drivers/net : move net drivers to drivers/net

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 519 insertions, 0 deletions

diff --git a/drivers/net/3c589.c b/drivers/net/3c589.c
new file mode 100644
index 0000000..080b686
--- /dev/null
+++ b/drivers/net/3c589.c
@@ -0,0 +1,519 @@
+/*------------------------------------------------------------------------
+ . 3c589.c
+ . This is a driver for 3Com's 3C589 (Etherlink III) PCMCIA Ethernet device.
+ .
+ . (C) Copyright 2002
+ . Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ . Rolf Offermanns <rof@sysgo.de>
+ .
+ . This program is free software; you can redistribute it and/or modify
+ . it under the terms of the GNU General Public License as published by
+ . the Free Software Foundation; either version 2 of the License, or
+ . (at your option) any later version.
+ .
+ . This program is distributed in the hope that it will be useful,
+ . but WITHOUT ANY WARRANTY; without even the implied warranty of
+ . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ . GNU General Public License for more details.
+ .
+ . You should have received a copy of the GNU General Public License
+ . along with this program; if not, write to the Free Software
+ . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ .
+ ----------------------------------------------------------------------------*/
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+
+#ifdef CONFIG_DRIVER_3C589
+
+#include "3c589.h"
+
+
+/* Use power-down feature of the chip */
+#define POWER_DOWN	0
+
+#define NO_AUTOPROBE
+
+static const char version[] =
+	"Your ad here! :P\n";
+
+
+#undef EL_DEBUG
+
+typedef unsigned char byte;
+typedef unsigned short word;
+typedef unsigned long int dword;
+/*------------------------------------------------------------------------
+ .
+ . Configuration options, for the experienced user to change.
+ .
+ -------------------------------------------------------------------------*/
+
+/*
+ . Wait time for memory to be free.  This probably shouldn't be
+ . tuned that much, as waiting for this means nothing else happens
+ . in the system
+*/
+#define MEMORY_WAIT_TIME 16
+
+
+#if (EL_DEBUG > 2 )
+#define PRINTK3(args...) printf(args)
+#else
+#define PRINTK3(args...)
+#endif
+
+#if EL_DEBUG > 1
+#define PRINTK2(args...) printf(args)
+#else
+#define PRINTK2(args...)
+#endif
+
+#ifdef EL_DEBUG
+#define PRINTK(args...) printf(args)
+#else
+#define PRINTK(args...)
+#endif
+
+#define outb(args...)	mmio_outb(args)
+#define mmio_outb(value, addr)	(*((volatile byte *)(addr)) = value)
+
+#define inb(args...)	mmio_inb(args)
+#define mmio_inb(addr) (*((volatile byte *)(addr)))
+
+#define outw(args...)	mmio_outw(args)
+#define mmio_outw(value, addr)	(*((volatile word *)(addr)) = value)
+
+#define inw(args...)	mmio_inw(args)
+#define mmio_inw(addr) (*((volatile word *)(addr)))
+
+#define outsw(args...)	mmio_outsw(args)
+#define mmio_outsw(r,b,l)	({	int __i; \
+					word *__b2; \
+					__b2 = (word *) b; \
+					for (__i = 0; __i < l; __i++) { \
+					    mmio_outw( *(__b2 + __i), r); \
+					} \
+				})
+
+#define insw(args...)	mmio_insw(args)
+#define mmio_insw(r,b,l) 	({	int __i ;  \
+					word *__b2;  \
+					__b2 = (word *) b;  \
+					for (__i = 0; __i < l; __i++) {  \
+					  *(__b2 + __i) = mmio_inw(r);  \
+					  mmio_inw(0);  \
+					};  \
+				})
+
+/*------------------------------------------------------------------------
+ .
+ . The internal workings of the driver.  If you are changing anything
+ . here with the 3Com stuff, you should have the datasheet and know
+ . what you are doing.
+ .
