summaryrefslogtreecommitdiff
path: root/drivers/net/pch_gbe.c
diff options
context:
space:
mode:
authorBin Meng <bmeng.cn@gmail.com>2015-03-20 17:12:20 +0800
committerSimon Glass <sjg@chromium.org>2015-03-24 21:22:37 -0600
commit8ee443b8ebb6f533e5f42d8da05600a1996a4dfd (patch)
treeec98bbd2bafef24ed0802e524000434d68a7b464 /drivers/net/pch_gbe.c
parentc58ea6cb8c01b4e43e414cdc26bc29ad52284f21 (diff)
downloadu-boot-imx-8ee443b8ebb6f533e5f42d8da05600a1996a4dfd.zip
u-boot-imx-8ee443b8ebb6f533e5f42d8da05600a1996a4dfd.tar.gz
u-boot-imx-8ee443b8ebb6f533e5f42d8da05600a1996a4dfd.tar.bz2
net: Add Intel Topcliff GMAC driver
Add a new driver for the Gigabit Ethernet MAC found on Intel Topcliff Platform Controller Hub. Tested under 10/100 half/full duplex and 1000 full duplex modes using ping and tftpboot commands. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Diffstat (limited to 'drivers/net/pch_gbe.c')
-rw-r--r--drivers/net/pch_gbe.c466
1 files changed, 466 insertions, 0 deletions
diff --git a/drivers/net/pch_gbe.c b/drivers/net/pch_gbe.c
new file mode 100644
index 0000000..976848d
--- /dev/null
+++ b/drivers/net/pch_gbe.c
@@ -0,0 +1,466 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * Intel Platform Controller Hub EG20T (codename Topcliff) GMAC Driver
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <malloc.h>
+#include <miiphy.h>
+#include "pch_gbe.h"
+
+#if !defined(CONFIG_PHYLIB)
+# error "PCH Gigabit Ethernet driver requires PHYLIB - missing CONFIG_PHYLIB"
+#endif
+
+static struct pci_device_id supported[] = {
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_GBE },
+ { }
+};
+
+static void pch_gbe_mac_read(struct pch_gbe_regs *mac_regs, u8 *addr)
+{
+ u32 macid_hi, macid_lo;
+
+ macid_hi = readl(&mac_regs->mac_adr[0].high);
+ macid_lo = readl(&mac_regs->mac_adr[0].low) & 0xffff;
+ debug("pch_gbe: macid_hi %#x macid_lo %#x\n", macid_hi, macid_lo);
+
+ addr[0] = (u8)(macid_hi & 0xff);
+ addr[1] = (u8)((macid_hi >> 8) & 0xff);
+ addr[2] = (u8)((macid_hi >> 16) & 0xff);
+ addr[3] = (u8)((macid_hi >> 24) & 0xff);
+ addr[4] = (u8)(macid_lo & 0xff);
+ addr[5] = (u8)((macid_lo >> 8) & 0xff);
+}
+
+static int pch_gbe_mac_write(struct pch_gbe_regs *mac_regs, u8 *addr)
+{
+ u32 macid_hi, macid_lo;
+ ulong start;
+
+ macid_hi = addr[0] + (addr[1] << 8) + (addr[2] << 16) + (addr[3] << 24);
+ macid_lo = addr[4] + (addr[5] << 8);
+
+ writel(macid_hi, &mac_regs->mac_adr[0].high);
+ writel(macid_lo, &mac_regs->mac_adr[0].low);
+ writel(0xfffe, &mac_regs->addr_mask);
+
+ start = get_timer(0);
+ while (get_timer(start) < PCH_GBE_TIMEOUT) {
+ if (!(readl(&mac_regs->addr_mask) & PCH_GBE_BUSY))
+ return 0;
+
+ udelay(10);
+ }
+
+ return -ETIME;
+}
+
+static int pch_gbe_reset(struct eth_device *dev)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+ struct pch_gbe_regs *mac_regs = priv->mac_regs;
+ ulong start;
+
+ priv->rx_idx = 0;
+ priv->tx_idx = 0;
+
+ writel(PCH_GBE_ALL_RST, &mac_regs->reset);
+
+ /*
+ * Configure the MAC to RGMII mode after reset
+ *
+ * For some unknown reason, we must do the configuration here right
+ * after resetting the whole MAC, otherwise the reset bit in the RESET
+ * register will never be cleared by the hardware. And there is another
+ * way of having the same magic, that is to configure the MODE register
+ * to have the MAC work in MII/GMII mode, which is how current Linux
+ * pch_gbe driver does. Since anyway we need program the MAC to RGMII
+ * mode in the driver, we just do it here.
+ *
+ * Note: this behavior is not documented in the hardware manual.
