summaryrefslogtreecommitdiff
path: root/drivers/natsemi.c
diff options
context:
space:
mode:
authorwdenk <wdenk>2002-11-03 00:38:21 +0000
committerwdenk <wdenk>2002-11-03 00:38:21 +0000
commitfe8c2806cdba70479e351299881a395dc2be7785 (patch)
treea1e8b98a1838cba6e6f5c765d9d85339257c45f5 /drivers/natsemi.c
parentf9087a3213cc245cf9b90436475b5af822bd7579 (diff)
downloadu-boot-imx-fe8c2806cdba70479e351299881a395dc2be7785.zip
u-boot-imx-fe8c2806cdba70479e351299881a395dc2be7785.tar.gz
u-boot-imx-fe8c2806cdba70479e351299881a395dc2be7785.tar.bz2
Initial revision
Diffstat (limited to 'drivers/natsemi.c')
-rw-r--r--drivers/natsemi.c881
1 files changed, 881 insertions, 0 deletions
diff --git a/drivers/natsemi.c b/drivers/natsemi.c
new file mode 100644
index 0000000..5a8c5b4
--- /dev/null
+++ b/drivers/natsemi.c
@@ -0,0 +1,881 @@
+/*
+ natsemi.c: A U-Boot driver for the NatSemi DP8381x series.
+ Author: Mark A. Rakes (mark_rakes@vivato.net)
+
+ Adapted from an Etherboot driver written by:
+
+ Copyright (C) 2001 Entity Cyber, Inc.
+
+ This development of this Etherboot driver was funded by
+
+ Sicom Systems: http://www.sicompos.com/
+
+ Author: Marty Connor (mdc@thinguin.org)
+ Adapted from a Linux driver which was written by Donald Becker
+
+ This software may be used and distributed according to the terms
+ of the GNU Public License (GPL), incorporated herein by reference.
+
+ Original Copyright Notice:
+
+ Written/copyright 1999-2001 by Donald Becker.
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License (GPL), incorporated herein by reference.
+ Drivers based on or derived from this code fall under the GPL and must
+ retain the authorship, copyright and license notice. This file is not
+ a complete program and may only be used when the entire operating
+ system is licensed under the GPL. License for under other terms may be
+ available. Contact the original author for details.
+
+ The original author may be reached as becker@scyld.com, or at
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+ Support information and updates available at
+ http://www.scyld.com/network/netsemi.html
+
+ References:
+ http://www.scyld.com/expert/100mbps.html
+ http://www.scyld.com/expert/NWay.html
+ Datasheet is available from:
+ http://www.national.com/pf/DP/DP83815.html
+*/
+
+/* Revision History
+ * October 2002 mar 1.0
+ * Initial U-Boot Release. Tested with Netgear FA311 board
+ * and dp83815 chipset on custom board
+*/
+
+/* Includes */
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+ defined(CONFIG_NATSEMI)
+
+/* defines */
+#define EEPROM_SIZE 0xb /*12 16-bit chunks, or 24 bytes*/
+
+#define DSIZE 0x00000FFF
+#define ETH_ALEN 6
+#define CRC_SIZE 4
+#define TOUT_LOOP 500000
+#define TX_BUF_SIZE 1536
+#define RX_BUF_SIZE 1536
+#define NUM_RX_DESC 4 /* Number of Rx descriptor registers. */
+
+/* Offsets to the device registers.
+ Unlike software-only systems, device drivers interact with complex hardware.
