drivers/net : move net drivers to drivers/net

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 620 insertions, 0 deletions

diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
new file mode 100644
index 0000000..6131b5c
--- /dev/null
+++ b/drivers/net/dm9000x.c
@@ -0,0 +1,620 @@
+/*
+  dm9000.c: Version 1.2 12/15/2003
+
+	A Davicom DM9000 ISA NIC fast Ethernet driver for Linux.
+	Copyright (C) 1997  Sten Wang
+
+	This program is free software; you can redistribute it and/or
+	modify it under the terms of the GNU General Public License
+	as published by the Free Software Foundation; either version 2
+	of the License, or (at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+  (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
+
+V0.11	06/20/2001	REG_0A bit3=1, default enable BP with DA match
+	06/22/2001 	Support DM9801 progrmming
+	 	 	E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000
+		 	E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200
+     		R17 = (R17 & 0xfff0) | NF + 3
+		 	E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200
+     		R17 = (R17 & 0xfff0) | NF
+
+v1.00               	modify by simon 2001.9.5
+	                change for kernel 2.4.x
+
+v1.1   11/09/2001      	fix force mode bug
+
+v1.2   03/18/2003       Weilun Huang <weilun_huang@davicom.com.tw>:
+			Fixed phy reset.
+			Added tx/rx 32 bit mode.
+			Cleaned up for kernel merge.
+
+--------------------------------------
+
+       12/15/2003       Initial port to u-boot by Sascha Hauer <saschahauer@web.de>
+
+TODO: Homerun NIC and longrun NIC are not functional, only internal at the
+      moment.
+*/
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_DRIVER_DM9000
+
+#include "dm9000x.h"
+
+/* Board/System/Debug information/definition ---------------- */
+
+#define DM9801_NOISE_FLOOR	0x08
+#define DM9802_NOISE_FLOOR	0x05
+
+/* #define CONFIG_DM9000_DEBUG */
+
+#ifdef CONFIG_DM9000_DEBUG
+#define DM9000_DBG(fmt,args...) printf(fmt ,##args)
+#else				/*  */
+#define DM9000_DBG(fmt,args...)
+#endif				/*  */
+enum DM9000_PHY_mode { DM9000_10MHD = 0, DM9000_100MHD =
+	    1, DM9000_10MFD = 4, DM9000_100MFD = 5, DM9000_AUTO =
+	    8, DM9000_1M_HPNA = 0x10
+};
+enum DM9000_NIC_TYPE { FASTETHER_NIC = 0, HOMERUN_NIC = 1, LONGRUN_NIC = 2
+};
+
+/* Structure/enum declaration ------------------------------- */
+typedef struct board_info {
+	u32 runt_length_counter;	/* counter: RX length < 64byte */
+	u32 long_length_counter;	/* counter: RX length > 1514byte */
+	u32 reset_counter;	/* counter: RESET */
+	u32 reset_tx_timeout;	/* RESET caused by TX Timeout */
+	u32 reset_rx_status;	/* RESET caused by RX Statsus wrong */
+	u16 tx_pkt_cnt;
+	u16 queue_start_addr;
+	u16 dbug_cnt;
+	u8 phy_addr;
+	u8 device_wait_reset;	/* device state */
+	u8 nic_type;		/* NIC type */
+	unsigned char srom[128];
+} board_info_t;
