Merge git://www.denx.de/git/u-boot-marvell

Conflicts:
	arch/arm/Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>

3 files changed, 1049 insertions, 3 deletions

diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index f161c01..eb8bda9 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_MVSATA_IDE) += mvsata_ide.o
 obj-$(CONFIG_MX51_PATA) += mxc_ata.o
 obj-$(CONFIG_PATA_BFIN) += pata_bfin.o
 obj-$(CONFIG_SATA_DWC) += sata_dwc.o
+obj-$(CONFIG_SATA_MV) += sata_mv.o
 obj-$(CONFIG_SATA_SIL3114) += sata_sil3114.o
 obj-$(CONFIG_SATA_SIL) += sata_sil.o
 obj-$(CONFIG_IDE_SIL680) += sil680.o
diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c
index 52c1602..2c6d424 100644
--- a/drivers/block/mvsata_ide.c
+++ b/drivers/block/mvsata_ide.c
@@ -13,7 +13,7 @@
 #include <asm/arch/orion5x.h>
 #elif defined(CONFIG_KIRKWOOD)
 #include <asm/arch/soc.h>
-#elif defined(CONFIG_ARMADA_XP)
+#elif defined(CONFIG_ARCH_MVEBU)
 #include <linux/mbus.h>
 #endif
 
@@ -102,7 +102,7 @@ struct mvsata_port_registers {
  * Initialize SATA memory windows for Armada XP
  */
 
-#ifdef CONFIG_ARMADA_XP
+#ifdef CONFIG_ARCH_MVEBU
 static void mvsata_ide_conf_mbus_windows(void)
 {
 	const struct mbus_dram_target_info *dram;
@@ -174,7 +174,7 @@ int ide_preinit(void)
 	int ret = MVSATA_STATUS_TIMEOUT;
 	int status;
 
-#ifdef CONFIG_ARMADA_XP
+#ifdef CONFIG_ARCH_MVEBU
 	mvsata_ide_conf_mbus_windows();
 #endif
 
diff --git a/drivers/block/sata_mv.c b/drivers/block/sata_mv.c
new file mode 100644
index 0000000..8824934
--- /dev/null
+++ b/drivers/block/sata_mv.c
@@ -0,0 +1,1045 @@
+/*
+ * Copyright (C) Excito Elektronik i Skåne AB, 2010.
+ * Author: Tor Krill <tor@excito.com>
+ *
+ * Copyright (C) 2015 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * This driver supports the SATA controller of some Mavell SoC's.
+ * Here a (most likely incomplete) list of the supported SoC's:
+ * - Kirkwood
+ * - Armada 370
+ * - Armada XP
+ *
+ * This driver implementation is an alternative to the already available
+ * driver via the "ide" commands interface (drivers/block/mvsata_ide.c).
+ * But this driver only supports PIO mode and as this new driver also
+ * supports transfer via DMA, its much faster.
+ *
+ * Please note, that the newer SoC's (e.g. Armada 38x) are not supported
+ * by this driver. As they have an AHCI compatible SATA controller
+ * integrated.
+ */
+
+/*
+ * TODO:
+ * Better error recovery
+ * No support for using PRDs (Thus max 64KB transfers)
+ * No NCQ support
+ * No port multiplier support
+ */
+
+#include <common.h>
+#include <fis.h>
+#include <libata.h>
+#include <malloc.h>
+#include <sata.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <linux/mbus.h>
+
+#if defined(CONFIG_KIRKWOOD)
+#include <asm/arch/kirkwood.h>
+#define SATAHC_BASE		KW_SATA_BASE
+#else
+#include <asm/arch/soc.h>
+#define SATAHC_BASE		MVEBU_AXP_SATA_BASE
+#endif
+
+#define SATA0_BASE		(SATAHC_BASE + 0x2000)
+#define SATA1_BASE		(SATAHC_BASE + 0x4000)
+
+/* EDMA registers */
+#define EDMA_CFG		0x000
+#define EDMA_CFG_NCQ		(1 << 5)
+#define EDMA_CFG_EQUE		(1 << 9)
+#define EDMA_TIMER		0x004
+#define EDMA_IECR		0x008
+#define EDMA_IEMR		0x00c
+#define EDMA_RQBA_HI		0x010
+#define EDMA_RQIPR		0x014
+#define EDMA_RQIPR_IPMASK	(0x1f << 5)
+#define EDMA_RQIPR_IPSHIFT	5
+#define EDMA_RQOPR		0x018
+#define EDMA_RQOPR_OPMASK	(0x1f << 5)
+#define EDMA_RQOPR_OPSHIFT	5
+#define EDMA_RSBA_HI		0x01c
+#define EDMA_RSIPR		0x020
+#define EDMA_RSIPR_IPMASK	(0x1f << 3)
+#define EDMA_RSIPR_IPSHIFT	3
+#define	EDMA_RSOPR		0x024
+#define EDMA_RSOPR_OPMASK	(0x1f << 3)
+#define EDMA_RSOPR_OPSHIFT	3