+ It's not useful to define symbolic names for every register bit in the
+ device. */
+enum register_offsets {
+ ChipCmd = 0x00,
+ ChipConfig = 0x04,
+ EECtrl = 0x08,
+ IntrMask = 0x14,
+ IntrEnable = 0x18,
+ TxRingPtr = 0x20,
+ TxConfig = 0x24,
+ RxRingPtr = 0x30,
+ RxConfig = 0x34,
+ ClkRun = 0x3C,
+ RxFilterAddr = 0x48,
+ RxFilterData = 0x4C,
+ SiliconRev = 0x58,
+ PCIPM = 0x44,
+ BasicControl = 0x80,
+ BasicStatus = 0x84,
+ /* These are from the spec, around page 78... on a separate table. */
+ PGSEL = 0xCC,
+ PMDCSR = 0xE4,
+ TSTDAT = 0xFC,
+ DSPCFG = 0xF4,
+ SDCFG = 0x8C
+};
+
+/* Bit in ChipCmd. */
+enum ChipCmdBits {
+ ChipReset = 0x100,
+ RxReset = 0x20,
+ TxReset = 0x10,
+ RxOff = 0x08,
+ RxOn = 0x04,
+ TxOff = 0x02,
+ TxOn = 0x01
+};
+
+enum ChipConfigBits {
+ LinkSts = 0x80000000,
+ HundSpeed = 0x40000000,
+ FullDuplex = 0x20000000,
+ TenPolarity = 0x10000000,
+ AnegDone = 0x08000000,
+ AnegEnBothBoth = 0x0000E000,
+ AnegDis100Full = 0x0000C000,
+ AnegEn100Both = 0x0000A000,
+ AnegDis100Half = 0x00008000,
+ AnegEnBothHalf = 0x00006000,
+ AnegDis10Full = 0x00004000,
+ AnegEn10Both = 0x00002000,
+ DuplexMask = 0x00008000,
+ SpeedMask = 0x00004000,
+ AnegMask = 0x00002000,
+ AnegDis10Half = 0x00000000,
+ ExtPhy = 0x00001000,
+ PhyRst = 0x00000400,
+ PhyDis = 0x00000200,
+ BootRomDisable = 0x00000004,
+ BEMode = 0x00000001,
+};
+
+enum TxConfig_bits {
+ TxDrthMask = 0x3f,
+ TxFlthMask = 0x3f00,
+ TxMxdmaMask = 0x700000,
+ TxMxdma_512 = 0x0,
+ TxMxdma_4 = 0x100000,
+ TxMxdma_8 = 0x200000,
+ TxMxdma_16 = 0x300000,
+ TxMxdma_32 = 0x400000,
+ TxMxdma_64 = 0x500000,
+ TxMxdma_128 = 0x600000,
+ TxMxdma_256 = 0x700000,
+ TxCollRetry = 0x800000,
+ TxAutoPad = 0x10000000,
+ TxMacLoop = 0x20000000,
+ TxHeartIgn = 0x40000000,
+ TxCarrierIgn = 0x80000000
+};
+
+enum RxConfig_bits {
+ RxDrthMask = 0x3e,
+ RxMxdmaMask = 0x700000,
+ RxMxdma_512 = 0x0,
+ RxMxdma_4 = 0x100000,
+ RxMxdma_8 = 0x200000,
+ RxMxdma_16 = 0x300000,
+ RxMxdma_32 = 0x400000,
+ RxMxdma_64 = 0x500000,
+ RxMxdma_128 = 0x600000,
+ RxMxdma_256 = 0x700000,
+ RxAcceptLong = 0x8000000,
+ RxAcceptTx = 0x10000000,
+ RxAcceptRunt = 0x40000000,
+ RxAcceptErr = 0x80000000
+};
+
+/* Bits in the RxMode register. */
+enum rx_mode_bits {
+ AcceptErr = 0x20,
+ AcceptRunt = 0x10,
+ AcceptBroadcast = 0xC0000000,
+ AcceptMulticast = 0x00200000,
+ AcceptAllMulticast = 0x20000000,
+ AcceptAllPhys = 0x10000000,
+ AcceptMyPhys = 0x08000000
+};
+
+typedef struct _BufferDesc {
+ u32 link;
+ vu_long cmdsts;
+ u32 bufptr;
+ u32 software_use;
+} BufferDesc;
+
+/* Bits in network_desc.status */
+enum desc_status_bits {
+ DescOwn = 0x80000000, DescMore = 0x40000000, DescIntr = 0x20000000,
+ DescNoCRC = 0x10000000, DescPktOK = 0x08000000,
+ DescSizeMask = 0xfff,
+
+ DescTxAbort = 0x04000000, DescTxFIFO = 0x02000000,
+ DescTxCarrier = 0x01000000, DescTxDefer = 0x00800000,
+ DescTxExcDefer = 0x00400000, DescTxOOWCol = 0x00200000,