+board_info_t dmfe_info;
+
+/* For module input parameter */
+static int media_mode = DM9000_AUTO;
+static u8 nfloor = 0;
+
+/* function declaration ------------------------------------- */
+int eth_init(bd_t * bd);
+int eth_send(volatile void *, int);
+int eth_rx(void);
+void eth_halt(void);
+static int dm9000_probe(void);
+static u16 phy_read(int);
+static void phy_write(int, u16);
+u16 read_srom_word(int);
+static u8 DM9000_ior(int);
+static void DM9000_iow(int reg, u8 value);
+
+/* DM9000 network board routine ---------------------------- */
+
+#define DM9000_outb(d,r) ( *(volatile u8 *)r = d )
+#define DM9000_outw(d,r) ( *(volatile u16 *)r = d )
+#define DM9000_outl(d,r) ( *(volatile u32 *)r = d )
+#define DM9000_inb(r) (*(volatile u8 *)r)
+#define DM9000_inw(r) (*(volatile u16 *)r)
+#define DM9000_inl(r) (*(volatile u32 *)r)
+
+#ifdef CONFIG_DM9000_DEBUG
+static void
+dump_regs(void)
+{
+	DM9000_DBG("\n");
+	DM9000_DBG("NCR   (0x00): %02x\n", DM9000_ior(0));
+	DM9000_DBG("NSR   (0x01): %02x\n", DM9000_ior(1));
+	DM9000_DBG("TCR   (0x02): %02x\n", DM9000_ior(2));
+	DM9000_DBG("TSRI  (0x03): %02x\n", DM9000_ior(3));
+	DM9000_DBG("TSRII (0x04): %02x\n", DM9000_ior(4));
+	DM9000_DBG("RCR   (0x05): %02x\n", DM9000_ior(5));
+	DM9000_DBG("RSR   (0x06): %02x\n", DM9000_ior(6));
+	DM9000_DBG("ISR   (0xFE): %02x\n", DM9000_ior(ISR));
+	DM9000_DBG("\n");
+}
+#endif				/*  */
+
+/*
+  Search DM9000 board, allocate space and register it
+*/
+int
+dm9000_probe(void)
+{
+	u32 id_val;
+	id_val = DM9000_ior(DM9000_VIDL);
+	id_val |= DM9000_ior(DM9000_VIDH) << 8;
+	id_val |= DM9000_ior(DM9000_PIDL) << 16;
+	id_val |= DM9000_ior(DM9000_PIDH) << 24;
+	if (id_val == DM9000_ID) {
+		printf("dm9000 i/o: 0x%x, id: 0x%x \n", CONFIG_DM9000_BASE,
+		       id_val);
+		return 0;
+	} else {
+		printf("dm9000 not found at 0x%08x id: 0x%08x\n",
+		       CONFIG_DM9000_BASE, id_val);
+		return -1;
+	}
+}
+
+/* Set PHY operationg mode
+*/
+static void
+set_PHY_mode(void)
+{
+	u16 phy_reg4 = 0x01e1, phy_reg0 = 0x1000;
+	if (!(media_mode & DM9000_AUTO)) {
+		switch (media_mode) {
+		case DM9000_10MHD:
+			phy_reg4 = 0x21;
+			phy_reg0 = 0x0000;
+			break;
+		case DM9000_10MFD:
+			phy_reg4 = 0x41;
+			phy_reg0 = 0x1100;
+			break;
+		case DM9000_100MHD:
+			phy_reg4 = 0x81;
+			phy_reg0 = 0x2000;
+			break;
+		case DM9000_100MFD:
+			phy_reg4 = 0x101;
+			phy_reg0 = 0x3100;
+			break;
+		}
+		phy_write(4, phy_reg4);	/* Set PHY media mode */
+		phy_write(0, phy_reg0);	/*  Tmp */
+	}
+	DM9000_iow(DM9000_GPCR, 0x01);	/* Let GPIO0 output */
+	DM9000_iow(DM9000_GPR, 0x00);	/* Enable PHY */
+}
+
+/*
+	Init HomeRun DM9801
+*/
+static void
+program_dm9801(u16 HPNA_rev)
+{
+	__u16 reg16, reg17, reg24, reg25;
+	if (!nfloor)
+		nfloor = DM9801_NOISE_FLOOR;
+	reg16 = phy_read(16);
+	reg17 = phy_read(17);
+	reg24 = phy_read(24);
+	reg25 = phy_read(25);
