summaryrefslogtreecommitdiff
path: root/drivers/natsemi.c
diff options
context:
space:
mode:
authorJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>2007-11-21 21:19:24 +0100
committerJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>2007-11-25 18:35:17 +0100
commit2439e4bfa111babf4bc07ba20efbf3e36036813e (patch)
tree21e94282acdc681bdde2ccc270bd401254124d00 /drivers/natsemi.c
parent352d259130b349fe9593b8dada641bd78a9659e5 (diff)
downloadu-boot-imx-2439e4bfa111babf4bc07ba20efbf3e36036813e.zip
u-boot-imx-2439e4bfa111babf4bc07ba20efbf3e36036813e.tar.gz
u-boot-imx-2439e4bfa111babf4bc07ba20efbf3e36036813e.tar.bz2
drivers/net : move net drivers to drivers/net
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Diffstat (limited to 'drivers/natsemi.c')
-rw-r--r--drivers/natsemi.c882
1 files changed, 0 insertions, 882 deletions
diff --git a/drivers/natsemi.c b/drivers/natsemi.c
deleted file mode 100644
index 075d6c5..0000000
--- a/drivers/natsemi.c
+++ /dev/null
@@ -1,882 +0,0 @@
-/*
- natsemi.c: A U-Boot driver for the NatSemi DP8381x series.
- Author: Mark A. Rakes (mark_rakes@vivato.net)
-
- Adapted from an Etherboot driver written by:
-
- Copyright (C) 2001 Entity Cyber, Inc.
-
- This development of this Etherboot driver was funded by
-
- Sicom Systems: http://www.sicompos.com/
-
- Author: Marty Connor (mdc@thinguin.org)
- Adapted from a Linux driver which was written by Donald Becker
-
- This software may be used and distributed according to the terms
- of the GNU Public License (GPL), incorporated herein by reference.
-
- Original Copyright Notice:
-
- Written/copyright 1999-2001 by Donald Becker.
-
- This software may be used and distributed according to the terms of
- the GNU General Public License (GPL), incorporated herein by reference.
- Drivers based on or derived from this code fall under the GPL and must
- retain the authorship, copyright and license notice. This file is not
- a complete program and may only be used when the entire operating
- system is licensed under the GPL. License for under other terms may be
- available. Contact the original author for details.
-
- The original author may be reached as becker@scyld.com, or at
- Scyld Computing Corporation
- 410 Severn Ave., Suite 210
- Annapolis MD 21403
-
- Support information and updates available at
- http://www.scyld.com/network/netsemi.html
-
- References:
- http://www.scyld.com/expert/100mbps.html
- http://www.scyld.com/expert/NWay.html
- Datasheet is available from:
- http://www.national.com/pf/DP/DP83815.html
-*/
-
-/* Revision History
- * October 2002 mar 1.0
- * Initial U-Boot Release. Tested with Netgear FA311 board
- * and dp83815 chipset on custom board
-*/
-
-/* Includes */
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <asm/io.h>
-#include <pci.h>
-
-#if defined(CONFIG_CMD_NET) \
- && defined(CONFIG_NET_MULTI) && defined(CONFIG_NATSEMI)
-
-/* defines */
-#define EEPROM_SIZE 0xb /*12 16-bit chunks, or 24 bytes*/
-
-#define DSIZE 0x00000FFF
-#define ETH_ALEN 6
-#define CRC_SIZE 4
-#define TOUT_LOOP 500000
-#define TX_BUF_SIZE 1536
-#define RX_BUF_SIZE 1536
-#define NUM_RX_DESC 4 /* Number of Rx descriptor registers. */
-
-/* Offsets to the device registers.
- Unlike software-only systems, device drivers interact with complex hardware.
