summaryrefslogtreecommitdiff
path: root/drivers/cs8900.h
diff options
context:
space:
mode:
authorwdenk <wdenk>2002-11-03 00:38:21 +0000
committerwdenk <wdenk>2002-11-03 00:38:21 +0000
commitfe8c2806cdba70479e351299881a395dc2be7785 (patch)
treea1e8b98a1838cba6e6f5c765d9d85339257c45f5 /drivers/cs8900.h
parentf9087a3213cc245cf9b90436475b5af822bd7579 (diff)
downloadu-boot-imx-fe8c2806cdba70479e351299881a395dc2be7785.zip
u-boot-imx-fe8c2806cdba70479e351299881a395dc2be7785.tar.gz
u-boot-imx-fe8c2806cdba70479e351299881a395dc2be7785.tar.bz2
Initial revision
Diffstat (limited to 'drivers/cs8900.h')
-rw-r--r--drivers/cs8900.h256
1 files changed, 256 insertions, 0 deletions
diff --git a/drivers/cs8900.h b/drivers/cs8900.h
new file mode 100644
index 0000000..0a35ba6
--- /dev/null
+++ b/drivers/cs8900.h
@@ -0,0 +1,256 @@
+/*
+ * Cirrus Logic CS8900A Ethernet
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Copyright (C) 1999 Ben Williamson <benw@pobox.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is loaded into SRAM in bootstrap mode, where it waits
+ * for commands on UART1 to read and write memory, jump to code etc.
+ * A design goal for this program is to be entirely independent of the
+ * target board. Anything with a CL-PS7111 or EP7211 should be able to run
+ * this code in bootstrap mode. All the board specifics can be handled on
+ * the host.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/types.h>
+#include <config.h>
+
+#ifdef CONFIG_DRIVER_CS8900
+
+/* although the registers are 16 bit, they are 32-bit aligned on the
+ EDB7111. so we have to read them as 32-bit registers and ignore the
+ upper 16-bits. i'm not sure if this holds for the EDB7211. */
+
+#ifdef CS8900_BUS16
+ /* 16 bit aligned registers, 16 bit wide */
+ #define CS8900_REG u16
+ #define CS8900_OFF 0x02
+ #define CS8900_BUS16_0 *(volatile u8 *)(CS8900_BASE+0x00)
+ #define CS8900_BUS16_1 *(volatile u8 *)(CS8900_BASE+0x01)
+#elif CS8900_BUS32
+ /* 32 bit aligned registers, 16 bit wide (we ignore upper 16 bits) */
+ #define CS8900_REG u32
+ #define CS8900_OFF 0x04
+#else
+ #error unknown bussize ...
+#endif
+
+#define CS8900_RTDATA *(volatile CS8900_REG *)(CS8900_BASE+0x00*CS8900_OFF)
+#define CS8900_TxCMD *(volatile CS8900_REG *)(CS8900_BASE+0x02*CS8900_OFF)
+#define CS8900_TxLEN *(volatile CS8900_REG *)(CS8900_BASE+0x03*CS8900_OFF)
+#define CS8900_ISQ *(volatile CS8900_REG *)(CS8900_BASE+0x04*CS8900_OFF)
+#define CS8900_PPTR *(volatile CS8900_REG *)(CS8900_BASE+0x05*CS8900_OFF)
+#define CS8900_PDATA *(volatile CS8900_REG *)(CS8900_BASE+0x06*CS8900_OFF)
+
+
+#define ISQ_RxEvent 0x04
+#define ISQ_TxEvent 0x08
+#define ISQ_BufEvent 0x0C
+#define ISQ_RxMissEvent 0x10
+#define ISQ_TxColEvent 0x12
+#define ISQ_EventMask 0x3F
+
+/* packet page register offsets */
+
+/* bus interface registers */
+#define PP_ChipID 0x0000 /* Chip identifier - must be 0x630E */
+#define PP_ChipRev 0x0002 /* Chip revision, model codes */
+
