY_X_P_ASYM_MD		(2<<7)	/* Bit  8..7:	asymmetric Pause Mode */
+#define PHY_X_P_BOTH_MD		(3<<7)	/* Bit  8..7:	both Pause Mode */
+
+
+/*
+ * Broadcom-Specific
+ */
+/*****  PHY_BCOM_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
+#define PHY_B_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
+#define PHY_B_1000C_MSE		(1<<12)	/* Bit 12:	Master/Slave Enable */
+#define PHY_B_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration */
+#define PHY_B_1000C_RD		(1<<10)	/* Bit 10:	Repeater/DTE */
+#define PHY_B_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
+#define PHY_B_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
+									/* Bit  7..0:	reserved */
+
+/*****  PHY_BCOM_1000T_STAT	16 bit r/o	1000Base-T Status Reg *****/
+#define PHY_B_1000S_MSF		(1<<15)	/* Bit 15:	Master/Slave Fault */
+#define PHY_B_1000S_MSR		(1<<14)	/* Bit 14:	Master/Slave Result */
+#define PHY_B_1000S_LRS		(1<<13)	/* Bit 13:	Local Receiver Status */
+#define PHY_B_1000S_RRS		(1<<12)	/* Bit 12:	Remote Receiver Status */
+#define PHY_B_1000S_LP_FD	(1<<11)	/* Bit 11:	Link Partner can FD */
+#define PHY_B_1000S_LP_HD	(1<<10)	/* Bit 10:	Link Partner can HD */
+									/* Bit  9..8:	reserved */
+#define PHY_B_1000S_IEC		0xff	/* Bit  7..0:	Idle Error Count */
+
+/*****  PHY_BCOM_EXT_STAT	16 bit r/o	Extended Status Register *****/
+#define PHY_B_ES_X_FD_CAP	(1<<15)	/* Bit 15:	1000Base-X FD capable */
+#define PHY_B_ES_X_HD_CAP	(1<<14)	/* Bit 14:	1000Base-X HD capable */
+#define PHY_B_ES_T_FD_CAP	(1<<13)	/* Bit 13:	1000Base-T FD capable */
+#define PHY_B_ES_T_HD_CAP	(1<<12)	/* Bit 12:	1000Base-T HD capable */
+									/* Bit 11..0:	reserved */
+
+/*****  PHY_BCOM_P_EXT_CTRL	16 bit r/w	PHY Extended Control Reg *****/
+#define PHY_B_PEC_MAC_PHY	(1<<15)	/* Bit 15:	10BIT/GMI-Interface */
+#define PHY_B_PEC_DIS_CROSS	(1<<14)	/* Bit 14:	Disable MDI Crossover */
+#define PHY_B_PEC_TX_DIS	(1<<13)	/* Bit 13:	Tx output Disabled */
+#define PHY_B_PEC_INT_DIS	(1<<12)	/* Bit 12:	Interrupts Disabled */
+#define PHY_B_PEC_F_INT		(1<<11)	/* Bit 11:	Force Interrupt */
+#define PHY_B_PEC_BY_45		(1<<10)	/* Bit 10:	Bypass 4B5B-Decoder */
+#define PHY_B_PEC_BY_SCR	(1<<9)	/* Bit  9:	Bypass Scrambler */
+#define PHY_B_PEC_BY_MLT3	(1<<8)	/* Bit  8:	Bypass MLT3 Encoder */
+#define PHY_B_PEC_BY_RXA	(1<<7)	/* Bit  7:	Bypass Rx Alignm. */
+#define PHY_B_PEC_RES_SCR	(1<<6)	/* Bit  6:	Reset Scrambler */
+#define PHY_B_PEC_EN_LTR	(1<<5)	/* Bit  5:	Ena LED Traffic Mode */
+#define PHY_B_PEC_LED_ON	(1<<4)	/* Bit  4:	Force LED's on */
+#define PHY_B_PEC_LED_OFF	(1<<3)	/* Bit  3:	Force LED's off */
+#define PHY_B_PEC_EX_IPG	(1<<2)	/* Bit  2:	Extend Tx IPG Mode */
+#define PHY_B_PEC_3_LED		(1<<1)	/* Bit  1:	Three Link LED mode */
+#define PHY_B_PEC_HIGH_LA	(1<<0)	/* Bit  0:	GMII FIFO Elasticy */
+
+/*****  PHY_BCOM_P_EXT_STAT	16 bit r/o	PHY Extended Status Reg *****/
+									/* Bit 15..14:	reserved */
+#define PHY_B_PES_CROSS_STAT	(1<<13)	/* Bit 13:	MDI Crossover Status */
+#define PHY_B_PES_INT_STAT	(1<<12)	/* Bit 12:	Interrupt Status */
+#define PHY_B_PES_RRS		(1<<11)	/* Bit 11:	Remote Receiver Stat. */
+#define PHY_B_PES_LRS		(1<<10)	/* Bit 10:	Local Receiver Stat. */
+#define PHY_B_PES_LOCKED	(1<<9)	/* Bit  9:	Locked */
+#define PHY_B_PES_LS		(1<<8)	/* Bit  8:	Link Status */
+#define PHY_B_PES_RF		(1<<7)	/* Bit  7:	Remote Fault */
+#define PHY_B_PES_CE_ER		(1<<6)	/* Bit  6:	Carrier Ext Error */
+#define PHY_B_PES_BAD_SSD	(1<<5)	/* Bit  5:	Bad SSD */
+#define PHY_B_PES_BAD_ESD	(1<<4)	/* Bit  4:	Bad ESD */
+#define PHY_B_PES_RX_ER		(1<<3)	/* Bit  3:	Receive Error */
+#define PHY_B_PES_TX_ER		(1<<2)	/* Bit  2:	Transmit Error */
+#define PHY_B_PES_LOCK_ER	(1<<1)	/* Bit  1:	Lock Error */
+#define PHY_B_PES_MLT3_ER	(1<<0)	/* Bit  0:	MLT3 code Error */
+
+/*****  PHY_BCOM_FC_CTR		16 bit r/w	False Carrier Counter *****/
+									/* Bit 15..8:	reserved */
+#define PHY_B_FC_CTR		0xff	/* Bit  7..0:	False Carrier Counter */
+
+/*****  PHY_BCOM_RNO_CTR	16 bit r/w	Receive NOT_OK Counter *****/
+#define PHY_B_RC_LOC_MSK	0xff00	/* Bit 15..8:	Local Rx NOT_OK cnt */
+#define PHY_B_RC_REM_MSK	0x00ff	/* Bit  7..0:	Remote Rx NOT_OK cnt */
+
+/*****  PHY_BCOM_AUX_CTRL	16 bit r/w	Auxiliary Control Reg *****/
+#define PHY_B_AC_L_SQE		(1<<15)	/* Bit 15:	Low Squelch */
+#define PHY_B_AC_LONG_PACK	(1<<14)	/* Bit 14:	Rx Long Packets */
+#define PHY_B_AC_ER_CTRL	(3<<12)	/* Bit 13..12:	Edgerate Control */
+									/* Bit 11:	reserved */
+#define PHY_B_AC_TX_TST		(1<<10) /* Bit 10:	Tx test bit, always 1 */
+									/* Bit  9.. 8:	reserved */
+#define PHY_B_AC_DIS_PRF	(1<<7)	/* Bit  7:	dis part resp filter */
+									/* Bit  6:	reserved */
+#define PHY_B_AC_DIS_PM		(1<<5)	/* Bit  5:	dis power management */
+									/* Bit  4:	reserved */
+#define PHY_B_AC_DIAG		(1<<3)	/* Bit  3:	Diagnostic Mode */
+									/* Bit  2.. 0:	reserved */
+
+/*****  PHY_BCOM_AUX_STAT	16 bit r/o	Auxiliary Status Reg *****/
+#define PHY_B_AS_AN_C		(1<<15)	/* Bit 15:	AutoNeg complete */
+#define PHY_B_AS_AN_CA		(1<<14)	/* Bit 14:	AN Complete Ack */
