Merge git://www.denx.de/git/u-boot

Conflicts:

	board/tqm5200/tqm5200.c

1 files changed, 526 insertions, 0 deletions

diff --git a/drivers/net/pcnet.c b/drivers/net/pcnet.c
new file mode 100644
index 0000000..2af0e8f
--- /dev/null
+++ b/drivers/net/pcnet.c
@@ -0,0 +1,526 @@
+/*
+ * (C) Copyright 2002 Wolfgang Grandegger, wg@denx.de.
+ *
+ * This driver for AMD PCnet network controllers is derived from the
+ * Linux driver pcnet32.c written 1996-1999 by Thomas Bogendoerfer.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#if 0
+#define	PCNET_DEBUG_LEVEL	0 /* 0=off, 1=init, 2=rx/tx */
+#endif
+
+#if PCNET_DEBUG_LEVEL > 0
+#define	PCNET_DEBUG1(fmt,args...)	printf (fmt ,##args)
+#if PCNET_DEBUG_LEVEL > 1
+#define	PCNET_DEBUG2(fmt,args...)	printf (fmt ,##args)
+#else
+#define PCNET_DEBUG2(fmt,args...)
+#endif
+#else
+#define PCNET_DEBUG1(fmt,args...)
+#define PCNET_DEBUG2(fmt,args...)
+#endif
+
+#if defined(CONFIG_CMD_NET) \
+	&& defined(CONFIG_NET_MULTI) && defined(CONFIG_PCNET)
+
+#if !defined(CONF_PCNET_79C973) && defined(CONF_PCNET_79C975)
+#error "Macro for PCnet chip version is not defined!"
+#endif
+
+/*
+ * Set the number of Tx and Rx buffers, using Log_2(# buffers).
+ * Reasonable default values are 4 Tx buffers, and 16 Rx buffers.
+ * That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4).
+ */
+#define PCNET_LOG_TX_BUFFERS	0
+#define PCNET_LOG_RX_BUFFERS	2
+
+#define TX_RING_SIZE		(1 << (PCNET_LOG_TX_BUFFERS))
+#define TX_RING_LEN_BITS	((PCNET_LOG_TX_BUFFERS) << 12)
+
+#define RX_RING_SIZE		(1 << (PCNET_LOG_RX_BUFFERS))
+#define RX_RING_LEN_BITS	((PCNET_LOG_RX_BUFFERS) << 4)
+
+#define PKT_BUF_SZ		1544
+
+/* The PCNET Rx and Tx ring descriptors. */
+struct pcnet_rx_head {
+    u32 base;
+    s16 buf_length;
+    s16 status;
+    u32 msg_length;
+    u32 reserved;
+};
+
+struct pcnet_tx_head {
+    u32 base;
+    s16 length;
+    s16 status;
+    u32 misc;
+    u32 reserved;
+};
+
+/* The PCNET 32-Bit initialization block, described in databook. */
+struct pcnet_init_block {
+    u16 mode;
+    u16 tlen_rlen;
+    u8	phys_addr[6];
+    u16 reserved;
+    u32 filter[2];
+    /* Receive and transmit ring base, along with extra bits. */
+    u32 rx_ring;
+    u32 tx_ring;
+    u32 reserved2;
+};
+
+typedef struct pcnet_priv {
+    struct pcnet_rx_head    rx_ring[RX_RING_SIZE];
+    struct pcnet_tx_head    tx_ring[TX_RING_SIZE];
+    struct pcnet_init_block init_block;
+    /* Receive Buffer space */
+    unsigned char rx_buf[RX_RING_SIZE][PKT_BUF_SZ + 4];
+    int cur_rx;
+    int cur_tx;
+} pcnet_priv_t;
+
+static pcnet_priv_t *lp;
+
+/* Offsets from base I/O address for WIO mode */
+#define PCNET_RDP		0x10
+#define PCNET_RAP		0x12
+#define PCNET_RESET		0x14
+#define PCNET_BDP		0x16
+
+static u16 pcnet_read_csr (struct eth_device *dev, int index)
+{
+    outw (index, dev->iobase+PCNET_RAP);
+    return inw (dev->iobase+PCNET_RDP);
+}
+
+static void pcnet_write_csr (struct eth_device *dev, int index, u16 val)
+{
+    outw (index, dev->iobase+PCNET_RAP);
+    outw (val, dev->iobase+PCNET_RDP);
+}
+
+static u16 pcnet_read_bcr (struct eth_device *dev, int index)
+{
+    outw (index, dev->iobase+PCNET_RAP);
+    return inw (dev->iobase+PCNET_BDP);
+}
+
+static void pcnet_write_bcr (struct eth_device *dev, int index, u16 val)
+{
+    outw (index, dev->iobase+PCNET_RAP);
+    outw (val, dev->iobase+PCNET_BDP);
+}
+
+static void pcnet_reset (struct eth_device *dev)
+{
+    inw (dev->iobase+PCNET_RESET);
+}
+
+static int pcnet_check (struct eth_device *dev)
+{