+ */
+ writel(PCH_GBE_RGMII_MODE_RGMII | PCH_GBE_CHIP_TYPE_INTERNAL,
+ &mac_regs->rgmii_ctrl);
+
+ start = get_timer(0);
+ while (get_timer(start) < PCH_GBE_TIMEOUT) {
+ if (!(readl(&mac_regs->reset) & PCH_GBE_ALL_RST)) {
+ /*
+ * Soft reset clears hardware MAC address registers,
+ * so we have to reload MAC address here in order to
+ * make linux pch_gbe driver happy.
+ */
+ return pch_gbe_mac_write(mac_regs, dev->enetaddr);
+ }
+
+ udelay(10);
+ }
+
+ debug("pch_gbe: reset timeout\n");
+ return -ETIME;
+}
+
+static void pch_gbe_rx_descs_init(struct eth_device *dev)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+ struct pch_gbe_regs *mac_regs = priv->mac_regs;
+ struct pch_gbe_rx_desc *rx_desc = &priv->rx_desc[0];
+ int i;
+
+ memset(rx_desc, 0, sizeof(struct pch_gbe_rx_desc) * PCH_GBE_DESC_NUM);
+ for (i = 0; i < PCH_GBE_DESC_NUM; i++)
+ rx_desc->buffer_addr = pci_phys_to_mem(priv->bdf,
+ (u32)(priv->rx_buff[i]));
+
+ writel(pci_phys_to_mem(priv->bdf, (u32)rx_desc),
+ &mac_regs->rx_dsc_base);
+ writel(sizeof(struct pch_gbe_rx_desc) * (PCH_GBE_DESC_NUM - 1),
+ &mac_regs->rx_dsc_size);
+
+ writel(pci_phys_to_mem(priv->bdf, (u32)(rx_desc + 1)),
+ &mac_regs->rx_dsc_sw_p);
+}
+
+static void pch_gbe_tx_descs_init(struct eth_device *dev)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+ struct pch_gbe_regs *mac_regs = priv->mac_regs;
+ struct pch_gbe_tx_desc *tx_desc = &priv->tx_desc[0];
+
+ memset(tx_desc, 0, sizeof(struct pch_gbe_tx_desc) * PCH_GBE_DESC_NUM);
+
+ writel(pci_phys_to_mem(priv->bdf, (u32)tx_desc),
+ &mac_regs->tx_dsc_base);
+ writel(sizeof(struct pch_gbe_tx_desc) * (PCH_GBE_DESC_NUM - 1),
+ &mac_regs->tx_dsc_size);
+ writel(pci_phys_to_mem(priv->bdf, (u32)(tx_desc + 1)),
+ &mac_regs->tx_dsc_sw_p);
+}
+
+static void pch_gbe_adjust_link(struct pch_gbe_regs *mac_regs,
+ struct phy_device *phydev)
+{
+ if (!phydev->link) {
+ printf("%s: No link.\n", phydev->dev->name);
+ return;
+ }
+
+ clrbits_le32(&mac_regs->rgmii_ctrl,
+ PCH_GBE_RGMII_RATE_2_5M | PCH_GBE_CRS_SEL);
+ clrbits_le32(&mac_regs->mode,
+ PCH_GBE_MODE_GMII_ETHER | PCH_GBE_MODE_FULL_DUPLEX);
+
+ switch (phydev->speed) {
+ case 1000:
+ setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_125M);
+ setbits_le32(&mac_regs->mode, PCH_GBE_MODE_GMII_ETHER);
+ break;
+ case 100:
+ setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_25M);
+ setbits_le32(&mac_regs->mode, PCH_GBE_MODE_MII_ETHER);
+ break;
+ case 10:
+ setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_2_5M);
+ setbits_le32(&mac_regs->mode, PCH_GBE_MODE_MII_ETHER);
+ break;
+ }
+
+ if (phydev->duplex) {
+ setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_CRS_SEL);
+ setbits_le32(&mac_regs->mode, PCH_GBE_MODE_FULL_DUPLEX);
+ }
+
+ printf("Speed: %d, %s duplex\n", phydev->speed,
+ (phydev->duplex) ? "full" : "half");
+
+ return;
+}
+
+static int pch_gbe_init(struct eth_device *dev, bd_t *bis)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+ struct pch_gbe_regs *mac_regs = priv->mac_regs;
+
+ if (pch_gbe_reset(dev))
+ return -1;
+
+ pch_gbe_rx_descs_init(dev);
+ pch_gbe_tx_descs_init(dev);
+
+ /* Enable frame bursting */
+ writel(PCH_GBE_MODE_FR_BST, &mac_regs->mode);
+ /* Disable TCP/IP accelerator */