- It's not useful to define symbolic names for every register bit in the
- device. */
-enum register_offsets {
- ChipCmd = 0x00,
- ChipConfig = 0x04,
- EECtrl = 0x08,
- IntrMask = 0x14,
- IntrEnable = 0x18,
- TxRingPtr = 0x20,
- TxConfig = 0x24,
- RxRingPtr = 0x30,
- RxConfig = 0x34,
- ClkRun = 0x3C,
- RxFilterAddr = 0x48,
- RxFilterData = 0x4C,
- SiliconRev = 0x58,
- PCIPM = 0x44,
- BasicControl = 0x80,
- BasicStatus = 0x84,
- /* These are from the spec, around page 78... on a separate table. */
- PGSEL = 0xCC,
- PMDCSR = 0xE4,
- TSTDAT = 0xFC,
- DSPCFG = 0xF4,
- SDCFG = 0x8C
-};
-
-/* Bit in ChipCmd. */
-enum ChipCmdBits {
- ChipReset = 0x100,
- RxReset = 0x20,
- TxReset = 0x10,
- RxOff = 0x08,
- RxOn = 0x04,
- TxOff = 0x02,
- TxOn = 0x01
-};
-
-enum ChipConfigBits {
- LinkSts = 0x80000000,
- HundSpeed = 0x40000000,
- FullDuplex = 0x20000000,
- TenPolarity = 0x10000000,
- AnegDone = 0x08000000,
- AnegEnBothBoth = 0x0000E000,
- AnegDis100Full = 0x0000C000,
- AnegEn100Both = 0x0000A000,
- AnegDis100Half = 0x00008000,
- AnegEnBothHalf = 0x00006000,
- AnegDis10Full = 0x00004000,
- AnegEn10Both = 0x00002000,
- DuplexMask = 0x00008000,
- SpeedMask = 0x00004000,
- AnegMask = 0x00002000,
- AnegDis10Half = 0x00000000,
- ExtPhy = 0x00001000,
- PhyRst = 0x00000400,
- PhyDis = 0x00000200,
- BootRomDisable = 0x00000004,
- BEMode = 0x00000001,
-};
-
-enum TxConfig_bits {
- TxDrthMask = 0x3f,
- TxFlthMask = 0x3f00,
- TxMxdmaMask = 0x700000,
- TxMxdma_512 = 0x0,
- TxMxdma_4 = 0x100000,
- TxMxdma_8 = 0x200000,
- TxMxdma_16 = 0x300000,
- TxMxdma_32 = 0x400000,
- TxMxdma_64 = 0x500000,
- TxMxdma_128 = 0x600000,
- TxMxdma_256 = 0x700000,
- TxCollRetry = 0x800000,
- TxAutoPad = 0x10000000,
- TxMacLoop = 0x20000000,
- TxHeartIgn = 0x40000000,
- TxCarrierIgn = 0x80000000
-};
-
-enum RxConfig_bits {
- RxDrthMask = 0x3e,
- RxMxdmaMask = 0x700000,
- RxMxdma_512 = 0x0,
- RxMxdma_4 = 0x100000,
- RxMxdma_8 = 0x200000,
- RxMxdma_16 = 0x300000,
- RxMxdma_32 = 0x400000,
- RxMxdma_64 = 0x500000,
- RxMxdma_128 = 0x600000,
- RxMxdma_256 = 0x700000,
- RxAcceptLong = 0x8000000,
- RxAcceptTx = 0x10000000,
- RxAcceptRunt = 0x40000000,
- RxAcceptErr = 0x80000000
-};
-
-/* Bits in the RxMode register. */
-enum rx_mode_bits {
- AcceptErr = 0x20,
- AcceptRunt = 0x10,
- AcceptBroadcast = 0xC0000000,
- AcceptMulticast = 0x00200000,
- AcceptAllMulticast = 0x20000000,
- AcceptAllPhys = 0x10000000,
- AcceptMyPhys = 0x08000000
-};
-
-typedef struct _BufferDesc {
- u32 link;
- vu_long cmdsts;
- u32 bufptr;
- u32 software_use;
-} BufferDesc;
-
-/* Bits in network_desc.status */
-enum desc_status_bits {
- DescOwn = 0x80000000, DescMore = 0x40000000, DescIntr = 0x20000000,
- DescNoCRC = 0x10000000, DescPktOK = 0x08000000,
- DescSizeMask = 0xfff,
-
- DescTxAbort = 0x04000000, DescTxFIFO = 0x02000000,
- DescTxCarrier = 0x01000000, DescTxDefer = 0x00800000,
- DescTxExcDefer = 0x00400000, DescTxOOWCol = 0x00200000,