+#define EDMA_CMD		0x028
+#define EDMA_CMD_ENEDMA		(0x01 << 0)
+#define EDMA_CMD_DISEDMA	(0x01 << 1)
+#define EDMA_CMD_ATARST		(0x01 << 2)
+#define EDMA_CMD_FREEZE		(0x01 << 4)
+#define EDMA_TEST_CTL		0x02c
+#define EDMA_STATUS		0x030
+#define EDMA_IORTO		0x034
+#define EDMA_CDTR		0x040
+#define EDMA_HLTCND		0x060
+#define EDMA_NTSR		0x094
+
+/* Basic DMA registers */
+#define BDMA_CMD		0x224
+#define BDMA_STATUS		0x228
+#define BDMA_DTLB		0x22c
+#define BDMA_DTHB		0x230
+#define BDMA_DRL		0x234
+#define BDMA_DRH		0x238
+
+/* SATA Interface registers */
+#define SIR_ICFG		0x050
+#define SIR_CFG_GEN2EN		(0x1 << 7)
+#define SIR_PLL_CFG		0x054
+#define SIR_SSTATUS		0x300
+#define SSTATUS_DET_MASK	(0x0f << 0)
+#define SIR_SERROR		0x304
+#define SIR_SCONTROL		0x308
+#define SIR_SCONTROL_DETEN	(0x01 << 0)
+#define SIR_LTMODE		0x30c
+#define SIR_LTMODE_NELBE	(0x01 << 7)
+#define SIR_PHYMODE3		0x310
+#define SIR_PHYMODE4		0x314
+#define SIR_PHYMODE1		0x32c
+#define SIR_PHYMODE2		0x330
+#define SIR_BIST_CTRL		0x334
+#define SIR_BIST_DW1		0x338
+#define SIR_BIST_DW2		0x33c
+#define SIR_SERR_IRQ_MASK	0x340
+#define SIR_SATA_IFCTRL		0x344
+#define SIR_SATA_TESTCTRL	0x348
+#define SIR_SATA_IFSTATUS	0x34c
+#define SIR_VEND_UNIQ		0x35c
+#define SIR_FIS_CFG		0x360
+#define SIR_FIS_IRQ_CAUSE	0x364
+#define SIR_FIS_IRQ_MASK	0x368
+#define SIR_FIS_DWORD0		0x370
+#define SIR_FIS_DWORD1		0x374
+#define SIR_FIS_DWORD2		0x378
+#define SIR_FIS_DWORD3		0x37c
+#define SIR_FIS_DWORD4		0x380
+#define SIR_FIS_DWORD5		0x384
+#define SIR_FIS_DWORD6		0x388
+#define SIR_PHYM9_GEN2		0x398
+#define SIR_PHYM9_GEN1		0x39c
+#define SIR_PHY_CFG		0x3a0
+#define SIR_PHYCTL		0x3a4
+#define SIR_PHYM10		0x3a8
+#define SIR_PHYM12		0x3b0
+
+/* Shadow registers */
+#define	PIO_DATA		0x100
+#define PIO_ERR_FEATURES	0x104
+#define PIO_SECTOR_COUNT	0x108
+#define PIO_LBA_LOW		0x10c
+#define PIO_LBA_MID		0x110
+#define PIO_LBA_HI		0x114
+#define PIO_DEVICE		0x118
+#define PIO_CMD_STATUS		0x11c
+#define PIO_STATUS_ERR		(0x01 << 0)
+#define PIO_STATUS_DRQ		(0x01 << 3)
+#define PIO_STATUS_DF		(0x01 << 5)
+#define PIO_STATUS_DRDY		(0x01 << 6)
+#define PIO_STATUS_BSY		(0x01 << 7)
+#define PIO_CTRL_ALTSTAT	0x120
+
+/* SATAHC arbiter registers */
+#define SATAHC_CFG		0x000
+#define SATAHC_RQOP		0x004
+#define SATAHC_RQIP		0x008
+#define SATAHC_ICT		0x00c
+#define SATAHC_ITT		0x010
+#define SATAHC_ICR		0x014
+#define SATAHC_ICR_PORT0	(0x01 << 0)
+#define SATAHC_ICR_PORT1	(0x01 << 1)
+#define SATAHC_MIC		0x020
+#define SATAHC_MIM		0x024
+#define SATAHC_LED_CFG		0x02c
+
+#define REQUEST_QUEUE_SIZE	32
+#define RESPONSE_QUEUE_SIZE	REQUEST_QUEUE_SIZE
+
+struct crqb {
+	u32 dtb_low;		/* DW0 */
+	u32 dtb_high;		/* DW1 */
+	u32 control_flags;	/* DW2 */
+	u32 drb_count;		/* DW3 */
+	u32 ata_cmd_feat;	/* DW4 */
+	u32 ata_addr;		/* DW5 */
+	u32 ata_addr_exp;	/* DW6 */
+	u32 ata_sect_count;	/* DW7 */
+};
+
+#define CRQB_ALIGN			0x400
+
+#define CRQB_CNTRLFLAGS_DIR		(0x01 << 0)
+#define CRQB_CNTRLFLAGS_DQTAGMASK	(0x1f << 1)
+#define CRQB_CNTRLFLAGS_DQTAGSHIFT	1
+#define CRQB_CNTRLFLAGS_PMPORTMASK	(0x0f << 12)
+#define CRQB_CNTRLFLAGS_PMPORTSHIFT	12
+#define CRQB_CNTRLFLAGS_PRDMODE		(0x01 << 16)
+#define CRQB_CNTRLFLAGS_HQTAGMASK	(0x1f << 17)
+#define CRQB_CNTRLFLAGS_HQTAGSHIFT	17
+
+#define CRQB_CMDFEAT_CMDMASK		(0xff << 16)
+#define CRQB_CMDFEAT_CMDSHIFT		16
+#define CRQB_CMDFEAT_FEATMASK		(0xff << 16)
+#define CRQB_CMDFEAT_FEATSHIFT		24
+
+#define CRQB_ADDR_LBA_LOWMASK		(0xff << 0)
+#define CRQB_ADDR_LBA_LOWSHIFT		0
+#define CRQB_ADDR_LBA_MIDMASK		(0xff << 8)
+#define CRQB_ADDR_LBA_MIDSHIFT		8
