Merge git://www.denx.de/git/u-boot

Conflicts:

	board/tqm5200/tqm5200.c

1 files changed, 817 insertions, 0 deletions

diff --git a/drivers/net/inca-ip_sw.c b/drivers/net/inca-ip_sw.c
new file mode 100644
index 0000000..e4aaed6
--- /dev/null
+++ b/drivers/net/inca-ip_sw.c
@@ -0,0 +1,817 @@
+/*
+ * INCA-IP internal switch ethernet driver.
+ *
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+
+#if defined(CONFIG_CMD_NET) \
+	&& defined(CONFIG_NET_MULTI) && defined(CONFIG_INCA_IP_SWITCH)
+
+#include <malloc.h>
+#include <net.h>
+#include <asm/inca-ip.h>
+#include <asm/addrspace.h>
+
+
+#define NUM_RX_DESC	PKTBUFSRX
+#define NUM_TX_DESC	3
+#define TOUT_LOOP	1000000
+
+
+#define DELAY	udelay(10000)
+  /* Sometimes the store word instruction hangs while writing to one
+   * of the Switch registers. Moving the instruction into a separate
+   * function somehow makes the problem go away.
+   */
+static void SWORD(volatile u32 * reg, u32 value)
+{
+	*reg = value;
+}
+
+#define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value;
+#define DMA_READ_REG(reg, value)    value = (u32)*((volatile u32*)reg)
+#define SW_WRITE_REG(reg, value)   \
+	SWORD(reg, value);\
+	DELAY;\
+	SWORD(reg, value);
+
+#define SW_READ_REG(reg, value)	   \
+	value = (u32)*((volatile u32*)reg);\
+	DELAY;\
+	value = (u32)*((volatile u32*)reg);
+
+#define INCA_DMA_TX_POLLING_TIME	0x07
+#define INCA_DMA_RX_POLLING_TIME	0x07
+
+#define INCA_DMA_TX_HOLD		0x80000000
+#define INCA_DMA_TX_EOP			0x40000000
+#define INCA_DMA_TX_SOP			0x20000000
+#define INCA_DMA_TX_ICPT		0x10000000
+#define INCA_DMA_TX_IEOP		0x08000000
+
+#define INCA_DMA_RX_C			0x80000000
+#define INCA_DMA_RX_SOP			0x40000000
+#define INCA_DMA_RX_EOP			0x20000000
+
+#define INCA_SWITCH_PHY_SPEED_10H	0x1
+#define INCA_SWITCH_PHY_SPEED_10F	0x5
+#define INCA_SWITCH_PHY_SPEED_100H	0x2
+#define INCA_SWITCH_PHY_SPEED_100F	0x6
+
+/************************ Auto MDIX settings ************************/
+#define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR		INCA_IP_Ports_P1_DIR
+#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL	INCA_IP_Ports_P1_ALTSEL
+#define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT		INCA_IP_Ports_P1_OUT
+#define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX	16
+
+#define WAIT_SIGNAL_RETRIES			100
+#define WAIT_LINK_RETRIES			100
+#define LINK_RETRY_DELAY			2000  /* ms */
+/********************************************************************/
+
+typedef struct
+{
+	union {
+		struct {
+			volatile u32 HOLD		:1;
+			volatile u32 ICpt		:1;
+			volatile u32 IEop		:1;
+			volatile u32 offset		:3;
+			volatile u32 reserved0		:4;
+			volatile u32 NFB		:22;
+		}field;
+
+		volatile u32 word;
+	}params;
+
+	volatile u32 nextRxDescPtr;
+
+	volatile u32 RxDataPtr;
+
+	union {
+		struct {
+			volatile u32 C			:1;
+			volatile u32 Sop		:1;
+			volatile u32 Eop		:1;
+			volatile u32 reserved3		:12;
+			volatile u32 NBT		:17;
+		}field;
+
+		volatile u32 word;
+	}status;
+
+} inca_rx_descriptor_t;
+
+
