Merge 'next' branch

Conflicts:

	board/freescale/mpc8536ds/mpc8536ds.c
	include/configs/mgcoge.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

8 files changed, 58 insertions, 58 deletions

diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 52fd108..2445e8c 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -676,7 +676,7 @@ void scsi_low_level_init(int busdevfunc)
 
 	linkmap = probe_ent->link_port_map;
 
-	for (i = 0; i < CFG_SCSI_MAX_SCSI_ID; i++) {
+	for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
 		if (((linkmap >> i) & 0x01)) {
 			if (ahci_port_start((u8) i)) {
 				printf("Can not start port %d\n", i);
diff --git a/drivers/block/ata_piix.c b/drivers/block/ata_piix.c
index 4c26b36..ec37687 100644
--- a/drivers/block/ata_piix.c
+++ b/drivers/block/ata_piix.c
@@ -35,7 +35,7 @@
 #include <ide.h>
 #include <ata.h>
 
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
 extern int curr_device;
 
 #define DEBUG_SATA 0		/*For debug prints set DEBUG_SATA to 1 */
@@ -173,10 +173,10 @@ init_sata (int dev)
 	    iobase4 | ATA_PCI_CTL_OFS;
 	port[1].ioaddr.bmdma_addr = iobase5 + 0x8;
 
-	for (i = 0; i < CFG_SATA_MAXBUS; i++)
+	for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++)
 		sata_port (&port[i].ioaddr);
 
-	for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+	for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
 		if (!(sata_bus_probe (i))) {
 			port[i].port_state = 0;
 			printf ("SATA#%d port is not present \n", i);
@@ -190,15 +190,15 @@ init_sata (int dev)
 		}
 	}
 
-	for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+	for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
 		u8 j, devno;
 
 		if (port[i].port_state == 0)
 			continue;
-		for (j = 0; j < CFG_SATA_DEVS_PER_BUS; j++) {
+		for (j = 0; j < CONFIG_SYS_SATA_DEVS_PER_BUS; j++) {
 			sata_identify (i, j);
 			set_Feature_cmd (i, j);
-			devno = i * CFG_SATA_DEVS_PER_BUS + j;
+			devno = i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
 			if ((sata_dev_desc[devno].lba > 0) &&
 			    (sata_dev_desc[devno].blksz > 0)) {
 				dev_print (&sata_dev_desc[devno]);
@@ -206,7 +206,7 @@ init_sata (int dev)
 				init_part (&sata_dev_desc[devno]);
 				if (curr_device < 0)
 					curr_device =
-					    i * CFG_SATA_DEVS_PER_BUS + j;
+					    i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
 			}
 		}
 	}
@@ -271,7 +271,7 @@ sata_bus_softreset (int num)
 
 	port[num].dev_mask = 0;
 
-	for (i = 0; i < CFG_SATA_DEVS_PER_BUS; i++) {
+	for (i = 0; i < CONFIG_SYS_SATA_DEVS_PER_BUS; i++) {
 		if (!(sata_devchk (&port[num].ioaddr, i))) {
 			PRINTF ("dev_chk failed for dev#%d\n", i);
 		} else {
@@ -328,7 +328,7 @@ sata_bus_softreset (int num)
 void
 sata_identify (int num, int dev)
 {
-	u8 cmd = 0, status = 0, devno = num * CFG_SATA_DEVS_PER_BUS + dev;
+	u8 cmd = 0, status = 0, devno = num * CONFIG_SYS_SATA_DEVS_PER_BUS + dev;
 	u16 iobuf[ATA_SECT_SIZE];
 	u64 n_sectors = 0;
 	u8 mask = 0;
@@ -564,10 +564,10 @@ sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buff)
 	}
 #endif
 	/*Port Number */
-	num = device / CFG_SATA_DEVS_PER_BUS;
+	num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
 	/*dev on the port */
-	if (device >= CFG_SATA_DEVS_PER_BUS)
-		dev = device - CFG_SATA_DEVS_PER_BUS;
+	if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
+		dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
 	else
 		dev = device;
 
