Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (167 commits)
  OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer
  ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT
  ARM: omap3: Set SPL stack size to 8KB, image to 54KB.
  arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx
  OMAP4: Set fdt_high for OMAP4 devices to enable booting with Device Tree
  omap4: do not enable auxiliary cores
  omap4: do not enable fs-usb module
  omap4: panda: disable uart2 pads during boot
  igep00x0: change mpurate from 500 to auto
  igep00x0: enable the use of a plain text file
  tegra2: trivially enable 13 mhz crystal frequency
  tegra: Enable keyboard for Seaboard
  tegra: Switch on console mux and use environment for console
  tegra: Add tegra keyboard driver
  tegra: fdt: Add keyboard definitions for Seaboard
  tegra: fdt: Add keyboard controller definition
  tegra: Add keyboard support to funcmux
  input: Add support for keyboard matrix decoding from an fdt
  input: Add generic keyboard input handler
  input: Add linux/input.h for key code support
  fdt: Add fdtdec functions to read byte array
  tegra: Enable LP0 on Seaboard
  tegra: fdt: Add EMC data for Tegra2 Seaboard
  tegra: i2c: Add function to find DVC bus
  fdt: tegra: Add EMC node to device tree
  tegra: Add EMC settings for Seaboard
  tegra: Turn off power detect in board init
  tegra: Set up warmboot code on Nvidia boards
  tegra: Setup PMC scratch info from ap20 setup
  tegra: Add warmboot implementation
  tegra: Set up PMU for Nvidia boards
  tegra: Add PMU to manage power supplies
  tegra: Add EMC support for optimal memory timings
  tegra: Add header file for APB_MISC register
  tegra: Add tegra_get_chip_type() to detect SKU
  tegra: Add flow, gp_padctl, fuse, sdram headers
  tegra: Add crypto library for warmboot code
  tegra: Add functions to access low-level Osc/PLL details
  tegra: Move ap20.h header into arch location
  Add AES crypto library
  i2c: Add TPS6586X driver
  Add abs() macro to return absolute value
  fdt: Add function to return next compatible subnode
  fdt: Add function to locate an array in the device tree
  i.MX28: Avoid redefining serial_put[cs]()
  i.MX28: Check if WP detection is implemented at all
  i.MX28: Add battery boot components to SPL
  i.MX28: Reorder battery status functions in SPL
  i.MX28: Add LRADC init to i.MX28 SPL
  i.MX28: Add LRADC register definitions
  i.MX28: Shut down the LCD controller before reset
  i.MX28: Add LCDIF register definitions
  i.MX28: Implement boot pads sampling and reporting
  i.MX28: Improve passing of data from SPL to U-Boot
  M28EVK: Add SD update command
  M28EVK: Implement support for new board V2.0
  FEC: Abstract out register setup
  MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged
  i.MX28: Add delay after CPU bypass is cleared
  spi: mxs: Allow other chip selects to work
  spi: mxs: Introduce spi_cs_is_valid()
  mx53loco: Remove unneeded gpio_set_value()
  mx53loco: Add CONFIG_REVISION_TAG
  mx53loco: Turn on VUSB regulator
  mx53loco: Add mc34708 support and set mx53 frequency at 1GHz
  pmic: dialog: Avoid name conflicts
  imx: Add u-boot.imx as target for ARM9 i.MX SOCs
  i.MX2: Include asm/types.h in arch-mx25/imx-regs.h
  imx: usb: There is no such register
  i.MX25: usb: Set PORTSCx register
  imx: nand: Support flash based BBT
  i.MX25: This architecture has a GPIO4 too
  i.MX25: esdhc: Add mxc_get_clock infrastructure
  i.MX6: mx6q_sabrelite: add SATA bindings
  i.MX6: add enable_sata_clock()
  i.MX6: Add ANATOP regulator init
  mx28evk: add NAND support
  USB: ehci-mx6: Fix broken IO access
  M28: Scan only first 512 MB of DRAM to avoid memory wraparound
  Revert "i.MX28: Enable additional DRAM address bits"
  M28: Enable FDT support
  mx53loco: Add support for 1GHz operation for DA9053-based boards
  mx53loco: Allow to print CPU information at a later stage
  mx5: Add clock config interface
  imx-common: Factor out get_ahb_clk()
  i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow
  mx31pdk: Allow booting a zImage kernel
  mx6qarm2: Allow booting a zImage kernel
  mx6qsabrelite: Allow booting a zImage kernel
  mx28evk: Allow booting a zImage kernel
  m28evk: Allow to booting a dt kernel
  mx28evk: Allow to booting a dt kernel
  mx6qsabrelite: No need to set the direction for GPIO3_23 again
  pmic: Add support for the Dialog DA9053 PMIC
  MX53: mx53loco: Add SATA support
  MX53: Add support to ESG ima3 board
  SATA: add driver for MX5 / MX6 SOCs
  MX53: add function to set SATA clock to internal
  SATA: check for return value from sata functions
  MX5: Add definitions for SATA controller
  NET: fec_mxc.c: Add a way to disable auto negotiation
  Define UART4 and UART5 base addresses
  EXYNOS: Change bits per pixel value proper for u-boot.
  EXYNOS: support TRATS board display function
  LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI
  EXYNOS: support EXYNOS MIPI DSI interface driver.
  EXYNOS: support EXYNOS framebuffer and FIMD display drivers.
  LCD: add data structure for EXYNOS display driver
  EXYNOS: add LCD and MIPI DSI clock interface.
  EXYNOS: definitions of system resgister and power management registers.
  SMDK5250: fix compiler warning
  misc:pmic:samsung Convert TRATS target to use MAX8997 instead of MAX8998
  misc:pmic:max8997 MAX8997 support for PMIC driver
  TRATS: modify the trats's configuration
  ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement
  EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc
  arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
  arm: cam_enc_4xx: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
  cm-t35: add I2C multi-bus support
  include/configs: Remove CONFIG_SYS_64BIT_STRTOUL
  include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF
  omap3: Introduce weak misc_init_r
  omap730p2: Remove empty misc_init_r
  omap5912osk: Remove empty misc_init_r
  omap4+: Remove CONFIG_ARCH_CPU_INIT
  omap4: Remove CONFIG_SYS_MMC_SET_DEV
  OMAP3: pandora: drop console kernel argument
  OMAP3: pandora: revise GPIO configuration
  ...