- DescTxExcColl = 0x00100000, DescTxCollCount = 0x000f0000,
-
- DescRxAbort = 0x04000000, DescRxOver = 0x02000000,
- DescRxDest = 0x01800000, DescRxLong = 0x00400000,
- DescRxRunt = 0x00200000, DescRxInvalid = 0x00100000,
- DescRxCRC = 0x00080000, DescRxAlign = 0x00040000,
- DescRxLoop = 0x00020000, DesRxColl = 0x00010000,
-};
-
-/* Globals */
-#ifdef NATSEMI_DEBUG
-static int natsemi_debug = 0; /* 1 verbose debugging, 0 normal */
-#endif
-static u32 SavedClkRun;
-static unsigned int cur_rx;
-static unsigned int advertising;
-static unsigned int rx_config;
-static unsigned int tx_config;
-
-/* Note: transmit and receive buffers and descriptors must be
- longword aligned */
-static BufferDesc txd __attribute__ ((aligned(4)));
-static BufferDesc rxd[NUM_RX_DESC] __attribute__ ((aligned(4)));
-
-static unsigned char txb[TX_BUF_SIZE] __attribute__ ((aligned(4)));
-static unsigned char rxb[NUM_RX_DESC * RX_BUF_SIZE]
- __attribute__ ((aligned(4)));
-
-/* Function Prototypes */
-#if 0
-static void write_eeprom(struct eth_device *dev, long addr, int location,
- short value);
-#endif
-static int read_eeprom(struct eth_device *dev, long addr, int location);
-static int mdio_read(struct eth_device *dev, int phy_id, int location);
-static int natsemi_init(struct eth_device *dev, bd_t * bis);
-static void natsemi_reset(struct eth_device *dev);
-static void natsemi_init_rxfilter(struct eth_device *dev);
-static void natsemi_init_txd(struct eth_device *dev);
-static void natsemi_init_rxd(struct eth_device *dev);
-static void natsemi_set_rx_mode(struct eth_device *dev);
-static void natsemi_check_duplex(struct eth_device *dev);
-static int natsemi_send(struct eth_device *dev, volatile void *packet,
- int length);
-static int natsemi_poll(struct eth_device *dev);
-static void natsemi_disable(struct eth_device *dev);
-
-static struct pci_device_id supported[] = {
- {PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815},
- {}
-};
-
-#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
-#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
-
-static inline int
-INW(struct eth_device *dev, u_long addr)
-{
- return le16_to_cpu(*(vu_short *) (addr + dev->iobase));
-}
-
-static int
-INL(struct eth_device *dev, u_long addr)
-{
- return le32_to_cpu(*(vu_long *) (addr + dev->iobase));
-}
-
-static inline void
-OUTW(struct eth_device *dev, int command, u_long addr)
-{
- *(vu_short *) ((addr + dev->iobase)) = cpu_to_le16(command);
-}
-
-static inline void
-OUTL(struct eth_device *dev, int command, u_long addr)
-{
- *(vu_long *) ((addr + dev->iobase)) = cpu_to_le32(command);
-}
-
-/*
- * Function: natsemi_initialize
- *
- * Description: Retrieves the MAC address of the card, and sets up some
- * globals required by other routines, and initializes the NIC, making it
- * ready to send and receive packets.
- *
- * Side effects:
- * leaves the natsemi initialized, and ready to recieve packets.
