summaryrefslogtreecommitdiff
path: root/drivers/dma/apbh_dma.c
diff options
context:
space:
mode:
authorMarek Vasut <marex@denx.de>2012-04-08 17:34:46 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-04-16 14:53:59 +0200
commit96666a39aed47c8c643dc7c6a6e15e314e63f42b (patch)
tree27d32d53fb14bc13a65e47b5de78590016687b95 /drivers/dma/apbh_dma.c
parentd71c9c9fc09babfdbcbf672ada763c97772839fc (diff)
downloadu-boot-imx-96666a39aed47c8c643dc7c6a6e15e314e63f42b.zip
u-boot-imx-96666a39aed47c8c643dc7c6a6e15e314e63f42b.tar.gz
u-boot-imx-96666a39aed47c8c643dc7c6a6e15e314e63f42b.tar.bz2
DMA: Split the APBH DMA init into block and channel init
This fixes the issue where mxs_dma_init() was called either twice or never, without introducing any new init hooks. The idea is to allow each and every device using the APBH DMA block to configure and request only the channels it uses, instead of making it call init for all the channels as is now. The common DMA block init part, which only configures the block, is then called from CPUs arch_cpu_init() call. NOTE: This patch depends on: http://patchwork.ozlabs.org/patch/150957/ Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Diffstat (limited to 'drivers/dma/apbh_dma.c')
-rw-r--r--drivers/dma/apbh_dma.c38
1 files changed, 17 insertions, 21 deletions
diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c
index c086629..cb2193e 100644
--- a/drivers/dma/apbh_dma.c
+++ b/drivers/dma/apbh_dma.c
@@ -316,7 +316,7 @@ static int mxs_dma_request(int channel)
* The channel will NOT be released if it's marked "busy" (see
* mxs_dma_enable()).
*/
-static int mxs_dma_release(int channel)
+int mxs_dma_release(int channel)
{
struct mxs_dma_chan *pchan;
int ret;
@@ -552,12 +552,10 @@ int mxs_dma_go(int chan)
/*
* Initialize the DMA hardware
*/
-int mxs_dma_init(void)
+void mxs_dma_init(void)
{
struct mx28_apbh_regs *apbh_regs =
(struct mx28_apbh_regs *)MXS_APBH_BASE;
- struct mxs_dma_chan *pchan;
- int ret, channel;
mx28_reset_block(&apbh_regs->hw_apbh_ctrl0_reg);
@@ -576,28 +574,26 @@ int mxs_dma_init(void)
writel(APBH_CTRL0_APB_BURST_EN,
&apbh_regs->hw_apbh_ctrl0_clr);
#endif
+}
- for (channel = 0; channel < MXS_MAX_DMA_CHANNELS; channel++) {
- pchan = mxs_dma_channels + channel;
- pchan->flags = MXS_DMA_FLAGS_VALID;
-
- ret = mxs_dma_request(channel);
+int mxs_dma_init_channel(int channel)
+{
+ struct mxs_dma_chan *pchan;
+ int ret;
- if (ret) {
- printf("MXS DMA: Can't acquire DMA channel %i\n",
- channel);
+ pchan = mxs_dma_channels + channel;
+ pchan->flags = MXS_DMA_FLAGS_VALID;
- goto err;
- }
+ ret = mxs_dma_request(channel);
- mxs_dma_reset(channel);
- mxs_dma_ack_irq(channel);
+ if (ret) {
+ printf("MXS DMA: Can't acquire DMA channel %i\n",
+ channel);
+ return ret;
}
- return 0;
+ mxs_dma_reset(channel);
+ mxs_dma_ack_irq(channel);
-err:
- while (--channel >= 0)
- mxs_dma_release(channel);
- return ret;
+ return 0;
}