ARM: NET: Remove the IXP NPE ethernet driver

This driver is no longer used, remove it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Michael Schwingen <michael@schwingen.org>
Cc: Tom Rini <trini@ti.com>

1 files changed, 0 insertions, 1025 deletions

diff --git a/drivers/net/npe/IxEthAccCommon.c b/drivers/net/npe/IxEthAccCommon.c
deleted file mode 100644
index 8249737..0000000
--- a/drivers/net/npe/IxEthAccCommon.c
+++ /dev/null
@@ -1,1025 +0,0 @@
-/**
- * @file IxEthAccCommon.c
- *
- * @author Intel Corporation
- * @date 12-Feb-2002
- *
- * @brief This file contains the implementation common support routines for the component
- *
- * Design Notes:
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/*
- * Component header files
- */
-
-#include "IxOsal.h"
-#include "IxEthAcc.h"
-#include "IxEthDB.h"
-#include "IxNpeMh.h"
-#include "IxEthDBPortDefs.h"
-#include "IxFeatureCtrl.h"
-#include "IxEthAcc_p.h"
-#include "IxEthAccQueueAssign_p.h"
-
-#include "IxEthAccDataPlane_p.h"
-#include "IxEthAccMii_p.h"
-
-/**
- * @addtogroup IxEthAccPri
- *@{
- */
-
-extern IxEthAccInfo   ixEthAccDataInfo;
-
-/**
- *
- * @brief Maximum number of RX queues set to be the maximum number
- * of traffic calsses.
- *
- */
-#define IX_ETHACC_MAX_RX_QUEUES \
-      (IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY \
-      - IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY \
-      + 1)
-
-/**
- *
- * @brief Maximum number of 128 entry RX queues
- *
- */
-#define IX_ETHACC_MAX_LARGE_RX_QUEUES 4
-
-/**
- *
- * @brief Data structure template for Default RX Queues
- *
- */
-IX_ETH_ACC_PRIVATE
-IxEthAccQregInfo ixEthAccQmgrRxDefaultTemplate =
-  {
-    IX_ETH_ACC_RX_FRAME_ETH_Q,	     /**< Queue ID */
-    "Eth Rx Q",
-    ixEthRxFrameQMCallback,          /**< Functional callback */
-    (IxQMgrCallbackId) 0,	     /**< Callback tag	      */
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    true,			     /**< Enable Q notification at startup */
-    IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE,/**< Q Condition to drive callback   */
-    IX_QMGR_Q_WM_LEVEL0,	     /**< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL1,	     /**< Q High water mark - needed by NPE */
-  };
-
-/**
- *
- * @brief Data structure template for Small RX Queues
- *
- */
-IX_ETH_ACC_PRIVATE
-IxEthAccQregInfo ixEthAccQmgrRxSmallTemplate =
-  {
-    IX_ETH_ACC_RX_FRAME_ETH_Q,	     /**< Queue ID */
-    "Eth Rx Q",
-    ixEthRxFrameQMCallback,          /**< Functional callback */
-    (IxQMgrCallbackId) 0,	     /**< Callback tag	      */
-    IX_QMGR_Q_SIZE64,		     /**< Allocate Smaller Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    true,			     /**< Enable Q notification at startup */
-    IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE,/**< Q Condition to drive callback   */
-    IX_QMGR_Q_WM_LEVEL0,	     /**< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL1,	     /**< Q High water mark - needed by NPE */
-  };
-
-
-/**
- *
- * @brief Data structure used to register & initialize the Queues
- *
- */
-IX_ETH_ACC_PRIVATE
-IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
-{
-  {
-    IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q,
-    "Eth Rx Fr Q 1",
-    ixEthRxFreeQMCallback,
-    (IxQMgrCallbackId) IX_ETH_PORT_1,
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    false,			     /**< Disable Q notification at startup */
-    IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q_SOURCE, /**< Q Condition to drive callback  */
-    IX_QMGR_Q_WM_LEVEL0,	     /***< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL64,	     /**< Q High water mark */
-  },
-
-  {
-    IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q,
-    "Eth Rx Fr Q 2",
-    ixEthRxFreeQMCallback,
-    (IxQMgrCallbackId) IX_ETH_PORT_2,
