fpga: Remove relocation fixups

PPC boards are the only users of the current FPGA code which is littered
with manual relocation fixups.  Now that proper relocation is supported
for PPC boards, remove FPGA manual relocation.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 0 insertions, 91 deletions

diff --git a/drivers/fpga/cyclon2.c b/drivers/fpga/cyclon2.c
index 3ed64b2..4622b4e 100644
--- a/drivers/fpga/cyclon2.c
+++ b/drivers/fpga/cyclon2.c
@@ -50,7 +50,6 @@
 static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize );
 static int CYC2_ps_dump( Altera_desc *desc, void *buf, size_t bsize );
 /* static int CYC2_ps_info( Altera_desc *desc ); */
-static int CYC2_ps_reloc( Altera_desc *desc, ulong reloc_offset );
 
 /* ------------------------------------------------------------------------- */
 /* CYCLON2 Generic Implementation */
@@ -99,30 +98,6 @@ int CYC2_info( Altera_desc *desc )
 	return FPGA_SUCCESS;
 }
 
-int CYC2_reloc (Altera_desc * desc, ulong reloc_offset)
-{
-	int ret_val = FPGA_FAIL;	/* assume a failure */
-
-	if (desc->family != Altera_CYC2) {
-		printf ("%s: Unsupported family type, %d\n",
-				__FUNCTION__, desc->family);
-		return FPGA_FAIL;
-	} else
-		switch (desc->iface) {
-		case passive_serial:
-			ret_val = CYC2_ps_reloc (desc, reloc_offset);
-			break;
-
-		/* Add new interface types here */
-
-		default:
-			printf ("%s: Unsupported interface type, %d\n",
-					__FUNCTION__, desc->iface);
-		}
-
-	return ret_val;
-}
-
 /* ------------------------------------------------------------------------- */
 /* CYCLON2 Passive Serial Generic Implementation                                  */
 static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize)
@@ -233,69 +208,3 @@ static int CYC2_ps_dump (Altera_desc * desc, void *buf, size_t bsize)
 			__FUNCTION__);
 	return FPGA_FAIL;
 }
-
-static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset)
-{
-	int ret_val = FPGA_FAIL;	/* assume the worst */
-	Altera_CYC2_Passive_Serial_fns *fn_r, *fn =
-			(Altera_CYC2_Passive_Serial_fns *) (desc->iface_fns);
-
-	if (fn) {
-		ulong addr;
-
-		/* Get the relocated table address */
-		addr = (ulong) fn + reloc_offset;
-		fn_r = (Altera_CYC2_Passive_Serial_fns *) addr;
-
-		if (!fn_r->relocated) {
-
-			if (memcmp (fn_r, fn,
-						sizeof (Altera_CYC2_Passive_Serial_fns))
-				== 0) {
-				/* good copy of the table, fix the descriptor pointer */
-				desc->iface_fns = fn_r;
-			} else {
-				PRINTF ("%s: Invalid function table at 0x%p\n",
-						__FUNCTION__, fn_r);
-				return FPGA_FAIL;
-			}
-
-			PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__,
-					desc);
-
-			addr = (ulong) (fn->pre) + reloc_offset;
-			fn_r->pre = (Altera_pre_fn) addr;
-
-			addr = (ulong) (fn->config) + reloc_offset;
-			fn_r->config = (Altera_config_fn) addr;
-
-			addr = (ulong) (fn->status) + reloc_offset;
-			fn_r->status = (Altera_status_fn) addr;
-
-			addr = (ulong) (fn->done) + reloc_offset;
-			fn_r->done = (Altera_done_fn) addr;
-
-			addr = (ulong) (fn->write) + reloc_offset;
-			fn_r->write = (Altera_write_fn) addr;
-
-			addr = (ulong) (fn->abort) + reloc_offset;
-			fn_r->abort = (Altera_abort_fn) addr;
-
-			addr = (ulong) (fn->post) + reloc_offset;
-			fn_r->post = (Altera_post_fn) addr;
-
-			fn_r->relocated = TRUE;
-
-		} else {
-			/* this table has already been moved */
-			/* XXX - should check to see if the descriptor is correct */
-			desc->iface_fns = fn_r;
-		}
-
-		ret_val = FPGA_SUCCESS;
-	} else {
-		printf ("%s: NULL Interface function table!\n", __FUNCTION__);
-	}
-
-	return ret_val;
-}