ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

7 files changed, 42 insertions, 42 deletions

diff --git a/doc/README.PIP405 b/doc/README.PIP405
index d8b3f9c..e8a6541 100644
--- a/doc/README.PIP405
+++ b/doc/README.PIP405
@@ -17,11 +17,11 @@ Changed files:
 				added console settings from environment
 - common/devices.c		added ISA keyboard init
 - common/main.c			corrected the read of bootdelay
-- cpu/ppc4xx/405gp_pci.c	excluded file from PIP405
-- cpu/ppc4xx/i2c.c		added 16bit read write I2C support
+- arch/ppc/cpu/ppc4xx/405gp_pci.c	excluded file from PIP405
+- arch/ppc/cpu/ppc4xx/i2c.c		added 16bit read write I2C support
 				added page write
-- cpu/ppc4xx/speed.c		added get_PCI_freq
-- cpu/ppc4xx/start.S		added CONFIG_IDENT_STRING
+- arch/ppc/cpu/ppc4xx/speed.c		added get_PCI_freq
+- arch/ppc/cpu/ppc4xx/start.S		added CONFIG_IDENT_STRING
 - disk/Makefile			added part_iso for CD support
 - disk/part.c			changed to work with block device description
 				added ISO CD support
@@ -275,7 +275,7 @@ Added the config variable CONFIG_IDENT_STRING which will be added to the
 "U_BOOT_VERSION __TIME__ DATE___ " String, to allows to identify intermidiate
 and custom versions.
 Changed files:
-- cpu/ppc4xx/start.s
+- arch/ppc/cpu/ppc4xx/start.s
 
 Firmware Image:
 ---------------
@@ -288,11 +288,11 @@ Changed files:
 
 Correct PCI Frequency for PPC405:
 ---------------------------------
-Added function (in cpu/ppc4xx/speed.c) to get the PCI frequency for PPC405 CPU.
+Added function (in arch/ppc/cpu/ppc4xx/speed.c) to get the PCI frequency for PPC405 CPU.
 The PCI Frequency will now be set correct in the board description in common/board.c.
 (was set to the busfreq before).
 Changed files:
-- cpu/ppc4xx/speed.c
+- arch/ppc/cpu/ppc4xx/speed.c
 - common/board.c
 
 I2C Stuff:
@@ -301,7 +301,7 @@ Added defined(CONFIG_PIP405) at several points in common/cmd_i2c.c.
 Added 16bit read/write support for I2C (PPC405), and page write to
 I2C EEPROM if defined CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE.
 Changed files:
-- cpu/ppc4xx/i2c.c
+- arch/ppc/cpu/ppc4xx/i2c.c
 - common/cmd_i2c.c
 
 Environment / Console:
diff --git a/doc/README.POST b/doc/README.POST
index a81e079..0d5e20e 100644
--- a/doc/README.POST
+++ b/doc/README.POST
@@ -713,7 +713,7 @@ use external loopback for testing. That will need appropriate
 reconfiguration of the physical interface chip.
 
 The test routines for the SCC ethernet tests will be located in
-cpu/mpc8xx/scc.c.
+arch/ppc/cpu/mpc8xx/scc.c.
 
 2.2.3.2. UART tests (SMC/SCC)
 
@@ -725,7 +725,7 @@ will be transmitted. These tests may be enhanced to make to perform
 test will be executed manually.
 
 The test routine for the SMC/SCC UART tests will be located in
-cpu/mpc8xx/serial.c.
+arch/ppc/cpu/mpc8xx/serial.c.
 