+    outw (88, dev->iobase+PCNET_RAP);
+    return (inw (dev->iobase+PCNET_RAP) == 88);
+}
+
+static int  pcnet_init( struct eth_device* dev, bd_t *bis);
+static int  pcnet_send (struct eth_device* dev, volatile void *packet,
+			int length);
+static int  pcnet_recv (struct eth_device* dev);
+static void pcnet_halt (struct eth_device* dev);
+static int  pcnet_probe(struct eth_device* dev, bd_t *bis, int dev_num);
+
+#define PCI_TO_MEM(d,a) pci_phys_to_mem((pci_dev_t)d->priv, (u_long)(a))
+#define PCI_TO_MEM_LE(d,a) (u32)(cpu_to_le32(PCI_TO_MEM(d,a)))
+
+static struct pci_device_id supported[] = {
+	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE },
+	{ }
+};
+
+
+int pcnet_initialize(bd_t *bis)
+{
+    pci_dev_t devbusfn;
+    struct eth_device* dev;
+    u16 command, status;
+    int dev_nr = 0;
+
+    PCNET_DEBUG1("\npcnet_initialize...\n");
+
+    for (dev_nr = 0; ; dev_nr++) {
+
+	/*
+	 * Find the PCnet PCI device(s).
+	 */
+	if ((devbusfn = pci_find_devices(supported, dev_nr)) < 0) {
+	    break;
+	}
+
+	/*
+	 * Allocate and pre-fill the device structure.
+	 */
+	dev = (struct eth_device*) malloc(sizeof *dev);
+	dev->priv = (void *)devbusfn;
+	sprintf(dev->name, "pcnet#%d", dev_nr);
+
+	/*
+	 * Setup the PCI device.
+	 */
+	pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, (unsigned int *)&dev->iobase);
+	dev->iobase &= ~0xf;
+
+	PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%x: ",
+	       dev->name, devbusfn, dev->iobase);
+
+	command = PCI_COMMAND_IO | PCI_COMMAND_MASTER;
+	pci_write_config_word(devbusfn, PCI_COMMAND, command);
+	pci_read_config_word(devbusfn, PCI_COMMAND, &status);
+	if ((status & command) != command) {
+	    printf("%s: Couldn't enable IO access or Bus Mastering\n",
+		   dev->name);
+	    free(dev);
+	    continue;
+	}
+
+	pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x40);
+
+	/*
+	 * Probe the PCnet chip.
+	 */
+	if (pcnet_probe(dev, bis, dev_nr) < 0) {
+	    free(dev);
+	    continue;
+	}
+
+	/*
+	 * Setup device structure and register the driver.
+	 */
+	dev->init   = pcnet_init;
+	dev->halt   = pcnet_halt;
+	dev->send   = pcnet_send;
+	dev->recv   = pcnet_recv;
+
+	eth_register(dev);
+    }
+
+    udelay(10 * 1000);
+
+    return dev_nr;
+}
+
+static int pcnet_probe(struct eth_device* dev, bd_t *bis, int dev_nr)
+{
+    int chip_version;
+    char *chipname;
+#ifdef PCNET_HAS_PROM
+    int i;
+#endif
+
+    /* Reset the PCnet controller */
+    pcnet_reset(dev);
+
+    /* Check if register access is working */
+    if (pcnet_read_csr(dev, 0) != 4 || !pcnet_check(dev)) {
+	printf("%s: CSR register access check failed\n", dev->name);
+	return -1;
+    }
+
+    /* Identify the chip */
+    chip_version = pcnet_read_csr(dev, 88) | (pcnet_read_csr(dev,89) << 16);
+    if ((chip_version & 0xfff) != 0x003)
+       return -1;
+    chip_version = (chip_version >> 12) & 0xffff;
+    switch (chip_version) {
+#ifdef CONFIG_PCNET_79C973
+    case 0x2625:
+	chipname = "PCnet/FAST III 79C973"; /* PCI */
+	break;
+#endif
+#ifdef CONFIG_PCNET_79C975
+    case 0x2627:
+	chipname = "PCnet/FAST III 79C975"; /* PCI */
+	break;
+#endif
+    default:
+	printf("%s: PCnet version %#x not supported\n",
+	       dev->name, chip_version);
+	return -1;
+    }
+
+    PCNET_DEBUG1("AMD %s\n", chipname);
+
+#ifdef PCNET_HAS_PROM
+    /*
+     * In most chips, after a chip reset, the ethernet address is read from
+     * the station address PROM at the base address and programmed into the
+     * "Physical Address Registers" CSR12-14.