- *
- * Returns: struct eth_device *: pointer to NIC data structure
- */
-
-int
-natsemi_initialize(bd_t * bis)
-{
- pci_dev_t devno;
- int card_number = 0;
- struct eth_device *dev;
- u32 iobase, status, chip_config;
- int i, idx = 0;
- int prev_eedata;
- u32 tmp;
-
- while (1) {
- /* Find PCI device(s) */
- if ((devno = pci_find_devices(supported, idx++)) < 0) {
- break;
- }
-
- pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase);
- iobase &= ~0x3; /* bit 1: unused and bit 0: I/O Space Indicator */
-
- pci_write_config_dword(devno, PCI_COMMAND,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-
- /* Check if I/O accesses and Bus Mastering are enabled. */
- pci_read_config_dword(devno, PCI_COMMAND, &status);
- if (!(status & PCI_COMMAND_MEMORY)) {
- printf("Error: Can not enable MEM access.\n");
- continue;
- } else if (!(status & PCI_COMMAND_MASTER)) {
- printf("Error: Can not enable Bus Mastering.\n");
- continue;
- }
-
- dev = (struct eth_device *) malloc(sizeof *dev);
-
- sprintf(dev->name, "dp83815#%d", card_number);
- dev->iobase = bus_to_phys(iobase);
-#ifdef NATSEMI_DEBUG
- printf("natsemi: NatSemi ns8381[56] @ %#x\n", dev->iobase);
-#endif
- dev->priv = (void *) devno;
- dev->init = natsemi_init;
- dev->halt = natsemi_disable;
- dev->send = natsemi_send;
- dev->recv = natsemi_poll;
-
- eth_register(dev);
-
- card_number++;
-
- /* Set the latency timer for value. */
- pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);
-
- udelay(10 * 1000);
-
- /* natsemi has a non-standard PM control register
- * in PCI config space. Some boards apparently need
- * to be brought to D0 in this manner. */
- pci_read_config_dword(devno, PCIPM, &tmp);
- if (tmp & (0x03 | 0x100)) {
- /* D0 state, disable PME assertion */
- u32 newtmp = tmp & ~(0x03 | 0x100);
- pci_write_config_dword(devno, PCIPM, newtmp);
- }
-
- printf("natsemi: EEPROM contents:\n");
- for (i = 0; i <= EEPROM_SIZE; i++) {
- short eedata = read_eeprom(dev, EECtrl, i);
- printf(" %04hx", eedata);
- }
- printf("\n");
-
- /* get MAC address */
- prev_eedata = read_eeprom(dev, EECtrl, 6);
- for (i = 0; i < 3; i++) {
- int eedata = read_eeprom(dev, EECtrl, i + 7);
- dev->enetaddr[i*2] = (eedata << 1) + (prev_eedata >> 15);
- dev->enetaddr[i*2+1] = eedata >> 7;
- prev_eedata = eedata;
- }
-
- /* Reset the chip to erase any previous misconfiguration. */
- OUTL(dev, ChipReset, ChipCmd);
-
- advertising = mdio_read(dev, 1, 4);
- chip_config = INL(dev, ChipConfig);
-#ifdef NATSEMI_DEBUG
- printf("%s: Transceiver status %#08X advertising %#08X\n",
- dev->name, (int) INL(dev, BasicStatus), advertising);
- printf("%s: Transceiver default autoneg. %s 10%s %s duplex.\n",
- dev->name, chip_config & AnegMask ? "enabled, advertise" :
- "disabled, force", chip_config & SpeedMask ? "0" : "",
- chip_config & DuplexMask ? "full" : "half");
-#endif
- chip_config |= AnegEnBothBoth;
-#ifdef NATSEMI_DEBUG
- printf("%s: changed to autoneg. %s 10%s %s duplex.\n",
- dev->name, chip_config & AnegMask ? "enabled, advertise" :
- "disabled, force", chip_config & SpeedMask ? "0" : "",
- chip_config & DuplexMask ? "full" : "half");
-#endif
- /*write new autoneg bits, reset phy*/
- OUTL(dev, (chip_config | PhyRst), ChipConfig);
- /*un-reset phy*/
- OUTL(dev, chip_config, ChipConfig);
-
- /* Disable PME:
- * The PME bit is initialized from the EEPROM contents.
- * PCI cards probably have PME disabled, but motherboard
- * implementations may have PME set to enable WakeOnLan.