+	switch (HPNA_rev) {
+	case 0xb900:		/* DM9801 E3 */
+		reg16 |= 0x1000;
+		reg25 = ((reg24 + nfloor) & 0x00ff) | 0xf000;
+		break;
+	case 0xb901:		/* DM9801 E4 */
+		reg25 = ((reg24 + nfloor) & 0x00ff) | 0xc200;
+		reg17 = (reg17 & 0xfff0) + nfloor + 3;
+		break;
+	case 0xb902:		/* DM9801 E5 */
+	case 0xb903:		/* DM9801 E6 */
+	default:
+		reg16 |= 0x1000;
+		reg25 = ((reg24 + nfloor - 3) & 0x00ff) | 0xc200;
+		reg17 = (reg17 & 0xfff0) + nfloor;
+	}
+	phy_write(16, reg16);
+	phy_write(17, reg17);
+	phy_write(25, reg25);
+}
+
+/*
+	Init LongRun DM9802
+*/
+static void
+program_dm9802(void)
+{
+	__u16 reg25;
+	if (!nfloor)
+		nfloor = DM9802_NOISE_FLOOR;
+	reg25 = phy_read(25);
+	reg25 = (reg25 & 0xff00) + nfloor;
+	phy_write(25, reg25);
+}
+
+/* Identify NIC type
+*/
+static void
+identify_nic(void)
+{
+	struct board_info *db = &dmfe_info;	/* Point a board information structure */
+	u16 phy_reg3;
+	DM9000_iow(DM9000_NCR, NCR_EXT_PHY);
+	phy_reg3 = phy_read(3);
+	switch (phy_reg3 & 0xfff0) {
+	case 0xb900:
+		if (phy_read(31) == 0x4404) {
+			db->nic_type = HOMERUN_NIC;
+			program_dm9801(phy_reg3);
+			DM9000_DBG("found homerun NIC\n");
+		} else {
+			db->nic_type = LONGRUN_NIC;
+			DM9000_DBG("found longrun NIC\n");
+			program_dm9802();
+		}
+		break;
+	default:
+		db->nic_type = FASTETHER_NIC;
+		break;
+	}
+	DM9000_iow(DM9000_NCR, 0);
+}
+
+/* General Purpose dm9000 reset routine */
+static void
+dm9000_reset(void)
+{
+	DM9000_DBG("resetting\n");
+	DM9000_iow(DM9000_NCR, NCR_RST);
+	udelay(1000);		/* delay 1ms */
+}
+
+/* Initilize dm9000 board
+*/
+int
+eth_init(bd_t * bd)
+{
+	int i, oft, lnk;
+	DM9000_DBG("eth_init()\n");
+
+	/* RESET device */
+	dm9000_reset();
+	dm9000_probe();
+
+	/* NIC Type: FASTETHER, HOMERUN, LONGRUN */
+	identify_nic();
+
+	/* GPIO0 on pre-activate PHY */
+	DM9000_iow(DM9000_GPR, 0x00);	/*REG_1F bit0 activate phyxcer */
+
+	/* Set PHY */
+	set_PHY_mode();
+
+	/* Program operating register */
+	DM9000_iow(DM9000_NCR, 0x0);	/* only intern phy supported by now */
+	DM9000_iow(DM9000_TCR, 0);	/* TX Polling clear */
+	DM9000_iow(DM9000_BPTR, 0x3f);	/* Less 3Kb, 200us */
+	DM9000_iow(DM9000_FCTR, FCTR_HWOT(3) | FCTR_LWOT(8));	/* Flow Control : High/Low Water */
+	DM9000_iow(DM9000_FCR, 0x0);	/* SH FIXME: This looks strange! Flow Control */
+	DM9000_iow(DM9000_SMCR, 0);	/* Special Mode */
+	DM9000_iow(DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END);	/* clear TX status */
+	DM9000_iow(DM9000_ISR, 0x0f);	/* Clear interrupt status */
+
+	/* Set Node address */
+	for (i = 0; i < 6; i++)
+		((u16 *) bd->bi_enetaddr)[i] = read_srom_word(i);
+
+	if (is_zero_ether_addr(bd->bi_enetaddr) ||
+	    is_multicast_ether_addr(bd->bi_enetaddr)) {
+		/* try reading from environment */
+		u8 i;
+		char *s, *e;
+		s = getenv ("ethaddr");
+		for (i = 0; i < 6; ++i) {
+			bd->bi_enetaddr[i] = s ?