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    false,			     /**< Disable Q notification at startup */
-    IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q_SOURCE,  /**< Q Condition to drive callback  */
-    IX_QMGR_Q_WM_LEVEL0,	     /**< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL64,	     /**< Q High water mark */
-  },
-#ifdef __ixp46X
-  {
-    IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q,
-    "Eth Rx Fr Q 3",
-    ixEthRxFreeQMCallback,
-    (IxQMgrCallbackId) IX_ETH_PORT_3,
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    false,			     /**< Disable Q notification at startup */
-    IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q_SOURCE,  /**< Q Condition to drive callback  */
-    IX_QMGR_Q_WM_LEVEL0,	     /**< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL64,	     /**< Q High water mark */
-  },
-#endif
-  {
-     IX_ETH_ACC_TX_FRAME_ENET0_Q,
-    "Eth Tx Q 1",
-     ixEthTxFrameQMCallback,
-     (IxQMgrCallbackId) IX_ETH_PORT_1,
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    false,			     /**< Disable Q notification at startup */
-    IX_ETH_ACC_TX_FRAME_ENET0_Q_SOURCE,	 /**< Q Condition to drive callback  */
-    IX_QMGR_Q_WM_LEVEL0,	     /**< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL64,	     /**< Q High water mark */
-  },
-
-  {
-     IX_ETH_ACC_TX_FRAME_ENET1_Q,
-    "Eth Tx Q 2",
-     ixEthTxFrameQMCallback,
-     (IxQMgrCallbackId) IX_ETH_PORT_2,
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    false,			     /**< Disable Q notification at startup */
-    IX_ETH_ACC_TX_FRAME_ENET1_Q_SOURCE,	     /**< Q Condition to drive callback  */
-    IX_QMGR_Q_WM_LEVEL0,	     /**< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL64,	     /**< Q High water mark */
-  },
-#ifdef __ixp46X
-  {
-     IX_ETH_ACC_TX_FRAME_ENET2_Q,
-    "Eth Tx Q 3",
-     ixEthTxFrameQMCallback,
-     (IxQMgrCallbackId) IX_ETH_PORT_3,
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /** Queue Entry Sizes - all Q entries are single ord entries   */
-    false,			     /** Disable Q notification at startup */
-    IX_ETH_ACC_TX_FRAME_ENET2_Q_SOURCE,	     /** Q Condition to drive callback  */
-    IX_QMGR_Q_WM_LEVEL0,	     /* No queues use almost empty */
-    IX_QMGR_Q_WM_LEVEL64,	      /** Q High water mark - needed used  */
-  },
-#endif
-  {
-     IX_ETH_ACC_TX_FRAME_DONE_ETH_Q,
-    "Eth Tx Done Q",
-     ixEthTxFrameDoneQMCallback,
-     (IxQMgrCallbackId) 0,
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    true,			     /**< Enable Q notification at startup */
-    IX_ETH_ACC_TX_FRAME_DONE_ETH_Q_SOURCE, /**< Q Condition to drive callback  */
-    IX_QMGR_Q_WM_LEVEL0,	     /**< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL2,	     /**< Q High water mark - needed by NPE */
-  },
-
-  {  /* Null Termination entry
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  }
-
-};
-
-/**
- *
- * @brief Data structure used to register & initialize the Queues
- *
- * The structure will be filled at run time depending on the NPE
- * image already loaded and the QoS configured in ethDB.
- *
- */
-IX_ETH_ACC_PRIVATE
-IxEthAccQregInfo ixEthAccQmgrRxQueuesInfo[IX_ETHACC_MAX_RX_QUEUES+1]=
-{
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-      (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* Null Termination entry
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  }
-
-};
-
-/* forward declarations */
-IX_ETH_ACC_PRIVATE IxEthAccStatus
-ixEthAccQMgrQueueSetup(IxEthAccQregInfo *qInfoDes);
-
-/**
- * @fn ixEthAccQMgrQueueSetup(void)
- *
- * @brief Setup one queue and its event, and register the callback required
- * by this component to the QMgr
- *
- * @internal
- */
-IX_ETH_ACC_PRIVATE IxEthAccStatus
-ixEthAccQMgrQueueSetup(IxEthAccQregInfo *qInfoDes)
-{
-    /*
-     * Configure each Q.
