diff options
author | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-01-08 13:15:45 +0100 |
---|---|---|
committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-01-08 13:15:45 +0100 |
commit | 79f38777947ac7685e2cef8bd977f954ab198c0e (patch) | |
tree | 6fe053ef751b1c424ec50be338844197b6421d74 /drivers/mtd/nand/omap_gpmc.c | |
parent | 96764df1b47ddebfb50fadf5af72530b07b5fc89 (diff) | |
parent | 9bd5c1ad0db802c9f8d49d72b443f03431cf6a89 (diff) | |
download | u-boot-imx-79f38777947ac7685e2cef8bd977f954ab198c0e.zip u-boot-imx-79f38777947ac7685e2cef8bd977f954ab198c0e.tar.gz u-boot-imx-79f38777947ac7685e2cef8bd977f954ab198c0e.tar.bz2 |
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
This required manual merging drivers/mtd/nand/Makefile
and adding am335x_evm support for CONFIG_SPL_NAND_DRIVERS
Diffstat (limited to 'drivers/mtd/nand/omap_gpmc.c')
-rw-r--r-- | drivers/mtd/nand/omap_gpmc.c | 403 |
1 files changed, 402 insertions, 1 deletions
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index f1469d1..cee394e 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -29,6 +29,9 @@ #include <linux/mtd/nand_ecc.h> #include <linux/compiler.h> #include <nand.h> +#ifdef CONFIG_AM33XX +#include <asm/arch/elm.h> +#endif static uint8_t cs; static __maybe_unused struct nand_ecclayout hw_nand_oob = @@ -234,6 +237,370 @@ static void __maybe_unused omap_enable_hwecc(struct mtd_info *mtd, int32_t mode) } } +/* + * BCH8 support (needs ELM and thus AM33xx-only) + */ +#ifdef CONFIG_AM33XX +struct nand_bch_priv { + uint8_t mode; + uint8_t type; + uint8_t nibbles; +}; + +/* bch types */ +#define ECC_BCH4 0 +#define ECC_BCH8 1 +#define ECC_BCH16 2 + +/* BCH nibbles for diff bch levels */ +#define NAND_ECC_HW_BCH ((uint8_t)(NAND_ECC_HW_OOB_FIRST) + 1) +#define ECC_BCH4_NIBBLES 13 +#define ECC_BCH8_NIBBLES 26 +#define ECC_BCH16_NIBBLES 52 + +static struct nand_ecclayout hw_bch8_nand_oob = GPMC_NAND_HW_BCH8_ECC_LAYOUT; + +static struct nand_bch_priv bch_priv = { + .mode = NAND_ECC_HW_BCH, + .type = ECC_BCH8, + .nibbles = ECC_BCH8_NIBBLES +}; + +/* + * omap_read_bch8_result - Read BCH result for BCH8 level + * + * @mtd: MTD device structure + * @big_endian: When set read register 3 first + * @ecc_code: Read syndrome from BCH result registers + */ +static void omap_read_bch8_result(struct mtd_info *mtd, uint8_t big_endian, + uint8_t *ecc_code) +{ + uint32_t *ptr; + int8_t i = 0, j; + + if (big_endian) { + ptr = &gpmc_cfg->bch_result_0_3[0].bch_result_x[3]; + ecc_code[i++] = readl(ptr) & 0xFF; + ptr--; + for (j = 0; j < 3; j++) { + ecc_code[i++] = (readl(ptr) >> 24) & 0xFF; + ecc_code[i++] = (readl(ptr) >> 16) & 0xFF; + ecc_code[i++] = (readl(ptr) >> 8) & 0xFF; + ecc_code[i++] = readl(ptr) & 0xFF; + ptr--; + } + } else { + ptr = &gpmc_cfg->bch_result_0_3[0].bch_result_x[0]; + for (j = 0; j < 3; j++) { + ecc_code[i++] = readl(ptr) & 0xFF; + ecc_code[i++] = (readl(ptr) >> 8) & 0xFF; + ecc_code[i++] = (readl(ptr) >> 16) & 0xFF; + ecc_code[i++] = (readl(ptr) >> 24) & 0xFF; + ptr++; + } + ecc_code[i++] = readl(ptr) & 0xFF; + ecc_code[i++] = 0; /* 14th byte is always zero */ + } +} + +/* + * omap_ecc_disable - Disable H/W ECC calculation + * + * @mtd: MTD device structure + * + */ +static void omap_ecc_disable(struct mtd_info *mtd) +{ + writel((readl(&gpmc_cfg->ecc_config) & ~0x1), + &gpmc_cfg->ecc_config); +} + +/* + * omap_rotate_ecc_bch - Rotate the syndrome bytes + * + * @mtd: MTD device structure + * @calc_ecc: ECC read from ECC registers + * @syndrome: Rotated syndrome will be retuned in this array + * + */ +static void omap_rotate_ecc_bch(struct mtd_info *mtd, uint8_t *calc_ecc, + uint8_t *syndrome) +{ + struct nand_chip *chip = mtd->priv; + struct nand_bch_priv *bch = chip->priv; + uint8_t n_bytes = 0; + int8_t i, j; + + switch (bch->type) { + case ECC_BCH4: + n_bytes = 8; + break; + + case ECC_BCH16: + n_bytes = 28; + break; + + case ECC_BCH8: + default: + n_bytes = 13; + break; + } + + for (i = 0, j = (n_bytes-1); i < n_bytes; i++, j--) + syndrome[i] = calc_ecc[j]; +} + +/* + * omap_calculate_ecc_bch - Read BCH ECC result + * + * @mtd: MTD structure + * @dat: unused + * @ecc_code: ecc_code buffer + */ +static int