+typedef struct
+{
+	union {
+		struct {
+			volatile u32 HOLD		:1;
+			volatile u32 Eop		:1;
+			volatile u32 Sop		:1;
+			volatile u32 ICpt		:1;
+			volatile u32 IEop		:1;
+			volatile u32 reserved0		:5;
+			volatile u32 NBA		:22;
+		}field;
+
+		volatile u32 word;
+	}params;
+
+	volatile u32 nextTxDescPtr;
+
+	volatile u32 TxDataPtr;
+
+	volatile u32 C			:1;
+	volatile u32 reserved3		:31;
+
+} inca_tx_descriptor_t;
+
+
+static inca_rx_descriptor_t rx_ring[NUM_RX_DESC] __attribute__ ((aligned(16)));
+static inca_tx_descriptor_t tx_ring[NUM_TX_DESC] __attribute__ ((aligned(16)));
+
+static int tx_new, rx_new, tx_hold, rx_hold;
+static int tx_old_hold = -1;
+static int initialized	= 0;
+
+
+static int inca_switch_init(struct eth_device *dev, bd_t * bis);
+static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length);
+static int inca_switch_recv(struct eth_device *dev);
+static void inca_switch_halt(struct eth_device *dev);
+static void inca_init_switch_chip(void);
+static void inca_dma_init(void);
+static int inca_amdix(void);
+
+
+int inca_switch_initialize(bd_t * bis)
+{
+	struct eth_device *dev;
+
+#if 0
+	printf("Entered inca_switch_initialize()\n");
+#endif
+
+	if (!(dev = (struct eth_device *) malloc (sizeof *dev))) {
+		printf("Failed to allocate memory\n");
+		return 0;
+	}
+	memset(dev, 0, sizeof(*dev));
+
+	inca_dma_init();
+
+	inca_init_switch_chip();
+
+#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
+	inca_amdix();
+#endif
+
+	sprintf(dev->name, "INCA-IP Switch");
+	dev->init = inca_switch_init;
+	dev->halt = inca_switch_halt;
+	dev->send = inca_switch_send;
+	dev->recv = inca_switch_recv;
+
+	eth_register(dev);
+
+#if 0
+	printf("Leaving inca_switch_initialize()\n");
+#endif
+
+	return 1;
+}
+
+
+static int inca_switch_init(struct eth_device *dev, bd_t * bis)
+{
+	int i;
+	u32 v, regValue;
+	u16 wTmp;
+
+#if 0
+	printf("Entering inca_switch_init()\n");
+#endif
+
+	/* Set MAC address.
+	 */
+	wTmp = (u16)dev->enetaddr[0];
+	regValue = (wTmp << 8) | dev->enetaddr[1];
+
+	SW_WRITE_REG(INCA_IP_Switch_PMAC_SA1, regValue);
+
+	wTmp = (u16)dev->enetaddr[2];
+	regValue = (wTmp << 8) | dev->enetaddr[3];
+	regValue = regValue << 16;
+	wTmp = (u16)dev->enetaddr[4];
+	regValue |= (wTmp<<8) | dev->enetaddr[5];
+
+	SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue);
+
+	/* Initialize the descriptor rings.
+	 */
+	for (i = 0; i < NUM_RX_DESC; i++) {
+		inca_rx_descriptor_t * rx_desc = KSEG1ADDR(&rx_ring[i]);
+		memset(rx_desc, 0, sizeof(rx_ring[i]));
+
+		/* Set maximum size of receive buffer.
+		 */
+		rx_desc->params.field.NFB = PKTSIZE_ALIGN;
+
+		/* Set the offset of the receive buffer. Zero means
+		 * that the offset mechanism is not used.
+		 */
+		rx_desc->params.field.offset = 0;
+
+		/* Check if it is the last descriptor.
+		 */
+		if (i == (NUM_RX_DESC - 1)) {
+			/* Let the last descriptor point to the first
+			 * one.
+			 */
+			rx_desc->nextRxDescPtr = KSEG1ADDR((u32)rx_ring);
+		} else {
+			/* Set the address of the next descriptor.