+ DescTxExcColl = 0x00100000, DescTxCollCount = 0x000f0000,
+
+ DescRxAbort = 0x04000000, DescRxOver = 0x02000000,
+ DescRxDest = 0x01800000, DescRxLong = 0x00400000,
+ DescRxRunt = 0x00200000, DescRxInvalid = 0x00100000,
+ DescRxCRC = 0x00080000, DescRxAlign = 0x00040000,
+ DescRxLoop = 0x00020000, DesRxColl = 0x00010000,
+};
+
+/* Globals */
+#ifdef NATSEMI_DEBUG
+static int natsemi_debug = 0; /* 1 verbose debugging, 0 normal */
+#endif
+static u32 SavedClkRun;
+static unsigned int cur_rx;
+static unsigned int advertising;
+static unsigned int rx_config;
+static unsigned int tx_config;
+
+/* Note: transmit and receive buffers and descriptors must be
+ longword aligned */
+static BufferDesc txd __attribute__ ((aligned(4)));
+static BufferDesc rxd[NUM_RX_DESC] __attribute__ ((aligned(4)));
+
+static unsigned char txb[TX_BUF_SIZE] __attribute__ ((aligned(4)));
+static unsigned char rxb[NUM_RX_DESC * RX_BUF_SIZE]
+ __attribute__ ((aligned(4)));
+
+/* Function Prototypes */
+#if 0
+static void write_eeprom(struct eth_device *dev, long addr, int location,
+ short value);
+#endif
+static int read_eeprom(struct eth_device *dev, long addr, int location);
+static int mdio_read(struct eth_device *dev, int phy_id, int location);
+static int natsemi_init(struct eth_device *dev, bd_t * bis);
+static void natsemi_reset(struct eth_device *dev);
+static void natsemi_init_rxfilter(struct eth_device *dev);
+static void natsemi_init_txd(struct eth_device *dev);
+static void natsemi_init_rxd(struct eth_device *dev);
+static void natsemi_set_rx_mode(struct eth_device *dev);
+static void natsemi_check_duplex(struct eth_device *dev);
+static int natsemi_send(struct eth_device *dev, volatile void *packet,
+ int length);
+static int natsemi_poll(struct eth_device *dev);
+static void natsemi_disable(struct eth_device *dev);
+
+static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815},
+ {}
+};
+
+#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
+#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
+
+static inline int
+INW(struct eth_device *dev, u_long addr)
+{
+ return le16_to_cpu(*(vu_short *) (addr + dev->iobase));
+}
+
+static int
+INL(struct eth_device *dev, u_long addr)
+{
+ return le32_to_cpu(*(vu_long *) (addr + dev->iobase));
+}
+
+static inline void
+OUTW(struct eth_device *dev, int command, u_long addr)
+{
+ *(vu_short *) ((addr + dev->iobase)) = cpu_to_le16(command);
+}
+
+static inline void
+OUTL(struct eth_device *dev, int command, u_long addr)
+{
+ *(vu_long *) ((addr + dev->iobase)) = cpu_to_le32(command);
+}
+
+/*
+ * Function: natsemi_initialize
+ *
+ * Description: Retrieves the MAC address of the card, and sets up some
+ * globals required by other routines, and initializes the NIC, making it
+ * ready to send and receive packets.
+ *
+ * Side effects:
+ * leaves the natsemi initialized, and ready to recieve packets.
