Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

1 files changed, 17 insertions, 16 deletions

diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index 9de0fb5..9c06b25 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -24,6 +24,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>
 #include <miiphy.h>
@@ -193,14 +194,14 @@ struct descriptor {			/* A generic descriptor. */
 	unsigned char params[0];
 };
 
-#define CFG_CMD_EL		0x8000
-#define CFG_CMD_SUSPEND		0x4000
-#define CFG_CMD_INT		0x2000
-#define CFG_CMD_IAS		0x0001	/* individual address setup */
-#define CFG_CMD_CONFIGURE	0x0002	/* configure */
+#define CONFIG_SYS_CMD_EL		0x8000
+#define CONFIG_SYS_CMD_SUSPEND		0x4000
+#define CONFIG_SYS_CMD_INT		0x2000
+#define CONFIG_SYS_CMD_IAS		0x0001	/* individual address setup */
+#define CONFIG_SYS_CMD_CONFIGURE	0x0002	/* configure */
 
-#define CFG_STATUS_C		0x8000
-#define CFG_STATUS_OK		0x2000
+#define CONFIG_SYS_STATUS_C		0x8000
+#define CONFIG_SYS_STATUS_OK		0x2000
 
 	/* Misc.
 	 */
@@ -528,7 +529,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 	tx_next = ((tx_next + 1) % NUM_TX_DESC);
 
 	cfg_cmd = (struct descriptor *) &tx_ring[tx_cur];
-	cfg_cmd->command = cpu_to_le16 ((CFG_CMD_SUSPEND | CFG_CMD_CONFIGURE));
+	cfg_cmd->command = cpu_to_le16 ((CONFIG_SYS_CMD_SUSPEND | CONFIG_SYS_CMD_CONFIGURE));
 	cfg_cmd->status = 0;
 	cfg_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
 
@@ -536,7 +537,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 			sizeof (i82558_config_cmd));
 
 	if (!wait_for_eepro100 (dev)) {
-		printf ("Error---CFG_CMD_CONFIGURE: Can not reset ethernet controller.\n");
+		printf ("Error---CONFIG_SYS_CMD_CONFIGURE: Can not reset ethernet controller.\n");
 		goto Done;
 	}
 
@@ -544,7 +545,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 	OUTW (dev, SCB_M | CU_START, SCBCmd);
 
 	for (i = 0;
-	     !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+	     !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
 	     i++) {
 		if (i >= TOUT_LOOP) {
 			printf ("%s: Tx error buffer not ready\n", dev->name);
@@ -552,7 +553,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 		}
 	}
 
-	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
 		printf ("TX error status = 0x%08X\n",
 			le16_to_cpu (tx_ring[tx_cur].status));
 		goto Done;
@@ -564,7 +565,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 	tx_next = ((tx_next + 1) % NUM_TX_DESC);
 
 	ias_cmd = (struct descriptor *) &tx_ring[tx_cur];
-	ias_cmd->command = cpu_to_le16 ((CFG_CMD_SUSPEND | CFG_CMD_IAS));
+	ias_cmd->command = cpu_to_le16 ((CONFIG_SYS_CMD_SUSPEND | CONFIG_SYS_CMD_IAS));
 	ias_cmd->status = 0;
 	ias_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
 
@@ -580,7 +581,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 	OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
 	OUTW (dev, SCB_M | CU_START, SCBCmd);
 
-	for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+	for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
 		 i++) {
 		if (i >= TOUT_LOOP) {
 			printf ("%s: Tx error buffer not ready\n",
@@ -589,7 +590,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 		}
 	}
 
-	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
 		printf ("TX error status = 0x%08X\n",
 			le16_to_cpu (tx_ring[tx_cur].status));
 		goto Done;
@@ -639,7 +640,7 @@ static int eepro100_send (struct eth_device *dev, volatile void *packet, int len
 	OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
 	OUTW (dev, SCB_M | CU_START, SCBCmd);
 
-	for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+	for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
 		 i++) {
 		if (i >= TOUT_LOOP) {
 			printf ("%s: Tx error buffer not ready\n", dev->name);
@@ -647,7 +648,7 @@ static int eepro100_send (struct eth_device *dev, volatile void *packet, int len
 		}
 	}
 
-	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
 		printf ("TX error status = 0x%08X\n",
 			le16_to_cpu (tx_ring[tx_cur].status));
 		goto Done;