+#define CRQB_ADDR_LBA_HIGHMASK		(0xff << 16)
+#define CRQB_ADDR_LBA_HIGHSHIFT		16
+#define CRQB_ADDR_DEVICE_MASK		(0xff << 24)
+#define CRQB_ADDR_DEVICE_SHIFT		24
+
+#define CRQB_ADDR_LBA_LOW_EXP_MASK	(0xff << 0)
+#define CRQB_ADDR_LBA_LOW_EXP_SHIFT	0
+#define CRQB_ADDR_LBA_MID_EXP_MASK	(0xff << 8)
+#define CRQB_ADDR_LBA_MID_EXP_SHIFT	8
+#define CRQB_ADDR_LBA_HIGH_EXP_MASK	(0xff << 16)
+#define CRQB_ADDR_LBA_HIGH_EXP_SHIFT	16
+#define CRQB_ADDR_FEATURE_EXP_MASK	(0xff << 24)
+#define CRQB_ADDR_FEATURE_EXP_SHIFT	24
+
+#define CRQB_SECTCOUNT_COUNT_MASK	(0xff << 0)
+#define CRQB_SECTCOUNT_COUNT_SHIFT	0
+#define CRQB_SECTCOUNT_COUNT_EXP_MASK	(0xff << 8)
+#define CRQB_SECTCOUNT_COUNT_EXP_SHIFT	8
+
+#define MVSATA_WIN_CONTROL(w)	(MVEBU_AXP_SATA_BASE + 0x30 + ((w) << 4))
+#define MVSATA_WIN_BASE(w)	(MVEBU_AXP_SATA_BASE + 0x34 + ((w) << 4))
+
+struct eprd {
+	u32 phyaddr_low;
+	u32 bytecount_eot;
+	u32 phyaddr_hi;
+	u32 reserved;
+};
+
+#define EPRD_PHYADDR_MASK	0xfffffffe
+#define EPRD_BYTECOUNT_MASK	0x0000ffff
+#define EPRD_EOT		(0x01 << 31)
+
+struct crpb {
+	u32 id;
+	u32 flags;
+	u32 timestamp;
+};
+
+#define CRPB_ALIGN		0x100
+
+#define READ_CMD		0
+#define WRITE_CMD		1
+
+/*
+ * Since we don't use PRDs yet max transfer size
+ * is 64KB
+ */
+#define MV_ATA_MAX_SECTORS	(65535 / ATA_SECT_SIZE)
+
+/* Keep track if hw is initialized or not */
+static u32 hw_init;
+
+struct mv_priv {
+	char name[12];
+	u32 link;
+	u32 regbase;
+	u32 queue_depth;
+	u16 pio;
+	u16 mwdma;
+	u16 udma;
+
+	void *crqb_alloc;
+	struct crqb *request;
+
+	void *crpb_alloc;
+	struct crpb *response;
+};
+
+static int ata_wait_register(u32 *addr, u32 mask, u32 val, u32 timeout_msec)
+{
+	ulong start;
+
+	start = get_timer(0);
+	do {
+		if ((in_le32(addr) & mask) == val)
+			return 0;
+	} while (get_timer(start) < timeout_msec);
+
+	return -ETIMEDOUT;
+}
+
+/* Cut from sata_mv in linux kernel */
+static int mv_stop_edma_engine(int port)
+{
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+	int i;
+
+	/* Disable eDMA. The disable bit auto clears. */
+	out_le32(priv->regbase + EDMA_CMD, EDMA_CMD_DISEDMA);
+
+	/* Wait for the chip to confirm eDMA is off. */
+	for (i = 10000; i > 0; i--) {
+		u32 reg = in_le32(priv->regbase + EDMA_CMD);
+		if (!(reg & EDMA_CMD_ENEDMA)) {
+			debug("EDMA stop on port %d succesful\n", port);
+			return 0;
+		}
+		udelay(10);
+	}
+	debug("EDMA stop on port %d failed\n", port);
+	return -1;
+}
+
+static int mv_start_edma_engine(int port)
+{
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+	u32 tmp;
+
+	/* Check preconditions */
+	tmp = in_le32(priv->regbase + SIR_SSTATUS);
+	if ((tmp & SSTATUS_DET_MASK) != 0x03) {
+		printf("Device error on port: %d\n", port);
+		return -1;
+	}
+
+	tmp = in_le32(priv->regbase + PIO_CMD_STATUS);
+	if (tmp & (ATA_BUSY | ATA_DRQ)) {
+		printf("Device not ready on port: %d\n", port);
+		return -1;
+	}
+
+	/* Clear interrupt cause */
+	out_le32(priv->regbase + EDMA_IECR, 0x0);
+
+	tmp = in_le32(SATAHC_BASE + SATAHC_ICR);
+	tmp &= ~(port == 0 ? SATAHC_ICR_PORT0 : SATAHC_ICR_PORT1);
+	out_le32(SATAHC_BASE + SATAHC_ICR, tmp);
+
+	/* Configure edma operation */
+	tmp = in_le32(priv->regbase + EDMA_CFG);
+	tmp &= ~EDMA_CFG_NCQ;	/* No NCQ */
+	tmp &= ~EDMA_CFG_EQUE;	/* Dont queue operations */
+	out_le32(priv->regbase + EDMA_CFG, tmp);
+
+	out_le32(priv->regbase + SIR_FIS_IRQ_CAUSE, 0x0);
+
+	/* Configure fis, set all to no-wait for now */
+	out_le32(priv->regbase + SIR_FIS_CFG, 0x0);
+
+	/* Setup request queue */
+	out_le32(priv->regbase + EDMA_RQBA_HI, 0x0);
+	out_le32(priv->regbase + EDMA_RQIPR, priv->request);