-     */
-    if ( ixQMgrQConfig( qInfoDes->qName,
-			qInfoDes->qId,
-			qInfoDes->qSize,
-			qInfoDes->qWords) != IX_SUCCESS)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    if ( ixQMgrWatermarkSet( qInfoDes->qId,
-			     qInfoDes->AlmostEmptyThreshold,
-			     qInfoDes->AlmostFullThreshold
-			     ) != IX_SUCCESS)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /*
-     * Set dispatcher priority.
-     */
-    if ( ixQMgrDispatcherPrioritySet( qInfoDes->qId,
-				      IX_ETH_ACC_QM_QUEUE_DISPATCH_PRIORITY)
-	 != IX_SUCCESS)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /*
-     * Register callbacks for each Q.
-     */
-    if ( ixQMgrNotificationCallbackSet(qInfoDes->qId,
-				       qInfoDes->qCallback,
-				       qInfoDes->callbackTag)
-	 != IX_SUCCESS )
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /*
-     * Set notification condition for Q
-     */
-    if (qInfoDes->qNotificationEnableAtStartup == true)
-    {
-	if (   ixQMgrNotificationEnable(qInfoDes->qId,
-					qInfoDes->qConditionSource)
-	       != IX_SUCCESS )
-	{
-	    return IX_ETH_ACC_FAIL;
-	}
-    }
-
-    return(IX_ETH_ACC_SUCCESS);
-}
-
-/**
- * @fn ixEthAccQMgrQueuesConfig(void)
- *
- * @brief Setup all the queues and register all callbacks required
- * by this component to the QMgr
- *
- * The RxFree queues, tx queues, rx queues are configured statically
- *
- * Rx queues configuration is driven by QoS setup.
- * Many Rx queues may be required when QoS is enabled (this depends
- * on IxEthDB setup and the images being downloaded). The configuration
- * of the rxQueues is done in many steps as follows:
- *
- * @li select all Rx queues as configured by ethDB for all ports
- * @li sort the queues by traffic class
- * @li build the priority dependency for all queues
- * @li fill the configuration for all rx queues
- * @li configure all statically configured queues
- * @li configure all dynamically configured queues
- *
- * @param none
- *
- * @return IxEthAccStatus
- *
- * @internal
- */
-IX_ETH_ACC_PUBLIC
-IxEthAccStatus ixEthAccQMgrQueuesConfig(void)
-{
-    struct
-    {
-	int npeCount;
-	UINT32 npeId;
-	IxQMgrQId qId;
-	IxEthDBProperty trafficClass;
-    } rxQueues[IX_ETHACC_MAX_RX_QUEUES];
-
-    UINT32 rxQueue = 0;
-    UINT32 rxQueueCount = 0;
-    IxQMgrQId ixQId =IX_QMGR_MAX_NUM_QUEUES;
-    IxEthDBStatus ixEthDBStatus = IX_ETH_DB_SUCCESS;
-    IxEthDBPortId ixEthDbPortId = 0;
-    IxEthAccPortId ixEthAccPortId = 0;
-    UINT32 ixNpeId = 0;
-    UINT32 ixHighestNpeId = 0;
-    UINT32 sortIterations = 0;
-    IxEthAccStatus ret = IX_ETH_ACC_SUCCESS;
-    IxEthAccQregInfo *qInfoDes = NULL;
-    IxEthDBProperty ixEthDBTrafficClass = IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY;
-    IxEthDBPropertyType ixEthDBPropertyType = IX_ETH_DB_INTEGER_PROPERTY;
-    UINT32 ixEthDBParameter = 0;
-    BOOL completelySorted = false;
-
-    /* Fill the corspondance between ports and queues
-     * This defines the mapping from port to queue Ids.
