summaryrefslogtreecommitdiff
path: root/drivers/mmc
diff options
context:
space:
mode:
authorPavel Machek <pavel@denx.de>2014-09-05 12:49:48 +0200
committerMarek Vasut <marex@denx.de>2014-10-06 17:34:39 +0200
commitf33c9305830d5f8b996a2aaea66591dc93143fe5 (patch)
treeb4a309c5185bad7f046c9ce81215ba24fa8a5ea9 /drivers/mmc
parentbe9f643ae6aa9044c60fe80e3a2c10be8371c692 (diff)
downloadu-boot-imx-f33c9305830d5f8b996a2aaea66591dc93143fe5.zip
u-boot-imx-f33c9305830d5f8b996a2aaea66591dc93143fe5.tar.gz
u-boot-imx-f33c9305830d5f8b996a2aaea66591dc93143fe5.tar.bz2
mmc: dw_mmc: cleanups
The dw_mmc driver was responding to errors with debug(). Change that to prinf()/puts() respectively so that any errors are immediately obvious. Also adjust english in comments. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Chin Liang See <clsee@altera.com>
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/dw_mmc.c34
1 files changed, 22 insertions, 12 deletions
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 0df30bc..785eed5 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -119,7 +119,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
if (get_timer(start) > timeout) {
- printf("Timeout on data busy\n");
+ printf("%s: Timeout on data busy\n", __func__);
return TIMEOUT;
}
}
@@ -177,14 +177,24 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
}
}
- if (i == retry)
+ if (i == retry) {
+ printf("%s: Timeout.\n", __func__);
return TIMEOUT;
+ }
if (mask & DWMCI_INTMSK_RTO) {
- debug("Response Timeout..\n");
+ /*
+ * Timeout here is not necessarily fatal. (e)MMC cards
+ * will splat here when they receive CMD55 as they do
+ * not support this command and that is exactly the way
+ * to tell them apart from SD cards. Thus, this output
+ * below shall be debug(). eMMC cards also do not favor
+ * CMD8, please keep that in mind.
+ */
+ debug("%s: Response Timeout.\n", __func__);
return TIMEOUT;
} else if (mask & DWMCI_INTMSK_RE) {
- debug("Response Error..\n");
+ printf("%s: Response Error.\n", __func__);
return -1;
}
@@ -204,7 +214,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
do {
mask = dwmci_readl(host, DWMCI_RINTSTS);
if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) {
- debug("DATA ERROR!\n");
+ printf("%s: DATA ERROR!\n", __func__);
return -1;
}
} while (!(mask & DWMCI_INTMSK_DTO));
@@ -232,16 +242,16 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
if ((freq == host->clock) || (freq == 0))
return 0;
/*
- * If host->get_mmc_clk didn't define,
+ * If host->get_mmc_clk isn't defined,
* then assume that host->bus_hz is source clock value.
- * host->bus_hz should be set from user.
+ * host->bus_hz should be set by user.
*/
if (host->get_mmc_clk)
sclk = host->get_mmc_clk(host);
else if (host->bus_hz)
sclk = host->bus_hz;
else {
- printf("Didn't get source clock value..\n");
+ printf("%s: Didn't get source clock value.\n", __func__);
return -EINVAL;
}
@@ -260,7 +270,7 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
do {
status = dwmci_readl(host, DWMCI_CMD);
if (timeout-- < 0) {
- printf("TIMEOUT error!!\n");
+ printf("%s: Timeout!\n", __func__);
return -ETIMEDOUT;
}
} while (status & DWMCI_CMD_START);
@@ -275,7 +285,7 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
do {
status = dwmci_readl(host, DWMCI_CMD);
if (timeout-- < 0) {
- printf("TIMEOUT error!!\n");
+ printf("%s: Timeout!\n", __func__);
return -ETIMEDOUT;
}
} while (status & DWMCI_CMD_START);
@@ -290,7 +300,7 @@ static void dwmci_set_ios(struct mmc *mmc)
struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
u32 ctype, regs;
- debug("Buswidth = %d, clock: %d\n",mmc->bus_width, mmc->clock);
+ debug("Buswidth = %d, clock: %d\n", mmc->bus_width, mmc->clock);
dwmci_setup_bus(host, mmc->clock);
switch (mmc->bus_width) {
@@ -329,7 +339,7 @@ static int dwmci_init(struct mmc *mmc)
dwmci_writel(host, DWMCI_PWREN, 1);
if (!dwmci_wait_reset(host, DWMCI_RESET_ALL)) {
- debug("%s[%d] Fail-reset!!\n",__func__,__LINE__);
+ printf("%s[%d] Fail-reset!!\n", __func__, __LINE__);
return -1;
}