+	out_le32(priv->regbase + EDMA_RQOPR, 0x0);
+
+	/* Setup response queue */
+	out_le32(priv->regbase + EDMA_RSBA_HI, 0x0);
+	out_le32(priv->regbase + EDMA_RSOPR, priv->response);
+	out_le32(priv->regbase + EDMA_RSIPR, 0x0);
+
+	/* Start edma */
+	out_le32(priv->regbase + EDMA_CMD, EDMA_CMD_ENEDMA);
+
+	return 0;
+}
+
+static int mv_reset_channel(int port)
+{
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+
+	/* Make sure edma is stopped  */
+	mv_stop_edma_engine(port);
+
+	out_le32(priv->regbase + EDMA_CMD, EDMA_CMD_ATARST);
+	udelay(25);		/* allow reset propagation */
+	out_le32(priv->regbase + EDMA_CMD, 0);
+	mdelay(10);
+
+	return 0;
+}
+
+static void mv_reset_port(int port)
+{
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+
+	mv_reset_channel(port);
+
+	out_le32(priv->regbase + EDMA_CMD, 0x0);
+	out_le32(priv->regbase + EDMA_CFG, 0x101f);
+	out_le32(priv->regbase + EDMA_IECR, 0x0);
+	out_le32(priv->regbase + EDMA_IEMR, 0x0);
+	out_le32(priv->regbase + EDMA_RQBA_HI, 0x0);
+	out_le32(priv->regbase + EDMA_RQIPR, 0x0);
+	out_le32(priv->regbase + EDMA_RQOPR, 0x0);
+	out_le32(priv->regbase + EDMA_RSBA_HI, 0x0);
+	out_le32(priv->regbase + EDMA_RSIPR, 0x0);
+	out_le32(priv->regbase + EDMA_RSOPR, 0x0);
+	out_le32(priv->regbase + EDMA_IORTO, 0xfa);
+}
+
+static void mv_reset_one_hc(void)
+{
+	out_le32(SATAHC_BASE + SATAHC_ICT, 0x00);
+	out_le32(SATAHC_BASE + SATAHC_ITT, 0x00);
+	out_le32(SATAHC_BASE + SATAHC_ICR, 0x00);
+}
+
+static int probe_port(int port)
+{
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+	int tries, tries2, set15 = 0;
+	u32 tmp;
+
+	debug("Probe port: %d\n", port);
+
+	for (tries = 0; tries < 2; tries++) {
+		/* Clear SError */
+		out_le32(priv->regbase + SIR_SERROR, 0x0);
+
+		/* trigger com-init */
+		tmp = in_le32(priv->regbase + SIR_SCONTROL);
+		tmp = (tmp & 0x0f0) | 0x300 | SIR_SCONTROL_DETEN;
+		out_le32(priv->regbase + SIR_SCONTROL, tmp);
+
+		mdelay(1);
+
+		tmp = in_le32(priv->regbase + SIR_SCONTROL);
+		tries2 = 5;
+		do {
+			tmp = (tmp & 0x0f0) | 0x300;
+			out_le32(priv->regbase + SIR_SCONTROL, tmp);
+			mdelay(10);
+			tmp = in_le32(priv->regbase + SIR_SCONTROL);
+		} while ((tmp & 0xf0f) != 0x300 && tries2--);
+
+		mdelay(10);
+
+		for (tries2 = 0; tries2 < 200; tries2++) {
+			tmp = in_le32(priv->regbase + SIR_SSTATUS);
+			if ((tmp & SSTATUS_DET_MASK) == 0x03) {
+				debug("Found device on port\n");
+				return 0;
+			}
+			mdelay(1);
+		}
+
+		if ((tmp & SSTATUS_DET_MASK) == 0) {
+			debug("No device attached on port %d\n", port);
+			return -ENODEV;
+		}
+
+		if (!set15) {
+			/* Try on 1.5Gb/S */
+			debug("Try 1.5Gb link\n");
+			set15 = 1;
+			out_le32(priv->regbase + SIR_SCONTROL, 0x304);
+
+			tmp = in_le32(priv->regbase + SIR_ICFG);
+			tmp &= ~SIR_CFG_GEN2EN;
+			out_le32(priv->regbase + SIR_ICFG, tmp);
+
+			mv_reset_channel(port);
+		}
+	}
+
+	debug("Failed to probe port\n");
+	return -1;
+}
+
+/* Get request queue in pointer */
+static int get_reqip(int port)
+{
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+	u32 tmp;
+
+	tmp = in_le32(priv->regbase + EDMA_RQIPR) & EDMA_RQIPR_IPMASK;
+	tmp = tmp >> EDMA_RQIPR_IPSHIFT;
+
+	return tmp;
+}
+
+static void set_reqip(int port, int reqin)
+{
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+	u32 tmp;
+
+	tmp = in_le32(priv->regbase + EDMA_RQIPR) & ~EDMA_RQIPR_IPMASK;
+	tmp |= ((reqin << EDMA_RQIPR_IPSHIFT) & EDMA_RQIPR_IPMASK);
+	out_le32(priv->regbase + EDMA_RQIPR, tmp);
+}
+
+/* Get next available slot, ignoring possible overwrite */
+static int get_next_reqip(int port)
+{
+	int slot = get_reqip(port);
+	slot = (slot + 1) % REQUEST_QUEUE_SIZE;