-     */
-
-    ixEthAccPortData[IX_ETH_PORT_1].ixEthAccRxData.rxFreeQueue
-	= IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q;
-    ixEthAccPortData[IX_ETH_PORT_2].ixEthAccRxData.rxFreeQueue
-	= IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q;
-#ifdef __ixp46X
-    ixEthAccPortData[IX_ETH_PORT_3].ixEthAccRxData.rxFreeQueue
-	= IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q;
-#endif
-    ixEthAccPortData[IX_ETH_PORT_1].ixEthAccTxData.txQueue
-	= IX_ETH_ACC_TX_FRAME_ENET0_Q;
-    ixEthAccPortData[IX_ETH_PORT_2].ixEthAccTxData.txQueue
-	= IX_ETH_ACC_TX_FRAME_ENET1_Q;
-#ifdef __ixp46X
-    ixEthAccPortData[IX_ETH_PORT_3].ixEthAccTxData.txQueue
-	= IX_ETH_ACC_TX_FRAME_ENET2_Q;
-#endif
-    /* Fill the corspondance between ports and NPEs
-     * This defines the mapping from port to npeIds.
-     */
-
-    ixEthAccPortData[IX_ETH_PORT_1].npeId = IX_NPEMH_NPEID_NPEB;
-    ixEthAccPortData[IX_ETH_PORT_2].npeId = IX_NPEMH_NPEID_NPEC;
-#ifdef __ixp46X
-    ixEthAccPortData[IX_ETH_PORT_3].npeId = IX_NPEMH_NPEID_NPEA;
-#endif
-    /* set the default rx scheduling discipline */
-    ixEthAccDataInfo.schDiscipline = FIFO_NO_PRIORITY;
-
-    /*
-     * Queue Selection step:
-     *
-     * The following code selects all the queues and build
-     * a temporary array which contains for each queue
-     * - the queue Id,
-     * - the highest traffic class (in case of many
-     * priorities configured for the same queue on different
-     * ports)
-     * - the number of different Npes which are
-     * configured to write to this queue.
-     *
-     * The output of this loop is a temporary array of RX queues
-     * in any order.
-     *
-     */
-#ifdef CONFIG_IXP425_COMPONENT_ETHDB
-    for (ixEthAccPortId = 0;
-	 (ixEthAccPortId < IX_ETH_ACC_NUMBER_OF_PORTS)
-	     && (ret == IX_ETH_ACC_SUCCESS);
-	 ixEthAccPortId++)
-    {
-	/* map between ethDb and ethAcc port Ids */
-	ixEthDbPortId = (IxEthDBPortId)ixEthAccPortId;
-
-	/* map between npeId and ethAcc port Ids */
-	ixNpeId = IX_ETH_ACC_PORT_TO_NPE_ID(ixEthAccPortId);
-
-	/* Iterate thru the different priorities */
-	for (ixEthDBTrafficClass = IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY;
-	     ixEthDBTrafficClass <= IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY;
-	     ixEthDBTrafficClass++)
-	{
-	    ixEthDBStatus = ixEthDBFeaturePropertyGet(
-	      ixEthDbPortId,
-	      IX_ETH_DB_VLAN_QOS,
-	      ixEthDBTrafficClass,
-	      &ixEthDBPropertyType,
-	      (void *)&ixEthDBParameter);
-
-	    if (ixEthDBStatus == IX_ETH_DB_SUCCESS)
-	    {
-		/* This port and QoS class are mapped to
-		 * a RX queue.
-		 */
-		if (ixEthDBPropertyType == IX_ETH_DB_INTEGER_PROPERTY)
-		{
-		    /* remember the highest npe Id supporting ethernet */
-		    if (ixNpeId > ixHighestNpeId)
-		    {
-			ixHighestNpeId = ixNpeId;
-		    }
-
-		    /* search the queue in the list of queues
-		     * already used by an other port or QoS
-		     */
-		    for (rxQueue = 0;
-			 rxQueue < rxQueueCount;
-			 rxQueue++)
-		    {
-			if (rxQueues[rxQueue].qId == (IxQMgrQId)ixEthDBParameter)
-			{
-			    /* found an existing setup, update the number of ports
-			     * for this queue if the port maps to
-			     * a different NPE.
