summaryrefslogtreecommitdiff
path: root/drivers/i2c/fti2c010.h
diff options
context:
space:
mode:
authorKuo-Jung Su <dantesu@faraday-tech.com>2013-05-08 15:36:26 +0800
committerHeiko Schocher <hs@denx.de>2013-07-23 08:34:58 +0200
commit3cff842bca8aa78fc49436711873466db9be21f8 (patch)
treefd6f4bf8ee61de718c88f11c4d9814ab47452ec3 /drivers/i2c/fti2c010.h
parent30ea41a489cbfed311f904bd08cb3319f0e73b72 (diff)
downloadu-boot-imx-3cff842bca8aa78fc49436711873466db9be21f8.zip
u-boot-imx-3cff842bca8aa78fc49436711873466db9be21f8.tar.gz
u-boot-imx-3cff842bca8aa78fc49436711873466db9be21f8.tar.bz2
i2c: add Faraday FTI2C010 I2C controller support
Faraday FTI2C010 is a multi-function I2C controller which supports both master and slave mode. This patch simplily implements the master mode only. Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> CC: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'drivers/i2c/fti2c010.h')
-rw-r--r--drivers/i2c/fti2c010.h81
1 files changed, 81 insertions, 0 deletions
diff --git a/drivers/i2c/fti2c010.h b/drivers/i2c/fti2c010.h
new file mode 100644
index 0000000..18aec2c
--- /dev/null
+++ b/drivers/i2c/fti2c010.h
@@ -0,0 +1,81 @@
+/*
+ * Faraday I2C Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef __FTI2C010_H
+#define __FTI2C010_H
+
+/*
+ * FTI2C010 registers
+ */
+struct fti2c010_regs {
+ uint32_t cr; /* 0x00: control register */
+ uint32_t sr; /* 0x04: status register */
+ uint32_t cdr; /* 0x08: clock division register */
+ uint32_t dr; /* 0x0c: data register */
+ uint32_t sar; /* 0x10: slave address register */
+ uint32_t tgsr;/* 0x14: time & glitch suppression register */
+ uint32_t bmr; /* 0x18: bus monitor register */
+ uint32_t rsvd[5];
+ uint32_t revr;/* 0x30: revision register */
+};
+
+/*
+ * control register
+ */
+#define CR_ALIRQ 0x2000 /* arbitration lost interrupt (master) */
+#define CR_SAMIRQ 0x1000 /* slave address match interrupt (slave) */
+#define CR_STOPIRQ 0x800 /* stop condition interrupt (slave) */
+#define CR_NAKRIRQ 0x400 /* NACK response interrupt (master) */
+#define CR_DRIRQ 0x200 /* rx interrupt (both) */
+#define CR_DTIRQ 0x100 /* tx interrupt (both) */
+#define CR_TBEN 0x80 /* tx enable (both) */
+#define CR_NAK 0x40 /* NACK (both) */
+#define CR_STOP 0x20 /* stop (master) */
+#define CR_START 0x10 /* start (master) */
+#define CR_GCEN 0x8 /* general call support (slave) */
+#define CR_SCLEN 0x4 /* enable clock out (master) */
+#define CR_I2CEN 0x2 /* enable I2C (both) */
+#define CR_I2CRST 0x1 /* reset I2C (both) */
+#define CR_ENABLE \
+ (CR_ALIRQ | CR_NAKRIRQ | CR_DRIRQ | CR_DTIRQ | CR_SCLEN | CR_I2CEN)
+
+/*
+ * status register
+ */
+#define SR_CLRAL 0x400 /* clear arbitration lost */
+#define SR_CLRGC 0x200 /* clear general call */
+#define SR_CLRSAM 0x100 /* clear slave address match */
+#define SR_CLRSTOP 0x80 /* clear stop */
+#define SR_CLRNAKR 0x40 /* clear NACK respond */
+#define SR_DR 0x20 /* rx ready */
+#define SR_DT 0x10 /* tx done */
+#define SR_BB 0x8 /* bus busy */
+#define SR_BUSY 0x4 /* chip busy */
+#define SR_ACK 0x2 /* ACK/NACK received */
+#define SR_RW 0x1 /* set when master-rx or slave-tx mode */
+
+/*
+ * clock division register
+ */
+#define CDR_DIV(n) ((n) & 0x3ffff)
+
+/*
+ * time & glitch suppression register
+ */
+#define TGSR_GSR(n) (((n) & 0x7) << 10)
+#define TGSR_TSR(n) ((n) & 0x3ff)
+
+/*
+ * bus monitor register
+ */
+#define BMR_SCL 0x2 /* SCL is pull-up */
+#define BMR_SDA 0x1 /* SDA is pull-up */
+
+#endif /* __FTI2C010_H */