 2.2.3.3. USB test
 
diff --git a/doc/README.RPXlite b/doc/README.RPXlite
index c0238ae..0aa4d11 100644
--- a/doc/README.RPXlite
+++ b/doc/README.RPXlite
@@ -116,7 +116,7 @@
 	board/RPXLITE/RPXLITE.c		/* DRAM-related routines */
 	board/RPXLITE/flash.c		/* flash-related routines */
 	board/RPXLITE/config.mk		/* set text base address */
-	cpu/mpc8xx/serial.c			/* board specific register setting */
+	arch/ppc/cpu/mpc8xx/serial.c			/* board specific register setting */
 	include/config_RPXLITE.h	/* board specific registers */
 
 	See 'reg_config.txt' for register values in detail.
diff --git a/doc/README.TQM8260 b/doc/README.TQM8260
index b93a1cb..e64e64a 100644
--- a/doc/README.TQM8260
+++ b/doc/README.TQM8260
@@ -14,10 +14,10 @@ The following common files have been modified by this project:
 
 MAKEALL			- TQM8260 entry added
 Makefile		- TQM8260_config entry added
-cpu/mpc8260/Makefile	- soft_i2c.o module added
-cpu/mpc8260/ether_scc.c	- TQM8260-specific definitions added, an obvious
+arch/ppc/cpu/mpc8260/Makefile	- soft_i2c.o module added
+arch/ppc/cpu/mpc8260/ether_scc.c	- TQM8260-specific definitions added, an obvious
 			  bug fixed (fcr -> scr)
-cpu/mpc8260/ether_fcc.c	- TQM8260-specific definitions added
+arch/ppc/cpu/mpc8260/ether_fcc.c	- TQM8260-specific definitions added
 include/flash.h		- added definitions for the AM29LV640D Flash chip
 
 
@@ -33,7 +33,7 @@ board/tqm8260/config.mk	  - config file
 board/tqm8260/flash.c	  - flash driver (for AM29LV640D)
 board/tqm8260/ppcboot.lds - linker script
 board/tqm8260/tqm8260.c	  - ioport and memory initialization
-cpu/mpc8260/soft_i2c.c	  - software i2c EEPROM driver
+arch/ppc/cpu/mpc8260/soft_i2c.c	  - software i2c EEPROM driver
 include/config_TQM8260.h  - main configuration file
 
 
diff --git a/doc/README.alaska8220 b/doc/README.alaska8220
index 279dac6..9249cfb 100644
--- a/doc/README.alaska8220
+++ b/doc/README.alaska8220
@@ -37,24 +37,24 @@ Added files:
 - board/alaska/config.mk    config make
 - board/alaska/u-boot.lds   Linker description
 
-- cpu/mpc8220/dma.h	    multi-channel dma header file
-- cpu/mpc8220/dramSetup.h   dram setup header file
-- cpu/mpc8220/fec.h	    MPC8220 FEC header file
-- cpu/mpc8220/cpu.c	    cpu specific code
-- cpu/mpc8220/cpu_init.c    Flexbus ChipSelect and Mux pins setup
-- cpu/mpc8220/dramSetup.c   MPC8220 DDR SDRAM setup
-- cpu/mpc8220/fec.c	    MPC8220 FEC driver
-- cpu/mpc8220/i2c.c	    MPC8220 I2C driver
-- cpu/mpc8220/interrupts.c  interrupt support (not enable)
-- cpu/mpc8220/loadtask.c    load dma
-- cpu/mpc8220/speed.c	    system, pci, flexbus, pev, and cpu clock
-- cpu/mpc8220/traps.c	    exception
-- cpu/mpc8220/uart.c	    MPC8220 UART driver
-- cpu/mpc8220/Makefile	    Makefile
-- cpu/mpc8220/config.mk	    config make
-- cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program
-- cpu/mpc8220/io.S	    io functions
-- cpu/mpc8220/start.S	    start up
+- arch/ppc/cpu/mpc8220/dma.h	    multi-channel dma header file
+- arch/ppc/cpu/mpc8220/dramSetup.h   dram setup header file
+- arch/ppc/cpu/mpc8220/fec.h	    MPC8220 FEC header file
+- arch/ppc/cpu/mpc8220/cpu.c	    cpu specific code
+- arch/ppc/cpu/mpc8220/cpu_init.c    Flexbus ChipSelect and Mux pins setup
+- arch/ppc/cpu/mpc8220/dramSetup.c   MPC8220 DDR SDRAM setup
+- arch/ppc/cpu/mpc8220/fec.c	    MPC8220 FEC driver
+- arch/ppc/cpu/mpc8220/i2c.c	    MPC8220 I2C driver
+- arch/ppc/cpu/mpc8220/interrupts.c  interrupt support (not enable)
+- arch/ppc/cpu/mpc8220/loadtask.c    load dma
+- arch/ppc/cpu/mpc8220/speed.c	    system, pci, flexbus, pev, and cpu clock
+- arch/ppc/cpu/mpc8220/traps.c	    exception
+- arch/ppc/cpu/mpc8220/uart.c	    MPC8220 UART driver
+- arch/ppc/cpu/mpc8220/Makefile	    Makefile
+- arch/ppc/cpu/mpc8220/config.mk	    config make
+- arch/ppc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program
+- arch/ppc/cpu/mpc8220/io.S	    io functions
+- arch/ppc/cpu/mpc8220/start.S	    start up
 