+#define PP_IntReg 0x0022 /* Interrupt configuration */
+#define PP_IntReg_IRQ0 0x0000 /* Use INTR0 pin */
+#define PP_IntReg_IRQ1 0x0001 /* Use INTR1 pin */
+#define PP_IntReg_IRQ2 0x0002 /* Use INTR2 pin */
+#define PP_IntReg_IRQ3 0x0003 /* Use INTR3 pin */
+
+/* status and control registers */
+
+#define PP_RxCFG 0x0102 /* Receiver configuration */
+#define PP_RxCFG_Skip1 0x0040 /* Skip (i.e. discard) current frame */
+#define PP_RxCFG_Stream 0x0080 /* Enable streaming mode */
+#define PP_RxCFG_RxOK 0x0100 /* RxOK interrupt enable */
+#define PP_RxCFG_RxDMAonly 0x0200 /* Use RxDMA for all frames */
+#define PP_RxCFG_AutoRxDMA 0x0400 /* Select RxDMA automatically */
+#define PP_RxCFG_BufferCRC 0x0800 /* Include CRC characters in frame */
+#define PP_RxCFG_CRC 0x1000 /* Enable interrupt on CRC error */
+#define PP_RxCFG_RUNT 0x2000 /* Enable interrupt on RUNT frames */
+#define PP_RxCFG_EXTRA 0x4000 /* Enable interrupt on frames with extra data */
+
+#define PP_RxCTL 0x0104 /* Receiver control */
+#define PP_RxCTL_IAHash 0x0040 /* Accept frames that match hash */
+#define PP_RxCTL_Promiscuous 0x0080 /* Accept any frame */
+#define PP_RxCTL_RxOK 0x0100 /* Accept well formed frames */
+#define PP_RxCTL_Multicast 0x0200 /* Accept multicast frames */
+#define PP_RxCTL_IA 0x0400 /* Accept frame that matches IA */
+#define PP_RxCTL_Broadcast 0x0800 /* Accept broadcast frames */
+#define PP_RxCTL_CRC 0x1000 /* Accept frames with bad CRC */
+#define PP_RxCTL_RUNT 0x2000 /* Accept runt frames */
+#define PP_RxCTL_EXTRA 0x4000 /* Accept frames that are too long */
+
+#define PP_TxCFG 0x0106 /* Transmit configuration */
+#define PP_TxCFG_CRS 0x0040 /* Enable interrupt on loss of carrier */
+#define PP_TxCFG_SQE 0x0080 /* Enable interrupt on Signal Quality Error */
+#define PP_TxCFG_TxOK 0x0100 /* Enable interrupt on successful xmits */
+#define PP_TxCFG_Late 0x0200 /* Enable interrupt on "out of window" */
+#define PP_TxCFG_Jabber 0x0400 /* Enable interrupt on jabber detect */
+#define PP_TxCFG_Collision 0x0800 /* Enable interrupt if collision */
+#define PP_TxCFG_16Collisions 0x8000 /* Enable interrupt if > 16 collisions */
+
+#define PP_TxCmd 0x0108 /* Transmit command status */
+#define PP_TxCmd_TxStart_5 0x0000 /* Start after 5 bytes in buffer */
+#define PP_TxCmd_TxStart_381 0x0040 /* Start after 381 bytes in buffer */
+#define PP_TxCmd_TxStart_1021 0x0080 /* Start after 1021 bytes in buffer */
+#define PP_TxCmd_TxStart_Full 0x00C0 /* Start after all bytes loaded */
+#define PP_TxCmd_Force 0x0100 /* Discard any pending packets */
+#define PP_TxCmd_OneCollision 0x0200 /* Abort after a single collision */
+#define PP_TxCmd_NoCRC 0x1000 /* Do not add CRC */
+#define PP_TxCmd_NoPad 0x2000 /* Do not pad short packets */
+
+#define PP_BufCFG 0x010A /* Buffer configuration */
+#define PP_BufCFG_SWI 0x0040 /* Force interrupt via software */
+#define PP_BufCFG_RxDMA 0x0080 /* Enable interrupt on Rx DMA */
+#define PP_BufCFG_TxRDY 0x0100 /* Enable interrupt when ready for Tx */