+			 */
+			rx_desc->nextRxDescPtr = (u32)KSEG1ADDR(&rx_ring[i+1]);
+		}
+
+		rx_desc->RxDataPtr = (u32)KSEG1ADDR(NetRxPackets[i]);
+	}
+
+#if 0
+	printf("rx_ring = 0x%08X 0x%08X\n", (u32)rx_ring, (u32)&rx_ring[0]);
+	printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]);
+#endif
+
+	for (i = 0; i < NUM_TX_DESC; i++) {
+		inca_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_ring[i]);
+
+		memset(tx_desc, 0, sizeof(tx_ring[i]));
+
+		tx_desc->params.word	   = 0;
+		tx_desc->params.field.HOLD = 1;
+		tx_desc->C		   = 1;
+
+			/* Check if it is the last descriptor.
+			 */
+		if (i == (NUM_TX_DESC - 1)) {
+				/* Let the last descriptor point to the
+				 * first one.
+				 */
+			tx_desc->nextTxDescPtr = KSEG1ADDR((u32)tx_ring);
+		} else {
+				/* Set the address of the next descriptor.
+				 */
+			tx_desc->nextTxDescPtr = (u32)KSEG1ADDR(&tx_ring[i+1]);
+		}
+	}
+
+	/* Initialize RxDMA.
+	 */
+	DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v);
+#if 0
+	printf("RX status = 0x%08X\n", v);
+#endif
+
+	/* Writing to the FRDA of CHANNEL.
+	 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring);
+
+	/* Writing to the COMMAND REG.
+	 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_INIT);
+
+	/* Initialize TxDMA.
+	 */
+	DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v);
+#if 0
+	printf("TX status = 0x%08X\n", v);
+#endif
+
+	/* Writing to the FRDA of CHANNEL.
+	 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring);
+
+	tx_new = rx_new = 0;
+
+	tx_hold = NUM_TX_DESC - 1;
+	rx_hold = NUM_RX_DESC - 1;
+
+#if 0
+	rx_ring[rx_hold].params.field.HOLD = 1;
+#endif
+	/* enable spanning tree forwarding, enable the CPU port */
+	/* ST_PT:
+	 *	CPS (CPU port status)	0x3 (forwarding)
+	 *	LPS (LAN port status)	0x3 (forwarding)
+	 *	PPS (PC port status)	0x3 (forwarding)
+	 */
+	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f);
+
+#if 0
+	printf("Leaving inca_switch_init()\n");
+#endif
+
+	return 0;
+}
+
+
+static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length)
+{
+	int		       i;
+	int		       res	= -1;
+	u32		       command;
+	u32		       regValue;
+	inca_tx_descriptor_t * tx_desc	= KSEG1ADDR(&tx_ring[tx_new]);
+
+#if 0
+	printf("Entered inca_switch_send()\n");
+#endif
+
+	if (length <= 0) {
+		printf ("%s: bad packet size: %d\n", dev->name, length);
+		goto Done;
+	}
+
+	for(i = 0; tx_desc->C == 0; i++) {
+		if (i >= TOUT_LOOP) {
+			printf("%s: tx error buffer not ready\n", dev->name);
+			goto Done;
+		}
+	}
+
+	if (tx_old_hold >= 0) {
+		KSEG1ADDR(&tx_ring[tx_old_hold])->params.field.HOLD = 1;
+	}
+	tx_old_hold = tx_hold;
+
+	tx_desc->params.word =
+			(INCA_DMA_TX_SOP | INCA_DMA_TX_EOP | INCA_DMA_TX_HOLD);
+
+	tx_desc->C = 0;
+	tx_desc->TxDataPtr = (u32)packet;
+	tx_desc->params.field.NBA = length;
+
+	KSEG1ADDR(&tx_ring[tx_hold])->params.field.HOLD = 0;
+
+	tx_hold = tx_new;
+	tx_new	= (tx_new + 1) % NUM_TX_DESC;
+
+
+	if (! initialized) {
+		command = INCA_IP_DMA_DMA_TXCCR0_INIT;
+		initialized = 1;
+	} else {
+		command = INCA_IP_DMA_DMA_TXCCR0_HR;
+	}
+
+	DMA_READ_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
+	regValue |= command;
+#if 0
+	printf("regValue = 0x%x\n", regValue);
+#endif
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
+
+#if 1
+	for(i = 0; KSEG1ADDR(&tx_ring[tx_hold])->C == 0; i++) {