+ *
+ * Returns: struct eth_device *: pointer to NIC data structure
+ */
+
+int
+natsemi_initialize(bd_t * bis)
+{
+ pci_dev_t devno;
+ int card_number = 0;
+ struct eth_device *dev;
+ u32 iobase, status, chip_config;
+ int i, idx = 0;
+ int prev_eedata;
+ u32 tmp;
+
+ while (1) {
+ /* Find PCI device(s) */
+ if ((devno = pci_find_devices(supported, idx++)) < 0) {
+ break;
+ }
+
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase);
+ iobase &= ~0x3; /* 1: unused and 0:I/O Space Indicator */
+
+ pci_write_config_dword(devno, PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+ /* Check if I/O accesses and Bus Mastering are enabled. */
+ pci_read_config_dword(devno, PCI_COMMAND, &status);
+ if (!(status & PCI_COMMAND_MEMORY)) {
+ printf("Error: Can not enable MEM access.\n");
+ continue;
+ } else if (!(status & PCI_COMMAND_MASTER)) {
+ printf("Error: Can not enable Bus Mastering.\n");
+ continue;
+ }
+
+ dev = (struct eth_device *) malloc(sizeof *dev);
+
+ sprintf(dev->name, "dp83815#%d", card_number);
+ dev->iobase = bus_to_phys(iobase);
+#ifdef NATSEMI_DEBUG
+ printf("natsemi: NatSemi ns8381[56] @ %#x\n", dev->iobase);
+#endif
+ dev->priv = (void *) devno;
+ dev->init = natsemi_init;
+ dev->halt = natsemi_disable;
+ dev->send = natsemi_send;
+ dev->recv = natsemi_poll;
+
+ eth_register(dev);
+
+ card_number++;
+
+ /* Set the latency timer for value. */
+ pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);
+
+ udelay(10 * 1000);
+
+ /* natsemi has a non-standard PM control register
+ * in PCI config space. Some boards apparently need
+ * to be brought to D0 in this manner. */
+ pci_read_config_dword(devno, PCIPM, &tmp);
+ if (tmp & (0x03 | 0x100)) {
+ /* D0 state, disable PME assertion */
+ u32 newtmp = tmp & ~(0x03 | 0x100);
+ pci_write_config_dword(devno, PCIPM, newtmp);
+ }
+
+ printf("natsemi: EEPROM contents:\n");
+ for (i = 0; i <= EEPROM_SIZE; i++) {
+ short eedata = read_eeprom(dev, EECtrl, i);
+ printf(" %04hx", eedata);
+ }
+ printf("\n");
+
+ /* get MAC address */
+ prev_eedata = read_eeprom(dev, EECtrl, 6);
+ for (i = 0; i < 3; i++) {
+ int eedata = read_eeprom(dev, EECtrl, i + 7);
+ dev->enetaddr[i*2] = (eedata << 1) + (prev_eedata >> 15);
+ dev->enetaddr[i*2+1] = eedata >> 7;
+ prev_eedata = eedata;
+ }
+
+ /* Reset the chip to erase any previous misconfiguration. */
+ OUTL(dev, ChipReset, ChipCmd);
+
+ advertising = mdio_read(dev, 1, 4);
+ chip_config = INL(dev, ChipConfig);
+#ifdef NATSEMI_DEBUG
+ printf("%s: Transceiver status %#08X advertising %#08X\n",
+ dev->name, (int) INL(dev, BasicStatus), advertising);
+ printf("%s: Transceiver default autoneg. %s 10%s %s duplex.\n",
+ dev->name, chip_config & AnegMask ? "enabled, advertise" :
+ "disabled, force", chip_config & SpeedMask ? "0" : "",
+ chip_config & DuplexMask ? "full" : "half");
+#endif
+ chip_config |= AnegEnBothBoth;
+#ifdef NATSEMI_DEBUG
+ printf("%s: changed to autoneg. %s 10%s %s duplex.\n",
+ dev->name, chip_config & AnegMask ? "enabled, advertise" :
+ "disabled, force", chip_config & SpeedMask ? "0" : "",
+ chip_config & DuplexMask ? "full" : "half");
+#endif
+ /*write new autoneg bits, reset phy*/
+ OUTL(dev, (chip_config | PhyRst), ChipConfig);
+ /*un-reset phy*/
+ OUTL(dev, chip_config, ChipConfig);
+
+ /* Disable PME:
+ * The PME bit is initialized from the EEPROM contents.
+ * PCI cards probably have PME disabled, but motherboard
+ * implementations may have PME set to enable WakeOnLan.
