diff options
author | Marek Vasut <marex@denx.de> | 2012-07-06 21:25:54 +0000 |
---|---|---|
committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2012-09-01 14:58:17 +0200 |
commit | 401650a19c9c1d197e9791e82c5fc5af1ed6619d (patch) | |
tree | f5c07b35c567138ed384bc3749e27eeb0416076b /drivers/mmc/mxsmmc.c | |
parent | 41e5497225bed92fc745bdd5521bc93b838940ff (diff) | |
download | u-boot-imx-401650a19c9c1d197e9791e82c5fc5af1ed6619d.zip u-boot-imx-401650a19c9c1d197e9791e82c5fc5af1ed6619d.tar.gz u-boot-imx-401650a19c9c1d197e9791e82c5fc5af1ed6619d.tar.bz2 |
MX28: Fix up the MMC driver DMA mode
The DMA mode didn't properly configure the DMA_ENABLE bit in CTRL1.
Also, it was using SSP0 DMA channel for all SSP devices.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@freescale.com>
Cc: Andy Fleming <afleming@freescale.com>
Diffstat (limited to 'drivers/mmc/mxsmmc.c')
-rw-r--r-- | drivers/mmc/mxsmmc.c | 10 |
1 files changed, 8 insertions, 2 deletions
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index b7ad9ca..2480a8a 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -79,6 +79,7 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) uint32_t *data_ptr; #else uint32_t cache_data_count; + int dmach; #endif debug("MMC%d: CMD%d\n", mmc->block_dev.dev, cmd->cmdidx); @@ -201,6 +202,8 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) timeout = MXSMMC_MAX_TIMEOUT; #ifdef CONFIG_MXS_MMC_DMA + writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_set); + if (data_count % ARCH_DMA_MINALIGN) cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN); else @@ -222,8 +225,9 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) (data_count << MXS_DMA_DESC_BYTES_OFFSET); - mxs_dma_desc_append(MXS_DMA_CHANNEL_AHB_APBH_SSP0, priv->desc); - if (mxs_dma_go(MXS_DMA_CHANNEL_AHB_APBH_SSP0)) { + dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id; + mxs_dma_desc_append(dmach, priv->desc); + if (mxs_dma_go(dmach)) { printf("MMC%d: DMA transfer failed\n", mmc->block_dev.dev); return COMM_ERR; } @@ -234,6 +238,8 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) (uint32_t)(priv->desc->cmd.address + cache_data_count)); } #else + writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_clr); + if (data->flags & MMC_DATA_READ) { data_ptr = (uint32_t *)data->dest; while (data_count && --timeout) { |