+		if (i >= TOUT_LOOP) {
+			printf("%s: tx buffer not ready\n", dev->name);
+			goto Done;
+		}
+	}
+#endif
+	res = length;
+Done:
+#if 0
+	printf("Leaving inca_switch_send()\n");
+#endif
+	return res;
+}
+
+
+static int inca_switch_recv(struct eth_device *dev)
+{
+	int		       length  = 0;
+	inca_rx_descriptor_t * rx_desc;
+
+#if 0
+	printf("Entered inca_switch_recv()\n");
+#endif
+
+	for (;;) {
+		rx_desc = KSEG1ADDR(&rx_ring[rx_new]);
+
+		if (rx_desc->status.field.C == 0) {
+			break;
+		}
+
+#if 0
+		rx_ring[rx_new].params.field.HOLD = 1;
+#endif
+
+		if (! rx_desc->status.field.Eop) {
+			printf("Partly received packet!!!\n");
+			break;
+		}
+
+		length = rx_desc->status.field.NBT;
+		rx_desc->status.word &=
+			 ~(INCA_DMA_RX_EOP | INCA_DMA_RX_SOP | INCA_DMA_RX_C);
+#if 0
+{
+  int i;
+  for (i=0;i<length - 4;i++) {
+    if (i % 16 == 0) printf("\n%04x: ", i);
+    printf("%02X ", NetRxPackets[rx_new][i]);
+  }
+  printf("\n");
+}
+#endif
+
+		if (length) {
+#if 0
+			printf("Received %d bytes\n", length);
+#endif
+			NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_new]), length - 4);
+		} else {
+#if 1
+			printf("Zero length!!!\n");
+#endif
+		}
+
+
+		KSEG1ADDR(&rx_ring[rx_hold])->params.field.HOLD = 0;
+
+		rx_hold = rx_new;
+
+		rx_new = (rx_new + 1) % NUM_RX_DESC;
+	}
+
+#if 0
+	printf("Leaving inca_switch_recv()\n");
+#endif
+
+	return length;
+}
+
+
+static void inca_switch_halt(struct eth_device *dev)
+{
+#if 0
+	printf("Entered inca_switch_halt()\n");
+#endif
+
+#if 1
+	initialized = 0;
+#endif
+#if 1
+	/* Disable forwarding to the CPU port.
+	 */
+	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
+
+	/* Close RxDMA channel.
+	 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
+
+	/* Close TxDMA channel.
+	 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF);
+
+
+#endif
+#if 0
+	printf("Leaving inca_switch_halt()\n");
+#endif
+}
+
+
+static void inca_init_switch_chip(void)
+{
+	u32 regValue;
+
+	/* To workaround a problem with collision counter
+	 * (see Errata sheet).
+	 */
+	SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001);
+	SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001);
+
+#if 1
+	/* init MDIO configuration:
+	 *	MDS (Poll speed):	0x01 (4ms)
+	 *	PHY_LAN_ADDR:		0x06
+	 *	PHY_PC_ADDR:		0x05
+	 *	UEP (Use External PHY): 0x00 (Internal PHY is used)
+	 *	PS (Port Select):	0x00 (PT/UMM for LAN)
+	 *	PT (PHY Test):		0x00 (no test mode)
+	 *	UMM (Use MDIO Mode):	0x00 (state machine is disabled)
+	 */
+	SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50);
+
+	/* init PHY:
+	 *	SL (Auto Neg. Speed for LAN)
+	 *	SP (Auto Neg. Speed for PC)
+	 *	LL (Link Status for LAN)
+	 *	LP (Link Status for PC)
+	 *	DL (Duplex Status for LAN)
+	 *	DP (Duplex Status for PC)
+	 *	PL (Auto Neg. Pause Status for LAN)
+	 *	PP (Auto Neg. Pause Status for PC)
+	 */
+	SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff);
+
+	/* MDIO_ACC:
+	 *	RA (Request/Ack)  0x01 (Request)
+	 *	RW (Read/Write)	  0x01 (Write)
+	 *	PHY_ADDR	  0x05 (PC)
+	 *	REG_ADDR	  0x00 (PHY_BCR: basic control register)
+	 *	PHY_DATA	  0x8000
+	 *		      Reset		      - software reset
+	 *		      LB (loop back)	      - normal
+	 *		      SS (speed select)	      - 10 Mbit/s
+	 *		      ANE (auto neg. enable)  - enable
+	 *		      PD (power down)	      - normal