+ writel(PCH_GBE_RX_TCPIPACC_OFF, &mac_regs->tcpip_acc);
+ /* Disable RX flow control */
+ writel(0, &mac_regs->rx_fctrl);
+ /* Configure RX/TX mode */
+ writel(PCH_GBE_RH_ALM_EMP_16 | PCH_GBE_RH_ALM_FULL_16 |
+ PCH_GBE_RH_RD_TRG_32, &mac_regs->rx_mode);
+ writel(PCH_GBE_TM_TH_TX_STRT_32 | PCH_GBE_TM_TH_ALM_EMP_16 |
+ PCH_GBE_TM_TH_ALM_FULL_32 | PCH_GBE_TM_ST_AND_FD |
+ PCH_GBE_TM_SHORT_PKT, &mac_regs->tx_mode);
+
+ /* Start up the PHY */
+ if (phy_startup(priv->phydev)) {
+ printf("Could not initialize PHY %s\n",
+ priv->phydev->dev->name);
+ return -1;
+ }
+
+ pch_gbe_adjust_link(mac_regs, priv->phydev);
+
+ if (!priv->phydev->link)
+ return -1;
+
+ /* Enable TX & RX */
+ writel(PCH_GBE_RX_DMA_EN | PCH_GBE_TX_DMA_EN, &mac_regs->dma_ctrl);
+ writel(PCH_GBE_MRE_MAC_RX_EN, &mac_regs->mac_rx_en);
+
+ return 0;
+}
+
+static void pch_gbe_halt(struct eth_device *dev)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+
+ pch_gbe_reset(dev);
+
+ phy_shutdown(priv->phydev);
+}
+
+static int pch_gbe_send(struct eth_device *dev, void *packet, int length)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+ struct pch_gbe_regs *mac_regs = priv->mac_regs;
+ struct pch_gbe_tx_desc *tx_head, *tx_desc;
+ u16 frame_ctrl = 0;
+ u32 int_st;
+ ulong start;
+
+ tx_head = &priv->tx_desc[0];
+ tx_desc = &priv->tx_desc[priv->tx_idx];
+
+ if (length < 64)
+ frame_ctrl |= PCH_GBE_TXD_CTRL_APAD;
+
+ tx_desc->buffer_addr = pci_phys_to_mem(priv->bdf, (u32)packet);
+ tx_desc->length = length;
+ tx_desc->tx_words_eob = length + 3;
+ tx_desc->tx_frame_ctrl = frame_ctrl;
+ tx_desc->dma_status = 0;
+ tx_desc->gbec_status = 0;
+
+ /* Test the wrap-around condition */
+ if (++priv->tx_idx >= PCH_GBE_DESC_NUM)
+ priv->tx_idx = 0;
+
+ writel(pci_phys_to_mem(priv->bdf, (u32)(tx_head + priv->tx_idx)),
+ &mac_regs->tx_dsc_sw_p);
+
+ start = get_timer(0);
+ while (get_timer(start) < PCH_GBE_TIMEOUT) {
+ int_st = readl(&mac_regs->int_st);
+ if (int_st & PCH_GBE_INT_TX_CMPLT)
+ return 0;
+
+ udelay(10);
+ }
+
+ debug("pch_gbe: sent failed\n");
+ return -ETIME;
+}
+
+static int pch_gbe_recv(struct eth_device *dev)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+ struct pch_gbe_regs *mac_regs = priv->mac_regs;
+ struct pch_gbe_rx_desc *rx_head, *rx_desc;
+ u32 hw_desc, buffer_addr, length;
+ int rx_swp;
+
+ rx_head = &priv->rx_desc[0];
+ rx_desc = &priv->rx_desc[priv->rx_idx];
+
+ readl(&mac_regs->int_st);
+ hw_desc = readl(&mac_regs->rx_dsc_hw_p_hld);
+
+ /* Just return if not receiving any packet */
+ if ((u32)rx_desc == hw_desc)
+ return 0;
+
+ buffer_addr = pci_mem_to_phys(priv->bdf, rx_desc->buffer_addr);
+ length = rx_desc->rx_words_eob - 3 - ETH_FCS_LEN;
+ NetReceive((uchar *)buffer_addr, length);
+
+ /* Test the wrap-around condition */
+ if (++priv->rx_idx >= PCH_GBE_DESC_NUM)
+ priv->rx_idx = 0;
+ rx_swp = priv->rx_idx;
+ if (++rx_swp >= PCH_GBE_DESC_NUM)
+ rx_swp = 0;
+
+ writel(pci_phys_to_mem(priv->bdf, (u32)(rx_head + rx_swp)),
+ &mac_regs->rx_dsc_sw_p);
+
+ return length;
+}
+
+static int pch_gbe_mdio_ready(struct pch_gbe_regs *mac_regs)
+{
+ ulong start = get_timer(0);
+
+ while (get_timer(start) < PCH_GBE_TIMEOUT) {
+ if (readl(&mac_regs->miim) & PCH_GBE_MIIM_OPER_READY)