 - include/mpc8220.h
 
diff --git a/doc/README.bedbug b/doc/README.bedbug
index 2616acc..4c1e6c4 100644
--- a/doc/README.bedbug
+++ b/doc/README.bedbug
@@ -18,15 +18,15 @@ can be easily implemented.
 ./common/board.c
 	Added call to initialize debugger on startup.
 
-./cpu/ppc4xx/Makefile
+./arch/ppc/cpu/ppc4xx/Makefile
 	Added bedbug_405.c to the Makefile.
 
-./cpu/ppc4xx/start.S
+./arch/ppc/cpu/ppc4xx/start.S
 	Added code to handle the debug exception (0x2000) on the 405.
 	Also added code to handle critical exceptions since the debug
 	is treated as critical on the 405.
 
-./cpu/ppc4xx/traps.c
+./arch/ppc/cpu/ppc4xx/traps.c
 	Added more detailed output for the program exception to tell
 	if it is an illegal instruction, privileged instruction or
 	a trap. Also added debug trap handler.
@@ -51,7 +51,7 @@ can be easily implemented.
 	hardware breakpoints and stepping through code.  These
 	routines are common to all PowerPC processors.
 
-./cpu/ppc4xx/bedbug_405.c
+./arch/ppc/cpu/ppc4xx/bedbug_405.c
 	AMCC  PPC405 specific debugger routines.
 
 
@@ -63,16 +63,16 @@ Changes:
 	common/cmd_bedbug.c
 		Added call to initialize 860 debugger.
 
-	cpu/mpc8xx/Makefile
+	arch/ppc/cpu/mpc8xx/Makefile
 		Added new file "bedbug_860.c" to the makefile
 
-	cpu/mpc8xx/start.S
+	arch/ppc/cpu/mpc8xx/start.S
 		Added handler for InstructionBreakpoint (0xfd00)
 
-	cpu/mpc8xx/traps.c
+	arch/ppc/cpu/mpc8xx/traps.c
 		Added new routine DebugException()
 
 New Files:
 
-	cpu/mpc8xx/bedbug_860.c
+	arch/ppc/cpu/mpc8xx/bedbug_860.c
 		CPU-specific routines for 860 debug registers.
diff --git a/doc/README.mpc5xx b/doc/README.mpc5xx
index 2e12174..26fb0c2 100644
--- a/doc/README.mpc5xx
+++ b/doc/README.mpc5xx
@@ -25,7 +25,7 @@ Added or Changed Files:
 u-boot-0.2.0/common/cmd_boot.c
 u-boot-0.2.0/common/cmd_reginfo.c
 u-boot-0.2.0/common/environment.c
-u-boot-0.2.0/cpu/mpc5xx/*
+u-boot-0.2.0/arch/ppc/cpu/mpc5xx/*
 u-boot-0.2.0/include/cmd_reginfo.h
 u-boot-0.2.0/include/common.h
 u-boot-0.2.0/include/ppc_asm.tmpl