Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  ARM: Add Calxeda Highbank platform
  dkb: make mmc command as default enabled
  Marvell: dkb: add mmc support
  ARM: pantheon: add mmc definition
  davinci: remove config.mk file from the sources
  ARM:AM33XX: Add support for TI AM335X EVM
  ARM:AM33XX: Added timer support
  ARM:AM33XX: Add emif/ddr support
  ARM:AM33XX: Add clock definitions
  ARM:AM33XX: Added support for AM33xx
  omap3/emif4: fix registers definition
  davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
  davinci: emac: add support for more than 1 PHYs
  davinci: emac: add new features to autonegotiate for EMAC
  da850evm: Move LPSC configuration to board_early_init_f()
  omap4_panda: Build in cmd_gpio support on panda
  omap: Don't use gpio_free to change direction to input
  mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset
  OMAP3: overo : Add environment variable optargs to bootargs
  OMAP3: overo: Move ethernet CS4 configuration to execute based on board id
  OMAP3: overo : Use ttyO2 instead of ttyS2.
  da830: add support for NAND boot mode
  dm36x: revert cache disable patch
  dm644X: revert cache disable patch
  devkit8000: Add malloc space
  omap: spl: fix build break due to changes in FAT
  OMAP3 SPL: Provide weak omap_rev_string
  omap: beagle: Use ubifs instead of jffs2 for nand boot
  omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
  omap: overo: Configure mux for gpio10
  SPL: Add DMA library
  omap3: Add interface for omap3 DMA
  omap3: Add DMA register accessors
  omap3: Add Base register for DMA
  arm, davinci: add missing LSPC define for MMC/SD1
  U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
  DaVinci: correct MDSTAT.STATE mask
  omap4: splitting padconfs into common, 4430 and 4460
  omap4: adding revision detection for 4460 ES1.1
  omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL
  gplug: fixed build error as a result of code cleanup patch
  kirkwood_spi: add dummy spi_init()
  gpio: mvmfp: reduce include platform file
  ARM: orion5x: reduce dependence of including platform file
  serial: reduce include platform file for marvell chip
  ARM: kirkwood: reduce dependence of including platform file
  ARM: armada100: reduce dependence of including platform file
  ARM: pantheon: reduce dependence of including platform file
  Armada100: Add env storage support for Marvell gplugD
  Armada100: Add SPI flash support for Marvell gplugD
  Armada100: Add SPI support for Marvell gplugD
  SPI: Add SPI driver support for Marvell Armada100
  dreamplug: initial board support.
  imx: fix coding style
  misc: pmic: drop old Freescale's pmic driver
  MX31: mx31pdk: use new pmic driver
  MX31: mx31ads: use new pmic driver
  MX31: mx31_litekit: use new pmic driver
  MX5: mx53evk: use new pmic driver
  MX5: mx51evk: use new pmic driver
  MX35: mx35pdk: use new pmic driver
  misc: pmic: addI2C  support to pmic_fsl driver
  misc: pmic: use I2C_SET_BUS in pmic I2C
  MX5: efikamx/efikasb: use new pmic driver
  MX3: qong: use new pmic driver
  RTC: Switch mc13783 to generic pmic code
  MX5: vision2: use new pmic driver
  misc: pmic: Freescale PMIC switches to generic PMIC driver
  misc:pmic:samsung Enable PMIC driver at GONI target
  misc:pmic:max8998 MAX8998 support at a new PMIC driver.
  misc:pmic:core New generic PMIC driver
  mx31pdk: Remove unneeded config
  mx31: provide readable WEIM CS accessor
  MX51: vision2: Set global macros
  I2C: Add i2c_get/set_speed() to mxc_i2c.c
  ARM: Update mach-types
  devkit8000: Add config to enable SPL MMC boot
  devkit8000: protect board_mmc_init
  arm, post: add missing post_time_ms for arm
  cosmetic, post: Codingstyle cleanup
  arm, logbuffer: make it compileclean
  tegra2: Enable MMC for Seaboard
  tegra2: Add more pinmux functions
  tegra2: Rename PIN_ to PINGRP_
  tegra2: Add more clock functions
  tegra2: Clean up board code a little
  tegra2: Rename CLOCK_PLL_ID to CLOCK_ID

