Cleanup and lindent new AHCI driver.

1 files changed, 138 insertions, 142 deletions

diff --git a/drivers/ahci.c b/drivers/ahci.c
index 828498d..8ceff00 100644
--- a/drivers/ahci.c
+++ b/drivers/ahci.c
@@ -42,7 +42,8 @@
 struct ahci_probe_ent *probe_ent = NULL;
 hd_driveid_t *ataid[AHCI_MAX_PORTS];
 
-#define writel_with_flush(a,b)	do{writel(a,b);readl(b);}while(0)
+#define writel_with_flush(a,b)	do { writel(a,b); readl(b); } while (0)
+
 
 static inline u32 ahci_port_base(u32 base, u32 port)
 {
@@ -55,21 +56,25 @@ static void ahci_setup_port(struct ahci_ioports *port, unsigned long base,
 {
 	base = ahci_port_base(base, port_idx);
 
-	port->cmd_addr	= base;
-	port->scr_addr	= base + PORT_SCR;
+	port->cmd_addr = base;
+	port->scr_addr = base + PORT_SCR;
 }
 
 
 #define msleep(a) udelay(a * 1000)
 #define ssleep(a) msleep(a * 1000)
-static int waiting_for_cmd_completed(volatile u8 *offset, int timeout_msec, u32 sign)
+
+static int waiting_for_cmd_completed(volatile u8 *offset,
+				     int timeout_msec,
+				     u32 sign)
 {
 	int i;
 	u32 status;
-	for(i = 0; ((status = readl(offset)) & sign) && i < timeout_msec; i++)
+
+	for (i = 0; ((status = readl(offset)) & sign) && i < timeout_msec; i++)
 		msleep(1);
 
-	return (i < timeout_msec)? 0 : -1;
+	return (i < timeout_msec) ? 0 : -1;
 }
 
 
@@ -80,11 +85,11 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
 	u32 tmp, cap_save;
 	u16 tmp16;
 	int i, j;
-	volatile u8* port_mmio;
+	volatile u8 *port_mmio;
 	unsigned short vendor;
 
 	cap_save = readl(mmio + HOST_CAP);
-	cap_save &= ( (1<<28) | (1<<17) );
+	cap_save &= ((1 << 28) | (1 << 17));
 	cap_save |= (1 << 27);
 
 	/* global controller reset */
@@ -121,13 +126,12 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
 	probe_ent->n_ports = (probe_ent->cap & 0x1f) + 1;
 
 	debug("cap 0x%x  port_map 0x%x  n_ports %d\n",
-		probe_ent->cap, probe_ent->port_map, probe_ent->n_ports);
+	      probe_ent->cap, probe_ent->port_map, probe_ent->n_ports);
 
 	for (i = 0; i < probe_ent->n_ports; i++) {
-		probe_ent->port[i].port_mmio = ahci_port_base((u32)mmio, i);
-		port_mmio = (u8 *)probe_ent->port[i].port_mmio;
-		ahci_setup_port(&probe_ent->port[i],
-				(unsigned long) mmio, i);
+		probe_ent->port[i].port_mmio = ahci_port_base((u32) mmio, i);
+		port_mmio = (u8 *) probe_ent->port[i].port_mmio;
+		ahci_setup_port(&probe_ent->port[i], (unsigned long)mmio, i);
 
 		/* make sure port is not active */
 		tmp = readl(port_mmio + PORT_CMD);
@@ -169,11 +173,11 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
 		/* set irq mask (enables interrupts) */
 		writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
 
-		/*register linkup ports*/
+		/*register linkup ports */
 		tmp = readl(port_mmio + PORT_SCR_STAT);
-		debug("Port %d status: 0x%x\n",i,tmp);
-		if((tmp & 0xf) == 0x03)
-			probe_ent->link_port_map |= (0x01<< i);
+		debug("Port %d status: 0x%x\n", i, tmp);
+		if ((tmp & 0xf) == 0x03)
+			probe_ent->link_port_map |= (0x01 << i);
 	}
 
 	tmp = readl(mmio + HOST_CTL);
@@ -193,7 +197,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
 static void ahci_print_info(struct ahci_probe_ent *probe_ent)
 {
 	pci_dev_t pdev = probe_ent->dev;
-	volatile u8* mmio = (volatile u8 *)probe_ent->mmio_base;
+	volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
 	u32 vers, cap, impl, speed;
 	const char *speed_s;
 	u16 cc;
@@ -221,50 +225,38 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent)
 	else
 		scc_s = "unknown";
 