+	return slot;
+}
+
+/* Get response queue in pointer */
+static int get_rspip(int port)
+{
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+	u32 tmp;
+
+	tmp = in_le32(priv->regbase + EDMA_RSIPR) & EDMA_RSIPR_IPMASK;
+	tmp = tmp >> EDMA_RSIPR_IPSHIFT;
+
+	return tmp;
+}
+
+/* Get response queue out pointer */
+static int get_rspop(int port)
+{
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+	u32 tmp;
+
+	tmp = in_le32(priv->regbase + EDMA_RSOPR) & EDMA_RSOPR_OPMASK;
+	tmp = tmp >> EDMA_RSOPR_OPSHIFT;
+	return tmp;
+}
+
+/* Get next response queue pointer  */
+static int get_next_rspop(int port)
+{
+	return (get_rspop(port) + 1) % RESPONSE_QUEUE_SIZE;
+}
+
+/* Set response queue pointer */
+static void set_rspop(int port, int reqin)
+{
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+	u32 tmp;
+
+	tmp = in_le32(priv->regbase + EDMA_RSOPR) & ~EDMA_RSOPR_OPMASK;
+	tmp |= ((reqin << EDMA_RSOPR_OPSHIFT) & EDMA_RSOPR_OPMASK);
+
+	out_le32(priv->regbase + EDMA_RSOPR, tmp);
+}
+
+static int wait_dma_completion(int port, int index, u32 timeout_msec)
+{
+	u32 tmp, res;
+
+	tmp = port == 0 ? SATAHC_ICR_PORT0 : SATAHC_ICR_PORT1;
+	res = ata_wait_register((u32 *)(SATAHC_BASE + SATAHC_ICR), tmp,
+				tmp, timeout_msec);
+	if (res)
+		printf("Failed to wait for completion on port %d\n", port);
+
+	return res;
+}
+
+static void process_responses(int port)
+{
+#ifdef DEBUG
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+#endif
+	u32 tmp;
+	u32 outind = get_rspop(port);
+
+	/* Ack interrupts */
+	tmp = in_le32(SATAHC_BASE + SATAHC_ICR);
+	if (port == 0)
+		tmp &= ~(BIT(0) | BIT(8));
+	else
+		tmp &= ~(BIT(1) | BIT(9));
+	tmp &= ~(BIT(4));
+	out_le32(SATAHC_BASE + SATAHC_ICR, tmp);
+
+	while (get_rspip(port) != outind) {
+#ifdef DEBUG
+		debug("Response index %d flags %08x on port %d\n", outind,
+		      priv->response[outind].flags, port);
+#endif
+		outind = get_next_rspop(port);
+		set_rspop(port, outind);
+	}
+}
+
+static int mv_ata_exec_ata_cmd(int port, struct sata_fis_h2d *cfis,
+			       u8 *buffer, u32 len, u32 iswrite)
+{
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+	struct crqb *req;
+	int slot;
+
+	if (len >= 64 * 1024) {
+		printf("We only support <64K transfers for now\n");
+		return -1;
+	}
+
+	/* Initialize request */
+	slot = get_reqip(port);
+	memset(&priv->request[slot], 0, sizeof(struct crqb));
+	req = &priv->request[slot];
+
+	req->dtb_low = (u32)buffer;
+
+	/* Dont use PRDs */
+	req->control_flags = CRQB_CNTRLFLAGS_PRDMODE;
+	req->control_flags |= iswrite ? 0 : CRQB_CNTRLFLAGS_DIR;
+	req->control_flags |=
+	    ((cfis->pm_port_c << CRQB_CNTRLFLAGS_PMPORTSHIFT)
+	     & CRQB_CNTRLFLAGS_PMPORTMASK);
+
+	req->drb_count = len;
+
+	req->ata_cmd_feat = (cfis->command << CRQB_CMDFEAT_CMDSHIFT) &
+		CRQB_CMDFEAT_CMDMASK;
+	req->ata_cmd_feat |= (cfis->features << CRQB_CMDFEAT_FEATSHIFT) &
+		CRQB_CMDFEAT_FEATMASK;
+
+	req->ata_addr = (cfis->lba_low << CRQB_ADDR_LBA_LOWSHIFT) &
+		CRQB_ADDR_LBA_LOWMASK;
+	req->ata_addr |= (cfis->lba_mid << CRQB_ADDR_LBA_MIDSHIFT) &
+		CRQB_ADDR_LBA_MIDMASK;
+	req->ata_addr |= (cfis->lba_high << CRQB_ADDR_LBA_HIGHSHIFT) &
+		CRQB_ADDR_LBA_HIGHMASK;
+	req->ata_addr |= (cfis->device << CRQB_ADDR_DEVICE_SHIFT) &
+		CRQB_ADDR_DEVICE_MASK;
+
+	req->ata_addr_exp = (cfis->lba_low_exp << CRQB_ADDR_LBA_LOW_EXP_SHIFT) &
+		CRQB_ADDR_LBA_LOW_EXP_MASK;
+	req->ata_addr_exp |=
+		(cfis->lba_mid_exp << CRQB_ADDR_LBA_MID_EXP_SHIFT) &
+		CRQB_ADDR_LBA_MID_EXP_MASK;
+	req->ata_addr_exp |=
+		(cfis->lba_high_exp << CRQB_ADDR_LBA_HIGH_EXP_SHIFT) &
+		CRQB_ADDR_LBA_HIGH_EXP_MASK;
+	req->ata_addr_exp |=