+#define PHY_B_AS_ANACK_D	(1<<13)	/* Bit 13:	AN Ack Detect */
+#define PHY_B_AS_ANAB_D		(1<<12)	/* Bit 12:	AN Ability Detect */
+#define PHY_B_AS_NPW		(1<<11)	/* Bit 11:	AN Next Page Wait */
+#define PHY_B_AS_AN_RES_MSK	(7<<8)	/* Bit 10..8:	AN HDC */
+#define PHY_B_AS_PDF		(1<<7)	/* Bit  7:	Parallel Detect. Fault */
+#define PHY_B_AS_RF			(1<<6)	/* Bit  6:	Remote Fault */
+#define PHY_B_AS_ANP_R		(1<<5)	/* Bit  5:	AN Page Received */
+#define PHY_B_AS_LP_ANAB	(1<<4)	/* Bit  4:	LP AN Ability */
+#define PHY_B_AS_LP_NPAB	(1<<3)	/* Bit  3:	LP Next Page Ability */
+#define PHY_B_AS_LS			(1<<2)	/* Bit  2:	Link Status */
+#define PHY_B_AS_PRR		(1<<1)	/* Bit  1:	Pause Resolution-Rx */
+#define PHY_B_AS_PRT		(1<<0)	/* Bit  0:	Pause Resolution-Tx */
+
+#define PHY_B_AS_PAUSE_MSK	(PHY_B_AS_PRR | PHY_B_AS_PRT)
+
+/*****  PHY_BCOM_INT_STAT	16 bit r/o	Interrupt Status Reg *****/
+/*****  PHY_BCOM_INT_MASK	16 bit r/w	Interrupt Mask Reg *****/
+									/* Bit 15:	reserved */
+#define PHY_B_IS_PSE		(1<<14)	/* Bit 14:	Pair Swap Error */
+#define PHY_B_IS_MDXI_SC	(1<<13)	/* Bit 13:	MDIX Status Change */
+#define PHY_B_IS_HCT		(1<<12)	/* Bit 12:	counter above 32k */
+#define PHY_B_IS_LCT		(1<<11)	/* Bit 11:	counter above 128 */
+#define PHY_B_IS_AN_PR		(1<<10)	/* Bit 10:	Page Received */
+#define PHY_B_IS_NO_HDCL	(1<<9)	/* Bit  9:	No HCD Link */
+#define PHY_B_IS_NO_HDC		(1<<8)	/* Bit  8:	No HCD */
+#define PHY_B_IS_NEG_USHDC	(1<<7)	/* Bit  7:	Negotiated Unsup. HCD */
+#define PHY_B_IS_SCR_S_ER	(1<<6)	/* Bit  6:	Scrambler Sync Error */
+#define PHY_B_IS_RRS_CHANGE	(1<<5)	/* Bit  5:	Remote Rx Stat Change */
+#define PHY_B_IS_LRS_CHANGE	(1<<4)	/* Bit  4:	Local Rx Stat Change */
+#define PHY_B_IS_DUP_CHANGE	(1<<3)	/* Bit  3:	Duplex Mode Change */
+#define PHY_B_IS_LSP_CHANGE	(1<<2)	/* Bit  2:	Link Speed Change */
+#define PHY_B_IS_LST_CHANGE	(1<<1)	/* Bit  1:	Link Status Changed */
+#define PHY_B_IS_CRC_ER		(1<<0)	/* Bit  0:	CRC Error */
+
+#define PHY_B_DEF_MSK	(~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE))
+
+/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */
+#define PHY_B_P_NO_PAUSE	(0<<10)	/* Bit 11..10:	no Pause Mode */
+#define PHY_B_P_SYM_MD		(1<<10)	/* Bit 11..10:	symmetric Pause Mode */
+#define PHY_B_P_ASYM_MD		(2<<10)	/* Bit 11..10:	asymmetric Pause Mode */
+#define PHY_B_P_BOTH_MD		(3<<10)	/* Bit 11..10:	both Pause Mode */
+
+/*
+ * Resolved Duplex mode and Capabilities (Aux Status Summary Reg)
+ */
+#define PHY_B_RES_1000FD	(7<<8)	/* Bit 10..8:	1000Base-T Full Dup. */
+#define PHY_B_RES_1000HD	(6<<8)	/* Bit 10..8:	1000Base-T Half Dup. */
+/* others: 100/10: invalid for us */
+
+/*
+ * Level One-Specific
+ */
+/*****  PHY_LONE_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
+#define PHY_L_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
+#define PHY_L_1000C_MSE		(1<<12)	/* Bit 12:	Master/Slave Enable */
+#define PHY_L_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration */
+#define PHY_L_1000C_RD		(1<<10)	/* Bit 10:	Repeater/DTE */
+#define PHY_L_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
+#define PHY_L_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
+									/* Bit  7..0:	reserved */
+
+/*****  PHY_LONE_1000T_STAT	16 bit r/o	1000Base-T Status Reg *****/
+#define PHY_L_1000S_MSF		(1<<15)	/* Bit 15:	Master/Slave Fault */
+#define PHY_L_1000S_MSR		(1<<14)	/* Bit 14:	Master/Slave Result */
+#define PHY_L_1000S_LRS		(1<<13)	/* Bit 13:	Local Receiver Status */
+#define PHY_L_1000S_RRS		(1<<12)	/* Bit 12:	Remote Receiver Status*/
+#define PHY_L_1000S_LP_FD	(1<<11)	/* Bit 11:	Link Partner can FD */
+#define PHY_L_1000S_LP_HD	(1<<10)	/* Bit 10:	Link Partner can HD */
+									/* Bit  9..8:	reserved */
+#define PHY_B_1000S_IEC		0xff	/* Bit  7..0:	Idle Error Count */
+
+/*****  PHY_LONE_EXT_STAT	16 bit r/o	Extended Status Register *****/
+#define PHY_L_ES_X_FD_CAP	(1<<15)	/* Bit 15:	1000Base-X FD capable */
+#define PHY_L_ES_X_HD_CAP	(1<<14)	/* Bit 14:	1000Base-X HD capable */
+#define PHY_L_ES_T_FD_CAP	(1<<13)	/* Bit 13:	1000Base-T FD capable */
+#define PHY_L_ES_T_HD_CAP	(1<<12)	/* Bit 12:	1000Base-T HD capable */
+									/* Bit 11..0:	reserved */
+
+/*****  PHY_LONE_PORT_CFG	16 bit r/w	Port Configuration Reg *****/
+#define PHY_L_PC_REP_MODE	(1<<15)	/* Bit 15:	Repeater Mode */
+									/* Bit 14:	reserved */
+#define PHY_L_PC_TX_DIS		(1<<13)	/* Bit 13:	Tx output Disabled */
+#define PHY_L_PC_BY_SCR		(1<<12)	/* Bit 12:	Bypass Scrambler */
+#define PHY_L_PC_BY_45		(1<<11)	/* Bit 11:	Bypass 4B5B-Decoder */
+#define PHY_L_PC_JAB_DIS	(1<<10)	/* Bit 10:	Jabber Disabled */
+#define PHY_L_PC_SQE		(1<<9)	/* Bit  9:	Enable Heartbeat */
+#define PHY_L_PC_TP_LOOP	(1<<8)	/* Bit  8:	TP Loopback */
+#define PHY_L_PC_SSS		(1<<7)	/* Bit  7:	Smart Speed Selection */
+#define PHY_L_PC_FIFO_SIZE	(1<<6)	/* Bit  6:	FIFO Size */
+#define PHY_L_PC_PRE_EN		(1<<5)	/* Bit  5:	Preamble Enable */
+#define PHY_L_PC_CIM		(1<<4)	/* Bit  4:	Carrier Integrity Mon */
+#define PHY_L_PC_10_SER		(1<<3)	/* Bit  3:	Use Serial Output */
