summaryrefslogtreecommitdiff
path: root/drivers/i2c/ppc4xx_i2c.c
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2013-07-24 09:22:28 -0400
committerTom Rini <trini@ti.com>2013-07-24 09:50:24 -0400
commitc2120fbfbc4d1f6953228f86be8bdbf38bacfdab (patch)
tree14cd8ec9a0a61f7113149be38d79808cd5e955f8 /drivers/i2c/ppc4xx_i2c.c
parente85427fd66a21b39145a47e67871a8863c0e5591 (diff)
parentecbd7e1ec7280d90d151a99691f74b892588cadd (diff)
downloadu-boot-imx-c2120fbfbc4d1f6953228f86be8bdbf38bacfdab.zip
u-boot-imx-c2120fbfbc4d1f6953228f86be8bdbf38bacfdab.tar.gz
u-boot-imx-c2120fbfbc4d1f6953228f86be8bdbf38bacfdab.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-i2c
The sandburst-specific i2c drivers have been deleted, conflict was just over the SPDX conversion. Conflicts: board/sandburst/common/ppc440gx_i2c.c board/sandburst/common/ppc440gx_i2c.h Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'drivers/i2c/ppc4xx_i2c.c')
-rw-r--r--drivers/i2c/ppc4xx_i2c.c193
1 files changed, 96 insertions, 97 deletions
diff --git a/drivers/i2c/ppc4xx_i2c.c b/drivers/i2c/ppc4xx_i2c.c
index 52929eb..e7a15ba 100644
--- a/drivers/i2c/ppc4xx_i2c.c
+++ b/drivers/i2c/ppc4xx_i2c.c
@@ -16,27 +16,29 @@
#include <i2c.h>
#include <asm/io.h>
-#ifdef CONFIG_HARD_I2C
-
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_I2C_MULTI_BUS)
-/*
- * Initialize the bus pointer to whatever one the SPD EEPROM is on.
- * Default is bus 0. This is necessary because the DDR initialization
- * runs from ROM, and we can't switch buses because we can't modify
- * the global variables.
- */
-#ifndef CONFIG_SYS_SPD_BUS_NUM
-#define CONFIG_SYS_SPD_BUS_NUM 0
+static inline struct ppc4xx_i2c *ppc4xx_get_i2c(int hwadapnr)
+{
+ unsigned long base;
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ base = CONFIG_SYS_PERIPHERAL_BASE + 0x00000700 + (hwadapnr * 0x100);
+#elif defined(CONFIG_440) || defined(CONFIG_405EX)
+/* all remaining 440 variants */
+ base = CONFIG_SYS_PERIPHERAL_BASE + 0x00000400 + (hwadapnr * 0x100);
+#else
+/* all 405 variants */
+ base = 0xEF600500 + (hwadapnr * 0x100);
#endif
-static unsigned int i2c_bus_num __attribute__ ((section (".data"))) =
- CONFIG_SYS_SPD_BUS_NUM;
-#endif /* CONFIG_I2C_MULTI_BUS */
+ return (struct ppc4xx_i2c *)base;
+}
-static void _i2c_bus_reset(void)
+static void _i2c_bus_reset(struct i2c_adapter *adap)
{
- struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR;
+ struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr);
int i;
u8 dc;
@@ -75,11 +77,10 @@ static void _i2c_bus_reset(void)
out_8(&i2c->xtcntlss, 0);
}
-void i2c_init(int speed, int slaveaddr)
+static void ppc4xx_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
{
- struct ppc4xx_i2c *i2c;
+ struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr);
int val, divisor;
- int bus;
#ifdef CONFIG_SYS_I2C_INIT_BOARD
/*
@@ -90,67 +91,57 @@ void i2c_init(int speed, int slaveaddr)
i2c_init_board();
#endif