- * With PME set the chip will scan incoming packets but
- * nothing will be written to memory. */
- SavedClkRun = INL(dev, ClkRun);
- OUTL(dev, SavedClkRun & ~0x100, ClkRun);
- }
- return card_number;
-}
-
-/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.
- The EEPROM code is for common 93c06/46 EEPROMs w/ 6bit addresses. */
-
-/* Delay between EEPROM clock transitions.
- No extra delay is needed with 33Mhz PCI, but future 66Mhz
- access may need a delay. */
-#define eeprom_delay(ee_addr) INL(dev, ee_addr)
-
-enum EEPROM_Ctrl_Bits {
- EE_ShiftClk = 0x04,
- EE_DataIn = 0x01,
- EE_ChipSelect = 0x08,
- EE_DataOut = 0x02
-};
-
-#define EE_Write0 (EE_ChipSelect)
-#define EE_Write1 (EE_ChipSelect | EE_DataIn)
-/* The EEPROM commands include the alway-set leading bit. */
-enum EEPROM_Cmds {
- EE_WrEnCmd = (4 << 6), EE_WriteCmd = (5 << 6),
- EE_ReadCmd = (6 << 6), EE_EraseCmd = (7 << 6),
-};
-
-#if 0
-static void
-write_eeprom(struct eth_device *dev, long addr, int location, short value)
-{
- int i;
- int ee_addr = (typeof(ee_addr))addr;
- short wren_cmd = EE_WrEnCmd | 0x30; /*wren is 100 + 11XXXX*/
- short write_cmd = location | EE_WriteCmd;
-
-#ifdef NATSEMI_DEBUG
- printf("write_eeprom: %08x, %04hx, %04hx\n",
- dev->iobase + ee_addr, write_cmd, value);
-#endif
- /* Shift the write enable command bits out. */
- for (i = 9; i >= 0; i--) {
- short cmdval = (wren_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
- OUTL(dev, cmdval, ee_addr);
- eeprom_delay(ee_addr);
- OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
- eeprom_delay(ee_addr);
- }
-
- OUTL(dev, 0, ee_addr); /*bring chip select low*/
- OUTL(dev, EE_ShiftClk, ee_addr);
- eeprom_delay(ee_addr);
-
- /* Shift the write command bits out. */
- for (i = 9; i >= 0; i--) {
- short cmdval = (write_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
- OUTL(dev, cmdval, ee_addr);
- eeprom_delay(ee_addr);
- OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
- eeprom_delay(ee_addr);
- }
-
- for (i = 0; i < 16; i++) {
- short cmdval = (value & (1 << i)) ? EE_Write1 : EE_Write0;
- OUTL(dev, cmdval, ee_addr);
- eeprom_delay(ee_addr);
- OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
- eeprom_delay(ee_addr);
- }
-
- OUTL(dev, 0, ee_addr); /*bring chip select low*/
- OUTL(dev, EE_ShiftClk, ee_addr);
- for (i = 0; i < 200000; i++) {
- OUTL(dev, EE_Write0, ee_addr); /*poll for done*/
- if (INL(dev, ee_addr) & EE_DataOut) {
- break; /*finished*/
- }
- }
- eeprom_delay(ee_addr);
-
- /* Terminate the EEPROM access. */
- OUTL(dev, EE_Write0, ee_addr);
- OUTL(dev, 0, ee_addr);
- return;
-}
-#endif
-
-static int
-read_eeprom(struct eth_device *dev, long addr, int location)
-{
- int i;
- int retval = 0;
- int ee_addr = (typeof(ee_addr))addr;
- int read_cmd = location | EE_ReadCmd;
-
- OUTL(dev, EE_Write0, ee_addr);
-
- /* Shift the read command bits out. */
- for (i = 10; i >= 0; i--) {
- short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
- OUTL(dev, dataval, ee_addr);
- eeprom_delay(ee_addr);
- OUTL(dev, dataval | EE_ShiftClk, ee_addr);
- eeprom_delay(ee_addr);
- }
- OUTL(dev, EE_ChipSelect, ee_addr);
- eeprom_delay(ee_addr);
-
- for (i = 0; i < 16; i++) {
- OUTL(dev, EE_ChipSelect | EE_ShiftClk, ee_addr);
- eeprom_delay(ee_addr);
- retval |= (INL(dev, ee_addr) & EE_DataOut) ? 1 << i : 0;
- OUTL(dev, EE_ChipSelect, ee_addr);
- eeprom_delay(ee_addr);
- }
-
- /* Terminate the EEPROM access. */
- OUTL(dev, EE_Write0, ee_addr);
- OUTL(dev, 0, ee_addr);
-#ifdef NATSEMI_DEBUG
- if (natsemi_debug)
- printf("read_eeprom: %08x, %08x, retval %08x\n",
- dev->iobase + ee_addr, read_cmd, retval);
-#endif
- return retval;
-}
-
-/* MII transceiver control section.