+ return 0;
+
+ udelay(10);
+ }
+
+ return -ETIME;
+}
+
+static int pch_gbe_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
+{
+ struct pch_gbe_regs *mac_regs = bus->priv;
+ u32 miim;
+
+ if (pch_gbe_mdio_ready(mac_regs))
+ return -ETIME;
+
+ miim = (addr << PCH_GBE_MIIM_PHY_ADDR_SHIFT) |
+ (reg << PCH_GBE_MIIM_REG_ADDR_SHIFT) |
+ PCH_GBE_MIIM_OPER_READ;
+ writel(miim, &mac_regs->miim);
+
+ if (pch_gbe_mdio_ready(mac_regs))
+ return -ETIME;
+
+ return readl(&mac_regs->miim) & 0xffff;
+}
+
+static int pch_gbe_mdio_write(struct mii_dev *bus, int addr, int devad,
+ int reg, u16 val)
+{
+ struct pch_gbe_regs *mac_regs = bus->priv;
+ u32 miim;
+
+ if (pch_gbe_mdio_ready(mac_regs))
+ return -ETIME;
+
+ miim = (addr << PCH_GBE_MIIM_PHY_ADDR_SHIFT) |
+ (reg << PCH_GBE_MIIM_REG_ADDR_SHIFT) |
+ PCH_GBE_MIIM_OPER_WRITE | val;
+ writel(miim, &mac_regs->miim);
+
+ if (pch_gbe_mdio_ready(mac_regs))
+ return -ETIME;
+ else
+ return 0;
+}
+
+static int pch_gbe_mdio_init(char *name, struct pch_gbe_regs *mac_regs)
+{
+ struct mii_dev *bus;
+
+ bus = mdio_alloc();
+ if (!bus) {
+ debug("pch_gbe: failed to allocate MDIO bus\n");
+ return -ENOMEM;
+ }
+
+ bus->read = pch_gbe_mdio_read;
+ bus->write = pch_gbe_mdio_write;
+ sprintf(bus->name, name);
+
+ bus->priv = (void *)mac_regs;
+
+ return mdio_register(bus);
+}
+
+static int pch_gbe_phy_init(struct eth_device *dev)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+ struct phy_device *phydev;
+ int mask = 0xffffffff;
+
+ phydev = phy_find_by_mask(priv->bus, mask, priv->interface);
+ if (!phydev) {
+ printf("pch_gbe: cannot find the phy\n");
+ return -1;
+ }
+
+ phy_connect_dev(phydev, dev);
+
+ phydev->supported &= PHY_GBIT_FEATURES;
+ phydev->advertising = phydev->supported;
+
+ priv->phydev = phydev;
+ phy_config(phydev);
+
+ return 1;
+}
+
+int pch_gbe_register(bd_t *bis)
+{
+ struct eth_device *dev;
+ struct pch_gbe_priv *priv;
+ pci_dev_t devno;
+ u32 iobase;
+
+ devno = pci_find_devices(supported, 0);
+ if (devno == -1)
+ return -ENODEV;
+
+ dev = (struct eth_device *)malloc(sizeof(*dev));
+ if (!dev)
+ return -ENOMEM;
+ memset(dev, 0, sizeof(*dev));
+
+ /*
+ * The priv structure contains the descriptors and frame buffers which
+ * need a strict buswidth alignment (64 bytes)
+ */
+ priv = (struct pch_gbe_priv *)memalign(PCH_GBE_ALIGN_SIZE,
+ sizeof(*priv));
+ if (!priv) {
+ free(dev);
+ return -ENOMEM;
+ }
+ memset(priv, 0, sizeof(*priv));
+
+ dev->priv = priv;
+ priv->dev = dev;
+ priv->bdf = devno;
+
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
+ iobase &= PCI_BASE_ADDRESS_MEM_MASK;
+ iobase = pci_mem_to_phys(devno, iobase);
+
+ dev->iobase = iobase;
+ priv->mac_regs = (struct pch_gbe_regs *)iobase;
+
+ sprintf(dev->name, "pch_gbe.%x", iobase);
+
+ /* Read MAC address from SROM and initialize dev->enetaddr with it */
+ pch_gbe_mac_read(priv->mac_regs, dev->enetaddr);
+
+ dev->init = pch_gbe_init;
+ dev->halt = pch_gbe_halt;
+ dev->send = pch_gbe_send;
+ dev->recv = pch_gbe_recv;
+
+ eth_register(dev);
+
+ priv->interface = PHY_INTERFACE_MODE_RGMII;
+ pch_gbe_mdio_init(dev->name, priv->mac_regs);
+ priv->bus = miiphy_get_dev_by_name(dev->name);
+
+ return pch_gbe_phy_init(dev);
+}