+     */
+    for (i = 0; i < 3; i++) {
+	unsigned int val;
+	val = pcnet_read_csr(dev, i+12) & 0x0ffff;
+	/* There may be endianness issues here. */
+	dev->enetaddr[2*i  ] =  val       & 0x0ff;
+	dev->enetaddr[2*i+1] = (val >> 8) & 0x0ff;
+    }
+#endif /* PCNET_HAS_PROM */
+
+    return 0;
+}
+
+static int pcnet_init(struct eth_device* dev, bd_t *bis)
+{
+    int i, val;
+    u32 addr;
+
+    PCNET_DEBUG1("%s: pcnet_init...\n", dev->name);
+
+    /* Switch pcnet to 32bit mode */
+    pcnet_write_bcr (dev, 20, 2);
+
+#ifdef CONFIG_PN62
+    /* Setup LED registers */
+    val = pcnet_read_bcr (dev, 2) | 0x1000;
+    pcnet_write_bcr (dev, 2, val);    /* enable LEDPE */
+    pcnet_write_bcr (dev, 4, 0x5080); /* 100MBit */
+    pcnet_write_bcr (dev, 5, 0x40c0); /* LNKSE */
+    pcnet_write_bcr (dev, 6, 0x4090); /* TX Activity */
+    pcnet_write_bcr (dev, 7, 0x4084); /* RX Activity */
+#endif
+
+    /* Set/reset autoselect bit */
+    val = pcnet_read_bcr (dev, 2) & ~2;
+    val |= 2;
+    pcnet_write_bcr (dev, 2, val);
+
+    /* Enable auto negotiate, setup, disable fd */
+    val = pcnet_read_bcr(dev, 32) & ~0x98;
+    val |= 0x20;
+    pcnet_write_bcr(dev, 32, val);
+
+    /*
+     * We only maintain one structure because the drivers will never
+     * be used concurrently. In 32bit mode the RX and TX ring entries
+     * must be aligned on 16-byte boundaries.
+     */
+    if (lp == NULL) {
+	addr = (u32)malloc(sizeof(pcnet_priv_t) + 0x10);
+	addr = (addr + 0xf) & ~0xf;
+	lp = (pcnet_priv_t *)addr;
+    }
+
+    lp->init_block.mode = cpu_to_le16(0x0000);
+    lp->init_block.filter[0] = 0x00000000;
+    lp->init_block.filter[1] = 0x00000000;
+
+    /*
+     * Initialize the Rx ring.
+     */
+    lp->cur_rx = 0;
+    for (i = 0; i < RX_RING_SIZE; i++) {
+	lp->rx_ring[i].base = PCI_TO_MEM_LE(dev, lp->rx_buf[i]);
+	lp->rx_ring[i].buf_length = cpu_to_le16(-PKT_BUF_SZ);
+	lp->rx_ring[i].status = cpu_to_le16(0x8000);
+	PCNET_DEBUG1("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n",
+	       i, lp->rx_ring[i].base, lp->rx_ring[i].buf_length,
+	       lp->rx_ring[i].status);
+    }
+
+    /*
+     * Initialize the Tx ring. The Tx buffer address is filled in as
+     * needed, but we do need to clear the upper ownership bit.
+     */
+    lp->cur_tx = 0;
+    for (i = 0; i < TX_RING_SIZE; i++) {
+	lp->tx_ring[i].base = 0;
+	lp->tx_ring[i].status = 0;
+    }
+
+    /*
+     * Setup Init Block.
+     */
+    PCNET_DEBUG1("Init block at 0x%p: MAC", &lp->init_block);
+
+    for (i = 0; i < 6; i++) {
+	lp->init_block.phys_addr[i] = dev->enetaddr[i];
+	PCNET_DEBUG1(" %02x", lp->init_block.phys_addr[i]);
+    }
+
+    lp->init_block.tlen_rlen = cpu_to_le16(TX_RING_LEN_BITS |
+					   RX_RING_LEN_BITS);
+    lp->init_block.rx_ring = PCI_TO_MEM_LE(dev, lp->rx_ring);
+    lp->init_block.tx_ring = PCI_TO_MEM_LE(dev, lp->tx_ring);
+
+    PCNET_DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
+	   lp->init_block.tlen_rlen,
+	   lp->init_block.rx_ring, lp->init_block.tx_ring);
+
+    /*
+     * Tell the controller where the Init Block is located.