-	printf(	"AHCI %02x%02x.%02x%02x "
-		"%u slots %u ports %s Gbps 0x%x impl %s mode\n"
-	       	,
-
-	       	(vers >> 24) & 0xff,
-	       	(vers >> 16) & 0xff,
-	       	(vers >> 8) & 0xff,
-	       	vers & 0xff,
-
-		((cap >> 8) & 0x1f) + 1,
-		(cap & 0x1f) + 1,
-		speed_s,
-		impl,
-		scc_s);
+	printf("AHCI %02x%02x.%02x%02x "
+	       "%u slots %u ports %s Gbps 0x%x impl %s mode\n",
+	       (vers >> 24) & 0xff,
+	       (vers >> 16) & 0xff,
+	       (vers >> 8) & 0xff,
+	       vers & 0xff,
+	       ((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s);
 
 	printf("flags: "
-	       	"%s%s%s%s%s%s"
-	       	"%s%s%s%s%s%s%s\n"
-	       	,
-
-		cap & (1 << 31) ? "64bit " : "",
-		cap & (1 << 30) ? "ncq " : "",
-		cap & (1 << 28) ? "ilck " : "",
-		cap & (1 << 27) ? "stag " : "",
-		cap & (1 << 26) ? "pm " : "",
-		cap & (1 << 25) ? "led " : "",
-
-		cap & (1 << 24) ? "clo " : "",
-		cap & (1 << 19) ? "nz " : "",
-		cap & (1 << 18) ? "only " : "",
-		cap & (1 << 17) ? "pmp " : "",
-		cap & (1 << 15) ? "pio " : "",
-		cap & (1 << 14) ? "slum " : "",
-		cap & (1 << 13) ? "part " : ""
-		);
+	       "%s%s%s%s%s%s"
+	       "%s%s%s%s%s%s%s\n",
+	       cap & (1 << 31) ? "64bit " : "",
+	       cap & (1 << 30) ? "ncq " : "",
+	       cap & (1 << 28) ? "ilck " : "",
+	       cap & (1 << 27) ? "stag " : "",
+	       cap & (1 << 26) ? "pm " : "",
+	       cap & (1 << 25) ? "led " : "",
+	       cap & (1 << 24) ? "clo " : "",
+	       cap & (1 << 19) ? "nz " : "",
+	       cap & (1 << 18) ? "only " : "",
+	       cap & (1 << 17) ? "pmp " : "",
+	       cap & (1 << 15) ? "pio " : "",
+	       cap & (1 << 14) ? "slum " : "",
+	       cap & (1 << 13) ? "part " : "");
 }
 
-
-static int ahci_init_one (pci_dev_t pdev)
+static int ahci_init_one(pci_dev_t pdev)
 {
 	u32 iobase, vendor;
 	int rc;
 
-	memset((void *)ataid, 0,  sizeof(hd_driveid_t *) * AHCI_MAX_PORTS);
+	memset((void *)ataid, 0, sizeof(hd_driveid_t *) * AHCI_MAX_PORTS);
 
 	probe_ent = malloc(sizeof(probe_ent));
 	memset(probe_ent, 0, sizeof(probe_ent));
@@ -273,20 +265,22 @@ static int ahci_init_one (pci_dev_t pdev)
 	pci_read_config_dword(pdev, AHCI_PCI_BAR, &iobase);
 	iobase &= ~0xf;
 
-	probe_ent->host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY
-				  | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA
-				  | ATA_FLAG_NO_ATAPI;
-	probe_ent->pio_mask	= 0x1f;
-	probe_ent->udma_mask	= 0x7f; /*Fixme,assume to support UDMA6*/
+	probe_ent->host_flags = ATA_FLAG_SATA
+				| ATA_FLAG_NO_LEGACY
+				| ATA_FLAG_MMIO
+				| ATA_FLAG_PIO_DMA
+				| ATA_FLAG_NO_ATAPI;
+	probe_ent->pio_mask = 0x1f;
+	probe_ent->udma_mask = 0x7f;	/*Fixme,assume to support UDMA6 */
 
-	probe_ent->mmio_base	= iobase;
+	probe_ent->mmio_base = iobase;
 
