drivers/net : move net drivers to drivers/net

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 0 insertions, 519 deletions

diff --git a/drivers/3c589.c b/drivers/3c589.c
deleted file mode 100644
index 080b686..0000000
--- a/drivers/3c589.c
+++ /dev/null
@@ -1,519 +0,0 @@
-/*------------------------------------------------------------------------
- . 3c589.c
- . This is a driver for 3Com's 3C589 (Etherlink III) PCMCIA Ethernet device.
- .
- . (C) Copyright 2002
- . Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- . Rolf Offermanns <rof@sysgo.de>
- .
- . This program is free software; you can redistribute it and/or modify
- . it under the terms of the GNU General Public License as published by
- . the Free Software Foundation; either version 2 of the License, or
- . (at your option) any later version.
- .
- . This program is distributed in the hope that it will be useful,
- . but WITHOUT ANY WARRANTY; without even the implied warranty of
- . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- . GNU General Public License for more details.
- .
- . You should have received a copy of the GNU General Public License
- . along with this program; if not, write to the Free Software
- . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- .
- ----------------------------------------------------------------------------*/
-
-#include <common.h>
-#include <command.h>
-#include <net.h>
-
-#ifdef CONFIG_DRIVER_3C589
-
-#include "3c589.h"
-
-
-/* Use power-down feature of the chip */
-#define POWER_DOWN	0
-
-#define NO_AUTOPROBE
-
-static const char version[] =
-	"Your ad here! :P\n";
-
-
-#undef EL_DEBUG
-
-typedef unsigned char byte;
-typedef unsigned short word;
-typedef unsigned long int dword;
-/*------------------------------------------------------------------------
- .
- . Configuration options, for the experienced user to change.
- .
- -------------------------------------------------------------------------*/
-
-/*
- . Wait time for memory to be free.  This probably shouldn't be
- . tuned that much, as waiting for this means nothing else happens
- . in the system
-*/
-#define MEMORY_WAIT_TIME 16
-
-
-#if (EL_DEBUG > 2 )
-#define PRINTK3(args...) printf(args)
-#else
-#define PRINTK3(args...)
-#endif
-
-#if EL_DEBUG > 1
-#define PRINTK2(args...) printf(args)
-#else
-#define PRINTK2(args...)
-#endif
-
-#ifdef EL_DEBUG
-#define PRINTK(args...) printf(args)
-#else
-#define PRINTK(args...)
-#endif
-
-#define outb(args...)	mmio_outb(args)
-#define mmio_outb(value, addr)	(*((volatile byte *)(addr)) = value)
-
-#define inb(args...)	mmio_inb(args)
-#define mmio_inb(addr) (*((volatile byte *)(addr)))
-
-#define outw(args...)	mmio_outw(args)
-#define mmio_outw(value, addr)	(*((volatile word *)(addr)) = value)
-
-#define inw(args...)	mmio_inw(args)
-#define mmio_inw(addr) (*((volatile word *)(addr)))
-
-#define outsw(args...)	mmio_outsw(args)
-#define mmio_outsw(r,b,l)	({	int __i; \
-					word *__b2; \
-					__b2 = (word *) b; \
-					for (__i = 0; __i < l; __i++) { \
-					    mmio_outw( *(__b2 + __i), r); \
-					} \
-				})
-
-#define insw(args...)	mmio_insw(args)
-#define mmio_insw(r,b,l) 	({	int __i ;  \
-					word *__b2;  \
-					__b2 = (word *) b;  \
-					for (__i = 0; __i < l; __i++) {  \
-					  *(__b2 + __i) = mmio_inw(r);  \
-					  mmio_inw(0);  \
-					};  \
-				})
-
-/*------------------------------------------------------------------------
- .
- . The internal workings of the driver.  If you are changing anything
- . here with the 3Com stuff, you should have the datasheet and know
- . what you are doing.
- .