+				simple_strtoul (s, &e, 16) : 0;
+			if (s)
+				s = (*e) ? e + 1 : e;
+		}
+	}
+
+	printf("MAC: %02x:%02x:%02x:%02x:%02x:%02x\n", bd->bi_enetaddr[0],
+	       bd->bi_enetaddr[1], bd->bi_enetaddr[2], bd->bi_enetaddr[3],
+	       bd->bi_enetaddr[4], bd->bi_enetaddr[5]);
+	for (i = 0, oft = 0x10; i < 6; i++, oft++)
+		DM9000_iow(oft, bd->bi_enetaddr[i]);
+	for (i = 0, oft = 0x16; i < 8; i++, oft++)
+		DM9000_iow(oft, 0xff);
+
+	/* read back mac, just to be sure */
+	for (i = 0, oft = 0x10; i < 6; i++, oft++)
+		DM9000_DBG("%02x:", DM9000_ior(oft));
+	DM9000_DBG("\n");
+
+	/* Activate DM9000 */
+	DM9000_iow(DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN);	/* RX enable */
+	DM9000_iow(DM9000_IMR, IMR_PAR);	/* Enable TX/RX interrupt mask */
+	i = 0;
+	while (!(phy_read(1) & 0x20)) {	/* autonegation complete bit */
+		udelay(1000);
+		i++;
+		if (i == 10000) {
+			printf("could not establish link\n");
+			return 0;
+		}
+	}
+
+	/* see what we've got */
+	lnk = phy_read(17) >> 12;
+	printf("operating at ");
+	switch (lnk) {
+	case 1:
+		printf("10M half duplex ");
+		break;
+	case 2:
+		printf("10M full duplex ");
+		break;
+	case 4:
+		printf("100M half duplex ");
+		break;
+	case 8:
+		printf("100M full duplex ");
+		break;
+	default:
+		printf("unknown: %d ", lnk);
+		break;
+	}
+	printf("mode\n");
+	return 0;
+}
+
+/*
+  Hardware start transmission.
+  Send a packet to media from the upper layer.
+*/
+int
+eth_send(volatile void *packet, int length)
+{
+	char *data_ptr;
+	u32 tmplen, i;
+	int tmo;
+	DM9000_DBG("eth_send: length: %d\n", length);
+	for (i = 0; i < length; i++) {
+		if (i % 8 == 0)
+			DM9000_DBG("\nSend: 02x: ", i);
+		DM9000_DBG("%02x ", ((unsigned char *) packet)[i]);
+	} DM9000_DBG("\n");
+
+	/* Move data to DM9000 TX RAM */
+	data_ptr = (char *) packet;
+	DM9000_outb(DM9000_MWCMD, DM9000_IO);
+
+#ifdef CONFIG_DM9000_USE_8BIT
+	/* Byte mode */
+	for (i = 0; i < length; i++)
+		DM9000_outb((data_ptr[i] & 0xff), DM9000_DATA);
+
+#endif				/*  */
+#ifdef CONFIG_DM9000_USE_16BIT
+	tmplen = (length + 1) / 2;
+	for (i = 0; i < tmplen; i++)
+		DM9000_outw(((u16 *) data_ptr)[i], DM9000_DATA);
+
+#endif				/*  */
+#ifdef CONFIG_DM9000_USE_32BIT
+	tmplen = (length + 3) / 4;
+	for (i = 0; i < tmplen; i++)
+		DM9000_outl(((u32 *) data_ptr)[i], DM9000_DATA);
+
+#endif				/*  */
+
+	/* Set TX length to DM9000 */
+	DM9000_iow(DM9000_TXPLL, length & 0xff);
+	DM9000_iow(DM9000_TXPLH, (length >> 8) & 0xff);
+
+	/* Issue TX polling command */
+	DM9000_iow(DM9000_TCR, TCR_TXREQ);	/* Cleared after TX complete */
+
+	/* wait for end of transmission */
+	tmo = get_timer(0) + 5 * CFG_HZ;
+	while (DM9000_ior(DM9000_TCR) & TCR_TXREQ) {
+		if (get_timer(0) >= tmo) {
+			printf("transmission timeout\n");
+			break;
+		}
+	}
+	DM9000_DBG("transmit done\n\n");
+	return 0;
+}
+
+/*
+  Stop the interface.