-			     */
-			    if (rxQueues[rxQueue].npeId != ixNpeId)
-			    {
-				rxQueues[rxQueue].npeCount++;
-				rxQueues[rxQueue].npeId = ixNpeId;
-			    }
-			    /* get the highest traffic class for this queue */
-			    if (rxQueues[rxQueue].trafficClass > ixEthDBTrafficClass)
-			    {
-				rxQueues[rxQueue].trafficClass = ixEthDBTrafficClass;
-			    }
-			    break;
-			}
-		    }
-		    if (rxQueue == rxQueueCount)
-		    {
-			/* new queue not found in the current list,
-			 * add a new entry.
-			 */
-			IX_OSAL_ASSERT(rxQueueCount < IX_ETHACC_MAX_RX_QUEUES);
-			rxQueues[rxQueueCount].qId = ixEthDBParameter;
-			rxQueues[rxQueueCount].npeCount = 1;
-			rxQueues[rxQueueCount].npeId = ixNpeId;
-			rxQueues[rxQueueCount].trafficClass = ixEthDBTrafficClass;
-			rxQueueCount++;
-		    }
-		}
-		else
-		{
-		    /* unexpected property type (not Integer) */
-		    ret = IX_ETH_ACC_FAIL;
-
-                    IX_ETH_ACC_WARNING_LOG("ixEthAccQMgrQueuesConfig: unexpected property type returned by EthDB\n", 0, 0, 0, 0, 0, 0);
-
-		    /* no point to continue to iterate */
-		    break;
-		}
-	    }
-	    else
-	    {
-		/* No Rx queue configured for this port
-		 * and this traffic class. Do nothing.
-		 */
-	    }
-	}
-
-        /* notify EthDB that queue initialization is complete and traffic class allocation is frozen */
-        ixEthDBFeaturePropertySet(ixEthDbPortId,
-            IX_ETH_DB_VLAN_QOS,
-            IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE,
-            NULL /* ignored */);
-    }
-
-#else
-
-    ixNpeId = IX_ETH_ACC_PORT_TO_NPE_ID(ixEthAccPortId);
-    rxQueues[0].qId = 4;
-    rxQueues[0].npeCount = 1;
-    rxQueues[0].npeId = ixNpeId;
-    rxQueues[0].trafficClass = IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY;
-    rxQueueCount++;
-
-#endif
-
-    /* check there is at least 1 rx queue : there is no point
-     * to continue if there is no rx queue configured
-     */
-    if ((rxQueueCount == 0) || (ret == IX_ETH_ACC_FAIL))
-    {
-        IX_ETH_ACC_WARNING_LOG("ixEthAccQMgrQueuesConfig: no queues configured, bailing out\n", 0, 0, 0, 0, 0, 0);
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    /* Queue sort step:
-     *
-     * Re-order the array of queues by decreasing traffic class
-     * using a bubble sort. (trafficClass 0 is the lowest
-     * priority traffic, trafficClass 7 is the highest priority traffic)
-     *
-     * Primary sort order is traffic class
-     * Secondary sort order is npeId
-     *
-     * Note that a bubble sort algorithm is not very efficient when
-     * the number of queues grows . However, this is not a very bad choice
-     * considering the very small number of entries to sort. Also, bubble
-     * sort is extremely fast when the list is already sorted.
-     *
-     * The output of this loop is a sorted array of queues.
