summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2013-03-14 05:32:50 +0000
committerMarek Vasut <marex@denx.de>2013-04-10 15:22:22 +0200
commitc39d6a0ea57d57b53bd7fb8933874e1640e47888 (patch)
treec3e91d95b7fa285301973278ca4cb2b31ab8c621 /drivers/mtd
parenta24c3155db20f979f9a0aa758d4665f221e470b9 (diff)
downloadu-boot-imx-c39d6a0ea57d57b53bd7fb8933874e1640e47888.zip
u-boot-imx-c39d6a0ea57d57b53bd7fb8933874e1640e47888.tar.gz
u-boot-imx-c39d6a0ea57d57b53bd7fb8933874e1640e47888.tar.bz2
nand: Extend nand_(read|write)_skip_bad with *actual and limit parameters
We make these two functions take a size_t pointer to how much space was used on NAND to read or write the buffer (when reads/writes happen) so that bad blocks can be accounted for. We also make them take an loff_t limit on how much data can be read or written. This means that we can now catch the case of when writing to a partition would exceed the partition size due to bad blocks. To do this we also need to make check_skip_len count not just complete blocks used but partial ones as well. All callers of nand_(read|write)_skip_bad are adjusted to call these with the most sensible limits available. The changes were started by Pantelis and finished by Tom. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/nand_util.c68
1 files changed, 60 insertions, 8 deletions
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index ff2d348..4727f9c 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -416,11 +416,13 @@ int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length,
* @param nand NAND device
* @param offset offset in flash
* @param length image length
+ * @param used length of flash needed for the requested length
* @return 0 if the image fits and there are no bad blocks
* 1 if the image fits, but there are bad blocks
* -1 if the image does not fit
*/
-static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length)
+static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length,
+ size_t *used)
{
size_t len_excl_bad = 0;
int ret = 0;
@@ -442,8 +444,13 @@ static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length)
ret = 1;
offset += block_len;
+ *used += block_len;
}
+ /* If the length is not a multiple of block_len, adjust. */
+ if (len_excl_bad > length)
+ *used -= (len_excl_bad - length);
+
return ret;
}
@@ -476,23 +483,36 @@ static size_t drop_ffs(const nand_info_t *nand, const u_char *buf,
* Write image to NAND flash.
* Blocks that are marked bad are skipped and the is written to the next
* block instead as long as the image is short enough to fit even after
- * skipping the bad blocks.
+ * skipping the bad blocks. Due to bad blocks we may not be able to
+ * perform the requested write. In the case where the write would
+ * extend beyond the end of the NAND device, both length and actual (if
+ * not NULL) are set to 0. In the case where the write would extend
+ * beyond the limit we are passed, length is set to 0 and actual is set
+ * to the required length.
*
* @param nand NAND device
* @param offset offset in flash
* @param length buffer length
+ * @param actual set to size required to write length worth of
+ * buffer or 0 on error, if not NULL
+ * @param lim maximum size that actual may be in order to not
+ * exceed the buffer
* @param buffer buffer to read from
* @param flags flags modifying the behaviour of the write to NAND
* @return 0 in case of success
*/
int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
- u_char *buffer, int flags)
+ size_t *actual, loff_t lim, u_char *buffer, int flags)
{
int rval = 0, blocksize;
size_t left_to_write = *length;
+ size_t used_for_write = 0;
u_char *p_buffer = buffer;
int need_skip;
+ if (actual)
+ *actual = 0;
+
#ifdef CONFIG_CMD_NAND_YAFFS
if (flags & WITH_YAFFS_OOB) {
if (flags & ~WITH_YAFFS_OOB)
@@ -529,13 +549,23 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
return -EINVAL;
}
- need_skip = check_skip_len(nand, offset, *length);
+ need_skip = check_skip_len(nand, offset, *length, &used_for_write);
+
+ if (actual)
+ *actual = used_for_write;
+
if (need_skip < 0) {
printf("Attempt to write outside the flash area\n");
*length = 0;
return -EINVAL;
}
+ if (used_for_write > lim) {
+ puts("Size of write exceeds partition or device limit\n");
+ *length = 0;
+ return -EFBIG;
+ }
+
if (!need_skip && !(flags & WITH_DROP_FFS)) {
rval = nand_write(nand, offset, length, buffer);
if (rval == 0)
@@ -626,36 +656,58 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
*
* Read image from NAND flash.
* Blocks that are marked bad are skipped and the next block is read
- * instead as long as the image is short enough to fit even after skipping the
- * bad blocks.
+ * instead as long as the image is short enough to fit even after
+ * skipping the bad blocks. Due to bad blocks we may not be able to
+ * perform the requested read. In the case where the read would extend
+ * beyond the end of the NAND device, both length and actual (if not
+ * NULL) are set to 0. In the case where the read would extend beyond
+ * the limit we are passed, length is set to 0 and actual is set to the
+ * required length.
*
* @param nand NAND device
* @param offset offset in flash
* @param length buffer length, on return holds number of read bytes
+ * @param actual set to size required to read length worth of buffer or 0
+ * on error, if not NULL
+ * @param lim maximum size that actual may be in order to not exceed the
+ * buffer
* @param buffer buffer to write to
* @return 0 in case of success
*/
int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
- u_char *buffer)
+ size_t *actual, loff_t lim, u_char *buffer)
{
int rval;
size_t left_to_read = *length;
+ size_t used_for_read = 0;
u_char *p_buffer = buffer;
int need_skip;
if ((offset & (nand->writesize - 1)) != 0) {
printf("Attempt to read non page-aligned data\n");
*length = 0;
+ if (actual)
+ *actual = 0;
return -EINVAL;
}
- need_skip = check_skip_len(nand, offset, *length);
+ need_skip = check_skip_len(nand, offset, *length, &used_for_read);
+
+ if (actual)
+ *actual = used_for_read;
+
if (need_skip < 0) {
printf("Attempt to read outside the flash area\n");
*length = 0;
return -EINVAL;
}
+ if (used_for_read > lim) {
+ puts("Size of read exceeds partition or device limit\n");
+ *length = 0;
+ return -EFBIG;
+ }
+
if (!need_skip) {
rval = nand_read(nand, offset, length, buffer);
if (!rval || rval == -EUCLEAN)