cros_ec: Remove the old tunnel code

This is not needed with driver mode. Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 1 insertions, 267 deletions

diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c
index 6027177..ba36795 100644
--- a/drivers/misc/cros_ec.c
+++ b/drivers/misc/cros_ec.c
@@ -1055,87 +1055,6 @@ int cros_ec_decode_ec_flash(const void *blob, int node,
 	return 0;
 }
 
-int cros_ec_i2c_xfer_old(struct cros_ec_dev *dev, uchar chip, uint addr,
-			 int alen, uchar *buffer, int len, int is_read)
-{
-	union {
-		struct ec_params_i2c_passthru p;
-		uint8_t outbuf[EC_PROTO2_MAX_PARAM_SIZE];
-	} params;
-	union {
-		struct ec_response_i2c_passthru r;
-		uint8_t inbuf[EC_PROTO2_MAX_PARAM_SIZE];
-	} response;
-	struct ec_params_i2c_passthru *p = &params.p;
-	struct ec_response_i2c_passthru *r = &response.r;
-	struct ec_params_i2c_passthru_msg *msg = p->msg;
-	uint8_t *pdata;
-	int read_len, write_len;
-	int size;
-	int rv;
-
-	p->port = 0;
-
-	if (alen != 1) {
-		printf("Unsupported address length %d\n", alen);
-		return -1;
-	}
-	if (is_read) {
-		read_len = len;
-		write_len = alen;
-		p->num_msgs = 2;
-	} else {
-		read_len = 0;
-		write_len = alen + len;
-		p->num_msgs = 1;
-	}
-
-	size = sizeof(*p) + p->num_msgs * sizeof(*msg);
-	if (size + write_len > sizeof(params)) {
-		puts("Params too large for buffer\n");
-		return -1;
-	}
-	if (sizeof(*r) + read_len > sizeof(response)) {
-		puts("Read length too big for buffer\n");
-		return -1;
-	}
-
-	/* Create a message to write the register address and optional data */
-	pdata = (uint8_t *)p + size;
-	msg->addr_flags = chip;
-	msg->len = write_len;
-	pdata[0] = addr;
-	if (!is_read)
-		memcpy(pdata + 1, buffer, len);
-	msg++;
-
-	if (read_len) {
-		msg->addr_flags = chip | EC_I2C_FLAG_READ;
-		msg->len = read_len;
-	}
-
-	rv = ec_command(dev, EC_CMD_I2C_PASSTHRU, 0, p, size + write_len,
-			r, sizeof(*r) + read_len);
-	if (rv < 0)
-		return rv;
-
-	/* Parse response */
-	if (r->i2c_status & EC_I2C_STATUS_ERROR) {
-		printf("Transfer failed with status=0x%x\n", r->i2c_status);
-		return -1;
-	}
-
-	if (rv < sizeof(*r) + read_len) {
-		puts("Truncated read response\n");
-		return -1;
-	}
-
-	if (read_len)
-		memcpy(buffer, r->data, read_len);
-
-	return 0;
-}
-
 int cros_ec_i2c_tunnel(struct udevice *dev, struct i2c_msg *in, int nmsgs)
 {
 	struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
@@ -1266,187 +1185,6 @@ static int do_read_write(struct cros_ec_dev *dev, int is_write, int argc,
 	return 0;
 }
 