+	 *		      ISO (isolate)	      - normal
+	 *		      RAN (restart auto neg.) - normal
+	 *		      DM (duplex mode)	      - half duplex
+	 *		      CT (collision test)     - enable
+	 */
+	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a09000);
+
+	/* MDIO_ACC:
+	 *	RA (Request/Ack)  0x01 (Request)
+	 *	RW (Read/Write)	  0x01 (Write)
+	 *	PHY_ADDR	  0x06 (LAN)
+	 *	REG_ADDR	  0x00 (PHY_BCR: basic control register)
+	 *	PHY_DATA	  0x8000
+	 *		      Reset		      - software reset
+	 *		      LB (loop back)	      - normal
+	 *		      SS (speed select)	      - 10 Mbit/s
+	 *		      ANE (auto neg. enable)  - enable
+	 *		      PD (power down)	      - normal
+	 *		      ISO (isolate)	      - normal
+	 *		      RAN (restart auto neg.) - normal
+	 *		      DM (duplex mode)	      - half duplex
+	 *		      CT (collision test)     - enable
+	 */
+	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000);
+
+#endif
+
+	/* Make sure the CPU port is disabled for now. We
+	 * don't want packets to get stacked for us until
+	 * we enable DMA and are prepared to receive them.
+	 */
+	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
+
+	SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue);
+
+	/* CRC GEN is enabled.
+	 */
+	regValue |= 0x00000200;
+	SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue);
+
+	/* ADD TAG is disabled.
+	 */
+	SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
+	regValue &= ~0x00000002;
+	SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
+}
+
+
+static void inca_dma_init(void)
+{
+	/* Switch off all DMA channels.
+	 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF);
+
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF);
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF);
+
+	/* Setup TX channel polling time.
+	 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME);
+
+	/* Setup RX channel polling time.
+	 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME);
+
+	/* ERRATA: write reset value into the DMA RX IMR register.
+	 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF);
+
+	/* Just in case: disable all transmit interrupts also.
+	 */
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF);
+
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF);
+	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF);
+}
+
+#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
+static int inca_amdix(void)
+{
+	u32 phyReg1 = 0;
+	u32 phyReg4 = 0;
+	u32 phyReg5 = 0;
+	u32 phyReg6 = 0;
+	u32 phyReg31 = 0;
+	u32 regEphy = 0;
+	int mdi_flag;
+	int retries;
+
+	/* Setup GPIO pins.
+	 */
+	*INCA_IP_AUTO_MDIX_LAN_PORTS_DIR    |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+	*INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+
+#if 0
+	/* Wait for signal.
+	 */
+	retries = WAIT_SIGNAL_RETRIES;
+	while (--retries) {
+		SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+				(0x1 << 31) |	/* RA		*/
+				(0x0 << 30) |	/* Read		*/
+				(0x6 << 21) |	/* LAN		*/
+				(17  << 16));	/* PHY_MCSR	*/
+		do {
+			SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
+		} while (phyReg1 & (1 << 31));
+
+		if (phyReg1 & (1 << 1)) {
+			/* Signal detected */
+			break;
+		}
+	}
+
+	if (!retries)
+		goto Fail;
+#endif
+
+	/* Set MDI mode.
+	 */
+	*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+	mdi_flag = 1;
+
+	/* Wait for link.
