Merge branch 'master' of git://git.denx.de/u-boot-arm

3 files changed, 265 insertions, 23 deletions

diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 4070d4e..5da20ed 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -129,13 +129,13 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 	unsigned int timeout = 100000;
 	u32 retry = 10000;
 	u32 mask, ctrl;
+	ulong start = get_timer(0);
 
 	while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
-		if (timeout == 0) {
+		if (get_timer(start) > timeout) {
 			printf("Timeout on data busy\n");
 			return TIMEOUT;
 		}
-		timeout--;
 	}
 
 	dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
@@ -143,7 +143,6 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 	if (data)
 		dwmci_prepare_data(host, data);
 
-
 	dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
 
 	if (data)
@@ -231,9 +230,8 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
 	int timeout = 10000;
 	unsigned long sclk;
 
-	if (freq == host->clock)
+	if ((freq == host->clock) || (freq == 0))
 		return 0;
-
 	/*
 	 * If host->mmc_clk didn't define,
 	 * then assume that host->bus_hz is source clock value.
@@ -314,7 +312,7 @@ static void dwmci_set_ios(struct mmc *mmc)
 static int dwmci_init(struct mmc *mmc)
 {
 	struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
-	u32 fifo_size, fifoth_val;
+	u32 fifo_size;
 
 	dwmci_writel(host, DWMCI_PWREN, 1);
 
@@ -323,6 +321,9 @@ static int dwmci_init(struct mmc *mmc)
 		return -1;
 	}
 
+	/* Enumerate at 400KHz */
+	dwmci_setup_bus(host, mmc->f_min);
+
 	dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
 	dwmci_writel(host, DWMCI_INTMASK, 0);
 
@@ -331,13 +332,13 @@ static int dwmci_init(struct mmc *mmc)
 	dwmci_writel(host, DWMCI_IDINTEN, 0);
 	dwmci_writel(host, DWMCI_BMOD, 1);
 
-	fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
-	if (host->fifoth_val)
-		fifoth_val = host->fifoth_val;
-	else
-		fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) |
-			TX_WMARK(fifo_size/2);
-	dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
+	if (!host->fifoth_val) {
+		fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
+		fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
+		host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
+			TX_WMARK(fifo_size / 2);
+	}
+	dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
 
 	dwmci_writel(host, DWMCI_CLKENA, 0);
 	dwmci_writel(host, DWMCI_CLKSRC, 0);
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index 72a31b7..4238dd9 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -19,39 +19,146 @@
  */
 
 #include <common.h>
-#include <malloc.h>
 #include <dwmmc.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <malloc.h>
 #include <asm/arch/dwmmc.h>
 #include <asm/arch/clk.h>
+#include <asm/arch/pinmux.h>
 
-static char *EXYNOS_NAME = "EXYNOS DWMMC";
+#define	DWMMC_MAX_CH_NUM		4
+#define	DWMMC_MAX_FREQ			52000000
+#define	DWMMC_MIN_FREQ			400000
+#define	DWMMC_MMC0_CLKSEL_VAL		0x03030001
+#define	DWMMC_MMC2_CLKSEL_VAL		0x03020001
 
+/*
+ * Function used as callback function to initialise the
+ * CLKSEL register for every mmc channel.
+ */
 static void exynos_dwmci_clksel(struct dwmci_host *host)
 {
-	u32 val;
-	val = DWMCI_SET_SAMPLE_CLK(DWMCI_SHIFT_0) |
-		DWMCI_SET_DRV_CLK(DWMCI_SHIFT_0) | DWMCI_SET_DIV_RATIO(0);
+	dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val);
+}
 
-	dwmci_writel(host, DWMCI_CLKSEL, val);
+unsigned int exynos_dwmci_get_clk(int dev_index)
+{
+	return get_mmc_clk(dev_index);
 }
 