+ * With PME set the chip will scan incoming packets but
+ * nothing will be written to memory. */
+ SavedClkRun = INL(dev, ClkRun);
+ OUTL(dev, SavedClkRun & ~0x100, ClkRun);
+ }
+ return card_number;
+}
+
+/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.
+ The EEPROM code is for common 93c06/46 EEPROMs w/ 6bit addresses. */
+
+/* Delay between EEPROM clock transitions.
+ No extra delay is needed with 33Mhz PCI, but future 66Mhz
+ access may need a delay. */
+#define eeprom_delay(ee_addr) INL(dev, ee_addr)
+
+enum EEPROM_Ctrl_Bits {
+ EE_ShiftClk = 0x04,
+ EE_DataIn = 0x01,
+ EE_ChipSelect = 0x08,
+ EE_DataOut = 0x02
+};
+
+#define EE_Write0 (EE_ChipSelect)
+#define EE_Write1 (EE_ChipSelect | EE_DataIn)
+/* The EEPROM commands include the alway-set leading bit. */
+enum EEPROM_Cmds {
+ EE_WrEnCmd = (4 << 6), EE_WriteCmd = (5 << 6),
+ EE_ReadCmd = (6 << 6), EE_EraseCmd = (7 << 6),
+};
+
+#if 0
+static void
+write_eeprom(struct eth_device *dev, long addr, int location, short value)
+{
+ int i;
+ int ee_addr = (typeof(ee_addr))addr;
+ short wren_cmd = EE_WrEnCmd | 0x30; /*wren is 100 + 11XXXX*/
+ short write_cmd = location | EE_WriteCmd;
+
+#ifdef NATSEMI_DEBUG
+ printf("write_eeprom: %08x, %04hx, %04hx\n",
+ dev->iobase + ee_addr, write_cmd, value);
+#endif
+ /* Shift the write enable command bits out. */
+ for (i = 9; i >= 0; i--) {
+ short cmdval = (wren_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+ OUTL(dev, cmdval, ee_addr);
+ eeprom_delay(ee_addr);
+ OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
+ eeprom_delay(ee_addr);
+ }
+
+ OUTL(dev, 0, ee_addr); /*bring chip select low*/
+ OUTL(dev, EE_ShiftClk, ee_addr);
+ eeprom_delay(ee_addr);
+
+ /* Shift the write command bits out. */
+ for (i = 9; i >= 0; i--) {
+ short cmdval = (write_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+ OUTL(dev, cmdval, ee_addr);
+ eeprom_delay(ee_addr);
+ OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
+ eeprom_delay(ee_addr);
+ }
+
+ for (i = 0; i < 16; i++) {
+ short cmdval = (value & (1 << i)) ? EE_Write1 : EE_Write0;
+ OUTL(dev, cmdval, ee_addr);
+ eeprom_delay(ee_addr);
+ OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
+ eeprom_delay(ee_addr);
+ }
+
+ OUTL(dev, 0, ee_addr); /*bring chip select low*/
+ OUTL(dev, EE_ShiftClk, ee_addr);
+ for (i = 0; i < 200000; i++) {
+ OUTL(dev, EE_Write0, ee_addr); /*poll for done*/
+ if (INL(dev, ee_addr) & EE_DataOut) {
+ break; /*finished*/
+ }
+ }
+ eeprom_delay(ee_addr);
+
+ /* Terminate the EEPROM access. */
+ OUTL(dev, EE_Write0, ee_addr);
+ OUTL(dev, 0, ee_addr);
+ return;
+}
+#endif
+
+static int
+read_eeprom(struct eth_device *dev, long addr, int location)
+{
+ int i;
+ int retval = 0;
+ int ee_addr = (typeof(ee_addr))addr;
+ int read_cmd = location | EE_ReadCmd;
+
+ OUTL(dev, EE_Write0, ee_addr);
+
+ /* Shift the read command bits out. */
+ for (i = 10; i >= 0; i--) {
+ short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+ OUTL(dev, dataval, ee_addr);
+ eeprom_delay(ee_addr);
+ OUTL(dev, dataval | EE_ShiftClk, ee_addr);
+ eeprom_delay(ee_addr);
+ }
+ OUTL(dev, EE_ChipSelect, ee_addr);
+ eeprom_delay(ee_addr);
+
+ for (i = 0; i < 16; i++) {
+ OUTL(dev, EE_ChipSelect | EE_ShiftClk, ee_addr);
+ eeprom_delay(ee_addr);
+ retval |= (INL(dev, ee_addr) & EE_DataOut) ? 1 << i : 0;
+ OUTL(dev, EE_ChipSelect, ee_addr);
+ eeprom_delay(ee_addr);
+ }
+
+ /* Terminate the EEPROM access. */
+ OUTL(dev, EE_Write0, ee_addr);
+ OUTL(dev, 0, ee_addr);
+#ifdef NATSEMI_DEBUG
+ if (natsemi_debug)
+ printf("read_eeprom: %08x, %08x, retval %08x\n",
+ dev->iobase + ee_addr, read_cmd, retval);
+#endif
+ return retval;
+}
+
+/* MII transceiver control section.
