summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
authorWolfgang Grandegger <wg@grandegger.com>2008-06-05 13:02:29 +0200
committerAndrew Fleming-AFLEMING <afleming@freescale.com>2008-06-10 18:22:26 -0500
commita75a57ef6e4b613c81434971e96ed70cf9ec9ba0 (patch)
tree22d096483fa0373540b251fd1e6e4261ab7f27a5 /drivers/mtd
parent6beecfbb542992eede5831240cd58678274683a9 (diff)
downloadu-boot-imx-a75a57ef6e4b613c81434971e96ed70cf9ec9ba0.zip
u-boot-imx-a75a57ef6e4b613c81434971e96ed70cf9ec9ba0.tar.gz
u-boot-imx-a75a57ef6e4b613c81434971e96ed70cf9ec9ba0.tar.bz2
NAND FSL UPM: driver re-write using the hwcontrol callback
This is a re-write of the NAND FSL UPM driver using the more universal hwcontrol callback (instead of the cmdfunc callback). Here is a brief list of furher modifications: - For the time being, the UPM setup writing the UPM array has been removed from the driver and must now be done by the board specific code. - The bus width definition in "struct fsl_upm_nand" is now in bits to comply with the corresponding Linux driver and 8, 16 and 32 bit accesses are supported. - chip->dev_read is only set if fun->dev_ready != NULL, which is required for boards not connecting the R/B pin. - A few issue have been fixed with MxMR bit manipulation like in the corresponding Linux driver. Note: I think the "io_addr" field of "struct fsl_upm" could be removed as well, because the address is already determined by "nand->IO_ADDR_[RW]", but I'm not 100% sure. This patch has been tested on a TQM8548 modules with the NAND chip Micron MT29F8G08FABWP. This patch is based on the following patches posted to this list a few minutes ago: PPC: add accessor macros to clear and set bits in one shot 83xx/85xx/86xx: add more MxMR local bus definitions Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/fsl_upm.c128
1 files changed, 46 insertions, 82 deletions
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 5cc410a..67ae9c8 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -20,112 +20,83 @@
#include <linux/mtd/fsl_upm.h>
#include <nand.h>
-#define FSL_UPM_MxMR_OP_NO (0 << 28) /* normal operation */
-#define FSL_UPM_MxMR_OP_WA (1 << 28) /* write array */
-#define FSL_UPM_MxMR_OP_RA (2 << 28) /* read array */
-#define FSL_UPM_MxMR_OP_RP (3 << 28) /* run pattern */
+static int fsl_upm_in_pattern;
static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset)
{
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_RP | pat_offset);
+ clrsetbits_be32(upm->mxmr, MxMR_MAD_MSK, MxMR_OP_RUNP | pat_offset);
}
static void fsl_upm_end_pattern(struct fsl_upm *upm)
{
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO);
- while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO)
+ clrbits_be32(upm->mxmr, MxMR_OP_RUNP);
+
+ while (in_be32(upm->mxmr) & MxMR_OP_RUNP)
eieio();
}
static void fsl_upm_run_pattern(struct fsl_upm *upm, int width, u32 cmd)
{
- out_be32(upm->mar, cmd << (32 - width * 8));
- out_8(upm->io_addr, 0x0);
-}
-
-static void fsl_upm_setup(struct fsl_upm *upm)
-{
- int i;
-
- /* write upm array */
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_WA);
-
- for (i = 0; i < 64; i++) {
- out_be32(upm->mdr, upm->array[i]);
+ out_be32(upm->mar, cmd << (32 - width));
+ switch (width) {
+ case 8:
out_8(upm->io_addr, 0x0);
+ break;
+ case 16:
+ out_be16(upm->io_addr, 0x0);
+ break;
+ case 32:
+ out_be32(upm->io_addr, 0x0);
+ break;
}
-
- /* normal operation */
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO);