3 files changed, 37 insertions, 62 deletions

diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 5d4cf51..ebda980 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -475,12 +475,16 @@ int omap_mmc_init(int dev_index)
 	case 0:
 		mmc->priv = (hsmmc_t *)OMAP_HSMMC1_BASE;
 		break;
+#ifdef OMAP_HSMMC2_BASE
 	case 1:
 		mmc->priv = (hsmmc_t *)OMAP_HSMMC2_BASE;
 		break;
+#endif
+#ifdef OMAP_HSMMC3_BASE
 	case 2:
 		mmc->priv = (hsmmc_t *)OMAP_HSMMC3_BASE;
 		break;
+#endif
 	default:
 		mmc->priv = (hsmmc_t *)OMAP_HSMMC1_BASE;
 		return 1;
diff --git a/drivers/mmc/tegra2_mmc.c b/drivers/mmc/tegra2_mmc.c
index 8b6f829..9e741f2 100644
--- a/drivers/mmc/tegra2_mmc.c
+++ b/drivers/mmc/tegra2_mmc.c
@@ -23,36 +23,46 @@
 #include <mmc.h>
 #include <asm/io.h>
 #include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
 #include "tegra2_mmc.h"
 
 /* support 4 mmc hosts */
 struct mmc mmc_dev[4];
 struct mmc_host mmc_host[4];
 
-static inline struct tegra2_mmc *tegra2_get_base_mmc(int dev_index)
+
+/**
+ * Get the host address and peripheral ID for a device. Devices are numbered
+ * from 0 to 3.
+ *
+ * @param host		Structure to fill in (base, reg, mmc_id)
+ * @param dev_index	Device index (0-3)
+ */
+static void tegra2_get_setup(struct mmc_host *host, int dev_index)
 {
-	unsigned long offset;
 	debug("tegra2_get_base_mmc: dev_index = %d\n", dev_index);
 
 	switch (dev_index) {
-	case 0:
-		offset = TEGRA2_SDMMC4_BASE;
-		break;
 	case 1:
-		offset = TEGRA2_SDMMC3_BASE;
+		host->base = TEGRA2_SDMMC3_BASE;
+		host->mmc_id = PERIPH_ID_SDMMC3;
 		break;
 	case 2:
-		offset = TEGRA2_SDMMC2_BASE;
+		host->base = TEGRA2_SDMMC2_BASE;
+		host->mmc_id = PERIPH_ID_SDMMC2;
 		break;
 	case 3:
-		offset = TEGRA2_SDMMC1_BASE;
+		host->base = TEGRA2_SDMMC1_BASE;
+		host->mmc_id = PERIPH_ID_SDMMC1;
 		break;
+	case 0:
 	default:
-		offset = TEGRA2_SDMMC4_BASE;
+		host->base = TEGRA2_SDMMC4_BASE;
+		host->mmc_id = PERIPH_ID_SDMMC4;
 		break;
 	}
 
-	return (struct tegra2_mmc *)(offset);
+	host->reg = (struct tegra2_mmc *)host->base;
 }
 
 static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
@@ -274,62 +284,24 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 
 static void mmc_change_clock(struct mmc_host *host, uint clock)
 {
-	int div, hw_div;
+	int div;
 	unsigned short clk;
 	unsigned long timeout;
-	unsigned int reg, hostbase;
-	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+
 	debug(" mmc_change_clock called\n");
 
