dm: i2c: tegra: Convert to driver model

This converts all Tegra boards over to use driver model for I2C. The driver
is adjusted to use driver model and the following obsolete CONFIGs are
removed:

   - CONFIG_SYS_I2C_INIT_BOARD
   - CONFIG_I2C_MULTI_BUS
   - CONFIG_SYS_MAX_I2C_BUS
   - CONFIG_SYS_I2C_SPEED
   - CONFIG_SYS_I2C

This has been tested on:
- trimslice (no I2C)
- beaver
- Jetson-TK1

It has not been tested on Tegra 114 as I don't have that board.

Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 119 insertions, 247 deletions

diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c
index 562211e..87290c3 100644
--- a/drivers/i2c/tegra_i2c.c
+++ b/drivers/i2c/tegra_i2c.c
@@ -7,6 +7,8 @@
  */
 
 #include <common.h>
+#include <dm.h>
+#include <errno.h>
 #include <fdtdec.h>
 #include <i2c.h>
 #include <asm/io.h>
@@ -19,6 +21,12 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+enum i2c_type {
+	TYPE_114,
+	TYPE_STD,
+	TYPE_DVC,
+};
+
 /* Information about i2c controller */
 struct i2c_bus {
 	int			id;
@@ -27,20 +35,17 @@ struct i2c_bus {
 	int			pinmux_config;
 	struct i2c_control	*control;
 	struct i2c_ctlr		*regs;
-	int			is_dvc;	/* DVC type, rather than I2C */
-	int			is_scs;	/* single clock source (T114+) */
+	enum i2c_type		type;
 	int			inited;	/* bus is inited */
 };
 
-static struct i2c_bus i2c_controllers[TEGRA_I2C_NUM_CONTROLLERS];
-
 static void set_packet_mode(struct i2c_bus *i2c_bus)
 {
 	u32 config;
 
 	config = I2C_CNFG_NEW_MASTER_FSM_MASK | I2C_CNFG_PACKET_MODE_MASK;
 
-	if (i2c_bus->is_dvc) {
+	if (i2c_bus->type == TYPE_DVC) {
 		struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
 
 		writel(config, &dvc->cnfg);
@@ -65,6 +70,9 @@ static void i2c_reset_controller(struct i2c_bus *i2c_bus)
 
 static void i2c_init_controller(struct i2c_bus *i2c_bus)
 {
+	if (!i2c_bus->speed)
+		return;
+	debug("%s: speed=%d\n", __func__, i2c_bus->speed);
 	/*
 	 * Use PLLP - DP-04508-001_v06 datasheet indicates a divisor of 8
 	 * here, in section 23.3.1, but in fact we seem to need a factor of
@@ -73,7 +81,7 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus)
 	clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
 		i2c_bus->speed * 2 * 8);
 
-	if (i2c_bus->is_scs) {
+	if (i2c_bus->type == TYPE_114) {
 		/*
 		 * T114 I2C went to a single clock source for standard/fast and
 		 * HS clock speeds. The new clock rate setting calculation is:
@@ -98,7 +106,7 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus)
 	i2c_reset_controller(i2c_bus);
 
 	/* Configure I2C controller. */
-	if (i2c_bus->is_dvc) {	/* only for DVC I2C */
+	if (i2c_bus->type == TYPE_DVC) {	/* only for DVC I2C */
 		struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
 
 		setbits_le32(&dvc->ctrl3, DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK);
@@ -272,7 +280,7 @@ exit:
 	return error;
 }
 
-static int tegra_i2c_write_data(struct i2c_bus *bus, u32 addr, u8 *data,
+static int tegra_i2c_write_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data,
 				u32 len, bool end_with_repeated_start)
 {
 	int error;
@@ -286,14 +294,14 @@ static int tegra_i2c_write_data(struct i2c_bus *bus, u32 addr, u8 *data,
 	trans_info.num_bytes = len;
 	trans_info.is_10bit_address = 0;
 