 	/* Take from kernel:
 	 * JMicron-specific fixup:
 	 * make sure we're in AHCI mode
 	 */
 	pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
-	if(vendor ==  0x197b)
+	if (vendor == 0x197b)
 		pci_write_config_byte(pdev, 0x41, 0xa1);
 
 	/* initialize adapter */
@@ -298,34 +292,34 @@ static int ahci_init_one (pci_dev_t pdev)
 
 	return 0;
 
-err_out:
+      err_out:
 	return rc;
 }
 
 
 #define MAX_DATA_BYTE_COUNT  (4*1024*1024)
+
 static int ahci_fill_sg(u8 port, unsigned char *buf, int buf_len)
 {
-
 	struct ahci_ioports *pp = &(probe_ent->port[port]);
 	struct ahci_sg *ahci_sg = pp->cmd_tbl_sg;
 	u32 sg_count;
 	int i;
 
 	sg_count = ((buf_len - 1) / MAX_DATA_BYTE_COUNT) + 1;
-	if(sg_count > AHCI_MAX_SG){
+	if (sg_count > AHCI_MAX_SG) {
 		printf("Error:Too much sg!\n");
 		return -1;
 	}
 
-	for(i = 0;i < sg_count; i++)
-	{
-		ahci_sg->addr = cpu_to_le32((u32)buf + i * MAX_DATA_BYTE_COUNT);
+	for (i = 0; i < sg_count; i++) {
+		ahci_sg->addr =
+		    cpu_to_le32((u32) buf + i * MAX_DATA_BYTE_COUNT);
 		ahci_sg->addr_hi = 0;
-		ahci_sg->flags_size = cpu_to_le32( 0x3fffff &
-				(buf_len < MAX_DATA_BYTE_COUNT
-				? (buf_len - 1)
-				: (MAX_DATA_BYTE_COUNT - 1)));
+		ahci_sg->flags_size = cpu_to_le32(0x3fffff &
+					  (buf_len < MAX_DATA_BYTE_COUNT
+					   ? (buf_len - 1)
+					   : (MAX_DATA_BYTE_COUNT - 1)));
 		ahci_sg++;
 		buf_len -= MAX_DATA_BYTE_COUNT;
 	}
@@ -345,26 +339,25 @@ static void ahci_fill_cmd_slot(struct ahci_ioports *pp, u32 opts)
 
 static void ahci_set_feature(u8 port)
 {
-
 	struct ahci_ioports *pp = &(probe_ent->port[port]);
-	volatile u8* port_mmio = (volatile u8 *)pp->port_mmio;
-	u32 cmd_fis_len = 5; /* five dwords */
+	volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
+	u32 cmd_fis_len = 5;	/* five dwords */
 	u8 fis[20];
 
-	/*set feature*/
-	memset(fis,0,20);
+	/*set feature */
+	memset(fis, 0, 20);
 	fis[0] = 0x27;
 	fis[1] = 1 << 7;
 	fis[2] = ATA_CMD_SETF;
 	fis[3] = SETFEATURES_XFER;
 	fis[12] = __ilog2(probe_ent->udma_mask + 1) + 0x40 - 0x01;
 
-	memcpy((unsigned char *)pp->cmd_tbl,fis,20);
+	memcpy((unsigned char *)pp->cmd_tbl, fis, 20);
 	ahci_fill_cmd_slot(pp, cmd_fis_len);
 	writel(1, port_mmio + PORT_CMD_ISSUE);
 	readl(port_mmio + PORT_CMD_ISSUE);
 
-	if(waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) {
+	if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) {
 		printf("set feature error!\n");
 	}
 }
@@ -372,94 +365,94 @@ static void ahci_set_feature(u8 port)
 
 static int ahci_port_start(u8 port)
 {
-
 	struct ahci_ioports *pp = &(probe_ent->port[port]);
-	volatile u8* port_mmio = (volatile u8 *)pp->port_mmio;
+	volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
 	u32 port_status;
 	u32 mem;
 
-	debug("Enter start port: %d\n",port);
+	debug("Enter start port: %d\n", port);
 	port_status = readl(port_mmio + PORT_SCR_STAT);
-	debug("Port %d status: %x\n",port,port_status);
-	if((port_status & 0xf) != 0x03){
+	debug("Port %d status: %x\n", port, port_status);
+	if ((port_status & 0xf) != 0x03) {
 		printf("No Link on this port!\n");
 		return -1;
 	}
 
