Merge git://www.denx.de/git/u-boot

Conflicts:

	drivers/Makefile

1 files changed, 295 insertions, 0 deletions

diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
new file mode 100644
index 0000000..22485ea
--- /dev/null
+++ b/drivers/i2c/fsl_i2c.c
@@ -0,0 +1,295 @@
+/*
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_HARD_I2C
+
+#include <command.h>
+#include <i2c.h>		/* Functional interface */
+
+#include <asm/io.h>
+#include <asm/fsl_i2c.h>	/* HW definitions */
+
+#define I2C_TIMEOUT	(CFG_HZ / 4)
+
+#define I2C_READ_BIT  1
+#define I2C_WRITE_BIT 0
+
+/* Initialize the bus pointer to whatever one the SPD EEPROM is on.
+ * Default is bus 0.  This is necessary because the DDR initialization
+ * runs from ROM, and we can't switch buses because we can't modify
+ * the global variables.
+ */
+#ifdef CFG_SPD_BUS_NUM
+static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS_NUM;
+#else
+static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
+#endif
+
+static volatile struct fsl_i2c *i2c_dev[2] = {
+	(struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET),
+#ifdef CFG_I2C2_OFFSET
+	(struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET)
+#endif
+};
+
+void
+i2c_init(int speed, int slaveadd)
+{
+	volatile struct fsl_i2c *dev;
+
+	dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET);
+
+	writeb(0, &dev->cr);			/* stop I2C controller */
+	udelay(5);				/* let it shutdown in peace */
+	writeb(0x3F, &dev->fdr);		/* set bus speed */
+	writeb(0x3F, &dev->dfsrr);		/* set default filter */
+	writeb(slaveadd << 1, &dev->adr);	/* write slave address */
+	writeb(0x0, &dev->sr);			/* clear status register */
+	writeb(I2C_CR_MEN, &dev->cr);		/* start I2C controller */
+
+#ifdef	CFG_I2C2_OFFSET
+	dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET);
+
+	writeb(0, &dev->cr);			/* stop I2C controller */
+	udelay(5);				/* let it shutdown in peace */
+	writeb(0x3F, &dev->fdr);		/* set bus speed */
+	writeb(0x3F, &dev->dfsrr);		/* set default filter */
+	writeb(slaveadd << 1, &dev->adr);	/* write slave address */
+	writeb(0x0, &dev->sr);			/* clear status register */
+	writeb(I2C_CR_MEN, &dev->cr);		/* start I2C controller */
+#endif	/* CFG_I2C2_OFFSET */
+}
+
+static __inline__ int
+i2c_wait4bus(void)
+{
+	ulong timeval = get_timer(0);
+
+	while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) {
+		if (get_timer(timeval) > I2C_TIMEOUT) {
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static __inline__ int
+i2c_wait(int write)
+{
+	u32 csr;
+	ulong timeval = get_timer(0);
+
+	do {
+		csr = readb(&i2c_dev[i2c_bus_num]->sr);
+		if (!(csr & I2C_SR_MIF))
+			continue;
+
+		writeb(0x0, &i2c_dev[i2c_bus_num]->sr);
+
+		if (csr & I2C_SR_MAL) {
+			debug("i2c_wait: MAL\n");
+			return -1;
+		}
+
+		if (!(csr & I2C_SR_MCF))	{
+			debug("i2c_wait: unfinished\n");
+			return -1;
+		}
+
+		if (write == I2C_WRITE_BIT && (csr & I2C_SR_RXAK)) {
+			debug("i2c_wait: No RXACK\n");
+			return -1;
+		}
+
+		return 0;
+	} while (get_timer (timeval) < I2C_TIMEOUT);
+
+	debug("i2c_wait: timed out\n");
+	return -1;
+}
+
+static __inline__ int
+i2c_write_addr (u8 dev, u8 dir, int rsta)
