summaryrefslogtreecommitdiff
path: root/drivers/misc
diff options
context:
space:
mode:
authorStefano Babic <sbabic@denx.de>2011-01-20 07:51:31 +0000
committerAlbert Aribaud <albert.aribaud@free.fr>2011-02-02 00:54:43 +0100
commit81687212ee0b4fcb11f7d6700275b062c8f8d2b4 (patch)
tree309e26d1095c1a32d715380baa655f10f7e80f9b /drivers/misc
parent1d549ade61078b50e68ff867fe59401bb5c2db9b (diff)
downloadu-boot-imx-81687212ee0b4fcb11f7d6700275b062c8f8d2b4.zip
u-boot-imx-81687212ee0b4fcb11f7d6700275b062c8f8d2b4.tar.gz
u-boot-imx-81687212ee0b4fcb11f7d6700275b062c8f8d2b4.tar.bz2
I2C: mxc_i2c: address failure with mx35 processor
There is sporadic failures when more as one I2C slave is on the bus and the processor tries to communicate with more as one slave. The problem was seen on a mx35pdk (two I2C slaves, PMIC controller and CAN/RTC chip). The current driver uses the IIF bit in the status register to check if the bus is busy or not. According to the manual, this is not correct, because the IIB bit should be checked. Not only, to check if a transfer is finished must be checked the ICF bit, and this is not tested at all. This patch comes from analyse with a corresponding driver provided by Freescale as part of the LTIB tool. Comparing the two drivers, it appears that the current u-boot driver checks the wrong bits, and depending on race condition, the transfer can be successful or not. The patch gets rid also of own debug function (DPRINTF), replaced with the general debug(). Tested on Freescale mx35pdk. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'drivers/misc')
0 files changed, 0 insertions, 0 deletions