+     */
+    addr = PCI_TO_MEM(dev, &lp->init_block);
+    pcnet_write_csr(dev, 1, addr & 0xffff);
+    pcnet_write_csr(dev, 2, (addr >> 16) & 0xffff);
+
+    pcnet_write_csr (dev, 4, 0x0915);
+    pcnet_write_csr (dev, 0, 0x0001); /* start */
+
+    /* Wait for Init Done bit */
+    for (i = 10000; i > 0; i--) {
+	if (pcnet_read_csr (dev, 0) & 0x0100)
+	    break;
+	udelay(10);
+    }
+    if (i <= 0) {
+	printf("%s: TIMEOUT: controller init failed\n", dev->name);
+	pcnet_reset (dev);
+	return 0;
+    }
+
+    /*
+     * Finally start network controller operation.
+     */
+    pcnet_write_csr (dev, 0, 0x0002);
+
+    return 1;
+}
+
+static int pcnet_send(struct eth_device* dev, volatile void *packet, int pkt_len)
+{
+    int i, status;
+    struct pcnet_tx_head *entry = &lp->tx_ring[lp->cur_tx];
+
+    PCNET_DEBUG2("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len, packet);
+
+    /* Wait for completion by testing the OWN bit */
+    for (i = 1000; i > 0; i--) {
+	status = le16_to_cpu(entry->status);
+	if ((status & 0x8000) == 0)
+	    break;
+	udelay(100);
+	PCNET_DEBUG2(".");
+    }
+    if (i <= 0) {
+	printf("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n",
+	       dev->name, lp->cur_tx, status);
+	pkt_len = 0;
+	goto failure;
+    }
+
+    /*
+     * Setup Tx ring. Caution: the write order is important here,
+     * set the status with the "ownership" bits last.
+     */
+    status = 0x8300;
+    entry->length = le16_to_cpu(-pkt_len);
+    entry->misc   = 0x00000000;
+    entry->base   = PCI_TO_MEM_LE(dev, packet);
+    entry->status = le16_to_cpu(status);
+
+    /* Trigger an immediate send poll. */
+    pcnet_write_csr (dev, 0, 0x0008);
+
+ failure:
+    if (++lp->cur_tx >= TX_RING_SIZE)
+	lp->cur_tx = 0;
+
+    PCNET_DEBUG2("done\n");
+    return pkt_len;
+}
+
+static int pcnet_recv(struct eth_device* dev)
+{
+    struct pcnet_rx_head *entry;
+    int pkt_len = 0;
+    u16 status;
+
+    while (1) {
+	entry = &lp->rx_ring[lp->cur_rx];
+	/*
+	 * If we own the next entry, it's a new packet. Send it up.
+	 */
+	if (((status = le16_to_cpu(entry->status)) & 0x8000) != 0) {
+	    break;
+	}
+	status >>= 8;
+
+	if (status != 0x03) {	/* There was an error. */
+
+	    printf("%s: Rx%d", dev->name, lp->cur_rx);
+	    PCNET_DEBUG1(" (status=0x%x)", status);
+	    if (status & 0x20) printf(" Frame");
+	    if (status & 0x10) printf(" Overflow");
+	    if (status & 0x08) printf(" CRC");
+	    if (status & 0x04) printf(" Fifo");
+	    printf(" Error\n");
+	    entry->status &= le16_to_cpu(0x03ff);
+
+	} else {
+
+	    pkt_len = (le32_to_cpu(entry->msg_length) & 0xfff) - 4;
+	    if (pkt_len < 60) {
+		printf("%s: Rx%d: invalid packet length %d\n",
+		       dev->name, lp->cur_rx, pkt_len);
+	    } else {
+		NetReceive(lp->rx_buf[lp->cur_rx], pkt_len);
+		PCNET_DEBUG2("Rx%d: %d bytes from 0x%p\n",
+		       lp->cur_rx, pkt_len, lp->rx_buf[lp->cur_rx]);
+	    }
+	}
+	entry->status |= cpu_to_le16(0x8000);
+
+	if (++lp->cur_rx >= RX_RING_SIZE)
+	    lp->cur_rx = 0;
+    }
+    return pkt_len;
+}
+
+static void pcnet_halt(struct eth_device* dev)
+{
+    int i;
+
+    PCNET_DEBUG1("%s: pcnet_halt...\n", dev->name);
+
+    /* Reset the PCnet controller */
+    pcnet_reset (dev);
+
+    /* Wait for Stop bit */
+    for (i = 1000; i > 0; i--) {
+	if (pcnet_read_csr (dev, 0) & 0x4)
+	    break;
+	udelay(10);
+    }
+    if (i <= 0) {
+	printf("%s: TIMEOUT: controller reset failed\n", dev->name);
+    }
+}
+
+#endif