+  The interface is stopped when it is brought.
+*/
+void
+eth_halt(void)
+{
+	DM9000_DBG("eth_halt\n");
+
+	/* RESET devie */
+	phy_write(0, 0x8000);	/* PHY RESET */
+	DM9000_iow(DM9000_GPR, 0x01);	/* Power-Down PHY */
+	DM9000_iow(DM9000_IMR, 0x80);	/* Disable all interrupt */
+	DM9000_iow(DM9000_RCR, 0x00);	/* Disable RX */
+}
+
+/*
+  Received a packet and pass to upper layer
+*/
+int
+eth_rx(void)
+{
+	u8 rxbyte, *rdptr = (u8 *) NetRxPackets[0];
+	u16 RxStatus, RxLen = 0;
+	u32 tmplen, i;
+#ifdef CONFIG_DM9000_USE_32BIT
+	u32 tmpdata;
+#endif
+
+	/* Check packet ready or not */
+	DM9000_ior(DM9000_MRCMDX);	/* Dummy read */
+	rxbyte = DM9000_inb(DM9000_DATA);	/* Got most updated data */
+	if (rxbyte == 0)
+		return 0;
+
+	/* Status check: this byte must be 0 or 1 */
+	if (rxbyte > 1) {
+		DM9000_iow(DM9000_RCR, 0x00);	/* Stop Device */
+		DM9000_iow(DM9000_ISR, 0x80);	/* Stop INT request */
+		DM9000_DBG("rx status check: %d\n", rxbyte);
+	}
+	DM9000_DBG("receiving packet\n");
+
+	/* A packet ready now  & Get status/length */
+	DM9000_outb(DM9000_MRCMD, DM9000_IO);
+
+#ifdef CONFIG_DM9000_USE_8BIT
+	RxStatus = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
+	RxLen = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
+
+#endif				/*  */
+#ifdef CONFIG_DM9000_USE_16BIT
+	RxStatus = DM9000_inw(DM9000_DATA);
+	RxLen = DM9000_inw(DM9000_DATA);
+
+#endif				/*  */
+#ifdef CONFIG_DM9000_USE_32BIT
+	tmpdata = DM9000_inl(DM9000_DATA);
+	RxStatus = tmpdata;
+	RxLen = tmpdata >> 16;
+
+#endif				/*  */
+	DM9000_DBG("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen);
+
+	/* Move data from DM9000 */
+	/* Read received packet from RX SRAM */
+#ifdef CONFIG_DM9000_USE_8BIT
+	for (i = 0; i < RxLen; i++)
+		rdptr[i] = DM9000_inb(DM9000_DATA);
+
+#endif				/*  */
+#ifdef CONFIG_DM9000_USE_16BIT
+	tmplen = (RxLen + 1) / 2;
+	for (i = 0; i < tmplen; i++)
+		((u16 *) rdptr)[i] = DM9000_inw(DM9000_DATA);
+
+#endif				/*  */
+#ifdef CONFIG_DM9000_USE_32BIT
+	tmplen = (RxLen + 3) / 4;
+	for (i = 0; i < tmplen; i++)
+		((u32 *) rdptr)[i] = DM9000_inl(DM9000_DATA);
+
+#endif				/*  */
+	if ((RxStatus & 0xbf00) || (RxLen < 0x40)
+	    || (RxLen > DM9000_PKT_MAX)) {
+		if (RxStatus & 0x100) {
+			printf("rx fifo error\n");
+		}
+		if (RxStatus & 0x200) {
+			printf("rx crc error\n");