-	mem = (u32)malloc(AHCI_PORT_PRIV_DMA_SZ + 2048);
+	mem = (u32) malloc(AHCI_PORT_PRIV_DMA_SZ + 2048);
 	if (!mem) {
 		free(pp);
 		printf("No mem for table!\n");
 		return -ENOMEM;
 	}
 
-	mem = (mem + 0x800) & (~0x7ff); /* Aligned to 2048-bytes */
+	mem = (mem + 0x800) & (~0x7ff);	/* Aligned to 2048-bytes */
+	memset((u8 *) mem, 0, AHCI_PORT_PRIV_DMA_SZ);
 
-	memset((u8 *)mem, 0, AHCI_PORT_PRIV_DMA_SZ);
 	/*
 	 * First item in chunk of DMA memory: 32-slot command table,
 	 * 32 bytes each in size
 	 */
 	pp->cmd_slot = (struct ahci_cmd_hdr *)mem;
-	debug("cmd_slot = 0x%x\n",pp->cmd_slot);
-
+	debug("cmd_slot = 0x%x\n", pp->cmd_slot);
 	mem += (AHCI_CMD_SLOT_SZ + 224);
+
 	/*
 	 * Second item: Received-FIS area
 	 */
 	pp->rx_fis = mem;
-
 	mem += AHCI_RX_FIS_SZ;
+
 	/*
 	 * Third item: data area for storing a single command
 	 * and its scatter-gather table
 	 */
 	pp->cmd_tbl = mem;
-	debug("cmd_tbl_dma = 0x%x\n",pp->cmd_tbl);
+	debug("cmd_tbl_dma = 0x%x\n", pp->cmd_tbl);
 
 	mem += AHCI_CMD_TBL_HDR;
 	pp->cmd_tbl_sg = (struct ahci_sg *)mem;
 
-	writel_with_flush((u32)pp->cmd_slot, port_mmio + PORT_LST_ADDR);
+	writel_with_flush((u32) pp->cmd_slot, port_mmio + PORT_LST_ADDR);
 
 	writel_with_flush(pp->rx_fis, port_mmio + PORT_FIS_ADDR);
 
 	writel_with_flush(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX |
-	       PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
-	       PORT_CMD_START, port_mmio + PORT_CMD);
+			  PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
+			  PORT_CMD_START, port_mmio + PORT_CMD);
 
-	debug("Exit start port %d\n",port);
+	debug("Exit start port %d\n", port);
 
 	return 0;
 }
 
 
-static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf, int buf_len)
+static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf,
+				int buf_len)
 {
 
-	struct ahci_ioports *pp =  &(probe_ent->port[port]);
-	volatile u8* port_mmio = (volatile u8 *)pp->port_mmio;
+	struct ahci_ioports *pp = &(probe_ent->port[port]);
+	volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
 	u32 opts;
 	u32 port_status;
 	int sg_count;
 
-	debug("Enter get_ahci_device_data: for port %d\n",port);
+	debug("Enter get_ahci_device_data: for port %d\n", port);
 
-	if(port > probe_ent->n_ports){
+	if (port > probe_ent->n_ports) {
 		printf("Invaild port number %d\n", port);
 		return -1;
 	}
 
 	port_status = readl(port_mmio + PORT_SCR_STAT);
-	if((port_status & 0xf) != 0x03){
-		debug("No Link on port %d!\n",port);
+	if ((port_status & 0xf) != 0x03) {
+		debug("No Link on port %d!\n", port);
 		return -1;
 	}
 
 	memcpy((unsigned char *)pp->cmd_tbl, fis, fis_len);
 
-	sg_count = ahci_fill_sg(port,buf,buf_len);
-	opts = (fis_len >> 2) | (sg_count << 16) ;
+	sg_count = ahci_fill_sg(port, buf, buf_len);
+	opts = (fis_len >> 2) | (sg_count << 16);
 	ahci_fill_cmd_slot(pp, opts);
 
 	writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
@@ -469,7 +462,7 @@ static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf, int buf_
 		return -1;
 	}
 	debug("get_ahci_device_data: %d byte transferred.\n",
-			pp->cmd_slot->status);
+	      pp->cmd_slot->status);
 
 	return 0;
 }
@@ -478,7 +471,7 @@ static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf, int buf_
 static char *ata_id_strcpy(u16 *target, u16 *src, int len)
 {
 	int i;
-	for(i = 0; i < len / 2; i++)
+	for (i = 0; i < len / 2; i++)
 		target[i] = le16_to_cpu(src[i]);
 	return (char *)target;
 }
@@ -503,6 +496,7 @@ static void dump_ataid(hd_driveid_t *ataid)
 	debug("(93)ataid->hw_config = 0x%x\n", ataid->hw_config);
 }
 
