Merge branch 'master' of git://git.denx.de/u-boot-samsung

2 files changed, 479 insertions, 0 deletions

diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 6fa04b8..8dfd8a3 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -32,6 +32,7 @@ COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o
 COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
 COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o
 COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o
+COBJS-$(CONFIG_S5P_MMC) += s5p_mmc.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/mmc/s5p_mmc.c b/drivers/mmc/s5p_mmc.c
new file mode 100644
index 0000000..669b1d0
--- /dev/null
+++ b/drivers/mmc/s5p_mmc.c
@@ -0,0 +1,478 @@
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <asm/io.h>
+#include <asm/arch/mmc.h>
+
+#ifdef DEBUG_S5P_HSMMC
+#define dbg(x...)       printf(x)
+#else
+#define dbg(x...)       do { } while (0)
+#endif
+
+/* support 4 mmc hosts */
+struct mmc mmc_dev[4];
+struct mmc_host mmc_host[4];
+
+static inline struct s5p_mmc *s5p_get_base_mmc(int dev_index)
+{
+	unsigned long offset = dev_index * sizeof(struct s5p_mmc);
+
+	if (cpu_is_s5pc100())
+		return (struct s5p_mmc *)(S5PC100_MMC_BASE + offset);
+	else
+		return (struct s5p_mmc *)(S5PC110_MMC_BASE + offset);
+}
+
+static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
+{
+	unsigned char ctrl;
+
+	dbg("data->dest: %08x\n", (u32)data->dest);
+	writel((u32)data->dest, &host->reg->sysad);
+	/*
+	 * DMASEL[4:3]
+	 * 00 = Selects SDMA
+	 * 01 = Reserved
+	 * 10 = Selects 32-bit Address ADMA2
+	 * 11 = Selects 64-bit Address ADMA2
+	 */
+	ctrl = readb(&host->reg->hostctl);
+	ctrl &= ~(3 << 3);
+	writeb(ctrl, &host->reg->hostctl);
+
+	/* We do not handle DMA boundaries, so set it to max (512 KiB) */
+	writew((7 << 12) | (512 << 0), &host->reg->blksize);
+	writew(data->blocks, &host->reg->blkcnt);
+}
+
+static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data)
+{
+	unsigned short mode;
+
+	/*
+	 * TRNMOD
+	 * MUL1SIN0[5]	: Multi/Single Block Select
+	 * RD1WT0[4]	: Data Transfer Direction Select
+	 *	1 = read
+	 *	0 = write
+	 * ENACMD12[2]	: Auto CMD12 Enable
+	 * ENBLKCNT[1]	: Block Count Enable
+	 * ENDMA[0]	: DMA Enable
+	 */
+	mode = (1 << 1) | (1 << 0);
+	if (data->blocks > 1)
+		mode |= (1 << 5);
+	if (data->flags & MMC_DATA_READ)
+		mode |= (1 << 4);
+
+	writew(mode, &host->reg->trnmod);
+}
+
+static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+			struct mmc_data *data)
+{
+	struct mmc_host *host = (struct mmc_host *)mmc->priv;
+	int flags, i;
+	unsigned int timeout;
+	unsigned int mask;
+	unsigned int retry = 0x100000;
+
+	/* Wait max 10 ms */
+	timeout = 10;
+
+	/*
+	 * PRNSTS
+	 * CMDINHDAT[1]	: Command Inhibit (DAT)
+	 * CMDINHCMD[0]	: Command Inhibit (CMD)
+	 */
+	mask = (1 << 0);
+	if ((data != NULL) || (cmd->resp_type & MMC_RSP_BUSY))
+		mask |= (1 << 1);
+
+	/*
+	 * We shouldn't wait for data inihibit for stop commands, even
+	 * though they might use busy signaling
+	 */
+	if (data)
+		mask &= ~(1 << 1);
+
+	while (readl(&host->reg->prnsts) & mask) {
+		if (timeout == 0) {
+			printf("%s: timeout error\n", __func__);
+			return -1;
+		}
+		timeout--;
+		udelay(1000);
+	}
+
+	if (data)
+		mmc_prepare_data(host, data);
+
+	dbg("cmd->arg: %08x\n", cmd->cmdarg);
+	writel(cmd->cmdarg, &host->reg->argument);
+
+	if (data)
+		mmc_set_transfer_mode(host, data);
+
+	if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
+		return -1;
+
+	/*
+	 * CMDREG
+	 * CMDIDX[13:8]	: Command index
+	 * DATAPRNT[5]	: Data Present Select
+	 * ENCMDIDX[4]	: Command Index Check Enable
+	 * ENCMDCRC[3]	: Command CRC Check Enable
+	 * RSPTYP[1:0]
+	 *	00 = No Response
+	 *	01 = Length 136