- The 83815 series has an internal transceiver, and we present the
- management registers as if they were MII connected. */
-
-static int
-mdio_read(struct eth_device *dev, int phy_id, int location)
-{
- if (phy_id == 1 && location < 32)
- return INL(dev, BasicControl+(location<<2))&0xffff;
- else
- return 0xffff;
-}
-
-/* Function: natsemi_init
- *
- * Description: resets the ethernet controller chip and configures
- * registers and data structures required for sending and receiving packets.
- *
- * Arguments: struct eth_device *dev: NIC data structure
- *
- * returns: int.
- */
-
-static int
-natsemi_init(struct eth_device *dev, bd_t * bis)
-{
-
- natsemi_reset(dev);
-
- /* Disable PME:
- * The PME bit is initialized from the EEPROM contents.
- * PCI cards probably have PME disabled, but motherboard
- * implementations may have PME set to enable WakeOnLan.
- * With PME set the chip will scan incoming packets but
- * nothing will be written to memory. */
- OUTL(dev, SavedClkRun & ~0x100, ClkRun);
-
- natsemi_init_rxfilter(dev);
- natsemi_init_txd(dev);
- natsemi_init_rxd(dev);
-
- /* Configure the PCI bus bursts and FIFO thresholds. */
- tx_config = TxAutoPad | TxCollRetry | TxMxdma_256 | (0x1002);
- rx_config = RxMxdma_256 | 0x20;
-
-#ifdef NATSEMI_DEBUG
- printf("%s: Setting TxConfig Register %#08X\n", dev->name, tx_config);
- printf("%s: Setting RxConfig Register %#08X\n", dev->name, rx_config);
-#endif
- OUTL(dev, tx_config, TxConfig);
- OUTL(dev, rx_config, RxConfig);
-
- natsemi_check_duplex(dev);
- natsemi_set_rx_mode(dev);
-
- OUTL(dev, (RxOn | TxOn), ChipCmd);
- return 1;
-}
-
-/*
- * Function: natsemi_reset
- *
- * Description: soft resets the controller chip
- *
- * Arguments: struct eth_device *dev: NIC data structure
- *
- * Returns: void.
- */
-static void
-natsemi_reset(struct eth_device *dev)
-{
- OUTL(dev, ChipReset, ChipCmd);
-
- /* On page 78 of the spec, they recommend some settings for "optimum
- performance" to be done in sequence. These settings optimize some
- of the 100Mbit autodetection circuitry. Also, we only want to do
- this for rev C of the chip. */
- if (INL(dev, SiliconRev) == 0x302) {
- OUTW(dev, 0x0001, PGSEL);
- OUTW(dev, 0x189C, PMDCSR);
- OUTW(dev, 0x0000, TSTDAT);
- OUTW(dev, 0x5040, DSPCFG);
- OUTW(dev, 0x008C, SDCFG);
- }
- /* Disable interrupts using the mask. */
- OUTL(dev, 0, IntrMask);
- OUTL(dev, 0, IntrEnable);
-}
-
-/* Function: natsemi_init_rxfilter
- *
- * Description: sets receive filter address to our MAC address
- *
- * Arguments: struct eth_device *dev: NIC data structure
- *
- * returns: void.