+
 /*
  * SCSI INQUIRY command operation.
  */
@@ -511,7 +505,7 @@ static int ata_scsiop_inquiry(ccb *pccb)
 	u8 hdr[] = {
 		0,
 		0,
-		0x5,	/* claim SPC-3 version compatibility */
+		0x5,		/* claim SPC-3 version compatibility */
 		2,
 		95 - 4,
 	};
@@ -524,33 +518,33 @@ static int ata_scsiop_inquiry(ccb *pccb)
 
 	memcpy(pccb->pdata, hdr, sizeof(hdr));
 
-	if(pccb->datalen <= 35)
+	if (pccb->datalen <= 35)
 		return 0;
 
 	memset(fis, 0, 20);
 	/* Construct the FIS */
-	fis[0] = 0x27;			/* Host to device FIS. */
-	fis[1] = 1 << 7;		/* Command FIS. */
-	fis[2] = ATA_CMD_IDENT;		/* Command byte. */
+	fis[0] = 0x27;		/* Host to device FIS. */
+	fis[1] = 1 << 7;	/* Command FIS. */
+	fis[2] = ATA_CMD_IDENT;	/* Command byte. */
 
 	/* Read id from sata */
 	port = pccb->target;
-	if(!(tmpid = malloc(sizeof(hd_driveid_t))))
+	if (!(tmpid = malloc(sizeof(hd_driveid_t))))
 		return -ENOMEM;
 
-	if(get_ahci_device_data(port, (u8 *)&fis, 20,
-			tmpid, sizeof(hd_driveid_t))){
+	if (get_ahci_device_data(port, (u8 *) & fis, 20,
+				 tmpid, sizeof(hd_driveid_t))) {
 		debug("scsi_ahci: SCSI inquiry command failure.\n");
 		return -EIO;
 	}
 
-	if(ataid[port])
+	if (ataid[port])
 		free(ataid[port]);
-	ataid[port] = (hd_driveid_t *)tmpid;
+	ataid[port] = (hd_driveid_t *) tmpid;
 
 	memcpy(&pccb->pdata[8], "ATA     ", 8);
-	ata_id_strcpy((u16 *)&pccb->pdata[16], (u16 *)ataid[port]->model, 16);
-	ata_id_strcpy((u16 *)&pccb->pdata[32], (u16 *)ataid[port]->fw_rev, 4);
+	ata_id_strcpy((u16 *) &pccb->pdata[16], (u16 *)ataid[port]->model, 16);
+	ata_id_strcpy((u16 *) &pccb->pdata[32], (u16 *)ataid[port]->fw_rev, 4);
 
 	dump_ataid(ataid[port]);
 	return 0;
@@ -560,15 +554,15 @@ static int ata_scsiop_inquiry(ccb *pccb)
 /*
  * SCSI READ10 command operation.
  */
-static int ata_scsiop_read10(ccb *pccb)
+static int ata_scsiop_read10(ccb * pccb)
 {
 	u64 lba = 0;
 	u32 len = 0;
 	u8 fis[20];
 
-	lba = (((u64)pccb->cmd[2]) << 24) | (((u64)pccb->cmd[3]) << 16)
-		| (((u64)pccb->cmd[4]) << 8) | ((u64)pccb->cmd[5]);
-	len = (((u32)pccb->cmd[7]) << 8) | ((u32)pccb->cmd[8]);
+	lba = (((u64) pccb->cmd[2]) << 24) | (((u64) pccb->cmd[3]) << 16)
+	    | (((u64) pccb->cmd[4]) << 8) | ((u64) pccb->cmd[5]);
+	len = (((u32) pccb->cmd[7]) << 8) | ((u32) pccb->cmd[8]);
 
 	/* For 10-byte and 16-byte SCSI R/W commands, transfer
 	 * length 0 means transfer 0 block of data.
@@ -577,15 +571,16 @@ static int ata_scsiop_read10(ccb *pccb)
 	 *
 	 * WARNING: one or two older ATA drives treat 0 as 0...
 	 */
-	if(!len) return 0;
+	if (!len)
+		return 0;
 	memset(fis, 0, 20);
 