- -------------------------------------------------------------------------*/
-#define EL_BASE_ADDR	0x20000000
-
-
-/* Offsets from base I/O address. */
-#define EL3_DATA	0x00
-#define EL3_TIMER	0x0a
-#define EL3_CMD		0x0e
-#define EL3_STATUS	0x0e
-
-#define EEPROM_READ	0x0080
-
-#define EL3WINDOW(win_num) mmio_outw(SelectWindow + (win_num), EL_BASE_ADDR + EL3_CMD)
-
-/* The top five bits written to EL3_CMD are a command, the lower
-   11 bits are the parameter, if applicable. */
-enum c509cmd {
-    TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
-    RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11,
-    TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
-    FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
-    SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
-    SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11,
-    StatsDisable = 22<<11, StopCoax = 23<<11,
-};
-
-enum c509status {
-    IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
-    TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
-    IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000
-};
-
-/* The SetRxFilter command accepts the following classes: */
-enum RxFilter {
-    RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
-};
-
-/* Register window 1 offsets, the window used in normal operation. */
-#define TX_FIFO		0x00
-#define RX_FIFO		0x00
-#define RX_STATUS 	0x08
-#define TX_STATUS 	0x0B
-#define TX_FREE		0x0C	/* Remaining free bytes in Tx buffer. */
-
-
-/*
-  Read a word from the EEPROM using the regular EEPROM access register.
-  Assume that we are in register window zero.
-*/
-static word read_eeprom(dword ioaddr, int index)
-{
-    int i;
-    outw(EEPROM_READ + index, ioaddr + 0xa);
-    /* Reading the eeprom takes 162 us */
-    for (i = 1620; i >= 0; i--)
-	if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0)
-	    break;
-    return inw(ioaddr + 0xc);
-}
-
-static void el_get_mac_addr( unsigned char *mac_addr )
-{
-	int i;
-	union
-	{
-		word w;
-		unsigned char b[2];
-	} wrd;
-	unsigned char old_window = inw( EL_BASE_ADDR + EL3_STATUS ) >> 13;
-	GO_WINDOW(0);
-	VX_BUSY_WAIT;
-	for (i = 0; i < 3; i++)
-	{
-		wrd.w = read_eeprom(EL_BASE_ADDR, 0xa+i);
-#ifdef __BIG_ENDIAN
-		mac_addr[2*i]   = wrd.b[0];
-		mac_addr[2*i+1] = wrd.b[1];
-#else
-		mac_addr[2*i]   = wrd.b[1];
-		mac_addr[2*i+1] = wrd.b[0];
-#endif
-	}
-	GO_WINDOW(old_window);
-	VX_BUSY_WAIT;
-}
-
-
-#if EL_DEBUG > 1
-static void print_packet( byte * buf, int length )
-{
-	int i;
-	int remainder;
-	int lines;
-
-	PRINTK2("Packet of length %d \n", length );
-
-	lines = length / 16;
-	remainder = length % 16;
-
-	for ( i = 0; i < lines ; i ++ ) {
-		int cur;
-
-		for ( cur = 0; cur < 8; cur ++ ) {
-			byte a, b;
-
-			a = *(buf ++ );
-			b = *(buf ++ );
-			PRINTK2("%02x%02x ", a, b );
-		}
-		PRINTK2("\n");
-	}
-	for ( i = 0; i < remainder/2 ; i++ ) {
-		byte a, b;
-
-		a = *(buf ++ );
-		b = *(buf ++ );
-		PRINTK2("%02x%02x ", a, b );