+#define PHY_L_PC_ANISOL		(1<<2)	/* Bit  2:	Unisolate Port */
+#define PHY_L_PC_TEN_BIT	(1<<1)	/* Bit  1:	10bit iface mode on */
+#define PHY_L_PC_ALTCLOCK	(1<<0)	/* Bit  0: (ro)	ALTCLOCK Mode on */
+
+/*****  PHY_LONE_Q_STAT		16 bit r/o	Quick Status Reg *****/
+#define PHY_L_QS_D_RATE		(3<<14)	/* Bit 15..14:	Data Rate */
+#define PHY_L_QS_TX_STAT	(1<<13)	/* Bit 13:	Transmitting */
+#define PHY_L_QS_RX_STAT	(1<<12)	/* Bit 12:	Receiving */
+#define PHY_L_QS_COL_STAT	(1<<11)	/* Bit 11:	Collision */
+#define PHY_L_QS_L_STAT		(1<<10)	/* Bit 10:	Link is up */
+#define PHY_L_QS_DUP_MOD	(1<<9)	/* Bit  9:	Full/Half Duplex */
+#define PHY_L_QS_AN			(1<<8)	/* Bit  8:	AutoNeg is On */
+#define PHY_L_QS_AN_C		(1<<7)	/* Bit  7:	AN is Complete */
+#define PHY_L_QS_LLE		(7<<4)	/* Bit  6:	Line Length Estim. */
+#define PHY_L_QS_PAUSE		(1<<3)	/* Bit  3:	LP advertised Pause */
+#define PHY_L_QS_AS_PAUSE	(1<<2)	/* Bit  2:	LP adv. asym. Pause */
+#define PHY_L_QS_ISOLATE	(1<<1)	/* Bit  1:	CIM Isolated */
+#define PHY_L_QS_EVENT		(1<<0)	/* Bit  0:	Event has occurred */
+
+/*****  PHY_LONE_INT_ENAB	16 bit r/w	Interrupt Enable Reg *****/
+/*****  PHY_LONE_INT_STAT	16 bit r/o	Interrupt Status Reg *****/
+									/* Bit 15..14:	reserved */
+#define PHY_L_IS_AN_F		(1<<13)	/* Bit 13:	Auto-Negotiation fault */
+									/* Bit 12:	not described */
+#define PHY_L_IS_CROSS		(1<<11)	/* Bit 11:	Crossover used */
+#define PHY_L_IS_POL		(1<<10)	/* Bit 10:	Polarity correct. used*/
+#define PHY_L_IS_SS			(1<<9)	/* Bit  9:	Smart Speed Downgrade*/
+#define PHY_L_IS_CFULL		(1<<8)	/* Bit  8:	Counter Full */
+#define PHY_L_IS_AN_C		(1<<7)	/* Bit  7:	AutoNeg Complete */
+#define PHY_L_IS_SPEED		(1<<6)	/* Bit  6:	Speed Changed */
+#define PHY_L_IS_DUP		(1<<5)	/* Bit  5:	Duplex Changed */
+#define PHY_L_IS_LS			(1<<4)	/* Bit  4:	Link Status Changed */
+#define PHY_L_IS_ISOL		(1<<3)	/* Bit  3:	Isolate Occured */
+#define PHY_L_IS_MDINT		(1<<2)	/* Bit  2: (ro)	STAT: MII Int Pending */
+#define PHY_L_IS_INTEN		(1<<1)	/* Bit  1:	ENAB: Enable IRQs */
+#define PHY_L_IS_FORCE		(1<<0)	/* Bit  0:	ENAB: Force Interrupt */
+
+/* int. mask */
+#define PHY_L_DEF_MSK		(PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN)
+
+/*****  PHY_LONE_LED_CFG	16 bit r/w	LED Configuration Reg *****/
+#define PHY_L_LC_LEDC		(3<<14)	/* Bit 15..14:	Col/Blink/On/Off */
+#define PHY_L_LC_LEDR		(3<<12)	/* Bit 13..12:	Rx/Blink/On/Off */
+#define PHY_L_LC_LEDT		(3<<10)	/* Bit 11..10:	Tx/Blink/On/Off */
+#define PHY_L_LC_LEDG		(3<<8)	/* Bit  9..8:	Giga/Blink/On/Off */
+#define PHY_L_LC_LEDS		(3<<6)	/* Bit  7..6:	10-100/Blink/On/Off */
+#define PHY_L_LC_LEDL		(3<<4)	/* Bit  5..4:	Link/Blink/On/Off */
+#define PHY_L_LC_LEDF		(3<<2)	/* Bit  3..2:	Duplex/Blink/On/Off */
+#define PHY_L_LC_PSTRECH	(1<<1)	/* Bit  1:	Strech LED Pulses */
+#define PHY_L_LC_FREQ		(1<<0)	/* Bit  0:	30/100 ms */
+
+/*****  PHY_LONE_PORT_CTRL	16 bit r/w	Port Control Reg *****/
+#define PHY_L_PC_TX_TCLK	(1<<15)	/* Bit 15:	Enable TX_TCLK */
+									/* Bit 14:	reserved */
+#define PHY_L_PC_ALT_NP		(1<<13)	/* Bit 14:	Alternate Next Page */
+#define PHY_L_PC_GMII_ALT	(1<<12)	/* Bit 13:	Alternate GMII driver */
+									/* Bit 11:	reserved */
+#define PHY_L_PC_TEN_CRS	(1<<10)	/* Bit 10:	Extend CRS*/
+									/* Bit  9..0:	not described */
+
+/*****  PHY_LONE_CIM		16 bit r/o	CIM Reg *****/
+#define PHY_L_CIM_ISOL		(255<<8)/* Bit 15..8:	Isolate Count */
+#define PHY_L_CIM_FALSE_CAR	(255<<0)/* Bit  7..0:	False Carrier Count */
+
+
+/*
+ * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding
+ */
+#define PHY_L_P_NO_PAUSE	(0<<10)	/* Bit 11..10:	no Pause Mode */
+#define PHY_L_P_SYM_MD		(1<<10)	/* Bit 11..10:	symmetric Pause Mode */
+#define PHY_L_P_ASYM_MD		(2<<10)	/* Bit 11..10:	asymmetric Pause Mode */
+#define PHY_L_P_BOTH_MD		(3<<10)	/* Bit 11..10:	both Pause Mode */
+
+
+/*
+ * National-Specific
+ */
+/*****  PHY_NAT_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
+#define PHY_N_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
+#define PHY_N_1000C_MSE		(1<<12)	/* Bit 12:	Master/Slave Enable */
+#define PHY_N_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration */
+#define PHY_N_1000C_RD		(1<<10)	/* Bit 10:	Repeater/DTE */
+#define PHY_N_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
+#define PHY_N_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
+#define PHY_N_1000C_APC		(1<<7)	/* Bit  7:	Asymmetric Pause Cap. */
+									/* Bit  6..0:	reserved */
+
+/*****  PHY_NAT_1000T_STAT	16 bit r/o	1000Base-T Status Reg *****/
+#define PHY_N_1000S_MSF		(1<<15)	/* Bit 15:	Master/Slave Fault */
+#define PHY_N_1000S_MSR		(1<<14)	/* Bit 14:	Master/Slave Result */
+#define PHY_N_1000S_LRS		(1<<13)	/* Bit 13:	Local Receiver Status */
+#define PHY_N_1000S_RRS		(1<<12)	/* Bit 12:	Remote Receiver Status*/
+#define PHY_N_1000S_LP_FD	(1<<11)	/* Bit 11:	Link Partner can FD */
+#define PHY_N_1000S_LP_HD	(1<<10)	/* Bit 10:	Link Partner can HD */
+#define PHY_N_1000C_LP_APC	(1<<9)	/* Bit  9:	LP Asym. Pause Cap. */
+									/* Bit  8:	reserved */