+ The 83815 series has an internal transceiver, and we present the
+ management registers as if they were MII connected. */
+
+static int
+mdio_read(struct eth_device *dev, int phy_id, int location)
+{
+ if (phy_id == 1 && location < 32)
+ return INL(dev, BasicControl+(location<<2))&0xffff;
+ else
+ return 0xffff;
+}
+
+/* Function: natsemi_init
+ *
+ * Description: resets the ethernet controller chip and configures
+ * registers and data structures required for sending and receiving packets.
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * returns: int.
+ */
+
+static int
+natsemi_init(struct eth_device *dev, bd_t * bis)
+{
+
+ natsemi_reset(dev);
+
+ /* Disable PME:
+ * The PME bit is initialized from the EEPROM contents.
+ * PCI cards probably have PME disabled, but motherboard
+ * implementations may have PME set to enable WakeOnLan.
+ * With PME set the chip will scan incoming packets but
+ * nothing will be written to memory. */
+ OUTL(dev, SavedClkRun & ~0x100, ClkRun);
+
+ natsemi_init_rxfilter(dev);
+ natsemi_init_txd(dev);
+ natsemi_init_rxd(dev);
+
+ /* Configure the PCI bus bursts and FIFO thresholds. */
+ tx_config = TxAutoPad | TxCollRetry | TxMxdma_256 | (0x1002);
+ rx_config = RxMxdma_256 | 0x20;
+
+#ifdef NATSEMI_DEBUG
+ printf("%s: Setting TxConfig Register %#08X\n", dev->name, tx_config);
+ printf("%s: Setting RxConfig Register %#08X\n", dev->name, rx_config);
+#endif
+ OUTL(dev, tx_config, TxConfig);
+ OUTL(dev, rx_config, RxConfig);
+
+ natsemi_check_duplex(dev);
+ natsemi_set_rx_mode(dev);
+
+ OUTL(dev, (RxOn | TxOn), ChipCmd);
+ return 1;
+}
+
+/*
+ * Function: natsemi_reset
+ *
+ * Description: soft resets the controller chip
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * Returns: void.
+ */
+static void
+natsemi_reset(struct eth_device *dev)
+{
+ OUTL(dev, ChipReset, ChipCmd);
+
+ /* On page 78 of the spec, they recommend some settings for "optimum
+ performance" to be done in sequence. These settings optimize some
+ of the 100Mbit autodetection circuitry. Also, we only want to do
+ this for rev C of the chip. */
+ if (INL(dev, SiliconRev) == 0x302) {
+ OUTW(dev, 0x0001, PGSEL);
+ OUTW(dev, 0x189C, PMDCSR);
+ OUTW(dev, 0x0000, TSTDAT);
+ OUTW(dev, 0x5040, DSPCFG);
+ OUTW(dev, 0x008C, SDCFG);
+ }
+ /* Disable interrupts using the mask. */
+ OUTL(dev, 0, IntrMask);
+ OUTL(dev, 0, IntrEnable);
+}
+
+/* Function: natsemi_init_rxfilter
+ *
+ * Description: sets receive filter address to our MAC address
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * returns: void.