+ -------------------------------------------------------------------------*/
+#define EL_BASE_ADDR	0x20000000
+
+
+/* Offsets from base I/O address. */
+#define EL3_DATA	0x00
+#define EL3_TIMER	0x0a
+#define EL3_CMD		0x0e
+#define EL3_STATUS	0x0e
+
+#define EEPROM_READ	0x0080
+
+#define EL3WINDOW(win_num) mmio_outw(SelectWindow + (win_num), EL_BASE_ADDR + EL3_CMD)
+
+/* The top five bits written to EL3_CMD are a command, the lower
+   11 bits are the parameter, if applicable. */
+enum c509cmd {
+    TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
+    RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11,
+    TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
+    FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
+    SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
+    SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11,
+    StatsDisable = 22<<11, StopCoax = 23<<11,
+};
+
+enum c509status {
+    IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
+    TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+    IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000
+};
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+    RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
+};
+
+/* Register window 1 offsets, the window used in normal operation. */
+#define TX_FIFO		0x00
+#define RX_FIFO		0x00
+#define RX_STATUS 	0x08
+#define TX_STATUS 	0x0B
+#define TX_FREE		0x0C	/* Remaining free bytes in Tx buffer. */
+
+
+/*
+  Read a word from the EEPROM using the regular EEPROM access register.
+  Assume that we are in register window zero.
+*/
+static word read_eeprom(dword ioaddr, int index)
+{
+    int i;
+    outw(EEPROM_READ + index, ioaddr + 0xa);
+    /* Reading the eeprom takes 162 us */
+    for (i = 1620; i >= 0; i--)
+	if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0)
+	    break;
+    return inw(ioaddr + 0xc);
+}
+
+static void el_get_mac_addr( unsigned char *mac_addr )
+{
+	int i;
+	union
+	{
+		word w;
+		unsigned char b[2];
+	} wrd;
+	unsigned char old_window = inw( EL_BASE_ADDR + EL3_STATUS ) >> 13;
+	GO_WINDOW(0);
+	VX_BUSY_WAIT;
+	for (i = 0; i < 3; i++)
+	{
+		wrd.w = read_eeprom(EL_BASE_ADDR, 0xa+i);
+#ifdef __BIG_ENDIAN
+		mac_addr[2*i]   = wrd.b[0];
+		mac_addr[2*i+1] = wrd.b[1];
+#else
+		mac_addr[2*i]   = wrd.b[1];
+		mac_addr[2*i+1] = wrd.b[0];
+#endif
+	}
+	GO_WINDOW(old_window);
+	VX_BUSY_WAIT;
+}
+
+
+#if EL_DEBUG > 1
+static void print_packet( byte * buf, int length )
+{
+	int i;
+	int remainder;
+	int lines;
+
+	PRINTK2("Packet of length %d \n", length );
+
+	lines = length / 16;
+	remainder = length % 16;
+
+	for ( i = 0; i < lines ; i ++ ) {
+		int cur;
+
+		for ( cur = 0; cur < 8; cur ++ ) {
+			byte a, b;
+
+			a = *(buf ++ );
+			b = *(buf ++ );
+			PRINTK2("%02x%02x ", a, b );
+		}
+		PRINTK2("\n");
+	}
+	for ( i = 0; i < remainder/2 ; i++ ) {
+		byte a, b;
+
+		a = *(buf ++ );
+		b = *(buf ++ );
+		PRINTK2("%02x%02x ", a, b );
+	}