omap_calculate_ecc_bch(struct mtd_info *mtd, const uint8_t *dat, + uint8_t *ecc_code) +{ + struct nand_chip *chip = mtd->priv; + struct nand_bch_priv *bch = chip->priv; + uint8_t big_endian = 1; + int8_t ret = 0; + + if (bch->type == ECC_BCH8) + omap_read_bch8_result(mtd, big_endian, ecc_code); + else /* BCH4 and BCH16 currently not supported */ + ret = -1; + + /* + * Stop reading anymore ECC vals and clear old results + * enable will be called if more reads are required + */ + omap_ecc_disable(mtd); + + return ret; +} + +/* + * omap_fix_errors_bch - Correct bch error in the data + * + * @mtd: MTD device structure + * @data: Data read from flash + * @error_count:Number of errors in data + * @error_loc: Locations of errors in the data + * + */ +static void omap_fix_errors_bch(struct mtd_info *mtd, uint8_t *data, + uint32_t error_count, uint32_t *error_loc) +{ + struct nand_chip *chip = mtd->priv; + struct nand_bch_priv *bch = chip->priv; + uint8_t count = 0; + uint32_t error_byte_pos; + uint32_t error_bit_mask; + uint32_t last_bit = (bch->nibbles * 4) - 1; + + /* Flip all bits as specified by the error location array. */ + /* FOR( each found error location flip the bit ) */ + for (count = 0; count < error_count; count++) { + if (error_loc[count] > last_bit) { + /* Remove the ECC spare bits from correction. */ + error_loc[count] -= (last_bit + 1); + /* Offset bit in data region */ + error_byte_pos = ((512 * 8) - + (error_loc[count]) - 1) / 8; + /* Error Bit mask */ + error_bit_mask = 0x1 << (error_loc[count] % 8); + /* Toggle the error bit to make the correction. */ + data[error_byte_pos] ^= error_bit_mask; + } + } +} + +/* + * omap_correct_data_bch - Compares the ecc read from nand spare area + * with ECC registers values and corrects one bit error if it has occured + * + * @mtd: MTD device structure + * @dat: page data + * @read_ecc: ecc read from nand flash (ignored) + * @calc_ecc: ecc read from ECC registers + * + * @return 0 if data is OK or corrected, else returns -1 + */ +static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat, + uint8_t *read_ecc, uint8_t *calc_ecc) +{ + struct nand_chip *chip = mtd->priv; + struct nand_bch_priv *bch = chip->priv; + uint8_t syndrome[28]; + uint32_t error_count = 0; + uint32_t error_loc[8]; + uint32_t i, ecc_flag; + + ecc_flag = 0; + for (i = 0; i < chip->ecc.bytes; i++) + if (read_ecc[i] != 0xff) + ecc_flag = 1; + + if (!ecc_flag) + return 0; + + elm_reset(); + elm_config((enum bch_level)(bch->type)); + + /* + * while reading ECC result we read it in big endian. + * Hence while loading to ELM we have rotate to get the right endian. + */ + omap_rotate_ecc_bch(mtd, calc_ecc, syndrome); + + /* use elm module to check for errors */ + if (elm_check_error(syndrome, bch->nibbles, &error_count, + error_loc) != 0) { + printf("ECC: uncorrectable.\n"); + return -1; + } + + /* correct bch error */ + if (error_count > 0) + omap_fix_errors_bch(mtd, dat, error_count, error_loc); + + return 0; +} +/* + * omap_hwecc_init_bch - Initialize the BCH Hardware ECC for NAND flash in + * GPMC controller + * @mtd: MTD device structure + * @mode: Read/Write mode + */ +static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode) +{ + uint32_t val, dev_width = (chip->options & NAND_BUSWIDTH_16) >> 1; + uint32_t unused_length = 0; + struct nand_bch_priv *bch = chip->priv; + + switch (bch->nibbles) { + case ECC_BCH4_NIBBLES: + unused_length = 3; + break; + case ECC_BCH8_NIBBLES: + unused_length = 2; + break; + case ECC_BCH16_NIBBLES: + unused_length = 0; + break; + } + + /* Clear the ecc result registers, select ecc reg as 1 */ + writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control); + + switch (mode) { + case NAND_ECC_WRITE: + /* eccsize1 config */ + val = ((unused_length + bch->nibbles) << 22); + break; + + case NAND_ECC_READ: + default: + /* by default eccsize0 selected for ecc1resultsize */ + /* eccsize0 config */ + val = (bch->nibbles << 12); + /* eccsize1 config */ + val |= (unused_length << 22); + break; + } + /* ecc size configuration */ + writel(val, &gpmc_cfg->ecc_size_config); + /* by default 512bytes sector page is selected */ + /* set bch mode */ + val = (1 << 