+ */
+
+static void
+natsemi_init_rxfilter(struct eth_device *dev)
+{
+ int i;
+
+ for (i = 0; i < ETH_ALEN; i += 2) {
+ OUTL(dev, i, RxFilterAddr);
+ OUTW(dev, dev->enetaddr[i] + (dev->enetaddr[i + 1] << 8),
+ RxFilterData);
+ }
+}
+
+/*
+ * Function: natsemi_init_txd
+ *
+ * Description: initializes the Tx descriptor
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * returns: void.
+ */
+
+static void
+natsemi_init_txd(struct eth_device *dev)
+{
+ txd.link = (u32) 0;
+ txd.cmdsts = (u32) 0;
+ txd.bufptr = (u32) & txb[0];
+
+ /* load Transmit Descriptor Register */
+ OUTL(dev, (u32) & txd, TxRingPtr);
+#ifdef NATSEMI_DEBUG
+ printf("natsemi_init_txd: TX descriptor reg loaded with: %#08X\n",
+ INL(dev, TxRingPtr));
+#endif
+}
+
+/* Function: natsemi_init_rxd
+ *
+ * Description: initializes the Rx descriptor ring
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * Returns: void.
+ */
+
+static void
+natsemi_init_rxd(struct eth_device *dev)
+{
+ int i;
+
+ cur_rx = 0;
+
+ /* init RX descriptor */
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ rxd[i].link =
+ cpu_to_le32((i + 1 <
+ NUM_RX_DESC) ? (u32) & rxd[i +
+ 1] : (u32) &
+ rxd[0]);
+ rxd[i].cmdsts = cpu_to_le32((u32) RX_BUF_SIZE);
+ rxd[i].bufptr = cpu_to_le32((u32) & rxb[i * RX_BUF_SIZE]);
+#ifdef NATSEMI_DEBUG
+ printf
+ ("natsemi_init_rxd: rxd[%d]=%p link=%X cmdsts=%lX bufptr=%X\n",
+ i, &rxd[i], le32_to_cpu(rxd[i].link),
+ rxd[i].cmdsts, rxd[i].bufptr);
+#endif
+ }
+
+ /* load Receive Descriptor Register */
+ OUTL(dev, (u32) & rxd[0], RxRingPtr);
+
+#ifdef NATSEMI_DEBUG
+ printf("natsemi_init_rxd: RX descriptor register loaded with: %X\n",
+ INL(dev, RxRingPtr));
+#endif
+}
+
+/* Function: natsemi_set_rx_mode
+ *
+ * Description:
+ * sets the receive mode to accept all broadcast packets and packets
+ * with our MAC address, and reject all multicast packets.
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * Returns: void.
+ */
+
+static void
+natsemi_set_rx_mode(struct eth_device *dev)
+{
+ u32 rx_mode = AcceptBroadcast | AcceptMyPhys;
+
+ OUTL(dev, rx_mode, RxFilterAddr);
+}
+
+static void
+natsemi_check_duplex(struct eth_device *dev)
+{
+ int duplex = INL(dev, ChipConfig) & FullDuplex ? 1 : 0;
+
+#ifdef NATSEMI_DEBUG
+ printf("%s: Setting %s-duplex based on negotiated link"
+ " capability.\n", dev->name, duplex ? "full" : "half");
+#endif
+ if (duplex) {
+ rx_config |= RxAcceptTx;
+ tx_config |= (TxCarrierIgn | TxHeartIgn);
+ } else {
+ rx_config &= ~RxAcceptTx;
+ tx_config &= ~(TxCarrierIgn | TxHeartIgn);
+ }
+ OUTL(dev, tx_config, TxConfig);
+ OUTL(dev, rx_config, RxConfig);
+}
+
+/* Function: natsemi_send
+ *
+ * Description: transmits a packet and waits for completion or timeout.