- */
-
-static void
-natsemi_init_rxfilter(struct eth_device *dev)
-{
- int i;
-
- for (i = 0; i < ETH_ALEN; i += 2) {
- OUTL(dev, i, RxFilterAddr);
- OUTW(dev, dev->enetaddr[i] + (dev->enetaddr[i + 1] << 8),
- RxFilterData);
- }
-}
-
-/*
- * Function: natsemi_init_txd
- *
- * Description: initializes the Tx descriptor
- *
- * Arguments: struct eth_device *dev: NIC data structure
- *
- * returns: void.
- */
-
-static void
-natsemi_init_txd(struct eth_device *dev)
-{
- txd.link = (u32) 0;
- txd.cmdsts = (u32) 0;
- txd.bufptr = (u32) & txb[0];
-
- /* load Transmit Descriptor Register */
- OUTL(dev, (u32) & txd, TxRingPtr);
-#ifdef NATSEMI_DEBUG
- printf("natsemi_init_txd: TX descriptor reg loaded with: %#08X\n",
- INL(dev, TxRingPtr));
-#endif
-}
-
-/* Function: natsemi_init_rxd
- *
- * Description: initializes the Rx descriptor ring
- *
- * Arguments: struct eth_device *dev: NIC data structure
- *
- * Returns: void.
- */
-
-static void
-natsemi_init_rxd(struct eth_device *dev)
-{
- int i;
-
- cur_rx = 0;
-
- /* init RX descriptor */
- for (i = 0; i < NUM_RX_DESC; i++) {
- rxd[i].link =
- cpu_to_le32((i + 1 <
- NUM_RX_DESC) ? (u32) & rxd[i +
- 1] : (u32) &
- rxd[0]);
- rxd[i].cmdsts = cpu_to_le32((u32) RX_BUF_SIZE);
- rxd[i].bufptr = cpu_to_le32((u32) & rxb[i * RX_BUF_SIZE]);
-#ifdef NATSEMI_DEBUG
- printf
- ("natsemi_init_rxd: rxd[%d]=%p link=%X cmdsts=%lX bufptr=%X\n",
- i, &rxd[i], le32_to_cpu(rxd[i].link),
- rxd[i].cmdsts, rxd[i].bufptr);
-#endif
- }
-
- /* load Receive Descriptor Register */
- OUTL(dev, (u32) & rxd[0], RxRingPtr);
-
-#ifdef NATSEMI_DEBUG
- printf("natsemi_init_rxd: RX descriptor register loaded with: %X\n",
- INL(dev, RxRingPtr));
-#endif
-}
-
-/* Function: natsemi_set_rx_mode
- *
- * Description:
- * sets the receive mode to accept all broadcast packets and packets
- * with our MAC address, and reject all multicast packets.
- *
- * Arguments: struct eth_device *dev: NIC data structure
- *
- * Returns: void.
- */
-
-static void
-natsemi_set_rx_mode(struct eth_device *dev)
-{
- u32 rx_mode = AcceptBroadcast | AcceptMyPhys;
-
- OUTL(dev, rx_mode, RxFilterAddr);
-}
-
-static void
-natsemi_check_duplex(struct eth_device *dev)
-{
- int duplex = INL(dev, ChipConfig) & FullDuplex ? 1 : 0;
-
-#ifdef NATSEMI_DEBUG
- printf("%s: Setting %s-duplex based on negotiated link"
- " capability.\n", dev->name, duplex ? "full" : "half");
-#endif
- if (duplex) {
- rx_config |= RxAcceptTx;
- tx_config |= (TxCarrierIgn | TxHeartIgn);
- } else {
- rx_config &= ~RxAcceptTx;
- tx_config &= ~(TxCarrierIgn | TxHeartIgn);
- }
- OUTL(dev, tx_config, TxConfig);
- OUTL(dev, rx_config, RxConfig);
-}
-
-/* Function: natsemi_send
- *
- * Description: transmits a packet and waits for completion or timeout.