-	error = send_recv_packets(bus, &trans_info);
+	error = send_recv_packets(i2c_bus, &trans_info);
 	if (error)
 		debug("tegra_i2c_write_data: Error (%d) !!!\n", error);
 
 	return error;
 }
 
-static int tegra_i2c_read_data(struct i2c_bus *bus, u32 addr, u8 *data,
+static int tegra_i2c_read_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data,
 			       u32 len)
 {
 	int error;
@@ -305,52 +313,32 @@ static int tegra_i2c_read_data(struct i2c_bus *bus, u32 addr, u8 *data,
 	trans_info.num_bytes = len;
 	trans_info.is_10bit_address = 0;
 
-	error = send_recv_packets(bus, &trans_info);
+	error = send_recv_packets(i2c_bus, &trans_info);
 	if (error)
 		debug("tegra_i2c_read_data: Error (%d) !!!\n", error);
 
 	return error;
 }
 
-#ifndef CONFIG_OF_CONTROL
-#error "Please enable device tree support to use this driver"
-#endif
-
-/**
- * Check that a bus number is valid and return a pointer to it
- *
- * @param bus_num	Bus number to check / return
- * @return pointer to bus, if valid, else NULL
- */
-static struct i2c_bus *tegra_i2c_get_bus(struct i2c_adapter *adap)
+static int tegra_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
 {
-	struct i2c_bus *bus;
+	struct i2c_bus *i2c_bus = dev_get_priv(dev);
 
-	bus = &i2c_controllers[adap->hwadapnr];
-	if (!bus->inited) {
-		debug("%s: Bus %u not available\n", __func__, adap->hwadapnr);
-		return NULL;
-	}
-
-	return bus;
-}
-
-static unsigned int tegra_i2c_set_bus_speed(struct i2c_adapter *adap,
-			unsigned int speed)
-{
-	struct i2c_bus *bus;
-
-	bus = tegra_i2c_get_bus(adap);
-	if (!bus)
-		return 0;
-	bus->speed = speed;
-	i2c_init_controller(bus);
+	i2c_bus->speed = speed;
+	i2c_init_controller(i2c_bus);
 
 	return 0;
 }
 
-static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
+static int tegra_i2c_probe(struct udevice *dev)
 {
+	struct i2c_bus *i2c_bus = dev_get_priv(dev);
+	const void *blob = gd->fdt_blob;
+	int node = dev->of_offset;
+	bool is_dvc;
+
+	i2c_bus->id = dev->seq;
+	i2c_bus->type = dev_get_of_data(dev);
 	i2c_bus->regs = (struct i2c_ctlr *)fdtdec_get_addr(blob, node, "reg");
 
 	/*
@@ -358,7 +346,6 @@ static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
 	 * far no one needs anything other than the default.
 	 */
 	i2c_bus->pinmux_config = FUNCMUX_DEFAULT;
-	i2c_bus->speed = fdtdec_get_int(blob, node, "clock-frequency", 0);
 	i2c_bus->periph_id = clock_decode_periph_id(blob, node);
 
 	/*
@@ -371,107 +358,25 @@ static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
 	 *		i2c_bus->pinmux_config = FUNCMUX_I2C2_PTA;
 	 */
 	if (i2c_bus->periph_id == -1)
-		return -FDT_ERR_NOTFOUND;
+		return -EINVAL;
 
