summaryrefslogtreecommitdiff
path: root/drivers/mtd/st_smi.c
diff options
context:
space:
mode:
authorAmit Virdi <amit.virdi@st.com>2012-05-07 13:00:29 +0530
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-07-07 14:07:39 +0200
commitb5992fac88f8068f4f1af1de2e76889465e45693 (patch)
treeb45d04b77763d821cb52873f8c154e13ad035c4b /drivers/mtd/st_smi.c
parentcf9026deb8d83b00c37b19ec7b63491e9338d49f (diff)
downloadu-boot-imx-b5992fac88f8068f4f1af1de2e76889465e45693.zip
u-boot-imx-b5992fac88f8068f4f1af1de2e76889465e45693.tar.gz
u-boot-imx-b5992fac88f8068f4f1af1de2e76889465e45693.tar.bz2
st_smi: Change timeout loop implementation
There are two problems in the current timeout loop implementation: 1. In case initial test failing, there will always be a delay of 1 ms 2. The delay duration is not tunable The new implementation addresses both these limitations. Signed-off-by: Amit Virdi <amit.virdi@st.com> Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'drivers/mtd/st_smi.c')
-rw-r--r--drivers/mtd/st_smi.c27
1 files changed, 17 insertions, 10 deletions
diff --git a/drivers/mtd/st_smi.c b/drivers/mtd/st_smi.c
index 5378b57..75ae9aa 100644
--- a/drivers/mtd/st_smi.c
+++ b/drivers/mtd/st_smi.c
@@ -102,11 +102,15 @@ static struct flash_device flash_devices[] = {
*/
static int smi_wait_xfer_finish(int timeout)
{
- do {
+ ulong start = get_timer(0);
+
+ while (get_timer(start) < timeout) {
if (readl(&smicntl->smi_sr) & TFF)
return 0;
- udelay(1000);
- } while (timeout--);
+
+ /* Try after 10 ms */
+ udelay(10);
+ };
return -1;
}
@@ -219,16 +223,17 @@ static int smi_read_sr(int bank)
static int smi_wait_till_ready(int bank, int timeout)
{
int sr;
+ ulong start = get_timer(0);
/* One chip guarantees max 5 msec wait here after page writes,
but potentially three seconds (!) after page erase. */
- do {
+ while (get_timer(start) < timeout) {
sr = smi_read_sr(bank);
if ((sr >= 0) && (!(sr & WIP_BIT)))
return 0;
- /* Try again after 1m-sec */
- udelay(1000);
+ /* Try again after 10 usec */
+ udelay(10);
} while (timeout--);
printf("SMI controller is still in wait, timeout=%d\n", timeout);
@@ -245,6 +250,7 @@ static int smi_wait_till_ready(int bank, int timeout)
static int smi_write_enable(int bank)
{
u32 ctrlreg1;
+ u32 start;
int timeout = WMODE_TOUT;
int sr;
@@ -263,14 +269,15 @@ static int smi_write_enable(int bank)
/* Restore the CTRL REG1 state */
writel(ctrlreg1, &smicntl->smi_cr1);
- do {
+ start = get_timer(0);
+ while (get_timer(start) < timeout) {
sr = smi_read_sr(bank);
if ((sr >= 0) && (sr & (1 << (bank + WM_SHIFT))))
return 0;
- /* Try again after 1m-sec */
- udelay(1000);
- } while (timeout--);
+ /* Try again after 10 usec */
+ udelay(10);
+ };
return -1;
}