 	/* Construct the FIS */
-	fis[0] = 0x27;			/* Host to device FIS. */
-	fis[1] = 1 << 7;		/* Command FIS. */
+	fis[0] = 0x27;		/* Host to device FIS. */
+	fis[1] = 1 << 7;	/* Command FIS. */
 	fis[2] = ATA_CMD_RD_DMA;	/* Command byte. */
 
-	/* LBA address, only support LBA28 in this driver*/
+	/* LBA address, only support LBA28 in this driver */
 	fis[4] = pccb->cmd[5];
 	fis[5] = pccb->cmd[4];
 	fis[6] = pccb->cmd[3];
@@ -596,8 +591,8 @@ static int ata_scsiop_read10(ccb *pccb)
 	fis[13] = pccb->cmd[7];
 
 	/* Read from ahci */
-	if(get_ahci_device_data(pccb->target, (u8*)&fis, 20,
-				pccb->pdata, pccb->datalen)){
+	if (get_ahci_device_data(pccb->target, (u8 *) & fis, 20,
+				 pccb->pdata, pccb->datalen)) {
 		debug("scsi_ahci: SCSI READ10 command failure.\n");
 		return -EIO;
 	}
@@ -613,16 +608,16 @@ static int ata_scsiop_read_capacity10(ccb *pccb)
 {
 	u8 buf[8];
 
-	if(!ataid[pccb->target]) {
+	if (!ataid[pccb->target]) {
 		printf("scsi_ahci: SCSI READ CAPACITY10 command failure. "
-			"\tNo ATA info!\n"
-			"\tPlease run SCSI commmand INQUIRY firstly!\n");
+		       "\tNo ATA info!\n"
+		       "\tPlease run SCSI commmand INQUIRY firstly!\n");
 		return -EPERM;
 	}
 
 	memset(buf, 0, 8);
 
-	*(u32 *)buf = le32_to_cpu(ataid[pccb->target]->lba_capacity);
+	*(u32 *) buf = le32_to_cpu(ataid[pccb->target]->lba_capacity);
 
 	buf[6] = 512 >> 8;
 	buf[7] = 512 & 0xff;
@@ -641,11 +636,12 @@ static int ata_scsiop_test_unit_ready(ccb *pccb)
 	return (ataid[pccb->target]) ? 0 : -EPERM;
 }
 
+
 int scsi_exec(ccb *pccb)
 {
 	int ret;
 
-	switch(pccb->cmd[0]) {
+	switch (pccb->cmd[0]) {
 	case SCSI_READ10:
 		ret = ata_scsiop_read10(pccb);
 		break;
@@ -663,8 +659,8 @@ int scsi_exec(ccb *pccb)
 		return FALSE;
 	}
 
-	if(ret) {
-		debug("SCSI command 0x%02x ret errno %d\n", pccb->cmd[0],ret);
+	if (ret) {
+		debug("SCSI command 0x%02x ret errno %d\n", pccb->cmd[0], ret);
 		return FALSE;
 	}
 	return TRUE;
@@ -681,13 +677,13 @@ void scsi_low_level_init(int busdevfunc)
 
 	linkmap = probe_ent->link_port_map;
 
-	for(i = 0; i < CFG_SCSI_MAX_SCSI_ID; i++){
-		if( ((linkmap >> i) & 0x01) ){
-			if(ahci_port_start((u8)i)){
-				printf("Can not start port %d\n",i);
+	for (i = 0; i < CFG_SCSI_MAX_SCSI_ID; i++) {
+		if (((linkmap >> i) & 0x01)) {
+			if (ahci_port_start((u8) i)) {
+				printf("Can not start port %d\n", i);
 				continue;
 			}
-			ahci_set_feature((u8)i);
+			ahci_set_feature((u8) i);
 		}
 	}
 }
@@ -695,12 +691,12 @@ void scsi_low_level_init(int busdevfunc)
 
 void scsi_bus_reset(void)
 {
-/*Not implement*/
+	/*Not implement*/
 }
 
 
-void scsi_print_error(ccb *pccb)
+void scsi_print_error(ccb * pccb)
 {
-/*The ahci error info can be read in the ahci driver*/
+	/*The ahci error info can be read in the ahci driver*/
 }
 #endif