-int exynos_dwmci_init(u32 regbase, int bus_width, int index)
+/*
+ * This function adds the mmc channel to be registered with mmc core.
+ * index -	mmc channel number.
+ * regbase -	register base address of mmc channel specified in 'index'.
+ * bus_width -	operating bus width of mmc channel specified in 'index'.
+ * clksel -	value to be written into CLKSEL register in case of FDT.
+ *		NULL in case od non-FDT.
+ */
+int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
 {
 	struct dwmci_host *host = NULL;
+	unsigned int div;
+	unsigned long freq, sclk;
 	host = malloc(sizeof(struct dwmci_host));
 	if (!host) {
 		printf("dwmci_host malloc fail!\n");
 		return 1;
 	}
+	/* request mmc clock vlaue of 52MHz.  */
+	freq = 52000000;
+	sclk = get_mmc_clk(index);
+	div = DIV_ROUND_UP(sclk, freq);
+	/* set the clock divisor for mmc */
+	set_mmc_clk(index, div);
 
-	host->name = EXYNOS_NAME;
+	host->name = "EXYNOS DWMMC";
 	host->ioaddr = (void *)regbase;
 	host->buswidth = bus_width;
+
+	if (clksel) {
+		host->clksel_val = clksel;
+	} else {
+		if (0 == index)
+			host->clksel_val = DWMMC_MMC0_CLKSEL_VAL;
+		if (2 == index)
+			host->clksel_val = DWMMC_MMC2_CLKSEL_VAL;
+	}
+
 	host->clksel = exynos_dwmci_clksel;
 	host->dev_index = index;
+	host->mmc_clk = exynos_dwmci_get_clk;
+	/* Add the mmc channel to be registered with mmc core */
+	if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {
+		debug("dwmmc%d registration failed\n", index);
+		return -1;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_OF_CONTROL
+int exynos_dwmmc_init(const void *blob)
+{
+	int index, bus_width;
+	int node_list[DWMMC_MAX_CH_NUM];
+	int err = 0, dev_id, flag, count, i;
+	u32 clksel_val, base, timing[3];
+
+	count = fdtdec_find_aliases_for_id(blob, "mmc",
+				COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list,
+				DWMMC_MAX_CH_NUM);
+
+	for (i = 0; i < count; i++) {
+		int node = node_list[i];
+
+		if (node <= 0)
+			continue;
 
-	add_dwmci(host, 52000000, 400000);
+		/* Extract device id for each mmc channel */
+		dev_id = pinmux_decode_periph_id(blob, node);
 