+		}
+		if (RxStatus & 0x8000) {
+			printf("rx length error\n");
+		}
+		if (RxLen > DM9000_PKT_MAX) {
+			printf("rx length too big\n");
+			dm9000_reset();
+		}
+	} else {
+
+		/* Pass to upper layer */
+		DM9000_DBG("passing packet to upper layer\n");
+		NetReceive(NetRxPackets[0], RxLen);
+		return RxLen;
+	}
+	return 0;
+}
+
+/*
+  Read a word data from SROM
+*/
+u16
+read_srom_word(int offset)
+{
+	DM9000_iow(DM9000_EPAR, offset);
+	DM9000_iow(DM9000_EPCR, 0x4);
+	udelay(8000);
+	DM9000_iow(DM9000_EPCR, 0x0);
+	return (DM9000_ior(DM9000_EPDRL) + (DM9000_ior(DM9000_EPDRH) << 8));
+}
+
+void
+write_srom_word(int offset, u16 val)
+{
+	DM9000_iow(DM9000_EPAR, offset);
+	DM9000_iow(DM9000_EPDRH, ((val >> 8) & 0xff));
+	DM9000_iow(DM9000_EPDRL, (val & 0xff));
+	DM9000_iow(DM9000_EPCR, 0x12);
+	udelay(8000);
+	DM9000_iow(DM9000_EPCR, 0);
+}
+
+
+/*
+   Read a byte from I/O port
+*/
+static u8
+DM9000_ior(int reg)
+{
+	DM9000_outb(reg, DM9000_IO);
+	return DM9000_inb(DM9000_DATA);
+}
+
+/*
+   Write a byte to I/O port
+*/
+static void
+DM9000_iow(int reg, u8 value)
+{
+	DM9000_outb(reg, DM9000_IO);
+	DM9000_outb(value, DM9000_DATA);
+}
+
+/*
+   Read a word from phyxcer
+*/
+static u16
+phy_read(int reg)
+{
+	u16 val;
+
+	/* Fill the phyxcer register into REG_0C */
+	DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
+	DM9000_iow(DM9000_EPCR, 0xc);	/* Issue phyxcer read command */
+	udelay(100);		/* Wait read complete */
+	DM9000_iow(DM9000_EPCR, 0x0);	/* Clear phyxcer read command */
+	val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL);
+
+	/* The read data keeps on REG_0D & REG_0E */
+	DM9000_DBG("phy_read(%d): %d\n", reg, val);
+	return val;
+}
+
+/*
+   Write a word to phyxcer
+*/
+static void
+phy_write(int reg, u16 value)
+{
+
+	/* Fill the phyxcer register into REG_0C */
+	DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
+
+	/* Fill the written data into REG_0D & REG_0E */
+	DM9000_iow(DM9000_EPDRL, (value & 0xff));
+	DM9000_iow(DM9000_EPDRH, ((value >> 8) & 0xff));
+	DM9000_iow(DM9000_EPCR, 0xa);	/* Issue phyxcer write command */
+	udelay(500);		/* Wait write complete */
+	DM9000_iow(DM9000_EPCR, 0x0);	/* Clear phyxcer write command */
+	DM9000_DBG("phy_write(reg:%d, value:%d)\n", reg, value);
+}
+#endif				/* CONFIG_DRIVER_DM9000 */