* Code cleanup:

  - remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)

1 files changed, 38 insertions, 38 deletions

diff --git a/drivers/e1000.h b/drivers/e1000.h
index ba05ac0..0fbdc90 100644
--- a/drivers/e1000.h
+++ b/drivers/e1000.h
@@ -1,25 +1,25 @@
 /*******************************************************************************
 
-  
+
   Copyright(c) 1999 - 2002 Intel Corporation. All rights reserved.
-  
-  This program is free software; you can redistribute it and/or modify it 
-  under the terms of the GNU General Public License as published by the Free 
-  Software Foundation; either version 2 of the License, or (at your option) 
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms of the GNU General Public License as published by the Free
+  Software Foundation; either version 2 of the License, or (at your option)
   any later version.
-  
-  This program is distributed in the hope that it will be useful, but WITHOUT 
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 
+
+  This program is distributed in the hope that it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
   more details.
-  
+
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc., 59 
+  this program; if not, write to the Free Software Foundation, Inc., 59
   Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-  
+
   The full GNU General Public License is included in this distribution in the
   file called LICENSE.
-  
+
   Contact Information:
   Linux NICS <linux.nics@intel.com>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
@@ -251,7 +251,7 @@ struct e1000_phy_stats {
 /* This defines the bits that are set in the Interrupt Mask
  * Set/Read Register.  Each bit is documented below:
  *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
- *   o RXSEQ  = Receive Sequence Error 
+ *   o RXSEQ  = Receive Sequence Error
  */
 #define POLL_IMS_ENABLE_MASK ( \
     E1000_IMS_RXDMT0 |         \
@@ -275,7 +275,7 @@ struct e1000_phy_stats {
 /* The number of high/low register pairs in the RAR. The RAR (Receive Address
  * Registers) holds the directed and multicast addresses that we monitor. We
  * reserve one of these spots for our directed address, allowing us room for
- * E1000_RAR_ENTRIES - 1 multicast addresses. 
+ * E1000_RAR_ENTRIES - 1 multicast addresses.
  */
 #define E1000_RAR_ENTRIES 16
 
@@ -475,7 +475,7 @@ struct e1000_ffvt_entry {
 /* Register Set. (82543, 82544)
  *
  * Registers are defined to be 32 bits and  should be accessed as 32 bit values.
- * These registers are physically located on the NIC, but are mapped into the 
+ * These registers are physically located on the NIC, but are mapped into the
  * host memory address space.
  *
  * RW - register is both readable and writable
@@ -1248,7 +1248,7 @@ struct e1000_hw {
 #define E1000_MANC_IPV6_EN       0x00000800	/* Enable IPv6 */
 #define E1000_MANC_SNAP_EN       0x00001000	/* Accept LLC/SNAP */
 #define E1000_MANC_ARP_EN        0x00002000	/* Enable ARP Request Filtering */
-#define E1000_MANC_NEIGHBOR_EN   0x00004000	/* Enable Neighbor Discovery 
+#define E1000_MANC_NEIGHBOR_EN   0x00004000	/* Enable Neighbor Discovery
 						 * Filtering */
 #define E1000_MANC_TCO_RESET     0x00010000	/* TCO Reset Occurred */
 #define E1000_MANC_RCV_TCO_EN    0x00020000	/* Receive TCO Packets Enabled */
@@ -1287,9 +1287,9 @@ struct e1000_hw {
 #define ID_LED_RESERVED_0000 0x0000
 #define ID_LED_RESERVED_FFFF 0xFFFF
 #define ID_LED_DEFAULT       ((ID_LED_OFF1_ON2 << 12) | \
-                              (ID_LED_OFF1_OFF2 << 8) | \
-                              (ID_LED_DEF1_DEF2 << 4) | \
-                              (ID_LED_DEF1_DEF2))
+			      (ID_LED_OFF1_OFF2 << 8) | \
+			      (ID_LED_DEF1_DEF2 << 4) | \
+			      (ID_LED_DEF1_DEF2))
 #define ID_LED_DEF1_DEF2     0x1
 #define ID_LED_DEF1_ON2      0x2
 #define ID_LED_DEF1_OFF2     0x3
@@ -1410,26 +1410,26 @@ struct e1000_hw {
 
 /* The number of bits that we need to shift right to move the "pause"
  * bits from the EEPROM (bits 13:12) to the "pause" (bits 8:7) field
- * in the TXCW register 
+ * in the TXCW register
  */
 #define PAUSE_SHIFT 5
 
 /* The number of bits that we need to shift left to move the "SWDPIO"
  * bits from the EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field
- * in the CTRL register 
+ * in the CTRL register
  */
 #define SWDPIO_SHIFT 17
 
 /* The number of bits that we need to shift left to move the "SWDPIO_EXT"
  * bits from the EEPROM word F (bits 7:4) to the bits 11:8 of The
  * Extended CTRL register.
- * in the CTRL register 
+ * in the CTRL register
  */
 #define SWDPIO__EXT_SHIFT 4
 
