fpga: Remove relocation fixups

PPC boards are the only users of the current FPGA code which is littered
with manual relocation fixups.  Now that proper relocation is supported
for PPC boards, remove FPGA manual relocation.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 0 insertions, 96 deletions

diff --git a/drivers/fpga/ACEX1K.c b/drivers/fpga/ACEX1K.c
index 3f79677..06b4247 100644
--- a/drivers/fpga/ACEX1K.c
+++ b/drivers/fpga/ACEX1K.c
@@ -51,7 +51,6 @@
 static int ACEX1K_ps_load( Altera_desc *desc, void *buf, size_t bsize );
 static int ACEX1K_ps_dump( Altera_desc *desc, void *buf, size_t bsize );
 /* static int ACEX1K_ps_info( Altera_desc *desc ); */
-static int ACEX1K_ps_reloc( Altera_desc *desc, ulong reloc_offset );
 
 /* ------------------------------------------------------------------------- */
 /* ACEX1K Generic Implementation */
@@ -101,31 +100,6 @@ int ACEX1K_info( Altera_desc *desc )
 }
 
 
-int ACEX1K_reloc (Altera_desc * desc, ulong reloc_offset)
-{
-	int ret_val = FPGA_FAIL;	/* assume a failure */
-
-	if (desc->family != Altera_ACEX1K) {
-		printf ("%s: Unsupported family type, %d\n",
-				__FUNCTION__, desc->family);
-		return FPGA_FAIL;
-	} else
-		switch (desc->iface) {
-		case passive_serial:
-			ret_val = ACEX1K_ps_reloc (desc, reloc_offset);
-			break;
-
-		/* Add new interface types here */
-
-		default:
-			printf ("%s: Unsupported interface type, %d\n",
-					__FUNCTION__, desc->iface);
-		}
-
-	return ret_val;
-}
-
-
 /* ------------------------------------------------------------------------- */
 /* ACEX1K Passive Serial Generic Implementation                                  */
 
@@ -290,73 +264,3 @@ static int ACEX1K_ps_dump (Altera_desc * desc, void *buf, size_t bsize)
 			__FUNCTION__);
 	return FPGA_FAIL;
 }
-
-static int ACEX1K_ps_reloc (Altera_desc * desc, ulong reloc_offset)
-{
-	int ret_val = FPGA_FAIL;	/* assume the worst */
-	Altera_ACEX1K_Passive_Serial_fns *fn_r, *fn =
-			(Altera_ACEX1K_Passive_Serial_fns *) (desc->iface_fns);
-
-	if (fn) {
-		ulong addr;
-
-		/* Get the relocated table address */
-		addr = (ulong) fn + reloc_offset;
-		fn_r = (Altera_ACEX1K_Passive_Serial_fns *) addr;
-
-		if (!fn_r->relocated) {
-
-			if (memcmp (fn_r, fn,
-						sizeof (Altera_ACEX1K_Passive_Serial_fns))
-				== 0) {
-				/* good copy of the table, fix the descriptor pointer */
-				desc->iface_fns = fn_r;
-			} else {
-				PRINTF ("%s: Invalid function table at 0x%p\n",
-						__FUNCTION__, fn_r);
-				return FPGA_FAIL;
-			}
-
-			PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__,
-					desc);
-
-			addr = (ulong) (fn->pre) + reloc_offset;
-			fn_r->pre = (Altera_pre_fn) addr;
-
-			addr = (ulong) (fn->config) + reloc_offset;
-			fn_r->config = (Altera_config_fn) addr;
-
-			addr = (ulong) (fn->status) + reloc_offset;
-			fn_r->status = (Altera_status_fn) addr;
-
-			addr = (ulong) (fn->done) + reloc_offset;
-			fn_r->done = (Altera_done_fn) addr;
-
-			addr = (ulong) (fn->clk) + reloc_offset;
-			fn_r->clk = (Altera_clk_fn) addr;
-
-			addr = (ulong) (fn->data) + reloc_offset;
-			fn_r->data = (Altera_data_fn) addr;
-
-			addr = (ulong) (fn->abort) + reloc_offset;
-			fn_r->abort = (Altera_abort_fn) addr;
-
-			addr = (ulong) (fn->post) + reloc_offset;
-			fn_r->post = (Altera_post_fn) addr;
-
-			fn_r->relocated = TRUE;
-
-		} else {
-			/* this table has already been moved */
-			/* XXX - should check to see if the descriptor is correct */
-			desc->iface_fns = fn_r;
-		}
-
-		ret_val = FPGA_SUCCESS;
-	} else {
-		printf ("%s: NULL Interface function table!\n", __FUNCTION__);
-	}
-
-	return ret_val;
-
-}