+#define PHY_N_1000S_IEC		0xff	/* Bit  7..0:	Idle Error Count */
+
+/*****  PHY_NAT_EXT_STAT	16 bit r/o	Extended Status Register *****/
+#define PHY_N_ES_X_FD_CAP	(1<<15)	/* Bit 15:	1000Base-X FD capable */
+#define PHY_N_ES_X_HD_CAP	(1<<14)	/* Bit 14:	1000Base-X HD capable */
+#define PHY_N_ES_T_FD_CAP	(1<<13)	/* Bit 13:	1000Base-T FD capable */
+#define PHY_N_ES_T_HD_CAP	(1<<12)	/* Bit 12:	1000Base-T HD capable */
+									/* Bit 11..0:	reserved */
+
+/* todo: those are still missing */
+/*****  PHY_NAT_EXT_CTRL1	16 bit r/o	Extended Control Reg1 *****/
+/*****  PHY_NAT_Q_STAT1		16 bit r/o	Quick Status Reg1 *****/
+/*****  PHY_NAT_10B_OP		16 bit r/o	10Base-T Operations Reg *****/
+/*****  PHY_NAT_EXT_CTRL2	16 bit r/o	Extended Control Reg1 *****/
+/*****  PHY_NAT_Q_STAT2		16 bit r/o	Quick Status Reg2 *****/
+/*****  PHY_NAT_PHY_ADDR	16 bit r/o	PHY Address Register *****/
+
+/*
+ * Marvell-Specific
+ */
+/*****  PHY_MARV_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
+/*****  PHY_MARV_AUNE_LP	16 bit r/w	Link Part Ability Reg *****/
+#define PHY_M_AN_NXT_PG		BIT_15	/* Request Next Page */
+#define PHY_M_AN_ACK		BIT_14	/* (ro)	Acknowledge Received */
+#define PHY_M_AN_RF			BIT_13	/* Remote Fault */
+									/* Bit 12:	reserved */
+#define PHY_M_AN_ASP		BIT_11	/* Asymmetric Pause */
+#define PHY_M_AN_PC			BIT_10	/* MAC Pause implemented */
+#define PHY_M_AN_100_FD		BIT_8	/* Advertise 100Base-TX Full Duplex */
+#define PHY_M_AN_100_HD		BIT_7	/* Advertise 100Base-TX Half Duplex */
+#define PHY_M_AN_10_FD		BIT_6	/* Advertise 10Base-TX Full Duplex */
+#define PHY_M_AN_10_HD		BIT_5	/* Advertise 10Base-TX Half Duplex */
+
+/* special defines for FIBER (88E1011S only) */
+#define PHY_M_AN_ASP_X		BIT_8	/* Asymmetric Pause */
+#define PHY_M_AN_PC_X		BIT_7	/* MAC Pause implemented */
+#define PHY_M_AN_1000X_AHD	BIT_6	/* Advertise 10000Base-X Half Duplex */
+#define PHY_M_AN_1000X_AFD	BIT_5	/* Advertise 10000Base-X Full Duplex */
+
+/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */
+#define PHY_M_P_NO_PAUSE_X	(0<<7)	/* Bit  8.. 7:	no Pause Mode */
+#define PHY_M_P_SYM_MD_X	(1<<7)	/* Bit  8.. 7:	symmetric Pause Mode */
+#define PHY_M_P_ASYM_MD_X	(2<<7)	/* Bit  8.. 7:	asymmetric Pause Mode */
+#define PHY_M_P_BOTH_MD_X	(3<<7)	/* Bit  8.. 7:	both Pause Mode */
+
+/*****  PHY_MARV_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
+#define PHY_M_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
+#define PHY_M_1000C_MSE		(1<<12)	/* Bit 12:	Manual Master/Slave Enable */
+#define PHY_M_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration (1=Master) */
+#define PHY_M_1000C_MPD		(1<<10)	/* Bit 10:	Multi-Port Device */
+#define PHY_M_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
+#define PHY_M_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
+									/* Bit  7..0:	reserved */
+
+/*****  PHY_MARV_PHY_CTRL	16 bit r/w	PHY Specific Ctrl Reg *****/
+
+#define PHY_M_PC_TX_FFD_MSK	(3<<14)	/* Bit 15..14:	Tx FIFO Depth Mask */
+#define PHY_M_PC_RX_FFD_MSK	(3<<12)	/* Bit 13..12:	Rx FIFO Depth Mask */
+#define PHY_M_PC_ASS_CRS_TX	(1<<11)	/* Bit 11:	Assert CRS on Transmit */
+#define PHY_M_PC_FL_GOOD	(1<<10)	/* Bit 10:	Force Link Good */
+#define PHY_M_PC_EN_DET_MSK	(3<<8)	/* Bit  9.. 8:	Energy Detect Mask */
+#define PHY_M_PC_ENA_EXT_D	(1<<7)	/* Bit  7:	Enable Ext. Distance (10BT) */
+#define PHY_M_PC_MDIX_MSK	(3<<5)	/* Bit  6.. 5:	MDI/MDIX Config. Mask */
+#define PHY_M_PC_DIS_125CLK	(1<<4)	/* Bit  4:	Disable 125 CLK */
+#define PHY_M_PC_MAC_POW_UP	(1<<3)	/* Bit  3:	MAC Power up */
+#define PHY_M_PC_SQE_T_ENA	(1<<2)	/* Bit  2:	SQE Test Enabled */
+#define PHY_M_PC_POL_R_DIS	(1<<1)	/* Bit  1:	Polarity Reversal Disabled */
+#define PHY_M_PC_DIS_JABBER	(1<<0)	/* Bit  0:	Disable Jabber */
+
+#define PHY_M_PC_MDI_XMODE(x)	SHIFT5(x)
+#define PHY_M_PC_MAN_MDI	0    	/* 00 = Manual MDI configuration */
+#define PHY_M_PC_MAN_MDIX	1		/* 01 = Manual MDIX configuration */
+#define PHY_M_PC_ENA_AUTO	3		/* 11 = Enable Automatic Crossover */
+
+/*****  PHY_MARV_PHY_STAT	16 bit r/o	PHY Specific Status Reg *****/
+#define PHY_M_PS_SPEED_MSK	(3<<14)	/* Bit 15..14:	Speed Mask */
+#define PHY_M_PS_SPEED_1000	(1<<15)	/*       10 = 1000 Mbps */
+#define PHY_M_PS_SPEED_100	(1<<14)	/*       01 =  100 Mbps */
+#define PHY_M_PS_SPEED_10	0		/*       00 =   10 Mbps */
+#define PHY_M_PS_FULL_DUP	(1<<13)	/* Bit 13:	Full Duplex */
+#define PHY_M_PS_PAGE_REC	(1<<12)	/* Bit 12:	Page Received */
+#define PHY_M_PS_SPDUP_RES	(1<<11)	/* Bit 11:	Speed & Duplex Resolved */
+#define PHY_M_PS_LINK_UP	(1<<10)	/* Bit 10:	Link Up */
+#define PHY_M_PS_CABLE_MSK	(3<<7)	/* Bit  9.. 7:	Cable Length Mask */
+#define PHY_M_PS_MDI_X_STAT	(1<<6)	/* Bit  6:	MDI Crossover Stat (1=MDIX) */
+#define PHY_M_PS_DOWNS_STAT	(1<<5)	/* Bit  5:	Downshift Status (1=downsh.) */
+#define PHY_M_PS_ENDET_STAT	(1<<4)	/* Bit  4:	Energy Detect Status (1=act) */
+#define PHY_M_PS_TX_P_EN	(1<<3)	/* Bit  3:	Tx Pause Enabled */
+#define PHY_M_PS_RX_P_EN	(1<<2)	/* Bit  2:	Rx Pause Enabled */