+		(cfis->features_exp << CRQB_ADDR_FEATURE_EXP_SHIFT) &
+		CRQB_ADDR_FEATURE_EXP_MASK;
+
+	req->ata_sect_count =
+		(cfis->sector_count << CRQB_SECTCOUNT_COUNT_SHIFT) &
+		CRQB_SECTCOUNT_COUNT_MASK;
+	req->ata_sect_count |=
+		(cfis->sector_count_exp << CRQB_SECTCOUNT_COUNT_EXP_SHIFT) &
+		CRQB_SECTCOUNT_COUNT_EXP_MASK;
+
+	/* Flush data */
+	flush_dcache_range((u32)req, (u32)req + sizeof(*req));
+
+	/* Trigger operation */
+	slot = get_next_reqip(port);
+	set_reqip(port, slot);
+
+	/* Wait for completion */
+	if (wait_dma_completion(port, slot, 10000)) {
+		printf("ATA operation timed out\n");
+		return -1;
+	}
+
+	process_responses(port);
+
+	/* Invalidate data on read */
+	if (buffer && len)
+		invalidate_dcache_range((u32)buffer, (u32)buffer + len);
+
+	return len;
+}
+
+static u32 mv_sata_rw_cmd_ext(int port, lbaint_t start, u32 blkcnt,
+			      u8 *buffer, int is_write)
+{
+	struct sata_fis_h2d cfis;
+	u32 res;
+	u64 block;
+
+	block = (u64)start;
+
+	memset(&cfis, 0, sizeof(struct sata_fis_h2d));
+
+	cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	cfis.command = (is_write) ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT;
+
+	cfis.lba_high_exp = (block >> 40) & 0xff;
+	cfis.lba_mid_exp = (block >> 32) & 0xff;
+	cfis.lba_low_exp = (block >> 24) & 0xff;
+	cfis.lba_high = (block >> 16) & 0xff;
+	cfis.lba_mid = (block >> 8) & 0xff;
+	cfis.lba_low = block & 0xff;
+	cfis.device = ATA_LBA;
+	cfis.sector_count_exp = (blkcnt >> 8) & 0xff;
+	cfis.sector_count = blkcnt & 0xff;
+
+	res = mv_ata_exec_ata_cmd(port, &cfis, buffer, ATA_SECT_SIZE * blkcnt,
+				  is_write);
+
+	return res >= 0 ? blkcnt : res;
+}
+
+static u32 mv_sata_rw_cmd(int port, lbaint_t start, u32 blkcnt, u8 *buffer,
+			  int is_write)
+{
+	struct sata_fis_h2d cfis;
+	lbaint_t block;
+	u32 res;
+
+	block = start;
+
+	memset(&cfis, 0, sizeof(struct sata_fis_h2d));
+
+	cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	cfis.command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ;
+	cfis.device = ATA_LBA;
+
+	cfis.device |= (block >> 24) & 0xf;
+	cfis.lba_high = (block >> 16) & 0xff;
+	cfis.lba_mid = (block >> 8) & 0xff;
+	cfis.lba_low = block & 0xff;
+	cfis.sector_count = (u8)(blkcnt & 0xff);
+
+	res = mv_ata_exec_ata_cmd(port, &cfis, buffer, ATA_SECT_SIZE * blkcnt,
+				  is_write);
+
+	return res >= 0 ? blkcnt : res;
+}
+
+static u32 ata_low_level_rw(int dev, lbaint_t blknr, lbaint_t blkcnt,
+			    void *buffer, int is_write)
+{
+	lbaint_t start, blks;
+	u8 *addr;
+	int max_blks;
+
+	debug("%s: %ld %ld\n", __func__, blknr, blkcnt);
+
+	start = blknr;
+	blks = blkcnt;
+	addr = (u8 *)buffer;
+
+	max_blks = MV_ATA_MAX_SECTORS;
+	do {
+		if (blks > max_blks) {
+			if (sata_dev_desc[dev].lba48) {
+				mv_sata_rw_cmd_ext(dev, start, max_blks, addr,
+						   is_write);
+			} else {
+				mv_sata_rw_cmd(dev, start, max_blks, addr,
+					       is_write);
+			}
+			start += max_blks;
+			blks -= max_blks;
+			addr += ATA_SECT_SIZE * max_blks;
+		} else {
+			if (sata_dev_desc[dev].lba48) {
+				mv_sata_rw_cmd_ext(dev, start, blks, addr,
+						   is_write);
+			} else {
+				mv_sata_rw_cmd(dev, start, blks, addr,
+					       is_write);
+			}
+			start += blks;
+			blks = 0;
+			addr += ATA_SECT_SIZE * blks;
+		}
+	} while (blks != 0);
+
+	return blkcnt;
+}
+
+static int mv_ata_exec_ata_cmd_nondma(int port,
+				      struct sata_fis_h2d *cfis, u8 *buffer,
+				      u32 len, u32 iswrite)
+{
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+	int i;
+	u16 *tp;
+
+	debug("%s\n", __func__);
+
+	out_le32(priv->regbase + PIO_SECTOR_COUNT, cfis->sector_count);