-	return 0;
-}
-
-/*
- * Process a list of nodes, adding them to our list of I2C ports.
- *
- * @param blob		fdt blob
- * @param node_list	list of nodes to process (any <=0 are ignored)
- * @param count		number of nodes to process
- * @param is_dvc	1 if these are DVC ports, 0 if standard I2C
- * @param is_scs	1 if this HW uses a single clock source (T114+)
- * @return 0 if ok, -1 on error
- */
-static int process_nodes(const void *blob, int node_list[], int count,
-			 int is_dvc, int is_scs)
-{
-	struct i2c_bus *i2c_bus;
-	int i;
-
-	/* build the i2c_controllers[] for each controller */
-	for (i = 0; i < count; i++) {
-		int node = node_list[i];
-
-		if (node <= 0)
-			continue;
-
-		i2c_bus = &i2c_controllers[i];
-		i2c_bus->id = i;
-
-		if (i2c_get_config(blob, node, i2c_bus)) {
-			printf("i2c_init_board: failed to decode bus %d\n", i);
-			return -1;
-		}
-
-		i2c_bus->is_scs = is_scs;
-
-		i2c_bus->is_dvc = is_dvc;
-		if (is_dvc) {
-			i2c_bus->control =
-				&((struct dvc_ctlr *)i2c_bus->regs)->control;
-		} else {
-			i2c_bus->control = &i2c_bus->regs->control;
-		}
-		debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
-		      is_dvc ? "dvc" : "i2c", i, i2c_bus->regs,
-		      i2c_bus->periph_id, i2c_bus->speed);
-		i2c_init_controller(i2c_bus);
-		debug("ok\n");
-		i2c_bus->inited = 1;
-
-		/* Mark position as used */
-		node_list[i] = -1;
+	is_dvc = dev_get_of_data(dev) == TYPE_DVC;
+	if (is_dvc) {
+		i2c_bus->control =
+			&((struct dvc_ctlr *)i2c_bus->regs)->control;
+	} else {
+		i2c_bus->control = &i2c_bus->regs->control;
 	}
+	i2c_init_controller(i2c_bus);
+	debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
+	      is_dvc ? "dvc" : "i2c", dev->seq, i2c_bus->regs,
+	      i2c_bus->periph_id, i2c_bus->speed);
 
 	return 0;
 }
 
-/* Sadly there is no error return from this function */
-void i2c_init_board(void)
-{
-	int node_list[TEGRA_I2C_NUM_CONTROLLERS];
-	const void *blob = gd->fdt_blob;
-	int count;
-
-	/* First check for newer (T114+) I2C ports */
-	count = fdtdec_find_aliases_for_id(blob, "i2c",
-			COMPAT_NVIDIA_TEGRA114_I2C, node_list,
-			TEGRA_I2C_NUM_CONTROLLERS);
-	if (process_nodes(blob, node_list, count, 0, 1))
-		return;
-
-	/* Now get the older (T20/T30) normal I2C ports */
-	count = fdtdec_find_aliases_for_id(blob, "i2c",
-			COMPAT_NVIDIA_TEGRA20_I2C, node_list,
-			TEGRA_I2C_NUM_CONTROLLERS);
-	if (process_nodes(blob, node_list, count, 0, 0))
-		return;
-
-	/* Now look for dvc ports */
-	count = fdtdec_add_aliases_for_id(blob, "i2c",
-			COMPAT_NVIDIA_TEGRA20_DVC, node_list,
-			TEGRA_I2C_NUM_CONTROLLERS);
-	if (process_nodes(blob, node_list, count, 1, 0))
-		return;
-}
-
-static void tegra_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
-{
-	/* No i2c support prior to relocation */
-	if (!(gd->flags & GD_FLG_RELOC))
-		return;
-
-	/* This will override the speed selected in the fdt for that port */
-	debug("i2c_init(speed=%u, slaveaddr=0x%x)\n", speed, slaveaddr);
-	i2c_set_bus_speed(speed);
-}
-
 /* i2c write version without the register address */
-static int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
+static int i2c_write_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer,
 			  int len, bool end_with_repeated_start)
 {
 	int rc;
@@ -484,7 +389,7 @@ static int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
 	debug("\n");
 
 	/* Shift 7-bit address over for lower-level i2c functions */
-	rc = tegra_i2c_write_data(bus, chip << 1, buffer, len,
+	rc = tegra_i2c_write_data(i2c_bus, chip << 1, buffer, len,
 				  end_with_repeated_start);
 	if (rc)
 		debug("i2c_write_data(): rc=%d\n", rc);
@@ -493,14 +398,14 @@ static int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
 }
 
 /* i2c read version without the register address */
-static int i2c_read_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
-				int len)
+static int i2c_read_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer,
+			 int len)
 {
 	int rc;
 
 	debug("inside i2c_read_data():\n");
 	/* Shift 7-bit address over for lower-level i2c functions */
-	rc = tegra_i2c_read_data(bus, chip << 1, buffer, len);
+	rc = tegra_i2c_read_data(i2c_bus, chip << 1, buffer, len);
 	if (rc) {
 		debug("i2c_read_data(): rc=%d\n", rc);
 		return rc;
@@ -516,132 +421,99 @@ static int i2c_read_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
 }
 