 /* The number of bits that we need to shift left to move the "ILOS"
  * bit from the EEPROM (bit 4) to the "ILOS" (bit 7) field
- * in the CTRL register 
+ * in the CTRL register
  */
 #define ILOS_SHIFT  3
 
@@ -1446,7 +1446,7 @@ struct e1000_hw {
 /* TBI_ACCEPT macro definition:
  *
  * This macro requires:
- *      adapter = a pointer to struct e1000_hw 
+ *      adapter = a pointer to struct e1000_hw
  *      status = the 8 bit status field of the RX descriptor with EOP set
  *      error = the 8 bit error field of the RX descriptor with EOP set
  *      length = the sum of all the length fields of the RX descriptors that
@@ -1455,7 +1455,7 @@ struct e1000_hw {
  *      max_frame_length = the maximum frame length we want to accept.
  *      min_frame_length = the minimum frame length we want to accept.
  *
- * This macro is a conditional that should be used in the interrupt 
+ * This macro is a conditional that should be used in the interrupt
  * handler's Rx processing routine when RxErrors have been detected.
  *
  * Typical use:
@@ -1475,10 +1475,10 @@ struct e1000_hw {
      (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
      ((last_byte) == CARRIER_EXTENSION) && \
      (((status) & E1000_RXD_STAT_VP) ? \
-          (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
-           ((length) <= ((adapter)->max_frame_size + 1))) : \
-          (((length) > (adapter)->min_frame_size) && \
-           ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
+	  (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
+	   ((length) <= ((adapter)->max_frame_size + 1))) : \
+	  (((length) > (adapter)->min_frame_size) && \
+	   ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
 
 /* Structures, enums, and macros for the PHY */
 
@@ -1589,7 +1589,7 @@ struct e1000_hw {
 					 * 0 = cannot comply with msg
 					 */
 #define NPTX_MSG_PAGE       0x2000	/* formatted(1)/unformatted(0) pg */
-#define NPTX_NEXT_PAGE      0x8000	/* 1 = addition NP will follow 
+#define NPTX_NEXT_PAGE      0x8000	/* 1 = addition NP will follow
 					 * 0 = sending last NP
 					 */
 
@@ -1598,13 +1598,13 @@ struct e1000_hw {
 #define LP_RNPR_TOGGLE         0x0800	/* Toggles between exchanges
 					 * of different NP
 					 */
-#define LP_RNPR_ACKNOWLDGE2    0x1000	/* 1 = will comply with msg 
+#define LP_RNPR_ACKNOWLDGE2    0x1000	/* 1 = will comply with msg
 					 * 0 = cannot comply with msg
 					 */
 #define LP_RNPR_MSG_PAGE       0x2000	/* formatted(1)/unformatted(0) pg */
 #define LP_RNPR_ACKNOWLDGE     0x4000	/* 1 = ACK / 0 = NO ACK */
 #define LP_RNPR_NEXT_PAGE      0x8000	/* 1 = addition NP will follow
-					 * 0 = sending last NP 
+					 * 0 = sending last NP
 					 */
 
 /* 1000BASE-T Control Register */
@@ -1651,18 +1651,18 @@ struct e1000_hw {
 #define M88E1000_PSCR_JABBER_DISABLE    0x0001	/* 1=Jabber Function disabled */
 #define M88E1000_PSCR_POLARITY_REVERSAL 0x0002	/* 1=Polarity Reversal enabled */
 #define M88E1000_PSCR_SQE_TEST          0x0004	/* 1=SQE Test enabled */
-#define M88E1000_PSCR_CLK125_DISABLE    0x0010	/* 1=CLK125 low, 
+#define M88E1000_PSCR_CLK125_DISABLE    0x0010	/* 1=CLK125 low,
 						 * 0=CLK125 toggling
 						 */
 #define M88E1000_PSCR_MDI_MANUAL_MODE  0x0000	/* MDI Crossover Mode bits 6:5 */
 					       /* Manual MDI configuration */
 #define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020	/* Manual MDIX configuration */
 #define M88E1000_PSCR_AUTO_X_1000T     0x0040	/* 1000BASE-T: Auto crossover,
-						 *  100BASE-TX/10BASE-T: 
+						 *  100BASE-TX/10BASE-T:
 						 *  MDI Mode
 						 */
-#define M88E1000_PSCR_AUTO_X_MODE      0x0060	/* Auto crossover enabled 
-						 * all speeds. 
+#define M88E1000_PSCR_AUTO_X_MODE      0x0060	/* Auto crossover enabled
+						 * all speeds.
 						 */
 #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
 					/* 1=Enable Extended 10BASE-T distance
@@ -1703,7 +1703,7 @@ struct e1000_hw {
 #define M88E1000_EPSCR_DOWN_NO_IDLE   0x8000	/* 1=Lost lock detect enabled.
 						 * Will assert lost lock and bring
 						 * link down if idle not seen
-						 * within 1ms in 1000BASE-T 
+						 * within 1ms in 1000BASE-T
 						 */
 /* Number of times we will attempt to autonegotiate before downshifting if we
  * are the master */