+	out_le32(priv->regbase + PIO_LBA_HI, cfis->lba_high);
+	out_le32(priv->regbase + PIO_LBA_MID, cfis->lba_mid);
+	out_le32(priv->regbase + PIO_LBA_LOW, cfis->lba_low);
+	out_le32(priv->regbase + PIO_ERR_FEATURES, cfis->features);
+	out_le32(priv->regbase + PIO_DEVICE, cfis->device);
+	out_le32(priv->regbase + PIO_CMD_STATUS, cfis->command);
+
+	if (ata_wait_register((u32 *)(priv->regbase + PIO_CMD_STATUS),
+			      ATA_BUSY, 0x0, 10000)) {
+		debug("Failed to wait for completion\n");
+		return -1;
+	}
+
+	if (len > 0) {
+		tp = (u16 *)buffer;
+		for (i = 0; i < len / 2; i++) {
+			if (iswrite)
+				out_le16(priv->regbase + PIO_DATA, *tp++);
+			else
+				*tp++ = in_le16(priv->regbase + PIO_DATA);
+		}
+	}
+
+	return len;
+}
+
+static int mv_sata_identify(int port, u16 *id)
+{
+	struct sata_fis_h2d h2d;
+
+	memset(&h2d, 0, sizeof(struct sata_fis_h2d));
+
+	h2d.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	h2d.command = ATA_CMD_ID_ATA;
+
+	/* Give device time to get operational */
+	mdelay(10);
+
+	return mv_ata_exec_ata_cmd_nondma(port, &h2d, (u8 *)id,
+					  ATA_ID_WORDS * 2, READ_CMD);
+}
+
+static void mv_sata_xfer_mode(int port, u16 *id)
+{
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+
+	priv->pio = id[ATA_ID_PIO_MODES];
+	priv->mwdma = id[ATA_ID_MWDMA_MODES];
+	priv->udma = id[ATA_ID_UDMA_MODES];
+	debug("pio %04x, mwdma %04x, udma %04x\n", priv->pio, priv->mwdma,
+	      priv->udma);
+}
+
+static void mv_sata_set_features(int port)
+{
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+	struct sata_fis_h2d cfis;
+	u8 udma_cap;
+
+	memset(&cfis, 0, sizeof(struct sata_fis_h2d));
+
+	cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	cfis.command = ATA_CMD_SET_FEATURES;
+	cfis.features = SETFEATURES_XFER;
+
+	/* First check the device capablity */
+	udma_cap = (u8) (priv->udma & 0xff);
+
+	if (udma_cap == ATA_UDMA6)
+		cfis.sector_count = XFER_UDMA_6;
+	if (udma_cap == ATA_UDMA5)
+		cfis.sector_count = XFER_UDMA_5;
+	if (udma_cap == ATA_UDMA4)
+		cfis.sector_count = XFER_UDMA_4;
+	if (udma_cap == ATA_UDMA3)
+		cfis.sector_count = XFER_UDMA_3;
+
+	mv_ata_exec_ata_cmd_nondma(port, &cfis, NULL, 0, READ_CMD);
+}
+
+int mv_sata_spin_down(int dev)
+{
+	struct sata_fis_h2d cfis;
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[dev].priv;
+
+	if (priv->link == 0) {
+		debug("No device on port: %d\n", dev);
+		return 1;
+	}
+
+	memset(&cfis, 0, sizeof(struct sata_fis_h2d));
+
+	cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	cfis.command = ATA_CMD_STANDBY;
+
+	return mv_ata_exec_ata_cmd_nondma(dev, &cfis, NULL, 0, READ_CMD);
+}
+
+int mv_sata_spin_up(int dev)
+{
+	struct sata_fis_h2d cfis;
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[dev].priv;
+
+	if (priv->link == 0) {
+		debug("No device on port: %d\n", dev);
+		return 1;
+	}
+
+	memset(&cfis, 0, sizeof(struct sata_fis_h2d));
+
+	cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	cfis.command = ATA_CMD_IDLE;
+
+	return mv_ata_exec_ata_cmd_nondma(dev, &cfis, NULL, 0, READ_CMD);
+}
+
+ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
+{
+	return ata_low_level_rw(dev, blknr, blkcnt, buffer, READ_CMD);
+}
+
+ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer)
+{
+	return ata_low_level_rw(dev, blknr, blkcnt, (void *)buffer, WRITE_CMD);
+}
+
+/*
+ * Initialize SATA memory windows
+ */
+static void mvsata_ide_conf_mbus_windows(void)
+{
+	const struct mbus_dram_target_info *dram;
+	int i;
+
+	dram = mvebu_mbus_dram_info();
+
+	/* Disable windows, Set Size/Base to 0  */
+	for (i = 0; i < 4; i++) {
+		writel(0, MVSATA_WIN_CONTROL(i));