- for (bus = 0; bus < CONFIG_SYS_MAX_I2C_BUS; bus++) {
- I2C_SET_BUS(bus);
-
- /* Set i2c pointer after calling I2C_SET_BUS() */
- i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR;
-
- /* Handle possible failed I2C state */
- /* FIXME: put this into i2c_init_board()? */
- _i2c_bus_reset();
+ /* Handle possible failed I2C state */
+ /* FIXME: put this into i2c_init_board()? */
+ _i2c_bus_reset(adap);
- /* clear lo master address */
- out_8(&i2c->lmadr, 0);
+ /* clear lo master address */
+ out_8(&i2c->lmadr, 0);
- /* clear hi master address */
- out_8(&i2c->hmadr, 0);
-
- /* clear lo slave address */
- out_8(&i2c->lsadr, 0);
+ /* clear hi master address */
+ out_8(&i2c->hmadr, 0);
- /* clear hi slave address */
- out_8(&i2c->hsadr, 0);
+ /* clear lo slave address */
+ out_8(&i2c->lsadr, 0);
- /* Clock divide Register */
- /* set divisor according to freq_opb */
- divisor = (get_OPB_freq() - 1) / 10000000;
- if (divisor == 0)
- divisor = 1;
- out_8(&i2c->clkdiv, divisor);
+ /* clear hi slave address */
+ out_8(&i2c->hsadr, 0);
- /* no interrupts */
- out_8(&i2c->intrmsk, 0);
+ /* Clock divide Register */
+ /* set divisor according to freq_opb */
+ divisor = (get_OPB_freq() - 1) / 10000000;
+ if (divisor == 0)
+ divisor = 1;
+ out_8(&i2c->clkdiv, divisor);
- /* clear transfer count */
- out_8(&i2c->xfrcnt, 0);
+ /* no interrupts */
+ out_8(&i2c->intrmsk, 0);
- /* clear extended control & stat */
- /* write 1 in SRC SRS SWC SWS to clear these fields */
- out_8(&i2c->xtcntlss, 0xF0);
+ /* clear transfer count */
+ out_8(&i2c->xfrcnt, 0);
- /* Mode Control Register
- Flush Slave/Master data buffer */
- out_8(&i2c->mdcntl, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
+ /* clear extended control & stat */
+ /* write 1 in SRC SRS SWC SWS to clear these fields */
+ out_8(&i2c->xtcntlss, 0xF0);
- val = in_8(&i2c->mdcntl);
+ /* Mode Control Register
+ Flush Slave/Master data buffer */
+ out_8(&i2c->mdcntl, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
- /* Ignore General Call, slave transfers are ignored,
- * disable interrupts, exit unknown bus state, enable hold
- * SCL 100kHz normaly or FastMode for 400kHz and above
- */
+ val = in_8(&i2c->mdcntl);
- val |= IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL;
- if (speed >= 400000)
- val |= IIC_MDCNTL_FSM;
- out_8(&i2c->mdcntl, val);
+ /* Ignore General Call, slave transfers are ignored,
+ * disable interrupts, exit unknown bus state, enable hold
+ * SCL 100kHz normaly or FastMode for 400kHz and above
+ */
- /* clear control reg */
- out_8(&i2c->cntl, 0x00);
- }
+ val |= IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL;
+ if (speed >= 400000)
+ val |= IIC_MDCNTL_FSM;
+ out_8(&i2c->mdcntl, val);
- /* set to SPD bus as default bus upon powerup */
- I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
+ /* clear control reg */
+ out_8(&i2c->cntl, 0x00);
}
/*
@@ -178,14 +169,15 @@ void i2c_init(int speed, int slaveaddr)
*
* It does not check XFRCNT.