+	PRINTK2("\n");
+}
+#endif /* EL_DEBUG > 1 */
+
+
+/**************************************************************************
+ETH_RESET - Reset adapter
+***************************************************************************/
+static void el_reset(bd_t *bd)
+{
+	/***********************************************************
+			Reset 3Com 595 card
+	*************************************************************/
+	/* QUICK HACK
+	 * - adjust timing for 3c589
+	 * - enable io for PCMCIA */
+	outw(0x0004, 0xa0000018);
+	udelay(100);
+	outw(0x0041, 0x28010000);
+	udelay(100);
+
+	/* issue global reset */
+	outw(GLOBAL_RESET, BASE + VX_COMMAND);
+
+	/* must wait for at least 1ms */
+	udelay(100000000);
+
+	/* set mac addr */
+	{
+		unsigned char *mac_addr = bd->bi_enetaddr;
+		int i;
+
+		el_get_mac_addr( mac_addr );
+
+		GO_WINDOW(2);
+		VX_BUSY_WAIT;
+
+		printf("3C589 MAC Addr.: ");
+		for (i = 0; i < 6; i++)
+		{
+			printf("%02x", mac_addr[i]);
+			outb(mac_addr[i], BASE + VX_W2_ADDR_0 + i);
+			VX_BUSY_WAIT;
+		}
+		printf("\n\n");
+	}
+
+	/* set RX filter */
+	outw(SET_RX_FILTER | FIL_INDIVIDUAL | FIL_BRDCST, BASE + VX_COMMAND);
+	VX_BUSY_WAIT;
+
+
+	/* set irq mask and read_zero */
+	outw(SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
+		S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
+	VX_BUSY_WAIT;
+
+	outw(SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
+		S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
+	VX_BUSY_WAIT;
+
+	/* enable TP Linkbeat */
+	GO_WINDOW(4);
+	VX_BUSY_WAIT;
+
+	outw( ENABLE_UTP, BASE + VX_W4_MEDIA_TYPE);
+	VX_BUSY_WAIT;
+
+
+/*
+ * Attempt to get rid of any stray interrupts that occured during
+ * configuration.  On the i386 this isn't possible because one may
+ * already be queued.  However, a single stray interrupt is
+ * unimportant.
+ */
+
+	outw(ACK_INTR | 0xff, BASE + VX_COMMAND);
+	VX_BUSY_WAIT;
+
+	/* enable TX and RX */
+	outw( RX_ENABLE, BASE + VX_COMMAND );
+	VX_BUSY_WAIT;
+
+	outw( TX_ENABLE, BASE + VX_COMMAND );
+	VX_BUSY_WAIT;
+
+
+	/* print the diag. regs. */
+	PRINTK2("Diag. Regs\n");
+	PRINTK2("--> MEDIA_TYPE:   %04x\n", inw(BASE + VX_W4_MEDIA_TYPE));
+	PRINTK2("--> NET_DIAG:     %04x\n", inw(BASE + VX_W4_NET_DIAG));
+	PRINTK2("--> FIFO_DIAG:    %04x\n", inw(BASE + VX_W4_FIFO_DIAG));
+	PRINTK2("--> CTRLR_STATUS: %04x\n", inw(BASE + VX_W4_CTRLR_STATUS));
+	PRINTK2("\n\n");
+
+	/* enter working mode */
+	GO_WINDOW(1);
+	VX_BUSY_WAIT;
+
+	/* wait for another 1ms */
+	udelay(100000000);
+}
+
+
+/*-----------------------------------------------------------------
+ .
+ .  The driver can be entered at any of the following entry points.
+ .
+ .------------------------------------------------------------------  */
+
+extern int eth_init(bd_t *bd);
+extern void eth_halt(void);
+extern int eth_rx(void);
+extern int eth_send(volatile void *packet, int length);
+
+
+/*
+ ------------------------------------------------------------
+ .
+ . Internal routines
+ .