-     *
-     */
-    sortIterations = 0;
-    do
-    {
-	sortIterations++;
-	completelySorted = true;
-	for (rxQueue = 0;
-	     rxQueue < rxQueueCount - sortIterations;
-	     rxQueue++)
-	{
-	    /* compare adjacent elements */
-	    if ((rxQueues[rxQueue].trafficClass <
-		rxQueues[rxQueue+1].trafficClass)
-		|| ((rxQueues[rxQueue].trafficClass ==
-		     rxQueues[rxQueue+1].trafficClass)
-		    &&(rxQueues[rxQueue].npeId <
-		       rxQueues[rxQueue+1].npeId)))
-	    {
-		/* swap adjacent elements */
-		int npeCount = rxQueues[rxQueue].npeCount;
-		UINT32 npeId = rxQueues[rxQueue].npeId;
-		IxQMgrQId qId = rxQueues[rxQueue].qId;
-		IxEthDBProperty trafficClass = rxQueues[rxQueue].trafficClass;
-		rxQueues[rxQueue].npeCount = rxQueues[rxQueue+1].npeCount;
-		rxQueues[rxQueue].npeId = rxQueues[rxQueue+1].npeId;
-		rxQueues[rxQueue].qId = rxQueues[rxQueue+1].qId;
-		rxQueues[rxQueue].trafficClass = rxQueues[rxQueue+1].trafficClass;
-		rxQueues[rxQueue+1].npeCount = npeCount;
-		rxQueues[rxQueue+1].npeId = npeId;
-		rxQueues[rxQueue+1].qId = qId;
-		rxQueues[rxQueue+1].trafficClass = trafficClass;
-		completelySorted = false;
-	    }
-	}
-    }
-    while (!completelySorted);
-
-    /* Queue traffic class list:
-     *
-     * Fill an array of rx queues linked by ascending traffic classes.
-     *
-     * If the queues are configured as follows
-     *   qId 6 -> traffic class 0 (lowest)
-     *   qId 7 -> traffic class 0
-     *   qId 8 -> traffic class 6
-     *   qId 12 -> traffic class 7 (highest)
-     *
-     * Then the output of this loop will be
-     *
-     * higherPriorityQueue[6] = 8
-     * higherPriorityQueue[7] = 8
-     * higherPriorityQueue[8] = 12
-     * higherPriorityQueue[12] = Invalid queueId
-     * higherPriorityQueue[...] = Invalid queueId
-     *
-     * Note that this queue ordering does not handle all possibilities
-     * that could result from different rules associated with different
-     * ports, and inconsistencies in the rules. In all cases, the
-     * output of this  algorithm is a simple linked list of queues,
-     * without closed circuit.
-
-     * This list is implemented as an array with invalid values initialized
-     * with an "invalid" queue id which is the maximum number of queues.
-     *
-     */
-
-    /*
-     * Initialise the rx queue list.
-     */
-    for (rxQueue = 0; rxQueue < IX_QMGR_MAX_NUM_QUEUES; rxQueue++)
-    {
-	ixEthAccDataInfo.higherPriorityQueue[rxQueue] = IX_QMGR_MAX_NUM_QUEUES;
-    }
-
-    /* build the linked list for this NPE.
-     */
-    for (ixNpeId = 0;
-	 ixNpeId <= ixHighestNpeId;
-	 ixNpeId++)
-    {
-	/* iterate thru the sorted list of queues
-	 */
-	ixQId = IX_QMGR_MAX_NUM_QUEUES;
-	for (rxQueue = 0;
-	     rxQueue < rxQueueCount;
-	     rxQueue++)
-	{
-	    if (rxQueues[rxQueue].npeId == ixNpeId)
-	    {
-		ixEthAccDataInfo.higherPriorityQueue[rxQueues[rxQueue].qId] = ixQId;
-		/* iterate thru queues with the same traffic class
-		 * than the current queue. (queues are ordered by descending
-		 * traffic classes and npeIds).
-		 */
-		while ((rxQueue < rxQueueCount - 1)
-		       && (rxQueues[rxQueue].trafficClass
-			   == rxQueues[rxQueue+1].trafficClass)
-		       && (ixNpeId == rxQueues[rxQueue].npeId))
-		{
-		    rxQueue++;
-		    ixEthAccDataInfo.higherPriorityQueue[rxQueues[rxQueue].qId] = ixQId;
-		}
-		ixQId = rxQueues[rxQueue].qId;
-	    }
-	}
-    }
-
-    /* point on the first dynamic queue description */
-    qInfoDes = ixEthAccQmgrRxQueuesInfo;
-
-    /* update the list of queues with the rx queues */
-    for (rxQueue = 0;
-	 (rxQueue < rxQueueCount) && (ret == IX_ETH_ACC_SUCCESS);
-	 rxQueue++)
-    {
-	/* Don't utilize more than IX_ETHACC_MAX_LARGE_RX_QUEUES queues
-	 * with the full 128 entries.  For the lower priority queues, use
-	 * a smaller number of entries.  This ensures queue resources
-	 * remain available for other components.
