summaryrefslogtreecommitdiff
path: root/drivers/mmc
diff options
context:
space:
mode:
authorAndrew Gabbasov <andrew_gabbasov@mentor.com>2013-06-11 10:34:22 -0500
committerAndy Fleming <afleming@freescale.com>2013-06-13 16:52:19 -0500
commit01b77353e45f99daf3b3e598b9addf9365c7c47a (patch)
treec06685ee6d0dcef6662993b2325bbc0f5a228a40 /drivers/mmc
parentc2137b10a491168d23d1275997eedd3f9ec4f0cf (diff)
downloadu-boot-imx-01b77353e45f99daf3b3e598b9addf9365c7c47a.zip
u-boot-imx-01b77353e45f99daf3b3e598b9addf9365c7c47a.tar.gz
u-boot-imx-01b77353e45f99daf3b3e598b9addf9365c7c47a.tar.bz2
fsl_esdhc: Do not clear interrupt status bits until data processed
After waiting for the command completion event, the interrupt status bits, that occured to be set by that time, are cleared by writing them back. It is supposed, that it should be command related bits (command complete and may be command errors). However, in some cases the DMA already completes by that time before the full transaction completes. The corresponding DINT bit gets set and then cleared before even entering the loop, waiting for data part completion. That waiting loop never gets this bit set, causing the operation to hang. This is reported to happen, for example, for write operation of 1 sector to upper area (block #7400000) of SanDisk Ultra II 8GB card. The solution could be to explicitly clear only command related interrupt status bits. However, since subsequent processing does not rely on any command bits state, it could be easier just to remove clearing of any bits at that point, leaving them all until all data processing completes. After that the whole register will be cleared at once. Also, on occasion, interrupts masking moved to before writing the command, just for the case there should be no chance of interrupt between the first command and interrupts masking. Reported-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/fsl_esdhc.c7
1 files changed, 3 insertions, 4 deletions
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index ec01795..973b19f 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -310,6 +310,9 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
/* Figure out the transfer arguments */
xfertyp = esdhc_xfertyp(cmd, data);
+ /* Mask all irqs */
+ esdhc_write32(&regs->irqsigen, 0);
+
/* Send the command */
esdhc_write32(&regs->cmdarg, cmd->cmdarg);
#if defined(CONFIG_FSL_USDHC)
@@ -320,15 +323,11 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
esdhc_write32(&regs->xfertyp, xfertyp);
#endif
- /* Mask all irqs */
- esdhc_write32(&regs->irqsigen, 0);
-
/* Wait for the command to complete */
while (!(esdhc_read32(&regs->irqstat) & (IRQSTAT_CC | IRQSTAT_CTOE)))
;
irqstat = esdhc_read32(&regs->irqstat);
- esdhc_write32(&regs->irqstat, irqstat);
/* Reset CMD and DATA portions on error */
if (irqstat & (CMD_ERR | IRQSTAT_CTOE)) {