-/**
- * get_alen() - Small parser helper function to get address length
- *
- * Returns the address length.
- */
-static uint get_alen(char *arg)
-{
-	int	j;
-	int	alen;
-
-	alen = 1;
-	for (j = 0; j < 8; j++) {
-		if (arg[j] == '.') {
-			alen = arg[j+1] - '0';
-			break;
-		} else if (arg[j] == '\0') {
-			break;
-		}
-	}
-	return alen;
-}
-
-#define DISP_LINE_LEN	16
-
-/*
- * TODO(sjg@chromium.org): This code copied almost verbatim from cmd_i2c.c
- * so we can remove it later.
- */
-static int cros_ec_i2c_md(struct cros_ec_dev *dev, int flag, int argc,
-			  char * const argv[])
-{
-	u_char	chip;
-	uint	addr, alen, length = 0x10;
-	int	j, nbytes, linebytes;
-
-	if (argc < 2)
-		return CMD_RET_USAGE;
-
-	if (1 || (flag & CMD_FLAG_REPEAT) == 0) {
-		/*
-		 * New command specified.
-		 */
-
-		/*
-		 * I2C chip address
-		 */
-		chip = simple_strtoul(argv[0], NULL, 16);
-
-		/*
-		 * I2C data address within the chip.  This can be 1 or
-		 * 2 bytes long.  Some day it might be 3 bytes long :-).
-		 */
-		addr = simple_strtoul(argv[1], NULL, 16);
-		alen = get_alen(argv[1]);
-		if (alen > 3)
-			return CMD_RET_USAGE;
-
-		/*
-		 * If another parameter, it is the length to display.
-		 * Length is the number of objects, not number of bytes.
-		 */
-		if (argc > 2)
-			length = simple_strtoul(argv[2], NULL, 16);
-	}
-
-	/*
-	 * Print the lines.
-	 *
-	 * We buffer all read data, so we can make sure data is read only
-	 * once.
-	 */
-	nbytes = length;
-	do {
-		unsigned char	linebuf[DISP_LINE_LEN];
-		unsigned char	*cp;
-
-		linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
-
-		if (cros_ec_i2c_xfer_old(dev, chip, addr, alen, linebuf,
-					 linebytes, 1))
-			puts("Error reading the chip.\n");
-		else {
-			printf("%04x:", addr);
-			cp = linebuf;
-			for (j = 0; j < linebytes; j++) {
-				printf(" %02x", *cp++);
-				addr++;
-			}
-			puts("    ");
-			cp = linebuf;
-			for (j = 0; j < linebytes; j++) {
-				if ((*cp < 0x20) || (*cp > 0x7e))
-					puts(".");
-				else
-					printf("%c", *cp);
-				cp++;
-			}
-			putc('\n');
-		}
-		nbytes -= linebytes;
-	} while (nbytes > 0);
-
-	return 0;
-}
-
-static int cros_ec_i2c_mw(struct cros_ec_dev *dev, int flag, int argc,
-			  char * const argv[])
-{
-	uchar	chip;
-	ulong	addr;
-	uint	alen;
-	uchar	byte;
-	int	count;
-
-	if ((argc < 3) || (argc > 4))
-		return CMD_RET_USAGE;
-
-	/*
-	 * Chip is always specified.
-	 */
-	chip = simple_strtoul(argv[0], NULL, 16);
-
-	/*
-	 * Address is always specified.
-	 */
-	addr = simple_strtoul(argv[1], NULL, 16);
-	alen = get_alen(argv[1]);
-	if (alen > 3)
-		return CMD_RET_USAGE;
-
-	/*
-	 * Value to write is always specified.
-	 */
-	byte = simple_strtoul(argv[2], NULL, 16);
-
-	/*
-	 * Optional count
-	 */
-	if (argc == 4)
-		count = simple_strtoul(argv[3], NULL, 16);
-	else
-		count = 1;
-
-	while (count-- > 0) {
-		if (cros_ec_i2c_xfer_old(dev, chip, addr++, alen, &byte, 1, 0))
-			puts("Error writing the chip.\n");
-		/*
-		 * Wait for the write to complete.  The write can take
-		 * up to 10mSec (we allow a little more time).
-		 */
-/*
- * No write delay with FRAM devices.
- */
-#if !defined(CONFIG_SYS_I2C_FRAM)
-		udelay(11000);
-#endif
-	}
-
-	return 0;
-}
-
-/* Temporary code until we have driver model and can use the i2c command */
-static int cros_ec_i2c_passthrough(struct cros_ec_dev *dev, int flag,
-				   int argc, char * const argv[])
-{
-	const char *cmd;
-
-	if (argc < 1)
-		return CMD_RET_USAGE;
-	cmd = *argv++;
-	argc--;
-	if (0 == strcmp("md", cmd))
-		cros_ec_i2c_md(dev, flag, argc, argv);
-	else if (0 == strcmp("mw", cmd))
-		cros_ec_i2c_mw(dev, flag, argc, argv);
-	else
-		return CMD_RET_USAGE;
-
-	return 0;
-}
-
 static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	struct cros_ec_dev *dev;
@@ -1696,8 +1434,6 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			debug("%s: Could not access LDO%d\n", __func__, index);
 			return ret;
 		}
-	} else if (0 == strcmp("i2c", cmd)) {
-		ret = cros_ec_i2c_passthrough(dev, flag, argc - 2, argv + 2);
 	} else {
 		return CMD_RET_USAGE;
 	}
@@ -1734,9 +1470,7 @@ U_BOOT_CMD(
 	"crosec vbnvcontext [hexstring]        Read [write] VbNvContext from EC\n"
 	"crosec ldo <idx> [<state>] Switch/Read LDO state\n"
 	"crosec test                run tests on cros_ec\n"
-	"crosec version             Read CROS-EC version\n"
-	"crosec i2c md chip address[.0, .1, .2] [# of objects] - read from I2C passthru\n"
-	"crosec i2c mw chip address[.0, .1, .2] value [count] - write to I2C passthru (fill)"
+	"crosec version             Read CROS-EC version"
 );
 #endif