-	 */
-	if( (rxQueueCount > IX_ETHACC_MAX_LARGE_RX_QUEUES) &&
-	    (rxQueue < rxQueueCount - IX_ETHACC_MAX_LARGE_RX_QUEUES) )
-	{
-	    /* add the small RX Queue setup template to the list of queues */
-	    memcpy(qInfoDes, &ixEthAccQmgrRxSmallTemplate, sizeof(*qInfoDes));
-	} else {
-	    /* add the default RX Queue setup template to the list of queues */
-	    memcpy(qInfoDes, &ixEthAccQmgrRxDefaultTemplate, sizeof(*qInfoDes));
-	}
-
-	/* setup the RxQueue ID */
-	qInfoDes->qId = rxQueues[rxQueue].qId;
-
-	/* setup the RxQueue watermark level
-	 *
-	 * Each queue can be filled by many NPEs. To avoid the
-	 * NPEs to write to a full queue, need to set the
-	 * high watermark level for nearly full condition.
-	 * (the high watermark level are a power of 2
-	 * starting from the top of the queue)
-	 *
-	 * Number of     watermark
-         *   ports        level
-         *    1             0
-	 *    2             1
-	 *    3             2
-	 *    4             4
-	 *    5             4
-	 *    6             8
-	 *    n          approx. 2**ceil(log2(n))
-	 */
-	if (rxQueues[rxQueue].npeCount == 1)
-	{
-	    qInfoDes->AlmostFullThreshold = IX_QMGR_Q_WM_LEVEL0;
-	}
-	else if (rxQueues[rxQueue].npeCount == 2)
-	{
-	    qInfoDes->AlmostFullThreshold = IX_QMGR_Q_WM_LEVEL1;
-	}
-	else if (rxQueues[rxQueue].npeCount == 3)
-	{
-	    qInfoDes->AlmostFullThreshold = IX_QMGR_Q_WM_LEVEL2;
-	}
-	else
-	{
-	    /* reach the maximum number for CSR 2.0 */
-            IX_ETH_ACC_WARNING_LOG("ixEthAccQMgrQueuesConfig: maximum number of NPEs per queue reached, bailing out\n", 0, 0, 0, 0, 0, 0);
-	    ret = IX_ETH_ACC_FAIL;
-	    break;
-	}
-
-	/* move to next queue entry */
-	++qInfoDes;
-    }
-
-    /* configure the static list (RxFree, Tx and TxDone queues) */
-    for (qInfoDes = ixEthAccQmgrStaticInfo;
-	 (qInfoDes->qCallback != (IxQMgrCallback) NULL )
-	     && (ret == IX_ETH_ACC_SUCCESS);
-	 ++qInfoDes)
-    {
-	ret = ixEthAccQMgrQueueSetup(qInfoDes);
-    }
-
-    /* configure the dynamic list (Rx queues) */
-    for (qInfoDes = ixEthAccQmgrRxQueuesInfo;
-	 (qInfoDes->qCallback != (IxQMgrCallback) NULL )
-	     && (ret == IX_ETH_ACC_SUCCESS);
-	 ++qInfoDes)
-    {
-	ret = ixEthAccQMgrQueueSetup(qInfoDes);
-    }
-
-    return(ret);
-}
-
-/**
- * @fn ixEthAccQMgrRxQEntryGet(UINT32 *rxQueueEntries)
- *
- * @brief Add and return the total number of entries in all Rx queues
- *
- * @param UINT32 rxQueueEntries[in] number of entries in all queues
- *
- * @return void
- *
- * @note Rx queues configuration is driven by Qos Setup. There is a
- * variable number of rx queues which are set at initialisation.