+#define PHY_M_PS_POL_REV	(1<<1)	/* Bit  1:	Polarity Reversed */
+#define PHY_M_PC_JABBER		(1<<0)	/* Bit  0:	Jabber */
+
+#define PHY_M_PS_PAUSE_MSK	(PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN)
+
+/*****  PHY_MARV_INT_MASK	16 bit r/w	Interrupt Mask Reg *****/
+/*****  PHY_MARV_INT_STAT	16 bit r/o	Interrupt Status Reg *****/
+#define PHY_M_IS_AN_ERROR	(1<<15)	/* Bit 15:	Auto-Negotiation Error */
+#define PHY_M_IS_LSP_CHANGE	(1<<14)	/* Bit 14:	Link Speed Changed */
+#define PHY_M_IS_DUP_CHANGE	(1<<13)	/* Bit 13:	Duplex Mode Changed */
+#define PHY_M_IS_AN_PR		(1<<12)	/* Bit 12:	Page Received */
+#define PHY_M_IS_AN_COMPL	(1<<11)	/* Bit 11:	Auto-Negotiation Completed */
+#define PHY_M_IS_LST_CHANGE	(1<<10)	/* Bit 10:	Link Status Changed */
+#define PHY_M_IS_SYMB_ERROR	(1<<9)	/* Bit  9:	Symbol Error */
+#define PHY_M_IS_FALSE_CARR	(1<<8)	/* Bit  8:	False Carrier */
+#define PHY_M_IS_FIFO_ERROR	(1<<7)	/* Bit  7:	FIFO Overflow/Underrun Error */
+#define PHY_M_IS_MDI_CHANGE	(1<<6)	/* Bit  6:	MDI Crossover Changed */
+#define PHY_M_IS_DOWNSH_DET	(1<<5)	/* Bit  5:	Downshift Detected */
+#define PHY_M_IS_END_CHANGE	(1<<4)	/* Bit  4:	Energy Detect Changed */
+									/* Bit  3..2:	reserved */
+#define PHY_M_IS_POL_CHANGE	(1<<1)	/* Bit  1:	Polarity Changed */
+#define PHY_M_IS_JABBER		(1<<0)	/* Bit  0:	Jabber */
+
+#define PHY_M_DEF_MSK		(PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | \
+							PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)
+
+/*****  PHY_MARV_EXT_CTRL	16 bit r/w	Ext. PHY Specific Ctrl *****/
+#define PHY_M_EC_M_DSC_MSK	(3<<10)	/* Bit 11..10:	Master downshift counter */
+#define PHY_M_EC_S_DSC_MSK	(3<<8)	/* Bit  9.. 8:	Slave  downshift counter */
+#define PHY_M_EC_MAC_S_MSK	(7<<4)	/* Bit  6.. 4:	Def. MAC interface speed */
+
+#define PHY_M_EC_M_DSC(x)		SHIFT10(x)	/* 00=1x; 01=2x; 10=3x; 11=4x */
+#define PHY_M_EC_S_DSC(x)		SHIFT8(x)	/* 00=dis; 01=1x; 10=2x; 11=3x */
+#define PHY_M_EC_MAC_S(x)		SHIFT4(x)	/* 01X=0; 110=2.5; 111=25 (MHz) */
+
+#define MAC_TX_CLK_0_MHZ	2
+#define MAC_TX_CLK_2_5_MHZ	6
+#define MAC_TX_CLK_25_MHZ	7
+
+/*****  PHY_MARV_LED_CTRL	16 bit r/w	LED Control Reg *****/
+#define PHY_M_LEDC_DIS_LED	(1<<15)	/* Bit 15:	Disable LED */
+#define PHY_M_LEDC_PULS_MSK	(7<<12)	/* Bit 14..12:  Pulse Stretch Mask */
+#define PHY_M_LEDC_F_INT	(1<<11)	/* Bit 11:	Force Interrupt */
+#define PHY_M_LEDC_BL_R_MSK	(7<<8)	/* Bit 10.. 8:  Blink Rate Mask */
+									/* Bit  7.. 5:	reserved */
+#define PHY_M_LEDC_LINK_MSK	(3<<3)	/* Bit  4.. 3:	Link Control Mask */
+#define PHY_M_LEDC_DP_CTRL	(1<<2)	/* Bit  2:	Duplex Control */
+#define PHY_M_LEDC_RX_CTRL	(1<<1)	/* Bit  1:	Rx activity / Link */
+#define PHY_M_LEDC_TX_CTRL	(1<<0)	/* Bit  0:	Tx activity / Link */
+
+#define PHY_M_LED_PULS_DUR(x)	SHIFT12(x)	/* Pulse Stretch Duration */
+
+#define	PULS_NO_STR		0		/* no pulse stretching */
+#define	PULS_21MS		1		/* 21 ms to 42 ms */
+#define PULS_42MS		2		/* 42 ms to 84 ms */
+#define PULS_84MS		3		/* 84 ms to 170 ms */
+#define PULS_170MS		4		/* 170 ms to 340 ms */
+#define PULS_340MS		5		/* 340 ms to 670 ms */
+#define PULS_670MS		6		/* 670 ms to 1.3 s */
+#define PULS_1300MS		7		/* 1.3 s to 2.7 s */
+
+#define PHY_M_LED_BLINK_RT(x)	SHIFT8(x)	/* Blink Rate */
+
+#define BLINK_42MS		0		/* 42 ms */
+#define BLINK_84MS		1		/* 84 ms */
+#define BLINK_170MS		2		/* 170 ms */
+#define BLINK_340MS		3		/* 340 ms */
+#define BLINK_670MS		4		/* 670 ms */
+								/* values 5 - 7: reserved */
+
+/*****  PHY_MARV_LED_OVER	16 bit r/w	Manual LED Override Reg *****/
+#define PHY_M_LED_MO_DUP(x)		SHIFT10(x)	/* Bit 11..10:  Duplex */
+#define PHY_M_LED_MO_10(x)		SHIFT8(x)	/* Bit  9.. 8:  Link 10 */
+#define PHY_M_LED_MO_100(x)		SHIFT6(x)	/* Bit  7.. 6:  Link 100 */
+#define PHY_M_LED_MO_1000(x)	SHIFT4(x)	/* Bit  5.. 4:  Link 1000 */
+#define PHY_M_LED_MO_RX(x)		SHIFT2(x)	/* Bit  3.. 2:  Rx */
+#define PHY_M_LED_MO_TX(x)		SHIFT0(x)	/* Bit  1.. 0:  Tx */
+
+#define MO_LED_NORM			0
+#define MO_LED_BLINK		1
+#define MO_LED_OFF			2
+#define MO_LED_ON			3
+
+/*****  PHY_MARV_EXT_CTRL_2	16 bit r/w	Ext. PHY Specific Ctrl 2 *****/
+									/* Bit 15.. 7:	reserved */
+#define PHY_M_EC2_FI_IMPED	(1<<6)	/* Bit  6:	Fiber Input  Impedance */
+#define PHY_M_EC2_FO_IMPED	(1<<5)	/* Bit  5:	Fiber Output Impedance */
+#define PHY_M_EC2_FO_M_CLK	(1<<4)	/* Bit  4:	Fiber Mode Clock Enable */
+#define PHY_M_EC2_FO_BOOST	(1<<3)	/* Bit  3:	Fiber Output Boost */
+#define PHY_M_EC2_FO_AM_MSK	7		/* Bit  2.. 0:	Fiber Output Amplitude */
+
+/*****  PHY_MARV_CABLE_DIAG	16 bit r/o	Cable Diagnostic Reg *****/
+#define PHY_M_CABD_ENA_TEST	(1<<15)	/* Bit 15:	Enable Test */
+#define PHY_M_CABD_STAT_MSK	(3<<13)	/* Bit 14..13:	Status */
+									/* Bit 12.. 8:	reserved */
+#define PHY_M_CABD_DIST_MSK	0xff	/* Bit  7.. 0:	Distance */
+
+/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */
+#define CABD_STAT_NORMAL	0
+#define CABD_STAT_SHORT		1
+#define CABD_STAT_OPEN		2
+#define CABD_STAT_FAIL		3
+
+
+/*
+ * GMAC registers
+ *
+ * The GMAC registers are 16 or 32 bits wide.