+	 */
+	retries = WAIT_LINK_RETRIES;
+	while (--retries) {
+		udelay(LINK_RETRY_DELAY * 1000);
+		SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+				(0x1 << 31) |	/* RA		*/
+				(0x0 << 30) |	/* Read		*/
+				(0x6 << 21) |	/* LAN		*/
+				(1   << 16));	/* PHY_BSR	*/
+		do {
+			SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
+		} while (phyReg1 & (1 << 31));
+
+		if (phyReg1 & (1 << 2)) {
+			/* Link is up */
+			break;
+		} else if (mdi_flag) {
+			/* Set MDIX mode */
+			*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+			mdi_flag = 0;
+		} else {
+			/* Set MDI mode */
+			*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+			mdi_flag = 1;
+		}
+	}
+
+	if (!retries) {
+		goto Fail;
+	} else {
+		SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+				(0x1 << 31) |	/* RA		*/
+				(0x0 << 30) |	/* Read		*/
+				(0x6 << 21) |	/* LAN		*/
+				(1   << 16));	/* PHY_BSR	*/
+		do {
+			SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
+		} while (phyReg1 & (1 << 31));
+
+		/* Auto-negotiation / Parallel detection complete
+		 */
+		if (phyReg1 & (1 << 5)) {
+			SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+				(0x1 << 31) |	/* RA		*/
+				(0x0 << 30) |	/* Read		*/
+				(0x6 << 21) |	/* LAN		*/
+				(31  << 16));	/* PHY_SCSR	*/
+			do {
+				SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg31);
+			} while (phyReg31 & (1 << 31));
+
+			switch ((phyReg31 >> 2) & 0x7) {
+			case INCA_SWITCH_PHY_SPEED_10H:
+				/* 10Base-T Half-duplex */
+				regEphy = 0;
+				break;
+			case INCA_SWITCH_PHY_SPEED_10F:
+				/* 10Base-T Full-duplex */
+				regEphy = INCA_IP_Switch_EPHY_DL;
+				break;
+			case INCA_SWITCH_PHY_SPEED_100H:
+				/* 100Base-TX Half-duplex */
+				regEphy = INCA_IP_Switch_EPHY_SL;
+				break;
+			case INCA_SWITCH_PHY_SPEED_100F:
+				/* 100Base-TX Full-duplex */
+				regEphy = INCA_IP_Switch_EPHY_SL | INCA_IP_Switch_EPHY_DL;
+				break;
+			}
+
+			/* In case of Auto-negotiation,
+			 * update the negotiated PAUSE support status
+			 */
+			if (phyReg1 & (1 << 3)) {
+				SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+					(0x1 << 31) |	/* RA		*/
+					(0x0 << 30) |	/* Read		*/
+					(0x6 << 21) |	/* LAN		*/
+					(6   << 16));	/* PHY_ANER	*/
+				do {
+					SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6);
+				} while (phyReg6 & (1 << 31));
+
+				/* We are Autoneg-able.
+				 * Is Link partner also able to autoneg?
+				 */
+				if (phyReg6 & (1 << 0)) {
+					SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+						(0x1 << 31) |	/* RA		*/
+						(0x0 << 30) |	/* Read		*/
+						(0x6 << 21) |	/* LAN		*/
+						(4   << 16));	/* PHY_ANAR	*/
+					do {
+						SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4);
+					} while (phyReg4 & (1 << 31));
+
+					/* We advertise PAUSE capab.
+					 * Does link partner also advertise it?
+					 */
+					if (phyReg4 & (1 << 10)) {
+						SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+							(0x1 << 31) |	/* RA		*/
+							(0x0 << 30) |	/* Read		*/
+							(0x6 << 21) |	/* LAN		*/
+							(5   << 16));	/* PHY_ANLPAR	*/
+						do {
+							SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5);
+						} while (phyReg5 & (1 << 31));
+
+						/* Link partner is PAUSE capab.
+						 */
+						if (phyReg5 & (1 << 10)) {
+							regEphy |= INCA_IP_Switch_EPHY_PL;
+						}
+					}
+				}
+
+			}
+
+			/* Link is up */
+			regEphy |= INCA_IP_Switch_EPHY_LL;
+
+			SW_WRITE_REG(INCA_IP_Switch_EPHY, regEphy);
+		}
+	}
+
+	return 0;
+
+Fail:
+	printf("No Link on LAN port\n");
+	return -1;
+}
+#endif /* CONFIG_INCA_IP_SWITCH_AMDIX */
+
+#endif