@@ -671,10 +671,10 @@ sata_write (int device, ulong blknr,lbaint_t blkcnt, void * buff)
 	}
 #endif
 	/*Port Number */
-	num = device / CFG_SATA_DEVS_PER_BUS;
+	num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
 	/*dev on the Port */
-	if (device >= CFG_SATA_DEVS_PER_BUS)
-		dev = device - CFG_SATA_DEVS_PER_BUS;
+	if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
+		dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
 	else
 		dev = device;
 
diff --git a/drivers/block/ata_piix.h b/drivers/block/ata_piix.h
index f9f0194..11885af 100644
--- a/drivers/block/ata_piix.h
+++ b/drivers/block/ata_piix.h
@@ -88,7 +88,7 @@ int init_sata (int dev);
 #endif
 
 #ifdef DRV_DECL			/*Defines Driver Specific variables */
-struct sata_port port[CFG_SATA_MAXBUS];
+struct sata_port port[CONFIG_SYS_SATA_MAXBUS];
 #endif
 
 #endif /* __ATA_PIIX_H__ */
diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c
index 55f593a..2009d1e 100644
--- a/drivers/block/fsl_sata.c
+++ b/drivers/block/fsl_sata.c
@@ -26,23 +26,23 @@
 #include <fis.h>
 #include "fsl_sata.h"
 
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
 
-#ifndef CFG_SATA1_FLAGS
-	#define CFG_SATA1_FLAGS	FLAGS_DMA
+#ifndef CONFIG_SYS_SATA1_FLAGS
+	#define CONFIG_SYS_SATA1_FLAGS	FLAGS_DMA
 #endif
-#ifndef CFG_SATA2_FLAGS
-	#define CFG_SATA2_FLAGS	FLAGS_DMA
+#ifndef CONFIG_SYS_SATA2_FLAGS
+	#define CONFIG_SYS_SATA2_FLAGS	FLAGS_DMA
 #endif
 
 static struct fsl_sata_info fsl_sata_info[] = {
 #ifdef CONFIG_SATA1
-	{CFG_SATA1, CFG_SATA1_FLAGS},
+	{CONFIG_SYS_SATA1, CONFIG_SYS_SATA1_FLAGS},
 #else
 	{0, 0},
 #endif
 #ifdef CONFIG_SATA2
-	{CFG_SATA2, CFG_SATA2_FLAGS},
+	{CONFIG_SYS_SATA2, CONFIG_SYS_SATA2_FLAGS},
 #else
 	{0, 0},
 #endif
@@ -123,7 +123,7 @@ int init_sata(int dev)
 	int i;
 	fsl_sata_t *sata;
 
-	if (dev < 0 || dev > (CFG_SATA_MAX_DEVICE - 1)) {
+	if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
 		printf("the sata index %d is out of ranges\n\r", dev);
 		return -1;
 	}
diff --git a/drivers/block/sata_sil3114.c b/drivers/block/sata_sil3114.c
index 8399737..351cf99 100644
--- a/drivers/block/sata_sil3114.c
+++ b/drivers/block/sata_sil3114.c
@@ -48,9 +48,9 @@ static u8 sata_chk_status (struct sata_ioports *ioaddr, u8 usealtstatus);
 static void msleep (int count);
 
 static u32 iobase[6] = { 0, 0, 0, 0, 0, 0};	/* PCI BAR registers for device */
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
 
-static struct sata_port port[CFG_SATA_MAX_DEVICE];
+static struct sata_port port[CONFIG_SYS_SATA_MAX_DEVICE];
 
