nand: mxc: Switch NAND SPL to generic SPL

This also fixes support for mx31pdk and tx25, which had been broken by commit
e05e5de7fae5bec79617e113916dac6631251156.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>

1 files changed, 225 insertions, 0 deletions

diff --git a/drivers/mtd/nand/mxc_nand.h b/drivers/mtd/nand/mxc_nand.h
new file mode 100644
index 0000000..308ff8d
--- /dev/null
+++ b/drivers/mtd/nand/mxc_nand.h
@@ -0,0 +1,225 @@
+/*
+ * (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MXC_NAND_H
+#define __MXC_NAND_H
+
+/*
+ * Register map and bit definitions for the Freescale NAND Flash Controller
+ * present in various i.MX devices.
+ *
+ * MX31 and MX27 have version 1, which has:
+ *	4 512-byte main buffers and
+ *	4 16-byte spare buffers
+ *	to support up to 2K byte pagesize nand.
+ *	Reading or writing a 2K page requires 4 FDI/FDO cycles.
+ *
+ * MX25 and MX35 have version 2.1, and MX51 and MX53 have version 3.2, which
+ * have:
+ *	8 512-byte main buffers and
+ *	8 64-byte spare buffers
+ *	to support up to 4K byte pagesize nand.
+ *	Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
+ *	Also some of registers are moved and/or changed meaning as seen below.
+ */
+#if defined(CONFIG_MX27) || defined(CONFIG_MX31)
+#define MXC_NFC_V1
+#define is_mxc_nfc_1()		1
+#define is_mxc_nfc_21()		0
+#define is_mxc_nfc_32()		0
+#elif defined(CONFIG_MX25) || defined(CONFIG_MX35)
+#define MXC_NFC_V2_1
+#define is_mxc_nfc_1()		0
+#define is_mxc_nfc_21()		1
+#define is_mxc_nfc_32()		0
+#elif defined(CONFIG_MX51) || defined(CONFIG_MX53)
+#define MXC_NFC_V3
+#define MXC_NFC_V3_2
+#define is_mxc_nfc_1()		0
+#define is_mxc_nfc_21()		0
+#define is_mxc_nfc_32()		1
+#else
+#error "MXC NFC implementation not supported"
+#endif
+#define is_mxc_nfc_3()		is_mxc_nfc_32()
+
+#if defined(MXC_NFC_V1)
+#define NAND_MXC_NR_BUFS		4
+#define NAND_MXC_SPARE_BUF_SIZE		16
+#define NAND_MXC_REG_OFFSET		0xe00
+#define NAND_MXC_2K_MULTI_CYCLE
+#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
+#define NAND_MXC_NR_BUFS		8
+#define NAND_MXC_SPARE_BUF_SIZE		64
+#define NAND_MXC_REG_OFFSET		0x1e00
+#endif
+
+struct mxc_nand_regs {
+	u8 main_area[NAND_MXC_NR_BUFS][0x200];
+	u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
+	/*
+	 * reserved size is offset of nfc registers
+	 * minus total main and spare sizes
+	 */
+	u8 reserved1[NAND_MXC_REG_OFFSET
+		- NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
+#if defined(MXC_NFC_V1)
+	u16 buf_size;
+	u16 reserved2;
+	u16 buf_addr;
+	u16 flash_addr;
+	u16 flash_cmd;
+	u16 config;
+	u16 ecc_status_result;
+	u16 rsltmain_area;
+	u16 rsltspare_area;
+	u16 wrprot;
+	u16 unlockstart_blkaddr;
+	u16 unlockend_blkaddr;
+	u16 nf_wrprst;
+	u16 config1;
+	u16 config2;
+#elif defined(MXC_NFC_V2_1)
+	u16 reserved2[2];
+	u16 buf_addr;
+	u16 flash_addr;
+	u16 flash_cmd;
+	u16 config;
+	u32 ecc_status_result;
+	u16 spare_area_size;
+	u16 wrprot;
+	u16 reserved3[2];
+	u16 nf_wrprst;
+	u16 config1;
+	u16 config2;
+	u16 reserved4;
+	u16 unlockstart_blkaddr;
+	u16 unlockend_blkaddr;
+	u16 unlockstart_blkaddr1;
+	u16 unlockend_blkaddr1;
+	u16 unlockstart_blkaddr2;
+	u16 unlockend_blkaddr2;
+	u16 unlockstart_blkaddr3;