+	 *	10 = Length 48
+	 *	11 = Length 48 Check busy after response
+	 */
+	if (!(cmd->resp_type & MMC_RSP_PRESENT))
+		flags = 0;
+	else if (cmd->resp_type & MMC_RSP_136)
+		flags = (1 << 0);
+	else if (cmd->resp_type & MMC_RSP_BUSY)
+		flags = (3 << 0);
+	else
+		flags = (2 << 0);
+
+	if (cmd->resp_type & MMC_RSP_CRC)
+		flags |= (1 << 3);
+	if (cmd->resp_type & MMC_RSP_OPCODE)
+		flags |= (1 << 4);
+	if (data)
+		flags |= (1 << 5);
+
+	dbg("cmd: %d\n", cmd->cmdidx);
+
+	writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg);
+
+	for (i = 0; i < retry; i++) {
+		mask = readl(&host->reg->norintsts);
+		/* Command Complete */
+		if (mask & (1 << 0)) {
+			if (!data)
+				writel(mask, &host->reg->norintsts);
+			break;
+		}
+	}
+
+	if (i == retry) {
+		printf("%s: waiting for status update\n", __func__);
+		return TIMEOUT;
+	}
+
+	if (mask & (1 << 16)) {
+		/* Timeout Error */
+		dbg("timeout: %08x cmd %d\n", mask, cmd->cmdidx);
+		return TIMEOUT;
+	} else if (mask & (1 << 15)) {
+		/* Error Interrupt */
+		dbg("error: %08x cmd %d\n", mask, cmd->cmdidx);
+		return -1;
+	}
+
+	if (cmd->resp_type & MMC_RSP_PRESENT) {
+		if (cmd->resp_type & MMC_RSP_136) {
+			/* CRC is stripped so we need to do some shifting. */
+			for (i = 0; i < 4; i++) {
+				unsigned int offset =
+					(unsigned int)(&host->reg->rspreg3 - i);
+				cmd->response[i] = readl(offset) << 8;
+
+				if (i != 3) {
+					cmd->response[i] |=
+						readb(offset - 1);
+				}
+				dbg("cmd->resp[%d]: %08x\n",
+						i, cmd->response[i]);
+			}
+		} else if (cmd->resp_type & MMC_RSP_BUSY) {
+			for (i = 0; i < retry; i++) {
+				/* PRNTDATA[23:20] : DAT[3:0] Line Signal */
+				if (readl(&host->reg->prnsts)
+					& (1 << 20))	/* DAT[0] */
+					break;
+			}
+
+			if (i == retry) {
+				printf("%s: card is still busy\n", __func__);
+				return TIMEOUT;
+			}
+
+			cmd->response[0] = readl(&host->reg->rspreg0);
+			dbg("cmd->resp[0]: %08x\n", cmd->response[0]);
+		} else {
+			cmd->response[0] = readl(&host->reg->rspreg0);
+			dbg("cmd->resp[0]: %08x\n", cmd->response[0]);
+		}
+	}
+
+	if (data) {
+		while (1) {
+			mask = readl(&host->reg->norintsts);
+
+			if (mask & (1 << 15)) {
+				/* Error Interrupt */
+				writel(mask, &host->reg->norintsts);
+				printf("%s: error during transfer: 0x%08x\n",
+						__func__, mask);
+				return -1;
+			} else if (mask & (1 << 3)) {
+				/* DMA Interrupt */
+				dbg("DMA end\n");
+				break;
+			} else if (mask & (1 << 1)) {
+				/* Transfer Complete */
+				dbg("r/w is done\n");
+				break;
+			}
+		}
+		writel(mask, &host->reg->norintsts);
+	}
+
+	udelay(1000);
+	return 0;
+}
+
+static void mmc_change_clock(struct mmc_host *host, uint clock)
+{
+	int div;
+	unsigned short clk;
+	unsigned long timeout;
+	unsigned long ctrl2;
+
+	/*
+	 * SELBASECLK[5:4]
+	 * 00/01 = HCLK
+	 * 10 = EPLL
+	 * 11 = XTI or XEXTCLK
+	 */
+	ctrl2 = readl(&host->reg->control2);
+	ctrl2 &= ~(3 << 4);
+	ctrl2 |= (2 << 4);
+	writel(ctrl2, &host->reg->control2);
+
+	writew(0, &host->reg->clkcon);
+
+	/* XXX: we assume that clock is between 40MHz and 50MHz */
+	if (clock == 0)
+		goto out;
+	else if (clock <= 400000)
+		div = 0x100;
+	else if (clock <= 20000000)
+		div = 4;
+	else if (clock <= 26000000)
+		div = 2;
+	else
+		div = 1;
+	dbg("div: %d\n", div);
+
+	div >>= 1;
+	/*
+	 * CLKCON
+	 * SELFREQ[15:8]	: base clock divied by value
+	 * ENSDCLK[2]		: SD Clock Enable
+	 * STBLINTCLK[1]	: Internal Clock Stable
+	 * ENINTCLK[0]		: Internal Clock Enable
+	 */
+	clk = (div << 8) | (1 << 0);
+	writew(clk, &host->reg->clkcon);
+
+	/* Wait max 10 ms */
+	timeout = 10;
+	while (!(readw(&host->reg->clkcon) & (1 << 1))) {
+		if (timeout == 0) {
+			printf("%s: timeout error\n", __func__);