-	}
-	PRINTK2("\n");
-}
-#endif /* EL_DEBUG > 1 */
-
-
-/**************************************************************************
-ETH_RESET - Reset adapter
-***************************************************************************/
-static void el_reset(bd_t *bd)
-{
-	/***********************************************************
-			Reset 3Com 595 card
-	*************************************************************/
-	/* QUICK HACK
-	 * - adjust timing for 3c589
-	 * - enable io for PCMCIA */
-	outw(0x0004, 0xa0000018);
-	udelay(100);
-	outw(0x0041, 0x28010000);
-	udelay(100);
-
-	/* issue global reset */
-	outw(GLOBAL_RESET, BASE + VX_COMMAND);
-
-	/* must wait for at least 1ms */
-	udelay(100000000);
-
-	/* set mac addr */
-	{
-		unsigned char *mac_addr = bd->bi_enetaddr;
-		int i;
-
-		el_get_mac_addr( mac_addr );
-
-		GO_WINDOW(2);
-		VX_BUSY_WAIT;
-
-		printf("3C589 MAC Addr.: ");
-		for (i = 0; i < 6; i++)
-		{
-			printf("%02x", mac_addr[i]);
-			outb(mac_addr[i], BASE + VX_W2_ADDR_0 + i);
-			VX_BUSY_WAIT;
-		}
-		printf("\n\n");
-	}
-
-	/* set RX filter */
-	outw(SET_RX_FILTER | FIL_INDIVIDUAL | FIL_BRDCST, BASE + VX_COMMAND);
-	VX_BUSY_WAIT;
-
-
-	/* set irq mask and read_zero */
-	outw(SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
-		S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
-	VX_BUSY_WAIT;
-
-	outw(SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
-		S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
-	VX_BUSY_WAIT;
-
-	/* enable TP Linkbeat */
-	GO_WINDOW(4);
-	VX_BUSY_WAIT;
-
-	outw( ENABLE_UTP, BASE + VX_W4_MEDIA_TYPE);
-	VX_BUSY_WAIT;
-
-
-/*
- * Attempt to get rid of any stray interrupts that occured during
- * configuration.  On the i386 this isn't possible because one may
- * already be queued.  However, a single stray interrupt is
- * unimportant.
- */
-
-	outw(ACK_INTR | 0xff, BASE + VX_COMMAND);
-	VX_BUSY_WAIT;
-
-	/* enable TX and RX */
-	outw( RX_ENABLE, BASE + VX_COMMAND );
-	VX_BUSY_WAIT;
-
-	outw( TX_ENABLE, BASE + VX_COMMAND );
-	VX_BUSY_WAIT;
-
-
-	/* print the diag. regs. */
-	PRINTK2("Diag. Regs\n");
-	PRINTK2("--> MEDIA_TYPE:   %04x\n", inw(BASE + VX_W4_MEDIA_TYPE));
-	PRINTK2("--> NET_DIAG:     %04x\n", inw(BASE + VX_W4_NET_DIAG));
-	PRINTK2("--> FIFO_DIAG:    %04x\n", inw(BASE + VX_W4_FIFO_DIAG));
-	PRINTK2("--> CTRLR_STATUS: %04x\n", inw(BASE + VX_W4_CTRLR_STATUS));
-	PRINTK2("\n\n");
-
-	/* enter working mode */
-	GO_WINDOW(1);
-	VX_BUSY_WAIT;
-
-	/* wait for another 1ms */
-	udelay(100000000);
-}
-
-
-/*-----------------------------------------------------------------
- .
- .  The driver can be entered at any of the following entry points.
- .
- .------------------------------------------------------------------  */
-
-extern int eth_init(bd_t *bd);
-extern void eth_halt(void);
-extern int eth_rx(void);
-extern int eth_send(volatile void *packet, int length);
-
-
-/*
- ------------------------------------------------------------
- .
- . Internal routines
- .