+ * The GMACs host processor interface is 16 bits wide,
+ * therefore ALL registers will be addressed with 16 bit accesses.
+ *
+ * The following macros are provided to access the GMAC registers
+ * GM_IN16(), GM_OUT16, GM_IN32(), GM_OUT32(), GM_INADR(), GM_OUTADR(),
+ * GM_INHASH(), and GM_OUTHASH().
+ * The macros are defined in SkGeHw.h.
+ *
+ * Note:	NA reg	= Network Address e.g DA, SA etc.
+ *
+ */
+
+/* Port Registers */
+#define GM_GP_STAT		0x0000		/* 16 bit r/o	General Purpose Status */
+#define GM_GP_CTRL		0x0004		/* 16 bit r/w	General Purpose Control */
+#define GM_TX_CTRL		0x0008		/* 16 bit r/w	Transmit Control Reg. */
+#define GM_RX_CTRL		0x000c		/* 16 bit r/w	Receive Control Reg. */
+#define GM_TX_FLOW_CTRL	0x0010		/* 16 bit r/w	Transmit Flow Control */
+#define GM_TX_PARAM		0x0014		/* 16 bit r/w	Transmit Parameter Reg. */
+#define GM_SERIAL_MODE	0x0018		/* 16 bit r/w	Serial Mode Register */
+
+/* Source Address Registers */
+#define GM_SRC_ADDR_1L	0x001c		/* 16 bit r/w	Source Address 1 (low) */
+#define GM_SRC_ADDR_1M	0x0020		/* 16 bit r/w	Source Address 1 (middle) */
+#define GM_SRC_ADDR_1H	0x0024		/* 16 bit r/w	Source Address 1 (high) */
+#define GM_SRC_ADDR_2L	0x0028		/* 16 bit r/w	Source Address 2 (low) */
+#define GM_SRC_ADDR_2M	0x002c		/* 16 bit r/w	Source Address 2 (middle) */
+#define GM_SRC_ADDR_2H	0x0030		/* 16 bit r/w	Source Address 2 (high) */
+
+/* Multicast Address Hash Registers */
+#define GM_MC_ADDR_H1	0x0034		/* 16 bit r/w	Multicast Address Hash 1 */
+#define GM_MC_ADDR_H2	0x0038		/* 16 bit r/w	Multicast Address Hash 2 */
+#define GM_MC_ADDR_H3	0x003c		/* 16 bit r/w	Multicast Address Hash 3 */
+#define GM_MC_ADDR_H4	0x0040		/* 16 bit r/w	Multicast Address Hash 4 */
+
+/* Interrupt Source Registers */
+#define GM_TX_IRQ_SRC	0x0044		/* 16 bit r/o	Tx Overflow IRQ Source */
+#define GM_RX_IRQ_SRC	0x0048		/* 16 bit r/o	Rx Overflow IRQ Source */
+#define GM_TR_IRQ_SRC	0x004c		/* 16 bit r/o	Tx/Rx Over. IRQ Source */
+
+/* Interrupt Mask Registers */
+#define GM_TX_IRQ_MSK	0x0050		/* 16 bit r/w	Tx Overflow IRQ Mask */
+#define GM_RX_IRQ_MSK	0x0054		/* 16 bit r/w	Rx Overflow IRQ Mask */
+#define GM_TR_IRQ_MSK	0x0058		/* 16 bit r/w	Tx/Rx Over. IRQ Mask */
+
+/* Serial Management Interface (SMI) Registers */
+#define GM_SMI_CTRL		0x0080		/* 16 bit r/w	SMI Control Register */
+#define GM_SMI_DATA		0x0084		/* 16 bit r/w	SMI Data Register */
+#define GM_PHY_ADDR		0x0088		/* 16 bit r/w	GPHY Address Register */
+
+/* MIB Counters */
+#define GM_MIB_CNT_BASE	0x0100		/* Base Address of MIB Counters */
+#define GM_MIB_CNT_SIZE	44			/* Number of MIB Counters */
+
+/*
+ * MIB Counters base address definitions (low word) -
+ * use offset 4 for access to high word	(32 bit r/o)
+ */
+#define GM_RXF_UC_OK \
+			(GM_MIB_CNT_BASE + 0)	/* Unicast Frames Received OK */
+#define GM_RXF_BC_OK \
+			(GM_MIB_CNT_BASE + 8)	/* Broadcast Frames Received OK */
+#define GM_RXF_MPAUSE \
+			(GM_MIB_CNT_BASE + 16)	/* Pause MAC Ctrl Frames Received */
+#define GM_RXF_MC_OK \
+			(GM_MIB_CNT_BASE + 24)	/* Multicast Frames Received OK */
+#define GM_RXF_FCS_ERR \
+			(GM_MIB_CNT_BASE + 32)	/* Rx Frame Check Seq. Error */
+	/* GM_MIB_CNT_BASE + 40:	reserved */
+#define GM_RXO_OK_LO \
+			(GM_MIB_CNT_BASE + 48)	/* Octets Received OK Low */
+#define GM_RXO_OK_HI \
+			(GM_MIB_CNT_BASE + 56)	/* Octets Received OK High */
+#define GM_RXO_ERR_LO \
+			(GM_MIB_CNT_BASE + 64)	/* Octets Received Invalid Low */
+#define GM_RXO_ERR_HI \
+			(GM_MIB_CNT_BASE + 72)	/* Octets Received Invalid High */
+#define GM_RXF_SHT \
+			(GM_MIB_CNT_BASE + 80)	/* Frames <64 Byte Received OK */
+#define GM_RXE_FRAG \
+			(GM_MIB_CNT_BASE + 88)	/* Frames <64 Byte Receeived with FCS Err */
+#define GM_RXF_64B \
+			(GM_MIB_CNT_BASE + 96)	/* 64 Byte Rx Frame */
+#define GM_RXF_127B \
+			(GM_MIB_CNT_BASE + 104)	/* 65-127 Byte Rx Frame */
+#define GM_RXF_255B \
+			(GM_MIB_CNT_BASE + 112)	/* 128-255 Byte Rx Frame */
+#define GM_RXF_511B \
+			(GM_MIB_CNT_BASE + 120)	/* 256-511 Byte Rx Frame */
+#define GM_RXF_1023B \
+			(GM_MIB_CNT_BASE + 128)	/* 512-1023 Byte Rx Frame */
+#define GM_RXF_1518B \
+			(GM_MIB_CNT_BASE + 136)	/* 1024-1518 Byte Rx Frame */
+#define GM_RXF_MAX_SZ \
+			(GM_MIB_CNT_BASE + 144)	/* 1519-MaxSize Byte Rx Frame */
+#define GM_RXF_LNG_ERR \
+			(GM_MIB_CNT_BASE + 152)	/* Rx Frame too Long Error */