- while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO)
- eieio();
}
-static void fun_cmdfunc(struct mtd_info *mtd, unsigned command, int column,
- int page_addr)
+static void nand_hwcontrol (struct mtd_info *mtd, int cmd)
{
struct nand_chip *chip = mtd->priv;
struct fsl_upm_nand *fun = chip->priv;
- fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
-
- if (command == NAND_CMD_SEQIN) {
- int readcmd;
-
- if (column >= mtd->oobblock) {
- /* OOB area */
- column -= mtd->oobblock;
- readcmd = NAND_CMD_READOOB;
- } else if (column < 256) {
- /* First 256 bytes --> READ0 */
- readcmd = NAND_CMD_READ0;
- } else {
- column -= 256;
- readcmd = NAND_CMD_READ1;
- }
- fsl_upm_run_pattern(&fun->upm, fun->width, readcmd);
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
+ fsl_upm_in_pattern++;
+ break;
+ case NAND_CTL_SETALE:
+ fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
+ fsl_upm_in_pattern++;
+ break;
+ case NAND_CTL_CLRCLE:
+ case NAND_CTL_CLRALE:
+ fsl_upm_end_pattern(&fun->upm);
+ fsl_upm_in_pattern--;
+ break;
}
+}
- fsl_upm_run_pattern(&fun->upm, fun->width, command);
-
- fsl_upm_end_pattern(&fun->upm);
-
- fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
-
- if (column != -1)
- fsl_upm_run_pattern(&fun->upm, fun->width, column);
+static void nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+ struct nand_chip *chip = mtd->priv;
- if (page_addr != -1) {
- fsl_upm_run_pattern(&fun->upm, fun->width, page_addr);
- fsl_upm_run_pattern(&fun->upm, fun->width,
- (page_addr >> 8) & 0xFF);
- if (chip->chipsize > (32 << 20)) {
- fsl_upm_run_pattern(&fun->upm, fun->width,
- (page_addr >> 16) & 0x0f);
- }
- }
+ if (fsl_upm_in_pattern) {
+ struct fsl_upm_nand *fun = chip->priv;
- fsl_upm_end_pattern(&fun->upm);
+ fsl_upm_run_pattern(&fun->upm, fun->width, byte);
- if (fun->wait_pattern) {
/*
* Some boards/chips needs this. At least on MPC8360E-RDK we
* need it. Probably weird chip, because I don't see any need
* for this on MPC8555E + Samsung K9F1G08U0A. Usually here are
* 0-2 unexpected busy states per block read.
*/
- while (!fun->dev_ready())
- debug("unexpected busy state\n");
+ if (fun->wait_pattern) {
+ while (!fun->dev_ready())
+ debug("unexpected busy state\n");
+ }
+ } else {
+ out_8(chip->IO_ADDR_W, byte);
}
}
-static void nand_write_byte(struct mtd_info *mtd, u_char byte)
-{
- struct nand_chip *chip = mtd->priv;
-
- out_8(chip->IO_ADDR_W, byte);
-}
-
static u8 nand_read_byte(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
@@ -164,10 +135,6 @@ static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
return 0;
}
-static void nand_hwcontrol(struct mtd_info *mtd, int cmd)
-{
-}
-
static int nand_dev_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
@@ -178,23 +145,20 @@ static int nand_dev_ready(struct mtd_info *mtd)
int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
{
- /* yet only 8 bit accessors implemented */
- if (fun->width != 1)
+ if (fun->width != 8 && fun->width != 16 && fun->width != 32)
return -ENOSYS;
- fsl_upm_setup(&fun->upm);
-
chip->priv = fun;
chip->chip_delay = fun->chip_delay;
chip->eccmode = NAND_ECC_SOFT;
- chip->cmdfunc = fun_cmdfunc;
chip->hwcontrol = nand_hwcontrol;
chip->read_byte = nand_read_byte;
chip->read_buf = nand_read_buf;
chip->write_byte = nand_write_byte;
chip->write_buf = nand_write_buf;
chip->verify_buf = nand_verify_buf;
- chip->dev_ready = nand_dev_ready;
+ if (fun->dev_ready)
+ chip->dev_ready = nand_dev_ready;
return 0;
}