+		writel(0, MVSATA_WIN_BASE(i));
+	}
+
+	for (i = 0; i < dram->num_cs; i++) {
+		const struct mbus_dram_window *cs = dram->cs + i;
+		writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
+		       (dram->mbus_dram_target_id << 4) | 1,
+		       MVSATA_WIN_CONTROL(i));
+		writel(cs->base & 0xffff0000, MVSATA_WIN_BASE(i));
+	}
+}
+
+int init_sata(int dev)
+{
+	struct mv_priv *priv;
+
+	debug("Initialize sata dev: %d\n", dev);
+
+	if (dev < 0 || dev >= CONFIG_SYS_SATA_MAX_DEVICE) {
+		printf("Invalid sata device %d\n", dev);
+		return -1;
+	}
+
+	priv = (struct mv_priv *)malloc(sizeof(struct mv_priv));
+	if (!priv) {
+		printf("Failed to allocate memory for private sata data\n");
+		return -ENOMEM;
+	}
+
+	memset((void *)priv, 0, sizeof(struct mv_priv));
+
+	/* Allocate and align request buffer */
+	priv->crqb_alloc = malloc(sizeof(struct crqb) * REQUEST_QUEUE_SIZE +
+				  CRQB_ALIGN);
+	if (!priv->crqb_alloc) {
+		printf("Unable to allocate memory for request queue\n");
+		return -ENOMEM;
+	}
+	memset(priv->crqb_alloc, 0,
+	       sizeof(struct crqb) * REQUEST_QUEUE_SIZE + CRQB_ALIGN);
+	priv->request = (struct crqb *)(((u32) priv->crqb_alloc + CRQB_ALIGN) &
+					~(CRQB_ALIGN - 1));
+
+	/* Allocate and align response buffer */
+	priv->crpb_alloc = malloc(sizeof(struct crpb) * REQUEST_QUEUE_SIZE +
+				  CRPB_ALIGN);
+	if (!priv->crpb_alloc) {
+		printf("Unable to allocate memory for response queue\n");
+		return -ENOMEM;
+	}
+	memset(priv->crpb_alloc, 0,
+	       sizeof(struct crpb) * REQUEST_QUEUE_SIZE + CRPB_ALIGN);
+	priv->response = (struct crpb *)(((u32) priv->crpb_alloc + CRPB_ALIGN) &
+					 ~(CRPB_ALIGN - 1));
+
+	sata_dev_desc[dev].priv = (void *)priv;
+
+	sprintf(priv->name, "SATA%d", dev);
+
+	priv->regbase = dev == 0 ? SATA0_BASE : SATA1_BASE;
+
+	if (!hw_init) {
+		debug("Initialize sata hw\n");
+		hw_init = 1;
+		mv_reset_one_hc();
+		mvsata_ide_conf_mbus_windows();
+	}
+
+	mv_reset_port(dev);
+
+	if (probe_port(dev)) {
+		priv->link = 0;
+		return -ENODEV;
+	}
+	priv->link = 1;
+
+	return 0;
+}
+
+int reset_sata(int dev)
+{
+	return 0;
+}
+
+int scan_sata(int port)
+{
+	unsigned char serial[ATA_ID_SERNO_LEN + 1];
+	unsigned char firmware[ATA_ID_FW_REV_LEN + 1];
+	unsigned char product[ATA_ID_PROD_LEN + 1];
+	u64 n_sectors;
+	u16 *id;
+	struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+
+	if (!priv->link)
+		return -ENODEV;
+
+	id = (u16 *)malloc(ATA_ID_WORDS * 2);
+	if (!id) {
+		printf("Failed to malloc id data\n");
+		return -ENOMEM;
+	}
+
+	mv_sata_identify(port, id);
+	ata_swap_buf_le16(id, ATA_ID_WORDS);
+#ifdef DEBUG
+	ata_dump_id(id);
+#endif
+
+	/* Serial number */
+	ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
+	memcpy(sata_dev_desc[port].product, serial, sizeof(serial));
+
+	/* Firmware version */
+	ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
+	memcpy(sata_dev_desc[port].revision, firmware, sizeof(firmware));
+
+	/* Product model */
+	ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
+	memcpy(sata_dev_desc[port].vendor, product, sizeof(product));
+
+	/* Total sectors */
+	n_sectors = ata_id_n_sectors(id);
+	sata_dev_desc[port].lba = n_sectors;
+
+	/* Check if support LBA48 */
+	if (ata_id_has_lba48(id)) {
+		sata_dev_desc[port].lba48 = 1;
+		debug("Device support LBA48\n");
+	}
+
+	/* Get the NCQ queue depth from device */
+	priv->queue_depth = ata_id_queue_depth(id);
+
+	/* Get the xfer mode from device */
+	mv_sata_xfer_mode(port, id);
+
+	/* Set the xfer mode to highest speed */
+	mv_sata_set_features(port);
+
+	/* Start up */
+	mv_start_edma_engine(port);
+
+	return 0;
+}