 static void output_data (struct sata_ioports *ioaddr, u16 * sect_buf, int words)
 {
diff --git a/drivers/block/sil680.c b/drivers/block/sil680.c
index 052c3d3..e21fb9b 100644
--- a/drivers/block/sil680.c
+++ b/drivers/block/sil680.c
@@ -32,25 +32,25 @@
  * #define CONFIG_PCI_PNP
  * NOTE it may also be necessary to define this if the default of 8 is
  * incorrect for the target board (e.g. the sequoia board requires 0).
- * #define CFG_PCI_CACHE_LINE_SIZE	0
+ * #define CONFIG_SYS_PCI_CACHE_LINE_SIZE	0
  *
  * #define CONFIG_CMD_IDE
  * #undef  CONFIG_IDE_8xx_DIRECT
  * #undef  CONFIG_IDE_LED
  * #undef  CONFIG_IDE_RESET
  * #define CONFIG_IDE_PREINIT
- * #define CFG_IDE_MAXBUS		2 - modify to suit
- * #define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) - modify to suit
- * #define CFG_ATA_BASE_ADDR	0
- * #define CFG_ATA_IDE0_OFFSET	0
- * #define CFG_ATA_IDE1_OFFSET	0
- * #define CFG_ATA_DATA_OFFSET	0
- * #define CFG_ATA_REG_OFFSET	0
- * #define CFG_ATA_ALT_OFFSET	0x0004
+ * #define CONFIG_SYS_IDE_MAXBUS		2 - modify to suit
+ * #define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) - modify to suit
+ * #define CONFIG_SYS_ATA_BASE_ADDR	0
+ * #define CONFIG_SYS_ATA_IDE0_OFFSET	0
+ * #define CONFIG_SYS_ATA_IDE1_OFFSET	0
+ * #define CONFIG_SYS_ATA_DATA_OFFSET	0
+ * #define CONFIG_SYS_ATA_REG_OFFSET	0
+ * #define CONFIG_SYS_ATA_ALT_OFFSET	0x0004
  *
  * The mapping for PCI IO-space.
  * NOTE this is the value for the sequoia board. Modify to suit.
- * #define CFG_PCI0_IO_SPACE   0xE8000000
+ * #define CONFIG_SYS_PCI0_IO_SPACE   0xE8000000
  */
 
 #include <common.h>
@@ -58,7 +58,7 @@
 #include <ide.h>
 #include <pci.h>
 
-extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
+extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
 
 int ide_preinit (void)
 {
@@ -67,7 +67,7 @@ int ide_preinit (void)
 	int l;
 
 	status = 1;
-	for (l = 0; l < CFG_IDE_MAXBUS; l++) {
+	for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) {
 		ide_bus_offset[l] = -ATA_STATUS;
 	}
 	devbusfn = pci_find_device (0x1095, 0x0680, 0);
@@ -77,11 +77,11 @@ int ide_preinit (void)
 		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
 				       (u32 *) &ide_bus_offset[0]);
 		ide_bus_offset[0] &= 0xfffffff8;
-		ide_bus_offset[0] += CFG_PCI0_IO_SPACE;
+		ide_bus_offset[0] += CONFIG_SYS_PCI0_IO_SPACE;
 		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2,
 				       (u32 *) &ide_bus_offset[1]);
 		ide_bus_offset[1] &= 0xfffffff8;
-		ide_bus_offset[1] += CFG_PCI0_IO_SPACE;
+		ide_bus_offset[1] += CONFIG_SYS_PCI0_IO_SPACE;
 		/* init various things - taken from the Linux driver */
 		/* set PIO mode */
 		pci_write_config_byte(devbusfn, 0x80, 0x00);
diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c
index 44e998b..0c60bf8 100644
--- a/drivers/block/sym53c8xx.c
+++ b/drivers/block/sym53c8xx.c
@@ -426,7 +426,7 @@ void scsi_bus_reset(void)
 {
 	unsigned char t;
 	int i;
-	int end = CFG_SCSI_SPIN_UP_TIME*1000;
+	int end = CONFIG_SYS_SCSI_SPIN_UP_TIME*1000;
 