 /* Probe to see if a chip is present. */
-static int tegra_i2c_probe(struct i2c_adapter *adap, uchar chip)
+static int tegra_i2c_probe_chip(struct udevice *bus, uint chip_addr,
+				uint chip_flags)
 {
-	struct i2c_bus *bus;
+	struct i2c_bus *i2c_bus = dev_get_priv(bus);
 	int rc;
-	uchar reg;
-
-	debug("i2c_probe: addr=0x%x\n", chip);
-	bus = tegra_i2c_get_bus(adap);
-	if (!bus)
-		return 1;
-	reg = 0;
-	rc = i2c_write_data(bus, chip, &reg, 1, false);
-	if (rc) {
-		debug("Error probing 0x%x.\n", chip);
-		return 1;
-	}
-	return 0;
-}
+	u8 reg;
 
-static int i2c_addr_ok(const uint addr, const int alen)
-{
-	/* We support 7 or 10 bit addresses, so one or two bytes each */
-	return alen == 1 || alen == 2;
+	/* Shift 7-bit address over for lower-level i2c functions */
+	rc = tegra_i2c_write_data(i2c_bus, chip_addr << 1, &reg, sizeof(reg),
+				  false);
+
+	return rc;
 }
 
-/* Read bytes */
-static int tegra_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
-			int alen, uchar *buffer, int len)
+static int tegra_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
+			  int nmsgs)
 {
-	struct i2c_bus *bus;
-	uint offset;
-	int i;
-
-	debug("i2c_read: chip=0x%x, addr=0x%x, alen=0x%x len=0x%x\n",
-	      chip, addr, alen, len);
-	bus = tegra_i2c_get_bus(adap);
-	if (!bus)
-		return 1;
-	if (!i2c_addr_ok(addr, alen)) {
-		debug("i2c_read: Bad address %x.%d.\n", addr, alen);
-		return 1;
-	}
-	for (offset = 0; offset < len; offset++) {
-		if (alen) {
-			uchar data[alen];
-			for (i = 0; i < alen; i++) {
-				data[alen - i - 1] =
-					(addr + offset) >> (8 * i);
-			}
-			if (i2c_write_data(bus, chip, data, alen, true)) {
-				debug("i2c_read: error sending (0x%x)\n",
-					addr);
-				return 1;
-			}
+	struct i2c_bus *i2c_bus = dev_get_priv(bus);
+	int ret;
+
+	debug("i2c_xfer: %d messages\n", nmsgs);
+	for (; nmsgs > 0; nmsgs--, msg++) {
+		bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD);
+
+		debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
+		if (msg->flags & I2C_M_RD) {
+			ret = i2c_read_data(i2c_bus, msg->addr, msg->buf,
+					    msg->len);
+		} else {
+			ret = i2c_write_data(i2c_bus, msg->addr, msg->buf,
+					     msg->len, next_is_read);
 		}
-		if (i2c_read_data(bus, chip, buffer + offset, 1)) {
-			debug("i2c_read: error reading (0x%x)\n", addr);
-			return 1;
+		if (ret) {
+			debug("i2c_write: error sending\n");
+			return -EREMOTEIO;
 		}
 	}
 
 	return 0;
 }
 
-/* Write bytes */
-static int tegra_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
-			int alen, uchar *buffer, int len)
+int tegra_i2c_get_dvc_bus(struct udevice **busp)
 {
-	struct i2c_bus *bus;
-	uint offset;
-	int i;
-
-	debug("i2c_write: chip=0x%x, addr=0x%x, alen=0x%x len=0x%x\n",
-	      chip, addr, alen, len);
-	bus = tegra_i2c_get_bus(adap);
-	if (!bus)
-		return 1;
-	if (!i2c_addr_ok(addr, alen)) {
-		debug("i2c_write: Bad address %x.%d.\n", addr, alen);
-		return 1;
-	}
-	for (offset = 0; offset < len; offset++) {
-		uchar data[alen + 1];
-		for (i = 0; i < alen; i++)
-			data[alen - i - 1] = (addr + offset) >> (8 * i);
-		data[alen] = buffer[offset];
-		if (i2c_write_data(bus, chip, data, alen + 1, false)) {
-			debug("i2c_write: error sending (0x%x)\n", addr);
-			return 1;
+	struct udevice *bus;
+
+	for (uclass_first_device(UCLASS_I2C, &bus);
+	     bus;
+	     uclass_next_device(&bus)) {
+		if (dev_get_of_data(bus) == TYPE_DVC) {
+			*busp = bus;
+			return 0;
 		}
 	}
 