+ *
+ * Returns: void. */
+static int
+natsemi_send(struct eth_device *dev, volatile void *packet, int length)
+{
+ u32 i, status = 0;
+ u32 tx_status = 0;
+
+ /* Stop the transmitter */
+ OUTL(dev, TxOff, ChipCmd);
+
+#ifdef NATSEMI_DEBUG
+ if (natsemi_debug)
+ printf("natsemi_send: sending %d bytes\n", (int) length);
+#endif
+
+ /* set the transmit buffer descriptor and enable Transmit State Machine */
+ txd.link = cpu_to_le32(0);
+ txd.bufptr = cpu_to_le32(phys_to_bus((u32) packet));
+ txd.cmdsts = cpu_to_le32(DescOwn | length);
+
+ /* load Transmit Descriptor Register */
+ OUTL(dev, phys_to_bus((u32) & txd), TxRingPtr);
+#ifdef NATSEMI_DEBUG
+ if (natsemi_debug)
+ printf("natsemi_send: TX descriptor register loaded with: %#08X\n",
+ INL(dev, TxRingPtr));
+#endif
+ /* restart the transmitter */
+ OUTL(dev, TxOn, ChipCmd);
+
+ for (i = 0;
+ ((vu_long)tx_status = le32_to_cpu(txd.cmdsts)) & DescOwn;
+ i++) {
+ if (i >= TOUT_LOOP) {
+ printf
+ ("%s: tx error buffer not ready: txd.cmdsts == %#X\n",
+ dev->name, tx_status);
+ goto Done;
+ }
+ }
+
+ if (!(tx_status & DescPktOK)) {
+ printf("natsemi_send: Transmit error, Tx status %X.\n",
+ tx_status);
+ goto Done;
+ }
+
+ status = 1;
+ Done:
+ return status;
+}
+
+/* Function: natsemi_poll
+ *
+ * Description: checks for a received packet and returns it if found.
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * Returns: 1 if packet was received.
+ * 0 if no packet was received.
+ *
+ * Side effects:
+ * Returns (copies) the packet to the array dev->packet.
+ * Returns the length of the packet.
+ */
+
+static int
+natsemi_poll(struct eth_device *dev)
+{
+ int retstat = 0;
+ int length = 0;
+ u32 rx_status = le32_to_cpu(rxd[cur_rx].cmdsts);
+
+ if (!(rx_status & (u32) DescOwn))
+ return retstat;
+#ifdef NATSEMI_DEBUG
+ if (natsemi_debug)
+ printf("natsemi_poll: got a packet: cur_rx:%d, status:%X\n",
+ cur_rx, rx_status);
+#endif
+ length = (rx_status & DSIZE) - CRC_SIZE;
+
+ if ((rx_status & (DescMore | DescPktOK | DescRxLong)) != DescPktOK) {
+ printf
+ ("natsemi_poll: Corrupted packet received, buffer status = %X\n",
+ rx_status);
+ retstat = 0;
+ } else { /* give packet to higher level routine */
+ NetReceive((rxb + cur_rx * RX_BUF_SIZE), length);
+ retstat = 1;
+ }
+
+ /* return the descriptor and buffer to receive ring */
+ rxd[cur_rx].cmdsts = cpu_to_le32(RX_BUF_SIZE);
+ rxd[cur_rx].bufptr = cpu_to_le32((u32) & rxb[cur_rx * RX_BUF_SIZE]);
+
+ if (++cur_rx == NUM_RX_DESC)
+ cur_rx = 0;
+
+ /* re-enable the potentially idle receive state machine */
+ OUTL(dev, RxOn, ChipCmd);
+
+ return retstat;
+}
+
+/* Function: natsemi_disable
+ *
+ * Description: Turns off interrupts and stops Tx and Rx engines
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * Returns: void.
+ */
+
+static void
+natsemi_disable(struct eth_device *dev)
+{
+ /* Disable interrupts using the mask. */
+ OUTL(dev, 0, IntrMask);
+ OUTL(dev, 0, IntrEnable);
+
+ /* Stop the chip's Tx and Rx processes. */
+ OUTL(dev, RxOff | TxOff, ChipCmd);
+
+ /* Restore PME enable bit */
+ OUTL(dev, SavedClkRun, ClkRun);
+}
+
+#endif