 	t=scsi_read_byte(SCNTL1);
 	scsi_write_byte(SCNTL1,(t | CRST));
@@ -836,10 +836,10 @@ void scsi_chip_init(void)
 	scsi_write_byte(SCNTL0,0xC0); /* full arbitration no start, no message, parity disabled, master */
 	scsi_write_byte(SCNTL1,0x00);
 	scsi_write_byte(SCNTL2,0x00);
-#ifndef CFG_SCSI_SYM53C8XX_CCF    /* config value for none 40 mhz clocks */
+#ifndef CONFIG_SYS_SCSI_SYM53C8XX_CCF    /* config value for none 40 mhz clocks */
 	scsi_write_byte(SCNTL3,0x13); /* synchronous clock 40/4=10MHz, asynchronous 40MHz */
 #else
-	scsi_write_byte(SCNTL3,CFG_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */
+	scsi_write_byte(SCNTL3,CONFIG_SYS_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */
 #endif
 	scsi_write_byte(SCID,0x47); /* ID=7, enable reselection */
 	scsi_write_byte(SXFER,0x00); /* synchronous transfer period 10MHz, asynchronous */
diff --git a/drivers/block/systemace.c b/drivers/block/systemace.c
index dfaab52..e8dff0a 100644
--- a/drivers/block/systemace.c
+++ b/drivers/block/systemace.c
@@ -20,7 +20,7 @@
 
 /*
  * The Xilinx SystemACE chip support is activated by defining
- * CONFIG_SYSTEMACE to turn on support, and CFG_SYSTEMACE_BASE
+ * CONFIG_SYSTEMACE to turn on support, and CONFIG_SYS_SYSTEMACE_BASE
  * to set the base address of the device. This code currently
  * assumes that the chip is connected via a byte-wide bus.
  *
@@ -47,25 +47,25 @@
 /*
  * The ace_readw and writew functions read/write 16bit words, but the
  * offset value is the BYTE offset as most used in the Xilinx
- * datasheet for the SystemACE chip. The CFG_SYSTEMACE_BASE is defined
+ * datasheet for the SystemACE chip. The CONFIG_SYS_SYSTEMACE_BASE is defined
  * to be the base address for the chip, usually in the local
  * peripheral bus.
  */
-#if (CFG_SYSTEMACE_WIDTH == 8)
+#if (CONFIG_SYS_SYSTEMACE_WIDTH == 8)
 #if !defined(__BIG_ENDIAN)
-#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)<<8) | \
-			(readb(CFG_SYSTEMACE_BASE+off+1)))
-#define ace_writew(val, off) {writeb(val>>8, CFG_SYSTEMACE_BASE+off); \
-			      writeb(val, CFG_SYSTEMACE_BASE+off+1);}
+#define ace_readw(off) ((readb(CONFIG_SYS_SYSTEMACE_BASE+off)<<8) | \
+			(readb(CONFIG_SYS_SYSTEMACE_BASE+off+1)))
+#define ace_writew(val, off) {writeb(val>>8, CONFIG_SYS_SYSTEMACE_BASE+off); \
+			      writeb(val, CONFIG_SYS_SYSTEMACE_BASE+off+1);}
 #else
-#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)) | \
-			(readb(CFG_SYSTEMACE_BASE+off+1)<<8))
-#define ace_writew(val, off) {writeb(val, CFG_SYSTEMACE_BASE+off); \
-			      writeb(val>>8, CFG_SYSTEMACE_BASE+off+1);}
+#define ace_readw(off) ((readb(CONFIG_SYS_SYSTEMACE_BASE+off)) | \
+			(readb(CONFIG_SYS_SYSTEMACE_BASE+off+1)<<8))
+#define ace_writew(val, off) {writeb(val, CONFIG_SYS_SYSTEMACE_BASE+off); \
+			      writeb(val>>8, CONFIG_SYS_SYSTEMACE_BASE+off+1);}
 #endif
 #else
-#define ace_readw(off) (in16(CFG_SYSTEMACE_BASE+off))
-#define ace_writew(val, off) (out16(CFG_SYSTEMACE_BASE+off,val))
+#define ace_readw(off) (in16(CONFIG_SYS_SYSTEMACE_BASE+off))
+#define ace_writew(val, off) (out16(CONFIG_SYS_SYSTEMACE_BASE+off,val))
 #endif
 
 /* */
@@ -120,7 +120,7 @@ block_dev_desc_t *systemace_get_dev(int dev)
 		/*
 		 * Ensure the correct bus mode (8/16 bits) gets enabled
 		 */
-		ace_writew(CFG_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0);
+		ace_writew(CONFIG_SYS_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0);
 
 		init_part(&systemace_dev);