nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE

The CONFIG_MTD_NAND_VERIFY_WRITE has been removed from Linux for some
time and a more generic method of NAND verification now exists in U-Boot.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>

1 files changed, 0 insertions, 65 deletions

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 6db6566..c0e381a 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -361,51 +361,6 @@ void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 	ioread8_rep(chip->IO_ADDR_R, buf, len);
 }
 
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-/**
- * nand_verify_buf - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
- *
- * Default verify function for 8bit buswidth.
- */
-static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-{
-	int i;
-	struct nand_chip *chip = mtd->priv;
-
-	for (i = 0; i < len; i++)
-		if (buf[i] != readb(chip->IO_ADDR_R))
-			return -EFAULT;
-	return 0;
-}
-
-/**
- * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
- *
- * Default verify function for 16bit buswidth.
- */
-static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
-{
-	int i;
-	struct nand_chip *chip = mtd->priv;
-	u16 *p = (u16 *) buf;
-	len >>= 1;
-
-	for (i = 0; i < len; i++)
-		if (p[i] != readw(chip->IO_ADDR_R))
-			return -EFAULT;
-
-	return 0;
-}
-#endif
-#endif
-
 /**
  * nand_write_buf16 - [DEFAULT] write buffer to chip
  * @mtd: MTD device structure
@@ -2435,20 +2390,6 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 		status = chip->waitfunc(mtd, chip);
 	}
 
-
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	/* Send command to read back the data */
-	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
-
-	if (chip->verify_buf(mtd, buf, mtd->writesize))
-		return -EIO;
-
-	/* Make sure the next page prog is preceded by a status read */
-	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
-#endif
-#endif
-
 	return 0;
 }
 
@@ -3139,12 +3080,6 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
 		chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;
 	if (!chip->scan_bbt)
 		chip->scan_bbt = nand_default_bbt;
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	if (!chip->verify_buf)
-		chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
-#endif
-#endif
 
 	if (!chip->controller) {
 		chip->controller = &chip->hwcontrol;