- ------------------------------------------------------------
-*/
-
-int eth_init(bd_t *bd)
-{
-	el_reset(bd);
-	return 0;
-}
-
-void eth_halt() {
-	return;
-}
-
-#define EDEBUG 1
-
-
-/**************************************************************************
-ETH_POLL - Wait for a frame
-***************************************************************************/
-
-int eth_rx()
-{
-	word status, rx_status, packet_size;
-
-	VX_BUSY_WAIT;
-
-	status = inw( BASE + VX_STATUS );
-
-	if ( (status & S_RX_COMPLETE) == 0 ) return 0; /* nothing to do */
-
-	/* Packet waiting -> check RX_STATUS */
-	rx_status = inw( BASE + VX_W1_RX_STATUS );
-
-	if ( rx_status & ERR_RX )
-	{
-		/* error in packet -> discard */
-		PRINTK("[ERROR] Invalid packet -> discarding\n");
-		PRINTK("-- error code 0x%02x\n", rx_status & ERR_MASK);
-		PRINTK("-- rx bytes 0x%04d\n", rx_status & ((1<<11) - 1));
-		PRINTK("[ERROR] Invalid packet -> discarding\n");
-		outw( RX_DISCARD_TOP_PACK, BASE + VX_COMMAND );
-		return 0;
-	}
-
-	/* correct pack. waiting in fifo */
-	packet_size = rx_status & RX_BYTES_MASK;
-
-	PRINTK("Correct packet waiting in fifo, size: %d\n", packet_size);
-
-	{
-		volatile word *packet_start = (word *)(BASE + VX_W1_RX_PIO_RD_1);
-		word *RcvBuffer = (word *)(NetRxPackets[0]);
-		int wcount = 0;
-
-		for (wcount = 0; wcount < (packet_size >> 1); wcount++)
-		{
-			*RcvBuffer++ = *(packet_start);
-		}
-
-		/* handle odd packets */
-		if ( packet_size & 1 )
-		{
-			*RcvBuffer++ = *(packet_start);
-		}
-	}
-
-	/* fifo should now be empty (besides the padding bytes) */
-	if ( ((*((word *)(BASE + VX_W1_RX_STATUS))) & RX_BYTES_MASK) > 3 )
-	{
-		PRINTK("[ERROR] Fifo not empty after packet read (remaining pkts: %d)\n",
-			(((*(word *)(BASE + VX_W1_RX_STATUS))) & RX_BYTES_MASK));
-	}
-
-	/* discard packet */
-	*((word *)(BASE + VX_COMMAND)) = RX_DISCARD_TOP_PACK;
-
-	/* Pass Packets to upper Layer */
-	NetReceive(NetRxPackets[0], packet_size);
-	return packet_size;
-}
-
-
-/**************************************************************************
-ETH_TRANSMIT - Transmit a frame
-***************************************************************************/
-static char padmap[] = {
-	0, 3, 2, 1};
-
-
-int eth_send(volatile void *packet, int length) {
-	int pad;
-	int status;
-	volatile word *buf = (word *)packet;
-	int dummy = 0;
-
-	/* padding stuff */
-	pad = padmap[length & 3];
-
-	PRINTK("eth_send(), length: %d\n", length);
-	/* drop acknowledgements */
-	while(( status=inb(EL_BASE_ADDR + VX_W1_TX_STATUS) )& TXS_COMPLETE ) {
-		if(status & (TXS_UNDERRUN|TXS_MAX_COLLISION|TXS_STATUS_OVERFLOW)) {
-			outw(TX_RESET, EL_BASE_ADDR + VX_COMMAND);
-			outw(TX_ENABLE, EL_BASE_ADDR + VX_COMMAND);
-			PRINTK("Bad status, resetting and reenabling transmitter\n");
-		}
-
-		outb(0x0, EL_BASE_ADDR + VX_W1_TX_STATUS);
-	}
-
-
-	while (inw(EL_BASE_ADDR + VX_W1_FREE_TX) < length + pad + 4) {
-		/* no room in FIFO */
-		if (dummy == 0)
-		{
-			PRINTK("No room in FIFO, waiting...\n");
-			dummy++;
-		}
-
-	}
-
-	PRINTK("    ---> FIFO ready\n");
-
-
-	outw(length, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
-
-	/* Second dword meaningless */
-	outw(0x0, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
-
-#if EL_DEBUG > 1
-	print_packet((byte *)buf, length);
-#endif
-
-	/* write packet */
-	{
-		unsigned int i, totw;
-
-		totw = ((length + 1) >> 1);
-		PRINTK("Buffer: (totw = %d)\n", totw);
-		for (i = 0; i < totw; i++) {
-			outw( *(buf+i), EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
-			udelay(10);
-		}
-		if(totw & 1)
-		{	/* pad to double word length */
-			outw( 0, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
-			udelay(10);
-		}
-		PRINTK("\n\n");
-	}
-
-	/* wait for Tx complete */
-	PRINTK("Waiting for Tx to complete...\n");
-	while(((status = inw(EL_BASE_ADDR + VX_STATUS)) & S_COMMAND_IN_PROGRESS) != 0)
-	{
-		udelay(10);
-	}
-	PRINTK("   ---> Tx completed, status = 0x%04x\n", status);
-
-	return length;
-}
-
-
-#endif /* CONFIG_DRIVER_3C589 */