+			return;
+		}
+		timeout--;
+		udelay(1000);
+	}
+
+	clk |= (1 << 2);
+	writew(clk, &host->reg->clkcon);
+
+out:
+	host->clock = clock;
+}
+
+static void mmc_set_ios(struct mmc *mmc)
+{
+	struct mmc_host *host = mmc->priv;
+	unsigned char ctrl;
+	unsigned long val;
+
+	dbg("set_ios: bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
+
+	/*
+	 * SELCLKPADDS[17:16]
+	 * 00 = 2mA
+	 * 01 = 4mA
+	 * 10 = 7mA
+	 * 11 = 9mA
+	 */
+	writel(0x3 << 16, &host->reg->control4);
+
+	val = readl(&host->reg->control2);
+	val &= (0x3 << 4);
+
+	val |=	(1 << 31) |	/* write status clear async mode enable */
+		(1 << 30) |	/* command conflict mask enable */
+		(1 << 14) |	/* Feedback Clock Enable for Rx Clock */
+		(1 << 8);	/* SDCLK hold enable */
+
+	writel(val, &host->reg->control2);
+
+	/*
+	 * FCSEL1[15] FCSEL0[7]
+	 * FCSel[1:0] : Rx Feedback Clock Delay Control
+	 *	Inverter delay means10ns delay if SDCLK 50MHz setting
+	 *	01 = Delay1 (basic delay)
+	 *	11 = Delay2 (basic delay + 2ns)
+	 *	00 = Delay3 (inverter delay)
+	 *	10 = Delay4 (inverter delay + 2ns)
+	 */
+	writel(0x8080, &host->reg->control3);
+
+	mmc_change_clock(host, mmc->clock);
+
+	ctrl = readb(&host->reg->hostctl);
+
+	/*
+	 * WIDE4[1]
+	 * 1 = 4-bit mode
+	 * 0 = 1-bit mode
+	 */
+	if (mmc->bus_width == 4)
+		ctrl |= (1 << 1);
+	else
+		ctrl &= ~(1 << 1);
+
+	/*
+	 * OUTEDGEINV[2]
+	 * 1 = Riging edge output
+	 * 0 = Falling edge output
+	 */
+	ctrl &= ~(1 << 2);
+
+	writeb(ctrl, &host->reg->hostctl);
+}
+
+static void mmc_reset(struct mmc_host *host)
+{
+	unsigned int timeout;
+
+	/*
+	 * RSTALL[0] : Software reset for all
+	 * 1 = reset
+	 * 0 = work
+	 */
+	writeb((1 << 0), &host->reg->swrst);
+
+	host->clock = 0;
+
+	/* Wait max 100 ms */
+	timeout = 100;
+
+	/* hw clears the bit when it's done */
+	while (readb(&host->reg->swrst) & (1 << 0)) {
+		if (timeout == 0) {
+			printf("%s: timeout error\n", __func__);
+			return;
+		}
+		timeout--;
+		udelay(1000);
+	}
+}
+
+static int mmc_core_init(struct mmc *mmc)
+{
+	struct mmc_host *host = (struct mmc_host *)mmc->priv;
+	unsigned int mask;
+
+	mmc_reset(host);
+
+	host->version = readw(&host->reg->hcver);
+
+	/* mask all */
+	writel(0xffffffff, &host->reg->norintstsen);
+	writel(0xffffffff, &host->reg->norintsigen);
+
+	writeb(0xe, &host->reg->timeoutcon);	/* TMCLK * 2^27 */
+
+	/*
+	 * NORMAL Interrupt Status Enable Register init
+	 * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable
+	 * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable
+	 * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable
+	 * [0] ENSTACMDCMPLT : Command Complete Status Enable
+	*/
+	mask = readl(&host->reg->norintstsen);
+	mask &= ~(0xffff);
+	mask |= (1 << 5) | (1 << 4) | (1 << 1) | (1 << 0);
+	writel(mask, &host->reg->norintstsen);
+
+	/*
+	 * NORMAL Interrupt Signal Enable Register init
+	 * [1] ENSTACMDCMPLT : Transfer Complete Signal Enable
+	 */
+	mask = readl(&host->reg->norintsigen);
+	mask &= ~(0xffff);
+	mask |= (1 << 1);
+	writel(mask, &host->reg->norintsigen);
+
+	return 0;
+}
+
+static int s5p_mmc_initialize(int dev_index)
+{
+	struct mmc *mmc;
+
+	mmc = &mmc_dev[dev_index];
+
+	sprintf(mmc->name, "SAMSUNG SD/MMC");
+	mmc->priv = &mmc_host[dev_index];
+	mmc->send_cmd = mmc_send_cmd;
+	mmc->set_ios = mmc_set_ios;
+	mmc->init = mmc_core_init;
+
+	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+	mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS;
+
+	mmc->f_min = 400000;
+	mmc->f_max = 52000000;
+
+	mmc_host[dev_index].clock = 0;
+	mmc_host[dev_index].reg = s5p_get_base_mmc(dev_index);
+	mmc_register(mmc);
+
+	return 0;
+}
+
+int s5p_mmc_init(int dev_index)
+{
+	return s5p_mmc_initialize(dev_index);
+}