+	u16 unlockend_blkaddr3;
+#elif defined(MXC_NFC_V3_2)
+	u32 flash_cmd;
+	u32 flash_addr[12];
+	u32 config1;
+	u32 ecc_status_result;
+	u32 status_sum;
+	u32 launch;
+#endif
+};
+
+#ifdef MXC_NFC_V3_2
+struct mxc_nand_ip_regs {
+	u32 wrprot;
+	u32 wrprot_unlock_blkaddr[8];
+	u32 config2;
+	u32 config3;
+	u32 ipc;
+	u32 err_addr;
+	u32 delay_line;
+};
+#endif
+
+/* Set FCMD to 1, rest to 0 for Command operation */
+#define NFC_CMD				0x1
+
+/* Set FADD to 1, rest to 0 for Address operation */
+#define NFC_ADDR			0x2
+
+/* Set FDI to 1, rest to 0 for Input operation */
+#define NFC_INPUT			0x4
+
+/* Set FDO to 001, rest to 0 for Data Output operation */
+#define NFC_OUTPUT			0x8
+
+/* Set FDO to 010, rest to 0 for Read ID operation */
+#define NFC_ID				0x10
+
+/* Set FDO to 100, rest to 0 for Read Status operation */
+#define NFC_STATUS			0x20
+
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+#define NFC_CONFIG1_SP_EN		(1 << 2)
+#define NFC_CONFIG1_RST			(1 << 6)
+#define NFC_CONFIG1_CE			(1 << 7)
+#elif defined(MXC_NFC_V3_2)
+#define NFC_CONFIG1_SP_EN		(1 << 0)
+#define NFC_CONFIG1_CE			(1 << 1)
+#define NFC_CONFIG1_RST			(1 << 2)
+#endif
+#define NFC_V1_V2_CONFIG1_ECC_EN	(1 << 3)
+#define NFC_V1_V2_CONFIG1_INT_MSK	(1 << 4)
+#define NFC_V1_V2_CONFIG1_BIG		(1 << 5)
+#define NFC_V2_CONFIG1_ECC_MODE_4	(1 << 0)
+#define NFC_V2_CONFIG1_ONE_CYCLE	(1 << 8)
+#define NFC_V2_CONFIG1_FP_INT		(1 << 11)
+#define NFC_V3_CONFIG1_RBA_MASK		(0x7 << 4)
+#define NFC_V3_CONFIG1_RBA(x)		(((x) & 0x7) << 4)
+
+#define NFC_V1_V2_CONFIG2_INT		(1 << 15)
+#define NFC_V3_CONFIG2_PS_MASK		(0x3 << 0)
+#define NFC_V3_CONFIG2_PS_512		(0 << 0)
+#define NFC_V3_CONFIG2_PS_2048		(1 << 0)
+#define NFC_V3_CONFIG2_PS_4096		(2 << 0)
+#define NFC_V3_CONFIG2_ONE_CYCLE	(1 << 2)
+#define NFC_V3_CONFIG2_ECC_EN		(1 << 3)
+#define NFC_V3_CONFIG2_2CMD_PHASES	(1 << 4)
+#define NFC_V3_CONFIG2_NUM_ADDR_PH0	(1 << 5)
+#define NFC_V3_CONFIG2_ECC_MODE_8	(1 << 6)
+#define NFC_V3_CONFIG2_PPB_MASK		(0x3 << 7)
+#define NFC_V3_CONFIG2_PPB(x)		(((x) & 0x3) << 7)
+#define NFC_V3_CONFIG2_EDC_MASK		(0x7 << 9)
+#define NFC_V3_CONFIG2_EDC(x)		(((x) & 0x7) << 9)
+#define NFC_V3_CONFIG2_NUM_ADDR_PH1(x)	(((x) & 0x3) << 12)
+#define NFC_V3_CONFIG2_INT_MSK		(1 << 15)
+#define NFC_V3_CONFIG2_SPAS_MASK	(0xff << 16)
+#define NFC_V3_CONFIG2_SPAS(x)		(((x) & 0xff) << 16)
+#define NFC_V3_CONFIG2_ST_CMD_MASK	(0xff << 24)
+#define NFC_V3_CONFIG2_ST_CMD(x)	(((x) & 0xff) << 24)
+
+#define NFC_V3_CONFIG3_ADD_OP(x)	(((x) & 0x3) << 0)
+#define NFC_V3_CONFIG3_FW8		(1 << 3)
+#define NFC_V3_CONFIG3_SBB(x)		(((x) & 0x7) << 8)
+#define NFC_V3_CONFIG3_NUM_OF_DEVS(x)	(((x) & 0x7) << 12)
+#define NFC_V3_CONFIG3_RBB_MODE		(1 << 15)
+#define NFC_V3_CONFIG3_NO_SDMA		(1 << 20)
+
+#define NFC_V3_WRPROT_UNLOCK		(1 << 2)
+#define NFC_V3_WRPROT_BLS_UNLOCK	(2 << 6)
+
+#define NFC_V3_IPC_CREQ			(1 << 0)
+#define NFC_V3_IPC_INT			(1 << 31)
+
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+#define operation	config2
+#define readnfc		readw
+#define writenfc	writew
+#elif defined(MXC_NFC_V3_2)
+#define operation	launch
+#define readnfc		readl
+#define writenfc	writel
+#endif
+
+#endif /* __MXC_NAND_H */