+#define PP_BufCFG_TxUE 0x0200 /* Enable interrupt in Tx underrun */
+#define PP_BufCFG_RxMiss 0x0400 /* Enable interrupt on missed Rx packets */
+#define PP_BufCFG_Rx128 0x0800 /* Enable Rx interrupt after 128 bytes */
+#define PP_BufCFG_TxCol 0x1000 /* Enable int on Tx collision ctr overflow */
+#define PP_BufCFG_Miss 0x2000 /* Enable int on Rx miss ctr overflow */
+#define PP_BufCFG_RxDest 0x8000 /* Enable int on Rx dest addr match */
+
+#define PP_LineCTL 0x0112 /* Line control */
+#define PP_LineCTL_Rx 0x0040 /* Enable receiver */
+#define PP_LineCTL_Tx 0x0080 /* Enable transmitter */
+#define PP_LineCTL_AUIonly 0x0100 /* AUI interface only */
+#define PP_LineCTL_AutoAUI10BT 0x0200 /* Autodetect AUI or 10BaseT interface */
+#define PP_LineCTL_ModBackoffE 0x0800 /* Enable modified backoff algorithm */
+#define PP_LineCTL_PolarityDis 0x1000 /* Disable Rx polarity autodetect */
+#define PP_LineCTL_2partDefDis 0x2000 /* Disable two-part defferal */
+#define PP_LineCTL_LoRxSquelch 0x4000 /* Reduce receiver squelch threshold */
+
+#define PP_SelfCTL 0x0114 /* Chip self control */
+#define PP_SelfCTL_Reset 0x0040 /* Self-clearing reset */
+#define PP_SelfCTL_SWSuspend 0x0100 /* Initiate suspend mode */
+#define PP_SelfCTL_HWSleepE 0x0200 /* Enable SLEEP input */
+#define PP_SelfCTL_HWStandbyE 0x0400 /* Enable standby mode */
+#define PP_SelfCTL_HC0E 0x1000 /* use HCB0 for LINK LED */
+#define PP_SelfCTL_HC1E 0x2000 /* use HCB1 for BSTATUS LED */
+#define PP_SelfCTL_HCB0 0x4000 /* control LINK LED if HC0E set */
+#define PP_SelfCTL_HCB1 0x8000 /* control BSTATUS LED if HC1E set */
+
+#define PP_BusCTL 0x0116 /* Bus control */
+#define PP_BusCTL_ResetRxDMA 0x0040 /* Reset RxDMA pointer */
+#define PP_BusCTL_DMAextend 0x0100 /* Extend DMA cycle */
+#define PP_BusCTL_UseSA 0x0200 /* Assert MEMCS16 on address decode */
+#define PP_BusCTL_MemoryE 0x0400 /* Enable memory mode */
+#define PP_BusCTL_DMAburst 0x0800 /* Limit DMA access burst */
+#define PP_BusCTL_IOCHRDYE 0x1000 /* Set IOCHRDY high impedence */
+#define PP_BusCTL_RxDMAsize 0x2000 /* Set DMA buffer size 64KB */
+#define PP_BusCTL_EnableIRQ 0x8000 /* Generate interrupt on interrupt event */
+
+#define PP_TestCTL 0x0118 /* Test control */
+#define PP_TestCTL_DisableLT 0x0080 /* Disable link status */
+#define PP_TestCTL_ENDECloop 0x0200 /* Internal loopback */
+#define PP_TestCTL_AUIloop 0x0400 /* AUI loopback */
+#define PP_TestCTL_DisBackoff 0x0800 /* Disable backoff algorithm */
+#define PP_TestCTL_FDX 0x4000 /* Enable full duplex mode */
+
+#define PP_ISQ 0x0120 /* Interrupt Status Queue */
+
+#define PP_RER 0x0124 /* Receive event */
+#define PP_RER_IAHash 0x0040 /* Frame hash match */
+#define PP_RER_Dribble 0x0080 /* Frame had 1-7 extra bits after last byte */
+#define PP_RER_RxOK 0x0100 /* Frame received with no errors */
+#define PP_RER_Hashed 0x0200 /* Frame address hashed OK */
+#define PP_RER_IA 0x0400 /* Frame address matched IA */