-	return 0;
+	return -ENODEV;
 }
 
-int tegra_i2c_get_dvc_bus_num(void)
-{
-	int i;
+static const struct dm_i2c_ops tegra_i2c_ops = {
+	.xfer		= tegra_i2c_xfer,
+	.probe_chip	= tegra_i2c_probe_chip,
+	.set_bus_speed	= tegra_i2c_set_bus_speed,
+};
 
-	for (i = 0; i < TEGRA_I2C_NUM_CONTROLLERS; i++) {
-		struct i2c_bus *bus = &i2c_controllers[i];
+static int tegra_i2c_child_pre_probe(struct udevice *dev)
+{
+	struct dm_i2c_chip *i2c_chip = dev_get_parentdata(dev);
 
-		if (bus->inited && bus->is_dvc)
-			return i;
-	}
+	if (dev->of_offset == -1)
+		return 0;
+	return i2c_chip_ofdata_to_platdata(gd->fdt_blob, dev->of_offset,
+					   i2c_chip);
+}
 
-	return -1;
+static int tegra_i2c_ofdata_to_platdata(struct udevice *dev)
+{
+	return 0;
 }
 
-/*
- * Register soft i2c adapters
- */
-U_BOOT_I2C_ADAP_COMPLETE(tegra0, tegra_i2c_init, tegra_i2c_probe,
-			 tegra_i2c_read, tegra_i2c_write,
-			 tegra_i2c_set_bus_speed, 100000, 0, 0)
-U_BOOT_I2C_ADAP_COMPLETE(tegra1, tegra_i2c_init, tegra_i2c_probe,
-			 tegra_i2c_read, tegra_i2c_write,
-			 tegra_i2c_set_bus_speed, 100000, 0, 1)
-U_BOOT_I2C_ADAP_COMPLETE(tegra2, tegra_i2c_init, tegra_i2c_probe,
-			 tegra_i2c_read, tegra_i2c_write,
-			 tegra_i2c_set_bus_speed, 100000, 0, 2)
-U_BOOT_I2C_ADAP_COMPLETE(tegra3, tegra_i2c_init, tegra_i2c_probe,
-			 tegra_i2c_read, tegra_i2c_write,
-			 tegra_i2c_set_bus_speed, 100000, 0, 3)
-#if TEGRA_I2C_NUM_CONTROLLERS > 4
-U_BOOT_I2C_ADAP_COMPLETE(tegra4, tegra_i2c_init, tegra_i2c_probe,
-			 tegra_i2c_read, tegra_i2c_write,
-			 tegra_i2c_set_bus_speed, 100000, 0, 4)
-#endif
+static const struct udevice_id tegra_i2c_ids[] = {
+	{ .compatible = "nvidia,tegra114-i2c", .data = TYPE_114 },
+	{ .compatible = "nvidia,tegra20-i2c", .data = TYPE_STD },
+	{ .compatible = "nvidia,tegra20-i2c-dvc", .data = TYPE_DVC },
+	{ }
+};
+
+U_BOOT_DRIVER(i2c_tegra) = {
+	.name	= "i2c_tegra",
+	.id	= UCLASS_I2C,
+	.of_match = tegra_i2c_ids,
+	.ofdata_to_platdata = tegra_i2c_ofdata_to_platdata,
+	.probe	= tegra_i2c_probe,
+	.per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
+	.child_pre_probe = tegra_i2c_child_pre_probe,
+	.priv_auto_alloc_size = sizeof(struct i2c_bus),
+	.ops	= &tegra_i2c_ops,
+};