-	/* Change Tegra2 SDMMCx clock divisor here */
-	/* Source is 216MHz, PLLP_OUT0 */
+	/*
+	 * Change Tegra2 SDMMCx clock divisor here. Source is 216MHz,
+	 * PLLP_OUT0
+	 */
 	if (clock == 0)
 		goto out;
-
-	div = 1;
-	if (clock <= 400000) {
-		hw_div = ((9-1)<<1);		/* Best match is 375KHz */
-		div = 64;
-	} else if (clock <= 20000000)
-		hw_div = ((11-1)<<1);		/* Best match is 19.6MHz */
-	else if (clock <= 26000000)
-		hw_div = ((9-1)<<1);		/* Use 24MHz */
-	else
-		hw_div = ((4-1)<<1) + 1;	/* 4.5 divisor for 48MHz */
-
-	debug("mmc_change_clock: hw_div = %d, card clock div = %d\n",
-		hw_div, div);
-
-	/* Change SDMMCx divisor */
-
-	hostbase = readl(&host->base);
-	debug("mmc_change_clock: hostbase = %08X\n", hostbase);
-
-	if (hostbase == TEGRA2_SDMMC1_BASE) {
-		reg = readl(&clkrst->crc_clk_src_sdmmc1);
-		reg &= 0xFFFFFF00;	/* divisor (7.1) = 00 */
-		reg |= hw_div;		/* n-1 */
-		writel(reg, &clkrst->crc_clk_src_sdmmc1);
-	} else if (hostbase == TEGRA2_SDMMC2_BASE) {
-		reg = readl(&clkrst->crc_clk_src_sdmmc2);
-		reg &= 0xFFFFFF00;	/* divisor (7.1) = 00 */
-		reg |= hw_div;		/* n-1 */
-		writel(reg, &clkrst->crc_clk_src_sdmmc2);
-	} else if (hostbase == TEGRA2_SDMMC3_BASE) {
-		reg = readl(&clkrst->crc_clk_src_sdmmc3);
-		reg &= 0xFFFFFF00;	/* divisor (7.1) = 00 */
-		reg |= hw_div;		/* n-1 */
-		writel(reg, &clkrst->crc_clk_src_sdmmc3);
-	} else {
-		reg = readl(&clkrst->crc_clk_src_sdmmc4);
-		reg &= 0xFFFFFF00;	/* divisor (7.1) = 00 */
-		reg |= hw_div;		/* n-1 */
-		writel(reg, &clkrst->crc_clk_src_sdmmc4);
-	}
+	clock_adjust_periph_pll_div(host->mmc_id, CLOCK_ID_PERIPH, clock,
+				    &div);
+	debug("div = %d\n", div);
 
 	writew(0, &host->reg->clkcon);
 
-	div >>= 1;
 	/*
 	 * CLKCON
 	 * SELFREQ[15:8]	: base clock divided by value
@@ -337,6 +309,7 @@ static void mmc_change_clock(struct mmc_host *host, uint clock)
 	 * STBLINTCLK[1]	: Internal Clock Stable
 	 * ENINTCLK[0]		: Internal Clock Enable
 	 */
+	div >>= 1;
 	clk = (div << 8) | (1 << 0);
 	writew(clk, &host->reg->clkcon);
 
@@ -355,7 +328,6 @@ static void mmc_change_clock(struct mmc_host *host, uint clock)
 	writew(clk, &host->reg->clkcon);
 
 	debug("mmc_change_clock: clkcon = %08X\n", clk);
-	debug("mmc_change_clock: CLK_SOURCE_SDMMCx = %08X\n", reg);
 
 out:
 	host->clock = clock;
@@ -370,7 +342,6 @@ static void mmc_set_ios(struct mmc *mmc)
 	debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
 
 	/* Change clock first */
-
 	mmc_change_clock(host, mmc->clock);
 
 	ctrl = readb(&host->reg->hostctl);
@@ -481,7 +452,7 @@ static int tegra2_mmc_initialize(int dev_index, int bus_width)
 		mmc->host_caps = MMC_MODE_8BIT;
 	else
 		mmc->host_caps = MMC_MODE_4BIT;
-	mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
+	mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
 
 	/*
 	 * min freq is for card identification, and is the highest
@@ -495,8 +466,7 @@ static int tegra2_mmc_initialize(int dev_index, int bus_width)
 	mmc->f_max = 48000000;
 
 	mmc_host[dev_index].clock = 0;
-	mmc_host[dev_index].reg = tegra2_get_base_mmc(dev_index);
-	mmc_host[dev_index].base = (unsigned int)mmc_host[dev_index].reg;
+	tegra2_get_setup(&mmc_host[dev_index], dev_index);
 	mmc_register(mmc);
 
 	return 0;
diff --git a/drivers/mmc/tegra2_mmc.h b/drivers/mmc/tegra2_mmc.h
index 4b80f9f..28698e0 100644
--- a/drivers/mmc/tegra2_mmc.h
+++ b/drivers/mmc/tegra2_mmc.h
@@ -73,6 +73,7 @@ struct mmc_host {
 	unsigned int version;	/* SDHCI spec. version */
 	unsigned int clock;	/* Current clock (MHz) */
 	unsigned int base;	/* Base address, SDMMC1/2/3/4 */
+	enum periph_id mmc_id;	/* Peripheral ID: PERIPH_ID_... */
 };
 
 int tegra2_mmc_init(int dev_index, int bus_width);