- *
- * Returns: void. */
-static int
-natsemi_send(struct eth_device *dev, volatile void *packet, int length)
-{
- u32 i, status = 0;
- u32 tx_status = 0;
- vu_long *res = (vu_long *)&tx_status;
-
- /* Stop the transmitter */
- OUTL(dev, TxOff, ChipCmd);
-
-#ifdef NATSEMI_DEBUG
- if (natsemi_debug)
- printf("natsemi_send: sending %d bytes\n", (int) length);
-#endif
-
- /* set the transmit buffer descriptor and enable Transmit State Machine */
- txd.link = cpu_to_le32(0);
- txd.bufptr = cpu_to_le32(phys_to_bus((u32) packet));
- txd.cmdsts = cpu_to_le32(DescOwn | length);
-
- /* load Transmit Descriptor Register */
- OUTL(dev, phys_to_bus((u32) & txd), TxRingPtr);
-#ifdef NATSEMI_DEBUG
- if (natsemi_debug)
- printf("natsemi_send: TX descriptor register loaded with: %#08X\n",
- INL(dev, TxRingPtr));
-#endif
- /* restart the transmitter */
- OUTL(dev, TxOn, ChipCmd);
-
- for (i = 0;
- (*res = le32_to_cpu(txd.cmdsts)) & DescOwn;
- i++) {
- if (i >= TOUT_LOOP) {
- printf
- ("%s: tx error buffer not ready: txd.cmdsts == %#X\n",
- dev->name, tx_status);
- goto Done;
- }
- }
-
- if (!(tx_status & DescPktOK)) {
- printf("natsemi_send: Transmit error, Tx status %X.\n",
- tx_status);
- goto Done;
- }
-
- status = 1;
- Done:
- return status;
-}
-
-/* Function: natsemi_poll
- *
- * Description: checks for a received packet and returns it if found.
- *
- * Arguments: struct eth_device *dev: NIC data structure
- *
- * Returns: 1 if packet was received.
- * 0 if no packet was received.
- *
- * Side effects:
- * Returns (copies) the packet to the array dev->packet.
- * Returns the length of the packet.
- */
-
-static int
-natsemi_poll(struct eth_device *dev)
-{
- int retstat = 0;
- int length = 0;
- u32 rx_status = le32_to_cpu(rxd[cur_rx].cmdsts);
-
- if (!(rx_status & (u32) DescOwn))
- return retstat;
-#ifdef NATSEMI_DEBUG
- if (natsemi_debug)
- printf("natsemi_poll: got a packet: cur_rx:%d, status:%X\n",
- cur_rx, rx_status);
-#endif
- length = (rx_status & DSIZE) - CRC_SIZE;
-
- if ((rx_status & (DescMore | DescPktOK | DescRxLong)) != DescPktOK) {
- printf
- ("natsemi_poll: Corrupted packet received, buffer status = %X\n",
- rx_status);
- retstat = 0;
- } else { /* give packet to higher level routine */
- NetReceive((rxb + cur_rx * RX_BUF_SIZE), length);
- retstat = 1;
- }
-
- /* return the descriptor and buffer to receive ring */
- rxd[cur_rx].cmdsts = cpu_to_le32(RX_BUF_SIZE);
- rxd[cur_rx].bufptr = cpu_to_le32((u32) & rxb[cur_rx * RX_BUF_SIZE]);
-
- if (++cur_rx == NUM_RX_DESC)
- cur_rx = 0;
-
- /* re-enable the potentially idle receive state machine */
- OUTL(dev, RxOn, ChipCmd);
-
- return retstat;
-}
-
-/* Function: natsemi_disable
- *
- * Description: Turns off interrupts and stops Tx and Rx engines
- *
- * Arguments: struct eth_device *dev: NIC data structure
- *
- * Returns: void.
- */
-
-static void
-natsemi_disable(struct eth_device *dev)
-{
- /* Disable interrupts using the mask. */
- OUTL(dev, 0, IntrMask);
- OUTL(dev, 0, IntrEnable);
-
- /* Stop the chip's Tx and Rx processes. */
- OUTL(dev, RxOff | TxOff, ChipCmd);
-
- /* Restore PME enable bit */
- OUTL(dev, SavedClkRun, ClkRun);
-}
-
-#endif