16); + /* bch4 / bch8 / bch16 */ + val |= (bch->type << 12); + /* set wrap mode to 1 */ + val |= (1 << 8); + val |= (dev_width << 7); + val |= (cs << 1); + writel(val, &gpmc_cfg->ecc_config); +} + +/* + * omap_enable_ecc_bch- This function enables the bch h/w ecc functionality + * @mtd: MTD device structure + * @mode: Read/Write mode + * + */ +static void omap_enable_ecc_bch(struct mtd_info *mtd, int32_t mode) +{ + struct nand_chip *chip = mtd->priv; + + omap_hwecc_init_bch(chip, mode); + /* enable ecc */ + writel((readl(&gpmc_cfg->ecc_config) | 0x1), &gpmc_cfg->ecc_config); +} + +/** + * omap_read_page_bch - hardware ecc based page read function + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: buffer to store read data + * @page: page number to read + * + */ +static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int page) +{ + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *p = buf; + uint8_t *ecc_calc = chip->buffers->ecccalc; + uint8_t *ecc_code = chip->buffers->ecccode; + uint32_t *eccpos = chip->ecc.layout->eccpos; + uint8_t *oob = chip->oob_poi; + uint32_t data_pos; + uint32_t oob_pos; + + data_pos = 0; + /* oob area start */ + oob_pos = (eccsize * eccsteps) + chip->ecc.layout->eccpos[0]; + oob += chip->ecc.layout->eccpos[0]; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize, + oob += eccbytes) { + chip->ecc.hwctl(mtd, NAND_ECC_READ); + /* read data */ + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page); + chip->read_buf(mtd, p, eccsize); + + /* read respective ecc from oob area */ + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page); + chip->read_buf(mtd, oob, eccbytes); + /* read syndrome */ + chip->ecc.calculate(mtd, p, &ecc_calc[i]); + + data_pos += eccsize; + oob_pos += eccbytes; + } + + for (i = 0; i < chip->ecc.total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; + + eccsteps = chip->ecc.steps; + p = buf; + + for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + + stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + } + return 0; +} +#endif /* CONFIG_AM33XX */ + #ifndef CONFIG_SPL_BUILD /* * omap_nand_switch_ecc - switch the ECC operation b/w h/w ecc and s/w ecc. @@ -269,7 +636,7 @@ void omap_nand_switch_ecc(int32_t hardware) nand->ecc.calculate = NULL; /* Setup the ecc configurations again */ - if (hardware) { + if (hardware == 1) { nand->ecc.mode = NAND_ECC_HW; nand->ecc.layout = &hw_nand_oob; nand->ecc.size = 512; @@ -279,6 +646,19 @@ void omap_nand_switch_ecc(int32_t hardware) nand->ecc.calculate = omap_calculate_ecc; omap_hwecc_init(nand); printf("HW ECC selected\n"); +#ifdef CONFIG_AM33XX + } else if (hardware == 2) { + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.layout = &hw_bch8_nand_oob; + nand->ecc.size = 512; + nand->ecc.bytes = 14; + nand->ecc.read_page = omap_read_page_bch; + nand->ecc.hwctl = omap_enable_ecc_bch; + nand->ecc.correct = omap_correct_data_bch; + nand->ecc.calculate = omap_calculate_ecc_bch; + omap_hwecc_init_bch(nand, NAND_ECC_READ); + printf("HW BCH8 selected\n"); +#endif } else { nand->ecc.mode = NAND_ECC_SOFT; /* Use mtd default settings */ @@ -350,7 +730,27 @@ int board_nand_init(struct nand_chip *nand) nand->options |= NAND_BUSWIDTH_16; nand->chip_delay = 100; + +#ifdef CONFIG_AM33XX + /* required in case of BCH */ + elm_init(); + + /* BCH info that will be correct for SPL or overridden otherwise. */ + nand->priv = &bch_priv; +#endif + /* Default ECC mode */ +#ifdef CONFIG_AM33XX + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.layout = &hw_bch8_nand_oob; + nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; + nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; + nand->ecc.hwctl = omap_enable_ecc_bch; + nand->ecc.correct = omap_correct_data_bch; + nand->ecc.calculate = omap_calculate_ecc_bch; + nand->ecc.read_page = omap_read_page_bch; + omap_hwecc_init_bch(nand, NAND_ECC_READ); +#else #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_NAND_SOFTECC) nand->ecc.mode = NAND_ECC_SOFT; #else @@ -363,6 +763,7 @@ int board_nand_init(struct nand_chip *nand) nand->ecc.calculate = omap_calculate_ecc; omap_hwecc_init(nand); #endif +#endif #ifdef CONFIG_SPL_BUILD if (nand->options & NAND_BUSWIDTH_16) |