summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
authorStefan Agner <stefan@agner.ch>2015-05-08 19:07:11 +0200
committerScott Wood <scottwood@freescale.com>2015-05-24 14:27:28 -0500
commit5519194d4f6ba3c1aeea2f07f444cc936913560a (patch)
tree2667e696bf6336145ef94b50c5278713e3e36c59 /drivers/mtd/nand
parent84d656a2836021c3707172707245ba3d87bd54c8 (diff)
downloadu-boot-imx-5519194d4f6ba3c1aeea2f07f444cc936913560a.zip
u-boot-imx-5519194d4f6ba3c1aeea2f07f444cc936913560a.tar.gz
u-boot-imx-5519194d4f6ba3c1aeea2f07f444cc936913560a.tar.bz2
mtd: vf610_nfc: add Freescale NFC controller configs to Kconfig
This commit allows users to enable/disable the Freescale NFC controller found in systems like Vybrid (VF610), MPC5125, MCF54418 or Kinetis K70 via Kconfig with more detailed help docs. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Stefano Babic <sbabic@denx.de> [scottwood: updated vf610twr_nand_defconfig] Signed-off-by: Scott Wood <scottwood@freescale.com>
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/Kconfig30
1 files changed, 30 insertions, 0 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 72825c3..0a9e96f 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -32,6 +32,36 @@ config NAND_DENALI_SPARE_AREA_SKIP_BYTES
of OOB area before last ECC sector data starts. This is potentially
used to preserve the bad block marker in the OOB area.
+config NAND_VF610_NFC
+ bool "Support for Freescale NFC for VF610/MPC5125"
+ select SYS_NAND_SELF_INIT
+ help
+ Enables support for NAND Flash Controller on some Freescale
+ processors like the VF610, MPC5125, MCF54418 or Kinetis K70.
+ The driver supports a maximum 2k page size. The driver
+ currently does not support hardware ECC.
+
+comment "Generic NAND options"
+
+# Enhance depends when converting drivers to Kconfig which use this config
+# option (mxc_nand, ndfc, omap_gpmc).
+config SYS_NAND_BUSWIDTH_16BIT
+ bool "Use 16-bit NAND interface"
+ depends on NAND_VF610_NFC
+ help
+ Indicates that NAND device has 16-bit wide data-bus. In absence of this
+ config, bus-width of NAND device is assumed to be either 8-bit and later
+ determined by reading ONFI params.
+ Above config is useful when NAND device's bus-width information cannot
+ be determined from on-chip ONFI params, like in following scenarios:
+ - SPL boot does not support reading of ONFI parameters. This is done to
+ keep SPL code foot-print small.
+ - In current U-Boot flow using nand_init(), driver initialization
+ happens in board_nand_init() which is called before any device probe
+ (nand_scan_ident + nand_scan_tail), thus device's ONFI parameters are
+ not available while configuring controller. So a static CONFIG_NAND_xx
+ is needed to know the device's bus-width in advance.
+
if SPL
config SPL_NAND_DENALI