*/
-static int i2c_transfer(unsigned char cmd_type,
+static int _i2c_transfer(struct i2c_adapter *adap,
+ unsigned char cmd_type,
unsigned char chip,
unsigned char addr[],
unsigned char addr_len,
unsigned char data[],
unsigned short data_len)
{
- struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR;
+ struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr);
u8 *ptr;
int reading;
int tran, cnt;
@@ -329,7 +321,7 @@ static int i2c_transfer(unsigned char cmd_type,
return result;
}
-int i2c_probe(uchar chip)
+static int ppc4xx_i2c_probe(struct i2c_adapter *adap, uchar chip)
{
uchar buf[1];
@@ -340,11 +332,11 @@ int i2c_probe(uchar chip)
* address was <ACK>ed (i.e. there was a chip at that address which
* drove the data line low).
*/
- return (i2c_transfer(1, chip << 1, 0, 0, buf, 1) != 0);
+ return (_i2c_transfer(adap, 1, chip << 1, 0, 0, buf, 1) != 0);
}
-static int ppc4xx_i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer,
- int len, int read)
+static int ppc4xx_i2c_transfer(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *buffer, int len, int read)
{
uchar xaddr[4];
int ret;
@@ -378,43 +370,50 @@ static int ppc4xx_i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer,
chip |= ((addr >> (alen * 8)) &
CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
#endif
- if ((ret = i2c_transfer(read, chip << 1, &xaddr[4 - alen], alen,
- buffer, len)) != 0) {
+ ret = _i2c_transfer(adap, read, chip << 1, &xaddr[4 - alen], alen,
+ buffer, len);
+ if (ret) {
printf("I2C %s: failed %d\n", read ? "read" : "write", ret);
-
return 1;
}
return 0;
}
-int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
+static int ppc4xx_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *buffer, int len)
{
- return ppc4xx_i2c_transfer(chip, addr, alen, buffer, len, 1);
+ return ppc4xx_i2c_transfer(adap, chip, addr, alen, buffer, len, 1);
}
-int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
+static int ppc4xx_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *buffer, int len)
{
- return ppc4xx_i2c_transfer(chip, addr, alen, buffer, len, 0);
+ return ppc4xx_i2c_transfer(adap, chip, addr, alen, buffer, len, 0);
}
-#if defined(CONFIG_I2C_MULTI_BUS)
-/*
- * Functions for multiple I2C bus handling
- */
-unsigned int i2c_get_bus_num(void)
+static unsigned int ppc4xx_i2c_set_bus_speed(struct i2c_adapter *adap,
+ unsigned int speed)
{
- return i2c_bus_num;
-}
-
-int i2c_set_bus_num(unsigned int bus)
-{
- if (bus >= CONFIG_SYS_MAX_I2C_BUS)
+ if (speed != adap->speed)
return -1;
-
- i2c_bus_num = bus;
-
- return 0;
+ return speed;
}
-#endif /* CONFIG_I2C_MULTI_BUS */
-#endif /* CONFIG_HARD_I2C */
+
+/*
+ * Register ppc4xx i2c adapters
+ */
+#ifdef CONFIG_SYS_I2C_PPC4XX_CH0
+U_BOOT_I2C_ADAP_COMPLETE(ppc4xx_0, ppc4xx_i2c_init, ppc4xx_i2c_probe,
+ ppc4xx_i2c_read, ppc4xx_i2c_write,
+ ppc4xx_i2c_set_bus_speed,
+ CONFIG_SYS_I2C_PPC4XX_SPEED_0,
+ CONFIG_SYS_I2C_PPC4XX_SLAVE_0, 0)
+#endif
+#ifdef CONFIG_SYS_I2C_PPC4XX_CH1
+U_BOOT_I2C_ADAP_COMPLETE(ppc4xx_1, ppc4xx_i2c_init, ppc4xx_i2c_probe,
+ ppc4xx_i2c_read, ppc4xx_i2c_write,
+ ppc4xx_i2c_set_bus_speed,
+ CONFIG_SYS_I2C_PPC4XX_SPEED_1,
+ CONFIG_SYS_I2C_PPC4XX_SLAVE_1, 1)
+#endif