+#define GM_RXF_JAB_PKT \
+			(GM_MIB_CNT_BASE + 160)	/* Rx Jabber Packet Frame */
+	/* GM_MIB_CNT_BASE + 168:	reserved */
+#define GM_RXE_FIFO_OV \
+			(GM_MIB_CNT_BASE + 176)	/* Rx FIFO overflow Event */
+	/* GM_MIB_CNT_BASE + 184:	reserved */
+#define GM_TXF_UC_OK \
+			(GM_MIB_CNT_BASE + 192)	/* Unicast Frames Xmitted OK */
+#define GM_TXF_BC_OK \
+			(GM_MIB_CNT_BASE + 200)	/* Broadcast Frames Xmitted OK */
+#define GM_TXF_MPAUSE \
+			(GM_MIB_CNT_BASE + 208)	/* Pause MAC Ctrl Frames Xmitted */
+#define GM_TXF_MC_OK \
+			(GM_MIB_CNT_BASE + 216)	/* Multicast Frames Xmitted OK */
+#define GM_TXO_OK_LO \
+			(GM_MIB_CNT_BASE + 224)	/* Octets Transmitted OK Low */
+#define GM_TXO_OK_HI \
+			(GM_MIB_CNT_BASE + 232)	/* Octets Transmitted OK High */
+#define GM_TXF_64B \
+			(GM_MIB_CNT_BASE + 240)	/* 64 Byte Tx Frame */
+#define GM_TXF_127B \
+			(GM_MIB_CNT_BASE + 248)	/* 65-127 Byte Tx Frame */
+#define GM_TXF_255B \
+			(GM_MIB_CNT_BASE + 256)	/* 128-255 Byte Tx Frame */
+#define GM_TXF_511B \
+			(GM_MIB_CNT_BASE + 264)	/* 256-511 Byte Tx Frame */
+#define GM_TXF_1023B \
+			(GM_MIB_CNT_BASE + 272)	/* 512-1023 Byte Tx Frame */
+#define GM_TXF_1518B \
+			(GM_MIB_CNT_BASE + 280)	/* 1024-1518 Byte Tx Frame */
+#define GM_TXF_MAX_SZ \
+			(GM_MIB_CNT_BASE + 288)	/* 1519-MaxSize Byte Tx Frame */
+	/* GM_MIB_CNT_BASE + 296:	reserved */
+#define GM_TXF_COL \
+			(GM_MIB_CNT_BASE + 304)	/* Tx Collision */
+#define GM_TXF_LAT_COL \
+			(GM_MIB_CNT_BASE + 312)	/* Tx Late Collision */
+#define GM_TXF_ABO_COL \
+			(GM_MIB_CNT_BASE + 320)	/* Tx aborted due to Exces. Col. */
+#define GM_TXF_MUL_COL \
+			(GM_MIB_CNT_BASE + 328)	/* Tx Multiple Collision */
+#define GM_TXF_SNG_COL \
+			(GM_MIB_CNT_BASE + 336)	/* Tx Single Collision */
+#define GM_TXE_FIFO_UR \
+			(GM_MIB_CNT_BASE + 344)	/* Tx FIFO Underrun Event */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * GMAC Bit Definitions
+ *
+ * If the bit access behaviour differs from the register access behaviour
+ * (r/w, r/o) this is documented after the bit number.
+ * The following bit access behaviours are used:
+ *	(sc)	self clearing
+ *	(r/o)	read only
+ */
+
+/*	GM_GP_STAT	16 bit r/o	General Purpose Status Register */
+
+#define GM_GPSR_SPEED		(1<<15) /* Bit 15:	Port Speed (1 = 100 Mbps) */
+#define GM_GPSR_DUPLEX		(1<<14) /* Bit 14:	Duplex Mode (1 = Full) */
+#define GM_GPSR_FC_TX_DIS	(1<<13) /* Bit 13:	Tx Flow Control Mode Disabled */
+#define GM_GPSR_LINK_UP		(1<<12)	/* Bit 12:	Link Up Status */
+#define GM_GPSR_PAUSE		(1<<11)	/* Bit 11:	Pause State */
+#define GM_GPSR_TX_ACTIVE	(1<<10)	/* Bit 10:	Tx in Progress */
+#define GM_GPSR_EXC_COL		(1<<9)	/* Bit  9:	Excessive Collisions Occured */
+#define GM_GPSR_LAT_COL		(1<<8)	/* Bit  8:	Late Collisions Occured */
+								/* Bit  7..6:	reserved */
+#define GM_GPSR_PHY_ST_CH	(1<<5)	/* Bit  5:	PHY Status Change */
+#define GM_GPSR_GIG_SPEED	(1<<4)	/* Bit  4:	Gigabit Speed (1 = 1000 Mbps) */
+#define GM_GPSR_PART_MODE	(1<<3)	/* Bit  3:	Partition mode */
+#define GM_GPSR_FC_RX_DIS	(1<<2)	/* Bit  2:	Rx Flow Control Mode Disabled */
+#define GM_GPSR_PROM_EN		(1<<1)	/* Bit  1:	Promiscuous Mode Enabled */
+								/* Bit  0:	reserved */
+
+/*	GM_GP_CTRL	16 bit r/w	General Purpose Control Register */
+								/* Bit 15:	reserved */
+#define GM_GPCR_PROM_ENA	(1<<14)	/* Bit 14:	Enable Promiscuous Mode */
+#define GM_GPCR_FC_TX_DIS	(1<<13) /* Bit 13:	Disable Tx Flow Control Mode */
+#define GM_GPCR_TX_ENA		(1<<12) /* Bit 12:	Enable Transmit */
+#define GM_GPCR_RX_ENA		(1<<11) /* Bit 11:	Enable Receive */
+#define GM_GPCR_BURST_ENA	(1<<10)	/* Bit 10:	Enable Burst Mode */
+#define GM_GPCR_LOOP_ENA	(1<<9)	/* Bit  9:	Enable MAC Loopback Mode */
+#define GM_GPCR_PART_ENA	(1<<8)	/* Bit  8:	Enable Partition Mode */
+#define GM_GPCR_GIGS_ENA	(1<<7)	/* Bit  7:	Gigabit Speed (1000 Mbps) */
+#define GM_GPCR_FL_PASS		(1<<6)	/* Bit  6:	Force Link Pass */
+#define GM_GPCR_DUP_FULL	(1<<5)	/* Bit  5:	Full Duplex Mode */
+#define GM_GPCR_FC_RX_DIS	(1<<4)	/* Bit  4:	Disable Rx Flow Control Mode */
+#define GM_GPCR_SPEED_100	(1<<3)  /* Bit  3:	Port Speed 100 Mbps */
+#define GM_GPCR_AU_DUP_DIS	(1<<2)	/* Bit  2:	Disable Auto-Update for Duplex */
+#define GM_GPCR_AU_FCT_DIS	(1<<1)	/* Bit  1:	Disable Auto-Update for Flow-c. */
+#define GM_GPCR_AU_SPD_DIS	(1<<0)	/* Bit  0:	Disable Auto-Update for Speed */