+{
+	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX
+	       | (rsta ? I2C_CR_RSTA : 0),
+	       &i2c_dev[i2c_bus_num]->cr);
+
+	writeb((dev << 1) | dir, &i2c_dev[i2c_bus_num]->dr);
+
+	if (i2c_wait(I2C_WRITE_BIT) < 0)
+		return 0;
+
+	return 1;
+}
+
+static __inline__ int
+__i2c_write(u8 *data, int length)
+{
+	int i;
+
+	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
+	       &i2c_dev[i2c_bus_num]->cr);
+
+	for (i = 0; i < length; i++) {
+		writeb(data[i], &i2c_dev[i2c_bus_num]->dr);
+
+		if (i2c_wait(I2C_WRITE_BIT) < 0)
+			break;
+	}
+
+	return i;
+}
+
+static __inline__ int
+__i2c_read(u8 *data, int length)
+{
+	int i;
+
+	writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0),
+	       &i2c_dev[i2c_bus_num]->cr);
+
+	/* dummy read */
+	readb(&i2c_dev[i2c_bus_num]->dr);
+
+	for (i = 0; i < length; i++) {
+		if (i2c_wait(I2C_READ_BIT) < 0)
+			break;
+
+		/* Generate ack on last next to last byte */
+		if (i == length - 2)
+			writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK,
+			       &i2c_dev[i2c_bus_num]->cr);
+
+		/* Generate stop on last byte */
+		if (i == length - 1)
+			writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr);
+
+		data[i] = readb(&i2c_dev[i2c_bus_num]->dr);
+	}
+
+	return i;
+}
+
+int
+i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+	int i = -1; /* signal error */
+	u8 *a = (u8*)&addr;
+
+	if (i2c_wait4bus() >= 0
+	    && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
+	    && __i2c_write(&a[4 - alen], alen) == alen)
+		i = 0; /* No error so far */
+
+	if (length
+	    && i2c_write_addr(dev, I2C_READ_BIT, 1) != 0)
+		i = __i2c_read(data, length);
+
+	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+
+	if (i == length)
+	    return 0;
+
+	return -1;
+}
+
+int
+i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+	int i = -1; /* signal error */
+	u8 *a = (u8*)&addr;
+
+	if (i2c_wait4bus() >= 0
+	    && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
+	    && __i2c_write(&a[4 - alen], alen) == alen) {
+		i = __i2c_write(data, length);
+	}
+
+	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+
+	if (i == length)
+	    return 0;
+
+	return -1;
+}
+
+int
+i2c_probe(uchar chip)
+{
+	/* For unknow reason the controller will ACK when
+	 * probing for a slave with the same address, so skip
+	 * it.
+	 */
+	if (chip == (readb(&i2c_dev[i2c_bus_num]->adr) >> 1))
+		return -1;
+
+	return i2c_read(chip, 0, 0, NULL, 0);
+}
+
+uchar
+i2c_reg_read(uchar i2c_addr, uchar reg)
+{
+	uchar buf[1];
+
+	i2c_read(i2c_addr, reg, 1, buf, 1);
+
+	return buf[0];
+}
+
+void
+i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
+{
+	i2c_write(i2c_addr, reg, 1, &val, 1);
+}
+
+int i2c_set_bus_num(unsigned int bus)
+{
+#ifdef CFG_I2C2_OFFSET
+	if (bus > 1) {
+#else
+	if (bus > 0) {
+#endif
+		return -1;
+	}
+
+	i2c_bus_num = bus;
+
+	return 0;
+}
+
+int i2c_set_bus_speed(unsigned int speed)
+{
+	return -1;
+}
+
+unsigned int i2c_get_bus_num(void)
+{
+	return i2c_bus_num;
+}
+
+unsigned int i2c_get_bus_speed(void)
+{
+	return 0;
+}
+#endif /* CONFIG_HARD_I2C */
+#endif /* CONFIG_FSL_I2C */