summaryrefslogtreecommitdiff
path: root/drivers/net/enc28j60.c
diff options
context:
space:
mode:
authorAndy Fleming <afleming@freescale.com>2011-03-22 22:49:13 -0500
committerAndy Fleming <afleming@freescale.com>2011-04-20 13:44:46 -0500
commit09c04c20962afd25ce5797e263906f84de5b1f4c (patch)
treececd7d928b0013c746face5ccad4d787222cb242 /drivers/net/enc28j60.c
parent907519108cd6f45aa067feea6fedd2743739342b (diff)
downloadu-boot-imx-09c04c20962afd25ce5797e263906f84de5b1f4c.zip
u-boot-imx-09c04c20962afd25ce5797e263906f84de5b1f4c.tar.gz
u-boot-imx-09c04c20962afd25ce5797e263906f84de5b1f4c.tar.bz2
Remove instances of phy_read/write
There were a few files which were already using phy_read and phy_write for their PHY function names. It's only a few places, and the name seems most appropriate for the high-level abstraction, so let's rename the other versions to something more specific. Also, uec_phy.c had a marvell_init function which I renamed to not conflict with the one in marvell.c Lastly, uec_phy.c was putting a space between the phy writing function names, and the open paren, so I fixed that Signed-off-by: Andy Fleming <afleming@freescale.com> Acked-by: Detlev Zundel <dzu@denx.de>
Diffstat (limited to 'drivers/net/enc28j60.c')
-rw-r--r--drivers/net/enc28j60.c24
1 files changed, 12 insertions, 12 deletions
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 6c161b6..d55cacd 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -314,7 +314,7 @@ static void enc_release_bus(enc_dev_t *enc)
/*
* Read PHY register
*/
-static u16 phy_read(enc_dev_t *enc, const u8 addr)
+static u16 enc_phy_read(enc_dev_t *enc, const u8 addr)
{
uint64_t etime;
u8 status;
@@ -339,7 +339,7 @@ static u16 phy_read(enc_dev_t *enc, const u8 addr)
/*
* Write PHY register
*/
-static void phy_write(enc_dev_t *enc, const u8 addr, const u16 data)
+static void enc_phy_write(enc_dev_t *enc, const u8 addr, const u16 data)
{
uint64_t etime;
u8 status;
@@ -374,7 +374,7 @@ static int enc_phy_link_wait(enc_dev_t *enc)
#ifdef CONFIG_ENC_SILENTLINK
/* check if we have a link, then just return */
- status = phy_read(enc, PHY_REG_PHSTAT1);
+ status = enc_phy_read(enc, PHY_REG_PHSTAT1);
if (status & ENC_PHSTAT1_LLSTAT)
return 0;
#endif
@@ -382,10 +382,10 @@ static int enc_phy_link_wait(enc_dev_t *enc)
/* wait for link with 1 second timeout */
etime = get_ticks() + get_tbclk();
while (get_ticks() <= etime) {
- status = phy_read(enc, PHY_REG_PHSTAT1);
+ status = enc_phy_read(enc, PHY_REG_PHSTAT1);
if (status & ENC_PHSTAT1_LLSTAT) {
/* now we have a link */
- status = phy_read(enc, PHY_REG_PHSTAT2);
+ status = enc_phy_read(enc, PHY_REG_PHSTAT2);
duplex = (status & ENC_PHSTAT2_DPXSTAT) ? 1 : 0;
printf("%s: link up, 10Mbps %s-duplex\n",
enc->dev->name, duplex ? "full" : "half");
@@ -678,8 +678,8 @@ static int enc_setup(enc_dev_t *enc)
enc->bank = 0xff; /* invalidate current bank in enc28j60 */
/* verify PHY identification */
- phid1 = phy_read(enc, PHY_REG_PHID1);
- phid2 = phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK;
+ phid1 = enc_phy_read(enc, PHY_REG_PHID1);
+ phid2 = enc_phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK;
if (phid1 != ENC_PHID1_VALUE || phid2 != ENC_PHID2_VALUE) {
printf("%s: failed to identify PHY. Found %04x:%04x\n",
enc->dev->name, phid1, phid2);
@@ -694,7 +694,7 @@ static int enc_setup(enc_dev_t *enc)
* Prevent automatic loopback of data beeing transmitted by setting
* ENC_PHCON2_HDLDIS
*/
- phy_write(enc, PHY_REG_PHCON2, (1<<8));
+ enc_phy_write(enc, PHY_REG_PHCON2, (1<<8));
/*
* LEDs configuration
@@ -702,10 +702,10 @@ static int enc_setup(enc_dev_t *enc)
* LEDB: LBCFG = 0111 -> display TX & RX activity
* STRCH = 1 -> LED pulses
*/
- phy_write(enc, PHY_REG_PHLCON, 0x0472);
+ enc_phy_write(enc, PHY_REG_PHLCON, 0x0472);
/* Reset PDPXMD-bit => half duplex */
- phy_write(enc, PHY_REG_PHCON1, 0);
+ enc_phy_write(enc, PHY_REG_PHCON1, 0);
#ifdef CONFIG_USE_IRQ
/* enable interrupts */
@@ -771,7 +771,7 @@ int enc_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value)
enc_release_bus(enc);
return -1;
}
- *value = phy_read(enc, reg);
+ *value = enc_phy_read(enc, reg);
enc_release_bus(enc);
return 0;
}
@@ -796,7 +796,7 @@ int enc_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value)
enc_release_bus(enc);
return -1;
}
- phy_write(enc, reg, value);
+ enc_phy_write(enc, reg, value);
enc_release_bus(enc);
return 0;
}