+ ------------------------------------------------------------
+*/
+
+int eth_init(bd_t *bd)
+{
+	el_reset(bd);
+	return 0;
+}
+
+void eth_halt() {
+	return;
+}
+
+#define EDEBUG 1
+
+
+/**************************************************************************
+ETH_POLL - Wait for a frame
+***************************************************************************/
+
+int eth_rx()
+{
+	word status, rx_status, packet_size;
+
+	VX_BUSY_WAIT;
+
+	status = inw( BASE + VX_STATUS );
+
+	if ( (status & S_RX_COMPLETE) == 0 ) return 0; /* nothing to do */
+
+	/* Packet waiting -> check RX_STATUS */
+	rx_status = inw( BASE + VX_W1_RX_STATUS );
+
+	if ( rx_status & ERR_RX )
+	{
+		/* error in packet -> discard */
+		PRINTK("[ERROR] Invalid packet -> discarding\n");
+		PRINTK("-- error code 0x%02x\n", rx_status & ERR_MASK);
+		PRINTK("-- rx bytes 0x%04d\n", rx_status & ((1<<11) - 1));
+		PRINTK("[ERROR] Invalid packet -> discarding\n");
+		outw( RX_DISCARD_TOP_PACK, BASE + VX_COMMAND );
+		return 0;
+	}
+
+	/* correct pack. waiting in fifo */
+	packet_size = rx_status & RX_BYTES_MASK;
+
+	PRINTK("Correct packet waiting in fifo, size: %d\n", packet_size);
+
+	{
+		volatile word *packet_start = (word *)(BASE + VX_W1_RX_PIO_RD_1);
+		word *RcvBuffer = (word *)(NetRxPackets[0]);
+		int wcount = 0;
+
+		for (wcount = 0; wcount < (packet_size >> 1); wcount++)
+		{
+			*RcvBuffer++ = *(packet_start);
+		}
+
+		/* handle odd packets */
+		if ( packet_size & 1 )
+		{
+			*RcvBuffer++ = *(packet_start);
+		}
+	}
+
+	/* fifo should now be empty (besides the padding bytes) */
+	if ( ((*((word *)(BASE + VX_W1_RX_STATUS))) & RX_BYTES_MASK) > 3 )
+	{
+		PRINTK("[ERROR] Fifo not empty after packet read (remaining pkts: %d)\n",
+			(((*(word *)(BASE + VX_W1_RX_STATUS))) & RX_BYTES_MASK));
+	}
+
+	/* discard packet */
+	*((word *)(BASE + VX_COMMAND)) = RX_DISCARD_TOP_PACK;
+
+	/* Pass Packets to upper Layer */
+	NetReceive(NetRxPackets[0], packet_size);
+	return packet_size;
+}
+
+
+/**************************************************************************
+ETH_TRANSMIT - Transmit a frame
+***************************************************************************/
+static char padmap[] = {
+	0, 3, 2, 1};
+
+
+int eth_send(volatile void *packet, int length) {
+	int pad;
+	int status;
+	volatile word *buf = (word *)packet;
+	int dummy = 0;
+
+	/* padding stuff */
+	pad = padmap[length & 3];
+
+	PRINTK("eth_send(), length: %d\n", length);
+	/* drop acknowledgements */
+	while(( status=inb(EL_BASE_ADDR + VX_W1_TX_STATUS) )& TXS_COMPLETE ) {
+		if(status & (TXS_UNDERRUN|TXS_MAX_COLLISION|TXS_STATUS_OVERFLOW)) {
+			outw(TX_RESET, EL_BASE_ADDR + VX_COMMAND);
+			outw(TX_ENABLE, EL_BASE_ADDR + VX_COMMAND);
+			PRINTK("Bad status, resetting and reenabling transmitter\n");
+		}
+
+		outb(0x0, EL_BASE_ADDR + VX_W1_TX_STATUS);
+	}
+
+
+	while (inw(EL_BASE_ADDR + VX_W1_FREE_TX) < length + pad + 4) {
+		/* no room in FIFO */
+		if (dummy == 0)
+		{
+			PRINTK("No room in FIFO, waiting...\n");
+			dummy++;
+		}
+
+	}
+
+	PRINTK("    ---> FIFO ready\n");
+
+
+	outw(length, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
+
+	/* Second dword meaningless */
+	outw(0x0, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
+
+#if EL_DEBUG > 1
+	print_packet((byte *)buf, length);
+#endif
+
+	/* write packet */
+	{
+		unsigned int i, totw;
+
+		totw = ((length + 1) >> 1);
+		PRINTK("Buffer: (totw = %d)\n", totw);
+		for (i = 0; i < totw; i++) {
+			outw( *(buf+i), EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
+			udelay(10);
+		}
+		if(totw & 1)
+		{	/* pad to double word length */
+			outw( 0, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
+			udelay(10);
+		}
+		PRINTK("\n\n");
+	}
+
+	/* wait for Tx complete */
+	PRINTK("Waiting for Tx to complete...\n");
+	while(((status = inw(EL_BASE_ADDR + VX_STATUS)) & S_COMMAND_IN_PROGRESS) != 0)
+	{
+		udelay(10);
+	}
+	PRINTK("   ---> Tx completed, status = 0x%04x\n", status);
+
+	return length;
+}
+
+
+#endif /* CONFIG_DRIVER_3C589 */