2 files changed, 57 insertions, 7 deletions

diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
index 6572e95..4187a94 100644
--- a/drivers/mmc/mxsmmc.c
+++ b/drivers/mmc/mxsmmc.c
@@ -133,7 +133,8 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 		/* READ or WRITE */
 		if (data->flags & MMC_DATA_READ) {
 			ctrl0 |= SSP_CTRL0_READ;
-		} else if (priv->mmc_is_wp(mmc->block_dev.dev)) {
+		} else if (priv->mmc_is_wp &&
+			priv->mmc_is_wp(mmc->block_dev.dev)) {
 			printf("MMC%d: Can not write a locked card!\n",
 				mmc->block_dev.dev);
 			return UNUSABLE_ERR;
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index f2a7a78..afd9b30 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -29,6 +29,7 @@
 #include <i2c.h>
 #include <twl4030.h>
 #include <twl6030.h>
+#include <twl6035.h>
 #include <asm/io.h>
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/sys_proto.h>
@@ -49,8 +50,8 @@ static struct mmc hsmmc_dev[2];
 static void omap4_vmmc_pbias_config(struct mmc *mmc)
 {
 	u32 value = 0;
-	struct omap4_sys_ctrl_regs *const ctrl =
-		(struct omap4_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE;
+	struct omap_sys_ctrl_regs *const ctrl =
+		(struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
 
 
 	value = readl(&ctrl->control_pbiaslite);
@@ -64,6 +65,34 @@ static void omap4_vmmc_pbias_config(struct mmc *mmc)
 }
 #endif
 
+#if defined(CONFIG_OMAP54XX) && defined(CONFIG_TWL6035_POWER)
+static void omap5_pbias_config(struct mmc *mmc)
+{
+	u32 value = 0;
+	struct omap_sys_ctrl_regs *const ctrl =
+		(struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
+
+	value = readl(&ctrl->control_pbias);
+	value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
+	value |= SDCARD_BIAS_HIZ_MODE;
+	writel(value, &ctrl->control_pbias);
+
+	twl6035_mmc1_poweron_ldo();
+
+	value = readl(&ctrl->control_pbias);
+	value &= ~SDCARD_BIAS_HIZ_MODE;
+	value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ;
+	writel(value, &ctrl->control_pbias);
+
+	value = readl(&ctrl->control_pbias);
+	if (value & (1 << 23)) {
+		value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
+		value |= SDCARD_BIAS_HIZ_MODE;
+		writel(value, &ctrl->control_pbias);
+	}
+}
+#endif
+
 unsigned char mmc_board_init(struct mmc *mmc)
 {
 #if defined(CONFIG_OMAP34XX)
@@ -90,6 +119,11 @@ unsigned char mmc_board_init(struct mmc *mmc)
 	writel(readl(&t2_base->devconf1) | MMCSDIO2ADPCLKISEL,
 		&t2_base->devconf1);
 
+	/* Change from default of 52MHz to 26MHz if necessary */
+	if (!(mmc->host_caps & MMC_MODE_HS_52MHz))
+		writel(readl(&t2_base->ctl_prog_io1) & ~CTLPROGIO1SPEEDCTRL,
+			&t2_base->ctl_prog_io1);
+
 	writel(readl(&prcm_base->fclken1_core) |
 		EN_MMC1 | EN_MMC2 | EN_MMC3,
 		&prcm_base->fclken1_core);
@@ -104,6 +138,10 @@ unsigned char mmc_board_init(struct mmc *mmc)
 	if (mmc->block_dev.dev == 0)
 		omap4_vmmc_pbias_config(mmc);
 #endif
+#if defined(CONFIG_OMAP54XX) && defined(CONFIG_TWL6035_POWER)
+	if (mmc->block_dev.dev == 0)
+		omap5_pbias_config(mmc);
+#endif
 
 	return 0;
 }
@@ -502,7 +540,7 @@ static void mmc_set_ios(struct mmc *mmc)
 	writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl);
 }
 
-int omap_mmc_init(int dev_index)
+int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max)
 {
 	struct mmc *mmc;
 
@@ -533,11 +571,22 @@ int omap_mmc_init(int dev_index)
 		return 1;
 	}
 	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
-	mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS |
-				MMC_MODE_HC;
+	mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS |
+				MMC_MODE_HC) & ~host_caps_mask;
 
 	mmc->f_min = 400000;
-	mmc->f_max = 52000000;
+
+	if (f_max != 0)
+		mmc->f_max = f_max;
+	else {
+		if (mmc->host_caps & MMC_MODE_HS) {
+			if (mmc->host_caps & MMC_MODE_HS_52MHz)
+				mmc->f_max = 52000000;
+			else
+				mmc->f_max = 26000000;
+		} else
+			mmc->f_max = 20000000;
+	}
 
 	mmc->b_max = 0;