summaryrefslogtreecommitdiff
path: root/drivers/block
diff options
context:
space:
mode:
authorMarc Jones <marc.jones@chromium.org>2012-10-29 05:24:01 +0000
committerTom Rini <trini@ti.com>2012-11-02 15:20:43 -0700
commit2a0c61d401732a2c21b0dc7fe6d1aeec79da8c05 (patch)
treee350c6aa8667d2477a1720d0e33a07b73de690be /drivers/block
parent57847660bb9ddba1d4bc9c1dc551730f71c097a7 (diff)
downloadu-boot-imx-2a0c61d401732a2c21b0dc7fe6d1aeec79da8c05.zip
u-boot-imx-2a0c61d401732a2c21b0dc7fe6d1aeec79da8c05.tar.gz
u-boot-imx-2a0c61d401732a2c21b0dc7fe6d1aeec79da8c05.tar.bz2
ahci: Support spin-up and link-up separately
Add HDD handling to the SSD-only AHCI driver, by separately dealing with spin-up and link-up. Signed-off-by: Marc Jones <marc.jones@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'drivers/block')
-rw-r--r--drivers/block/ahci.c45
1 files changed, 39 insertions, 6 deletions
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 719574f..19c5f13 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -53,6 +53,7 @@ hd_driveid_t *ataid[AHCI_MAX_PORTS];
#endif
/* Maximum timeouts for each event */
+#define WAIT_MS_SPINUP 10000
#define WAIT_MS_DATAIO 5000
#define WAIT_MS_LINKUP 4
@@ -129,7 +130,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
unsigned short vendor;
#endif
volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
- u32 tmp, cap_save;
+ u32 tmp, cap_save, cmd;
int i, j;
volatile u8 *port_mmio;
@@ -137,7 +138,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
cap_save = readl(mmio + HOST_CAP);
cap_save &= ((1 << 28) | (1 << 17));
- cap_save |= (1 << 27);
+ cap_save |= (1 << 27); /* Staggered Spin-up. Not needed. */
/* global controller reset */
tmp = readl(mmio + HOST_CTL);
@@ -201,9 +202,18 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
msleep(500);
}
- debug("Spinning up port %d... ", i);
- writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD);
-
+ /* Add the spinup command to whatever mode bits may
+ * already be on in the command register.
+ */
+ cmd = readl(port_mmio + PORT_CMD);
+ cmd |= PORT_CMD_FIS_RX;
+ cmd |= PORT_CMD_SPIN_UP;
+ writel_with_flush(cmd, port_mmio + PORT_CMD);
+
+ /* Bring up SATA link.
+ * SATA link bringup time is usually less than 1 ms; only very
+ * rarely has it taken between 1-2 ms. Never seen it above 2 ms.
+ */
j = 0;
while (j < WAIT_MS_LINKUP) {
tmp = readl(port_mmio + PORT_SCR_STAT);
@@ -212,7 +222,30 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
udelay(1000);
j++;
}
- if (j == WAIT_MS_LINKUP)
+ if (j == WAIT_MS_LINKUP) {
+ printf("SATA link %d timeout.\n", i);
+ continue;
+ } else {
+ debug("SATA link ok.\n");
+ }
+
+ /* Clear error status */
+ tmp = readl(port_mmio + PORT_SCR_ERR);
+ if (tmp)
+ writel(tmp, port_mmio + PORT_SCR_ERR);
+
+ debug("Spinning up device on SATA port %d... ", i);
+
+ j = 0;
+ while (j < WAIT_MS_SPINUP) {
+ tmp = readl(port_mmio + PORT_TFDATA);
+ if (!(tmp & (ATA_STAT_BUSY | ATA_STAT_DRQ)))
+ break;
+ udelay(1000);
+ j++;
+ }
+ printf("Target spinup took %d ms.\n", j);
+ if (j == WAIT_MS_SPINUP)
debug("timeout.\n");
else
debug("ok.\n");