- *
- * @internal
- */
-IX_ETH_ACC_PUBLIC
-void ixEthAccQMgrRxQEntryGet(UINT32 *numRxQueueEntries)
-{
-    UINT32 rxQueueLevel;
-    IxEthAccQregInfo *qInfoDes;;
-
-    *numRxQueueEntries = 0;
-
-    /* iterate thru rx queues */
-    for (qInfoDes = ixEthAccQmgrRxQueuesInfo;
-	 qInfoDes->qCallback != (IxQMgrCallback)NULL;
-	 ++qInfoDes)
-    {
-	/* retrieve the rx queue level */
-	rxQueueLevel = 0;
-	ixQMgrQNumEntriesGet(qInfoDes->qId, &rxQueueLevel);
-	(*numRxQueueEntries) += rxQueueLevel;
-    }
-}
-
-/**
- * @fn ixEthAccQMgrRxCallbacksRegister(IxQMgrCallback ixQMgrCallback)
- *
- * @brief Change the callback registered to all rx queues.
- *
- * @param IxQMgrCallback ixQMgrCallback[in] QMgr callback to register
- *
- * @return IxEthAccStatus
- *
- * @note The user may decide to use different Rx mechanisms
- * (e.g. receive many frames at the same time , or receive
- *  one frame at a time, depending on the overall application
- *  performances). A different QMgr callback is registered. This
- *  way, there is no excessive pointer checks in the datapath.
- *
- * @internal
- */
-IX_ETH_ACC_PUBLIC
-IxEthAccStatus ixEthAccQMgrRxCallbacksRegister(IxQMgrCallback ixQMgrCallback)
-{
-    IxEthAccQregInfo *qInfoDes;
-    IxEthAccStatus ret = IX_ETH_ACC_SUCCESS;
-
-    /* parameter check */
-    if (NULL == ixQMgrCallback)
-    {
-	ret = IX_ETH_ACC_FAIL;
-    }
-
-    /* iterate thru rx queues */
-    for (qInfoDes = ixEthAccQmgrRxQueuesInfo;
-	 (qInfoDes->qCallback != (IxQMgrCallback) NULL )
-	     && (ret == IX_ETH_ACC_SUCCESS);
-	 ++qInfoDes)
-    {
-	/* register the rx callback for all queues */
-	if (ixQMgrNotificationCallbackSet(qInfoDes->qId,
-					     ixQMgrCallback,
-					     qInfoDes->callbackTag
-					     ) != IX_SUCCESS)
-	{
-	    ret = IX_ETH_ACC_FAIL;
-	}
-    }
-    return(ret);
-}
-
-/**
- * @fn ixEthAccSingleEthNpeCheck(IxEthAccPortId portId)
- *
- * @brief Check the npe exists for this port
- *
- * @param IxEthAccPortId portId[in] port
- *
- * @return IxEthAccStatus
- *
- * @internal
- */
-IX_ETH_ACC_PUBLIC
-IxEthAccStatus ixEthAccSingleEthNpeCheck(IxEthAccPortId portId)
-{
-
-    /* If not IXP42X A0 stepping, proceed to check for existence of coprocessors */
-    if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 !=
-        (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK))
-        || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ()))
-      {
-            if ((IX_ETH_PORT_1 == portId) &&
-                (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) ==
-                 IX_FEATURE_CTRL_COMPONENT_ENABLED))
-            {
-                return IX_ETH_ACC_SUCCESS;
-            }
-
-            if ((IX_ETH_PORT_2 == portId) &&
-                (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) ==
-                 IX_FEATURE_CTRL_COMPONENT_ENABLED))
-            {
-                return IX_ETH_ACC_SUCCESS;
-            }
-
-            if ((IX_ETH_PORT_3 == portId) &&
-                (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA_ETH) ==
-                 IX_FEATURE_CTRL_COMPONENT_ENABLED))
-            {
-                return IX_ETH_ACC_SUCCESS;
-            }
-
-            return IX_ETH_ACC_FAIL;
-      }
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-/**
- * @fn ixEthAccStatsShow(void)
- *
- * @brief Displays all EthAcc stats
- *
- * @return void
- *
- */
-void ixEthAccStatsShow(IxEthAccPortId portId)
-{
-    ixEthAccMdioShow();
-
-    printf("\nPort %u\nUnicast MAC : ", portId);
-    ixEthAccPortUnicastAddressShow(portId);
-    ixEthAccPortMulticastAddressShow(portId);
-    printf("\n");
-
-    ixEthAccDataPlaneShow();
-}
-
-
-