summaryrefslogtreecommitdiff
path: root/drivers/block/fsl_sata.c
diff options
context:
space:
mode:
authorDave Liu <daveliu@freescale.com>2010-04-12 14:23:25 +0800
committerKumar Gala <galak@kernel.crashing.org>2010-04-26 22:37:54 -0500
commite4773debb735323a9eedf353239e8e88e03d7c58 (patch)
tree3369f186c8ee74fa3e6bcc1e8abcddfc593bb17c /drivers/block/fsl_sata.c
parent99bac479dd183529f4e259a0de8d31644219d487 (diff)
downloadu-boot-imx-e4773debb735323a9eedf353239e8e88e03d7c58.zip
u-boot-imx-e4773debb735323a9eedf353239e8e88e03d7c58.tar.gz
u-boot-imx-e4773debb735323a9eedf353239e8e88e03d7c58.tar.bz2
fsl_sata: Add the workaround for errata SATA-A001
After power on, the SATA host controller of P1022 Rev1 is configured in legacy mode instead of the expected enterprise mode. Software needs to clear bit[28] of HControl register to change to enterprise mode after bringing the host offline. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'drivers/block/fsl_sata.c')
-rw-r--r--drivers/block/fsl_sata.c22
1 files changed, 22 insertions, 0 deletions
diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c
index abcda6f..8878560 100644
--- a/drivers/block/fsl_sata.c
+++ b/drivers/block/fsl_sata.c
@@ -21,6 +21,7 @@
#include <common.h>
#include <command.h>
#include <asm/io.h>
+#include <asm/processor.h>
#include <malloc.h>
#include <libata.h>
#include <fis.h>
@@ -191,6 +192,27 @@ int init_sata(int dev)
/* Wait the controller offline */
ata_wait_register(&reg->hstatus, HSTATUS_ONOFF, 0, 1000);
+#if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
+ /*
+ * For P1022/1013 Rev1.0 silicon, after power on SATA host
+ * controller is configured in legacy mode instead of the
+ * expected enterprise mode. software needs to clear bit[28]
+ * of HControl register to change to enterprise mode from
+ * legacy mode.
+ */
+ {
+ u32 svr = get_svr();
+ if (IS_SVR_REV(svr, 1, 0) &&
+ ((SVR_SOC_VER(svr) == SVR_P1022) ||
+ (SVR_SOC_VER(svr) == SVR_P1022_E) ||
+ (SVR_SOC_VER(svr) == SVR_P1013) ||
+ (SVR_SOC_VER(svr) == SVR_P1013_E))) {
+ out_le32(&reg->hstatus, 0x20000000);
+ out_le32(&reg->hcontrol, 0x00000100);
+ }
+ }
+#endif
+
/* Set the command header base address to CHBA register to tell DMA */
out_le32(&reg->chba, (u32)cmd_hdr & ~0x3);