+#define PP_RER_Broadcast 0x0800 /* Broadcast frame */
+#define PP_RER_CRC 0x1000 /* Frame had CRC error */
+#define PP_RER_RUNT 0x2000 /* Runt frame */
+#define PP_RER_EXTRA 0x4000 /* Frame was too long */
+
+#define PP_TER 0x0128 /* Transmit event */
+#define PP_TER_CRS 0x0040 /* Carrier lost */
+#define PP_TER_SQE 0x0080 /* Signal Quality Error */
+#define PP_TER_TxOK 0x0100 /* Packet sent without error */
+#define PP_TER_Late 0x0200 /* Out of window */
+#define PP_TER_Jabber 0x0400 /* Stuck transmit? */
+#define PP_TER_NumCollisions 0x7800 /* Number of collisions */
+#define PP_TER_16Collisions 0x8000 /* > 16 collisions */
+
+#define PP_BER 0x012C /* Buffer event */
+#define PP_BER_SWint 0x0040 /* Software interrupt */
+#define PP_BER_RxDMAFrame 0x0080 /* Received framed DMAed */
+#define PP_BER_Rdy4Tx 0x0100 /* Ready for transmission */
+#define PP_BER_TxUnderrun 0x0200 /* Transmit underrun */
+#define PP_BER_RxMiss 0x0400 /* Received frame missed */
+#define PP_BER_Rx128 0x0800 /* 128 bytes received */
+#define PP_BER_RxDest 0x8000 /* Received framed passed address filter */
+
+#define PP_RxMiss 0x0130 /* Receiver miss counter */
+
+#define PP_TxCol 0x0132 /* Transmit collision counter */
+
+#define PP_LineSTAT 0x0134 /* Line status */
+#define PP_LineSTAT_LinkOK 0x0080 /* Line is connected and working */
+#define PP_LineSTAT_AUI 0x0100 /* Connected via AUI */
+#define PP_LineSTAT_10BT 0x0200 /* Connected via twisted pair */
+#define PP_LineSTAT_Polarity 0x1000 /* Line polarity OK (10BT only) */
+#define PP_LineSTAT_CRS 0x4000 /* Frame being received */
+
+#define PP_SelfSTAT 0x0136 /* Chip self status */
+#define PP_SelfSTAT_33VActive 0x0040 /* supply voltage is 3.3V */
+#define PP_SelfSTAT_InitD 0x0080 /* Chip initialization complete */
+#define PP_SelfSTAT_SIBSY 0x0100 /* EEPROM is busy */
+#define PP_SelfSTAT_EEPROM 0x0200 /* EEPROM present */
+#define PP_SelfSTAT_EEPROM_OK 0x0400 /* EEPROM checks out */
+#define PP_SelfSTAT_ELPresent 0x0800 /* External address latch logic available */
+#define PP_SelfSTAT_EEsize 0x1000 /* Size of EEPROM */
+
+#define PP_BusSTAT 0x0138 /* Bus status */
+#define PP_BusSTAT_TxBid 0x0080 /* Tx error */
+#define PP_BusSTAT_TxRDY 0x0100 /* Ready for Tx data */
+
+#define PP_TDR 0x013C /* AUI Time Domain Reflectometer */
+
+/* initiate transmit registers */
+
+#define PP_TxCommand 0x0144 /* Tx Command */
+#define PP_TxLength 0x0146 /* Tx Length */
+
+
+/* address filter registers */
+
+#define PP_LAF 0x0150 /* Logical address filter (6 bytes) */
+#define PP_IA 0x0158 /* Individual address (MAC) */
+
+/* EEPROM Kram */
+#define SI_BUSY 0x0100
+#define PP_SelfST 0x0136 /* Self State register */
+#define PP_EECMD 0x0040 /* NVR Interface Command register */
+#define PP_EEData 0x0042 /* NVR Interface Data Register */
+#define EEPROM_WRITE_EN 0x00F0
+#define EEPROM_WRITE_DIS 0x0000
+#define EEPROM_WRITE_CMD 0x0100
+#define EEPROM_READ_CMD 0x0200
+
+
+
+#endif /* CONFIG_DRIVER_CS8900 */