+
+#define GM_GPCR_SPEED_1000	(GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
+#define GM_GPCR_AU_ALL_DIS	(GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\
+							 GM_GPCR_AU_SPD_DIS)
+
+/*	GM_TX_CTRL				16 bit r/w	Transmit Control Register */
+
+#define GM_TXCR_FORCE_JAM	(1<<15)	/* Bit 15:	Force Jam / Flow-Control */
+#define GM_TXCR_CRC_DIS		(1<<14)	/* Bit 14:	Disable insertion of CRC */
+#define GM_TXCR_PAD_DIS		(1<<13)	/* Bit 13:	Disable padding of packets */
+#define GM_TXCR_COL_THR		(4<<10)	/* Bit 12..10:	Collision Threshold */
+
+/*	GM_RX_CTRL				16 bit r/w	Receive Control Register */
+#define GM_RXCR_UCF_ENA		(1<<15)	/* Bit 15:	Enable Unicast filtering */
+#define GM_RXCR_MCF_ENA		(1<<14)	/* Bit 14:	Enable Multicast filtering */
+#define GM_RXCR_CRC_DIS		(1<<13)	/* Bit 13:	Remove 4-byte CRC */
+#define GM_RXCR_PASS_FC		(1<<12)	/* Bit 12:	Pass FC packets to FIFO */
+
+/*	GM_TX_PARAM				16 bit r/w	Transmit Parameter Register */
+#define GM_TXPA_JAMLEN_MSK	(0x03<<14)	/* Bit 15..14:	Jam Length */
+#define GM_TXPA_JAMIPG_MSK	(0x1f<<9)	/* Bit 13..9:	Jam IPG */
+#define GM_TXPA_JAMDAT_MSK	(0x1f<<4)	/* Bit  8..4:	IPG Jam to Data */
+								/* Bit  3..0:	reserved */
+#define JAM_LEN_VAL(x)		SHIFT14(x)
+#define JAM_IPG_VAL(x)		SHIFT9(x)
+#define IPG_JAM_DATA(x)		SHIFT4(x)
+
+/*	GM_SERIAL_MODE			16 bit r/w	Serial Mode Register */
+#define GM_SMOD_DATABL_MSK	(0x1f<<11)	/* Bit 15..11:	Data Blinder */
+#define GM_SMOD_LIMIT_4		(1<<10)	/* Bit 10:	4 consecutive transmit trials */
+#define GM_SMOD_VLAN_ENA	(1<<9)	/* Bit  9:	Enable VLAN  (Max. Frame Length) */
+#define GM_SMOD_JUMBO_ENA	(1<<8)	/* Bit  8:	Enable Jumbo (Max. Frame Length) */
+								/* Bit  7..5:	reserved */
+#define GM_SMOD_IPG_MSK		0x1f	/* Bit 4..0:	Inter-Packet Gap (IPG) */
+
+#define DATA_BLIND_VAL(x)	SHIFT11(x)
+#define DATA_BLIND_FAST_ETH	0x1c
+#define DATA_BLIND_GIGABIT	4
+
+#define IPG_VAL_FAST_ETH	0x1e
+#define IPG_VAL_GIGABIT		6
+
+/*	GM_SMI_CTRL				16 bit r/w	SMI Control Register */
+
+#define GM_SMI_CT_PHY_AD(x)	SHIFT11(x)
+#define GM_SMI_CT_REG_AD(x)	SHIFT6(x)
+#define GM_SMI_CT_OP_RD		(1<<5)	/* Bit  5:	OpCode Read (0=Write)*/
+#define GM_SMI_CT_RD_VAL	(1<<4)	/* Bit  4:	Read Valid (Read completed) */
+#define GM_SMI_CT_BUSY		(1<<3)	/* Bit  3:	Busy (Operation in progress) */
+								/* Bit   2..0:	reserved */
+
+/*	GM_PHY_ADDR				16 bit r/w	GPHY Address Register */
+								/* Bit  15..6:	reserved */
+#define GM_PAR_MIB_CLR		(1<<5)	/* Bit  5:	Set MIB Clear Counter Mode */
+#define GM_PAR_MIB_TST		(1<<4)	/* Bit  4:	MIB Load Counter (Test Mode) */
+								/* Bit   3..0:	reserved */
+
+/* Receive Frame Status Encoding */
+#define GMR_FS_LEN	(0xffffUL<<16)	/* Bit 31..16:	Rx Frame Length */
+								/* Bit  15..14:	reserved */
+#define GMR_FS_VLAN		(1L<<13)	/* Bit 13:	VLAN Packet */
+#define GMR_FS_JABBER	(1L<<12)	/* Bit 12:	Jabber Packet */
+#define GMR_FS_UN_SIZE	(1L<<11)	/* Bit 11:	Undersize Packet */
+#define GMR_FS_MC		(1L<<10)	/* Bit 10:	Multicast Packet */
+#define GMR_FS_BC		(1L<<9)		/* Bit  9:	Broadcast Packet */
+#define GMR_FS_RX_OK	(1L<<8)		/* Bit  8:	Receive OK (Good Packet) */
+#define GMR_FS_GOOD_FC	(1L<<7)		/* Bit  7:	Good Flow-Control Packet */
+#define GMR_FS_BAD_FC	(1L<<6)		/* Bit  6:	Bad  Flow-Control Packet */
+#define GMR_FS_MII_ERR	(1L<<5)		/* Bit  5:	MII Error */
+#define GMR_FS_LONG_ERR	(1L<<4)		/* Bit  4:	Too Long Packet */
+#define GMR_FS_FRAGMENT	(1L<<3)		/* Bit  3:	Fragment */
+								/* Bit  2:	reserved */
+#define GMR_FS_CRC_ERR	(1L<<1)		/* Bit  1:	CRC Error */
+#define GMR_FS_RX_FF_OV	(1L<<0)		/* Bit  0:	Rx FIFO Overflow */
+
+/*
+ * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR)
+ */
+#define GMR_FS_ANY_ERR	(GMR_FS_CRC_ERR | \
+			GMR_FS_LONG_ERR | \
+			GMR_FS_MII_ERR | \
+			GMR_FS_BAD_FC | \
+			GMR_FS_GOOD_FC | \
+			GMR_FS_JABBER)
+
+/* Rx GMAC FIFO Flush Mask (default) */
+#define RX_FF_FL_DEF_MSK	(GMR_FS_CRC_ERR | \
+			GMR_FS_RX_FF_OV | \
+			GMR_FS_MII_ERR | \
+			GMR_FS_BAD_FC | \
+			GMR_FS_GOOD_FC | \
+			GMR_FS_UN_SIZE | \
+			GMR_FS_JABBER)
+
+/* typedefs *******************************************************************/
+
+
+/* function prototypes ********************************************************/
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
+
+#endif	/* __INC_XMAC_H */