+		/* Get the bus width from the device node */
+		bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
+		if (bus_width <= 0) {
+			debug("DWMMC: Can't get bus-width\n");
+			return -1;
+		}
+		if (8 == bus_width)
+			flag = PINMUX_FLAG_8BIT_MODE;
+		else
+			flag = PINMUX_FLAG_NONE;
+
+		/* config pinmux for each mmc channel */
+		err = exynos_pinmux_config(dev_id, flag);
+		if (err) {
+			debug("DWMMC not configured\n");
+			return err;
+		}
+
+		index = dev_id - PERIPH_ID_SDMMC0;
+
+		/* Get the base address from the device node */
+		base = fdtdec_get_addr(blob, node, "reg");
+		if (!base) {
+			debug("DWMMC: Can't get base address\n");
+			return -1;
+		}
+		/* Extract the timing info from the node */
+		err = fdtdec_get_int_array(blob, node, "samsung,timing",
+					timing, 3);
+		if (err) {
+			debug("Can't get sdr-timings for divider\n");
+			return -1;
+		}
+
+		clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
+				DWMCI_SET_DRV_CLK(timing[1]) |
+				DWMCI_SET_DIV_RATIO(timing[2]));
+		/* Initialise each mmc channel */
+		err = exynos_dwmci_add_port(index, base, bus_width, clksel_val);
+		if (err)
+			debug("dwmmc Channel-%d init failed\n", index);
+	}
 	return 0;
 }
-
+#endif
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index e6a296a..83d2df7 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1503,3 +1503,137 @@ int mmc_initialize(bd_t *bis)
 	do_preinit();
 	return 0;
 }
+
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+/*
+ * This function changes the size of boot partition and the size of rpmb
+ * partition present on EMMC devices.
+ *
+ * Input Parameters:
+ * struct *mmc: pointer for the mmc device strcuture
+ * bootsize: size of boot partition
+ * rpmbsize: size of rpmb partition
+ *
+ * Returns 0 on success.
+ */
+
+int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
+				unsigned long rpmbsize)
+{
+	int err;
+	struct mmc_cmd cmd;
+
+	/* Only use this command for raw EMMC moviNAND. Enter backdoor mode */
+	cmd.cmdidx = MMC_CMD_RES_MAN;
+	cmd.resp_type = MMC_RSP_R1b;
+	cmd.cmdarg = MMC_CMD62_ARG1;
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		debug("mmc_boot_partition_size_change: Error1 = %d\n", err);
+		return err;
+	}
+
+	/* Boot partition changing mode */
+	cmd.cmdidx = MMC_CMD_RES_MAN;
+	cmd.resp_type = MMC_RSP_R1b;
+	cmd.cmdarg = MMC_CMD62_ARG2;
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		debug("mmc_boot_partition_size_change: Error2 = %d\n", err);
+		return err;
+	}
+	/* boot partition size is multiple of 128KB */
+	bootsize = (bootsize * 1024) / 128;
+
+	/* Arg: boot partition size */
+	cmd.cmdidx = MMC_CMD_RES_MAN;
+	cmd.resp_type = MMC_RSP_R1b;
+	cmd.cmdarg = bootsize;
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		debug("mmc_boot_partition_size_change: Error3 = %d\n", err);
+		return err;
+	}
+	/* RPMB partition size is multiple of 128KB */
+	rpmbsize = (rpmbsize * 1024) / 128;
+	/* Arg: RPMB partition size */
+	cmd.cmdidx = MMC_CMD_RES_MAN;
+	cmd.resp_type = MMC_RSP_R1b;
+	cmd.cmdarg = rpmbsize;
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		debug("mmc_boot_partition_size_change: Error4 = %d\n", err);
+		return err;
+	}
+	return 0;
+}
+
+/*
+ * This function shall form and send the commands to open / close the
+ * boot partition specified by user.
+ *
+ * Input Parameters:
+ * ack: 0x0 - No boot acknowledge sent (default)
+ *	0x1 - Boot acknowledge sent during boot operation
+ * part_num: User selects boot data that will be sent to master
+ *	0x0 - Device not boot enabled (default)
+ *	0x1 - Boot partition 1 enabled for boot
+ *	0x2 - Boot partition 2 enabled for boot
+ * access: User selects partitions to access
+ *	0x0 : No access to boot partition (default)
+ *	0x1 : R/W boot partition 1
+ *	0x2 : R/W boot partition 2
+ *	0x3 : R/W Replay Protected Memory Block (RPMB)
+ *
+ * Returns 0 on success.
+ */
+int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
+{
+	int err;
+	struct mmc_cmd cmd;
+
+	/* Boot ack enable, boot partition enable , boot partition access */
+	cmd.cmdidx = MMC_CMD_SWITCH;
+	cmd.resp_type = MMC_RSP_R1b;
+
+	cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+			(EXT_CSD_PART_CONF << 16) |
+			((EXT_CSD_BOOT_ACK(ack) |
+			EXT_CSD_BOOT_PART_NUM(part_num) |
+			EXT_CSD_PARTITION_ACCESS(access)) << 8);
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		if (access) {
+			debug("mmc boot partition#%d open fail:Error1 = %d\n",
+			      part_num, err);
+		} else {
+			debug("mmc boot partition#%d close fail:Error = %d\n",
+			      part_num, err);
+		}
+		return err;
+	}
+
+	if (access) {
+		/* 4bit transfer mode at booting time. */
+		cmd.cmdidx = MMC_CMD_SWITCH;
+		cmd.resp_type = MMC_RSP_R1b;
+
+		cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+				(EXT_CSD_BOOT_BUS_WIDTH << 16) |
+				((1 << 0) << 8);
+
+		err = mmc_send_cmd(mmc, &cmd, NULL);
+		if (err) {
+			debug("mmc boot partition#%d open fail:Error2 = %d\n",
+			      part_num, err);
+			return err;
+		}
+	}
+	return 0;
+}
+#endif